diff options
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
-rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 119 |
1 files changed, 54 insertions, 65 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index da1c6f7f82b..7b1673a4407 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -271,26 +271,58 @@ static int debug; static __u16 vendor = FTDI_VID; static __u16 product; +struct ftdi_private { + ftdi_chip_type_t chip_type; + /* type of the device, either SIO or FT8U232AM */ + int baud_base; /* baud base clock for divisor setting */ + int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */ + __u16 last_set_data_urb_value ; + /* the last data state set - needed for doing a break */ + int write_offset; /* This is the offset in the usb data block to write the serial data - + * it is different between devices + */ + int flags; /* some ASYNC_xxxx flags are supported */ + unsigned long last_dtr_rts; /* saved modem control outputs */ + wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ + char prev_status, diff_status; /* Used for TIOCMIWAIT */ + __u8 rx_flags; /* receive state flags (throttling) */ + spinlock_t rx_lock; /* spinlock for receive state */ + struct delayed_work rx_work; + struct usb_serial_port *port; + int rx_processed; + unsigned long rx_bytes; + + __u16 interface; /* FT2232C port interface (0 for FT232/245) */ + + int force_baud; /* if non-zero, force the baud rate to this value */ + int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ + + spinlock_t tx_lock; /* spinlock for transmit state */ + unsigned long tx_bytes; + unsigned long tx_outstanding_bytes; + unsigned long tx_outstanding_urbs; +}; + /* struct ftdi_sio_quirk is used by devices requiring special attention. */ struct ftdi_sio_quirk { int (*probe)(struct usb_serial *); - void (*setup)(struct usb_serial *); /* Special settings during startup. */ + void (*port_probe)(struct ftdi_private *); /* Special settings for probed ports. */ }; static int ftdi_olimex_probe (struct usb_serial *serial); -static void ftdi_USB_UIRT_setup (struct usb_serial *serial); -static void ftdi_HE_TIRA1_setup (struct usb_serial *serial); +static void ftdi_USB_UIRT_setup (struct ftdi_private *priv); +static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv); static struct ftdi_sio_quirk ftdi_olimex_quirk = { .probe = ftdi_olimex_probe, }; static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { - .setup = ftdi_USB_UIRT_setup, + .port_probe = ftdi_USB_UIRT_setup, }; static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { - .setup = ftdi_HE_TIRA1_setup, + .port_probe = ftdi_HE_TIRA1_setup, }; /* @@ -567,38 +599,6 @@ static const char *ftdi_chip_name[] = { #define THROTTLED 0x01 #define ACTUALLY_THROTTLED 0x02 -struct ftdi_private { - ftdi_chip_type_t chip_type; - /* type of the device, either SIO or FT8U232AM */ - int baud_base; /* baud base clock for divisor setting */ - int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */ - __u16 last_set_data_urb_value ; - /* the last data state set - needed for doing a break */ - int write_offset; /* This is the offset in the usb data block to write the serial data - - * it is different between devices - */ - int flags; /* some ASYNC_xxxx flags are supported */ - unsigned long last_dtr_rts; /* saved modem control outputs */ - wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ - char prev_status, diff_status; /* Used for TIOCMIWAIT */ - __u8 rx_flags; /* receive state flags (throttling) */ - spinlock_t rx_lock; /* spinlock for receive state */ - struct delayed_work rx_work; - struct usb_serial_port *port; - int rx_processed; - unsigned long rx_bytes; - - __u16 interface; /* FT2232C port interface (0 for FT232/245) */ - - int force_baud; /* if non-zero, force the baud rate to this value */ - int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ - - spinlock_t tx_lock; /* spinlock for transmit state */ - unsigned long tx_bytes; - unsigned long tx_outstanding_bytes; - unsigned long tx_outstanding_urbs; -}; - /* Used for TIOCMIWAIT */ #define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD) #define FTDI_STATUS_B1_MASK (FTDI_RS_BI) @@ -609,7 +609,6 @@ struct ftdi_private { /* function prototypes for a FTDI serial converter */ static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id); -static int ftdi_sio_attach (struct usb_serial *serial); static void ftdi_shutdown (struct usb_serial *serial); static int ftdi_sio_port_probe (struct usb_serial_port *port); static int ftdi_sio_port_remove (struct usb_serial_port *port); @@ -663,7 +662,6 @@ static struct usb_serial_driver ftdi_sio_device = { .