summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/ipw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/ipw.c')
-rw-r--r--drivers/usb/serial/ipw.c294
1 files changed, 153 insertions, 141 deletions
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index bc85ca5c1c3..a842025b9b5 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -10,27 +10,27 @@
* (at your option) any later version.
*
* All information about the device was acquired using SnoopyPro
- * on MSFT's O/S, and examing the MSFT drivers' debug output
+ * on MSFT's O/S, and examing the MSFT drivers' debug output
* (insanely left _on_ in the enduser version)
*
* It was written out of frustration with the IPWireless USB modem
* supplied by Axity3G/Sentech South Africa not supporting
* Linux whatsoever.
*
- * Nobody provided any proprietary information that was not already
+ * Nobody provided any proprietary information that was not already
* available for this device.
- *
- * The modem adheres to the "3GPP TS 27.007 AT command set for 3G
- * User Equipment (UE)" standard, available from
+ *
+ * The modem adheres to the "3GPP TS 27.007 AT command set for 3G
+ * User Equipment (UE)" standard, available from
* http://www.3gpp.org/ftp/Specs/html-info/27007.htm
*
* The code was only tested the IPWireless handheld modem distributed
* in South Africa by Sentech.
- *
+ *
* It may work for Woosh Inc in .nz too, as it appears they use the
* same kit.
*
- * There is still some work to be done in terms of handling
+ * There is still some work to be done in terms of handling
* DCD, DTR, RTS, CTS which are currently faked.
* It's good enough for PPP at this point. It's based off all kinds of
* code found in usb/serial and usb/class
@@ -47,7 +47,7 @@
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
/*
* Version Information
@@ -64,7 +64,7 @@
/* Message sizes */
#define EVENT_BUFFER_SIZE 0xFF
-#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
+#define CHAR2INT16(c1, c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
#define NUM_BULK_URBS 24
#define NUM_CONTROL_URBS 16
@@ -94,33 +94,34 @@ enum {
/* data bits */
#define ipw_dtb_7 0x700
-#define ipw_dtb_8 0x810 // ok so the define is misleading, I know, but forces 8,n,1
- // I mean, is there a point to any other setting these days? :)
+#define ipw_dtb_8 0x810 /* ok so the define is misleading, I know, but forces 8,n,1 */
+ /* I mean, is there a point to any other setting these days? :) */
/* usb control request types : */
-#define IPW_SIO_RXCTL 0x00 // control bulk rx channel transmissions, value=1/0 (on/off)
-#define IPW_SIO_SET_BAUD 0x01 // set baud, value=requested ipw_sio_bxxxx
-#define IPW_SIO_SET_LINE 0x03 // set databits, parity. value=ipw_dtb_x
-#define IPW_SIO_SET_PIN 0x03 // set/clear dtr/rts value=ipw_pin_xxx
-#define IPW_SIO_POLL 0x08 // get serial port status byte, call with value=0
-#define IPW_SIO_INIT 0x11 // initializes ? value=0 (appears as first thing todo on open)
-#define IPW_SIO_PURGE 0x12 // purge all transmissions?, call with value=numchar_to_purge
-#define IPW_SIO_HANDFLOW 0x13 // set xon/xoff limits value=0, and a buffer of 0x10 bytes
-#define IPW_SIO_SETCHARS 0x13 // set the flowcontrol special chars, value=0, buf=6 bytes,
- // last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13
+#define IPW_SIO_RXCTL 0x00 /* control bulk rx channel transmissions, value=1/0 (on/off) */
+#define IPW_SIO_SET_BAUD 0x01 /* set baud, value=requested ipw_sio_bxxxx */
+#define IPW_SIO_SET_LINE 0x03 /* set databits, parity. value=ipw_dtb_x */
+#define IPW_SIO_SET_PIN 0x03 /* set/clear dtr/rts value=ipw_pin_xxx */
+#define IPW_SIO_POLL 0x08 /* get serial port status byte, call with value=0 */
+#define IPW_SIO_INIT 0x11 /* initializes ? value=0 (appears as first thing todo on open) */
+#define IPW_SIO_PURGE 0x12 /* purge all transmissions?, call with value=numchar_to_purge */
+#define IPW_SIO_HANDFLOW 0x13 /* set xon/xoff limits value=0, and a buffer of 0x10 bytes */
+#define IPW_SIO_SETCHARS 0x13 /* set the flowcontrol special chars, value=0, buf=6 bytes, */
+ /* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */
/* values used for request IPW_SIO_SET_PIN */
#define IPW_PIN_SETDTR 0x101
#define IPW_PIN_SETRTS 0x202
#define IPW_PIN_CLRDTR 0x100
-#define IPW_PIN_CLRRTS 0x200 // unconfirmed
+#define IPW_PIN_CLRRTS 0x200 /* unconfirmed */
/* values used for request IPW_SIO_RXCTL */
#define IPW_RXBULK_ON 1
#define IPW_RXBULK_OFF 0
/* various 16 byte hardcoded transferbuffers used by flow control */
-#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0 }
