diff options
Diffstat (limited to 'drivers/usb/serial/whiteheat.c')
-rw-r--r-- | drivers/usb/serial/whiteheat.c | 135 |
1 files changed, 30 insertions, 105 deletions
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b36077de72b..346c7efc20b 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -32,12 +32,9 @@ #include <linux/serial_reg.h> #include <linux/serial.h> #include <linux/usb/serial.h> -#include <linux/firmware.h> -#include <linux/ihex.h> +#include <linux/usb/ezusb.h> #include "whiteheat.h" /* WhiteHEAT specific commands */ -static bool debug; - #ifndef CMSPAR #define CMSPAR 0 #endif @@ -195,84 +192,15 @@ static int firm_report_tx_done(struct usb_serial_port *port); static int whiteheat_firmware_download(struct usb_serial *serial, const struct usb_device_id *id) { - int response, ret = -ENOENT; - const struct firmware *loader_fw = NULL, *firmware_fw = NULL; - const struct ihex_binrec *record; + int response; - if (request_ihex_firmware(&firmware_fw, "whiteheat.fw", - &serial->dev->dev)) { - dev_err(&serial->dev->dev, - "%s - request \"whiteheat.fw\" failed\n", __func__); - goto out; - } - if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw", - &serial->dev->dev)) { - dev_err(&serial->dev->dev, - "%s - request \"whiteheat_loader.fw\" failed\n", - __func__); - goto out; + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); + if (response >= 0) { + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); + if (response >= 0) + return 0; } - ret = 0; - response = ezusb_set_reset (serial, 1); - - record = (const struct ihex_binrec *)loader_fw->data; - while (record) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for loader (%d %04X %p %d)\n", - __func__, response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); - break; - } - record = ihex_next_binrec(record); - } - - response = ezusb_set_reset(serial, 0); - - record = (const struct ihex_binrec *)firmware_fw->data; - while (record && be32_to_cpu(record->addr) < 0x1b40) - record = ihex_next_binrec(record); - while (record) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa3); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for first firmware step " - "(%d %04X %p %d)\n", __func__, response, - be32_to_cpu(record->addr), record->data, - be16_to_cpu(record->len)); - break; - } - ++record; - } - - response = ezusb_set_reset(serial, 1); - - record = (const struct ihex_binrec *)firmware_fw->data; - while (record && be32_to_cpu(record->addr) < 0x1b40) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for second firmware step " - "(%d %04X %p %d)\n", __func__, response, - be32_to_cpu(record->addr), record->data, - be16_to_cpu(record->len)); - break; - } - ++record; - } - ret = 0; - response = ezusb_set_reset (serial, 0); - out: - release_firmware(loader_fw); - release_firmware(firmware_fw); - return ret; + return -ENOENT; } @@ -533,7 +461,7 @@ static int whiteheat_ioctl(struct tty_struct *tty, struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd 0x%.4x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -580,7 +508,7 @@ static void command_port_write_callback(struct urb *urb) int status = urb->status; if (status) { - dbg("nonzero urb status: %d", status); + dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); return; } } @@ -596,19 +524,18 @@ static void command_port_read_callback(struct urb *urb) command_info = usb_get_serial_port_data(command_port); if (!command_info) { - dbg("%s - command_info is NULL, exiting.", __func__); + dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); return; } if (status) { - dbg("%s - nonzero urb status: %d", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); if (status != -ENOENT) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); return; } - usb_serial_debug_data(debug, &command_port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; @@ -619,19 +546,19 @@ static void command_port_read_callback(struct urb *urb) } else if (data[0] == WHITEHEAT_EVENT) { /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ - dbg("%s - event received", __func__); + dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); } else - dbg("%s - bad reply from firmware", __func__); + dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); /* Continue trying to always read */ result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); if (result) - dbg("%s - failed resubmitting read urb, error %d", + dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); } @@ -645,11 +572,12 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; struct whiteheat_private *info; + struct device *dev = &port->dev; __u8 *transfer_buffer; int retval = 0; int t; - dbg("%s - command %d", __func__, command); + dev_dbg(dev, "%s - command %d\n", __func__, command); command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); @@ -662,7 +590,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, command_port->write_urb->transfer_buffer_length = datasize + 1; retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); if (retval) { - dbg("%s - submit urb failed", __func__); + dev_dbg(dev, "%s - submit urb failed\n", __func__); goto exit; } @@ -673,19 +601,19 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, usb_kill_urb(command_port->write_urb); if (command_info->command_finished == false) { - dbg("%s - command timed out.", __func__); + dev_dbg(dev, "%s - command timed out.\n", __func__); retval = -ETIMEDOUT; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { - dbg("%s - command failed.", __func__); + dev_dbg(dev, "%s - command failed.\n", __func__); retval = -EIO; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { - dbg("%s - command completed.", __func__); + dev_dbg(dev, "%s - command completed.\n", __func__); switch (command) { case WHITEHEAT_GET_DTR_RTS: info = usb_get_serial_port_data(port); @@ -723,6 +651,7 @@ static int firm_close(struct usb_serial_port *port) static void firm_setup_port(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; @@ -736,7 +665,7 @@ static void firm_setup_port(struct tty_struct *tty) default: case CS8: port_settings.bits = 8; break; } - dbg("%s - data bits = %d", __func__, port_settings.bits); + dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); /* determine the parity */ if (cflag & PARENB) @@ -752,14 +681,14 @@ static void firm_setup_port(struct tty_struct *tty) port_settings.parity = WHITEHEAT_PAR_EVEN; else port_settings.parity = WHITEHEAT_PAR_NONE; - dbg("%s - parity = %c", __func__, port_settings.parity); + dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); /* figure out the stop bits requested */ if (cflag & CSTOPB) port_settings.stop = 2; else port_settings.stop = 1; - dbg("%s - stop bits = %d", __func__, port_settings.stop); + dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); /* figure out the flow control settings */ if (cflag & CRTSCTS) @@ -767,7 +696,7 @@ static void firm_setup_port(struct tty_struct *tty) WHITEHEAT_HFLOW_RTS); else port_settings.hflow = WHITEHEAT_HFLOW_NONE; - dbg("%s - hardware flow control = %s %s %s %s", __func__, + dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", @@ -778,16 +707,15 @@ static void firm_setup_port(struct tty_struct *tty) port_settings.sflow = WHITEHEAT_SFLOW_RXTX; else port_settings.sflow = WHITEHEAT_SFLOW_NONE; - dbg("%s - software flow control = %c", __func__, port_settings.sflow); + dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); port_settings.xon = START_CHAR(tty); port_settings.xoff = STOP_CHAR(tty); - dbg("%s - XON = %2x, XOFF = %2x", - __func__, port_settings.xon, port_settings.xoff); + dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ port_settings.baud = tty_get_baud_rate(tty); - dbg("%s - baud rate = %d", __func__, port_settings.baud); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); /* fixme: should set validated settings */ tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); @@ -918,6 +846,3 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE("whiteheat.fw"); MODULE_FIRMWARE("whiteheat_loader.fw"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); |