diff options
Diffstat (limited to 'drivers/usb/serial/pl2303.c')
| -rw-r--r-- | drivers/usb/serial/pl2303.c | 828 |
1 files changed, 398 insertions, 430 deletions
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 65e4d046951..9c18173e33f 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -81,10 +81,12 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, + { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver pl2303_driver = { .name = "pl2303", @@ -127,65 +129,6 @@ static struct usb_driver pl2303_driver = { #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 -/* function prototypes for a PL2303 serial converter */ -static int pl2303_open (struct usb_serial_port *port, struct file *filp); -static void pl2303_close (struct usb_serial_port *port, struct file *filp); -static void pl2303_set_termios (struct usb_serial_port *port, - struct termios *old); -static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg); -static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs); -static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs); -static int pl2303_write (struct usb_serial_port *port, - const unsigned char *buf, int count); -static void pl2303_send (struct usb_serial_port *port); -static int pl2303_write_room(struct usb_serial_port *port); -static int pl2303_chars_in_buffer(struct usb_serial_port *port); -static void pl2303_break_ctl(struct usb_serial_port *port,int break_state); -static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file); -static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, - unsigned int set, unsigned int clear); -static int pl2303_startup (struct usb_serial *serial); -static void pl2303_shutdown (struct usb_serial *serial); -static struct pl2303_buf *pl2303_buf_alloc(unsigned int size); -static void pl2303_buf_free(struct pl2303_buf *pb); -static void pl2303_buf_clear(struct pl2303_buf *pb); -static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb); -static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb); -static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, - unsigned int count); -static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, - unsigned int count); - - -/* All of the device info needed for the PL2303 SIO serial converter */ -static struct usb_serial_driver pl2303_device = { - .driver = { - .owner = THIS_MODULE, - .name = "pl2303", - }, - .id_table = id_table, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .open = pl2303_open, - .close = pl2303_close, - .write = pl2303_write, - .ioctl = pl2303_ioctl, - .break_ctl = pl2303_break_ctl, - .set_termios = pl2303_set_termios, - .tiocmget = pl2303_tiocmget, - .tiocmset = pl2303_tiocmset, - .read_bulk_callback = pl2303_read_bulk_callback, - .read_int_callback = pl2303_read_int_callback, - .write_bulk_callback = pl2303_write_bulk_callback, - .write_room = pl2303_write_room, - .chars_in_buffer = pl2303_chars_in_buffer, - .attach = pl2303_startup, - .shutdown = pl2303_shutdown, -}; enum pl2303_type { type_0, /* don't know the difference between type 0 and */ @@ -204,8 +147,166 @@ struct pl2303_private { enum pl2303_type type; }; +/* + * pl2303_buf_alloc + * + * Allocate a circular buffer and all associated memory. + */ +static struct pl2303_buf *pl2303_buf_alloc(unsigned int size) +{ + struct pl2303_buf *pb; + + if (size == 0) + return NULL; + + pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL); + if (pb == NULL) + return NULL; + + pb->buf_buf = kmalloc(size, GFP_KERNEL); + if (pb->buf_buf == NULL) { + kfree(pb); + return NULL; + } + + pb->buf_size = size; + pb->buf_get = pb->buf_put = pb->buf_buf; -static int pl2303_startup (struct usb_serial *serial) + return pb; +} + +/* + * pl2303_buf_free + * + * Free the buffer and all associated memory. + */ +static void pl2303_buf_free(struct pl2303_buf *pb) +{ + if (pb) { + kfree(pb->buf_buf); + kfree(pb); + } +} + +/* + * pl2303_buf_clear + * + * Clear out all data in the circular buffer. + */ +static void pl2303_buf_clear(struct pl2303_buf *pb) +{ + if (pb != NULL) + pb->buf_get = pb->buf_put; + /* equivalent to a get of all data available */ +} + +/* + * pl2303_buf_data_avail + * + * Return the number of bytes of data available in the circular + * buffer. + */ +static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb) +{ + if (pb == NULL) + return 0; + + return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); +} + +/* + * pl2303_buf_space_avail + * + * Return the number of bytes of space available in the circular + * buffer. + */ +static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb) +{ + if (pb == NULL) + return 0; + + return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); +} + +/* + * pl2303_buf_put + * + * Copy data data from a user buffer and put it into the circular buffer. + * Restrict to the amount of space available. + * + * Return the number of bytes copied. + */ +static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, + unsigned int count) +{ + unsigned int len; + + if (pb == NULL) + return 0; + + len = pl2303_buf_space_avail(pb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = pb->buf_buf + pb->buf_size - pb->buf_put; + if (count > len) { + memcpy(pb->buf_put, buf, len); + memcpy(pb->buf_buf, buf+len, count - len); + pb->buf_put = pb->buf_buf + count - len; + } else { + memcpy(pb->buf_put, buf, count); + if (count < len) + pb->buf_put += count; + else /* count == len */ + pb->buf_put = pb->buf_buf; + } + + return count; +} + +/* + * pl2303_buf_get + * + * Get data from the circular buffer and copy to the given buffer. + * Restrict to the amount of data available. + * + * Return the number of bytes copied. + */ +static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, + unsigned int count) +{ + unsigned int len; + + if (pb == NULL) + return 0; + + len = pl2303_buf_data_avail(pb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = pb->buf_buf + pb->buf_size - pb->buf_get; + if (count > len) { + memcpy(buf, pb->buf_get, len); + memcpy(buf+len, pb->buf_buf, count - len); + pb->buf_get = pb->buf_buf + count - len; + } else { + memcpy(buf, pb->buf_get, count); + if (count < len) + pb->buf_get += count; + else /* count == len */ + pb->buf_get = pb->buf_buf; + } + + return count; +} + +static int pl2303_startup(struct usb_serial *serial) { struct pl2303_private *priv; enum pl2303_type type = type_0; @@ -247,36 +348,17 @@ cleanup: return -ENOMEM; } -static int set_control_lines (struct usb_device *dev, u8 value) +static int set_control_lines(struct usb_device *dev, u8 value) { int retval; - retval = usb_control_msg (dev, usb_sndctrlpipe (dev, 0), - SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, - value, 0, NULL, 0, 100); + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, + value, 0, NULL, 0, 100); dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval); return retval; } -static int pl2303_write (struct usb_serial_port *port, const unsigned char *buf, int count) -{ - struct pl2303_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - - dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); - - if (!count) - return count; - - spin_lock_irqsave(&priv->lock, flags); - count = pl2303_buf_put(priv->buf, buf, count); - spin_unlock_irqrestore(&priv->lock, flags); - - pl2303_send(port); - - return count; -} - static void pl2303_send(struct usb_serial_port *port) { int count, result; @@ -293,7 +375,7 @@ static void pl2303_send(struct usb_serial_port *port) } count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer, - port->bulk_out_size); + port->bulk_out_size); if (count == 0) { spin_unlock_irqrestore(&priv->lock, flags); @@ -304,13 +386,15 @@ static void pl2303_send(struct usb_serial_port *port) spin_unlock_irqrestore(&priv->lock, flags); - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, + port->write_urb->transfer_buffer); port->write_urb->transfer_buffer_length = count; port->write_urb->dev = port->serial->dev; - result = usb_submit_urb (port->write_urb, GFP_ATOMIC); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result); + dev_err(&port->dev, "%s - failed submitting write urb," + " error %d\n", __FUNCTION__, result); priv->write_urb_in_use = 0; // TODO: reschedule pl2303_send } @@ -318,6 +402,26 @@ static void pl2303_send(struct usb_serial_port *port) usb_serial_port_softint(port); } +static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf, + int count) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); + + if (!count) + return count; + + spin_lock_irqsave(&priv->lock, flags); + count = pl2303_buf_put(priv->buf, buf, count); + spin_unlock_irqrestore(&priv->lock, flags); + + pl2303_send(port); + + return count; +} + static int pl2303_write_room(struct usb_serial_port *port) { struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -350,7 +454,8 @@ static int pl2303_chars_in_buffer(struct usb_serial_port *port) return chars; } -static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios) +static void pl2303_set_termios(struct usb_serial_port *port, + struct termios *old_termios) { struct usb_serial *serial = port->serial; struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -371,7 +476,8 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { *(port->tty->termios) = tty_std_termios; - port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + port->tty->termios->c_cflag = B9600 | CS8 | CREAD | + HUPCL | CLOCAL; priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); @@ -380,24 +486,24 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol /* check that they really want us to change something */ if (old_termios) { if ((cflag == old_termios->c_cflag) && - (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) { - dbg("%s - nothing to change...", __FUNCTION__); - return; + (RELEVANT_IFLAG(port->tty->termios->c_iflag) == + RELEVANT_IFLAG(old_termios->c_iflag))) { + dbg("%s - nothing to change...", __FUNCTION__); + return; } } - buf = kzalloc (7, GFP_KERNEL); + buf = kzalloc(7, GFP_KERNEL); if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); return; } - - i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0), - GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, - 0, 0, buf, 7, 100); - dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); + i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CSIZE) { switch (cflag & CSIZE) { @@ -429,7 +535,8 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol case B230400: baud = 230400; break; case B460800: baud = 460800; break; default: - dev_err(&port->dev, "pl2303 driver does not support the baudrate requested (fix it)\n"); + dev_err(&port->dev, "pl2303 driver does not support" + " the baudrate requested (fix it)\n"); break; } dbg("%s - baud = %d", __FUNCTION__, baud); @@ -469,10 +576,10 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol dbg("%s - parity = none", __FUNCTION__); } - i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), - SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, - 0, 0, buf, 7, 100); - dbg ("0x21:0x20:0:0 %d", i); + i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + dbg("0x21:0x20:0:0 %d", i); /* change control lines if we are switching to or from B0 */ spin_lock_irqsave(&priv->lock, flags); @@ -488,13 +595,13 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol } else { spin_unlock_irqrestore(&priv->lock, flags); } - + buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0; - i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0), - GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, - 0, 0, buf, 7, 100); - dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, + i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CRTSCTS) { @@ -503,18 +610,82 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol index = 0x61; else index = 0x41; - i = usb_control_msg(serial->dev, + i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE, 0x0, index, NULL, 0, 100); - dbg ("0x40:0x1:0x0:0x%x %d", index, i); + dbg("0x40:0x1:0x0:0x%x %d", index, i); + } + + kfree(buf); +} + +static void pl2303_close(struct usb_serial_port *port, struct file *filp) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int c_cflag; + int bps; + long timeout; + wait_queue_t wait; + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* wait for data to drain from the buffer */ + spin_lock_irqsave(&priv->lock, flags); + timeout = PL2303_CLOSING_WAIT; + init_waitqueue_entry(&wait, current); + add_wait_queue(&port->tty->write_wait, &wait); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + if (pl2303_buf_data_avail(priv->buf) == 0 || + timeout == 0 || signal_pending(current) || + !usb_get_intfdata(port->serial->interface)) /* disconnect */ + break; + spin_unlock_irqrestore(&priv->lock, flags); + timeout = schedule_timeout(timeout); + spin_lock_irqsave(&priv->lock, flags); } + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->tty->write_wait, &wait); + /* clear out any remaining data in the buffer */ + pl2303_buf_clear(priv->buf); + spin_unlock_irqrestore(&priv->lock, flags); + + /* wait for characters to drain from the device */ + /* (this is long enough for the entire 256 byte */ + /* pl2303 hardware buffer to drain with no flow */ + /* control for data rates of 1200 bps or more, */ + /* for lower rates we should really know how much */ + /* data is in the buffer to compute a delay */ + /* that is not unnecessarily long) */ + bps = tty_get_baud_rate(port->tty); + if (bps > 1200) + timeout = max((HZ*2560)/bps,HZ/10); + else + timeout = 2*HZ; + schedule_timeout_interruptible(timeout); - kfree (buf); + /* shutdown our urbs */ + dbg("%s - shutting down urbs", __FUNCTION__); + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + usb_kill_urb(port->interrupt_in_urb); + + if (port->tty) { + c_cflag = port->tty->termios->c_cflag; + if (c_cflag & HUPCL) { + /* drop DTR and RTS */ + spin_lock_irqsave(&priv->lock, flags); + priv->line_control = 0; + spin_unlock_irqrestore(&priv->lock, flags); + set_control_lines(port->serial->dev, 0); + } + } } -static int pl2303_open (struct usb_serial_port *port, struct file *filp) +static int pl2303_open(struct usb_serial_port *port, struct file *filp) { struct termios tmp_termios; struct usb_serial *serial = port->serial; @@ -568,98 +739,35 @@ static int pl2303_open (struct usb_serial_port *port, struct file *filp) /* Setup termios */ if (port->tty) { - pl2303_set_termios (port, &tmp_termios); + pl2303_set_termios(port, &tmp_termios); } //FIXME: need to assert RTS and DTR if CRTSCTS off dbg("%s - submitting read urb", __FUNCTION__); port->read_urb->dev = serial->dev; - result = usb_submit_urb (port->read_urb, GFP_KERNEL); + result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); - pl2303_close (port, NULL); + dev_err(&port->dev, "%s - failed submitting read