summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/ftdi_sio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
-rw-r--r--drivers/usb/serial/ftdi_sio.c179
1 files changed, 140 insertions, 39 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 683304d6061..3dc3768ca71 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -47,7 +47,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.4.3"
+#define DRIVER_VERSION "v1.5.0"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
@@ -82,7 +82,8 @@ struct ftdi_private {
int rx_processed;
unsigned long rx_bytes;
- __u16 interface; /* FT2232C port interface (0 for FT232/245) */
+ __u16 interface; /* FT2232C, FT2232H or FT4232H port interface
+ (0 for FT232/245) */
speed_t force_baud; /* if non-zero, force the baud rate to
this value */
@@ -94,6 +95,7 @@ struct ftdi_private {
unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
unsigned long tx_outstanding_urbs;
+ unsigned short max_packet_size;
};
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -164,6 +166,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -673,6 +676,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -693,12 +697,13 @@ static const char *ftdi_chip_name[] = {
[FT232BM] = "FT232BM",
[FT2232C] = "FT2232C",
[FT232RL] = "FT232RL",
+ [FT2232H] = "FT2232H",
+ [FT4232H] = "FT4232H"
};
/* Constants for read urb and write urb */
#define BUFSZ 512
-#define PKTSZ 64
/* rx_flags */
#define THROTTLED 0x01
@@ -715,7 +720,6 @@ static const char *ftdi_chip_name[] = {
/* function prototypes for a FTDI serial converter */
static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id);
-static void ftdi_shutdown(struct usb_serial *serial);
static int ftdi_sio_port_probe(struct usb_serial_port *port);
static int ftdi_sio_port_remove(struct usb_serial_port *port);
static int ftdi_open(struct tty_struct *tty,
@@ -744,6 +748,8 @@ static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor(int baud);
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor(int baud);
+static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
+static __u32 ftdi_2232h_baud_to_divisor(int baud);
static struct usb_serial_driver ftdi_sio_device = {
.driver = {
@@ -772,7 +778,6 @@ static struct usb_serial_driver ftdi_sio_device = {
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
- .shutdown = ftdi_shutdown,
};
@@ -838,6 +843,36 @@ static __u32 ftdi_232bm_baud_to_divisor(int baud)
return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
}
+static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
+{
+ static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
+ __u32 divisor;
+ int divisor3;
+
+ /* hi-speed baud rate is 10-bit sampling instead of 16-bit */
+ divisor3 = (base / 10 / baud) * 8;
+
+ divisor = divisor3 >> 3;
+ divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
+ /* Deal with special cases for highest baud rates. */
+ if (divisor == 1)
+ divisor = 0;
+ else if (divisor == 0x4001)
+ divisor = 1;
+ /*
+ * Set this bit to turn off a divide by 2.5 on baud rate generator
+ * This enables baud rates up to 12Mbaud but cannot reach below 1200
+ * baud with this bit set
+ */
+ divisor |= 0x00020000;
+ return divisor;
+}
+
+static __u32 ftdi_2232h_baud_to_divisor(int baud)
+{
+ return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
+}
+
#define set_mctrl(port, set) update_mctrl((port), (set), 0)
#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
@@ -996,6 +1031,19 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
baud = 9600;
}
break;
+ case FT2232H: /* FT2232H chip */
+ case FT4232H: /* FT4232H chip */
+ if ((baud <= 12000000) & (baud >= 1200)) {
+ div_value = ftdi_2232h_baud_to_divisor(baud);
+ } else if (baud < 1200) {
+ div_value = ftdi_232bm_baud_to_divisor(baud);
+ } else {
+ dbg("%s - Baud rate too high!", __func__);
+ div_value = ftdi_232bm_baud_to_divisor(9600);
+ div_okay = 0;
+ baud = 9600;
+ }
+ break;
} /* priv->chip_type */
