diff options
Diffstat (limited to 'drivers/usb/serial/usb-serial.c')
-rw-r--r-- | drivers/usb/serial/usb-serial.c | 198 |
1 files changed, 54 insertions, 144 deletions
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 2138ba8aeb6..0cb0d77dc42 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -81,7 +81,7 @@ static struct usb_serial *get_free_serial (struct usb_serial *serial, int num_po unsigned int i, j; int good_spot; - dbg("%s %d", __FUNCTION__, num_ports); + dbg("%s %d", __func__, num_ports); *minor = 0; mutex_lock(&table_lock); @@ -101,7 +101,7 @@ static struct usb_serial *get_free_serial (struct usb_serial *serial, int num_po *minor = i; j = 0; - dbg("%s - minor base = %d", __FUNCTION__, *minor); + dbg("%s - minor base = %d", __func__, *minor); for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) { serial_table[i] = serial; serial->port[j++]->number = i; @@ -117,7 +117,7 @@ static void return_serial(struct usb_serial *serial) { int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); if (serial == NULL) return; @@ -135,7 +135,7 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); - dbg("%s - %s", __FUNCTION__, serial->type->description); + dbg("%s - %s", __func__, serial->type->description); serial->type->shutdown(serial); @@ -187,7 +187,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) unsigned int portNumber; int retval; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* get the serial object associated with this tty pointer */ serial = usb_serial_get_by_index(tty->index); @@ -259,7 +259,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp) if (!port) return; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); mutex_lock(&port->mutex); @@ -296,16 +296,14 @@ static int serial_write (struct tty_struct * tty, const unsigned char *buf, int struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; - if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED) + if (port->serial->dev->state == USB_STATE_NOTATTACHED) goto exit; - dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count); + dbg("%s - port %d, %d byte(s)", __func__, port->number, count); - if (!port->open_count) { - retval = -EINVAL; - dbg("%s - port not opened", __FUNCTION__); - goto exit; - } + /* open_count is managed under the mutex lock for the tty so cannot + drop to zero until after the last close completes */ + WARN_ON(!port->open_count); /* pass on to the driver specific version of this function */ retval = port->serial->type->write(port, buf, count); @@ -317,61 +315,28 @@ exit: static int serial_write_room (struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - int retval = -ENODEV; - - if (!port) - goto exit; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); - goto exit; - } - + dbg("%s - port %d", __func__, port->number); + WARN_ON(!port->open_count); /* pass on to the driver specific version of this function */ - retval = port->serial->type->write_room(port); - -exit: - return retval; + return port->serial->type->write_room(port); } static int serial_chars_in_buffer (struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - int retval = -ENODEV; - - if (!port) - goto exit; - - dbg("%s = port %d", __FUNCTION__, port->number); - - if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); - goto exit; - } + dbg("%s = port %d", __func__, port->number); + WARN_ON(!port->open_count); /* pass on to the driver specific version of this function */ - retval = port->serial->type->chars_in_buffer(port); - -exit: - return retval; + return port->serial->type->chars_in_buffer(port); } static void serial_throttle (struct tty_struct * tty) { struct usb_serial_port *port = tty->driver_data; + dbg("%s - port %d", __func__, port->number); - if (!port) - return; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (!port->open_count) { - dbg ("%s - port not open", __FUNCTION__); - return; - } - + WARN_ON(!port->open_count); /* pass on to the driver specific version of this function */ if (port->serial->type->throttle) port->serial->type->throttle(port); @@ -380,17 +345,9 @@ static void serial_throttle (struct tty_struct * tty) static void serial_unthrottle (struct tty_struct * tty) { struct usb_serial_port *port = tty->driver_data; + dbg("%s - port %d", __func__, port->number); - if (!port) - return; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); - return; - } - + WARN_ON(!port->open_count); /* pass on to the driver specific version of this function */ if (port->serial->type->unthrottle) port->serial->type->unthrottle(port); @@ -401,40 +358,27 @@ static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned in struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; - if (!port) - goto exit; - - dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); + dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); - if (!port->open_count) { - dbg ("%s - port not open", __FUNCTION__); - goto exit; - } + WARN_ON(!port->open_count); /* pass on to the driver specific version of this function if it is available */ - if (port->serial->type->ioctl) + if (port->serial->type->ioctl) { + lock_kernel(); retval = port->serial->type->ioctl(port, file, cmd, arg); + unlock_kernel(); + } else retval = -ENOIOCTLCMD; - -exit: return retval; } static void serial_set_termios (struct tty_struct *tty, struct ktermios * old) { struct usb_serial_port *port = tty->driver_data; + dbg("%s - port %d", __func__, port->number); - if (!port) - return; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); - return; - } - + WARN_ON(!port->open_count); /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->set_termios) port->serial->type->set_termios(port, old); @@ -446,19 +390,15 @@ static void serial_break (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - if (!port) - return; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); - return; - } + dbg("%s - port %d", __func__, port->number); + WARN_ON(!port->open_count); /* pass on to the driver specific