diff options
Diffstat (limited to 'drivers/usb/serial/quatech2.c')
| -rw-r--r-- | drivers/usb/serial/quatech2.c | 1155 |
1 files changed, 1155 insertions, 0 deletions
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c new file mode 100644 index 00000000000..8dd88ebe986 --- /dev/null +++ b/drivers/usb/serial/quatech2.c @@ -0,0 +1,1155 @@ +/* + * usb-serial driver for Quatech USB 2 devices + * + * Copyright (C) 2012 Bill Pemberton (wfp5p@virginia.edu) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * + * These devices all have only 1 bulk in and 1 bulk out that is shared + * for all serial ports. + * + */ + +#include <asm/unaligned.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial_reg.h> +#include <linux/uaccess.h> + +static bool debug; + +/* default urb timeout for usb operations */ +#define QT2_USB_TIMEOUT USB_CTRL_SET_TIMEOUT + +#define QT_OPEN_CLOSE_CHANNEL 0xca +#define QT_SET_GET_DEVICE 0xc2 +#define QT_SET_GET_REGISTER 0xc0 +#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc +#define QT_SET_ATF 0xcd +#define QT_TRANSFER_IN 0xc0 +#define QT_HW_FLOW_CONTROL_MASK 0xc5 +#define QT_SW_FLOW_CONTROL_MASK 0xc6 +#define QT2_BREAK_CONTROL 0xc8 +#define QT2_GET_SET_UART 0xc1 +#define QT2_FLUSH_DEVICE 0xc4 +#define QT2_GET_SET_QMCR 0xe1 +#define QT2_QMCR_RS232 0x40 +#define QT2_QMCR_RS422 0x10 + +#define SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS) + +#define SERIAL_EVEN_PARITY (UART_LCR_PARITY | UART_LCR_EPAR) + +/* status bytes for the device */ +#define QT2_CONTROL_BYTE 0x1b +#define QT2_LINE_STATUS 0x00 /* following 1 byte is line status */ +#define QT2_MODEM_STATUS 0x01 /* following 1 byte is modem status */ +#define QT2_XMIT_HOLD 0x02 /* following 2 bytes are ?? */ +#define QT2_CHANGE_PORT 0x03 /* following 1 byte is port to change to */ +#define QT2_REC_FLUSH 0x04 /* no following info */ +#define QT2_XMIT_FLUSH 0x05 /* no following info */ +#define QT2_CONTROL_ESCAPE 0xff /* pass through previous 2 control bytes */ + +#define MAX_BAUD_RATE 921600 +#define DEFAULT_BAUD_RATE 9600 + +#define QT2_WRITE_BUFFER_SIZE 512 /* size of write buffer */ +#define QT2_WRITE_CONTROL_SIZE 5 /* control bytes used for a write */ + +/* Version Information */ +#define DRIVER_VERSION "v0.1" +#define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver" + +#define USB_VENDOR_ID_QUATECH 0x061d +#define QUATECH_SSU2_100 0xC120 /* RS232 single port */ +#define QUATECH_DSU2_100 0xC140 /* RS232 dual port */ +#define QUATECH_DSU2_400 0xC150 /* RS232/422/485 dual port */ +#define QUATECH_QSU2_100 0xC160 /* RS232 four port */ +#define QUATECH_QSU2_400 0xC170 /* RS232/422/485 four port */ +#define QUATECH_ESU2_100 0xC1A0 /* RS232 eight port */ +#define QUATECH_ESU2_400 0xC180 /* RS232/422/485 eight port */ + +struct qt2_device_detail { + int product_id; + int num_ports; +}; + +#define QT_DETAILS(prod, ports) \ + .product_id = (prod), \ + .num_ports = (ports) + +static const struct qt2_device_detail qt2_device_details[] = { + {QT_DETAILS(QUATECH_SSU2_100, 1)}, + {QT_DETAILS(QUATECH_DSU2_400, 2)}, + {QT_DETAILS(QUATECH_DSU2_100, 2)}, + {QT_DETAILS(QUATECH_QSU2_400, 4)}, + {QT_DETAILS(QUATECH_QSU2_100, 4)}, + {QT_DETAILS(QUATECH_ESU2_400, 8)}, + {QT_DETAILS(QUATECH_ESU2_100, 8)}, + {QT_DETAILS(0, 0)} /* Terminating entry */ +}; + +static const struct usb_device_id id_table[] = { + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_400)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)}, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +struct qt2_serial_private { + unsigned char current_port; /* current port for incoming data */ + + struct urb *read_urb; /* shared among all ports */ + char read_buffer[512]; +}; + +struct qt2_port_private { + bool is_open; + u8 device_port; + + spinlock_t urb_lock; + bool urb_in_use; + struct urb *write_urb; + char write_buffer[QT2_WRITE_BUFFER_SIZE]; + + spinlock_t