if (div_okay) {
@@ -1196,14 +1244,29 @@ static void ftdi_determine_type(struct usb_serial_port *port)
if (interfaces > 1) {
int inter;
- /* Multiple interfaces. Assume FT2232C. */
- priv->chip_type = FT2232C;
+ /* Multiple interfaces.*/
+ if (version == 0x0800) {
+ priv->chip_type = FT4232H;
+ /* Hi-speed - baud clock runs at 120MHz */
+ priv->baud_base = 120000000 / 2;
+ } else if (version == 0x0700) {
+ priv->chip_type = FT2232H;
+ /* Hi-speed - baud clock runs at 120MHz */
+ priv->baud_base = 120000000 / 2;
+ } else
+ priv->chip_type = FT2232C;
+
/* Determine interface code. */
inter = serial->interface->altsetting->desc.bInterfaceNumber;
- if (inter == 0)
- priv->interface = PIT_SIOA;
- else
- priv->interface = PIT_SIOB;
+ if (inter == 0) {
+ priv->interface = INTERFACE_A;
+ } else if (inter == 1) {
+ priv->interface = INTERFACE_B;
+ } else if (inter == 2) {
+ priv->interface = INTERFACE_C;
+ } else if (inter == 3) {
+ priv->interface = INTERFACE_D;
+ }
/* BM-type devices have a bug where bcdDevice gets set
* to 0x200 when iSerialNumber is 0. */
if (version < 0x500) {
@@ -1231,6 +1294,45 @@ static void ftdi_determine_type(struct usb_serial_port *port)
}
+/* Determine the maximum packet size for the device. This depends on the chip
+ * type and the USB host capabilities. The value should be obtained from the
+ * device descriptor as the chip will use the appropriate values for the host.*/
+static void ftdi_set_max_packet_size(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ struct usb_device *udev = serial->dev;
+
+ struct usb_interface *interface = serial->interface;
+ struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
+
+ unsigned num_endpoints;
+ int i = 0;
+
+ num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
+ dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
+
+ /* NOTE: some customers have programmed FT232R/FT245R devices
+ * with an endpoint size of 0 - not good. In this case, we
+ * want to override the endpoint descriptor setting and use a
+ * value of 64 for wMaxPacketSize */
+ for (i = 0; i < num_endpoints; i++) {
+ dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
+ interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
+ ep_desc = &interface->cur_altsetting->endpoint[i].desc;
+ if (ep_desc->wMaxPacketSize == 0) {
+ ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
+ dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i);
+ }
+ }
+
+ /* set max packet size based on descriptor */
+ priv->max_packet_size = ep_desc->wMaxPacketSize;
+
+ dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
+}
+
+
/*
* ***************************************************************************
* Sysfs Attribute
@@ -1314,7 +1416,9 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
if ((!retval) &&
(priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
- priv->chip_type == FT232RL)) {
+ priv->chip_type == FT232RL ||
+ priv->chip_type == FT2232H ||
+ priv->chip_type == FT4232H)) {
retval = device_create_file(&port->dev,
&dev_attr_latency_timer);
}
@@ -1333,7 +1437,9 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
device_remove_file(&port->dev, &dev_attr_event_char);
if (priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
- priv->chip_type == FT232RL) {
+ priv->chip_type == FT232RL ||
+ priv->chip_type == FT2232H ||
+ priv->chip_type == FT4232H) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
@@ -1416,6 +1522,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
+ ftdi_set_max_packet_size(port);
read_latency_timer(port);
create_sysfs_attrs(port);
return 0;
@@ -1485,18 +1592,6 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
return 0;
}
-/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
- * it is called when the usb device is disconnected
- *
- * usbserial:usb_serial_disconnect
- * calls __serial_close for each open of the port
- * shutdown is called then (ie ftdi_shutdown)
