summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/mos7840.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/mos7840.c')
-rw-r--r--drivers/usb/serial/mos7840.c478
1 files changed, 183 insertions, 295 deletions
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 402c32d7acc..d6d4eeca8c6 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -252,8 +252,6 @@ struct moschip_port {
struct timer_list led_timer2; /* Timer for LED off */
};
-static bool debug;
-
/*
* mos7840_set_reg_sync
* To set the Control register by calling usb_fill_control_urb function
@@ -265,7 +263,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
{
struct usb_device *dev = port->serial->dev;
val = val & 0x00ff;
- dbg("mos7840_set_reg_sync offset is %x, value %x", reg, val);
+ dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -293,7 +291,7 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH,
MOS_WDR_TIMEOUT);
*val = buf[0];
- dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val);
+ dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val);
kfree(buf);
return ret;
@@ -316,21 +314,16 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
if (port->serial->num_ports == 4) {
val |= (((__u16) port->number -
(__u16) (port->serial->minor)) + 1) << 8;
- dbg("mos7840_set_uart_reg application number is %x", val);
} else {
if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
val |= (((__u16) port->number -
(__u16) (port->serial->minor)) + 1) << 8;
- dbg("mos7840_set_uart_reg application number is %x",
- val);
} else {
- val |=
- (((__u16) port->number -
+ val |= (((__u16) port->number -
(__u16) (port->serial->minor)) + 2) << 8;
- dbg("mos7840_set_uart_reg application number is %x",
- val);
}
}
+ dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
MCS_WR_RTYPE, val, reg, NULL, 0,
MOS_WDR_TIMEOUT);
@@ -354,27 +347,21 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
if (!buf)
return -ENOMEM;
- /* dbg("application number is %4x",
- (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
/* Wval is same as application number */
if (port->serial->num_ports == 4) {
Wval =
(((__u16) port->number - (__u16) (port->serial->minor)) +
1) << 8;
- dbg("mos7840_get_uart_reg application number is %x", Wval);
} else {
if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
Wval = (((__u16) port->number -
(__u16) (port->serial->minor)) + 1) << 8;
- dbg("mos7840_get_uart_reg application number is %x",
- Wval);
} else {
Wval = (((__u16) port->number -
(__u16) (port->serial->minor)) + 2) << 8;
- dbg("mos7840_get_uart_reg application number is %x",
- Wval);
}
}
+ dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
MOS_WDR_TIMEOUT);
@@ -384,14 +371,13 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
return ret;
}
-static void mos7840_dump_serial_port(struct moschip_port *mos7840_port)
+static void mos7840_dump_serial_port(struct usb_serial_port *port,
+ struct moschip_port *mos7840_port)
{
- dbg("***************************************");
- dbg("SpRegOffset is %2x", mos7840_port->SpRegOffset);
- dbg("ControlRegOffset is %2x", mos7840_port->ControlRegOffset);
- dbg("DCRRegOffset is %2x", mos7840_port->DcrRegOffset);
- dbg("***************************************");
+ dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset);
+ dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset);
+ dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset);
}
@@ -450,8 +436,6 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
{
struct async_icount *icount;
- dbg("%s - %02x", __func__, new_lsr);
-
if (new_lsr & SERIAL_LSR_BI) {
/*
* Parity and Framing errors only count if they
@@ -492,6 +476,7 @@ static void mos7840_control_callback(struct urb *urb)
{
unsigned char *data;
struct moschip_port *mos7840_port;
+ struct device *dev = &urb->dev->dev;
__u8 regval = 0x0;
int result = 0;
int status = urb->status;
@@ -506,21 +491,19 @@ static void mos7840_control_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __func__,
- status);
+ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __func__,
- status);
+ dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
goto exit;
}
- dbg("%s urb buffer size is %d", __func__, urb->actual_length);
- dbg("%s mos7840_port->MsrLsr is %d port %d", __func__,
- mos7840_port->MsrLsr, mos7840_port->port_num);
+ dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
+ dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__,
+ mos7840_port->MsrLsr, mos7840_port->port_num);
data = urb->transfer_buffer;
regval = (__u8) data[0];
- dbg("%s data is %x", __func__, regval);
+ dev_dbg(dev, "%s data is %x\n", __func__, regval);
if (mos7840_port->MsrLsr == 0)
mos7840_handle_new_msr(mos7840_port, regval);
else if (mos7840_port->MsrLsr == 1)
@@ -532,8 +515,7 @@ exit:
result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC);
spin_unlock(&mos7840_port->pool_lock);
if (result) {
- dev_err(&urb->dev->dev,
- "%s - Error %d submitting interrupt urb\n",
+ dev_err(dev, "%s - Error %d submitting interrupt urb\n",
__func__, result);
}
}
@@ -570,12 +552,12 @@ static void mos7840_set_led_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* This urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __func__,
