diff options
Diffstat (limited to 'drivers/usb/serial')
28 files changed, 2632 insertions, 234 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 5076b9d9705..2f4d303ee36 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -54,10 +54,10 @@ config USB_SERIAL_GENERIC properly. config USB_SERIAL_AIRCABLE - tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)" + tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL help - Say Y here if you want to use AIRcable USB Bluetoot Dongle. + Say Y here if you want to use USB AIRcable Bluetooth Dongle. To compile this driver as a module, choose M here: the module will be called aircable. @@ -422,6 +422,16 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. +config USB_SERIAL_MOS7720 + tristate "USB Moschip 7720 Single Port Serial Driver" + depends on USB_SERIAL + ---help--- + Say Y here if you want to use a USB Serial single port adapter from + Moschip Semiconductor Tech. + + To compile this driver as a module, choose M here: the + module will be called mos7720. + config USB_SERIAL_MOS7840 tristate "USB Moschip 7840/7820 USB Serial Driver" depends on USB_SERIAL @@ -527,8 +537,7 @@ config USB_SERIAL_OPTION The USB bus on these cards is not accessible externally. Supported devices include (some of?) those made by: - Option, Huawei, Audiovox, Sierra Wireless, Novatel Wireless, or - Anydata. + Option, Huawei, Audiovox, Novatel Wireless, or Anydata. To compile this driver as a module, choose M here: the module will be called option. @@ -545,6 +554,17 @@ config USB_SERIAL_OMNINET To compile this driver as a module, choose M here: the module will be called omninet. +config USB_SERIAL_DEBUG + tristate "USB Debugging Device" + depends on USB_SERIAL + help + Say Y here if you have a USB debugging device used to recieve + debugging data from another machine. The most common of these + devices is the NetChip TurboCONNECT device. + + To compile this driver as a module, choose M here: the + module will be called usb-debug. + config USB_EZUSB bool depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 8dce83340e3..61166ad450e 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o +obj-$(CONFIG_USB_SERIAL_DEBUG) += usb_debug.o obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT) += digi_acceleport.o obj-$(CONFIG_USB_SERIAL_EDGEPORT) += io_edgeport.o obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o @@ -34,6 +35,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o +obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 81227550913..b1b5707bc99 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -270,8 +270,11 @@ static void aircable_read(void *params) */ tty = port->tty; - if (!tty) + if (!tty) { schedule_work(&priv->rx_work); + err("%s - No tty available", __FUNCTION__); + return ; + } count = min(64, serial_buf_data_avail(priv->rx_buf)); @@ -305,9 +308,7 @@ static int aircable_probe(struct usb_serial *serial, for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { endpoint = &iface_desc->endpoint[i].desc; - if (((endpoint->bEndpointAddress & 0x80) == 0x00) && - ((endpoint->bmAttributes & 3) == 0x02)) { - /* we found our bulk out endpoint */ + if (usb_endpoint_is_bulk_out(endpoint)) { dbg("found bulk out on endpoint %d", i); ++num_bulk_out; } diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 2c19f19b255..96c73726d74 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -18,12 +18,9 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ - { USB_DEVICE(0x0f3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */ - { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ - { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ - { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */ - { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */ + { USB_DEVICE(0x1410, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */ + { USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); @@ -133,6 +130,7 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp) } urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { + kfree(buffer); dev_err(&port->dev, "%s - no more urbs?\n", __FUNCTION__); result = -ENOMEM; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index ca52f12f0e2..863966c1c5a 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -85,10 +85,9 @@ static int ark3116_attach(struct usb_serial *serial) int i; for (i = 0; i < serial->num_ports; ++i) { - priv = kmalloc(sizeof (struct ark3116_private), GFP_KERNEL); + priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL); if (!priv) goto cleanup; - memset(priv, 0x00, sizeof (struct ark3116_private)); spin_lock_init(&priv->lock); usb_set_serial_port_data(serial->port[i], priv); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 3a9073dbfe6..7167728d764 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -166,19 +166,17 @@ static int usb_console_setup(struct console *co, char *options) if (serial->type->set_termios) { /* build up a fake tty structure so that the open call has something * to look at to get the cflag value */ - tty = kmalloc (sizeof (*tty), GFP_KERNEL); + tty = kzalloc(sizeof(*tty), GFP_KERNEL); if (!tty) { err ("no more memory"); return -ENOMEM; } - termios = kmalloc (sizeof (*termios), GFP_KERNEL); + termios = kzalloc(sizeof(*termios), GFP_KERNEL); if (!termios) { err ("no more memory"); kfree (tty); return -ENOMEM; } - memset (tty, 0x00, sizeof(*tty)); - memset (termios, 0x00, sizeof(*termios)); termios->c_cflag = cflag; tty->termios = termios; port->tty = tty; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 486c7411b9a..f95d42c0d16 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -64,7 +64,11 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ + { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ + { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ + { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index f2e89a08365..093f303b318 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -1684,15 +1684,14 @@ static int __init cypress_init(void) info(DRIVER_DESC " " DRIVER_VERSION); return 0; + failed_usb_register: - usb_deregister(&cypress_driver); -failed_ca42v2_register: usb_serial_deregister(&cypress_ca42v2_device); -failed_hidcom_register: +failed_ca42v2_register: usb_serial_deregister(&cypress_hidcom_device); -failed_em_register: +failed_hidcom_register: usb_serial_deregister(&cypress_earthmate_device); - +failed_em_register: return retval; } diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index bdb58100fc1..5e3ac281a2f 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -157,7 +157,7 @@ * to TASK_RUNNING will be lost and write_chan's subsequent call to * schedule() will never return (unless it catches a signal). * This race condition occurs because write_bulk_callback() (and thus -* the wakeup) are called asynchonously from an interrupt, rather than +* the wakeup) are called asynchronously from an interrupt, rather than * from the scheduler. We can avoid the race by calling the wakeup * from the scheduler queue and that's our fix: Now, at the end of * write_bulk_callback() we queue up a wakeup call on the scheduler diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index 5169c2d154a..97ee718b1da 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -31,12 +31,11 @@ int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *da return -ENODEV; } - transfer_buffer = kmalloc (length, GFP_KERNEL); + transfer_buffer = kmemdup(data, length, GFP_KERNEL); if (!transfer_buffer) { dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, length); return -ENOMEM; } - memcpy (transfer_buffer, data, length); result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000); kfree (transfer_buffer); return result; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d3dc1a15ec6..89ce2775be1 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1,16 +1,16 @@ /* * USB FTDI SIO driver * - * Copyright (C) 1999 - 2001 - * Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 1999 - 2001 + * Greg Kroah-Hartman (greg@kroah.com) * Bill Ryder (bryder@sgi.com) * Copyright (C) 2002 * Kuba Ober (kuba@mareimbrium.org) * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * * See Documentation/usb/usb-serial.txt for more information on using this driver * @@ -32,7 +32,7 @@ * Changed full name of USB-UIRT device to avoid "/" character. * Added FTDI's alternate PID (0x6006) for FT232/245 devices. * Added PID for "ELV USB Module UO100" from Stefan Frings. - * + * * (21/Oct/2003) Ian Abbott * Renamed some VID/PID macros for Matrix Orbital and Perle Systems * devices. Removed Matrix Orbital and Perle Systems devices from the @@ -69,7 +69,7 @@ * does not incure any measurable overhead. This also relies on the fact * that we have proper reference counting logic for urbs. I nicked this * from Greg KH's Visor driver. - * + * * (23/Jun/2003) Ian Abbott * Reduced flip buffer pushes and corrected a data length test in * ftdi_read_bulk_callback. @@ -77,7 +77,7 @@ * * (21/Jun/2003) Erik Nygren * Added support for Home Electronics Tira-1 IR transceiver using FT232BM chip. - * See <http://www.home-electro.com/tira1.htm>. Only operates properly + * See <http://www.home-electro.com/tira1.htm>. Only operates properly * at 100000 and RTS-CTS, so set custom divisor mode on startup. * Also force the Tira-1 and USB-UIRT to only use their custom baud rates. * @@ -137,17 +137,17 @@ * (17/Feb/2003) Bill Ryder * Added write urb buffer pool on a per device basis * Added more checking for open file on callbacks (fixed OOPS) - * Added CrystalFontz 632 and 634 PIDs + * Added CrystalFontz 632 and 634 PIDs * (thanx to CrystalFontz for the sample devices - they flushed out * some driver bugs) * Minor debugging message changes * Added throttle, unthrottle and chars_in_buffer functions * Fixed FTDI_SIO (the original device) bug * Fixed some shutdown handling - * - * - * - * + * + * + * + * * (07/Jun/2002) Kuba Ober * Changed FTDI_SIO_BASE_BAUD_TO_DIVISOR macro into ftdi_baud_to_divisor * function. It was getting too complex. @@ -158,7 +158,7 @@ * * (25/Jul/2002) Bill Ryder inserted Dmitri's TIOCMIWAIT patch * Not tested by me but it doesn't break anything I use. - * + * * (04/Jan/2002) Kuba Ober * Implemented 38400 baudrate kludge, where it can be substituted with other * values. That's the only way to set custom baudrates. @@ -179,7 +179,7 @@ * (the previous version caused panics) * Removed port iteration code since the device only has one I/O port and it * was wrong anyway. - * + * * (31/May/2001) gkh * Switched from using spinlock to a semaphore, which fixes lots of problems. * @@ -188,16 +188,16 @@ * Cleaned up comments for 8U232 * Added parity, framing and overrun error handling * Added receive break handling. - * + * * (04/08/2001) gb * Identify version on module load. - * + * * (18/March/2001) Bill Ryder * (Not released) * Added send break handling. (requires kernel patch too) * Fixed 8U232AM hardware RTS/CTS etc status reporting. * Added flipbuf fix copied from generic device - * + * * (12/3/2000) Bill Ryder * Added support for 8U232AM device. * Moved PID and VIDs into header file only. @@ -211,14 +211,14 @@ * Cleaned up comments. Removed multiple PID/VID definitions. * Factorised cts/dtr code * Made use of __FUNCTION__ in dbg's - * + * * (11/01/2000) Adam J. Richter * usb_device_id table support - * + * * (10/05/2000) gkh * Fixed bug with urb->dev not being set properly, now that the usb * core needs it. - * + * * (09/11/2000) gkh * Removed DEBUG #ifdefs with call to usb_serial_debug_data * @@ -226,11 +226,11 @@ * Added module_init and module_exit functions to handle the fact that this * driver is a loadable module now. * - * (04/04/2000) Bill Ryder + * (04/04/2000) Bill Ryder * Fixed bugs in TCGET/TCSET ioctls (by removing them - they are * handled elsewhere in the tty io driver chain). * - * (03/30/2000) Bill Ryder + * (03/30/2000) Bill