diff options
Diffstat (limited to 'drivers/usb/serial')
| -rw-r--r-- | drivers/usb/serial/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/usb/serial/sierra.c | 35 |
2 files changed, 7 insertions, 35 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 8878c1767fc..70338f4ec91 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -499,9 +499,10 @@ config USB_SERIAL_SAFE_PADDED config USB_SERIAL_SIERRAWIRELESS tristate "USB Sierra Wireless Driver" help - Say M here if you want to use a Sierra Wireless device (if - using an PC 5220 or AC580 please use the Airprime driver - instead). + Say M here if you want to use Sierra Wireless devices. + + Many deviecs have a feature known as TRU-Install, for those devices + to work properly the USB Storage Sierra feature must be enabled. To compile this driver as a module, choose M here: the module will be called sierra. diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index e2a7463346f..6b7ed333386 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -14,7 +14,7 @@ Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> */ -#define DRIVER_VERSION "v.1.2.9c" +#define DRIVER_VERSION "v.1.2.13a" #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>" #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -31,6 +31,7 @@ #define SWIMS_USB_REQUEST_SetPower 0x00 #define SWIMS_USB_REQUEST_SetNmea 0x07 #define SWIMS_USB_REQUEST_SetMode 0x0B +#define SWIMS_USB_REQUEST_GetSwocInfo 0x0A #define SWIMS_SET_MODE_Modem 0x0001 /* per port private data */ @@ -40,13 +41,6 @@ static int debug; static int nmea; -static int truinstall = 1; - -enum devicetype { - DEVICE_3_PORT = 0, - DEVICE_1_PORT = 1, - DEVICE_INSTALLER = 2, -}; static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) { @@ -63,21 +57,6 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) return result; } -static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode) -{ - int result; - dev_dbg(&udev->dev, "%s", __func__); - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - SWIMS_USB_REQUEST_SetMode, /* __u8 request */ - USB_TYPE_VENDOR, /* __u8 request type */ - eSWocMode, /* __u16 value */ - 0x0000, /* __u16 index */ - NULL, /* void *data */ - 0, /* __u16 size */ - USB_CTRL_SET_TIMEOUT); /* int timeout */ - return result; -} - static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable) { int result; @@ -163,15 +142,8 @@ static int sierra_probe(struct usb_serial *serial, usb_set_interface(udev, ifnum, 1); } - /* Check if in installer mode */ - if (truinstall && id->driver_info == DEVICE_INSTALLER) { - dev_dbg(&udev->dev, "%s", "FOUND TRU-INSTALL DEVICE(SW)\n"); - result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem); - /* Don't bind to the device when in installer mode */ - kfree(num_ports); - return -EIO; /* Dummy interface present on some SKUs should be ignored */ - } else if (ifnum == 0x99) + if (ifnum == 0x99) *num_ports = 0; else if (numendpoints <= 3) *num_ports = 1; @@ -237,7 +209,6 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */ - { USB_DEVICE(0x1199, 0x0FFF), .driver_info = DEVICE_INSTALLER}, { } }; MODULE_DEVICE_TABLE(usb, id_table); |