- urb->status);
+ dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d",
+ __func__, urb->status);
break;
default:
- dbg("%s - nonzero urb status received: %d", __func__,
- urb->status);
+ dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d",
+ __func__, urb->status);
}
}
@@ -650,12 +632,12 @@ static void mos7840_interrupt_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __func__,
- status);
+ dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
+ __func__, status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __func__,
- status);
+ dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n",
+ __func__, status);
goto exit;
}
@@ -672,7 +654,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
* Byte 5 FIFO status for both */
if (length && length > 5) {
- dbg("%s", "Wrong data !!!");
+ dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n");
return;
}
@@ -689,17 +671,17 @@ static void mos7840_interrupt_callback(struct urb *urb)
(__u16) (serial->minor)) + 1) << 8;
if (mos7840_port->open) {
if (sp[i] & 0x01) {
- dbg("SP%d No Interrupt !!!", i);
+ dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i);
} else {
switch (sp[i] & 0x0f) {
case SERIAL_IIR_RLS:
- dbg("Serial Port %d: Receiver status error or ", i);
- dbg("address bit detected in 9-bit mode");
+ dev_dbg(&urb->dev->dev, "Serial Port %d: Receiver status error or \n", i);
+ dev_dbg(&urb->dev->dev, "address bit detected in 9-bit mode\n");
mos7840_port->MsrLsr = 1;
wreg = LINE_STATUS_REGISTER;
break;
case SERIAL_IIR_MS:
- dbg("Serial Port %d: Modem status change", i);
+ dev_dbg(&urb->dev->dev, "Serial Port %d: Modem status change\n", i);
mos7840_port->MsrLsr = 0;
wreg = MODEM_STATUS_REGISTER;
break;
@@ -731,11 +713,11 @@ static int mos7840_port_paranoia_check(struct usb_serial_port *port,
const char *function)
{
if (!port) {
- dbg("%s - port == NULL", function);
+ pr_debug("%s - port == NULL\n", function);
return -1;
}
if (!port->serial) {
- dbg("%s - port->serial == NULL", function);
+ pr_debug("%s - port->serial == NULL\n", function);
return -1;
}
@@ -747,11 +729,11 @@ static int mos7840_serial_paranoia_check(struct usb_serial *serial,
const char *function)
{
if (!serial) {
- dbg("%s - serial == NULL", function);
+ pr_debug("%s - serial == NULL\n", function);
return -1;
}
if (!serial->type) {
- dbg("%s - serial->type == NULL!", function);
+ pr_debug("%s - serial->type == NULL!\n", function);
return -1;
}
@@ -790,49 +772,44 @@ static void mos7840_bulk_in_callback(struct urb *urb)
int status = urb->status;
mos7840_port = urb->context;
- if (!mos7840_port) {
- dbg("%s", "NULL mos7840_port pointer");
+ if (!mos7840_port)
return;
- }
if (status) {
- dbg("nonzero read bulk status received: %d", status);
+ dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status);
mos7840_port->read_urb_busy = false;
return;
}
- port = (struct usb_serial_port *)mos7840_port->port;
+ port = mos7840_port->port;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed");
mos7840_port->read_urb_busy = false;
return;
}
serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
- dbg("%s", "Bad serial pointer");
mos7840_port->read_urb_busy = false;
return;
}
data = urb->transfer_buffer;
+ usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
if (urb->actual_length) {
tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty) {
tty_insert_flip_string(tty, data, urb->actual_length);
- dbg(" %s ", data);
tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
mos7840_port->icount.rx += urb->actual_length;
smp_wmb();
- dbg("mos7840_port->icount.rx is %d:",
- mos7840_port->icount.rx);
+ dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx);
}
if (!mos7840_port->read_urb) {
- dbg("%s", "URB KILLED !!!");
+ dev_dbg(&port->dev, "%s", "URB KILLED !!!\n");
mos7840_port->read_urb_busy = false;
return;
}
@@ -850,7 +827,7 @@ static void mos7840_bulk_in_callback(struct urb *urb)
retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
if (retval) {
- dbg("usb_submit_urb(read bulk) failed, retval = %d", retval);
+ dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval);
mos7840_port->read_urb_busy = false;
}
}
@@ -864,11 +841,13 @@ static void mos7840_bulk_in_callback(struct urb *urb)
static void mos7840_bulk_out_data_callback(struct urb *urb)
{
struct moschip_port *mos7840_port;
+ struct usb_serial_port *port;
struct tty_struct *tty;
int status = urb->status;
int i;
mos7840_port = urb->context;
+ port = mos7840_port->port;
spin_lock(&mos7840_port->pool_lock);
for (i = 0; i < NUM_URBS; i++) {
if (urb == mos7840_port->write_urb_pool[i]) {
@@ -879,16 +858,14 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
spin_unlock(&mos7840_port->pool_lock);
if (status) {
- dbg("nonzero write bulk status received:%d", status);
+ dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status);
return;
}
- if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) {
- dbg("%s", "Port Paranoia failed");
+ if (mos7840_port_paranoia_check(port, __func__))
return;
- }
- tty = tty_port_tty_get(&mos7840_port->port->port);
+ tty = tty_port_tty_get(&port->port);