Ryder * Implemented lots of ioctls * Fixed a race condition in write * Changed some dbg's to errs @@ -311,6 +311,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) }, { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, @@ -444,13 +445,13 @@ static struct usb_device_id id_table_combined [] = { /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, */ - { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, - { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, - { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, - { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) }, - { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, + { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, + { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) }, { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, @@ -511,6 +512,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) }, + { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -522,7 +524,7 @@ static struct usb_driver ftdi_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, - .no_dynamic_id = 1, + .no_dynamic_id = 1, }; static const char *ftdi_chip_name[] = { @@ -548,13 +550,13 @@ struct ftdi_private { int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */ __u16 last_set_data_urb_value ; /* the last data state set - needed for doing a break */ - int write_offset; /* This is the offset in the usb data block to write the serial data - + int write_offset; /* This is the offset in the usb data block to write the serial data - * it is different between devices */ int flags; /* some ASYNC_xxxx flags are supported */ unsigned long last_dtr_rts; /* saved modem control outputs */ wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ - char prev_status, diff_status; /* Used for TIOCMIWAIT */ + char prev_status, diff_status; /* Used for TIOCMIWAIT */ __u8 rx_flags; /* receive state flags (throttling) */ spinlock_t rx_lock; /* spinlock for receive state */ struct work_struct rx_work; @@ -721,7 +723,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned urb_value |= FTDI_SIO_SET_RTS_HIGH; rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_MODEM_CTRL_REQUEST, + FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, urb_value, priv->interface, buf, 0, WDR_TIMEOUT); @@ -768,7 +770,7 @@ static int change_speed(struct usb_serial_port *port) if (priv->interface) { /* FT2232C */ urb_index = (__u16)((urb_index << 8) | priv->interface); } - + rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_BAUDRATE_REQUEST, @@ -827,7 +829,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) /* 3. Convert baudrate to device-specific divisor */ - if (!baud) baud = 9600; + if (!baud) baud = 9600; switch(priv->chip_type) { case SIO: /* SIO chip */ switch(baud) { @@ -843,7 +845,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) case 115200: div_value = ftdi_sio_b115200; break; } /* baud */ if (div_value == 0) { - dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud); + dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud); div_value = ftdi_sio_b9600; div_okay = 0; } @@ -925,7 +927,7 @@ static int set_serial_info(struct usb_serial_port * port, struct serial_struct _ /* Make the changes - these are privileged changes! */ priv->flags = ((priv->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); + (new_serial.flags & ASYNC_FLAGS)); priv->custom_divisor = new_serial.custom_divisor; port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; @@ -950,7 +952,7 @@ check_and_exit: (old_priv.custom_divisor != priv->custom_divisor))) { change_speed(port); } - + return (0); } /* set_serial_info */ @@ -1022,18 +1024,18 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a struct usb_device *udev; unsigned short latency = 0; int rv = 0; - + udev = to_usb_device(dev); - + dbg("%s",__FUNCTION__); - + rv = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), FTDI_SIO_GET_LATENCY_TIMER_REQUEST, FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, - 0, priv->interface, + 0, priv->interface, (char*) &latency, 1, WDR_TIMEOUT); - + if (rv < 0) { dev_err(dev, "Unable to read latency timer: %i", rv); return -EIO; @@ -1051,23 +1053,23 @@ static ssize_t store_latency_timer(struct device *dev, struct device_attribute * char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - + udev = to_usb_device(dev); - + dbg("%s: setting latency timer = %i", __FUNCTION__, v); - + rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_LATENCY_TIMER_REQUEST, FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - v, priv->interface, + v, priv->interface, buf, 0, WDR_TIMEOUT); - + if (rv < 0) { dev_err(dev, "Unable to write latency timer: %i", rv); return -EIO; } - + return count; } @@ -1082,23 +1084,23 @@ static ssize_t store_event_char(struct device *dev, struct device_attribute *att char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - + udev = to_usb_device(dev); - + dbg("%s: setting event char = %i", __FUNCTION__, v); - + rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_EVENT_CHAR_REQUEST, FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, - v, priv->interface, + v, priv->interface, buf, 0, WDR_TIMEOUT); - + if (rv < 0) { dbg("Unable to write event character: %i", rv); return -EIO; } - + return count; } @@ -1135,11 +1137,11 @@ static void remove_sysfs_attrs(struct usb_serial *serial) struct ftdi_private *priv; struct usb_device *udev; - dbg("%s",__FUNCTION__); + dbg("%s",__FUNCTION__); priv = usb_get_serial_port_data(serial->port[0]); udev = serial->dev; - + /* XXX see create_sysfs_attrs */ if (priv->chip_type != SIO) { device_remove_file(&udev->dev, &dev_attr_event_char); @@ -1147,7 +1149,7 @@ static void remove_sysfs_attrs(struct usb_serial *serial) device_remove_file(&udev->dev, &dev_attr_latency_timer); } } - + } /* @@ -1258,7 +1260,7 @@ static void ftdi_HE_TIRA1_setup (struct usb_serial *serial) } /* ftdi_HE_TIRA1_setup */ -/* ftdi_shutdown is called from usbserial:usb_serial_disconnect +/* ftdi_shutdown is called from usbserial:usb_serial_disconnect * it is called when the usb device is disconnected * * usbserial:usb_serial_disconnect @@ -1269,16 +1271,16 @@ static void ftdi_HE_TIRA1_setup (struct usb_serial *serial) static void ftdi_shutdown (struct usb_serial *serial) { /* ftdi_shutdown */ - + struct usb_serial_port *port = serial->port[0]; struct ftdi_private *priv = usb_get_serial_port_data(port); dbg("%s", __FUNCTION__); remove_sysfs_attrs(serial); - - /* all open ports are closed at this point - * (by usbserial.c:__serial_close, which calls ftdi_close) + + /* all open ports are closed at this point + * (by usbserial.c:__serial_close, which calls ftdi_close) */ if (priv) { @@ -1293,7 +1295,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned long flags; - + int result = 0; char buf[1]; /* Needed for the usb_control_msg I think */ @@ -1312,8 +1314,8 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, - FTDI_SIO_RESET_SIO, + FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, + FTDI_SIO_RESET_SIO, priv->interface, buf, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change @@ -1350,12 +1352,12 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) -/* +/* * usbserial:__serial_close only calls ftdi_close if the point is open * * This only gets called when it is the last close - * - * + * + * */ static void ftdi_close (struct usb_serial_port *port, struct file *filp) @@ -1368,14 +1370,14 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) if (c_cflag & HUPCL){ /* Disable flow control */ - if (usb_control_msg(port->serial->dev, + if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { err("error from flowcontrol urb"); - } + } /* drop RTS and DTR */ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); @@ -1384,14 +1386,13 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) /* cancel any scheduled reading */ cancel_delayed_work(&priv->rx_work); flush_scheduled_work(); - + /* shutdown our bulk read */ - if (port->read_urb) - usb_kill_urb(port->read_urb); + usb_kill_urb(port->read_urb); } /* ftdi_close */ - + /* The SIO requires the first byte to have: * B0 1 * B1 0 @@ -1423,7 +1424,7 @@ static int ftdi_write (struct usb_serial_port *port, return 0; } spin_unlock_irqrestore(&priv->tx_lock, flags); - + data_offset = priv->write_offset; dbg("data_offset set to %d",data_offset); @@ -1462,7 +1463,7 @@ static int ftdi_write (struct usb_serial_port *port, user_pktsz = todo; } /* Write the control byte at the front of the packet*/ - *first_byte = 1 | ((user_pktsz) << 2); + *first_byte = 1 | ((user_pktsz) << 2); /* Copy data for packet */ memcpy (first_byte + data_offset, current_position, user_pktsz); @@ -1479,7 +1480,7 @@ static int ftdi_write (struct usb_serial_port *port, usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer); /* fill the buffer and send it */ - usb_fill_bulk_urb(urb, port->serial->dev, + usb_fill_bulk_urb(urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), buffer, transfer_size, ftdi_write_bulk_callback, port); @@ -1520,7 +1521,7 @@ static void ftdi_write_bulk_callback (struct urb *urb) kfree (urb->transfer_buffer); dbg("%s - port %d", __FUNCTION__, port->number); - + if (urb->status) { dbg("nonzero write bulk status received: %d", urb->status); return; @@ -1651,7 +1652,7 @@ static void ftdi_process_read (void *param) struct tty_struct *tty; struct ftdi_private *priv; char error_flag; - unsigned char *data; + unsigned char *data; int i; int result; @@ -1759,7 +1760,7 @@ static void ftdi_process_read (void *param) } if (length > 0) { for (i = 2; i < length+2; i++) { - /* Note that the error flag is duplicated for + /* Note that the error flag is duplicated for every character received since we don't know which character it applied to */ tty_insert_flip_char(tty, data[packet_offset+i], error_flag); @@ -1773,7 +1774,7 @@ static void ftdi_process_read (void *param) This doesn't work well since the application receives a never ending stream of bad data - even though new data hasn't been sent. Therefore I (bill) have taken this out. - However - this might make sense for framing errors and so on + However - this might make sense for framing errors and so on so I am leaving the code in for now. */ else { @@ -1827,7 +1828,7 @@ static void ftdi_process_read (void *param) /* if the port is closed stop trying to read */ if (port->open_count > 0){ /* Continue trying to always read */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, ftdi_read_bulk_callback, port); @@ -1844,9 +1845,9 @@ static void ftdi_process_read (void *param) static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) { struct ftdi_private *priv = usb_get_serial_port_data(port); - __u16 urb_value = 0; + __u16 urb_value = 0; char buf[1]; - + /* break_state = -1 to turn on break, and 0 to turn off break */ /* see drivers/char/tty_io.c to see it used */ /* last_set_data_urb_value NEVER has the break bit set in it */ @@ -1854,20 +1855,20 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) if (break_state) { urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK; } else { - urb_value = priv->last_set_data_urb_value; + urb_value = priv->last_set_data_urb_value; } - + if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_DATA_REQUEST, + FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_TIMEOUT) < 0) { err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state); - } + } dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value); - + } @@ -1883,12 +1884,12 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ struct ftdi_private *priv = usb_get_serial_port_data(port); __u16 urb_value; /* will hold the new flags */ char buf[1]; /* Perhaps I should dynamically alloc this? */ - + // Added for xon/xoff support unsigned int iflag = port->tty->termios->c_iflag; unsigned char vstop; unsigned char vstart; - + dbg("%s", __FUNCTION__); /* Force baud rate if