diff options
Diffstat (limited to 'drivers/usb/serial/keyspan.c')
| -rw-r--r-- | drivers/usb/serial/keyspan.c | 234 |
1 files changed, 117 insertions, 117 deletions
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index ea7bba69f4d..857c5312555 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -244,13 +244,13 @@ module_exit(keyspan_exit); static void keyspan_rx_throttle (struct usb_serial_port *port) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); } static void keyspan_rx_unthrottle (struct usb_serial_port *port) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); } @@ -258,7 +258,7 @@ static void keyspan_break_ctl (struct usb_serial_port *port, int break_state) { struct keyspan_port_private *p_priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); p_priv = usb_get_serial_port_data(port); @@ -280,7 +280,7 @@ static void keyspan_set_termios (struct usb_serial_port *port, unsigned int cflag; struct tty_struct *tty = port->tty; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; @@ -377,7 +377,7 @@ static int keyspan_write(struct usb_serial_port *port, } dbg("%s - for port %d (%d chars), flip=%d", - __FUNCTION__, port->number, count, p_priv->out_flip); + __func__, port->number, count, p_priv->out_flip); for (left = count; left > 0; left -= todo) { todo = left; @@ -389,11 +389,11 @@ static int keyspan_write(struct usb_serial_port *port, /* Check we have a valid urb/endpoint before we use it... */ if ((this_urb = p_priv->out_urbs[flip]) == NULL) { /* no bulk out, so return 0 bytes written */ - dbg("%s - no output urb :(", __FUNCTION__); + dbg("%s - no output urb :(", __func__); return count; } - dbg("%s - endpoint %d flip %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), flip); + dbg("%s - endpoint %d flip %d", __func__, usb_pipeendpoint(this_urb->pipe), flip); if (this_urb->status == -EINPROGRESS) { if (time_before(jiffies, p_priv->tx_start_time[flip] + 10 * HZ)) @@ -435,13 +435,13 @@ static void usa26_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); endpoint = usb_pipeendpoint(urb->pipe); if (status) { dbg("%s - nonzero status: %x on endpoint %d.", - __FUNCTION__, status, endpoint); + __func__, status, endpoint); return; } @@ -459,7 +459,7 @@ static void usa26_indat_callback(struct urb *urb) } } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __FUNCTION__); + dbg("%s - RX error!!!!", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -479,7 +479,7 @@ static void usa26_indat_callback(struct urb *urb) urb->dev = port->serial->dev; if (port->open_count) if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } return; } @@ -492,7 +492,7 @@ static void usa2x_outdat_callback(struct urb *urb) port = (struct usb_serial_port *) urb->context; p_priv = usb_get_serial_port_data(port); - dbg ("%s - urb %d", __FUNCTION__, urb == p_priv->out_urbs[1]); + dbg ("%s - urb %d", __func__, urb == p_priv->out_urbs[1]); if (port->open_count) usb_serial_port_softint(port); @@ -500,7 +500,7 @@ static void usa2x_outdat_callback(struct urb *urb) static void usa26_inack_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } @@ -513,7 +513,7 @@ static void usa26_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa26_send_setup(port->serial, port, p_priv->resend_cont - 1); } } @@ -531,11 +531,11 @@ static void usa26_instat_callback(struct urb *urb) serial = (struct usb_serial *) urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length != 9) { - dbg("%s - %d byte report??", __FUNCTION__, urb->actual_length); + dbg("%s - %d byte report??", __func__, urb->actual_length); goto exit; } @@ -543,7 +543,7 @@ static void usa26_instat_callback(struct urb *urb) #if 0 dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d", - __FUNCTION__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff, + __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff, msg->_txXoff, msg->rxEnabled, msg->controlResponse); #endif @@ -552,7 +552,7 @@ static void usa26_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port); + dbg ("%s - Unexpected port number %d", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -576,14 +576,14 @@ static void usa26_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } exit: ; } static void usa26_glocont_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } @@ -597,7 +597,7 @@ static void usa28_indat_callback(struct urb *urb) struct keyspan_port_private *p_priv; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); port = (struct usb_serial_port *) urb->context; p_priv = usb_get_serial_port_data(port); @@ -609,7 +609,7 @@ static void usa28_indat_callback(struct urb *urb) do { if (status) { dbg("%s - nonzero status: %x on endpoint %d.", - __FUNCTION__, status, usb_pipeendpoint(urb->pipe)); + __func__, status, usb_pipeendpoint(urb->pipe)); return; } @@ -629,7 +629,7 @@ static void usa28_indat_callback(struct urb *urb) urb->dev = port->serial->dev; if (port->open_count) if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } p_priv->in_flip ^= 1; @@ -639,7 +639,7 @@ static void usa28_indat_callback(struct urb *urb) static void usa28_inack_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } static void usa28_outcont_callback(struct urb *urb) @@ -651,7 +651,7 @@ static void usa28_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa28_send_setup(port->serial, port, p_priv->resend_cont - 1); } } @@ -670,16 +670,16 @@ static void usa28_instat_callback(struct urb *urb) serial = (struct usb_serial *) urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) { - dbg("%s - bad length %d", __FUNCTION__, urb->actual_length); + dbg("%s - bad length %d", __func__, urb->actual_length); goto exit; } - /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __FUNCTION__ + /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__ data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7], data[8], data[9], data[10], data[11]);*/ @@ -689,7 +689,7 @@ static void usa28_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port); + dbg ("%s - Unexpected port number %d", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -713,14 +713,14 @@ static void usa28_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } exit: ; } static void usa28_glocont_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } @@ -731,7 +731,7 @@ static void usa49_glocont_callback(struct urb *urb) struct keyspan_port_private *p_priv; int i; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = (struct usb_serial *) urb->context; for (i = 0; i < serial->num_ports; ++i) { @@ -739,7 +739,7 @@ static void usa49_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa49_send_setup(serial, port, p_priv->resend_cont - 1); break; } @@ -759,21 +759,21 @@ static void usa49_instat_callback(struct urb *urb) int old_dcd_state; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = (struct usb_serial *) urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa49_portStatusMessage)) { - dbg("%s - bad length %d", __FUNCTION__, urb->actual_length); + dbg("%s - bad length %d", __func__, urb->actual_length); goto exit; } - /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __FUNCTION__, + /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__, data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7], data[8], data[9], data[10]);*/ @@ -782,7 +782,7 @@ static void usa49_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->portNumber >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->portNumber); + dbg ("%s - Unexpected port number %d", __func__, msg->portNumber); goto exit; } port = serial->port[msg->portNumber]; @@ -807,14 +807,14 @@ static void usa49_instat_callback(struct urb *urb) urb->dev = serial->dev; if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } exit: ; } static void usa49_inack_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } static void usa49_indat_callback(struct urb *urb) @@ -826,12 +826,12 @@ static void usa49_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", __FUNCTION__, + dbg("%s - nonzero status: %x on endpoint %d.", __func__, status, endpoint); return; } @@ -866,7 +866,7 @@ static void usa49_indat_callback(struct urb *urb) urb->dev = port->serial->dev; if (port->open_count) if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } } @@ -879,12 +879,12 @@ static void usa49wg_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } @@ -898,7 +898,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* Check port number from message*/ if (data[i] >= serial->num_ports) { dbg ("%s - Unexpected port number %d", - __FUNCTION__, data[i]); + __func__, data[i]); return; } port = serial->port[data[i++]]; @@ -944,13 +944,13 @@ static void usa49wg_indat_callback(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } /* not used, usa-49 doesn't have per-port control endpoints */ static void usa49_outcont_callback(struct urb *urb) { - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); } static void usa90_indat_callback(struct urb *urb) @@ -963,13 +963,13 @@ static void usa90_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); endpoint = usb_pipeendpoint(urb->pipe); if (status) { dbg("%s - nonzero status: %x on endpoint %d.", - __FUNCTION__, status, endpoint); + __func__, status, endpoint); return; } @@ -1000,7 +1000,7 @@ static void usa90_indat_callback(struct urb *urb) } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __FUNCTION__); + dbg("%s - RX error!!!!", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -1021,7 +1021,7 @@ static void