lock; + u8 shadowLSR; + u8 shadowMSR; + + wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ + struct async_icount icount; + + struct usb_serial_port *port; +}; + +static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch); +static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch); +static void qt2_write_bulk_callback(struct urb *urb); +static void qt2_read_bulk_callback(struct urb *urb); + +static void qt2_release(struct usb_serial *serial) +{ + int i; + + kfree(usb_get_serial_data(serial)); + + for (i = 0; i < serial->num_ports; i++) + kfree(usb_get_serial_port_data(serial->port[i])); +} + +static inline int calc_baud_divisor(int baudrate) +{ + int divisor, rem; + + divisor = MAX_BAUD_RATE / baudrate; + rem = MAX_BAUD_RATE % baudrate; + /* Round to nearest divisor */ + if (((rem * 2) >= baudrate) && (baudrate != 110)) + divisor++; + + return divisor; +} + +static inline int qt2_set_port_config(struct usb_device *dev, + unsigned char port_number, + u16 baudrate, u16 lcr) +{ + int divisor = calc_baud_divisor(baudrate); + u16 index = ((u16) (lcr << 8) | (u16) (port_number)); + + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + QT2_GET_SET_UART, 0x40, + divisor, index, NULL, 0, QT2_USB_TIMEOUT); +} + +static inline int qt2_control_msg(struct usb_device *dev, + u8 request, u16 data, u16 index) +{ + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + request, 0x40, data, index, + NULL, 0, QT2_USB_TIMEOUT); +} + +static inline int qt2_setdevice(struct usb_device *dev, u8 *data) +{ + u16 x = ((u16) (data[1] << 8) | (u16) (data[0])); + + return qt2_control_msg(dev, QT_SET_GET_DEVICE, x, 0); +} + + +static inline int qt2_getdevice(struct usb_device *dev, u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_DEVICE, 0xc0, 0, 0, + data, 3, QT2_USB_TIMEOUT); +} + +static inline int qt2_getregister(struct usb_device *dev, + u8 uart, + u8 reg, + u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0xc0, reg, + uart, data, sizeof(*data), QT2_USB_TIMEOUT); + +} + +static inline int qt2_setregister(struct usb_device *dev, + u8 uart, u8 reg, u16 data) +{ + u16 value = (data << 8) | reg; + + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0x40, value, uart, + NULL, 0, QT2_USB_TIMEOUT); +} + +static inline int update_mctrl(struct qt2_port_private *port_priv, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = port_priv->port; + struct usb_device *dev = port->serial->dev; + unsigned urb_value; + int status; + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { + dev_dbg(&port->dev, + "update_mctrl - DTR|RTS not being set|cleared\n"); + return 0; /* no change */ + } + + clear &= ~set; /* 'set' takes precedence over 'clear' */ + urb_value = 0; + if (set & TIOCM_DTR) + urb_value |= UART_MCR_DTR; + if (set & TIOCM_RTS) + urb_value |= UART_MCR_RTS; + + status = qt2_setregister(dev, port_priv->device_port, UART_MCR, + urb_value); + if (status < 0) + dev_err(&port->dev, + "update_mctrl - Error from MODEM_CTRL urb: %i\n", + status); + return status; +} + +static int qt2_calc_num_ports(struct usb_serial *serial) +{ + struct qt2_device_detail d; + int i; + + for (i = 0; d = qt2_device_details[i], d.product_id != 0; i++) { + if (d.product_id == le16_to_cpu(serial->dev->descriptor.idProduct)) + return d.num_ports; + } + + /* we didn't recognize the device */ + dev_err(&serial->dev->dev, + "don't know the number of ports, assuming 1\n"); + + return 1; +} + +static void qt2_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct usb_device *dev = port->serial->dev; + struct qt2_port_private *port_priv; + struct ktermios *termios = tty->termios; + u16 baud; + unsigned int cflag = termios->c_cflag; + u16 new_lcr = 0; + int status; + + port_priv = usb_get_serial_port_data(port); + + if (cflag & PARENB) { + if (cflag & PARODD) + new_lcr |= UART_LCR_PARITY; + else + new_lcr |= SERIAL_EVEN_PARITY; + } + + switch (cflag & CSIZE) { + case CS5: + new_lcr |= UART_LCR_WLEN5; + break; + case CS6: + new_lcr |= UART_LCR_WLEN6; + break; + case CS7: + new_lcr |= UART_LCR_WLEN7; + break; + default: + case CS8: + new_lcr |= UART_LCR_WLEN8; + break; + } + + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + + status = qt2_set_port_config(dev, port_priv->device_port, baud, + new_lcr); + if (status < 0) + dev_err(&port->dev, "%s - qt2_set_port_config failed: %i\n", + __func__, status); + + if (cflag & CRTSCTS) + status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + SERIAL_CRTSCTS, + port_priv->device_port); + else + status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + 0, port_priv->device_port); + if (status < 0) + dev_err(&port->dev, "%s - set HW flow control failed: %i\n", + __func__, status); + + if (I_IXOFF(tty) || I_IXON(tty)) { + u16 x = ((u16) (START_CHAR(tty) << 8) | (u16) (STOP_CHAR(tty))); + + status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + x, port_priv->device_port); + } else + status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + 0, port_priv->device_port); + + if (status < 0) + dev_err(&port->dev, "%s - set SW flow control failed: %i\n", + __func__, status); + +} + +static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct qt2_serial_private *serial_priv; + struct qt2_port_private *port_priv; + u8 *data; + u16 device_port; + int status; + unsigned long flags; + + device_port = (u16) (port->number - port->serial->minor); + + serial = port->serial; + + port_priv = usb_get_serial_port_data(port); + serial_priv = usb_get_serial_data(serial); + + /* set the port to RS232 mode */ + status = qt2_control_msg(serial->dev, QT2_GET_SET_QMCR, + QT2_QMCR_RS232, device_port); + if (status < 0) { + dev_err(&port->dev, + "%s failed to set RS232 mode for port %i error %i\n", + __func__, device_port, status); + return status; + } + + data = kzalloc(2, GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* open the port */ + status = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + QT_OPEN_CLOSE_CHANNEL, + 0xc0, 0, + device_port, data, 2, QT2_USB_TIMEOUT); + + if (status < 0) { + dev_err(&port->dev, "%s - open port failed %i", __func__, + status); + kfree(data); + return status; + } + + spin_lock_irqsave(&port_priv->lock, flags); + port_priv->shadowLSR = data[0]; + port_priv->shadowMSR = data[1]; + spin_unlock_irqrestore(&port_priv->lock, flags); + + kfree(data); + + /* set to default speed and 8bit word size */ + status = qt2_set_port_config(serial->dev, device_port, + DEFAULT_BAUD_RATE, UART_LCR_WLEN8); + if (status < 0) { + dev_err(&port->dev, + "%s - initial setup failed for port %i (%i)\n", + __func__, port->number, device_port); + return status; + } + + port_priv->is_open = true; + port_priv->device_port = (u8) device_port; + + if (tty) + qt2_set_termios(tty, port, tty->termios); + + return 0; + +} + +static void qt2_close(struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct qt2_serial_private *serial_priv; + struct qt2_port_private *port_priv; + unsigned long flags; + int i; + + serial = port->serial; + serial_priv = usb_get_serial_data(serial); + port_priv = usb_get_serial_port_data(port); + + port_priv->is_open = false; + + spin_lock_irqsave(&port_priv->urb_lock, flags); + if (port_priv->write_urb->status == -EINPROGRESS) + usb_kill_urb(port_priv->write_urb); + port_priv->urb_in_use = false; + spin_unlock_irqrestore(&port_priv->urb_lock, flags); + + /* flush the port transmit buffer */ + i = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + QT2_FLUSH_DEVICE, 0x40, 1, + port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); + + if (i < 0) + dev_err(&port->dev, "%s - transmit buffer flush failed: %i\n", + __func__, i); + + /* flush the port receive buffer */ + i = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + QT2_FLUSH_DEVICE, 0x40, 