diff options
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 397 |
1 files changed, 296 insertions, 101 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d9fcdaedf38..b574878c78b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -33,6 +33,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> +#include <linux/smp_lock.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> @@ -47,7 +48,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.4.3" +#define DRIVER_VERSION "v1.5.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>" #define DRIVER_DESC "USB FTDI Serial Converters Driver" @@ -82,17 +83,20 @@ struct ftdi_private { int rx_processed; unsigned long rx_bytes; - __u16 interface; /* FT2232C port interface (0 for FT232/245) */ + __u16 interface; /* FT2232C, FT2232H or FT4232H port interface + (0 for FT232/245) */ speed_t force_baud; /* if non-zero, force the baud rate to this value */ int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ + unsigned int latency; /* latency setting in use */ spinlock_t tx_lock; /* spinlock for transmit state */ unsigned long tx_bytes; unsigned long tx_outstanding_bytes; unsigned long tx_outstanding_urbs; + unsigned short max_packet_size; }; /* struct ftdi_sio_quirk is used by devices requiring special attention. */ @@ -104,6 +108,7 @@ struct ftdi_sio_quirk { static int ftdi_jtag_probe(struct usb_serial *serial); static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); +static int ftdi_NDI_device_setup(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); @@ -115,6 +120,10 @@ static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = { .probe = ftdi_mtxorb_hack_setup, }; +static struct ftdi_sio_quirk ftdi_NDI_device_quirk = { + .probe = ftdi_NDI_device_setup, +}; + static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { .port_probe = ftdi_USB_UIRT_setup, }; @@ -163,6 +172,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, @@ -187,6 +197,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) }, @@ -575,6 +586,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) }, { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) }, { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, @@ -640,6 +654,16 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) }, { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, @@ -656,6 +680,8 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, @@ -663,7 +689,6 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) }, { USB_DEVICE(ATMEL_VID, STK541_PID) }, { USB_DEVICE(DE_VID, STB_PID) }, { USB_DEVICE(DE_VID, WHT_PID) }, @@ -672,6 +697,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, + { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -692,12 +719,13 @@ static const char *ftdi_chip_name[] = { [FT232BM] = "FT232BM", [FT2232C] = "FT2232C", [FT232RL] = "FT232RL", + [FT2232H] = "FT2232H", + [FT4232H] = "FT4232H" }; /* Constants for read urb and write urb */ #define BUFSZ 512 -#define PKTSZ 64 /* rx_flags */ #define THROTTLED 0x01 @@ -714,13 +742,12 @@ static const char *ftdi_chip_name[] = { /* function prototypes for a FTDI serial converter */ static int ftdi_sio_probe(struct usb_serial *serial, const struct usb_device_id *id); -static void ftdi_shutdown(struct usb_serial *serial); static int ftdi_sio_port_probe(struct usb_serial_port *port); static int ftdi_sio_port_remove(struct usb_serial_port *port); static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void ftdi_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void ftdi_close(struct usb_serial_port *port); +static void ftdi_dtr_rts(struct usb_serial_port *port, int on); static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int ftdi_write_room(struct tty_struct *tty); @@ -743,6 +770,8 @@ static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); static unsigned short int ftdi_232am_baud_to_divisor(int baud); static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); static __u32 ftdi_232bm_baud_to_divisor(int baud); +static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); +static __u32 ftdi_2232h_baud_to_divisor(int baud); static struct usb_serial_driver ftdi_sio_device = { .driver = { @@ -758,6 +787,7 @@ static struct usb_serial_driver ftdi_sio_device = { .port_remove = ftdi_sio_port_remove, .open = ftdi_open, .close = ftdi_close, + .dtr_rts = ftdi_dtr_rts, .throttle = ftdi_throttle, .unthrottle = ftdi_unthrottle, .write = ftdi_write, @@ -770,7 +800,6 @@ static struct usb_serial_driver ftdi_sio_device = { .