if (tty && mos7840_port->open)
tty_wakeup(tty);
tty_kref_put(tty);
@@ -929,17 +906,13 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
struct moschip_port *mos7840_port;
struct moschip_port *port0;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed");
+ if (mos7840_port_paranoia_check(port, __func__))
return -ENODEV;
- }
serial = port->serial;
- if (mos7840_serial_paranoia_check(serial, __func__)) {
- dbg("%s", "Serial Paranoia failed");
+ if (mos7840_serial_paranoia_check(serial, __func__))
return -ENODEV;
- }
mos7840_port = mos7840_get_port_private(port);
port0 = mos7840_get_port_private(serial->port[0]);
@@ -990,20 +963,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
Data = 0x0;
status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
if (status < 0) {
- dbg("Reading Spreg failed");
+ dev_dbg(&port->dev, "Reading Spreg failed\n");
return -1;
}
Data |= 0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
- dbg("writing Spreg failed");
+ dev_dbg(&port->dev, "writing Spreg failed\n");
return -1;
}
Data &= ~0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
- dbg("writing Spreg failed");
+ dev_dbg(&port->dev, "writing Spreg failed\n");
return -1;
}
/* End of block to be checked */
@@ -1012,7 +985,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
&Data);
if (status < 0) {
- dbg("Reading Controlreg failed");
+ dev_dbg(&port->dev, "Reading Controlreg failed\n");
return -1;
}
Data |= 0x08; /* Driver done bit */
@@ -1020,7 +993,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
status = mos7840_set_reg_sync(port,
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
- dbg("writing Controlreg failed");
+ dev_dbg(&port->dev, "writing Controlreg failed\n");
return -1;
}
/* do register settings here */
@@ -1031,21 +1004,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
Data = 0x00;
status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (status < 0) {
- dbg("disabling interrupts failed");
+ dev_dbg(&port->dev, "disabling interrupts failed\n");
return -1;
}
/* Set FIFO_CONTROL_REGISTER to the default value */
Data = 0x00;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed");
+ dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
return -1;
}
Data = 0xcf;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed");
+ dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
return -1;
}
@@ -1142,12 +1115,12 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
* (can't set it up in mos7840_startup as the *
* structures were not set up at that time.) */
- dbg("port number is %d", port->number);
- dbg("serial number is %d", port->serial->minor);
- dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
- dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
- dbg("Interrupt endpoint is %d", port->interrupt_in_endpointAddress);
- dbg("port's number in the device is %d", mos7840_port->port_num);
+ dev_dbg(&port->dev, "port number is %d\n", port->number);
+ dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor);
+ dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+ dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
+ dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
+ dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num);
mos7840_port->read_urb = port->read_urb;
/* set up our bulk in urb */
@@ -1171,8 +1144,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
mos7840_bulk_in_callback, mos7840_port);
}
- dbg("mos7840_open: bulkin endpoint is %d",
- port->bulk_in_endpointAddress);
+ dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress);
mos7840_port->read_urb_busy = true;
response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
if (response) {
@@ -1197,9 +1169,6 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
mos7840_port->icount.tx = 0;
mos7840_port->icount.rx = 0;
- dbg("usb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p",
- serial, mos7840_port, port);
-
return 0;
}
@@ -1221,10 +1190,8 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
unsigned long flags;
struct moschip_port *mos7840_port;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port");
+ if (mos7840_port_paranoia_check(port, __func__))
return 0;
- }
mos7840_port = mos7840_get_port_private(port);
if (mos7840_port == NULL)
@@ -1238,7 +1205,7 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
}
}
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
- dbg("%s - returns %d", __func__, chars);
+ dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
@@ -1256,16 +1223,12 @@ static void mos7840_close(struct usb_serial_port *port)
int j;
__u16 Data;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed");
+ if (mos7840_port_paranoia_check(port, __func__))
return;
- }
serial = mos7840_get_usb_serial(port, __func__);
- if (!serial) {
- dbg("%s", "Serial Paranoia failed");
+ if (!serial)
return;
- }
mos7840_port = mos7840_get_port_private(port);
port0 = mos7840_get_port_private(serial->port[0]);
@@ -1291,27 +1254,26 @@ static void mos7840_close(struct usb_serial_port *port)
* and interrupt read if they exists */
if (serial->dev) {
if (mos7840_port->write_urb) {
- dbg("%s", "Shutdown bulk write");
