diff options
Diffstat (limited to 'drivers/usb/serial/cypress_m8.c')
| -rw-r--r-- | drivers/usb/serial/cypress_m8.c | 111 |
1 files changed, 66 insertions, 45 deletions
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 155b82a25d1..c42d3bdbe98 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -122,6 +122,11 @@ static struct usb_driver cypress_driver = { .no_dynamic_id = 1, }; +enum packet_format { + packet_format_1, /* b0:status, b1:payload count */ + packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */ +}; + struct cypress_private { spinlock_t lock; /* private lock */ int chiptype; /* identifier of device, for quirks/etc */ @@ -139,6 +144,7 @@ struct cypress_private { __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */ __u8 current_config; /* stores the current configuration byte */ __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */ + enum packet_format pkt_fmt; /* format to use for packet send / receive */ int baud_rate; /* stores current baud rate in integer form */ int cbr_mask; /* stores current baud rate in masked form */ int isthrottled; /* if throttled, discard reads */ @@ -532,6 +538,17 @@ static int generic_startup (struct usb_serial *serial) priv->termios_initialized = 0; priv->rx_flags = 0; priv->cbr_mask = B300; + /* Default packet format setting is determined by packet size. + Anything with a size larger then 9 must have a separate + count field since the 3 bit count field is otherwise too + small. Otherwise we can use the slightly more compact + format. This is in accordance with the cypress_m8 serial + converter app note. */ + if (port->interrupt_out_size > 9) { + priv->pkt_fmt = packet_format_1; + } else { + priv->pkt_fmt = packet_format_2; + } if (interval > 0) { priv->write_urb_interval = interval; priv->read_urb_interval = interval; @@ -564,6 +581,9 @@ static int cypress_earthmate_startup (struct usb_serial *serial) priv = usb_get_serial_port_data(serial->port[0]); priv->chiptype = CT_EARTHMATE; + /* All Earthmate devices use the separated-count packet + format! Idiotic. */ + priv->pkt_fmt = packet_format_1; return 0; } /* cypress_earthmate_startup */ @@ -811,21 +831,18 @@ static void cypress_send(struct usb_serial_port *port) memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size); spin_lock_irqsave(&priv->lock, flags); - switch (port->interrupt_out_size) { - case 32: - /* this is for the CY7C64013... */ - offset = 2; - port->interrupt_out_buffer[0] = priv->line_control; - break; - case 8: - /* this is for the CY7C63743... */ - offset = 1; - port->interrupt_out_buffer[0] = priv->line_control; - break; - default: - dbg("%s - wrong packet size", __FUNCTION__); - spin_unlock_irqrestore(&priv->lock, flags); - return; + switch (priv->pkt_fmt) { + default: + case packet_format_1: + /* this is for the CY7C64013... */ + offset = 2; + port->interrupt_out_buffer[0] = priv->line_control; + break; + case packet_format_2: + /* this is for the CY7C63743... */ + offset = 1; + port->interrupt_out_buffer[0] = priv->line_control; + break; } if (priv->line_control & CONTROL_RESET) @@ -846,12 +863,13 @@ static void cypress_send(struct usb_serial_port *port) return; } - switch (port->interrupt_out_size) { - case 32: - port->interrupt_out_buffer[1] = count; - break; - case 8: - port->interrupt_out_buffer[0] |= count; + switch (priv->pkt_fmt) { + default: + case packet_format_1: + port->interrupt_out_buffer[1] = count; + break; + case packet_format_2: + port->interrupt_out_buffer[0] |= count; } dbg("%s - count is %d", __FUNCTION__, count); @@ -864,8 +882,9 @@ send: if (priv->cmd_ctrl) actual_size = 1; else - actual_size = count + (port->interrupt_out_size == 32 ? 2 : 1); - + actual_size = count + + (priv->pkt_fmt == packet_format_1 ? 2 : 1); + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size, port->interrupt_out_urb->transfer_buffer); @@ -1331,30 +1350,32 @@ static void cypress_read_int_callback(struct urb *urb) } spin_lock_irqsave(&priv->lock, flags); - switch(urb->actual_length) { - case 32: - /* This is for the CY7C64013... */ - priv->current_status = data[0] & 0xF8; - bytes = data[1] + 2; - i = 2; - if (bytes > 2) - havedata = 1; - break; - case 8: - /* This is for the CY7C63743... */ - priv->current_status = data[0] & 0xF8; - bytes = (data[0] & 0x07) + 1; - i = 1; - if (bytes > 1) - havedata = 1; - break; - default: - dbg("%s - wrong packet size - received %d bytes", - __FUNCTION__, urb->actual_length); - spin_unlock_irqrestore(&priv->lock, flags); - goto continue_read; + result = urb->actual_length; + switch (priv->pkt_fmt) { + default: + case packet_format_1: + /* This is for the CY7C64013... */ + priv->current_status = data[0] & 0xF8; + bytes = data[1] + 2; + i = 2; + if (bytes > 2) + havedata = 1; + break; + case packet_format_2: + /* This is for the CY7C63743... */ + priv->current_status = data[0] & 0xF8; + bytes = (data[0] & 0x07) + 1; + i = 1; + if (bytes > 1) + havedata = 1; + break; } spin_unlock_irqrestore(&priv->lock, flags); + if (result < bytes) { + dbg("%s - wrong packet size - received %d bytes but packet " + "said %d bytes", __func__, result, bytes); + goto continue_read; + } usb_serial_debug_data (debug, &port->dev, __FUNCTION__, urb->actual_length, data); |