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, - .shutdown = ftdi_shutdown, }; @@ -836,6 +865,36 @@ static __u32 ftdi_232bm_baud_to_divisor(int baud) return ftdi_232bm_baud_base_to_divisor(baud, 48000000); } +static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) +{ + static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; + __u32 divisor; + int divisor3; + + /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ + divisor3 = (base / 10 / baud) * 8; + + divisor = divisor3 >> 3; + divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; + /* Deal with special cases for highest baud rates. */ + if (divisor == 1) + divisor = 0; + else if (divisor == 0x4001) + divisor = 1; + /* + * Set this bit to turn off a divide by 2.5 on baud rate generator + * This enables baud rates up to 12Mbaud but cannot reach below 1200 + * baud with this bit set + */ + divisor |= 0x00020000; + return divisor; +} + +static __u32 ftdi_2232h_baud_to_divisor(int baud) +{ + return ftdi_2232h_baud_base_to_divisor(baud, 120000000); +} + #define set_mctrl(port, set) update_mctrl((port), (set), 0) #define clear_mctrl(port, clear) update_mctrl((port), 0, (clear)) @@ -986,6 +1045,29 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, case FT2232C: /* FT2232C chip */ case FT232RL: if (baud <= 3000000) { + __u16 product_id = le16_to_cpu( + port->serial->dev->descriptor.idProduct); + if (((FTDI_NDI_HUC_PID == product_id) || + (FTDI_NDI_SPECTRA_SCU_PID == product_id) || + (FTDI_NDI_FUTURE_2_PID == product_id) || + (FTDI_NDI_FUTURE_3_PID == product_id) || + (FTDI_NDI_AURORA_SCU_PID == product_id)) && + (baud == 19200)) { + baud = 1200000; + } + div_value = ftdi_232bm_baud_to_divisor(baud); + } else { + dbg("%s - Baud rate too high!", __func__); + div_value = ftdi_232bm_baud_to_divisor(9600); + div_okay = 0; + baud = 9600; + } + break; + case FT2232H: /* FT2232H chip */ + case FT4232H: /* FT4232H chip */ + if ((baud <= 12000000) & (baud >= 1200)) { + div_value = ftdi_2232h_baud_to_divisor(baud); + } else if (baud < 1200) { div_value = ftdi_232bm_baud_to_divisor(baud); } else { dbg("%s - Baud rate too high!", __func__); @@ -1037,7 +1119,54 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) return rv; } +static int write_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + char buf[1]; + int rv = 0; + int l = priv->latency; + + if (priv->flags & ASYNC_LOW_LATENCY) + l = 1; + + dbg("%s: setting latency timer = %i", __func__, l); + + rv = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + l, priv->interface, + buf, 0, WDR_TIMEOUT); + + if (rv < 0) + dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); + return rv; +} + +static int read_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + unsigned short latency = 0; + int rv = 0; + + + dbg("%s", __func__); + rv = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + FTDI_SIO_GET_LATENCY_TIMER_REQUEST, + FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, + 0, priv->interface, + (char *) &latency, 1, WDR_TIMEOUT); + + if (rv < 0) { + dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); + return -EIO; + } + return latency; +} static int get_serial_info(struct usb_serial_port *port, struct serial_struct __user *retinfo) @@ -1097,6 +1226,7 @@ static int set_serial_info(struct tty_struct *tty, priv->custom_divisor = new_serial.custom_divisor; tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + write_latency_timer(port); check_and_exit: if ((old_priv.flags & ASYNC_SPD_MASK) != @@ -1146,14 +1276,29 @@ static void ftdi_determine_type(struct usb_serial_port *port) if (interfaces > 1) { int inter; - /* Multiple interfaces. Assume FT2232C. */ - priv->chip_type = FT2232C; + /* Multiple interfaces.