+ dev_dbg(&port->dev, "%s", "Shutdown bulk write\n");
usb_kill_urb(mos7840_port->write_urb);
}
if (mos7840_port->read_urb) {
- dbg("%s", "Shutdown bulk read");
+ dev_dbg(&port->dev, "%s", "Shutdown bulk read\n");
usb_kill_urb(mos7840_port->read_urb);
mos7840_port->read_urb_busy = false;
}
if ((&mos7840_port->control_urb)) {
- dbg("%s", "Shutdown control read");
+ dev_dbg(&port->dev, "%s", "Shutdown control read\n");
/*/ usb_kill_urb (mos7840_port->control_urb); */
}
}
/* if(mos7840_port->ctrl_buf != NULL) */
/* kfree(mos7840_port->ctrl_buf); */
port0->open_ports--;
- dbg("mos7840_num_open_ports in close%d:in port%d",
- port0->open_ports, port->number);
+ dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number);
if (port0->open_ports == 0) {
if (serial->port[0]->interrupt_in_urb) {
- dbg("%s", "Shutdown interrupt_in_urb");
+ dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
usb_kill_urb(serial->port[0]->interrupt_in_urb);
}
}
@@ -1363,7 +1325,7 @@ static void mos7840_block_until_chase_response(struct tty_struct *tty,
/* No activity.. count down section */
wait--;
if (wait == 0) {
- dbg("%s - TIMEOUT", __func__);
+ dev_dbg(&mos7840_port->port->dev, "%s - TIMEOUT\n", __func__);
return;
} else {
/* Reset timeout value back to seconds */
@@ -1384,16 +1346,12 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
struct usb_serial *serial;
struct moschip_port *mos7840_port;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed");
+ if (mos7840_port_paranoia_check(port, __func__))
return;
- }
serial = mos7840_get_usb_serial(port, __func__);
- if (!serial) {
- dbg("%s", "Serial Paranoia failed");
+ if (!serial)
return;
- }
mos7840_port = mos7840_get_port_private(port);
@@ -1411,8 +1369,7 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
/* FIXME: no locking on shadowLCR anywhere in driver */
mos7840_port->shadowLCR = data;
- dbg("mcs7840_break mos7840_port->shadowLCR is %x",
- mos7840_port->shadowLCR);
+ dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
mos7840_port->shadowLCR);
}
@@ -1433,17 +1390,12 @@ static int mos7840_write_room(struct tty_struct *tty)
unsigned long flags;
struct moschip_port *mos7840_port;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port");
- dbg("%s", " mos7840_write_room:leaving ...........");
+ if (mos7840_port_paranoia_check(port, __func__))
return -1;
- }
mos7840_port = mos7840_get_port_private(port);
- if (mos7840_port == NULL) {
- dbg("%s", "mos7840_break:leaving ...........");
+ if (mos7840_port == NULL)
return -1;
- }
spin_lock_irqsave(&mos7840_port->pool_lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
@@ -1453,7 +1405,7 @@ static int mos7840_write_room(struct tty_struct *tty)
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1;
- dbg("%s - returns %d", __func__, room);
+ dev_dbg(&mos7840_port->port->dev, "%s - returns %d\n", __func__, room);
return room;
}
@@ -1486,9 +1438,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
Data = 0x00;
status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
mos7840_port->shadowLCR = Data;
- dbg("mos7840_write: LINE_CONTROL_REGISTER is %x", Data);
- dbg("mos7840_write: mos7840_port->shadowLCR is %x",
- mos7840_port->shadowLCR);
+ dev_dbg(&port->dev, "%s: LINE_CONTROL_REGISTER is %x\n", __func__, Data);
+ dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
/* Data = 0x03; */
/* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */
@@ -1501,34 +1452,27 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
/* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
Data = 0x00;
status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
- dbg("mos7840_write:DLL value is %x", Data);
+ dev_dbg(&port->dev, "%s: DLL value is %x\n", __func__, Data);
Data = 0x0;
status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
- dbg("mos7840_write:DLM value is %x", Data);
+ dev_dbg(&port->dev, "%s: DLM value is %x\n", __func__, Data);
Data = Data & ~SERIAL_LCR_DLAB;
- dbg("mos7840_write: mos7840_port->shadowLCR is %x",
- mos7840_port->shadowLCR);
+ dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
#endif
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed");
+ if (mos7840_port_paranoia_check(port, __func__))
return -1;
- }
serial = port->serial;
- if (mos7840_serial_paranoia_check(serial, __func__)) {
- dbg("%s", "Serial Paranoia failed");
+ if (mos7840_serial_paranoia_check(serial, __func__))
return -1;
- }
mos7840_port = mos7840_get_port_private(port);
- if (mos7840_port == NULL) {
- dbg("%s", "mos7840_port is NULL");
+ if (mos7840_port == NULL)
return -1;
- }
/* try to find a free urb in the list */
urb = NULL;
@@ -1538,14 +1482,14 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
if (!mos7840_port->busy[i]) {
mos7840_port->busy[i] = 1;
urb = mos7840_port->write_urb_pool[i];
- dbg("URB:%d", i);
+ dev_dbg(&port->dev, "URB:%d\n", i);
break;
}
}
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
if (urb == NULL) {
- dbg("%s - no more free urbs", __func__);
+ dev_dbg(&port->dev, "%s - no more free urbs\n", __func__);
goto exit;
}
@@ -1585,7 +1529,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
}
data1 = urb->transfer_buffer;
- dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
+ dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
/* Turn on LED */
if (mos7840_port->has_led && !mos7840_port->led_flag) {
@@ -1608,7 +1552,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
bytes_sent = transfer_size;
mos7840_port->icount.tx += transfer_size;
smp_wmb();
- dbg("mos7840_port->icount.tx is %d:", mos7840_port->icount.tx);
+ dev_dbg(&port->dev, "mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
exit:
return bytes_sent;
@@ -1626,12 +1570,8 @@ static void mos7840_throttle(struct tty_struct *tty)
struct moschip_port *mos7840_port;
int status;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port");
+ if (mos7840_port_paranoia_check(port, __func__))
return;
- }
-
- dbg("- port %d", port->number);
mos7840_port = mos7840_get_port_private(port);
@@ -1639,7 +1579,7 @@ static void mos7840_throttle(struct tty_struct *tty)
return;
if (!mos7840_port->open) {
- dbg("%s", "port not opened");
+ dev_dbg(&port->dev, "%s", "port not opened\n");
return;
}
@@ -1672,16 +1612,14 @@ static void mos7840_unthrottle(struct tty_struct *tty)
int status;
struct moschip_port *mos7840_port = mos7840_get_port_private(port);
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port");
+ if (mos7840_port_paranoia_check(port, __func__))
return;
- }
if (mos7840_port == NULL)
return;
if (!mos7840_port->open) {
- dbg("%s - port not opened", __func__);
+ dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return;
}
@@ -1726,7 +1664,7 @@ static int mos7840_tiocmget(struct tty_struct *tty)
| ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)
| ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);
- dbg("%s - 0x%04X", __func__, result);
+ dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
return result;
}
@@ -1764,7 +1702,7 @@ static int mos7840_tiocmset(struct tty_struct *tty,
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed");
+ dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n");
return status;
}
@@ -1776,10 +1714,11 @@ static int mos7840_tiocmset(struct tty_struct *tty,
* this function calculates the proper baud rate divisor for the specified
* baud rate.
*****************************************************************************/
-static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
+static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port,
+ int baudRate, int *divisor,
__u16 *clk_sel_val)
{
- dbg("%s - %d", __func__, baudRate);
+ dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate);
if (baudRate <= 115200) {
*divisor = 115200 / baudRate;
@@ -1832,11 +1771,11 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
custom++;
*divisor = custom;
- dbg(" Baud %d = %d", baudrate, custom);
+ dev_dbg(&port->dev, " Baud %d = %d\n", baudrate, custom);
return 0;
}
- dbg("%s", " Baud calculation Failed...");
+ dev_dbg(&port->dev, "%s", " Baud calculation Failed...\n");
return -1;
#endif
}
@@ -1860,21 +1799,17 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
if (mos7840_port == NULL)
return -1;
- port = (struct usb_serial_port *)mos7840_port->port;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port");
+ port = mos7840_port->port;
+ if (mos7840_port_paranoia_check(port, __func__))
return -1;
- }
- if (mos7840_serial_paranoia_check(port->serial, __func__)) {
- dbg("%s", "Invalid Serial");
+ if (mos7840_serial_paranoia_check(port->serial, __func__))
return -1;
- }
number = mos7840_port->port->number - mos7840_port->port->serial->minor;
- dbg("%s - port = %d, baud = %d", __func__,
- mos7840_port->port->number, baudRate);
+ dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__,
+ mos7840_port->port->number, baudRate);
/* reset clk_uart_sel in spregOffset */
if (baudRate > 115200) {
#ifdef HW_flow_control
@@ -1885,7 +1820,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
Data);
if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud");
+ dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
return -1;
}
#endif
@@ -1898,7 +1833,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
Data);
if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud");
+ dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
return -1;
}
#endif
@@ -1908,19 +1843,19 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
if (1) { /* baudRate <= 115200) */
clk_sel_val = 0x0;
Data = 0x0;
- status = mos7840_calc_baud_rate_divisor(baudRate, &divisor,
+ status = mos7840_calc_baud_rate_divisor(port, baudRate, &divisor,
&clk_sel_val);
status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
&Data);
if (status < 0) {
- dbg("reading spreg failed in set_serial_baud");
+ dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n");
return -1;
}
Data = (Data & 0x8f) | clk_sel_val;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset,
Data);
if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud");
+ dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
return -1;
}
/* Calculate the Divisor */
@@ -1936,11 +1871,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
/* Write the divisor */
Data = (unsigned char)(divisor & 0xff);
- dbg("set_serial_baud Value to write DLL is %x", Data);
+ dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data);
mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
Data = (unsigned char)((divisor & 0xff00) >> 8);
- dbg("set_serial_baud Value to write DLM is %x", Data);
+ dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data);
mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
/* Disable access to divisor latch */
@@ -1975,24 +1910,18 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
if (mos7840_port == NULL)
return;
- port = (struct usb_serial_port *)mos7840_port->port;
+ port = mos7840_port->port;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port");
+ if (mos7840_port_paranoia_check(port, __func__))
return;
- }
- if (mos7840_serial_paranoia_check(port->serial, __func__)) {
- dbg("%s", "Invalid Serial");
+ if (mos7840_serial_paranoia_check(port->serial, __func__))
return;
- }
serial = port->serial;
- dbg("%s - port %d", __func__, mos7840_port->port->number);
-
if (!mos7840_port->open) {
- dbg("%s - port not opened", __func__);
+ dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return;
}
@@ -2027,14 +1956,14 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
if (cflag & PARENB) {
if (cflag & PARODD) {
lParity = LCR_PAR_ODD;
- dbg("%s - parity = odd", __func__);
+ dev_dbg(&port->dev, "%s - parity = odd\n", __func__);
} else {
lParity = LCR_PAR_EVEN;
- dbg("%s - parity = even", __func__);
+ dev_dbg(&port->dev, "%s - parity = even\n", __func__);
}
} else {
- dbg("%s - parity = none", __func__);
+ dev_dbg(&port->dev, "%s - parity = none\n", __func__);
}
if (cflag & CMSPAR)
@@ -2043,10 +1972,10 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
/* Change the Stop bit */
if (cflag & CSTOPB) {
lStop = LCR_STOP_2;
- dbg("%s - stop bits = 2", __func__);
+ dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__);
} else {
lStop = LCR_STOP_1;
- dbg("%s - stop bits = 1", __func__);
+ dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__);
}
/* Update the LCR with the correct value */
@@ -2054,8 +1983,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
mos7840_port->shadowLCR |= (lData | lParity | lStop);
- dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x",
- mos7840_port->shadowLCR);
+ dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__,
+ mos7840_port->shadowLCR);
/* Disable Interrupts */
Data = 0x00;
mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
@@ -2096,11 +2025,11 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
if (!baud) {
/* pick a default, any default... */
- dbg("%s", "Picked default baud...");
+ dev_dbg(&port->dev, "%s", "Picked default baud...\n");
baud = 9600;
}
- dbg("%s - baud rate = %d", __func__, baud);
+ dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud);
status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud);
/* Enable Interrupts */
@@ -2111,15 +2040,15 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
mos7840_port->read_urb_busy = true;
status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
if (status) {
- dbg("usb_submit_urb(read bulk) failed, status = %d",
+ dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
status);
mos7840_port->read_urb_busy = false;
}
}
wake_up(&mos7840_port->delta_msr_wait);
mos7840_port->delta_msr_cond = 1;
- dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x",
- mos7840_port->shadowLCR);
+ dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__,
+ mos7840_port->shadowLCR);
}
/*****************************************************************************
@@ -2137,17 +2066,13 @@ static void mos7840_set_termios(struct tty_struct *tty,
struct usb_serial *serial;
struct moschip_port *mos7840_port;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port");
+ if (mos7840_port_paranoia_check(port, __func__))
return;
- }
serial = port->serial;
- if (mos7840_serial_paranoia_check(serial, __func__)) {
- dbg("%s", "Invalid Serial");
+ if (mos7840_serial_paranoia_check(serial, __func__))
return;
- }
mos7840_port = mos7840_get_port_private(port);
@@ -2155,26 +2080,26 @@ static void mos7840_set_termios(struct tty_struct *tty,
return;
if (!mos7840_port->open) {
- dbg("%s - port not opened", __func__);
+ dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return;
}
- dbg("%s", "setting termios - ");
+ dev_dbg(&port->dev, "%s", "setting termios - \n");
cflag = tty->termios.c_cflag;
- dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
- dbg("%s - old clfag %08x old iflag %08x", __func__,
- old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__,
+ tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
+ dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
+ old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
+ dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
/* change the port settings to the new ones specified */
mos7840_change_port_settings(tty, mos7840_port, old_termios);
if (!mos7840_port->read_urb) {
- dbg("%s", "URB KILLED !!!!!");
+ dev_dbg(&port->dev, "%s", "URB KILLED !!!!!\n");
return;
}
@@ -2182,7 +2107,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
mos7840_port->read_urb_busy = true;
