diff options
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
-rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 110 |
1 files changed, 67 insertions, 43 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 984f6eff4c4..51d7bdea286 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -578,6 +578,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) }, { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) }, { USB_DEVICE(TTI_VID, TTI_QL355P_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, @@ -654,6 +655,9 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -857,7 +861,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, kfree(buf); if (rv < 0) { - err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s", + dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s", __func__, (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", @@ -1150,7 +1154,7 @@ static void ftdi_determine_type(struct usb_serial_port *port) /* Assume its an FT232R */ priv->chip_type = FT232RL; } - info("Detected %s", ftdi_chip_name[priv->chip_type]); + dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); } @@ -1323,7 +1327,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); if (!priv) { - err("%s- kmalloc(%Zd) failed.", __func__, + dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, sizeof(struct ftdi_private)); return -ENOMEM; } @@ -1406,7 +1410,8 @@ static int ftdi_jtag_probe(struct usb_serial *serial) dbg("%s", __func__); if (interface == udev->actconfig->interface[0]) { - info("Ignoring serial port reserved for JTAG"); + dev_info(&udev->dev, + "Ignoring serial port reserved for JTAG\n"); return -ENODEV; } @@ -1424,7 +1429,8 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial) if (ep->enabled && ep_desc->wMaxPacketSize == 0) { ep_desc->wMaxPacketSize = cpu_to_le16(0x40); - info("Fixing invalid wMaxPacketSize on read pipe"); + dev_info(&serial->dev->dev, + "Fixing invalid wMaxPacketSize on read pipe\n"); } return 0; @@ -1518,8 +1524,9 @@ static int ftdi_open(struct tty_struct *tty, ftdi_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - err("%s - failed submitting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); return result; @@ -1553,7 +1560,7 @@ static void ftdi_close(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("error from flowcontrol urb"); + dev_err(&port->dev, "error from flowcontrol urb\n"); } /* drop RTS and DTR */ @@ -1618,14 +1625,15 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, buffer = kmalloc(transfer_size, GFP_ATOMIC); if (!buffer) { - err("%s ran out of kernel memory for urb ...", __func__); + dev_err(&port->dev, + "%s ran out of kernel memory for urb ...\n", __func__); count = -ENOMEM; goto error_no_buffer; } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { - err("%s - no more free urbs", __func__); + dev_err(&port->dev, "%s - no more free urbs\n", __func__); count = -ENOMEM; goto error_no_urb; } @@ -1669,8 +1677,9 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - err("%s - failed submitting write urb, error %d", - __func__, status); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, status); count = status; goto error; } else { @@ -1777,7 +1786,8 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty) buffered = (int)priv->tx_outstanding_bytes; spin_unlock_irqrestore(&priv->tx_lock, flags); if (buffered < 0) { - err("%s outstanding tx bytes is negative!", __func__); + dev_err(&port->dev, "%s outstanding tx bytes is negative!\n", + __func__); buffered = 0; } return buffered; @@ -1793,11 +1803,12 @@ static void ftdi_read_bulk_callback(struct urb *urb) int status = urb->status; if (urb->number_of_packets > 0) { - err("%s transfer_buffer_length %d actual_length %d number of packets %d", - __func__, - urb->transfer_buffer_length, - urb->actual_length, urb->number_of_packets); - err("%s transfer_flags %x ", __func__, urb->transfer_flags); + dev_err(&port->dev, "%s transfer_buffer_length %d " + "actual_length %d number of packets %d\n", __func__, + urb->transfer_buffer_length, + urb->actual_length, urb->number_of_packets); + dev_err(&port->dev, "%s transfer_flags %x\n", __func__, + urb->transfer_flags); } dbg("%s - port %d", __func__, port->number); @@ -1805,7 +1816,7 @@ static void ftdi_read_bulk_callback(struct urb *urb) if (port->port.count <= 0) return; - tty = port->port.tty; + tty = tty_port_tty_get(&port->port); if (!tty) { dbg("%s - bad tty pointer - exiting", __func__); return; @@ -1814,17 +1825,17 @@ static void ftdi_read_bulk_callback(struct urb *urb) priv = usb_get_serial_port_data(port); if (!priv) { dbg("%s - bad port private data pointer - exiting", __func__); - return; + goto out; } if (urb != port->read_urb) - err("%s - Not my urb!", __func__); + dev_err(&port->dev, "%s - Not my urb!