summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/keyspan_pda.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/keyspan_pda.c')
-rw-r--r--drivers/usb/serial/keyspan_pda.c69
1 files changed, 29 insertions, 40 deletions
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 60b3e22bd63..24a08ac2e4e 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -171,7 +171,7 @@ static void keyspan_pda_wakeup_write(struct work_struct *work)
container_of(work, struct keyspan_pda_private, wakeup_work);
struct usb_serial_port *port = priv->port;
- tty_wakeup(port->tty);
+ tty_wakeup(port->port.tty);
}
static void keyspan_pda_request_unthrottle(struct work_struct *work)
@@ -203,7 +203,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
static void keyspan_pda_rx_interrupt (struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty = port->tty;
+ struct tty_struct *tty = port->port.tty;
unsigned char *data = urb->transfer_buffer;
int i;
int retval;
@@ -266,7 +266,7 @@ exit:
}
-static void keyspan_pda_rx_throttle (struct usb_serial_port *port)
+static void keyspan_pda_rx_throttle(struct tty_struct *tty)
{
/* stop receiving characters. We just turn off the URB request, and
let chars pile up in the device. If we're doing hardware
@@ -274,14 +274,15 @@ static void keyspan_pda_rx_throttle (struct usb_serial_port *port)
fills up. If we're doing XON/XOFF, this would be a good time to
send an XOFF, although it might make sense to foist that off
upon the device too. */
-
+ struct usb_serial_port *port = tty->driver_data;
dbg("keyspan_pda_rx_throttle port %d", port->number);
usb_kill_urb(port->interrupt_in_urb);
}
-static void keyspan_pda_rx_unthrottle (struct usb_serial_port *port)
+static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
/* just restart the receive interrupt URB */
dbg("keyspan_pda_rx_unthrottle port %d", port->number);
port->interrupt_in_urb->dev = port->serial->dev;
@@ -330,8 +331,9 @@ static speed_t keyspan_pda_setbaud (struct usb_serial *serial, speed_t baud)
}
-static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state)
+static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
{
+ struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
int value;
int result;
@@ -354,8 +356,8 @@ static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state
}
-static void keyspan_pda_set_termios (struct usb_serial_port *port,
- struct ktermios *old_termios)
+static void keyspan_pda_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
speed_t speed;
@@ -380,7 +382,7 @@ static void keyspan_pda_set_termios (struct usb_serial_port *port,
For now, just do baud. */
- speed = tty_get_baud_rate(port->tty);
+ speed = tty_get_baud_rate(tty);
speed = keyspan_pda_setbaud(serial, speed);
if (speed == 0) {
@@ -390,8 +392,8 @@ static void keyspan_pda_set_termios (struct usb_serial_port *port,
}
/* Only speed can change so copy the old h/w parameters
then encode the new speed */
- tty_termios_copy_hw(port->tty->termios, old_termios);
- tty_encode_baud_rate(port->tty, speed, speed);
+ tty_termios_copy_hw(tty->termios, old_termios);
+ tty_encode_baud_rate(tty, speed, speed);
}
@@ -425,8 +427,9 @@ static int keyspan_pda_set_modem_info(struct usb_serial *serial,
return rc;
}
-static int keyspan_pda_tiocmget(struct usb_serial_port *port, struct file *file)
+static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file)
{
+ struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
int rc;
unsigned char status;
@@ -445,9 +448,10 @@ static int keyspan_pda_tiocmget(struct usb_serial_port *port, struct file *file)
return value;
}
-static int keyspan_pda_tiocmset(struct usb_serial_port *port, struct file *file,
+static int keyspan_pda_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
+ struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
int rc;
unsigned char status;
@@ -469,23 +473,8 @@ static int keyspan_pda_tiocmset(struct usb_serial_port *port, struct file *file,
return rc;
}
-static int keyspan_pda_ioctl(struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- switch (cmd) {
- case TIOCMIWAIT:
- /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
- /* TODO */
- case TIOCGICOUNT:
- /* return count of modemline transitions */
- return 0; /* TODO */
- }
-
- return -ENOIOCTLCMD;
-}
-
-static int keyspan_pda_write(struct usb_serial_port *port,
- const unsigned char *buf, int count)
+static int keyspan_pda_write(struct tty_struct *tty,
+ struct usb_serial_port *port, const unsigned char *buf, int count)
{
struct usb_serial *serial = port->serial;
int request_unthrottle = 0;
@@ -607,22 +596,21 @@ static void keyspan_pda_write_bulk_callback (struct urb *urb)
}
-static int keyspan_pda_write_room (struct usb_serial_port *port)
+static int keyspan_pda_write_room(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct keyspan_pda_private *priv;
-
priv = usb_get_serial_port_data(port);
-
/* used by n_tty.c for processing of tabs and such. Giving it our
conservative guess is probably good enough, but needs testing by
running a console through the device. */
-
return (priv->tx_room);
}
-static int keyspan_pda_chars_in_buffer (struct usb_serial_port *port)
+static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct keyspan_pda_private *priv;
unsigned long flags;
int ret = 0;
@@ -640,7 +628,8 @@ static int keyspan_pda_chars_in_buffer (struct usb_serial_port *port)
}
-static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp)
+static int keyspan_pda_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial = port->serial;
unsigned char room;
@@ -672,7 +661,7 @@ static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp)
/* the normal serial device seems to always turn on DTR and RTS here,
so do the same */
- if (port->tty->termios->c_cflag & CBAUD)
+ if (tty && (tty->termios->c_cflag & CBAUD))
keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2) );
else
keyspan_pda_set_modem_info(serial, 0);
@@ -690,13 +679,14 @@ error:
}
-static void keyspan_pda_close(struct usb_serial_port *port, struct file *filp)
+static void keyspan_pda_close(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial = port->serial;
if (serial->dev) {
/* the normal serial device seems to always shut off DTR and RTS now */
- if (port->tty->termios->c_cflag & HUPCL)
+ if (tty->termios->c_cflag & HUPCL)
keyspan_pda_set_modem_info(serial, 0);
/* shutdown our bulk reads and writes */
@@ -832,7 +822,6 @@ static struct usb_serial_driver keyspan_pda_device = {
.chars_in_buffer = keyspan_pda_chars_in_buffer,
.throttle = keyspan_pda_rx_throttle,
.unthrottle = keyspan_pda_rx_unthrottle,
- .ioctl = keyspan_pda_ioctl,
.set_termios = keyspan_pda_set_termios,
.break_ctl = keyspan_pda_break_ctl,
.tiocmget = keyspan_pda_tiocmget,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-03 21:17:48 +0000