/* Interpretation of modem status lines */
/* These need sorting out by individually connecting pins and checking
@@ -132,17 +133,6 @@ enum {
#define IPW_CTS ((1<<5) | (1<<4))
#define IPW_WANTS_TO_SEND 0x30
-//#define IPW_DTR /* Data Terminal Ready */
-//#define IPW_CTS /* Clear To Send */
-//#define IPW_CD /* Carrier Detect */
-//#define IPW_DSR /* Data Set Ready */
-//#define IPW_RxD /* Receive pin */
-
-//#define IPW_LE
-//#define IPW_RTS
-//#define IPW_ST
-//#define IPW_SR
-//#define IPW_RI /* Ring Indicator */
static struct usb_device_id usb_ipw_ids[] = {
{ USB_DEVICE(IPW_VID, IPW_PID) },
@@ -177,9 +167,10 @@ static void ipw_read_bulk_callback(struct urb *urb)
return;
}
- usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, data);
- tty = port->tty;
+ tty = port->port.tty;
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
@@ -187,19 +178,22 @@ static void ipw_read_bulk_callback(struct urb *urb)
}
/* Continue trying to always read */
- usb_fill_bulk_urb (port->read_urb, port->serial->dev,
- usb_rcvbulkpipe(port->serial->dev,
+ usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+ usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- ipw_read_bulk_callback, port);
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ ipw_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
return;
}
-static int ipw_open(struct usb_serial_port *port, struct file *filp)
+static int ipw_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct usb_device *dev = port->serial->dev;
u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
@@ -212,29 +206,33 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
if (!buf_flow_init)
return -ENOMEM;
- if (port->tty)
- port->tty->low_latency = 1;
-
- /* --1: Tell the modem to initialize (we think) From sniffs this is always the
- * first thing that gets sent to the modem during opening of the device */
- dbg("%s: Sending SIO_INIT (we guess)",__func__);
- result = usb_control_msg(dev, usb_sndctrlpipe(dev,0),
- IPW_SIO_INIT,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- 0,
- 0, /* index */
- NULL,
- 0,
- 100000);
+ if (tty)
+ tty->low_latency = 1;
+
+ /* --1: Tell the modem to initialize (we think) From sniffs this is
+ * always the first thing that gets sent to the modem during
+ * opening of the device */
+ dbg("%s: Sending SIO_INIT (we guess)", __func__);
+ result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ IPW_SIO_INIT,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ 0,
+ 0, /* index */
+ NULL,
+ 0,
+ 100000);
if (result < 0)
- dev_err(&port->dev, "Init of modem failed (error = %d)\n", result);
+ dev_err(&port->dev,
+ "Init of modem failed (error = %d)\n", result);
/* reset the bulk pipes */
- usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
- usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
+ usb_clear_halt(dev,
+ usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
+ usb_clear_halt(dev,
+ usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
- /*--2: Start reading from the device */
- dbg("%s: setting up bulk read callback",__func__);
+ /*--2: Start reading from the device */
+ dbg("%s: setting up bulk read callback", __func__);
usb_fill_bulk_urb(port->read_urb, dev,
usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
port->bulk_in_buffer,
@@ -242,66 +240,72 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
ipw_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result < 0)
- dbg("%s - usb_submit_urb(read bulk) failed with status %d", __func__, result);
+ dbg("%s - usb_submit_urb(read bulk) failed with status %d",
+ __func__, result);
/*--3: Tell the modem to open the floodgates on the rx bulk channel */
- dbg("%s:asking modem for RxRead (RXBULK_ON)",__func__);
+ dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- IPW_SIO_RXCTL,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_RXBULK_ON,
- 0, /* index */
- NULL,
- 0,
- 100000);
- if (result < 0)
- dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result);
+ IPW_SIO_RXCTL,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ IPW_RXBULK_ON,
+ 0, /* index */
+ NULL,
+ 0,
+ 100000);
+ if (result < 0)
+ dev_err(&port->dev,
+ "Enabling bulk RxRead failed (error = %d)\n", result);
/*--4: setup the initial flowcontrol */
- dbg("%s:setting init flowcontrol (%s)",__func__,buf_flow_init);
+ dbg("%s:setting init flowcontrol (%s)", __func__, buf_flow_init);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- IPW_SIO_HANDFLOW,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- 0,
- 0,
- buf_flow_init,
- 0x10,
- 200000);