this device requires it, unless it is set to B0. */ @@ -1906,20 +1907,20 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ cflag = port->tty->termios->c_cflag; - /* FIXME -For this cut I don't care if the line is really changing or - not - so just do the change regardless - should be able to + /* FIXME -For this cut I don't care if the line is really changing or + not - so just do the change regardless - should be able to compare old_termios and tty->termios */ - /* NOTE These routines can get interrupted by - ftdi_sio_read_bulk_callback - need to examine what this + /* NOTE These routines can get interrupted by + ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ - + /* Set number of data bits, parity, stop bits */ - + urb_value = 0; urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : FTDI_SIO_SET_DATA_STOP_BITS_1); - urb_value |= (cflag & PARENB ? - (cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD : + urb_value |= (cflag & PARENB ? + (cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD : FTDI_SIO_SET_DATA_PARITY_EVEN) : FTDI_SIO_SET_DATA_PARITY_NONE); if (cflag & CSIZE) { @@ -1936,25 +1937,25 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ /* This is needed by the break command since it uses the same command - but is * or'ed with this value */ priv->last_set_data_urb_value = urb_value; - + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_DATA_REQUEST, + FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, buf, 0, WDR_SHORT_TIMEOUT) < 0) { err("%s FAILED to set databits/stopbits/parity", __FUNCTION__); - } + } /* Now do the baudrate */ if ((cflag & CBAUD) == B0 ) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, + 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { err("%s error from disable flowcontrol urb", __FUNCTION__); - } + } /* Drop RTS and DTR */ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } else { @@ -1972,16 +1973,16 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ if (cflag & CRTSCTS) { dbg("%s Setting to CRTSCTS flow control", __FUNCTION__); - if (usb_control_msg(dev, + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), buf, 0, WDR_TIMEOUT) < 0) { err("urb failed to set to rts/cts flow control"); - } - - } else { + } + + } else { /* * Xon/Xoff code * @@ -2011,16 +2012,16 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_ /* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */ /* CHECKME Assuming XON/XOFF handled by tty stack - not by device */ dbg("%s Turning off hardware flow control", __FUNCTION__); - if (usb_control_msg(dev, + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, + 0, priv->interface, buf, 0, WDR_TIMEOUT) < 0) { err("urb failed to clear flow control"); - } + } } - + } return; } /* ftdi_termios */ @@ -2036,11 +2037,11 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) switch (priv->chip_type) { case SIO: /* Request the status from the device */ - if ((ret = usb_control_msg(port->serial->dev, + if ((ret = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST, FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, 0, + 0, 0, buf, 1, WDR_TIMEOUT)) < 0 ) { err("%s Could not get modem status of device - err: %d", __FUNCTION__, ret); @@ -2052,11 +2053,11 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) case FT2232C: /* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same format as the data returned from the in point */ - if ((ret = usb_control_msg(port->serial->dev, + if ((ret = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST, FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, priv->interface, + 0, priv->interface, buf, 2, WDR_TIMEOUT)) < 0 ) { err("%s Could not get modem status of device - err: %d", __FUNCTION__, ret); @@ -2067,12 +2068,12 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) return -EFAULT; break; } - + return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | - priv->last_dtr_rts; + priv->last_dtr_rts; } static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear) @@ -2138,11 +2139,11 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne break; default: break; - + } - /* This is not necessarily an error - turns out the higher layers will do + /* This is not necessarily an error - turns out the higher layers will do * some ioctls itself (see comment above) */ dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd); @@ -2199,7 +2200,7 @@ static int __init ftdi_init (void) if (retval) goto failed_sio_register; retval = usb_register(&ftdi_driver); - if (retval) + if (retval) goto failed_usb_register; info(DRIVER_VERSION ":" DRIVER_DESC); diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index f0edb87d2dd..bae117d359a 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -55,6 +55,9 @@ /* iPlus device */ #define FTDI_IPLUS_PID 0xD070 /* Product Id */ +/* DMX4ALL DMX Interfaces */ +#define FTDI_DMX4ALL 0xC850 + /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ /* they use the ftdi chipset for the USB interface and the vendor id is the same */ #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ @@ -175,9 +178,15 @@ #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ /* + * FTDI USB UART chips used in construction projects from the + * Elektor Electronics magazine (http://elektor-electronics.co.uk) + */ +#define ELEKTOR_VID 0x0C7D +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ + +/* * DSS-20 Sync Station for Sony Ericsson P800 */ - #define FTDI_DSS20_PID 0xFC82 /* diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 4543152a996..6530d391ebe 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1523,12 +1523,11 @@ static int garmin_attach (struct usb_serial *serial) dbg("%s", __FUNCTION__); - garmin_data_p = kmalloc (sizeof(struct garmin_data), GFP_KERNEL); + garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); if (garmin_data_p == NULL) { dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__); return -ENOMEM; } - memset (garmin_data_p, 0, sizeof(struct garmin_data)); init_timer(&garmin_data_p->timer); spin_lock_init(&garmin_data_p->lock); INIT_LIST_HEAD(&garmin_data_p->pktlist); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 91bd3014ef1..d06547a13f2 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1038,9 +1038,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) edge_port->open = FALSE; edge_port->openPending = FALSE; - if (edge_port->write_urb) { - usb_kill_urb(edge_port->write_urb); - } + usb_kill_urb(edge_port->write_urb); if (edge_port->write_urb) { /* if this urb had a transfer buffer already (old transfer) free it */ diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 6238aff1e77..d72cf8bc7f7 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -320,6 +320,7 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ { USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */ + { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC USB Modem */ { USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A03) }, /* PocketPC USB Sync */ diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 2a4bb66691a..d3b9a351cef 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -206,10 +206,9 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) dbg("%s", __FUNCTION__); - buf_flow_init = kmalloc(16, GFP_KERNEL); + buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); if (!buf_flow_init) return -ENOMEM; - memcpy(buf_flow_init, buf_flow_static, 16); if (port->tty) port->tty->low_latency = 1; diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 53be824eb1b..7639652cec4 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -2306,22 +2306,16 @@ static void keyspan_shutdown (struct usb_serial *serial) } /* Now free them */ - if (s_priv->instat_urb) - usb_free_urb(s_priv->instat_urb); - if (s_priv->glocont_urb) - usb_free_urb(s_priv->glocont_urb); + usb_free_urb(s_priv->instat_urb); + usb_free_urb(s_priv->glocont_urb); for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; p_priv = usb_get_serial_port_data(port); - if (p_priv->inack_urb) - usb_free_urb(p_priv->inack_urb); - if (p_priv->outcont_urb) - usb_free_urb(p_priv->outcont_urb); + usb_free_urb(p_priv->inack_urb); + usb_free_urb(p_priv->outcont_urb); for (j = 0; j < 2; j++) { - if (p_priv->in_urbs[j]) - usb_free_urb(p_priv->in_urbs[j]); - if (p_priv->out_urbs[j]) - usb_free_urb(p_priv->out_urbs[j]); + usb_free_urb(p_priv->in_urbs[j]); + usb_free_urb(p_priv->out_urbs[j]); } } diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index ff03331e0bc..237289920f0 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -185,13 +185,11 @@ static int kobil_startup (struct usb_serial *serial) for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { endpoint = &altsetting->endpoint[i]; - if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && - ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + if (usb_endpoint_is_int_out(&endpoint->desc)) { dbg("%s Found interrupt out endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress); priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress; } - if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && - ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + if (usb_endpoint_is_int_in(&endpoint->desc)) { dbg("%s Found interrupt in endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress); priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress; } @@ -355,8 +353,7 @@ static void kobil_close (struct usb_serial_port *port, struct file *filp) usb_free_urb( port->write_urb ); port->write_urb = NULL; } - if (port->interrupt_in_urb) - usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); } diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index b7582cc496d..a906e500a02 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -358,10 +358,8 @@ static int mct_u232_startup (struct usb_serial *serial) /* Puh, that's dirty */ port = serial->port[0]; rport = serial->port[1]; - if (port->read_urb) { - /* No unlinking, it wasn't submitted yet. */ - usb_free_urb(port->read_urb); - } + /* No unlinking, it wasn't submitted yet. */ + usb_free_urb(port->read_urb); port->read_urb = rport->interrupt_in_urb; rport->interrupt_in_urb = NULL; port->read_urb->context = port; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c new file mode 100644 index 00000000000..82cd15b894b --- /dev/null +++ b/drivers/usb/serial/mos7720.c @@ -0,0 +1,1683 @@ +/* + * mos7720.c + * Controls the Moschip 7720 usb to dual port serial convertor + * + * Copyright 2006 Moschip Semiconductor Tech. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * Developed by: + * VijayaKumar.G.N. <vijaykumar@aspirecom.net> + * AjayKumar <ajay@aspirecom.net> + * Gurudeva.N. <gurudev@aspirecom.net> + * + * Cleaned up from the original by: + * Greg Kroah-Hartman <gregkh@suse.de> + * + * Originally based on drivers/usb/serial/io_edgeport.c which is: + * Copyright (C) 2000 Inside Out Networks, All rights reserved. + * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/serial.h> +#include <linux/serial_reg.