usa90_indat_callback(struct urb *urb) urb->dev = port->serial->dev; if (port->open_count) if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } return; } @@ -1040,11 +1040,11 @@ static void usa90_instat_callback(struct urb *urb) serial = (struct usb_serial *) urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length < 14) { - dbg("%s - %d byte report??", __FUNCTION__, urb->actual_length); + dbg("%s - %d byte report??", __func__, urb->actual_length); goto exit; } @@ -1073,7 +1073,7 @@ static void usa90_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } exit: ; @@ -1088,7 +1088,7 @@ static void usa90_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa90_send_setup(port->serial, port, p_priv->resend_cont - 1); } } @@ -1105,17 +1105,17 @@ static void usa67_instat_callback(struct urb *urb) int old_dcd_state; int status = urb->status; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __FUNCTION__, status); + dbg("%s - nonzero status: %x", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) { - dbg("%s - bad length %d", __FUNCTION__, urb->actual_length); + dbg("%s - bad length %d", __func__, urb->actual_length); return; } @@ -1125,7 +1125,7 @@ static void usa67_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port); + dbg ("%s - Unexpected port number %d", __func__, msg->port); return; } @@ -1149,7 +1149,7 @@ static void usa67_instat_callback(struct urb *urb) urb->dev = serial->dev; err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err); + dbg("%s - resubmit read urb failed. (%d)", __func__, err); } static void usa67_glocont_callback(struct urb *urb) @@ -1159,7 +1159,7 @@ static void usa67_glocont_callback(struct urb *urb) struct keyspan_port_private *p_priv; int i; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); serial = urb->context; for (i = 0; i < serial->num_ports; ++i) { @@ -1167,7 +1167,7 @@ static void usa67_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __FUNCTION__); + dbg ("%s - sending setup", __func__); keyspan_usa67_send_setup(serial, port, p_priv->resend_cont - 1); break; @@ -1183,7 +1183,7 @@ static int keyspan_write_room (struct usb_serial_port *port) int data_len; struct urb *this_urb; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; @@ -1228,7 +1228,7 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp) p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; - dbg("%s - port%d.", __FUNCTION__, port->number); + dbg("%s - port%d.", __func__, port->number); /* Set some sane defaults */ p_priv->rts_state = 1; @@ -1253,7 +1253,7 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp) usb_clear_halt(urb->dev, urb->pipe); if ((err = usb_submit_urb(urb, GFP_KERNEL)) != 0) { - dbg("%s - submit urb %d failed (%d)", __FUNCTION__, i, err); + dbg("%s - submit urb %d failed (%d)", __func__, i, err); } } @@ -1305,7 +1305,7 @@ static void keyspan_close(struct usb_serial_port *port, struct file *filp) struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1320,7 +1320,7 @@ static void keyspan_close(struct usb_serial_port *port, struct file *filp) } /*while (p_priv->outcont_urb->status == -EINPROGRESS) { - dbg("%s - urb in progress", __FUNCTION__); + dbg("%s - urb in progress", __func__); }*/ p_priv->out_flip = 0; @@ -1484,10 +1484,10 @@ static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint, if (endpoint == -1) return NULL; /* endpoint not needed */ - dbg ("%s - alloc for endpoint %d.", __FUNCTION__, endpoint); + dbg ("%s - alloc for endpoint %d.", __func__, endpoint); urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg ("%s - alloc for endpoint %d failed.", __FUNCTION__, endpoint); + dbg ("%s - alloc for endpoint %d failed.", __func__, endpoint); return NULL; } @@ -1588,7 +1588,7 @@ static void keyspan_setup_urbs(struct usb_serial *serial) struct callbacks *cback; int endp; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; @@ -1662,7 +1662,7 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg ("%s - %d.", __FUNCTION__, baud_rate); + dbg ("%s - %d.", __func__, baud_rate); /* prevent divide by zero... */ if( (b16 = (baud_rate * 16L)) == 0) { @@ -1695,7 +1695,7 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((cnt >> 8) & 0xff); } if (rate_low && rate_hi) { - dbg ("%s - %d %02x %02x.", __FUNCTION__, baud_rate, *rate_hi, *rate_low); + dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low); } return (KEYSPAN_BAUD_RATE_OK); @@ -1708,7 +1708,7 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u32 b16, /* baud rate times 16 (actual rate used internally) */ div; /* divisor */ - dbg ("%s - %d.", __FUNCTION__, baud_rate); + dbg ("%s - %d.", __func__, baud_rate); /* prevent divide by zero... */ if( (b16 = (baud_rate * 16L)) == 0) @@ -1731,7 +1731,7 