status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
if (status) {
- dbg("usb_submit_urb(read bulk) failed, status = %d",
+ dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
status);
mos7840_port->read_urb_busy = false;
}
@@ -2207,10 +2132,8 @@ static int mos7840_get_lsr_info(struct tty_struct *tty,
unsigned int result = 0;
count = mos7840_chars_in_buffer(tty);
- if (count == 0) {
- dbg("%s -- Empty", __func__);
+ if (count == 0)
result = TIOCSER_TEMT;
- }
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
@@ -2273,8 +2196,8 @@ static int mos7840_get_icount(struct tty_struct *tty,
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
- port->number, icount->rx, icount->tx);
+ dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__,
+ icount->rx, icount->tx);
return 0;
}
@@ -2293,35 +2216,33 @@ static int mos7840_ioctl(struct tty_struct *tty,
struct async_icount cnow;
struct async_icount cprev;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port");
+ if (mos7840_port_paranoia_check(port, __func__))
return -1;
- }
mos7840_port = mos7840_get_port_private(port);
if (mos7840_port == NULL)
return -1;
- dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+ dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd);
switch (cmd) {
/* return number of bytes available */
case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
+ dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);
return mos7840_get_lsr_info(tty, argp);
case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
+ dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__);
return mos7840_get_serial_info(mos7840_port, argp);
case TIOCSSERIAL:
- dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
+ dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__);
break;
case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
+ dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__);
cprev = mos7840_port->icount;
while (1) {
/* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */
@@ -2437,11 +2358,6 @@ static int mos7840_startup(struct usb_serial *serial)
int i, status;
__u16 Data;
- if (!serial) {
- dbg("%s", "Invalid Handler");
- return -1;
- }
-
dev = serial->dev;
/* we set up the pointers to the endpoints in the mos7840_open *
@@ -2449,7 +2365,7 @@ static int mos7840_startup(struct usb_serial *serial)
/* set up port private structures */
for (i = 0; i < serial->num_ports; ++i) {
- dbg ("mos7840_startup: configuring port %d............", i);
+ dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i);
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7840_port == NULL) {
dev_err(&dev->dev, "%s - Out of memory\n", __func__);
@@ -2470,10 +2386,10 @@ static int mos7840_startup(struct usb_serial *serial)
* usb-serial.c:get_free_serial() and cannot therefore be used
* to index device instances */
mos7840_port->port_num = i + 1;
- dbg ("serial->port[i]->number = %d", serial->port[i]->number);
- dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
- dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
- dbg ("serial->minor = %d", serial->minor);
+ dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number);
+ dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor);
+ dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
+ dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor);
if (mos7840_port->port_num == 1) {
mos7840_port->SpRegOffset = 0x0;
@@ -2500,18 +2416,17 @@ static int mos7840_startup(struct usb_serial *serial)
mos7840_port->ControlRegOffset = 0xd;
mos7840_port->DcrRegOffset = 0x1c;
}
- mos7840_dump_serial_port(mos7840_port);
+ mos7840_dump_serial_port(serial->port[i], mos7840_port);
mos7840_set_port_private(serial->port[i], mos7840_port);
/* enable rx_disable bit in control register */
status = mos7840_get_reg_sync(serial->port[i],
mos7840_port->ControlRegOffset, &Data);
if (status < 0) {
- dbg("Reading ControlReg failed status-0x%x", status);
+ dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status);
break;
} else
- dbg("ControlReg Reading success val is %x, status%d",
- Data, status);
+ dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
Data |= 0x08; /* setting driver done bit */
Data |= 0x04; /* sp1_bit to have cts change reflect in
modem status reg */
@@ -2520,11 +2435,10 @@ static int mos7840_startup(struct usb_serial *serial)
status = mos7840_set_reg_sync(serial->port[i],
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
- dbg("Writing ControlReg failed(rx_disable) status-0x%x", status);
+ dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
break;
} else
- dbg("ControlReg Writing success(rx_disable) status%d",
- status);
+ dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
and 0x24 in DCR3 */
@@ -2532,61 +2446,57 @@ static int mos7840_startup(struct usb_serial *serial)
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (mos7840_port->DcrRegOffset + 0), Data);
if (status < 0) {
- dbg("Writing DCR0 failed status-0x%x", status);
+ dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status);
break;
} else
- dbg("DCR0 Writing success status%d", status);
+ dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status);
Data = 0x05;