0, + port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); + + if (i < 0) + dev_err(&port->dev, "%s - receive buffer flush failed: %i\n", + __func__, i); + + /* close the port */ + i = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + QT_OPEN_CLOSE_CHANNEL, + 0x40, 0, + port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); + + if (i < 0) + dev_err(&port->dev, "%s - close port failed %i\n", + __func__, i); + +} + +static void qt2_disconnect(struct usb_serial *serial) +{ + struct qt2_serial_private *serial_priv = usb_get_serial_data(serial); + struct qt2_port_private *port_priv; + int i; + + if (serial_priv->read_urb->status == -EINPROGRESS) + usb_kill_urb(serial_priv->read_urb); + + usb_free_urb(serial_priv->read_urb); + + for (i = 0; i < serial->num_ports; i++) { + port_priv = usb_get_serial_port_data(serial->port[i]); + + if (port_priv->write_urb->status == -EINPROGRESS) + usb_kill_urb(port_priv->write_urb); + usb_free_urb(port_priv->write_urb); + } +} + +static int get_serial_info(struct usb_serial_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + tmp.line = port->serial->minor; + tmp.port = 0; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = port->bulk_out_size; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +{ + struct qt2_port_private *priv = usb_get_serial_port_data(port); + struct async_icount prev, cur; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + prev = priv->icount; + spin_unlock_irqrestore(&priv->lock, flags); + + while (1) { + wait_event_interruptible(priv->delta_msr_wait, + ((priv->icount.rng != prev.rng) || + (priv->icount.dsr != prev.dsr) || + (priv->icount.dcd != prev.dcd) || + (priv->icount.cts != prev.cts))); + + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&priv->lock, flags); + cur = priv->icount; + spin_unlock_irqrestore(&priv->lock, flags); + + if ((prev.rng == cur.rng) && + (prev.dsr == cur.dsr) && + (prev.dcd == cur.dcd) && + (prev.cts == cur.cts)) + return -EIO; + + if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) || + (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) || + (arg & TIOCM_CD && (prev.dcd != cur.dcd)) || + (arg & TIOCM_CTS && (prev.cts != cur.cts))) + return 0; + } + return 0; +} + +static int qt2_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct usb_serial_port *port = tty->driver_data; + struct qt2_port_private *priv = usb_get_serial_port_data(port); + struct async_icount cnow = priv->icount; + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +static int qt2_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(port, + (struct serial_struct __user *)arg); + + case TIOCMIWAIT: + return wait_modem_info(port, arg); + + default: + break; + } + + return -ENOIOCTLCMD; +} + +static void qt2_process_status(struct usb_serial_port *port, unsigned char *ch) +{ + switch (*ch) { + case QT2_LINE_STATUS: + qt2_update_lsr(port, ch + 1); + break; + case QT2_MODEM_STATUS: + qt2_update_msr(port, ch + 1); + break; + } +} + +/* not needed, kept to document functionality */ +static void qt2_process_xmit_empty(struct usb_serial_port *port, + unsigned char *ch) +{ + int bytes_written; + + bytes_written = (int)(*ch) + (int)(*(ch + 1) << 4); +} + +/* not needed, kept to document functionality */ +static void qt2_process_flush(struct usb_serial_port *port, unsigned char *ch) +{ + return; +} + +void qt2_process_read_urb(struct urb *urb) +{ + struct usb_serial *serial; + struct qt2_serial_private *serial_priv; + struct usb_serial_port *port; + struct qt2_port_private *port_priv; + struct tty_struct *tty; + bool escapeflag; + unsigned char *ch; + int i; + unsigned char newport; + int len = urb->actual_length; + + if (!len) + return; + + ch = urb->transfer_buffer; + tty = NULL; + serial = urb->context; + serial_priv = usb_get_serial_data(serial); + port = serial->port[serial_priv->current_port]; + port_priv = usb_get_serial_port_data(port); + + if (port_priv->is_open) + tty = tty_port_tty_get(&port->port); + + for (i = 0; i < urb->actual_length; i++) { + ch = (unsigned char *)urb->transfer_buffer + i; + if ((i <= (len - 3)) && + (*ch == QT2_CONTROL_BYTE) && + (*(ch + 1) == QT2_CONTROL_BYTE)) { + escapeflag = false; + switch (*(ch + 2)) { + case QT2_LINE_STATUS: + case QT2_MODEM_STATUS: + if (i > (len - 4)) { + dev_warn(&port->dev, + "%s - status message too short\n", + __func__); + break; + } + qt2_process_status(port, ch + 2); + i += 3; + escapeflag = true; + break; + case QT2_XMIT_HOLD: + if (i > (len - 5)) { + dev_warn(&port->dev, + "%s - xmit_empty message too short\n", + __func__); + break; + } + qt2_process_xmit_empty(port, ch + 3); + i += 4; + escapeflag = true; + break; + case QT2_CHANGE_PORT: + if (i > (len - 4)) { + dev_warn(&port->dev, + "%s - change_port message too short\n", + __func__); + break; + } + if (tty) { + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } + + newport = *(ch + 3); + + if (newport > serial->num_ports) { + dev_err(&port->dev, + "%s - port change to invalid port: %i\n", + __func__, newport); + break; + } + + serial_priv->current_port = newport; + port = serial->port[serial_priv->current_port]; + port_priv = usb_get_serial_port_data(port); + if (port_priv->is_open) + tty = tty_port_tty_get(&port->port); + else + tty = NULL; + i += 3; + escapeflag = true; + break; + case QT2_REC_FLUSH: + case QT2_XMIT_FLUSH: + qt2_process_flush(port, ch + 2); + i += 2; + escapeflag = true; + break; + case QT2_CONTROL_ESCAPE: + tty_buffer_request_room(tty, 2); + tty_insert_flip_string(tty, ch, 2); + i += 2; + escapeflag = true; + break; + default: + dev_warn(&port->dev, + "%s - unsupported command %i\n", + __func__, *(ch + 2)); + break; + } + if (escapeflag) + continue; + } + + if (tty) { + tty_buffer_request_room(tty, 1); + tty_insert_flip_string(tty, ch, 1); + } + } + + if (tty) { + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } +} + +static void qt2_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct qt2_port_private *port_priv; + + port = urb->context; + port_priv = usb_get_serial_port_data(port); + + spin_lock(&port_priv->urb_lock); + + port_priv->urb_in_use = false; + usb_serial_port_softint(port); + + spin_unlock(&port_priv->urb_lock); + +} + +static void qt2_read_bulk_callback(struct urb *urb) +{ + struct usb_serial *serial = urb->context; + int status; + + if (urb->status) { + dev_warn(&serial->dev->dev, + "%s - non-zero urb status: %i\n", __func__, + urb->status); + return; + } + + qt2_process_read_urb(urb); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status != 0) + dev_err(&serial->dev->dev, + "%s - resubmit read urb failed: %i\n", + __func__, status); +} + +static int qt2_setup_urbs(struct usb_serial *serial) +{ + struct usb_serial_port *port; + struct usb_serial_port *port0; + struct qt2_serial_private *serial_priv; + struct qt2_port_private *port_priv; + int pcount, status; + + port0 = serial->port[0]; + + serial_priv = usb_get_serial_data(serial); + serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!serial_priv->read_urb) { + dev_err(&serial->dev->dev, "No free urbs available\n"); + return -ENOMEM; + } + + usb_fill_bulk_urb(serial_priv->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port0->bulk_in_endpointAddress), + serial_priv->read_buffer, + sizeof(serial_priv->read_buffer), + qt2_read_bulk_callback, serial); + + /* setup write_urb for each port */ + for (pcount = 0; pcount < serial->num_ports; pcount++) { + + port = serial->port[pcount]; + port_priv = usb_get_serial_port_data(port); + + port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!port_priv->write_urb) { + dev_err(&serial->dev->dev, + "failed to alloc write_urb for port %i\n", + pcount); + return -ENOMEM; + } + + usb_fill_bulk_urb(port_priv->write_urb, + serial->dev, + usb_sndbulkpipe(serial->dev, + port0-> + bulk_out_endpointAddress), + port_priv->write_buffer, + sizeof(port_priv->write_buffer), + qt2_write_bulk_callback, port); + } + + status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL); + if (status != 0) { + dev_err(&serial->dev->dev, + "%s - submit read urb failed %i\n", __func__, status); + return status; + } + + return 0; + +} + +static int qt2_attach(struct usb_serial *serial) +{ + struct qt2_serial_private *serial_priv; + struct qt2_port_private *port_priv; + int status, pcount; + + /* power on unit */ + status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0xc2, 0x40, 0x8000, 0, NULL, 0, + QT2_USB_TIMEOUT); + if (status < 0) { + dev_err(&serial->dev->dev, + "%s - failed to power on unit: %i\n", __func__, status); + return status; + } + + serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); + if (!serial_priv) { + dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + return -ENOMEM; + } + + usb_set_serial_data(serial, serial_priv); + + for (pcount = 0; pcount < serial->num_ports; pcount++) { + port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); + if (!port_priv) { + dev_err(&serial->dev->dev, + "%s- kmalloc(%Zd) failed.\n", __func__, + sizeof(*port_priv)); + pcount--; + status = -ENOMEM; + goto attach_failed; + } + + spin_lock_init(&port_priv->lock); + spin_lock_init(&port_priv->urb_lock); + init_waitqueue_head(&port_priv->delta_msr_wait); + + port_priv->port = serial->port[pcount]; + + usb_set_serial_port_data(serial->port[pcount], port_priv); + } + + status = qt2_setup_urbs(serial); + if (status != 0) + goto attach_failed; + + return 0; + +attach_failed: + for (/* empty */; pcount >= 0; pcount--) { + port_priv = usb_get_serial_port_data(serial->port[pcount]); + kfree(port_priv); + } + kfree(serial_priv); + return status; +} + +static int qt2_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_device *dev = port->serial->dev; + struct qt2_port_private *port_priv = usb_get_serial_port_data(port); + u8 *d; + int r; + + d = kzalloc(2, GFP_KERNEL); + if (!d) + return -ENOMEM; + + r = qt2_getregister(dev, port_priv->device_port, UART_MCR, d); + if (r < 0) + goto mget_out; + + r = qt2_getregister(dev, port_priv->device_port, UART_MSR, d + 1); + if (r < 0) + goto mget_out; + + r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) | + (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) | + (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) | + (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) | + (d[1] & UART_MSR_RI ? TIOCM_RI : 0) | + (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0); + +mget_out: + kfree(d); + return r; +} + +static int qt2_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct qt2_port_private *port_priv; + + port_priv = usb_get_serial_port_data(tty->driver_data); + return update_mctrl(port_priv, set, clear); +} + +static void qt2_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct qt2_port_private *port_priv; + int status; + u16 val; + + port_priv = usb_get_serial_port_data(port); + + if (!port_priv->is_open) { + dev_err(&port->dev, + "%s - port is not open\n", __func__); + return; + } + + val = (break_state == -1) ? 1 : 0; + + status = qt2_control_msg(port->serial->dev, QT2_BREAK_CONTROL, + val, port_priv->device_port); + if (status < 0) + dev_warn(&port->dev, + "%s - failed to send control message: %i\n", __func__, + status); +} + + + +static void qt2_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_device *dev = port->serial->dev; + struct qt2_port_private *port_priv = usb_get_serial_port_data(port); + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* Disable flow control */ + if (!on && qt2_setregister(dev, port_priv->device_port, + UART_MCR, 0) < 0) + dev_warn(&port->dev, "error from flowcontrol urb\n"); + /* drop RTS and DTR */ + if (on) + update_mctrl(port_priv, TIOCM_DTR | TIOCM_RTS, 0); + else + update_mctrl(port_priv, 