diff options
Diffstat (limited to 'drivers/usb/serial/pl2303.c')
| -rw-r--r-- | drivers/usb/serial/pl2303.c | 84 |
1 files changed, 69 insertions, 15 deletions
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 3e86815b270..9ec1a49e236 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -96,6 +96,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, + { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -527,6 +528,12 @@ static void pl2303_set_termios(struct tty_struct *tty, int baud; int i; u8 control; + const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600, + 4800, 7200, 9600, 14400, 19200, 28800, 38400, + 57600, 115200, 230400, 460800, 614400, + 921600, 1228800, 2457600, 3000000, 6000000 }; + int baud_floor, baud_ceil; + int k; dbg("%s - port %d", __func__, port->number); @@ -572,9 +579,39 @@ static void pl2303_set_termios(struct tty_struct *tty, dbg("%s - data bits = %d", __func__, buf[6]); } + /* For reference buf[0]:buf[3] baud rate value */ + /* NOTE: Only the values defined in baud_sup are supported ! + * => if unsupported values are set, the PL2303 seems to use + * 9600 baud (at least my PL2303X always does) + */ baud = tty_get_baud_rate(tty); - dbg("%s - baud = %d", __func__, baud); + dbg("%s - baud requested = %d", __func__, baud); if (baud) { + /* Set baudrate to nearest supported value */ + for (k=0; k<ARRAY_SIZE(baud_sup); k++) { + if (baud_sup[k] / baud) { + baud_ceil = baud_sup[k]; + if (k==0) { + baud = baud_ceil; + } else { + baud_floor = baud_sup[k-1]; + if ((baud_ceil % baud) + > (baud % baud_floor)) + baud = baud_floor; + else + baud = baud_ceil; + } + break; + } + } + if (baud > 1228800) { + /* type_0, type_1 only support up to 1228800 baud */ + if (priv->type != HX) + baud = 1228800; + else if (baud > 6000000) + baud = 6000000; + } + dbg("%s - baud set = %d", __func__, baud); buf[0] = baud & 0xff; buf[1] = (baud >> 8) & 0xff; buf[2] = (baud >> 16) & 0xff; @@ -585,8 +622,16 @@ static void pl2303_set_termios(struct tty_struct *tty, /* For reference buf[4]=1 is 1.5 stop bits */ /* For reference buf[4]=2 is 2 stop bits */ if (cflag & CSTOPB) { - buf[4] = 2; - dbg("%s - stop bits = 2", __func__); + /* NOTE: Comply with "real" UARTs / RS232: + * use 1.5 instead of 2 stop bits with 5 data bits + */ + if ((cflag & CSIZE) == CS5) { + buf[4] = 1; + dbg("%s - stop bits = 1.5", __func__); + } else { + buf[4] = 2; + dbg("%s - stop bits = 2", __func__); + } } else { buf[4] = 0; dbg("%s - stop bits = 1", __func__); @@ -599,11 +644,21 @@ static void pl2303_set_termios(struct tty_struct *tty, /* For reference buf[5]=3 is mark parity */ /* For reference buf[5]=4 is space parity */ if (cflag & PARODD) { - buf[5] = 1; - dbg("%s - parity = odd", __func__); + if (cflag & CMSPAR) { + buf[5] = 3; + dbg("%s - parity = mark", __func__); + } else { + buf[5] = 1; + dbg("%s - parity = odd", __func__); + } } else { - buf[5] = 2; - dbg("%s - parity = even", __func__); + if (cflag & CMSPAR) { + buf[5] = 4; + dbg("%s - parity = space", __func__); + } else { + buf[5] = 2; + dbg("%s - parity = even", __func__); + } } } else { buf[5] = 0; @@ -647,7 +702,7 @@ static void pl2303_set_termios(struct tty_struct *tty, pl2303_vendor_write(0x0, 0x0, serial); } - /* FIXME: Need to read back resulting baud rate */ + /* Save resulting baud rate */ if (baud) tty_encode_baud_rate(tty, baud, baud); @@ -691,8 +746,7 @@ static void pl2303_close(struct usb_serial_port *port) } -static int pl2303_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; @@ -714,8 +768,6 @@ static int pl2303_open(struct tty_struct *tty, if (tty) pl2303_set_termios(tty, port, &tmp_termios); - /* FIXME: need to assert RTS and DTR if CRTSCTS off */ - dbg("%s - submitting read urb", __func__); port->read_urb->dev = serial->dev; result = usb_submit_urb(port->read_urb, GFP_KERNEL); @@ -994,13 +1046,15 @@ static void pl2303_push_data(struct tty_struct *tty, /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); - if (port->console && port->sysrq) { + + if (tty_flag == TTY_NORMAL && !(port->console && port->sysrq)) + tty_insert_flip_string(tty, data, urb->actual_length); + else { int i; for (i = 0; i < urb->actual_length; ++i) if (!usb_serial_handle_sysrq_char(tty, port, data[i])) tty_insert_flip_char(tty, data[i], tty_flag); - } else - tty_insert_flip_string(tty, data, urb->actual_length); + } tty_flip_buffer_push(tty); } |