diff options
Diffstat (limited to 'drivers/usb/serial/iuu_phoenix.c')
| -rw-r--r-- | drivers/usb/serial/iuu_phoenix.c | 102 |
1 files changed, 64 insertions, 38 deletions
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 4473d442b2a..76a3cc327bb 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -40,7 +40,7 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v0.5" +#define DRIVER_VERSION "v0.10" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" static struct usb_device_id id_table[] = { @@ -70,7 +70,6 @@ static void read_rxcmd_callback(struct urb *urb); struct iuu_private { spinlock_t lock; /* store irq state */ wait_queue_head_t delta_msr_wait; - u8 line_control; u8 line_status; u8 termios_initialized; int tiostatus; /* store IUART SIGNAL for tiocmget call */ @@ -651,32 +650,33 @@ static int iuu_bulk_write(struct usb_serial_port *port) unsigned long flags; int result; int i; + int buf_len; char *buf_ptr = port->write_urb->transfer_buffer; dbg("%s - enter", __func__); + spin_lock_irqsave(&priv->lock, flags); *buf_ptr++ = IUU_UART_ESC; *buf_ptr++ = IUU_UART_TX; *buf_ptr++ = priv->writelen; - memcpy(buf_ptr, priv->writebuf, - priv->writelen); + memcpy(buf_ptr, priv->writebuf, priv->writelen); + buf_len = priv->writelen; + priv->writelen = 0; + spin_unlock_irqrestore(&priv->lock, flags); if (debug == 1) { - for (i = 0; i < priv->writelen; i++) + for (i = 0; i < buf_len; i++) sprintf(priv->dbgbuf + i*2 , "%02X", priv->writebuf[i]); - priv->dbgbuf[priv->writelen+i*2] = 0; + priv->dbgbuf[buf_len+i*2] = 0; dbg("%s - writing %i chars : %s", __func__, - priv->writelen, priv->dbgbuf); + buf_len, priv->dbgbuf); } usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), - port->write_urb->transfer_buffer, priv->writelen + 3, + port->write_urb->transfer_buffer, buf_len + 3, iuu_rxcmd, port); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); - spin_lock_irqsave(&priv->lock, flags); - priv->writelen = 0; - spin_unlock_irqrestore(&priv->lock, flags); usb_serial_port_softint(port); return result; } @@ -770,14 +770,10 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, return -ENOMEM; spin_lock_irqsave(&priv->lock, flags); - if (priv->writelen > 0) { - /* buffer already filled but not commited */ - spin_unlock_irqrestore(&priv->lock, flags); - return 0; - } + /* fill the buffer */ - memcpy(priv->writebuf, buf, count); - priv->writelen = count; + memcpy(priv->writebuf + priv->writelen, buf, count); + priv->writelen += count; spin_unlock_irqrestore(&priv->lock, flags); return count; @@ -819,7 +815,7 @@ static int iuu_uart_on(struct usb_serial_port *port) buf[0] = IUU_UART_ENABLE; buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF); buf[2] = (u8) (0x00FF & IUU_BAUD_9600); - buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN); + buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN); status = bulk_immediate(port, buf, 4); if (status != IUU_OPERATION_OK) { @@ -946,19 +942,59 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, return status; } -static int set_control_lines(struct usb_device *dev, u8 value) +static void iuu_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { - return 0; + const u32 supported_mask = CMSPAR|PARENB|PARODD; + + unsigned int cflag = tty->termios->c_cflag; + int status; + u32 actual; + u32 parity; + int csize = CS7; + int baud = 9600; /* Fixed for the moment */ + u32 newval = cflag & supported_mask; + + /* compute the parity parameter */ + parity = 0; + if (cflag & CMSPAR) { /* Using mark space */ + if (cflag & PARODD) + parity |= IUU_PARITY_SPACE; + else + parity |= IUU_PARITY_MARK; + } else if (!(cflag & PARENB)) { + parity |= IUU_PARITY_NONE; + csize = CS8; + } else if (cflag & PARODD) + parity |= IUU_PARITY_ODD; + else + parity |= IUU_PARITY_EVEN; + + parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT); + + /* set it */ + status = iuu_uart_baud(port, + (clockmode == 2) ? 16457 : 9600 * boost / 100, + &actual, parity); + + /* set the termios value to the real one, so the user now what has + * changed. We support few fields so its easies to copy the old hw + * settings back over and then adjust them + */ + if (old_termios) + tty_termios_copy_hw(tty->termios, old_termios); + if (status != 0) /* Set failed - return old bits */ + return; + /* Re-encode speed, parity and csize */ + tty_encode_baud_rate(tty, baud, baud); + tty->termios->c_cflag &= ~(supported_mask|CSIZE); + tty->termios->c_cflag |= newval | csize; } -static void iuu_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void iuu_close(struct usb_serial_port *port) { /* iuu_led (port,255,0,0,0); */ struct usb_serial *serial; - struct iuu_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int c_cflag; serial = port->serial; if (!serial) @@ -968,17 +1004,6 @@ static void iuu_close(struct tty_struct *tty, iuu_uart_off(port); if (serial->dev) { - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - priv = usb_get_serial_port_data(port); - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, 0); - } - } /* free writebuf */ /* shutdown our urbs */ dbg("%s - shutting down urbs", __func__); @@ -1154,7 +1179,7 @@ static int iuu_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - iuu_close(tty, port, NULL); + iuu_close(port); return -EPROTO; } else { dbg("%s - rxcmd OK", __func__); @@ -1175,6 +1200,7 @@ static struct usb_serial_driver iuu_device = { .read_bulk_callback = iuu_uart_read_callback, .tiocmget = iuu_tiocmget, .tiocmset = iuu_tiocmset, + .set_termios = iuu_set_termios, .attach = iuu_startup, .shutdown = iuu_shutdown, }; |