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, - .attach = ftdi_sio_attach, .shutdown = ftdi_shutdown, }; @@ -1149,7 +1147,9 @@ static int create_sysfs_attrs(struct usb_serial_port *port) dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]); retval = device_create_file(&port->dev, &dev_attr_event_char); if ((!retval) && - (priv->chip_type == FT232BM || priv->chip_type == FT2232C)) { + (priv->chip_type == FT232BM || + priv->chip_type == FT2232C || + priv->chip_type == FT232RL)) { retval = device_create_file(&port->dev, &dev_attr_latency_timer); } @@ -1198,6 +1198,8 @@ static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id static int ftdi_sio_port_probe(struct usb_serial_port *port) { struct ftdi_private *priv; + struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); + dbg("%s",__FUNCTION__); @@ -1214,6 +1216,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) than queue a task to deliver them */ priv->flags = ASYNC_LOW_LATENCY; + if (quirk && quirk->port_probe) + quirk->port_probe(priv); + /* Increase the size of read buffers */ kfree(port->bulk_in_buffer); port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL); @@ -1244,29 +1249,13 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) return 0; } -/* attach subroutine */ -static int ftdi_sio_attach (struct usb_serial *serial) -{ - /* Check for device requiring special set up. */ - struct ftdi_sio_quirk *quirk = usb_get_serial_data(serial); - - if (quirk && quirk->setup) - quirk->setup(serial); - - return 0; -} /* ftdi_sio_attach */ - - /* Setup for the USB-UIRT device, which requires hardwired * baudrate (38400 gets mapped to 312500) */ /* Called from usbserial:serial_probe */ -static void ftdi_USB_UIRT_setup (struct usb_serial *serial) +static void ftdi_USB_UIRT_setup (struct ftdi_private *priv) { - struct ftdi_private *priv; - dbg("%s",__FUNCTION__); - priv = usb_get_serial_port_data(serial->port[0]); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 77; priv->force_baud = B38400; @@ -1274,13 +1263,10 @@ static void ftdi_USB_UIRT_setup (struct usb_serial *serial) /* Setup for the HE-TIRA1 device, which requires hardwired * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */ -static void ftdi_HE_TIRA1_setup (struct usb_serial *serial) +static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv) { - struct ftdi_private *priv; - dbg("%s",__FUNCTION__); - priv = usb_get_serial_port_data(serial->port[0]); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 240; priv->force_baud = B38400; @@ -1574,14 +1560,15 @@ static void ftdi_write_bulk_callback (struct urb *urb) struct ftdi_private *priv; int data_offset; /* will be 1 for the SIO and 0 otherwise */ unsigned long countback; + int status = urb->status; /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree (urb->transfer_buffer); dbg("%s - port %d", __FUNCTION__, port->number); - if (urb->status) { - dbg("nonzero write bulk status received: %d", urb->status); + if (status) { + dbg("nonzero write bulk status received: %d", status); return; } @@ -1657,6 +1644,7 @@ static void ftdi_read_bulk_callback (struct urb *urb) struct ftdi_private *priv; unsigned long countread; unsigned long flags; + int status = urb->status; if (urb->number_of_packets > 0) { err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__, @@ -1685,9 +1673,10 @@ static void ftdi_read_bulk_callback (struct urb *urb) err("%s - Not my urb!", __FUNCTION__); } - if (urb->status) { + if (status) { /* This will happen at close every time so it is a dbg not an err */ - dbg("(this is ok on close) nonzero read bulk status received: %d", urb->status); + dbg("(this is ok on close) nonzero read bulk status received: " + "%d", status); return; } |