diff options
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
| -rw-r--r-- | drivers/usb/serial/cp210x.c | 59 |
1 files changed, 36 insertions, 23 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fd67cc53545..adfe660ed00 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -92,6 +92,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ + { USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */ { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */ { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ @@ -280,7 +281,10 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, dbg("%s - Unable to send config request, " "request=0x%x size=%d result=%d\n", __func__, request, size, result); - return -EPROTO; + if (result > 0) + result = -EPROTO; + + return result; } return 0; @@ -331,7 +335,10 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, dbg("%s - Unable to send request, " "request=0x%x size=%d result=%d\n", __func__, request, size, result); - return -EPROTO; + if (result > 0) + result = -EPROTO; + + return result; } return 0; @@ -395,10 +402,11 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) dbg("%s - port %d", __func__, port->number); - if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) { - dev_err(&port->dev, "%s - Unable to enable UART\n", - __func__); - return -EPROTO; + result = cp210x_set_config_single(port, CP210X_IFC_ENABLE, + UART_ENABLE); + if (result) { + dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); + return result; } result = usb_serial_generic_open(tty, port); @@ -520,18 +528,13 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, cflag |= PARENB; break; case BITS_PARITY_MARK: - dbg("%s - parity = MARK (not supported, disabling parity)", - __func__); - cflag &= ~PARENB; - bits &= ~BITS_PARITY_MASK; - cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + dbg("%s - parity = MARK", __func__); + cflag |= (PARENB|PARODD|CMSPAR); break; case BITS_PARITY_SPACE: - dbg("%s - parity = SPACE (not supported, disabling parity)", - __func__); - cflag &= ~PARENB; - bits &= ~BITS_PARITY_MASK; - cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + dbg("%s - parity = SPACE", __func__); + cflag &= ~PARODD; + cflag |= (PARENB|CMSPAR); break; default: dbg("%s - Unknown parity mode, disabling parity", __func__); @@ -588,7 +591,6 @@ static void cp210x_set_termios(struct tty_struct *tty, if (!tty) return; - tty->termios->c_cflag &= ~CMSPAR; cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty)); @@ -643,16 +645,27 @@ static void cp210x_set_termios(struct tty_struct *tty, "not supported by device\n"); } - if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { + if ((cflag & (PARENB|PARODD|CMSPAR)) != + (old_cflag & (PARENB|PARODD|CMSPAR))) { cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { - if (cflag & PARODD) { - bits |= BITS_PARITY_ODD; - dbg("%s - parity = ODD", __func__); + if (cflag & CMSPAR) { + if (cflag & PARODD) { + bits |= BITS_PARITY_MARK; + dbg("%s - parity = MARK", __func__); + } else { + bits |= BITS_PARITY_SPACE; + dbg("%s - parity = SPACE", __func__); + } } else { - bits |= BITS_PARITY_EVEN; - dbg("%s - parity = EVEN", __func__); + if (cflag & PARODD) { + bits |= BITS_PARITY_ODD; + dbg("%s - parity = ODD", __func__); + } else { + bits |= BITS_PARITY_EVEN; + dbg("%s - parity = EVEN", __func__); + } } } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) |