diff options
Diffstat (limited to 'drivers/usb/serial/ipw.c')
-rw-r--r-- | drivers/usb/serial/ipw.c | 48 |
1 files changed, 24 insertions, 24 deletions
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index ec0ccd14e18..bc85ca5c1c3 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -169,15 +169,15 @@ static void ipw_read_bulk_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (status) { dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); + __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); tty = port->tty; if (tty && urb->actual_length) { @@ -195,7 +195,7 @@ static void ipw_read_bulk_callback(struct urb *urb) ipw_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); return; } @@ -206,7 +206,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) u8 *buf_flow_init; int result; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); if (!buf_flow_init) @@ -217,7 +217,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) /* --1: Tell the modem to initialize (we think) From sniffs this is always the * first thing that gets sent to the modem during opening of the device */ - dbg("%s: Sending SIO_INIT (we guess)",__FUNCTION__); + dbg("%s: Sending SIO_INIT (we guess)",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev,0), IPW_SIO_INIT, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -234,7 +234,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); /*--2: Start reading from the device */ - dbg("%s: setting up bulk read callback",__FUNCTION__); + dbg("%s: setting up bulk read callback",__func__); usb_fill_bulk_urb(port->read_urb, dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), port->bulk_in_buffer, @@ -242,10 +242,10 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) ipw_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result < 0) - dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result); + dbg("%s - usb_submit_urb(read bulk) failed with status %d", __func__, result); /*--3: Tell the modem to open the floodgates on the rx bulk channel */ - dbg("%s:asking modem for RxRead (RXBULK_ON)",__FUNCTION__); + dbg("%s:asking modem for RxRead (RXBULK_ON)",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_RXCTL, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -258,7 +258,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result); /*--4: setup the initial flowcontrol */ - dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init); + dbg("%s:setting init flowcontrol (%s)",__func__,buf_flow_init); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_HANDFLOW, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -272,7 +272,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) /*--5: raise the dtr */ - dbg("%s:raising dtr",__FUNCTION__); + dbg("%s:raising dtr",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -285,7 +285,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) dev_err(&port->dev, "setting dtr failed (error = %d)\n", result); /*--6: raise the rts */ - dbg("%s:raising rts",__FUNCTION__); + dbg("%s:raising rts",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -307,12 +307,12 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp) int result; if (tty_hung_up_p(filp)) { - dbg("%s: tty_hung_up_p ...", __FUNCTION__); + dbg("%s: tty_hung_up_p ...", __func__); return; } /*--1: drop the dtr */ - dbg("%s:dropping dtr",__FUNCTION__); + dbg("%s:dropping dtr",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, @@ -325,7 +325,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp) dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result); /*--2: drop the rts */ - dbg("%s:dropping rts",__FUNCTION__); + dbg("%s:dropping rts",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, IPW_PIN_CLRRTS, @@ -338,7 +338,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp) /*--3: purge */ - dbg("%s:sending purge",__FUNCTION__); + dbg("%s:sending purge",__func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 0x03, @@ -373,13 +373,13 @@ static void ipw_write_bulk_callback(struct urb *urb) struct usb_serial_port *port = urb->context; int status = urb->status; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); port->write_urb_busy = 0; if (status) dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); + __func__, status); usb_serial_port_softint(port); } @@ -389,18 +389,18 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int struct usb_device *dev = port->serial->dev; int ret; - dbg("%s: TOP: count=%d, in_interrupt=%ld", __FUNCTION__, + dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__, count, in_interrupt() ); if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); + dbg("%s - write request of 0 bytes", __func__); return 0; } spin_lock_bh(&port->lock); if (port->write_urb_busy) { spin_unlock_bh(&port->lock); - dbg("%s - already writing", __FUNCTION__); + dbg("%s - already writing", __func__); return 0; } port->write_urb_busy = 1; @@ -409,7 +409,7 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count = min(count, port->bulk_out_size); memcpy(port->bulk_out_buffer, buf, count); - dbg("%s count now:%d", __FUNCTION__, count); + dbg("%s count now:%d", __func__, count); usb_fill_bulk_urb(port->write_urb, dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress), @@ -421,11 +421,11 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (ret != 0) { port->write_urb_busy = 0; - dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, ret); + dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __func__, ret); return ret; } - dbg("%s returning %d", __FUNCTION__, count); + dbg("%s returning %d", __func__, count); return count; } |