+ IPW_SIO_HANDFLOW,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ 0,
+ 0,
+ buf_flow_init,
+ 0x10,
+ 200000);
if (result < 0)
- dev_err(&port->dev, "initial flowcontrol failed (error = %d)\n", result);
+ dev_err(&port->dev,
+ "initial flowcontrol failed (error = %d)\n", result);
/*--5: raise the dtr */
- dbg("%s:raising dtr",__func__);
+ dbg("%s:raising dtr", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- IPW_SIO_SET_PIN,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_PIN_SETDTR,
- 0,
- NULL,
- 0,
- 200000);
+ IPW_SIO_SET_PIN,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ IPW_PIN_SETDTR,
+ 0,
+ NULL,
+ 0,
+ 200000);
if (result < 0)
- dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
+ dev_err(&port->dev,
+ "setting dtr failed (error = %d)\n", result);
/*--6: raise the rts */
- dbg("%s:raising rts",__func__);
+ dbg("%s:raising rts", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- IPW_SIO_SET_PIN,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_PIN_SETRTS,
- 0,
- NULL,
- 0,
- 200000);
+ IPW_SIO_SET_PIN,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ IPW_PIN_SETRTS,
+ 0,
+ NULL,
+ 0,
+ 200000);
if (result < 0)
- dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
-
+ dev_err(&port->dev,
+ "setting dtr failed (error = %d)\n", result);
+
kfree(buf_flow_init);
return 0;
}
-static void ipw_close(struct usb_serial_port *port, struct file * filp)
+static void ipw_close(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct usb_device *dev = port->serial->dev;
int result;
@@ -312,56 +316,62 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
}
/*--1: drop the dtr */
- dbg("%s:dropping dtr",__func__);
+ dbg("%s:dropping dtr", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- IPW_SIO_SET_PIN,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_PIN_CLRDTR,
- 0,
- NULL,
- 0,
- 200000);
+ IPW_SIO_SET_PIN,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ IPW_PIN_CLRDTR,
+ 0,
+ NULL,
+ 0,
+ 200000);
if (result < 0)
- dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result);
+ dev_err(&port->dev, "dropping dtr failed (error = %d)\n",
+ result);
/*--2: drop the rts */
- dbg("%s:dropping rts",__func__);
+ dbg("%s:dropping rts", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_PIN_CLRRTS,
- 0,
- NULL,
- 0,
- 200000);
+ IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
+ USB_RECIP_INTERFACE | USB_DIR_OUT,
+ IPW_PIN_CLRRTS,
+ 0,
+ NULL,
+ 0,
+ 200000);
if (result < 0)
- dev_err(&port->dev, "dropping rts failed (error = %d)\n", result);
+ dev_err(&port->dev,
+ "dropping rts failed (error = %d)\n", result);
/*--3: purge */
- dbg("%s:sending purge",__func__);
+ dbg("%s:sending purge", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- 0x03,
- 0,
- NULL,
- 0,
- 200000);
+ IPW_SIO_PURGE, USB_TYPE_VENDOR |
+ USB_RECIP_INTERFACE | USB_DIR_OUT,
+ 0x03,
+ 0,
+ NULL,
+ 0,
+ 200000);
if (result < 0)
dev_err(&port->dev, "purge failed (error = %d)\n", result);
- /* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
+ /* send RXBULK_off (tell modem to stop transmitting bulk data on
+ rx chan) */
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- IPW_SIO_RXCTL,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_RXBULK_OFF,
- 0, /* index */
- NULL,
- 0,
- 100000);
+ IPW_SIO_RXCTL,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ IPW_RXBULK_OFF,
+ 0, /* index */
+ NULL,
+ 0,
+ 100000);
if (result < 0)
- dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result);
+ dev_err(&port->dev,
+ "Disabling bulk RxRead failed (error = %d)\n", result);
/* shutdown any in-flight urbs that we know about */
usb_kill_urb(port->read_urb);
@@ -384,13 +394,14 @@ static void ipw_write_bulk_callback(struct urb *urb)
usb_serial_port_softint(port);
}
-static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
struct usb_device *dev = port->serial->dev;
int ret;
dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__,
- count, in_interrupt() );
+ count, in_interrupt());
if (count == 0) {
dbg("%s - write request of 0 bytes", __func__);
@@ -421,13 +432,14 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (ret != 0) {
port->write_urb_busy = 0;
- dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __func__, ret);
+ dbg("%s - usb_submit_urb(write bulk) failed with error = %d",
+ __func__, ret);
return ret;
}
dbg("%s returning %d", __func__, count);
return count;
-}
+}
static int ipw_probe(struct usb_serial_port *port)
{
@@ -486,8 +498,8 @@ module_init(usb_ipw_init);
module_exit(usb_ipw_exit);
/* Module information */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);