0, TIOCM_DTR | TIOCM_RTS); + } + mutex_unlock(&port->serial->disc_mutex); +} + +static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch) +{ + struct qt2_port_private *port_priv; + u8 newMSR = (u8) *ch; + unsigned long flags; + + port_priv = usb_get_serial_port_data(port); + + spin_lock_irqsave(&port_priv->lock, flags); + port_priv->shadowMSR = newMSR; + spin_unlock_irqrestore(&port_priv->lock, flags); + + if (newMSR & UART_MSR_ANY_DELTA) { + /* update input line counters */ + if (newMSR & UART_MSR_DCTS) + port_priv->icount.cts++; + + if (newMSR & UART_MSR_DDSR) + port_priv->icount.dsr++; + + if (newMSR & UART_MSR_DDCD) + port_priv->icount.dcd++; + + if (newMSR & UART_MSR_TERI) + port_priv->icount.rng++; + + wake_up_interruptible(&port_priv->delta_msr_wait); + } +} + +static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch) +{ + struct qt2_port_private *port_priv; + struct async_icount *icount; + unsigned long flags; + u8 newLSR = (u8) *ch; + + port_priv = usb_get_serial_port_data(port); + + if (newLSR & UART_LSR_BI) + newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI); + + spin_lock_irqsave(&port_priv->lock, flags); + port_priv->shadowLSR = newLSR; + spin_unlock_irqrestore(&port_priv->lock, flags); + + icount = &port_priv->icount; + + if (newLSR & UART_LSR_BRK_ERROR_BITS) { + + if (newLSR & UART_LSR_BI) + icount->brk++; + + if (newLSR & UART_LSR_OE) + icount->overrun++; + + if (newLSR & UART_LSR_PE) + icount->parity++; + + if (newLSR & UART_LSR_FE) + icount->frame++; + } + +} + +static int qt2_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct qt2_port_private *port_priv; + unsigned long flags = 0; + int r; + + port_priv = usb_get_serial_port_data(port); + + spin_lock_irqsave(&port_priv->urb_lock, flags); + + if (port_priv->urb_in_use) + r = 0; + else + r = QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE; + + spin_unlock_irqrestore(&port_priv->urb_lock, flags); + + return r; +} + +static int qt2_write(struct tty_struct *tty, + struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct qt2_port_private *port_priv; + struct urb *write_urb; + unsigned char *data; + unsigned long flags; + int status; + int bytes_out = 0; + + port_priv = usb_get_serial_port_data(port); + + if (port_priv->write_urb == NULL) { + dev_err(&port->dev, "%s - no output urb\n", __func__); + return 0; + } + write_urb = port_priv->write_urb; + + count = min(count, QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE); + + data = write_urb->transfer_buffer; + spin_lock_irqsave(&port_priv->urb_lock, flags); + if (port_priv->urb_in_use == true) { + printk(KERN_INFO "qt2_write - urb is in use\n"); + goto write_out; + } + + *data++ = QT2_CONTROL_BYTE; + *data++ = QT2_CONTROL_BYTE; + *data++ = port_priv->device_port; + put_unaligned_le16(count, data); + data += 2; + memcpy(data, buf, count); + + write_urb->transfer_buffer_length = count + QT2_WRITE_CONTROL_SIZE; + + status = usb_submit_urb(write_urb, GFP_ATOMIC); + if (status == 0) { + port_priv->urb_in_use = true; + bytes_out += count; + } + +write_out: + spin_unlock_irqrestore(&port_priv->urb_lock, flags); + return bytes_out; +} + + +static struct usb_serial_driver qt2_device = { + .driver = { + .owner = THIS_MODULE, + .name = "quatech-serial", + }, + .description = DRIVER_DESC, + .id_table = id_table, + .open = qt2_open, + .close = qt2_close, + .write = qt2_write, + .write_room = qt2_write_room, + .calc_num_ports = qt2_calc_num_ports, + .attach = qt2_attach, + .release = qt2_release, + .disconnect = qt2_disconnect, + .dtr_rts = qt2_dtr_rts, + .break_ctl = qt2_break_ctl, + .tiocmget = qt2_tiocmget, + .tiocmset = qt2_tiocmset, + .get_icount = qt2_get_icount, + .ioctl = qt2_ioctl, + .set_termios = qt2_set_termios, +}; + +static struct usb_serial_driver *const serial_drivers[] = { + &qt2_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); |