*/ + if (version == 0x0800) { + priv->chip_type = FT4232H; + /* Hi-speed - baud clock runs at 120MHz */ + priv->baud_base = 120000000 / 2; + } else if (version == 0x0700) { + priv->chip_type = FT2232H; + /* Hi-speed - baud clock runs at 120MHz */ + priv->baud_base = 120000000 / 2; + } else + priv->chip_type = FT2232C; + /* Determine interface code. */ inter = serial->interface->altsetting->desc.bInterfaceNumber; - if (inter == 0) - priv->interface = PIT_SIOA; - else - priv->interface = PIT_SIOB; + if (inter == 0) { + priv->interface = INTERFACE_A; + } else if (inter == 1) { + priv->interface = INTERFACE_B; + } else if (inter == 2) { + priv->interface = INTERFACE_C; + } else if (inter == 3) { + priv->interface = INTERFACE_D; + } /* BM-type devices have a bug where bcdDevice gets set * to 0x200 when iSerialNumber is 0. */ if (version < 0x500) { @@ -1181,6 +1326,45 @@ static void ftdi_determine_type(struct usb_serial_port *port) } +/* Determine the maximum packet size for the device. This depends on the chip + * type and the USB host capabilities. The value should be obtained from the + * device descriptor as the chip will use the appropriate values for the host.*/ +static void ftdi_set_max_packet_size(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + struct usb_device *udev = serial->dev; + + struct usb_interface *interface = serial->interface; + struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc; + + unsigned num_endpoints; + int i = 0; + + num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; + dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints); + + /* NOTE: some customers have programmed FT232R/FT245R devices + * with an endpoint size of 0 - not good. In this case, we + * want to override the endpoint descriptor setting and use a + * value of 64 for wMaxPacketSize */ + for (i = 0; i < num_endpoints; i++) { + dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1, + interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize); + ep_desc = &interface->cur_altsetting->endpoint[i].desc; + if (ep_desc->wMaxPacketSize == 0) { + ep_desc->wMaxPacketSize = cpu_to_le16(0x40); + dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i); + } + } + + /* set max packet size based on descriptor */ + priv->max_packet_size = ep_desc->wMaxPacketSize; + + dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size); +} + + /* * *************************************************************************** * Sysfs Attribute @@ -1192,27 +1376,13 @@ static ssize_t show_latency_timer(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - struct usb_device *udev = port->serial->dev; - unsigned short latency = 0; - int rv = 0; - - - dbg("%s", __func__); - - rv = usb_control_msg(udev, - usb_rcvctrlpipe(udev, 0), - FTDI_SIO_GET_LATENCY_TIMER_REQUEST, - FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, - 0, priv->interface, - (char *) &latency, 1, WDR_TIMEOUT); - - if (rv < 0) { - dev_err(dev, "Unable to read latency timer: %i\n", rv); - return -EIO; - } - return sprintf(buf, "%i\n", latency); + if (priv->flags & ASYNC_LOW_LATENCY) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "%i\n", priv->latency); } + /* Write a new value of the latency timer, in units of milliseconds. */ static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf, @@ -1220,25 +1390,13 @@ static ssize_t store_latency_timer(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - struct usb_device *udev = port->serial->dev; - char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - dbg("%s: setting latency timer = %i", __func__, v); - - rv = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - FTDI_SIO_SET_LATENCY_TIMER_REQUEST, - FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - v, priv->interface, - buf, 0, WDR_TIMEOUT); - - if (rv < 0) { - dev_err(dev, "Unable to write latency timer: %i\n", rv); + priv->latency = v; + rv = write_latency_timer(port); + if (rv < 0) return -EIO; - } - return count; } @@ -1290,7 +1448,9 @@ static int create_sysfs_attrs(struct usb_serial_port *port) if ((!retval) && (priv->chip_type == FT232BM || priv->chip_type == FT2232C || - priv->chip_type == FT232RL)) { + priv->chip_type == FT232RL || + priv->chip_type == FT2232H || + priv->chip_type == FT4232H)) { retval = device_create_file(&port->dev, &dev_attr_latency_timer); } @@ -1309,7 +1469,9 