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <asm/uaccess.h> + + +/* + * Version Information + */ +#define DRIVER_VERSION "1.0.0.4F" +#define DRIVER_AUTHOR "Aspire Communications pvt Ltd." +#define DRIVER_DESC "Moschip USB Serial Driver" + +/* default urb timeout */ +#define MOS_WDR_TIMEOUT (HZ * 5) + +#define MOS_PORT1 0x0200 +#define MOS_PORT2 0x0300 +#define MOS_VENREG 0x0000 +#define MOS_MAX_PORT 0x02 +#define MOS_WRITE 0x0E +#define MOS_READ 0x0D + +/* Interrupt Rotinue Defines */ +#define SERIAL_IIR_RLS 0x06 +#define SERIAL_IIR_RDA 0x04 +#define SERIAL_IIR_CTI 0x0c +#define SERIAL_IIR_THR 0x02 +#define SERIAL_IIR_MS 0x00 + +#define NUM_URBS 16 /* URB Count */ +#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ + +/* This structure holds all of the local port information */ +struct moschip_port +{ + __u8 shadowLCR; /* last LCR value received */ + __u8 shadowMCR; /* last MCR value received */ + __u8 shadowMSR; /* last MSR value received */ + char open; + struct async_icount icount; + struct usb_serial_port *port; /* loop back to the owner */ + struct urb *write_urb_pool[NUM_URBS]; +}; + +/* This structure holds all of the individual serial device information */ +struct moschip_serial +{ + int interrupt_started; +}; + +static int debug; + +#define USB_VENDOR_ID_MOSCHIP 0x9710 +#define MOSCHIP_DEVICE_ID_7720 0x7720 +#define MOSCHIP_DEVICE_ID_7715 0x7715 + +static struct usb_device_id moschip_port_id_table [] = { + { USB_DEVICE(USB_VENDOR_ID_MOSCHIP,MOSCHIP_DEVICE_ID_7720) }, + { } /* terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, moschip_port_id_table); + + +/* + * mos7720_interrupt_callback + * this is the callback function for when we have received data on the + * interrupt endpoint. + */ +static void mos7720_interrupt_callback(struct urb *urb) +{ + int result; + int length; + __u32 *data; + unsigned int status; + __u8 sp1; + __u8 sp2; + __u8 st; + + dbg("%s"," : Entering\n"); + + if (!urb) { + dbg("%s","Invalid Pointer !!!!:\n"); + return; + } + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, + urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, + urb->status); + goto exit; + } + + length = urb->actual_length; + data = urb->transfer_buffer; + + /* Moschip get 4 bytes + * Byte 1 IIR Port 1 (port.number is 0) + * Byte 2 IIR Port 2 (port.number is 1) + * Byte 3 -------------- + * Byte 4 FIFO status for both */ + if (length && length > 4) { + dbg("Wrong data !!!"); + return; + } + + status = *data; + + sp1 = (status & 0xff000000)>>24; + sp2 = (status & 0x00ff0000)>>16; + st = status & 0x000000ff; + + if ((sp1 & 0x01) || (sp2 & 0x01)) { + /* No Interrupt Pending in both the ports */ + dbg("No Interrupt !!!"); + } else { + switch (sp1 & 0x0f) { + case SERIAL_IIR_RLS: + dbg("Serial Port 1: Receiver status error or address " + "bit detected in 9-bit mode\n"); + break; + case SERIAL_IIR_CTI: + dbg("Serial Port 1: Receiver time out"); + break; + case SERIAL_IIR_MS: + dbg("Serial Port 1: Modem status change"); + break; + } + + switch (sp2 & 0x0f) { + case SERIAL_IIR_RLS: + dbg("Serial Port 2: Receiver status error or address " + "bit detected in 9-bit mode"); + break; + case SERIAL_IIR_CTI: + dbg("Serial Port 2: Receiver time out"); + break; + case SERIAL_IIR_MS: + dbg("Serial Port 2: Modem status change"); + break; + } + } + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting control urb\n", + __FUNCTION__, result); + return; +} + +/* + * mos7720_bulk_in_callback + * this is the callback function for when we have received data on the + * bulk in endpoint. + */ +static void mos7720_bulk_in_callback(struct urb *urb) +{ + int status; + unsigned char *data ; + struct usb_serial_port *port; + struct moschip_port *mos7720_port; + struct tty_struct *tty; + + if (urb->status) { + dbg("nonzero read bulk status received: %d",urb->status); + return; + } + + mos7720_port = urb->context; + if (!mos7720_port) { + dbg("%s","NULL mos7720_port pointer \n"); + return ; + } + + port = mos7720_port->port; + + dbg("Entering...%s", __FUNCTION__); + + data = urb->transfer_buffer; + + tty = port->tty; + if (tty && urb->actual_length) { + tty_buffer_request_room(tty, urb->actual_length); + tty_insert_flip_string(tty, data, urb->actual_length); + tty_flip_buffer_push(tty); + } + + if (!port->read_urb) { + dbg("URB KILLED !!!"); + return; + } + + if (port->read_urb->status != -EINPROGRESS) { + port->read_urb->dev = port->serial->dev; + + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) + dbg("usb_submit_urb(read bulk) failed, status = %d", + status); + } +} + +/* + * mos7720_bulk_out_data_callback + * this is the callback function for when we have finished sending serial + * data on the bulk out endpoint. + */ +static void mos7720_bulk_out_data_callback(struct urb *urb) +{ + struct moschip_port *mos7720_port; + struct tty_struct *tty; + + if (urb->status) { + dbg("nonzero write bulk status received:%d", urb->status); + return; + } + + mos7720_port = urb->context; + if (!mos7720_port) { + dbg("NULL mos7720_port pointer"); + return ; + } + + dbg("Entering ........."); + + tty = mos7720_port->port->tty; + + if (tty && mos7720_port->open) { + /* let the tty driver wakeup if it has a special * + * write_wakeup function */ + if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && + tty->ldisc.write_wakeup) + (tty->ldisc.write_wakeup)(tty); + + /* tell the tty driver that something has changed */ + wake_up_interruptible(&tty->write_wait); + } + + /* schedule_work(&mos7720_port->port->work); */ +} + +/* + * send_mos_cmd + * this function will be used for sending command to device + */ +static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, + __u16 index, void *data) +{ + int status; + unsigned int pipe; + u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); + __u8 requesttype; + __u16 size = 0x0000; + + if (value < MOS_MAX_PORT) { + if (product == MOSCHIP_DEVICE_ID_7715) { + value = value*0x100+0x100; + } else { + value = value*0x100+0x200; + } + } else { + value = 0x0000; + if ((product == MOSCHIP_DEVICE_ID_7715) && + (index != 0x08)) { + dbg("serial->product== MOSCHIP_DEVICE_ID_7715"); + //index = 0x01 ; + } + } + + if (request == MOS_WRITE) { + request = (__u8)MOS_WRITE; + requesttype = (__u8)0x40; + value = value + (__u16)*((unsigned char *)data); + data = NULL; + pipe = usb_sndctrlpipe(serial->dev, 0); + } else { + request = (__u8)MOS_READ; + requesttype = (__u8)0xC0; + size = 0x01; + pipe = usb_rcvctrlpipe(serial->dev,0); + } + + status = usb_control_msg(serial->dev, pipe, request, requesttype, + value, index, data, size, MOS_WDR_TIMEOUT); + + if (status < 0) + dbg("Command Write failed Value %x index %x\n",value,index); + + return status; +} + +static int mos7720_open(struct usb_serial_port *port, struct file * filp) +{ + struct usb_serial *serial; + struct usb_serial_port *port0; + struct urb *urb; + struct moschip_serial *mos7720_serial; + struct moschip_port *mos7720_port; + int response; + int port_number; + char data; + int j; + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return -ENODEV; + + port0 = serial->port[0]; + + mos7720_serial = usb_get_serial_data(serial); + + if (mos7720_serial == NULL || port0 == NULL) + return -ENODEV; + + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + + /* Initialising the write urb pool */ + for (j = 0; j < NUM_URBS; ++j) { + urb = usb_alloc_urb(0,SLAB_ATOMIC); + mos7720_port->write_urb_pool[j] = urb; + + if (urb == NULL) { + err("No more urbs???"); + continue; + } + + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); + if (!urb->transfer_buffer) { + err("%s-out of memory for urb buffers.", __FUNCTION__); + continue; + } + } + + /* Initialize MCS7720 -- Write Init values to corresponding Registers + * + * Register Index + * 1 : IER + * 2 : FCR + * 3 : LCR + * 4 : MCR + * + * 0x08 : SP1/2 Control Reg + */ + port_number = port->number - port->serial->minor; + send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data); + dbg("SS::%p LSR:%x\n",mos7720_port, data); + + dbg("Check:Sending Command .........."); + + data = 0x02; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x01, &data); + data = 0x02; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x02, &data); + + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); + + data = 0xCF; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); + data = 0x03; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + data = 0x0b; + mos7720_port->shadowMCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x0b; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + + data = 0x00; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); + +/* data = 0x00; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, port_number + 1, &data); + data = 0x03; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); + data = 0x00; + send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); +*/ + data = 0x00; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); + + data = data | (port->number - port->serial->minor + 1); + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); + + data = 0x83; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data); + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + data = 0x03; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + +//Matrix + + /* force low_latency on so that our tty_push actually forces * + * the data through,otherwise it is scheduled, and with * + * high data rates (like with OHCI) data can get lost. */ + + if (port->tty) + port->tty->low_latency = 1; + + /* see if we've set up our endpoint info yet * + * (can't set it up in mos7720_startup as the * + * structures were not set up at that time.) */ + if (!mos7720_serial->interrupt_started) { + dbg("Interrupt buffer NULL !!!"); + + /* not set up yet, so do it now */ + mos7720_serial->interrupt_started = 1; + + dbg("To Submit URB !!!"); + + /* set up our interrupt urb */ + usb_fill_int_urb(port0->interrupt_in_urb, serial->dev, + usb_rcvintpipe(serial->dev, + port->interrupt_in_endpointAddress), + port0->interrupt_in_buffer, + port0->interrupt_in_urb->transfer_buffer_length, + mos7720_interrupt_callback, mos7720_port, + port0->interrupt_in_urb->interval); + + /* start interrupt read for this mos7720 this interrupt * + * will continue as long as the mos7720 is connected */ + dbg("Submit URB over !!!"); + response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL); + if (response) + dev_err(&port->dev, + "%s - Error %d submitting control urb", + __FUNCTION__, response); + } + + /* set up our bulk in urb */ + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + port->bulk_in_buffer, + port->read_urb->transfer_buffer_length, + mos7720_bulk_in_callback, mos7720_port); + response = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (response) + dev_err(&port->dev, + "%s - Error %d submitting read urb", __FUNCTION__, response); + + /* initialize our icount structure */ + memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount)); + + /* initialize our port settings */ + mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */ + + /* send a open port command */ + mos7720_port->open = 1; + + return 0; +} + +/* + * mos7720_chars_in_buffer + * this function is called by the tty driver when it wants to know how many + * bytes of data we currently have outstanding in the port (data that has + * been written, but hasn't made it out the port yet) + * If successful, we return the number of bytes left to be written in the + * system, + * Otherwise we return a negative error number. + */ +static int mos7720_chars_in_buffer(struct usb_serial_port *port) +{ + int i; + int chars = 0; + struct moschip_port *mos7720_port; + + dbg("%s:entering ...........", __FUNCTION__); + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) { + dbg("%s:leaving ...........", __FUNCTION__); + return -ENODEV; + } + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) + chars += URB_TRANSFER_BUFFER_SIZE; + } + dbg("%s - returns %d", __FUNCTION__, chars); + return chars; +} + +static void mos7720_close(struct usb_serial_port *port, struct file *filp) +{ + struct usb_serial *serial; + struct moschip_port *mos7720_port; + char data; + int j; + + dbg("mos7720_close:entering..."); + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return; + + for (j = 0; j < NUM_URBS; ++j) + usb_kill_urb(mos7720_port->write_urb_pool[j]); + + /* Freeing Write URBs */ + for (j = 0; j < NUM_URBS; ++j) { + if (mos7720_port->write_urb_pool[j]) { + kfree(mos7720_port->write_urb_pool[j]->transfer_buffer); + usb_free_urb(mos7720_port->write_urb_pool[j]); + } + } + + /* While closing port, shutdown all bulk read, write * + * and interrupt read if they exists */ + if (serial->dev) { + dbg("Shutdown bulk write"); + usb_kill_urb(port->write_urb); + dbg("Shutdown