\n", __func__); if (status) { /* This will happen at close every time so it is a dbg not an err */ dbg("(this is ok on close) nonzero read bulk status received: %d", status); - return; + goto out; } /* count data bytes, but not status bytes */ @@ -1835,7 +1846,8 @@ static void ftdi_read_bulk_callback(struct urb *urb) spin_unlock_irqrestore(&priv->rx_lock, flags); ftdi_process_read(&priv->rx_work.work); - +out: + tty_kref_put(tty); } /* ftdi_read_bulk_callback */ @@ -1860,7 +1872,7 @@ static void ftdi_process_read(struct work_struct *work) if (port->port.count <= 0) return; - tty = port->port.tty; + tty = tty_port_tty_get(&port->port); if (!tty) { dbg("%s - bad tty pointer - exiting", __func__); return; @@ -1869,13 +1881,13 @@ static void ftdi_process_read(struct work_struct *work) priv = usb_get_serial_port_data(port); if (!priv) { dbg("%s - bad port private data pointer - exiting", __func__); - return; + goto out; } urb = port->read_urb; if (!urb) { dbg("%s - bad read_urb pointer - exiting", __func__); - return; + goto out; } data = urb->transfer_buffer; @@ -1920,7 +1932,8 @@ static void ftdi_process_read(struct work_struct *work) length = min(PKTSZ, urb->actual_length-packet_offset)-2; if (length < 0) { - err("%s - bad packet length: %d", __func__, length+2); + dev_err(&port->dev, "%s - bad packet length: %d\n", + __func__, length+2); length = 0; } @@ -2017,7 +2030,7 @@ static void ftdi_process_read(struct work_struct *work) schedule_delayed_work(&priv->rx_work, 1); else dbg("%s - port is closed", __func__); - return; + goto out; } /* urb is completely processed */ @@ -2035,9 +2048,12 @@ static void ftdi_process_read(struct work_struct *work) result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); } +out: + tty_kref_put(tty); } /* ftdi_process_read */ @@ -2063,8 +2079,8 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("%s FAILED to enable/disable break state (state was %d)", - __func__, break_state); + dev_err(&port->dev, "%s FAILED to enable/disable break state " + "(state was %d)\n", __func__, break_state); } dbg("%s break state is %d - urb is %d", __func__, @@ -2136,7 +2152,7 @@ static void ftdi_set_termios(struct tty_struct *tty, case CS7: urb_value |= 7; dbg("Setting CS7"); break; case CS8: urb_value |= 8; dbg("Setting CS8"); break; default: - err("CSIZE was set but not CS5-CS8"); + dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n"); } } @@ -2149,7 +2165,8 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_SHORT_TIMEOUT) < 0) { - err("%s FAILED to set databits/stopbits/parity", __func__); + dev_err(&port->dev, "%s FAILED to set " + "databits/stopbits/parity\n", __func__); } /* Now do the baudrate */ @@ -2160,14 +2177,17 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("%s error from disable flowcontrol urb", __func__); + dev_err(&port->dev, + "%s error from disable flowcontrol urb\n", + __func__); } /* Drop RTS and DTR */ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } else { /* set the baudrate determined before */ if (change_speed(tty, port)) - err("%s urb failed to set baudrate", __func__); + dev_err(&port->dev, "%s urb failed to set baudrate\n", + __func__); /* Ensure RTS and DTR are raised when baudrate changed from 0 */ if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) set_mctrl(port, TIOCM_DTR | TIOCM_RTS); @@ -2183,7 +2203,8 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), buf, 0, WDR_TIMEOUT) < 0) { - err("urb failed to set to rts/cts flow control"); + dev_err(&port->dev, + "urb failed to set to rts/cts flow control\n"); } } else { @@ -2214,7 +2235,8 @@ static void ftdi_set_termios(struct tty_struct *tty, urb_value , (FTDI_SIO_XON_XOFF_HS | priv->interface), buf, 0, WDR_TIMEOUT) < 0) { - err("urb failed to set to xon/xoff flow control"); + dev_err(&port->dev, "urb failed to set to " + "xon/xoff flow control\n"); } } else { /* else clause to only run if cflag ! CRTSCTS and iflag @@ -2227,7 +2249,8 @@ static void ftdi_set_termios(struct tty_struct *tty, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { - err("urb failed to clear flow control"); + dev_err(&port->dev, + "urb failed to clear flow control\n"); } } @@ -2253,7 +2276,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) 0, 0, buf, 1, WDR_TIMEOUT); if (ret < 0) { - err("%s Could not get modem status of device - err: %d", __func__, + dbg("%s Could not get modem status of device - err: %d", __func__, ret); return ret; } @@ -2272,7 +2295,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) 0, priv->interface, buf, 2, WDR_TIMEOUT); if (ret < 0) { - err("%s Could not get modem status of device - err: %d", __func__, + dbg("%s Could not get modem status of device - err: %d", __func__, ret); return ret; } @@ -2419,7 +2442,8 @@ static int __init ftdi_init(void) if (retval) goto failed_usb_register; - info(DRIVER_VERSION ":" DRIVER_DESC); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); return 0; failed_usb_register: usb_serial_deregister(&ftdi_sio_device); @@ -2452,5 +2476,5 @@ module_param(vendor, ushort, 0); MODULE_PARM_DESC(vendor, "User specified vendor ID (default=" __MODULE_STRING(FTDI_VID)")"); module_param(product, ushort, 0); -MODULE_PARM_DESC(vendor, "User specified product ID"); +MODULE_PARM_DESC(product, "User specified product ID"); |