summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/spcp8x5.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/spcp8x5.c')
-rw-r--r--drivers/usb/serial/spcp8x5.c69
1 files changed, 37 insertions, 32 deletions
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 55b2570b8b8..58495f5cca1 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -448,7 +448,8 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
/* close the serial port. We should wait for data sending to device 1st and
* then kill all urb. */
-static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
+static void spcp8x5_close(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
@@ -464,7 +465,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
spin_lock_irqsave(&priv->lock, flags);
timeout = SPCP8x5_CLOSING_WAIT;
init_waitqueue_entry(&wait, current);
- add_wait_queue(&port->tty->write_wait, &wait);
+ add_wait_queue(&tty->write_wait, &wait);
for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
if (ringbuf_avail_data(priv->buf) == 0 ||
@@ -475,7 +476,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
spin_lock_irqsave(&priv->lock, flags);
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->tty->write_wait, &wait);
+ remove_wait_queue(&tty->write_wait, &wait);
/* clear out any remaining data in the buffer */
clear_ringbuf(priv->buf);
@@ -486,7 +487,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
* flow control for data rates of 1200 bps or more, for lower rates we
* should really know how much data is in the buffer to compute a delay
* that is not unnecessarily long) */
- bps = tty_get_baud_rate(port->tty);
+ bps = tty_get_baud_rate(tty);
if (bps > 1200)
timeout = max((HZ*2560) / bps, HZ/10);
else
@@ -495,8 +496,8 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
schedule_timeout(timeout);
/* clear control lines */
- if (port->tty) {
- c_cflag = port->tty->termios->c_cflag;
+ if (tty) {
+ c_cflag = tty->termios->c_cflag;
if (c_cflag & HUPCL) {
spin_lock_irqsave(&priv->lock, flags);
priv->line_control = 0;
@@ -518,14 +519,14 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
}
/* set the serial param for transfer. we should check if we really need to
- * transfer. then if be set flow contorl we should do this too. */
-static void spcp8x5_set_termios(struct usb_serial_port *port,
- struct ktermios *old_termios)
+ * transfer. if we set flow control we should do this too. */
+static void spcp8x5_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int cflag = port->tty->termios->c_cflag;
+ unsigned int cflag = tty->termios->c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned short uartdata;
unsigned char buf[2] = {0, 0};
@@ -533,21 +534,19 @@ static void spcp8x5_set_termios(struct usb_serial_port *port,
int i;
u8 control;
- if ((!port->tty) || (!port->tty->termios))
- return;
-
/* for the 1st time call this function */
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
- *(port->tty->termios) = tty_std_termios;
- port->tty->termios->c_cflag = B115200 | CS8 | CREAD |
- HUPCL | CLOCAL;
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_ispeed = 115200;
+ tty->termios->c_ospeed = 115200;
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
/* check that they really want us to change something */
- if (!tty_termios_hw_change(port->tty->termios, old_termios))
+ if (!tty_termios_hw_change(tty->termios, old_termios))
return;
/* set DTR/RTS active */
@@ -567,7 +566,7 @@ static void spcp8x5_set_termios(struct usb_serial_port *port,
}
/* Set Baud Rate */
- baud = tty_get_baud_rate(port->tty);;
+ baud = tty_get_baud_rate(tty);;
switch (baud) {
case 300: buf[0] = 0x00; break;
case 600: buf[0] = 0x01; break;
@@ -643,7 +642,8 @@ static void spcp8x5_set_termios(struct usb_serial_port *port,
/* open the serial port. do some usb system call. set termios and get the line
* status of the device. then submit the read urb */
-static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
+static int spcp8x5_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp)
{
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
@@ -665,7 +665,7 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
return ret;
spin_lock_irqsave(&priv->lock, flags);
- if (port->tty->termios->c_cflag & CBAUD)
+ if (tty && (tty->termios->c_cflag & CBAUD))
priv->line_control = MCR_DTR | MCR_RTS;
else
priv->line_control = 0;
@@ -674,8 +674,8 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
/* Setup termios */
- if (port->tty)
- spcp8x5_set_termios(port, &tmp_termios);
+ if (tty)
+ spcp8x5_set_termios(tty, port, &tmp_termios);
spcp8x5_get_msr(serial->dev, &status, priv->type);
@@ -690,7 +690,7 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
port->read_urb->dev = serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (ret) {
- spcp8x5_close(port, NULL);
+ spcp8x5_close(tty, port, NULL);
return -EPROTO;
}
return 0;
@@ -717,7 +717,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
/* check the urb status */
if (urb->status) {
- if (!port->open_count)
+ if (!port->port.count)
return;
if (urb->status == -EPROTO) {
/* spcp8x5 mysteriously fails with -EPROTO */
@@ -755,7 +755,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
tty_flag = TTY_FRAME;
dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
- tty = port->tty;
+ tty = port->port.tty;
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
@@ -767,7 +767,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
}
/* Schedule the next read _if_ we are still open */
- if (port->open_count) {
+ if (port->port.count) {
urb->dev = port->serial->dev;
result = usb_submit_urb(urb , GFP_ATOMIC);
if (result)
@@ -866,7 +866,7 @@ static void spcp8x5_write_bulk_callback(struct urb *urb)
}
/* write data to ring buffer. and then start the write transfer */
-static int spcp8x5_write(struct usb_serial_port *port,
+static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
@@ -925,9 +925,10 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
return 0;
}
-static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file,
+static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
switch (cmd) {
@@ -943,9 +944,10 @@ static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file,
return -ENOIOCTLCMD;
}
-static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file,
+static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
+ struct usb_serial_port *port = tty->driver_data;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
@@ -965,8 +967,9 @@ static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file,
return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
}
-static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file)
+static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
{
+ struct usb_serial_port *port = tty->driver_data;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int mcr;
@@ -989,8 +992,9 @@ static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file)
}
/* get the avail space room in ring buffer */
-static int spcp8x5_write_room(struct usb_serial_port *port)
+static int spcp8x5_write_room(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
int room = 0;
unsigned long flags;
@@ -1003,8 +1007,9 @@ static int spcp8x5_write_room(struct usb_serial_port *port)
}
/* get the number of avail data in write ring buffer */
-static int spcp8x5_chars_in_buffer(struct usb_serial_port *port)
+static int spcp8x5_chars_in_buffer(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-30 19:10:10 +0000