bulk read"); + usb_kill_urb(port->read_urb); + } + + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, + 0x04, &data); + + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, + 0x01, &data); + + mos7720_port->open = 0; + + dbg("Leaving %s", __FUNCTION__); +} + +static void mos7720_break(struct usb_serial_port *port, int break_state) +{ + unsigned char data; + struct usb_serial *serial; + struct moschip_port *mos7720_port; + + dbg("Entering %s", __FUNCTION__); + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return; + + if (break_state == -1) + data = mos7720_port->shadowLCR | UART_LCR_SBC; + else + data = mos7720_port->shadowLCR & ~UART_LCR_SBC; + + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, + 0x03, &data); + + return; +} + +/* + * mos7720_write_room + * this function is called by the tty driver when it wants to know how many + * bytes of data we can accept for a specific port. + * If successful, we return the amount of room that we have for this port + * Otherwise we return a negative error number. + */ +static int mos7720_write_room(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + int room = 0; + int i; + + dbg("%s:entering ...........", __FUNCTION__); + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) { + dbg("%s:leaving ...........", __FUNCTION__); + return -ENODEV; + } + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) + room += URB_TRANSFER_BUFFER_SIZE; + } + + dbg("%s - returns %d", __FUNCTION__, room); + return room; +} + +static int mos7720_write(struct usb_serial_port *port, + const unsigned char *data, int count) +{ + int status; + int i; + int bytes_sent = 0; + int transfer_size; + + struct moschip_port *mos7720_port; + struct usb_serial *serial; + struct urb *urb; + const unsigned char *current_position = data; + + dbg("%s:entering ...........", __FUNCTION__); + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) { + dbg("mos7720_port is NULL"); + return -ENODEV; + } + + /* try to find a free urb in the list */ + urb = NULL; + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { + urb = mos7720_port->write_urb_pool[i]; + dbg("URB:%d",i); + break; + } + } + + if (urb == NULL) { + dbg("%s - no more free urbs", __FUNCTION__); + goto exit; + } + + if (urb->transfer_buffer == NULL) { + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); + if (urb->transfer_buffer == NULL) { + err("%s no more kernel memory...", __FUNCTION__); + goto exit; + } + } + transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE); + + memcpy(urb->transfer_buffer, current_position, transfer_size); + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, + urb->transfer_buffer); + + /* fill urb with data and submit */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + urb->transfer_buffer, transfer_size, + mos7720_bulk_out_data_callback, mos7720_port); + + /* send it down the pipe */ + status = usb_submit_urb(urb,GFP_ATOMIC); + if (status) { + err("%s - usb_submit_urb(write bulk) failed with status = %d", + __FUNCTION__, status); + bytes_sent = status; + goto exit; + } + bytes_sent = transfer_size; + +exit: + return bytes_sent; +} + +static void mos7720_throttle(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + struct tty_struct *tty; + int status; + + dbg("%s- port %d\n", __FUNCTION__, port->number); + + mos7720_port = usb_get_serial_port_data(port); + + if (mos7720_port == NULL) + return; + + if (!mos7720_port->open) { + dbg("port not opened"); + return; + } + + dbg("%s: Entering ..........", __FUNCTION__); + + tty = port->tty; + if (!tty) { + dbg("%s - no tty available", __FUNCTION__); + return; + } + + /* if we are implementing XON/XOFF, send the stop character */ + if (I_IXOFF(tty)) { + unsigned char stop_char = STOP_CHAR(tty); + status = mos7720_write(port, &stop_char, 1); + if (status <= 0) + return; + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios->c_cflag & CRTSCTS) { + mos7720_port->shadowMCR &= ~UART_MCR_RTS; + status = send_mos_cmd(port->serial, MOS_WRITE, + port->number - port->serial->minor, + UART_MCR, &mos7720_port->shadowMCR); + if (status != 0) + return; + } +} + +static void mos7720_unthrottle(struct usb_serial_port *port) +{ + struct tty_struct *tty; + int status; + struct moschip_port *mos7720_port = usb_get_serial_port_data(port); + + if (mos7720_port == NULL) + return; + + if (!mos7720_port->open) { + dbg("%s - port not opened", __FUNCTION__); + return; + } + + dbg("%s: Entering ..........", __FUNCTION__); + + tty = port->tty; + if (!tty) { + dbg("%s - no tty available", __FUNCTION__); + return; + } + + /* if we are implementing XON/XOFF, send the start character */ + if (I_IXOFF(tty)) { + unsigned char start_char = START_CHAR(tty); + status = mos7720_write(port, &start_char, 1); + if (status <= 0) + return; + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios->c_cflag & CRTSCTS) { + mos7720_port->shadowMCR |= UART_MCR_RTS; + status = send_mos_cmd(port->serial, MOS_WRITE, + port->number - port->serial->minor, + UART_MCR, &mos7720_port->shadowMCR); + if (status != 0) + return; + } +} + +static int set_higher_rates(struct moschip_port *mos7720_port, + unsigned int baud) +{ + unsigned char data; + struct usb_serial_port *port; + struct usb_serial *serial; + int port_number; + + if (mos7720_port == NULL) + return -EINVAL; + + port = mos7720_port->port; + serial = port->serial; + + /*********************************************** + * Init Sequence for higher rates + ***********************************************/ + dbg("Sending Setting Commands .........."); + port_number = port->number - port->serial->minor; + + data = 0x000; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + data = 0x000; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); + data = 0x0CF; + send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data); + data = 0x00b; + mos7720_port->shadowMCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x00b; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + + data = 0x000; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); + data = 0x000; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); + + + /*********************************************** + * Set for higher rates * + ***********************************************/ + + data = baud * 0x10; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1,&data); + + data = 0x003; + send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); + data = 0x003; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); + + data = 0x02b; + mos7720_port->shadowMCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x02b; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + + /*********************************************** + * Set DLL/DLM + ***********************************************/ + + data = mos7720_port->shadowLCR | UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + + data = 0x001; /* DLL */ + send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data); + data = 0x000; /* DLM */ + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + + data = mos7720_port->shadowLCR & ~UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); + + return 0; +} + +/* baud rate information */ +struct divisor_table_entry +{ + __u32 baudrate; + __u16 divisor; +}; + +/* Define table of divisors for moschip 7720 hardware * + * These assume a 3.6864MHz crystal, the standard /16, and * + * MCR.7 = 0. */ +static struct divisor_table_entry divisor_table[] = { + { 50, 2304}, + { 110, 1047}, /* 2094.545455 => 230450 => .0217 % over */ + { 134, 857}, /* 1713.011152 => 230398.5 => .00065% under */ + { 150, 768}, + { 300, 384}, + { 600, 192}, + { 1200, 96}, + { 1800, 64}, + { 2400, 48}, + { 4800, 24}, + { 7200, 16}, + { 9600, 12}, + { 19200, 6}, + { 38400, 3}, + { 57600, 2}, + { 115200, 1}, +}; + +/***************************************************************************** + * calc_baud_rate_divisor + * this function calculates the proper baud rate divisor for the specified + * baud rate. + *****************************************************************************/ +static int calc_baud_rate_divisor(int baudrate, int *divisor) +{ + int i; + __u16 custom; + __u16 round1; + __u16 round; + + + dbg("%s - %d", __FUNCTION__, baudrate); + + for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { + if (divisor_table[i].baudrate == baudrate) { + *divisor = divisor_table[i].divisor; + return 0; + } + } + + /* After trying for all the standard baud rates * + * Try calculating the divisor for this baud rate */ + if (baudrate > 75 && baudrate < 230400) { + /* get the divisor */ + custom = (__u16)(230400L / baudrate); + + /* Check for round off */ + round1 = (__u16)(2304000L / baudrate); + round = (__u16)(round1 - (custom * 10)); + if (round > 4) + custom++; + *divisor = custom; + + dbg("Baud %d = %d",baudrate, custom); + return 0; + } + + dbg("Baud calculation Failed..."); + return -EINVAL; +} + +/* + * send_cmd_write_baud_rate + * this function sends the proper command to change the baud rate of the + * specified port. + */ +static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, + int baudrate) +{ + struct usb_serial_port *port; + struct usb_serial *serial; + int divisor; + int status; + unsigned char data; + unsigned char number; + + if (mos7720_port == NULL) + return -1; + + port = mos7720_port->port; + serial = port->serial; + + dbg("%s: Entering ..........", __FUNCTION__); + + number = port->number - port->serial->minor; + dbg("%s - port = %d, baud = %d", __FUNCTION__, port->number, baudrate); + + /* Calculate the Divisor */ + status = calc_baud_rate_divisor(baudrate, &divisor); + if (status) { + err("%s - bad baud rate", __FUNCTION__); + return status; + } + + /* Enable access to divisor latch */ + data = mos7720_port->shadowLCR | UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data); + + /* Write the divisor */ + data = ((unsigned char)(divisor & 0xff)); + send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data); + + data = ((unsigned char)((divisor & 0xff00) >> 8)); + send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data); + + /* Disable access to divisor latch */ + data = mos7720_port->shadowLCR & ~UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data); + + return status; +} + +/* + * change_port_settings + * This routine is called to set the UART on the device to match + * the specified new settings. + */ +static void change_port_settings(struct moschip_port *mos7720_port, + struct termios *old_termios) +{ + struct usb_serial_port *port; + struct usb_serial *serial; + struct tty_struct *tty; + int baud; + unsigned cflag; + unsigned iflag; + __u8 mask = 0xff; + __u8 lData; + __u8 lParity; + __u8 lStop; + int status; + int port_number; + char data; + + if (mos7720_port == NULL) + return ; + + port = mos7720_port->port; + serial = port->serial; + port_number = port->number - port->serial->minor; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (!mos7720_port->open) { + dbg("%s - port not opened", __FUNCTION__); + return; + } + + tty = mos7720_port->port->tty; + + if ((!tty) || (!tty->termios)) { + dbg("%s - no tty structures", __FUNCTION__); + return; + } + + dbg("%s: Entering ..........", __FUNCTION__); + + lData = UART_LCR_WLEN8; + lStop = 0x00; /* 1 stop bit */ + lParity = 0x00; /* No parity */ + + cflag = tty->termios->c_cflag; + iflag = tty->termios->c_iflag; + + /* Change the number of bits */ + switch (cflag & CSIZE) { + case CS5: + lData = UART_LCR_WLEN5; + mask = 0x1f; + break; + + case CS6: + lData = UART_LCR_WLEN6; + mask = 0x3f; + break; + + case CS7: + lData = UART_LCR_WLEN7; + mask = 0x7f; + break; + default: + case CS8: + lData = UART_LCR_WLEN8; + break; + } + + /* Change the Parity bit */ + if (cflag & PARENB) { + if (cflag & PARODD) { + lParity = UART_LCR_PARITY; + dbg("%s - parity = odd", __FUNCTION__); + } else { + lParity = (UART_LCR_EPAR | UART_LCR_PARITY); + dbg("%s - parity = even", __FUNCTION__); + } + + } else { + dbg("%s - parity = none", __FUNCTION__); + } + + if (cflag & CMSPAR) + lParity = lParity | 0x20; + + /* Change the Stop bit */ + if (cflag & CSTOPB) { + lStop = UART_LCR_STOP; + dbg("%s - stop bits = 2", __FUNCTION__); + } else { + lStop = 0x00; + dbg("%s - stop bits = 1", __FUNCTION__); + } + +#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ +#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ +#define LCR_PAR_MASK 0x38 /* Mask for parity field */ + + /* Update the LCR with the correct value */ + mos7720_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); + mos7720_port->shadowLCR |= (lData | lParity | lStop); + + + /* Disable Interrupts */ + data = 0x00; + send_mos_cmd(serial,MOS_WRITE,port->number - port->serial->minor, UART_IER, &data); + + data = 0x00; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); + + data = 0xcf; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); + + /* Send the updated LCR value to the mos7720 */ + data = mos7720_port->shadowLCR; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data); + + data = 0x00b; + mos7720_port->shadowMCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x00b; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + + /* set up the MCR register and send it to the mos7720 */ + mos7720_port->shadowMCR = UART_MCR_OUT2; + if (cflag & CBAUD) + mos7720_port->shadowMCR |= (UART_MCR_DTR | UART_MCR_RTS); + + if (cflag & CRTSCTS) { + mos7720_port->shadowMCR |= (UART_MCR_XONANY); + + /* To set hardware flow control to the specified * + * serial port, in SP1/2_CONTROL_REG */ + if (port->number) { + data = 0x001; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, + 0x08, &data); + } else { + data = 0x002; + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, + 0x08, &data); + } + } else { + mos7720_port->shadowMCR &= ~(UART_MCR_XONANY); + } + + data = mos7720_port->shadowMCR; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_MCR, &data); + + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(tty); + if (!baud) { + /* pick a default, any default... */ + dbg("Picked default baud..."); + baud = 9600; + } + + if (baud >= 230400) { + set_higher_rates(mos7720_port, baud); + /* Enable Interrupts */ + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data); + return; + } + + dbg("%s - baud rate = %d", __FUNCTION__, baud); + status = send_cmd_write_baud_rate(mos7720_port, baud); + + /* Enable Interrupts */ + data = 0x0c; + send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data); + + if (port->read_urb->status != -EINPROGRESS) { + port->read_urb->dev = serial->dev; + + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) + dbg("usb_submit_urb(read bulk) failed, status = %d", + status); + } + return; +} + +/* + * mos7720_set_termios + * this function is called by the tty driver when it wants to change the + * termios structure. + */ +static void mos7720_set_termios(struct usb_serial_port *port, + struct termios *old_termios) +{ + int status; + unsigned int cflag; + struct usb_serial *serial; + struct moschip_port *mos7720_port; + struct tty_struct *tty; + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + + if (mos7720_port == NULL) + return; + + tty = port->tty; + + if (!port->tty || !port->tty->termios) { + dbg("%s - no tty or termios", __FUNCTION__); + return; + } + + if (!mos7720_port->open) { + dbg("%s - port not opened", __FUNCTION__); + return; + } + + dbg("%s\n","setting termios - ASPIRE"); + + cflag = tty->termios->c_cflag; + + if (!cflag) { + printk("%s %s\n",__FUNCTION__,"cflag is NULL"); + return; + } + + /* check that they really want us to change something */ + if (old_termios) { + if ((cflag == old_termios->c_cflag) && + (RELEVANT_IFLAG(tty->termios->c_iflag) == + RELEVANT_IFLAG(old_termios->c_iflag))) { + dbg("Nothing to change"); + return; + } + } + + dbg("%s - clfag %08x iflag %08x", __FUNCTION__, + tty->termios->c_cflag, + RELEVANT_IFLAG(tty->termios->c_iflag)); + + if (old_termios) + dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, + old_termios->c_cflag, + RELEVANT_IFLAG(old_termios->c_iflag)); + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* change the port settings to the new ones specified */ + change_port_settings(mos7720_port, old_termios); + + if(!port->read_urb) { + dbg("%s","URB KILLED !!!!!\n"); + return; + } + + if(port->read_urb->status != -EINPROGRESS) { + port->read_urb->dev = serial->dev; + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) + dbg("usb_submit_urb(read bulk) failed, status = %d", + status); + } + return; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct moschip_port *mos7720_port, + unsigned int __user *value) +{ + int count; + unsigned int result = 0; + + count = mos7720_chars_in_buffer(mos7720_port->port); + if (count == 0) { + dbg("%s -- Empty", __FUNCTION__); + result = TIOCSER_TEMT; + } + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +/* + * get_number_bytes_avail - get number of bytes available + * + * Purpose: Let user call ioctl to get the count of number of bytes available. + */ +static int get_number_bytes_avail(struct moschip_port *mos7720_port, + unsigned int __user *value) +{ + unsigned int result = 0; + struct tty_struct *tty = mos7720_port->port->tty; + + if (!tty) + return -ENOIOCTLCMD; + + result = tty->read_cnt; + + dbg("%s(%d) = %d", __FUNCTION__, mos7720_port->port->number, result); + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + + return -ENOIOCTLCMD; +} + +static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, + unsigned int __user *value) +{ + unsigned int mcr ; + unsigned int arg; + unsigned char data; + + struct usb_serial_port *port; + + if (mos7720_port == NULL) + return -1; + + port = (struct usb_serial_port*)mos7720_port->port; + mcr = mos7720_port->shadowMCR; + + if (copy_from_user(&arg, value, sizeof(int))) + return -EFAULT; + + switch (cmd) { + case TIOCMBIS: + if (arg & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (arg & TIOCM_DTR) + mcr |= UART_MCR_RTS; + if (arg & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + break; + + case TIOCMBIC: + if (arg & TIOCM_RTS) + mcr &= ~UART_MCR_RTS; + if (arg & TIOCM_DTR) + mcr &= ~UART_MCR_RTS; + if (arg & TIOCM_LOOP) + mcr &= ~UART_MCR_LOOP; + break; + + case TIOCMSET: + /* turn off the RTS and DTR and LOOPBACK + * and then only turn on what was asked to */ + mcr &= ~(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_LOOP); + mcr |= ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0); + mcr |= ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0); + mcr |= ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0); + break; + } + + mos7720_port->shadowMCR = mcr; + + data = mos7720_port->shadowMCR; + send_mos_cmd(port->serial, MOS_WRITE, + port->number - port->serial->minor, UART_MCR, &data); + + return 0; +} + +static int get_modem_info(struct moschip_port *mos7720_port, + unsigned int __user *value) +{ + unsigned int result = 0; + unsigned int msr = mos7720_port->shadowMSR; + unsigned int mcr = mos7720_port->shadowMCR; + + result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ + | ((mcr & UART_MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ + | ((msr & UART_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ + | ((msr & UART_MSR_DCD) ? TIOCM_CAR: 0) /* 0x040 */ + | ((msr & UART_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ + | ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ + + + dbg("%s -- %x", __FUNCTION__, result); + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +static int get_serial_info(struct moschip_port *mos7720_port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + + tmp.type = PORT_16550A; + tmp.line = mos7720_port->port->serial->minor; + tmp.port = mos7720_port->port->number; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int mos7720_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct moschip_port *mos7720_port; + struct async_icount cnow; + struct async_icount cprev; + struct serial_icounter_struct icount; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return -ENODEV; + + dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); + + switch (cmd) { + case TIOCINQ: + /* return number of bytes available */ + dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number); + return get_number_bytes_avail(mos7720_port, + (unsigned int __user *)arg); + break; + + case TIOCSERGETLSR: + dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number); + return get_lsr_info(mos7720_port, (unsigned int __user *)arg); + return 0; + + case TIOCMBIS: + case TIOCMBIC: + case TIOCMSET: + dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__, + port->number); + return set_modem_info(mos7720_port, cmd, + (unsigned int __user *)arg); + + case TIOCMGET: + dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number); + return get_modem_info(mos7720_port, + (unsigned int __user *)arg); + + case TIOCGSERIAL: + dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number); + return get_serial_info(mos7720_port, + (struct serial_struct __user *)arg); + + case TIOCSSERIAL: + dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number); + break; + + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); + cprev = mos7720_port->icount; + while (1) { + if (signal_pending(current)) + return -ERESTARTSYS; + cnow = mos7720_port->icount; + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + return 0; + } + cprev = cnow; + } + /* NOTREACHED */ + break; + + case TIOCGICOUNT: + cnow = mos7720_port->icount; + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, + port->number, icount.rx, icount.tx ); + if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) + return -EFAULT; + return 0; + } + + return -ENOIOCTLCMD; +} + +static int mos7720_startup(struct usb_serial *serial) +{ + struct moschip_serial *mos7720_serial; + struct moschip_port *mos7720_port; + struct usb_device *dev; + int i; + char data; + + dbg("%s: Entering ..........", __FUNCTION__); + + if (!serial) { + dbg("Invalid Handler"); + return -ENODEV; + } + + dev = serial->dev; + + /* create our private serial structure */ + mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL); + if (mos7720_serial == NULL) { + err("%s - Out of memory", __FUNCTION__); + return -ENOMEM; + } + + usb_set_serial_data(serial, mos7720_serial); + + /* we set up the pointers to the endpoints in the mos7720_open * + * function, as the structures aren't created yet. */ + + /* set up port private structures */ + for (i = 0; i < serial->num_ports; ++i) { + mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); + if (mos7720_port == NULL) { + err("%s - Out of memory", __FUNCTION__); + usb_set_serial_data(serial, NULL); + kfree(mos7720_serial); + return -ENOMEM; + } + + /* Initialize all port interrupt end point to port 0 int + * endpoint. Our device has only one interrupt endpoint + * comman to all ports */ + serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; + + mos7720_port->port = serial->port[i]; + usb_set_serial_port_data(serial->port[i], mos7720_port); + + dbg("port number is %d", serial->port[i]->number); + dbg("serial number is %d", serial->minor); + } + + + /* setting configuration feature to one */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + (__u8)0x03, 0x00,0x01,0x00, NULL, 0x00, 5*HZ); + + send_mos_cmd(serial,MOS_READ,0x00, UART_LSR, &data); // LSR For Port 1 + dbg("LSR:%x",data); + + send_mos_cmd(serial,MOS_READ,0x01, UART_LSR, &data); // LSR For Port 2 + dbg("LSR:%x",data); + + return 0; +} + +static void mos7720_shutdown(struct usb_serial *serial) +{ + int i; + + /* free private structure allocated for serial port */ + for (i=0; i < serial->num_ports; ++i) { + kfree(usb_get_serial_port_data(serial->port[i])); + usb_set_serial_port_data(serial->port[i], NULL); + } + + /* free private structure allocated