urb," + " error %d\n", __FUNCTION__, result); + pl2303_close(port, NULL); return -EPROTO; } dbg("%s - submitting interrupt urb", __FUNCTION__); port->interrupt_in_urb->dev = serial->dev; - result = usb_submit_urb (port->interrupt_in_urb, GFP_KERNEL); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { - dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", __FUNCTION__, result); - pl2303_close (port, NULL); + dev_err(&port->dev, "%s - failed submitting interrupt urb," + " error %d\n", __FUNCTION__, result); + pl2303_close(port, NULL); return -EPROTO; } return 0; } - -static void pl2303_close (struct usb_serial_port *port, struct file *filp) -{ - struct pl2303_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; - - dbg("%s - port %d", __FUNCTION__, port->number); - - /* wait for data to drain from the buffer */ - spin_lock_irqsave(&priv->lock, flags); - timeout = PL2303_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&port->tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (pl2303_buf_data_avail(priv->buf) == 0 - || timeout == 0 || signal_pending(current) - || !usb_get_intfdata(port->serial->interface)) /* disconnect */ - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->tty->write_wait, &wait); - /* clear out any remaining data in the buffer */ - pl2303_buf_clear(priv->buf); - spin_unlock_irqrestore(&priv->lock, flags); - - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - bps = tty_get_baud_rate(port->tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps,HZ/10); - else - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - - /* shutdown our urbs */ - dbg("%s - shutting down urbs", __FUNCTION__); - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - - if (port->tty) { - c_cflag = port->tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore (&priv->lock, flags); - set_control_lines (port->serial->dev, 0); - } - } -} - -static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, - unsigned int set, unsigned int clear) +static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -668,7 +776,7 @@ static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, if (!usb_get_intfdata(port->serial->interface)) return -ENODEV; - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); if (set & TIOCM_RTS) priv->line_control |= CONTROL_RTS; if (set & TIOCM_DTR) @@ -678,12 +786,12 @@ static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, if (clear & TIOCM_DTR) priv->line_control &= ~CONTROL_DTR; control = priv->line_control; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); - return set_control_lines (port->serial->dev, control); + return set_control_lines(port->serial->dev, control); } -static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file) +static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -696,10 +804,10 @@ static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file) if (!usb_get_intfdata(port->serial->interface)) return -ENODEV; - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; status = priv->line_status; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0) | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0) @@ -721,22 +829,22 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) unsigned int status; unsigned int changed; - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); prevstatus = priv->line_status; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); while (1) { interruptible_sleep_on(&priv->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; - - spin_lock_irqsave (&priv->lock, flags); + + spin_lock_irqsave(&priv->lock, flags); status = priv->line_status; - spin_unlock_irqrestore (&priv->lock, flags); - + spin_unlock_irqrestore(&priv->lock, flags); + changed=prevstatus^status; - + if (((arg & TIOCM_RNG) && (changed & UART_RING)) || ((arg & TIOCM_DSR) && (changed & UART_DSR)) || ((arg & TIOCM_CD) && (changed & UART_DCD)) || @@ -749,7 +857,8 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg) +static int pl2303_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) { dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd); @@ -766,7 +875,7 @@ static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsign return -ENOIOCTLCMD; } -static void pl2303_break_ctl (struct usb_serial_port *port, int break_state) +static void pl2303_break_ctl(struct usb_serial_port *port, int break_state) { struct usb_serial *serial = port->serial; u16 state; @@ -780,15 +889,14 @@ static void pl2303_break_ctl (struct usb_serial_port *port, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on"); - result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), - BREAK_REQUEST, BREAK_REQUEST_TYPE, state, - 0, NULL, 0, 100); + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + BREAK_REQUEST, BREAK_REQUEST_TYPE, state, + 0, NULL, 0, 100); if (result) dbg("%s - error sending break = %d", __FUNCTION__, result); } - -static void pl2303_shutdown (struct usb_serial *serial) +static void pl2303_shutdown(struct usb_serial *serial) { int i; struct pl2303_private *priv; @@ -802,7 +910,7 @@ static void pl2303_shutdown (struct usb_serial *serial) kfree(priv); usb_set_serial_port_data(serial->port[i], NULL); } - } + } } static void pl2303_update_line_status(struct usb_serial_port *port, @@ -814,29 +922,33 @@ static void pl2303_update_line_status(struct usb_serial_port *port, unsigned long flags; u8 status_idx = UART_STATE; u8 length = UART_STATE + 1; + u16 idv, idp; + + idv = le16_to_cpu(port->serial->dev->descriptor.idVendor); + idp = le16_to_cpu(port->serial->dev->descriptor.idProduct); - if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && - (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 || - le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_SX1 || - le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X75)) { - length = 1; - status_idx = 0; + + if (idv == SIEMENS_VENDOR_ID) { + if (idp == SIEMENS_PRODUCT_ID_X65 || + idp == SIEMENS_PRODUCT_ID_SX1 || + idp == SIEMENS_PRODUCT_ID_X75) { + + length = 1; + status_idx = 0; + } } if (actual_length < length) - goto exit; + return; /* Save off the uart status for others to look at */ spin_lock_irqsave(&priv->lock, flags); priv->line_status = data[status_idx]; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible (&priv->delta_msr_wait); - -exit: - return; + wake_up_interruptible(&priv->delta_msr_wait); } -static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs) +static void pl2303_read_int_callback(struct urb *urb, struct pt_regs *regs) { struct usb_serial_port *port = (struct usb_serial_port *) urb->context; unsigned char *data = urb->transfer_buffer; @@ -853,25 +965,29 @@ static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + dbg("%s - urb shutting down with status: %d", __FUNCTION__, + urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + dbg("%s - nonzero urb status received: %d", __FUNCTION__, + urb->status); goto exit; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + urb->actual_length, urb->transfer_buffer); + pl2303_update_line_status(port, data, actual_length); exit: - status = usb_submit_urb (urb, GFP_ATOMIC); + status = usb_submit_urb(urb, GFP_ATOMIC); if (status) - dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", __FUNCTION__, status); } - -static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) +static void pl2303_read_bulk_callback(struct urb *urb, struct pt_regs *regs) { struct usb_serial_port *port = (struct usb_serial_port *) urb->context; struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -892,20 +1008,25 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } if (urb->status == -EPROTO) { - /* PL2303 mysteriously fails with -EPROTO reschedule the read */ - dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__); + /* PL2303 mysteriously fails with -EPROTO reschedule + * the read */ + dbg("%s - caught -EPROTO, resubmitting the urb", + __FUNCTION__); urb->status = 0; urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&urb->dev->dev, "%s - failed" + " resubmitting read urb, error %d\n", + __FUNCTION__, result); return; } dbg("%s - unable to handle the error, exiting.", __FUNCTION__); return; } - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + urb->actual_length, data); /* get tty_flag from status */ tty_flag = TTY_NORMAL; @@ -914,7 +1035,7 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) status = priv->line_status; priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible (&priv->delta_msr_wait); + wake_up_interruptible(&priv->delta_msr_wait); /* break takes precedence over parity, */ /* which takes precedence over framing errors */ @@ -933,8 +1054,8 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) if (status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); for (i = 0; i < urb->actual_length; ++i) - tty_insert_flip_char (tty, data[i], tty_flag); - tty_flip_buffer_push (tty); + tty_insert_flip_char(tty, data[i], tty_flag); + tty_flip_buffer_push(tty); } /* Schedule the next read _if_ we are still open */ @@ -942,15 +1063,14 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); + dev_err(&urb->dev->dev, "%s - failed resubmitting" + " read urb, error %d\n", __FUNCTION__, result); } return; } - - -static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs) +static void pl2303_write_bulk_callback(struct urb *urb, struct pt_regs *regs) { struct usb_serial_port *port = (struct usb_serial_port *) urb->context; struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -966,18 +1086,21 @@ static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + dbg("%s - urb shutting down with status: %d", __FUNCTION__, + urb->status); priv->write_urb_in_use = 0; return; default: /* error in the urb, so we have to resubmit it */ dbg("%s - Overflow in write", __FUNCTION__); - dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); + dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, + urb->status); port->write_urb->transfer_buffer_length = 1; port->write_urb->dev = port->serial->dev; - result = usb_submit_urb (port->write_urb, GFP_ATOMIC); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", __FUNCTION__, result); + dev_err(&urb->dev->dev, "%s - failed resubmitting write" + " urb, error %d\n", __FUNCTION__, result); else return; } @@ -988,191 +1111,38 @@ static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs) pl2303_send(port); } +/* All of the device info needed for the PL2303 SIO serial converter */ +static struct usb_serial_driver pl2303_device = { + .driver = { + .owner = THIS_MODULE, + .name = "pl2303", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = pl2303_open, + .close = pl2303_close, + .write = pl2303_write, + .ioctl = pl2303_ioctl, + .break_ctl = pl2303_break_ctl, + .set_termios = pl2303_set_termios, + .tiocmget = pl2303_tiocmget, + .tiocmset = pl2303_tiocmset, + .read_bulk_callback = pl2303_read_bulk_callback, + .read_int_callback = pl2303_read_int_callback, + .write_bulk_callback = pl2303_write_bulk_callback, + .write_room = pl2303_write_room, + .chars_in_buffer = pl2303_chars_in_buffer, + .attach = pl2303_startup, + .shutdown = pl2303_shutdown, +}; -/* - * pl2303_buf_alloc - * - * Allocate a circular buffer and all associated memory. - */ - -static struct pl2303_buf *pl2303_buf_alloc(unsigned int size) -{ - - struct pl2303_buf *pb; - - - if (size == 0) - return NULL; - - pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL); - if (pb == NULL) - return NULL; - - pb->buf_buf = kmalloc(size, GFP_KERNEL); - if (pb->buf_buf == NULL) { - kfree(pb); - return NULL; - } - - pb->buf_size = size; - pb->buf_get = pb->buf_put = pb->buf_buf; - - return pb; - -} - - -/* - * pl2303_buf_free - * - * Free the buffer and all associated memory. - */ - -static void pl2303_buf_free(struct pl2303_buf *pb) -{ - if (pb) { - kfree(pb->buf_buf); - kfree(pb); - } -} - - -/* - * pl2303_buf_clear - * - * Clear out all data in the circular buffer. - */ - -static void pl2303_buf_clear(struct pl2303_buf *pb) -{ - if (pb != NULL) - pb->buf_get = pb->buf_put; - /* equivalent to a get of all data available */ -} - - -/* - * pl2303_buf_data_avail - * - * Return the number of bytes of data available in the circular - * buffer. - */ - -static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb) -{ - if (pb != NULL) - return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); - else - return 0; -} - - -/* - * pl2303_buf_space_avail - * - * Return the number of bytes of space available in the circular - * buffer. - */ - -static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb) -{ - if (pb != NULL) - return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); - else - return 0; -} - - -/* - * pl2303_buf_put - * - * Copy data data from a user buffer and put it into the circular buffer. - * Restrict to the amount of space available. - * - * Return the number of bytes copied. - */ - -static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, - unsigned int count) -{ - - unsigned int len; - - - if (pb == NULL) - return 0; - - len = pl2303_buf_space_avail(pb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = pb->buf_buf + pb->buf_size - pb->buf_put; - if (count > len) { - memcpy(pb->buf_put, buf, len); - memcpy(pb->buf_buf, buf+len, count - len); - pb->buf_put = pb->buf_buf + count - len; - } else { - memcpy(pb->buf_put, buf, count); - if (count < len) - pb->buf_put += count; - else /* count == len */ - pb->buf_put = pb->buf_buf; - } - - return count; - -} - - -/* - * pl2303_buf_get - * - * Get data from the circular buffer and copy to the given buffer. - * Restrict to the amount of data available. - * - * Return the number of bytes copied. - */ - -static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, - unsigned int count) -{ - - unsigned int len; - - - if (pb == NULL) - return 0; - - len = pl2303_buf_data_avail(pb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = pb->buf_buf + pb->buf_size - pb->buf_get; - if (count > len) { - memcpy(buf, pb->buf_get, len); - memcpy(buf+len, pb->buf_buf, count - len); - pb->buf_get = pb->buf_buf + count - len; - } else { - memcpy(buf, pb->buf_get, count); - if (count < len) - pb->buf_get += count; - else /* count == len */ - pb->buf_get = pb->buf_buf; - } - - return count; - -} - -static int __init pl2303_init (void) +static int __init pl2303_init(void) { int retval; + retval = usb_serial_register(&pl2303_device); if (retval) goto failed_usb_serial_register; @@ -1187,14 +1157,12 @@ failed_usb_serial_register: return retval; } - -static void __exit pl2303_exit (void) +static void __exit pl2303_exit(void) { - usb_deregister (&pl2303_driver); - usb_serial_deregister (&pl2303_device); + usb_deregister(&pl2303_driver); + usb_serial_deregister(&pl2303_device); } - module_init(pl2303_init); module_exit(pl2303_exit); |