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((div >> 8) & 0xff); if (rate_low && rate_hi) - dbg ("%s - %d %02x %02x.", __FUNCTION__, baud_rate, *rate_hi, *rate_low); + dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low); return (KEYSPAN_BAUD_RATE_OK); } @@ -1748,7 +1748,7 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 best_prescaler; int i; - dbg ("%s - %d.", __FUNCTION__, baud_rate); + dbg ("%s - %d.", __func__, baud_rate); /* prevent divide by zero */ if( (b16 = baud_rate * 16L) == 0) { @@ -1796,7 +1796,7 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, } if (prescaler) { *prescaler = best_prescaler; - /* dbg("%s - %d %d", __FUNCTION__, *prescaler, div); */ + /* dbg("%s - %d %d", __func__, *prescaler, div); */ } return (KEYSPAN_BAUD_RATE_OK); } @@ -1809,7 +1809,7 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg ("%s - %d.", __FUNCTION__, baud_rate); + dbg ("%s - %d.", __func__, baud_rate); /* prevent divide by zero */ if ((b16 = baud_rate * 16L) == 0) @@ -1848,7 +1848,7 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, if (rate_hi) { *rate_hi = (u8) ((cnt >> 8) & 0xff); } - dbg ("%s - %d OK.", __FUNCTION__, baud_rate); + dbg ("%s - %d OK.", __func__, baud_rate); return (KEYSPAN_BAUD_RATE_OK); } @@ -1864,7 +1864,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct urb *this_urb; int device_port, err; - dbg ("%s reset=%d", __FUNCTION__, reset_port); + dbg ("%s reset=%d", __func__, reset_port); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1874,11 +1874,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, outcont_urb = d_details->outcont_endpoints[port->number]; this_urb = p_priv->outcont_urb; - dbg("%s - endpoint %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe)); + dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe)); /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb.", __FUNCTION__); + dbg("%s - oops no urb.", __func__); return -1; } @@ -1887,7 +1887,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg ("%s - already writing", __FUNCTION__); */ + /* dbg ("%s - already writing", __func__); */ mdelay(5); return(-1); } @@ -1901,7 +1901,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__, + dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ @@ -1996,11 +1996,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, this_urb->dev = serial->dev; if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { - dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err); + dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); } #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__ + dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__ outcont_urb, this_urb->transfer_buffer_length, usb_pipeendpoint(this_urb->pipe)); } @@ -2020,7 +2020,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, struct urb *this_urb; int device_port, err; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2029,7 +2029,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ if ((this_urb = p_priv->outcont_urb) == NULL) { - dbg("%s - oops no urb.", __FUNCTION__); + dbg("%s - oops no urb.", __func__); return -1; } @@ -2038,7 +2038,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg ("%s already writing", __FUNCTION__); + dbg ("%s already writing", __func__); mdelay(5); return(-1); } @@ -2048,7 +2048,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, msg.setBaudRate = 1; if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate requested %d.", __FUNCTION__, p_priv->baud); + dbg("%s - Invalid baud rate requested %d.", __func__, p_priv->baud); msg.baudLo = 0xff; msg.baudHi = 0xb2; /* Values for 9600 baud */ } @@ -2122,11 +2122,11 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, this_urb->dev = serial->dev; if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { - dbg("%s - usb_submit_urb(setup) failed", __FUNCTION__); + dbg("%s - usb_submit_urb(setup) failed", __func__); } #if 0 else { - dbg("%s - usb_submit_urb(setup) OK %d bytes", __FUNCTION__, + dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__, this_urb->transfer_buffer_length); } #endif @@ -2146,7 +2146,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, struct urb *this_urb; int err, device_port; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2157,11 +2157,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, /* Work out which port within the device is being setup */ device_port = port->number - port->serial->minor; - dbg("%s - endpoint %d port %d (%d)",__FUNCTION__, usb_pipeendpoint(this_urb->pipe), port->number, device_port); + dbg("%s - endpoint %d port %d (%d)",__func__, usb_pipeendpoint(this_urb->pipe), port->number, device_port); /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __FUNCTION__, port->number); + dbg("%s - oops no urb for port %d.", __func__, port->number); return -1; } @@ -2171,7 +2171,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg ("%s - already writing", __FUNCTION__); */ + /* dbg ("%s - already writing", __func__); */ mdelay(5); return(-1); } @@ -2188,7 +2188,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__, + dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ @@ -2307,11 +2307,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, this_urb->dev = serial->dev; } if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { - dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err); + dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); } #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__, + dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__, outcont_urb, this_urb->transfer_buffer_length, usb_pipeendpoint(this_urb->pipe)); } @@ -2332,7 +2332,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, int err; u8 prescaler; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2340,7 +2340,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ if ((this_urb = p_priv->outcont_urb) == NULL) { - dbg("%s - oops no urb.", __FUNCTION__); + dbg("%s - oops no urb.", __func__); return -1; } @@ -2349,7 +2349,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg ("%s already writing", __FUNCTION__); + dbg ("%s already writing", __func__); mdelay(5); return(-1); } @@ -2363,7 +2363,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__, + dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, p_priv->baud); p_priv->baud = 9600; d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, @@ -2453,7 +2453,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, this_urb->dev = serial->dev; if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { - dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err); + dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); } return (0); } @@ -2469,7 +2469,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, struct urb *this_urb; int err, device_port; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2482,7 +2482,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __FUNCTION__, + dbg("%s - oops no urb for port %d.", __func__, port->number); return -1; } @@ -2492,7 +2492,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg ("%s - already writing", __FUNCTION__); */ + /* dbg ("%s - already writing", __func__); */ mdelay(5); return(-1); } @@ -2508,7 +2508,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__, + dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ @@ -2601,7 +2601,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, + dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); return (0); } @@ -2612,7 +2612,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) struct keyspan_serial_private *s_priv; const struct keyspan_device_details *d_details; - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; @@ -2647,20 +2647,20 @@ static int keyspan_startup (struct usb_serial *serial) struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) if (d_details->product_id == le16_to_cpu(serial->dev->descriptor.idProduct)) break; if (d_details == NULL) { - dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __FUNCTION__, le16_to_cpu(serial->dev->descriptor.idProduct)); + dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __func__, le16_to_cpu(serial->dev->descriptor.idProduct)); return 1; } /* Setup private data for serial driver */ s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); if (!s_priv) { - dbg("%s - kmalloc for keyspan_serial_private failed.", __FUNCTION__); + dbg("%s - kmalloc for keyspan_serial_private failed.", __func__); return -ENOMEM; } @@ -2672,7 +2672,7 @@ static int keyspan_startup (struct usb_serial *serial) port = serial->port[i]; p_priv = kzalloc(sizeof(struct keyspan_port_private), GFP_KERNEL); if (!p_priv) { - dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __FUNCTION__, i); + dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i); return (1); } p_priv->device_details = d_details; @@ -2685,14 +2685,14 @@ static int keyspan_startup (struct usb_serial *serial) s_priv->instat_urb->dev = serial->dev; err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit instat urb failed %d", __FUNCTION__, + dbg("%s - submit instat urb failed %d", __func__, err); } if (s_priv->indat_urb != NULL) { s_priv->indat_urb->dev = serial->dev; err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit indat urb failed %d", __FUNCTION__, + dbg("%s - submit indat urb failed %d", __func__, err); } @@ -2706,7 +2706,7 @@ static void keyspan_shutdown (struct usb_serial *serial) struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); |