version of this function if it is available */ - if (port->serial->type->break_ctl) + if (port->serial->type->break_ctl) { + lock_kernel(); port->serial->type->break_ctl(port, break_state); + unlock_kernel(); + } } static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data) @@ -469,7 +409,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int off_t begin = 0; char tmp[40]; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); length += sprintf (page, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { serial = usb_serial_get_by_index(i); @@ -512,19 +452,11 @@ static int serial_tiocmget (struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; - if (!port) - return -ENODEV; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); - return -ENODEV; - } + dbg("%s - port %d", __func__, port->number); + WARN_ON(!port->open_count); if (port->serial->type->tiocmget) return port->serial->type->tiocmget(port, file); - return -EINVAL; } @@ -533,19 +465,11 @@ static int serial_tiocmset (struct tty_struct *tty, struct file *file, { struct usb_serial_port *port = tty->driver_data; - if (!port) - return -ENODEV; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (!port->open_count) { - dbg("%s - port not open", __FUNCTION__); - return -ENODEV; - } + dbg("%s - port %d", __func__, port->number); + WARN_ON(!port->open_count); if (port->serial->type->tiocmset) return port->serial->type->tiocmset(port, file, set, clear); - return -EINVAL; } @@ -565,7 +489,7 @@ static void usb_serial_port_work(struct work_struct *work) container_of(work, struct usb_serial_port, work); struct tty_struct *tty; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port) return; @@ -581,7 +505,7 @@ static void port_release(struct device *dev) { struct usb_serial_port *port = to_usb_serial_port(dev); - dbg ("%s - %s", __FUNCTION__, dev->bus_id); + dbg ("%s - %s", __func__, dev->bus_id); port_free(port); } @@ -627,7 +551,7 @@ static struct usb_serial * create_serial (struct usb_device *dev, serial = kzalloc(sizeof(*serial), GFP_KERNEL); if (!serial) { - dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&dev->dev, "%s - out of memory\n", __func__); return NULL; } serial->dev = usb_get_dev(dev); @@ -722,7 +646,7 @@ int usb_serial_probe(struct usb_interface *interface, serial = create_serial (dev, interface, type); if (!serial) { unlock_kernel(); - dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__); + dev_err(&interface->dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -854,22 +778,6 @@ int usb_serial_probe(struct usb_interface *interface, serial->num_interrupt_in = num_interrupt_in; serial->num_interrupt_out = num_interrupt_out; -#if 0 - /* check that the device meets the driver's requirements */ - if ((type->num_interrupt_in != NUM_DONT_CARE && - type->num_interrupt_in != num_interrupt_in) - || (type->num_interrupt_out != NUM_DONT_CARE && - type->num_interrupt_out != num_interrupt_out) - || (type->num_bulk_in != NUM_DONT_CARE && - type->num_bulk_in != num_bulk_in) - || (type->num_bulk_out != NUM_DONT_CARE && - type->num_bulk_out != num_bulk_out)) { - dbg("wrong number of endpoints"); - kfree(serial); - return -EIO; - } -#endif - /* found all that we need */ dev_info(&interface->dev, "%s converter detected\n", type->description); @@ -883,7 +791,7 @@ int usb_serial_probe(struct usb_interface *interface, serial->num_port_pointers = max_endpoints; unlock_kernel(); - dbg("%s - setting up %d port structures for this device", __FUNCTION__, max_endpoints); + dbg("%s - setting up %d port structures for this device", __func__, max_endpoints); for (i = 0; i < max_endpoints; ++i) { port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL); if (!port) @@ -1031,7 +939,7 @@ int usb_serial_probe(struct usb_interface *interface, port->dev.release = &port_release; snprintf (&port->dev.bus_id[0], sizeof(port->dev.bus_id), "ttyUSB%d", port->number); - dbg ("%s - registering %s", __FUNCTION__, port->dev.bus_id); + dbg ("%s - registering %s", __func__, port->dev.bus_id); retval = device_register(&port->dev); if (retval) dev_err(&port->dev, "Error registering port device, " @@ -1090,7 +998,7 @@ void usb_serial_disconnect(struct usb_interface *interface) struct usb_serial_port *port; usb_serial_console_disconnect(serial); - dbg ("%s", __FUNCTION__); + dbg ("%s", __func__); mutex_lock(&serial->disc_mutex); usb_set_intfdata (interface, NULL); @@ -1174,7 +1082,7 @@ static int __init usb_serial_init(void) result = bus_register(&usb_serial_bus_type); if (result) { - err("%s - registering bus driver failed", __FUNCTION__); + err("%s - registering bus driver failed", __func__); goto exit_bus; } @@ -1188,24 +1096,26 @@ static int __init usb_serial_init(void) usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; usb_serial_tty_driver->init_termios = tty_std_termios; usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + usb_serial_tty_driver->init_termios.c_ispeed = 9600; + usb_serial_tty_driver->init_termios.c_ospeed = 9600; tty_set_operations(usb_serial_tty_driver, &serial_ops); result = tty_register_driver(usb_serial_tty_driver); if (result) { - err("%s - tty_register_driver failed", __FUNCTION__); + err("%s - tty_register_driver failed", __func__); goto exit_reg_driver; } /* register the USB driver */ result = usb_register(&usb_serial_driver); if (result < 0) { - err("%s - usb_register failed", __FUNCTION__); + err("%s - usb_register failed", __func__); goto exit_tty; } /* register the generic driver, if we should */ result = usb_serial_generic_register(debug); if (result < 0) { - err("%s - registering generic driver failed", __FUNCTION__); + err("%s - registering generic driver failed", __func__); goto exit_generic; } @@ -1223,7 +1133,7 @@ exit_reg_driver: bus_unregister(&usb_serial_bus_type); exit_bus: - err ("%s - returning with error %d", __FUNCTION__, result); + err ("%s - returning with error %d", __func__, result); put_tty_driver(usb_serial_tty_driver); return result; } |