for serial device */ + kfree(usb_get_serial_data(serial)); + usb_set_serial_data(serial, NULL); +} + +static struct usb_serial_driver moschip7720_2port_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "moschip7720", + }, + .description = "Moschip 2 port adapter", + .id_table = moschip_port_id_table, + .num_interrupt_in = 1, + .num_bulk_in = 2, + .num_bulk_out = 2, + .num_ports = 2, + .open = mos7720_open, + .close = mos7720_close, + .throttle = mos7720_throttle, + .unthrottle = mos7720_unthrottle, + .attach = mos7720_startup, + .shutdown = mos7720_shutdown, + .ioctl = mos7720_ioctl, + .set_termios = mos7720_set_termios, + .write = mos7720_write, + .write_room = mos7720_write_room, + .chars_in_buffer = mos7720_chars_in_buffer, + .break_ctl = mos7720_break, + .read_bulk_callback = mos7720_bulk_in_callback, +}; + +static struct usb_driver usb_driver = { + .name = "moschip7720", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = moschip_port_id_table, +}; + +static int __init moschip7720_init(void) +{ + int retval; + + dbg("%s: Entering ..........", __FUNCTION__); + + /* Register with the usb serial */ + retval = usb_serial_register(&moschip7720_2port_driver); + if (retval) + goto failed_port_device_register; + + info(DRIVER_DESC " " DRIVER_VERSION); + + /* Register with the usb */ + retval = usb_register(&usb_driver); + if (retval) + goto failed_usb_register; + + return 0; + +failed_usb_register: + usb_serial_deregister(&moschip7720_2port_driver); + +failed_port_device_register: + return retval; +} + +static void __exit moschip7720_exit(void) +{ + usb_deregister(&usb_driver); + usb_serial_deregister(&moschip7720_2port_driver); +} + +module_init(moschip7720_init); +module_exit(moschip7720_exit); + +/* Module information */ +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 021be39fe16..02c89e10b2c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2413,11 +2413,12 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, } mos7840_port = mos7840_get_port_private(port); - tty = mos7840_port->port->tty; if (mos7840_port == NULL) return -1; + tty = mos7840_port->port->tty; + dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); switch (cmd) { @@ -2595,12 +2596,11 @@ static int mos7840_startup(struct usb_serial *serial) /* set up port private structures */ for (i = 0; i < serial->num_ports; ++i) { - mos7840_port = kmalloc(sizeof(struct moschip_port), GFP_KERNEL); + mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7840_port == NULL) { err("%s - Out of memory", __FUNCTION__); return -ENOMEM; } - memset(mos7840_port, 0, sizeof(struct moschip_port)); /* Initialize all port interrupt end point to port 0 int endpoint * * Our device has only one interrupt end point comman to all port */ diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 0610409a656..054abee8165 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -95,8 +95,7 @@ static void navman_close(struct usb_serial_port *port, struct file *filp) { dbg("%s - port %d", __FUNCTION__, port->number); - if (port->interrupt_in_urb) - usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); } static int navman_write(struct usb_serial_port *port, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index d29638daa98..4b5097fa48d 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1,75 +1,713 @@ /* - * Sierra Wireless CDMA Wireless Serial USB driver - * - * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com> - * Original Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ + USB Driver for Sierra Wireless + + Copyright (C) 2006 Kevin Lloyd <linux@sierrawireless.com> + + IMPORTANT DISCLAIMER: This driver is not commercially supported by + Sierra Wireless. Use at your own risk. + + This driver is free software; you can redistribute it and/or modify + it under the terms of Version 2 of the GNU General Public License as + published by the Free Software Foundation. + + Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de> + Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> + + History: +*/ + +#define DRIVER_VERSION "v.1.0.5" +#define DRIVER_AUTHOR "Kevin Lloyd <linux@sierrawireless.com>" +#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" #include <linux/kernel.h> -#include <linux/init.h> +#include <linux/jiffies.h> +#include <linux/errno.h> #include <linux/tty.h> +#include <linux/tty_flip.h> #include <linux/module.h> #include <linux/usb.h> #include <linux/usb/serial.h> + static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */ { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */ { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ - /* Following devices are supported in the airprime.c driver */ - /* { USB_DEVICE(0x1199, 0x0112) }, */ /* Sierra Wireless AirCard 580 */ - /* { USB_DEVICE(0x0F3D, 0x0112) }, */ /* AirPrime/Sierra PC 5220 */ + + { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ + { USB_DEVICE(0x0F3D, 0x0112) }, /* AirPrime/Sierra PC 5220 */ { } }; MODULE_DEVICE_TABLE(usb, id_table); +static struct usb_device_id id_table_1port [] = { + { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ + { USB_DEVICE(0x0F3D, 0x0112) }, /* AirPrime/Sierra PC 5220 */ + { } +}; + +static struct usb_device_id id_table_3port [] = { + { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ + { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ + { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */ + { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */ + { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ + { } +}; + static struct usb_driver sierra_driver = { - .name = "sierra_wireless", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, + .name = "sierra", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + + +static int debug; + +/* per port private data */ +#define N_IN_URB 4 +#define N_OUT_URB 1 +#define IN_BUFLEN 4096 +#define OUT_BUFLEN 128 + +struct sierra_port_private { + /* Input endpoints and buffer for this port */ + struct urb *in_urbs[N_IN_URB]; + char in_buffer[N_IN_URB][IN_BUFLEN]; + /* Output endpoints and buffer for this port */ + struct urb *out_urbs[N_OUT_URB]; + char out_buffer[N_OUT_URB][OUT_BUFLEN]; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ + int dtr_state; + int cts_state; /* Handshaking pins (inputs) */ + int dsr_state; + int dcd_state; + int ri_state; + + unsigned long tx_start_time[N_OUT_URB]; +}; + +static int sierra_send_setup(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + + dbg("%s", __FUNCTION__); + + portdata = usb_get_serial_port_data(port); + + if (port->tty) { + int val = 0; + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT); + } + + return 0; +} + +static void sierra_rx_throttle(struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + +static void sierra_rx_unthrottle(struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + +static void sierra_break_ctl(struct usb_serial_port *port, int break_state) +{ + /* Unfortunately, I don't know how to send a break */ + dbg("%s", __FUNCTION__); +} + +static void sierra_set_termios(struct usb_serial_port *port, + struct termios *old_termios) +{ + dbg("%s", __FUNCTION__); + + sierra_send_setup(port); +} + +static int sierra_tiocmget(struct usb_serial_port *port, struct file *file) +{ + unsigned int value; + struct sierra_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + value = ((portdata->rts_state) ? TIOCM_RTS : 0) | + ((portdata->dtr_state) ? TIOCM_DTR : 0) | + ((portdata->cts_state) ? TIOCM_CTS : 0) | + ((portdata->dsr_state) ? TIOCM_DSR : 0) | + ((portdata->dcd_state) ? TIOCM_CAR : 0) | + ((portdata->ri_state) ? TIOCM_RNG : 0); + + return value; +} + +static int sierra_tiocmset(struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + struct sierra_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + portdata->rts_state = 1; + if (set & TIOCM_DTR) + portdata->dtr_state = 1; + + if (clear & TIOCM_RTS) + portdata->rts_state = 0; + if (clear & TIOCM_DTR) + portdata->dtr_state = 0; + return sierra_send_setup(port); +} + +static int sierra_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + +/* Write */ +static int sierra_write(struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct sierra_port_private *portdata; + int i; + int left, todo; + struct urb *this_urb = NULL; /* spurious */ + int err; + + portdata = usb_get_serial_port_data(port); + + dbg("%s: write (%d chars)", __FUNCTION__, count); + + i = 0; + left = count; + for (i=0; left > 0 && i < N_OUT_URB; i++) { + todo = left; + if (todo > OUT_BUFLEN) + todo = OUT_BUFLEN; + + this_urb = portdata->out_urbs[i]; + if (this_urb->status == -EINPROGRESS) { + if (time_before(jiffies, + portdata->tx_start_time[i] + 10 * HZ)) + continue; + usb_unlink_urb(this_urb); + continue; + } + if (this_urb->status != 0) + dbg("usb_write %p failed (err=%d)", + this_urb, this_urb->status); + + dbg("%s: endpoint %d buf %d", __FUNCTION__, + usb_pipeendpoint(this_urb->pipe), i); + + /* send the data */ + memcpy (this_urb->transfer_buffer, buf, todo); + this_urb->transfer_buffer_length = todo; + + this_urb->dev = port->serial->dev; + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err) { + dbg("usb_submit_urb %p (write bulk) failed " + "(%d, has %d)", this_urb, + err, this_urb->status); + continue; + } + portdata->tx_start_time[i] = jiffies; + buf += todo; + left -= todo; + } + + count -= left; + dbg("%s: wrote (did %d)", __FUNCTION__, count); + return count; +} + +static void sierra_indat_callback(struct urb *urb) +{ + int err; + int endpoint; + struct usb_serial_port *port; + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + + dbg("%s: %p", __FUNCTION__, urb); + + endpoint = usb_pipeendpoint(urb->pipe); + port = (struct usb_serial_port *) urb->context; + + if (urb->status) { + dbg("%s: nonzero status: %d on endpoint %02x.", + __FUNCTION__, urb->status, endpoint); + } else { + tty = port->tty; + if (urb->actual_length) { + tty_buffer_request_room(tty, urb->actual_length); + tty_insert_flip_string(tty, data, urb->actual_length); + tty_flip_buffer_push(tty); + } else { + dbg("%s: empty read urb received", __FUNCTION__); + } + + /* Resubmit urb so we continue receiving */ + if (port->open_count && urb->status != -ESHUTDOWN) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + printk(KERN_ERR "%s: resubmit read urb failed. " + "(%d)", __FUNCTION__, err); + } + } + return; +} + +static void sierra_outdat_callback(struct urb *urb) +{ + struct usb_serial_port *port; + + dbg("%s", __FUNCTION__); + + port = (struct usb_serial_port *) urb->context; + + usb_serial_port_softint(port); +} + +static void sierra_instat_callback(struct urb *urb) +{ + int err; + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + + dbg("%s", __FUNCTION__); + dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata); + + if (urb->status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + + if (!req_pkt) { + dbg("%s: NULL req_pkt\n", __FUNCTION__); + return; + } + if ((req_pkt->bRequestType == 0xA1) && + (req_pkt->bRequest == 0x20)) { + int old_dcd_state; + unsigned char signals = *((unsigned char *) + urb->transfer_buffer + + sizeof(struct usb_ctrlrequest)); + + dbg("%s: signal x%x", __FUNCTION__, signals); + + old_dcd_state = portdata->dcd_state; + portdata->cts_state = 1; + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); + + if (port->tty && !C_CLOCAL(port->tty) && + old_dcd_state && !portdata->dcd_state) + tty_hangup(port->tty); + } else { + dbg("%s: type %x req %x", __FUNCTION__, + req_pkt->bRequestType,req_pkt->bRequest); + } + } else + dbg("%s: error %d", __FUNCTION__, urb->status); + + /* Resubmit urb so we continue receiving IRQ data */ + if (urb->status != -ESHUTDOWN) { + urb->dev = serial->dev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + dbg("%s: resubmit intr urb failed. (%d)", + __FUNCTION__, err); + } +} + +static int sierra_write_room(struct usb_serial_port *port) +{ + struct