diff options
Diffstat (limited to 'drivers/usb/serial')
37 files changed, 1363 insertions, 1096 deletions
diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old new file mode 100644 index 00000000000..c1b279939bb --- /dev/null +++ b/drivers/usb/serial/ChangeLog.old @@ -0,0 +1,730 @@ +This is the contents of some of the drivers/usb/serial/ files that had old +changelog comments. They were quite old, and out of date, and we don't keep +them anymore, so I've put them here, away from the source files, in case +people still care to see them. + +- Greg Kroah-Hartman <greg@kroah.com> October 20, 2005 + +----------------------------------------------------------------------- +usb-serial.h Change Log comments: + + (03/26/2002) gkh + removed the port->tty check from port_paranoia_check() due to serial + consoles not having a tty device assigned to them. + + (12/03/2001) gkh + removed active from the port structure. + added documentation to the usb_serial_device_type structure + + (10/10/2001) gkh + added vendor and product to serial structure. Needed to determine device + owner when the device is disconnected. + + (05/30/2001) gkh + added sem to port structure and removed port_lock + + (10/05/2000) gkh + Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help + fix bug with urb->dev not being set properly, now that the usb core + needs it. + + (09/11/2000) gkh + Added usb_serial_debug_data function to help get rid of #DEBUG in the + drivers. + + (08/28/2000) gkh + Added port_lock to port structure. + + (08/08/2000) gkh + Added open_count to port structure. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + +----------------------------------------------------------------------- +usb-serial.c Change Log comments: + + (12/10/2002) gkh + Split the ports off into their own struct device, and added a + usb-serial bus driver. + + (11/19/2002) gkh + removed a few #ifdefs for the generic code and cleaned up the failure + logic in initialization. + + (10/02/2002) gkh + moved the console code to console.c and out of this file. + + (06/05/2002) gkh + moved location of startup() call in serial_probe() until after all + of the port information and endpoints are initialized. This makes + things easier for some drivers. + + (04/10/2002) gkh + added serial_read_proc function which creates a + /proc/tty/driver/usb-serial file. + + (03/27/2002) gkh + Got USB serial console code working properly and merged into the main + version of the tree. Thanks to Randy Dunlap for the initial version + of this code, and for pushing me to finish it up. + The USB serial console works with any usb serial driver device. + + (03/21/2002) gkh + Moved all manipulation of port->open_count into the core. Now the + individual driver's open and close functions are called only when the + first open() and last close() is called. Making the drivers a bit + smaller and simpler. + Fixed a bug if a driver didn't have the owner field set. + + (02/26/2002) gkh + Moved all locking into the main serial_* functions, instead of having + the individual drivers have to grab the port semaphore. This should + reduce races. + Reworked the MOD_INC logic a bit to always increment and decrement, even + if the generic driver is being used. + + (10/10/2001) gkh + usb_serial_disconnect() now sets the serial->dev pointer is to NULL to + help prevent child drivers from accessing the device since it is now + gone. + + (09/13/2001) gkh + Moved generic driver initialize after we have registered with the USB + core. Thanks to Randy Dunlap for pointing this problem out. + + (07/03/2001) gkh + Fixed module paramater size. Thanks to John Brockmeyer for the pointer. + Fixed vendor and product getting defined through the MODULE_PARM macro + if the Generic driver wasn't compiled in. + Fixed problem with generic_shutdown() not being called for drivers that + don't have a shutdown() function. + + (06/06/2001) gkh + added evil hack that is needed for the prolific pl2303 device due to the + crazy way its endpoints are set up. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (04/08/2001) gb + Identify version on module load. + + 2001_02_05 gkh + Fixed buffer overflows bug with the generic serial driver. Thanks to + Todd Squires <squirest@ct0.com> for fixing this. + + (01/10/2001) gkh + Fixed bug where the generic serial adaptor grabbed _any_ device that was + offered to it. + + (12/12/2000) gkh + Removed MOD_INC and MOD_DEC from poll and disconnect functions, and + moved them to the serial_open and serial_close functions. + Also fixed bug with there not being a MOD_DEC for the generic driver + (thanks to Gary Brubaker for finding this.) + + (11/29/2000) gkh + Small NULL pointer initialization cleanup which saves a bit of disk image + + (11/01/2000) Adam J. Richter + instead of using idVendor/idProduct pairs, usb serial drivers + now identify their hardware interest with usb_device_id tables, + which they usually have anyhow for use with MODULE_DEVICE_TABLE. + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (08/28/2000) gkh + Added port_lock to port structure. + Added locks for SMP safeness to generic driver + Fixed the ability to open a generic device's port more than once. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + + (07/03/2000) gkh + Added more debugging to serial_ioctl call + + (06/25/2000) gkh + Changed generic_write_bulk_callback to not call wake_up_interruptible + directly, but to have port_softint do it at a safer time. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (05/22/2000) gkh + Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be + removed from the individual device source files. + + (05/03/2000) gkh + Added the Digi Acceleport driver from Al Borchers and Peter Berger. + + (05/02/2000) gkh + Changed devfs and tty register code to work properly now. This was based on + the ACM driver changes by Vojtech Pavlik. + + (04/27/2000) Ryan VanderBijl + Put calls to *_paranoia_checks into one function. + + (04/23/2000) gkh + Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. + Moved when the startup code printed out the devices that are supported. + + (04/19/2000) gkh + Added driver for ZyXEL omni.net lcd plus ISDN TA + Made startup info message specify which drivers were compiled in. + + (04/03/2000) gkh + Changed the probe process to remove the module unload races. + Changed where the tty layer gets initialized to have devfs work nicer. + Added initial devfs support. + + (03/26/2000) gkh + Split driver up into device specific pieces. + + (03/19/2000) gkh + Fixed oops that could happen when device was removed while a program + was talking to the device. + Removed the static urbs and now all urbs are created and destroyed + dynamically. + Reworked the internal interface. Now everything is based on the + usb_serial_port structure instead of the larger usb_serial structure. + This fixes the bug that a multiport device could not have more than + one port open at one time. + + (03/17/2000) gkh + Added config option for debugging messages. + Added patch for keyspan pda from Brian Warner. + + (03/06/2000) gkh + Added the keyspan pda code from Brian Warner <warner@lothar.com> + Moved a bunch of the port specific stuff into its own structure. This + is in anticipation of the true multiport devices (there's a bug if you + try to access more than one port of any multiport device right now) + + (02/21/2000) gkh + Made it so that any serial devices only have to specify which functions + they want to overload from the generic function calls (great, + inheritance in C, in a driver, just what I wanted...) + Added support for set_termios and ioctl function calls. No drivers take + advantage of this yet. + Removed the #ifdef MODULE, now there is no module specific code. + Cleaned up a few comments in usb-serial.h that were wrong (thanks again + to Miles Lott). + Small fix to get_free_serial. + + (02/14/2000) gkh + Removed the Belkin and Peracom functionality from the driver due to + the lack of support from the vendor, and me not wanting people to + accidenatly buy the device, expecting it to work with Linux. + Added read_bulk_callback and write_bulk_callback to the type structure + for the needs of the FTDI and WhiteHEAT driver. + Changed all reverences to FTDI to FTDI_SIO at the request of Bill + Ryder. + Changed the output urb size back to the max endpoint size to make + the ftdi_sio driver have it easier, and due to the fact that it didn't + really increase the speed any. + + (02/11/2000) gkh + Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a + patch from Miles Lott (milos@insync.net). + Fixed bug with not restoring the minor range that a device grabs, if + the startup function fails (thanks Miles for finding this). + + (02/05/2000) gkh + Added initial framework for the Keyspan PDA serial converter so that + Brian Warner has a place to put his code. + Made the ezusb specific functions generic enough that different + devices can use them (whiteheat and keyspan_pda both need them). + Split out a whole bunch of structure and other stuff to a separate + usb-serial.h file. + Made the Visor connection messages a little more understandable, now + that Miles Lott (milos@insync.net) has gotten the Generic channel to + work. Also made them always show up in the log file. + + (01/25/2000) gkh + Added initial framework for FTDI serial converter so that Bill Ryder + has a place to put his code. + Added the vendor specific info from Handspring. Now we can print out + informational debug messages as well as understand what is happening. + + (01/23/2000) gkh + Fixed problem of crash when trying to open a port that didn't have a + device assigned to it. Made the minor node finding a little smarter, + now it looks to find a continuous space for the new device. + + (01/21/2000) gkh + Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) + Fixed get_serial_by_minor which was all messed up for multi port + devices. Fixed multi port problem for generic devices. Now the number + of ports is determined by the number of bulk out endpoints for the + generic device. + + (01/19/2000) gkh + Removed lots of cruft that was around from the old (pre urb) driver + interface. + Made the serial_table dynamic. This should save lots of memory when + the number of minor nodes goes up to 256. + Added initial support for devices that have more than one port. + Added more debugging comments for the Visor, and added a needed + set_configuration call. + + (01/17/2000) gkh + Fixed the WhiteHEAT firmware (my processing tool had a bug) + and added new debug loader firmware for it. + Removed the put_char function as it isn't really needed. + Added visor startup commands as found by the Win98 dump. + + (01/13/2000) gkh + Fixed the vendor id for the generic driver to the one I meant it to be. + + (01/12/2000) gkh + Forget the version numbering...that's pretty useless... + Made the driver able to be compiled so that the user can select which + converter they want to use. This allows people who only want the Visor + support to not pay the memory size price of the WhiteHEAT. + Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) + grabbed the root hub. Not good. + + version 0.4.0 (01/10/2000) gkh + Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT + device. Added startup