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) device_remove_file(&port->dev, &dev_attr_event_char); if (priv->chip_type == FT232BM || priv->chip_type == FT2232C || - priv->chip_type == FT232RL) { + priv->chip_type == FT232RL || + priv->chip_type == FT2232H || + priv->chip_type == FT4232H) { device_remove_file(&port->dev, &dev_attr_latency_timer); } } @@ -1392,6 +1554,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); ftdi_determine_type(port); + ftdi_set_max_packet_size(port); + read_latency_timer(port); create_sysfs_attrs(port); return 0; } @@ -1422,6 +1586,39 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) } /* ftdi_HE_TIRA1_setup */ /* + * Module parameter to control latency timer for NDI FTDI-based USB devices. + * If this value is not set in modprobe.conf.local its value will be set to 1ms. + */ +static int ndi_latency_timer = 1; + +/* Setup for the NDI FTDI-based USB devices, which requires hardwired + * baudrate (19200 gets mapped to 1200000). + * + * Called from usbserial:serial_probe. + */ +static int ftdi_NDI_device_setup(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + int latency = ndi_latency_timer; + int rv = 0; + char buf[1]; + + if (latency == 0) + latency = 1; + if (latency > 99) + latency = 99; + + dbg("%s setting NDI device latency to %d", __func__, latency); + dev_info(&udev->dev, "NDI device with a latency value of %d", latency); + + rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + latency, 0, buf, 0, WDR_TIMEOUT); + return 0; +} + +/* * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from * userspace using openocd. @@ -1460,18 +1657,6 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial) return 0; } -/* ftdi_shutdown is called from usbserial:usb_serial_disconnect - * it is called when the usb device is disconnected - * - * usbserial:usb_serial_disconnect - * calls __serial_close for each open of the port - * shutdown is called then (ie ftdi_shutdown) - */ -static void ftdi_shutdown(struct usb_serial *serial) -{ - dbg("%s", __func__); -} - static void ftdi_sio_priv_release(struct kref *k) { struct ftdi_private *priv = container_of(k, struct ftdi_private, kref); @@ -1514,6 +1699,8 @@ static int ftdi_open(struct tty_struct *tty, if (tty) tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + write_latency_timer(port); + /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -1529,11 +1716,6 @@ static int ftdi_open(struct tty_struct *tty, if (tty) ftdi_set_termios(tty, port, tty->termios); - /* FIXME: Flow control might be enabled, so it should be checked - - we have no control of defaults! */ - /* Turn on RTS and DTR since we are not flow controlling by default */ - set_mctrl(port, TIOCM_DTR | TIOCM_RTS); - /* Not throttled */ spin_lock_irqsave(&priv->rx_lock, flags); priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); @@ -1558,6 +1740,30 @@ static int ftdi_open(struct tty_struct *tty, } /* ftdi_open */ +static void ftdi_dtr_rts(struct usb_serial_port *port, int on) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + char buf[1]; + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* Disable flow control */ + if (!on && usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, buf, 0, + WDR_TIMEOUT) < 0) { + dev_err(&port->dev, "error from flowcontrol urb\n"); + } + /* drop RTS and DTR */ + if (on) + set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } + mutex_unlock(&port->serial->disc_mutex); +} /* * usbserial:__serial_close only calls ftdi_close if the point is open @@ -1567,31 +1773,12 @@ static int ftdi_open(struct tty_struct *tty, * */ -static void ftdi_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ftdi_close(struct usb_serial_port *port) { /* ftdi_close */ - unsigned int c_cflag = tty->termios->c_cflag; struct ftdi_private *priv = usb_get_serial_port_data(port); - char buf[1]; dbg("%s", __func__); - mutex_lock(&port->serial->disc_mutex); - if (c_cflag & HUPCL && !port->serial->disconnected) { - /* Disable flow control */ - if (usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, buf, 0, - WDR_TIMEOUT) < 0) { - dev_err(&port->dev, "error from flowcontrol urb\n"); - } - - /* drop RTS and DTR */ - clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); - } /* Note change no line if hupcl is off */ - mutex_unlock(&port->serial->disc_mutex); /* cancel any scheduled reading */ cancel_delayed_work_sync(&priv->rx_work); @@ -1644,8 +1831,8 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, if (data_offset > 0) { /* Original sio needs control bytes too... */ transfer_size += (data_offset * - ((count + (PKTSZ - 1 - data_offset)) / - (PKTSZ - data_offset))); + ((count + (priv->max_packet_size - 1 - data_offset)) / + (priv->max_packet_size - data_offset))); } buffer = kmalloc(transfer_size, GFP_ATOMIC); @@ -1667,7 +1854,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, if (data_offset > 0) { /* Original sio requires control byte at start of each packet. */ - int user_pktsz = PKTSZ - data_offset; + int user_pktsz = priv->max_packet_size - data_offset; int todo = count; unsigned char *first_byte = buffer; const unsigned char *current_position = buf; @@ -1748,11 +1935,6 @@ static void ftdi_write_bulk_callback(struct urb *urb) dbg("%s - port %d", __func__, port->number); - if (status) { - dbg("nonzero write bulk status received: %d", status); - return; - } - priv = usb_get_serial_port_data(port); if (!priv) { dbg("%s - bad port private data pointer - exiting", __func__); @@ -1763,13 +1945,18 @@ static void ftdi_write_bulk_callback(struct urb *urb) data_offset = priv->write_offset; if (data_offset > 0) { /* Subtract the control bytes */ - countback -= (data_offset * DIV_ROUND_UP(countback, PKTSZ)); + countback -= (data_offset * DIV_ROUND_UP(countback, priv->max_packet_size)); } spin_lock_irqsave(&priv->tx_lock, flags); --priv->tx_outstanding_urbs; priv->tx_outstanding_bytes -= countback; spin_unlock_irqrestore(&priv->tx_lock, flags); + if (status) { + dbg("nonzero write bulk status received: %d", status); + return; + } + usb_serial_port_softint(port); } /* ftdi_write_bulk_callback */ @@ -1865,7 +2052,7 @@ static void ftdi_read_bulk_callback(struct urb *urb) /* count data bytes, but not status bytes */ countread = urb->actual_length; - countread -= 2 * DIV_ROUND_UP(countread, PKTSZ); + countread -= 2 * DIV_ROUND_UP(countread, priv->max_packet_size); spin_lock_irqsave(&priv->rx_lock, flags); priv->rx_bytes += countread; spin_unlock_irqrestore(&priv->rx_lock, flags); @@ -1938,7 +2125,7 @@ static void ftdi_process_read(struct work_struct *work) need_flip = 0; for (packet_offset = priv->rx_processed; - packet_offset < urb->actual_length; packet_offset += PKTSZ) { + packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) { int length; /* Compare new line status to the old one, signal if different/ @@ -1953,7 +2140,7 @@ static void ftdi_process_read(struct work_struct *work) priv->prev_status = new_status; } - length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2; + length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2; if (length < 0) { dev_err(&port->dev, "%s - bad packet length: %d\n", __func__, length+2); @@ -1984,6 +2171,7 @@ static void ftdi_process_read(struct work_struct *work) if (data[packet_offset+1] & FTDI_RS_BI) { error_flag = TTY_BREAK; dbg("BREAK received"); + usb_serial_handle_break(port); } if (data[packet_offset+1] & FTDI_RS_PE) { error_flag = TTY_PARITY; @@ -1998,8 +2186,11 @@ static void ftdi_process_read(struct work_struct *work) /* Note that the error flag is duplicated for every character received since we don't know which character it applied to */ - tty_insert_flip_char(tty, - data[packet_offset + i], error_flag); + if (!usb_serial_handle_sysrq_char(tty, port, + data[packet_offset + i])) + tty_insert_flip_char(tty, + data[packet_offset + i], + error_flag); } need_flip = 1; } @@ -2305,6 +2496,8 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) case FT232BM: case FT2232C: case FT232RL: + case FT2232H: + case FT4232H: /* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same format as the data returned from the in point */ @@ -2494,3 +2687,5 @@ MODULE_PARM_DESC(vendor, "User specified vendor ID (default=" module_param(product, ushort, 0); MODULE_PARM_DESC(product, "User specified product ID"); +module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override"); |