sierra_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) { + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status != -EINPROGRESS) + data_len += OUT_BUFLEN; + } + + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + +static int sierra_chars_in_buffer(struct usb_serial_port *port) +{ + struct sierra_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) { + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status == -EINPROGRESS) + data_len += this_urb->transfer_buffer_length; + } + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + +static int sierra_open(struct usb_serial_port *port, struct file *filp) +{ + struct sierra_port_private *portdata; + struct usb_serial *serial = port->serial; + int i, err; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + dbg("%s", __FUNCTION__); + + /* Set some sane defaults */ + portdata->rts_state = 1; + portdata->dtr_state = 1; + + /* Reset low level data toggle and start reading from endpoints */ + for (i = 0; i < N_IN_URB; i++) { + urb = portdata->in_urbs[i]; + if (! urb) + continue; + if (urb->dev != serial->dev) { + dbg("%s: dev %p != %p", __FUNCTION__, + urb->dev, serial->dev); + continue; + } + + /* + * make sure endpoint data toggle is synchronized with the + * device + */ + usb_clear_halt(urb->dev, urb->pipe); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + dbg("%s: submit urb %d failed (%d) %d", + __FUNCTION__, i, err, + urb->transfer_buffer_length); + } + } + + /* Reset low level data toggle on out endpoints */ + for (i = 0; i < N_OUT_URB; i++) { + urb = portdata->out_urbs[i]; + if (! urb) + continue; + urb->dev = serial->dev; + /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), 0); */ + } + + port->tty->low_latency = 1; + + sierra_send_setup(port); + + return (0); +} + +static inline void stop_urb(struct urb *urb) +{ + if (urb && urb->status == -EINPROGRESS) + usb_kill_urb(urb); +} + +static void sierra_close(struct usb_serial_port *port, struct file *filp) +{ + int i; + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + + dbg("%s", __FUNCTION__); + portdata = usb_get_serial_port_data(port); + + portdata->rts_state = 0; + portdata->dtr_state = 0; + + if (serial->dev) { + sierra_send_setup(port); + + /* Stop reading/writing urbs */ + for (i = 0; i < N_IN_URB; i++) + stop_urb(portdata->in_urbs[i]); + for (i = 0; i < N_OUT_URB; i++) + stop_urb(portdata->out_urbs[i]); + } + port->tty = NULL; +} + +/* Helper functions used by sierra_setup_urbs */ +static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, + int dir, void *ctx, char *buf, int len, + usb_complete_t callback) +{ + struct urb *urb; + + if (endpoint == -1) + return NULL; /* endpoint not needed */ + + urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ + if (urb == NULL) { + dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint); + return NULL; + } + + /* Fill URB using supplied data. */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + return urb; +} + +/* Setup urbs */ +static void sierra_setup_urbs(struct usb_serial *serial) +{ + int i,j; + struct usb_serial_port *port; + struct sierra_port_private *portdata; + + dbg("%s", __FUNCTION__); + + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + + /* Do indat endpoints first */ + for (j = 0; j < N_IN_URB; ++j) { + portdata->in_urbs[j] = sierra_setup_urb (serial, + port->bulk_in_endpointAddress, USB_DIR_IN, port, + portdata->in_buffer[j], IN_BUFLEN, sierra_indat_callback); + } + + /* outdat endpoints */ + for (j = 0; j < N_OUT_URB; ++j) { + portdata->out_urbs[j] = sierra_setup_urb (serial, + port->bulk_out_endpointAddress, USB_DIR_OUT, port, + portdata->out_buffer[j], OUT_BUFLEN, sierra_outdat_callback); + } + } +} + +static int sierra_startup(struct usb_serial *serial) +{ + int i, err; + struct usb_serial_port *port; + struct sierra_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Now setup per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); + if (!portdata) { + dbg("%s: kmalloc for sierra_port_private (%d) failed!.", + __FUNCTION__, i); + return (1); + } + + usb_set_serial_port_data(port, portdata); + + if (! port->interrupt_in_urb) + continue; + err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (err) + dbg("%s: submit irq_in urb failed %d", + __FUNCTION__, err); + } + + sierra_setup_urbs(serial); + + return (0); +} + +static void sierra_shutdown(struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct sierra_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Stop reading/writing urbs */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + for (j = 0; j < N_IN_URB; j++) + stop_urb(portdata->in_urbs[j]); + for (j = 0; j < N_OUT_URB; j++) + stop_urb(portdata->out_urbs[j]); + } + + /* Now free them */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + + for (j = 0; j < N_IN_URB; j++) { + if (portdata->in_urbs[j]) { + usb_free_urb(portdata->in_urbs[j]); + portdata->in_urbs[j] = NULL; + } + } + for (j = 0; j < N_OUT_URB; j++) { + if (portdata->out_urbs[j]) { + usb_free_urb(portdata->out_urbs[j]); + portdata->out_urbs[j] = NULL; + } + } + } + + /* Now free per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + kfree(usb_get_serial_port_data(port)); + } +} + +static struct usb_serial_driver sierra_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "sierra1", + }, + .description = "Sierra USB modem (1 port)", + .id_table = id_table_1port, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = sierra_open, + .close = sierra_close, + .write = sierra_write, + .write_room = sierra_write_room, + .chars_in_buffer = sierra_chars_in_buffer, + .throttle = sierra_rx_throttle, + .unthrottle = sierra_rx_unthrottle, + .ioctl = sierra_ioctl, + .set_termios = sierra_set_termios, + .break_ctl = sierra_break_ctl, + .tiocmget = sierra_tiocmget, + .tiocmset = sierra_tiocmset, + .attach = sierra_startup, + .shutdown = sierra_shutdown, + .read_int_callback = sierra_instat_callback, }; -static struct usb_serial_driver sierra_device = { +static struct usb_serial_driver sierra_3port_device = { .driver = { - .owner = THIS_MODULE, - .name = "Sierra_Wireless", + .owner = THIS_MODULE, + .name = "sierra3", }, - .id_table = id_table, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 3, + .description = "Sierra USB modem (3 port)", + .id_table = id_table_3port, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = 3, + .num_bulk_out = 3, + .num_ports = 3, + .open = sierra_open, + .close = sierra_close, + .write = sierra_write, + .write_room = sierra_write_room, + .chars_in_buffer = sierra_chars_in_buffer, + .throttle = sierra_rx_throttle, + .unthrottle = sierra_rx_unthrottle, + .ioctl = sierra_ioctl, + .set_termios = sierra_set_termios, + .break_ctl = sierra_break_ctl, + .tiocmget = sierra_tiocmget, + .tiocmset = sierra_tiocmset, + .attach = sierra_startup, + .shutdown = sierra_shutdown, + .read_int_callback = sierra_instat_callback, }; +/* Functions used by new usb-serial code. */ static int __init sierra_init(void) { int retval; - - retval = usb_serial_register(&sierra_device); + retval = usb_serial_register(&sierra_1port_device); + if (retval) + goto failed_1port_device_register; + retval = usb_serial_register(&sierra_3port_device); if (retval) - return retval; + goto failed_3port_device_register; + + retval = usb_register(&sierra_driver); if (retval) - usb_serial_deregister(&sierra_device); + goto failed_driver_register; + + info(DRIVER_DESC ": " DRIVER_VERSION); + + return 0; + +failed_driver_register: + usb_serial_deregister(&sierra_3port_device); +failed_3port_device_register: + usb_serial_deregister(&sierra_1port_device); +failed_1port_device_register: return retval; } static void __exit sierra_exit(void) { - usb_deregister(&sierra_driver); - usb_serial_deregister(&sierra_device); + usb_deregister (&sierra_driver); + usb_serial_deregister(&sierra_1port_device); + usb_serial_deregister(&sierra_3port_device); } module_init(sierra_init); module_exit(sierra_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); + +#ifdef CONFIG_USB_DEBUG +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug messages"); +#endif + diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 07400c0c8a8..ae98d8cbdbb 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -228,6 +228,7 @@ static int product_5052_count; /* null entry */ static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, }; static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { @@ -239,6 +240,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { static struct usb_device_id ti_id_table_combined[] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, @@ -459,13 +461,12 @@ static int ti_startup(struct usb_serial *serial) /* set up port structures */ for (i = 0; i < serial->num_ports; ++i) { - tport = kmalloc(sizeof(struct ti_port), GFP_KERNEL); + tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL); if (tport == NULL) { dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); status = -ENOMEM; goto free_tports; } - memset(tport, 0, sizeof(struct ti_port)); spin_lock_init(&tport->tp_lock); tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 02c1aeb9e1b..b5541bf991b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -28,6 +28,7 @@ /* Vendor and product ids */ #define TI_VENDOR_ID 0x0451 #define TI_3410_PRODUCT_ID 0x3410 +#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ #define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 8006e51c34b..c1257d5292f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -952,32 +952,28 @@ probe_error: port = serial->port[i]; if (!port) continue; - if (port->read_urb) - usb_free_urb (port->read_urb); + usb_free_urb(port->read_urb); kfree(port->bulk_in_buffer); } for (i = 0; i < num_bulk_out; ++i) { port = serial->port[i]; if (!port) continue; - if (port->write_urb) - usb_free_urb (port->write_urb); + usb_free_urb(port->write_urb); kfree(port->bulk_out_buffer); } for (i = 0; i < num_interrupt_in; ++i) { port = serial->port[i]; if (!port) continue; - if (port->interrupt_in_urb) - usb_free_urb (port->interrupt_in_urb); + usb_free_urb(port->interrupt_in_urb); kfree(port->interrupt_in_buffer); } for (i = 0; i < num_interrupt_out; ++i) { port = serial->port[i]; if (!port) continue; - if (port->interrupt_out_urb) - usb_free_urb (port->interrupt_out_urb); + usb_free_urb(port->interrupt_out_urb); kfree(port->interrupt_out_buffer); } diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c new file mode 100644 index 00000000000..257a5e43687 --- /dev/null +++ b/drivers/usb/serial/usb_debug.c @@ -0,0 +1,65 @@ +/* + * USB Debug cable driver + * + * Copyright (C) 2006 Greg Kroah-Hartman <greg@kroah.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0x0525, 0x127a) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver debug_driver = { + .name = "debug", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver debug_device = { + .driver = { + .owner = THIS_MODULE, + .name = "debug", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, +}; + +static int __init debug_init(void) +{ + int retval; + + retval = usb_serial_register(&debug_device); + if (retval) + return retval; + retval = usb_register(&debug_driver); + if (retval) + usb_serial_deregister(&debug_device); + return retval; +} + +static void __exit debug_exit(void) +{ + usb_deregister(&debug_driver); + usb_serial_deregister(&debug_device); +} + +module_init(debug_init); +module_exit(debug_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index befe2e11a04..eef5eaa5fa0 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -348,8 +348,7 @@ static void visor_close (struct usb_serial_port *port, struct file * filp) /* shutdown our urbs */ usb_kill_urb(port->read_urb); - if (port->interrupt_in_urb) - usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); /* Try to send shutdown message, if the device is gone, this will just fail. */ transfer_buffer = kmalloc (0x12, GFP_KERNEL); |