summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/mos7720.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/mos7720.c')
-rw-r--r--drivers/usb/serial/mos7720.c64
1 files changed, 37 insertions, 27 deletions
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index cc0e54345df..51da424327b 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -40,7 +40,7 @@
#define DRIVER_DESC "Moschip USB Serial Driver"
/* default urb timeout */
-#define MOS_WDR_TIMEOUT (HZ * 5)
+#define MOS_WDR_TIMEOUT 5000
#define MOS_MAX_PORT 0x02
#define MOS_WRITE 0x0E
@@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
__u8 requesttype = (__u8)0xc0;
__u16 index = get_reg_index(reg);
__u16 value = get_reg_value(reg, serial_portnum);
- int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
- index, data, 1, MOS_WDR_TIMEOUT);
- if (status < 0)
+ u8 *buf;
+ int status;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+ index, buf, 1, MOS_WDR_TIMEOUT);
+ if (status == 1)
+ *data = *buf;
+ else if (status < 0)
dev_err(&usbdev->dev,
"mos7720: usb_control_msg() failed: %d", status);
+ kfree(buf);
+
return status;
}
@@ -1036,7 +1047,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
*
* 0x08 : SP1/2 Control Reg
*/
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
read_mos_reg(serial, port_number, LSR, &data);
dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data);
@@ -1055,7 +1066,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00);
read_mos_reg(serial, dummy, SP_CONTROL_REG, &data);
- data = data | (port->number - port->serial->minor + 1);
+ data = data | (port->port_number + 1);
write_mos_reg(serial, dummy, SP_CONTROL_REG, data);
mos7720_port->shadowLCR = 0x83;
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
@@ -1136,8 +1147,8 @@ static void mos7720_close(struct usb_serial_port *port)
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
- write_mos_reg(serial, port->number - port->serial->minor, MCR, 0x00);
- write_mos_reg(serial, port->number - port->serial->minor, IER, 0x00);
+ write_mos_reg(serial, port->port_number, MCR, 0x00);
+ write_mos_reg(serial, port->port_number, IER, 0x00);
mos7720_port->open = 0;
}
@@ -1161,8 +1172,7 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
mos7720_port->shadowLCR = data;
- write_mos_reg(serial, port->number - port->serial->minor,
- LCR, mos7720_port->shadowLCR);
+ write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR);
}
/*
@@ -1293,8 +1303,8 @@ static void mos7720_throttle(struct tty_struct *tty)
/* if we are implementing RTS/CTS, toggle that line */
if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR &= ~UART_MCR_RTS;
- write_mos_reg(port->serial, port->number - port->serial->minor,
- MCR, mos7720_port->shadowMCR);
+ write_mos_reg(port->serial, port->port_number, MCR,
+ mos7720_port->shadowMCR);
if (status != 0)
return;
}
@@ -1325,8 +1335,8 @@ static void mos7720_unthrottle(struct tty_struct *tty)
/* if we are implementing RTS/CTS, toggle that line */
if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR |= UART_MCR_RTS;
- write_mos_reg(port->serial, port->number - port->serial->minor,
- MCR, mos7720_port->shadowMCR);
+ write_mos_reg(port->serial, port->port_number, MCR,
+ mos7720_port->shadowMCR);
if (status != 0)
return;
}
@@ -1350,7 +1360,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
* Init Sequence for higher rates
***********************************************/
dev_dbg(&port->dev, "Sending Setting Commands ..........\n");
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
write_mos_reg(serial, port_number, IER, 0x00);
write_mos_reg(serial, port_number, FCR, 0x00);
@@ -1476,7 +1486,7 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
port = mos7720_port->port;
serial = port->serial;
- number = port->number - port->serial->minor;
+ number = port->port_number;
dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate);
/* Calculate the Divisor */
@@ -1527,7 +1537,7 @@ static void change_port_settings(struct tty_struct *tty,
port = mos7720_port->port;
serial = port->serial;
- port_number = port->number - port->serial->minor;
+ port_number = port->port_number;
if (!mos7720_port->open) {
dev_dbg(&port->dev, "%s - port not opened\n", __func__);
@@ -1618,7 +1628,7 @@ static void change_port_settings(struct tty_struct *tty,
mos7720_port->shadowMCR |= (UART_MCR_XONANY);
/* To set hardware flow control to the specified *
* serial port, in SP1/2_CONTROL_REG */
- if (port->number)
+ if (port_number)
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
else
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
@@ -1720,7 +1730,7 @@ static int get_lsr_info(struct tty_struct *tty,
struct usb_serial_port *port = tty->driver_data;
unsigned int result = 0;
unsigned char data = 0;
- int port_number = port->number - port->serial->minor;
+ int port_number = port->port_number;
int count;
count = mos7720_chars_in_buffer(tty);
@@ -1782,8 +1792,8 @@ static int mos7720_tiocmset(struct tty_struct *tty,
mcr &= ~UART_MCR_LOOP;
mos7720_port->shadowMCR = mcr;
- write_mos_reg(port->serial, port->number - port->serial->minor,
- MCR, mos7720_port->shadowMCR);
+ write_mos_reg(port->serial, port->port_number, MCR,
+ mos7720_port->shadowMCR);
return 0;
}
@@ -1827,8 +1837,8 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
}
mos7720_port->shadowMCR = mcr;
- write_mos_reg(port->serial, port->number - port->serial->minor,
- MCR, mos7720_port->shadowMCR);
+ write_mos_reg(port->serial, port->port_number, MCR,
+ mos7720_port->shadowMCR);
return 0;
}
@@ -1844,8 +1854,8 @@ static int get_serial_info(struct moschip_port *mos7720_port,
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
- tmp.line = mos7720_port->port->serial->minor;
- tmp.port = mos7720_port->port->number;
+ tmp.line = mos7720_port->port->minor;
+ tmp.port = mos7720_port->port->port_number;
tmp.irq = 0;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
@@ -1927,7 +1937,7 @@ static int mos7720_startup(struct usb_serial *serial)
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+ (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
/* start the interrupt urb */
ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
@@ -1970,7 +1980,7 @@ static void mos7720_release(struct usb_serial *serial)
/* wait for synchronous usb calls to return */
if (mos_parport->msg_pending)
wait_for_completion_timeout(&mos_parport->syncmsg_compl,
- MOS_WDR_TIMEOUT);
+ msecs_to_jiffies(MOS_WDR_TIMEOUT));
parport_remove_port(mos_parport->pp);
usb_set_serial_data(serial, NULL);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-28 17:48:04 +0000