- */
-static void ftdi_shutdown(struct usb_serial *serial)
-{
- dbg("%s", __func__);
-}
-
static void ftdi_sio_priv_release(struct kref *k)
{
struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
@@ -1671,8 +1766,8 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
if (data_offset > 0) {
/* Original sio needs control bytes too... */
transfer_size += (data_offset *
- ((count + (PKTSZ - 1 - data_offset)) /
- (PKTSZ - data_offset)));
+ ((count + (priv->max_packet_size - 1 - data_offset)) /
+ (priv->max_packet_size - data_offset)));
}
buffer = kmalloc(transfer_size, GFP_ATOMIC);
@@ -1694,7 +1789,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
if (data_offset > 0) {
/* Original sio requires control byte at start of
each packet. */
- int user_pktsz = PKTSZ - data_offset;
+ int user_pktsz = priv->max_packet_size - data_offset;
int todo = count;
unsigned char *first_byte = buffer;
const unsigned char *current_position = buf;
@@ -1775,11 +1870,6 @@ static void ftdi_write_bulk_callback(struct urb *urb)
dbg("%s - port %d", __func__, port->number);
- if (status) {
- dbg("nonzero write bulk status received: %d", status);
- return;
- }
-
priv = usb_get_serial_port_data(port);
if (!priv) {
dbg("%s - bad port private data pointer - exiting", __func__);
@@ -1790,13 +1880,18 @@ static void ftdi_write_bulk_callback(struct urb *urb)
data_offset = priv->write_offset;
if (data_offset > 0) {
/* Subtract the control bytes */
- countback -= (data_offset * DIV_ROUND_UP(countback, PKTSZ));
+ countback -= (data_offset * DIV_ROUND_UP(countback, priv->max_packet_size));
}
spin_lock_irqsave(&priv->tx_lock, flags);
--priv->tx_outstanding_urbs;
priv->tx_outstanding_bytes -= countback;
spin_unlock_irqrestore(&priv->tx_lock, flags);
+ if (status) {
+ dbg("nonzero write bulk status received: %d", status);
+ return;
+ }
+
usb_serial_port_softint(port);
} /* ftdi_write_bulk_callback */
@@ -1892,7 +1987,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
/* count data bytes, but not status bytes */
countread = urb->actual_length;
- countread -= 2 * DIV_ROUND_UP(countread, PKTSZ);
+ countread -= 2 * DIV_ROUND_UP(countread, priv->max_packet_size);
spin_lock_irqsave(&priv->rx_lock, flags);
priv->rx_bytes += countread;
spin_unlock_irqrestore(&priv->rx_lock, flags);
@@ -1965,7 +2060,7 @@ static void ftdi_process_read(struct work_struct *work)
need_flip = 0;
for (packet_offset = priv->rx_processed;
- packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+ packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) {
int length;
/* Compare new line status to the old one, signal if different/
@@ -1980,7 +2075,7 @@ static void ftdi_process_read(struct work_struct *work)
priv->prev_status = new_status;
}
- length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2;
+ length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2;
if (length < 0) {
dev_err(&port->dev, "%s - bad packet length: %d\n",
__func__, length+2);
@@ -2011,6 +2106,7 @@ static void ftdi_process_read(struct work_struct *work)
if (data[packet_offset+1] & FTDI_RS_BI) {
error_flag = TTY_BREAK;
dbg("BREAK received");
+ usb_serial_handle_break(port);
}
if (data[packet_offset+1] & FTDI_RS_PE) {
error_flag = TTY_PARITY;
@@ -2025,8 +2121,11 @@ static void ftdi_process_read(struct work_struct *work)
/* Note that the error flag is duplicated for
every character received since we don't know
which character it applied to */
- tty_insert_flip_char(tty,
- data[packet_offset + i], error_flag);
+ if (!usb_serial_handle_sysrq_char(port,
+ data[packet_offset + i]))
+ tty_insert_flip_char(tty,
+ data[packet_offset + i],
+ error_flag);
}
need_flip = 1;
}
@@ -2332,6 +2431,8 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
case FT232BM:
case FT2232C:
case FT232RL:
+ case FT2232H:
+ case FT4232H:
/* the 8U232AM returns a two byte value (the sio is a 1 byte
value) - in the same format as the data returned from the in
point */