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (mos7840_port->DcrRegOffset + 1), Data);
if (status < 0) {
- dbg("Writing DCR1 failed status-0x%x", status);
+ dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status);
break;
} else
- dbg("DCR1 Writing success status%d", status);
+ dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status);
Data = 0x24;
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (mos7840_port->DcrRegOffset + 2), Data);
if (status < 0) {
- dbg("Writing DCR2 failed status-0x%x", status);
+ dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status);
break;
} else
- dbg("DCR2 Writing success status%d", status);
+ dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status);
/* write values in clkstart0x0 and clkmulti 0x20 */
Data = 0x0;
status = mos7840_set_reg_sync(serial->port[i],
CLK_START_VALUE_REGISTER, Data);
if (status < 0) {
- dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x", status);
+ dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
break;
} else
- dbg("CLK_START_VALUE_REGISTER Writing success status%d", status);
+ dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
Data = 0x20;
status = mos7840_set_reg_sync(serial->port[i],
CLK_MULTI_REGISTER, Data);
if (status < 0) {
- dbg("Writing CLK_MULTI_REGISTER failed status-0x%x",
- status);
+ dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
goto error;
} else
- dbg("CLK_MULTI_REGISTER Writing success status%d",
- status);
+ dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
/* write value 0x0 to scratchpad register */
Data = 0x00;
status = mos7840_set_uart_reg(serial->port[i],
SCRATCH_PAD_REGISTER, Data);
if (status < 0) {
- dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x",
- status);
+ dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
break;
} else
- dbg("SCRATCH_PAD_REGISTER Writing success status%d",
- status);
+ dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
/* Zero Length flag register */
if ((mos7840_port->port_num != 1)
@@ -2596,31 +2506,25 @@ static int mos7840_startup(struct usb_serial *serial)
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (ZLP_REG1 +
((__u16)mos7840_port->port_num)), Data);
- dbg("ZLIP offset %x",
- (__u16) (ZLP_REG1 +
- ((__u16) mos7840_port->port_num)));
+ dev_dbg(&dev->dev, "ZLIP offset %x\n",
+ (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
if (status < 0) {
- dbg("Writing ZLP_REG%d failed status-0x%x",
- i + 2, status);
+ dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status);
break;
} else
- dbg("ZLP_REG%d Writing success status%d",
- i + 2, status);
+ dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status);
} else {
Data = 0xff;
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (ZLP_REG1 +
((__u16)mos7840_port->port_num) - 0x1), Data);
- dbg("ZLIP offset %x",
- (__u16) (ZLP_REG1 +
- ((__u16) mos7840_port->port_num) - 0x1));
+ dev_dbg(&dev->dev, "ZLIP offset %x\n",
+ (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
if (status < 0) {
- dbg("Writing ZLP_REG%d failed status-0x%x",
- i + 1, status);
+ dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status);
break;
} else
- dbg("ZLP_REG%d Writing success status%d",
- i + 1, status);
+ dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status);
}
mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -2661,16 +2565,15 @@ static int mos7840_startup(struct usb_serial *serial)
MODEM_CONTROL_REGISTER, 0x0300);
}
}
- dbg ("mos7840_startup: all ports configured...........");
/* Zero Length flag enable */
Data = 0x0f;
status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
if (status < 0) {
- dbg("Writing ZLP_REG5 failed status-0x%x", status);
+ dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
goto error;
} else
- dbg("ZLP_REG5 Writing success status%d", status);
+ dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status);
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
@@ -2700,11 +2603,6 @@ static void mos7840_disconnect(struct usb_serial *serial)
unsigned long flags;
struct moschip_port *mos7840_port;
- if (!serial) {
- dbg("%s", "Invalid Handler");
- return;
- }
-
/* check for the ports to be closed,close the ports and disconnect */
/* free private structure allocated for serial port *
@@ -2712,7 +2610,6 @@ static void mos7840_disconnect(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
- dbg ("mos7840_port %d = %p", i, mos7840_port);
if (mos7840_port) {
spin_lock_irqsave(&mos7840_port->pool_lock, flags);
mos7840_port->zombie = 1;
@@ -2732,11 +2629,6 @@ static void mos7840_release(struct usb_serial *serial)
int i;
struct moschip_port *mos7840_port;
- if (!serial) {
- dbg("%s", "Invalid Handler");
- return;
- }
-
/* check for the ports to be closed,close the ports and disconnect */
/* free private structure allocated for serial port *
@@ -2744,7 +2636,6 @@ static void mos7840_release(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
- dbg("mos7840_port %d = %p", i, mos7840_port);
if (mos7840_port) {
if (mos7840_port->has_led) {
/* Turn off LED */
@@ -2801,6 +2692,3 @@ module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 07:29:30 +0000