function to allow firmware to be downloaded to + a device if it needs to be. + Added firmware download logic to the WhiteHEAT device. + Started to add #defines to split up the different drivers for potential + configuration option. + + version 0.3.1 (12/30/99) gkh + Fixed problems with urb for bulk out. + Added initial support for multiple sets of endpoints. This enables + the Handspring Visor to be attached successfully. Only the first + bulk in / bulk out endpoint pair is being used right now. + + version 0.3.0 (12/27/99) gkh + Added initial support for the Handspring Visor based on a patch from + Miles Lott (milos@sneety.insync.net) + Cleaned up the code a bunch and converted over to using urbs only. + + version 0.2.3 (12/21/99) gkh + Added initial support for the Connect Tech WhiteHEAT converter. + Incremented the number of ports in expectation of getting the + WhiteHEAT to work properly (4 ports per connection). + Added notification on insertion and removal of what port the + device is/was connected to (and what kind of device it was). + + version 0.2.2 (12/16/99) gkh + Changed major number to the new allocated number. We're legal now! + + version 0.2.1 (12/14/99) gkh + Fixed bug that happens when device node is opened when there isn't a + device attached to it. Thanks to marek@webdesign.no for noticing this. + + version 0.2.0 (11/10/99) gkh + Split up internals to make it easier to add different types of serial + converters to the code. + Added a "generic" driver that gets it's vendor and product id + from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) + for the idea and sample code (from the usb scanner driver.) + Cleared up any licensing questions by releasing it under the GNU GPL. + + version 0.1.2 (10/25/99) gkh + Fixed bug in detecting device. + + version 0.1.1 (10/05/99) gkh + Changed the major number to not conflict with anything else. + + version 0.1 (09/28/99) gkh + Can recognize the two different devices and start up a read from + device when asked to. Writes also work. No control signals yet, this + all is vendor specific data (i.e. no spec), also no control for + different baud rates or other bit settings. + Currently we are using the same devid as the acm driver. This needs + to change. + +----------------------------------------------------------------------- +visor.c Change Log comments: + + (06/03/2003) Judd Montgomery <judd at jpilot.org> + Added support for module parameter options for untested/unknown + devices. + + (03/09/2003) gkh + Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl + <brachtl@redgrep.cz> for the information. + + (03/05/2003) gkh + Think Treo support is now working. + + (04/03/2002) gkh + Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI + <hiro@zob.ne.jp> for the information. + + (03/27/2002) gkh + Removed assumptions that port->tty was always valid (is not true + for usb serial console devices.) + + (03/23/2002) gkh + Added support for the Palm i705 device, thanks to Thomas Riemer + <tom@netmech.com> for the information. + + (03/21/2002) gkh + Added support for the Palm m130 device, thanks to Udo Eisenbarth + <udo.eisenbarth@web.de> for the information. + + (02/27/2002) gkh + Reworked the urb handling logic. We have no more pool, but dynamically + allocate the urb and the transfer buffer on the fly. In testing this + does not incure any measurable overhead. This also relies on the fact + that we have proper reference counting logic for urbs. + + (02/21/2002) SilaS + Added initial support for the Palm m515 devices. + + (02/14/2002) gkh + Added support for the Clie S-360 device. + + (12/18/2001) gkh + Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand + for the patch. + + (11/11/2001) gkh + Added support for the m125 devices, and added check to prevent oopses + for CliĆ© devices that lie about the number of ports they have. + + (08/30/2001) gkh + Added support for the Clie devices, both the 3.5 and 4.0 os versions. + Many thanks to Daniel Burke, and Bryan Payne for helping with this. + + (08/23/2001) gkh + fixed a few potential bugs pointed out by Oliver Neukum. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (05/28/2000) gkh + Added initial support for the Palm m500 and Palm m505 devices. + + (04/08/2001) gb + Identify version on module load. + + (01/21/2000) gkh + Added write_room and chars_in_buffer, as they were previously using the + generic driver versions which is all wrong now that we are using an urb + pool. Thanks to Wolfgang Grandegger for pointing this out to me. + Removed count assignment in the write function, which was not needed anymore + either. Thanks to Al Borchers for pointing this out. + + (12/12/2000) gkh + Moved MOD_DEC to end of visor_close to be nicer, as the final write + message can sleep. + + (11/12/2000) gkh + Fixed bug with data being dropped on the floor by forcing tty->low_latency + to be on. Hopefully this fixes the OHCI issue! + + (11/01/2000) Adam J. Richter + usb_device_id table support + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Got rid of always calling kmalloc for every urb we wrote out to the + device. + Added visor_read_callback so we can keep track of bytes in and out for + those people who like to know the speed of their device. + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (09/06/2000) gkh + Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ + the host controller drivers set urb->dev = NULL when the urb is finished. + + (08/28/2000) gkh + Added locks for SMP safeness. + + (08/08/2000) gkh + Fixed endian problem in visor_startup. + Fixed MOD_INC and MOD_DEC logic and the ability to open a port more + than once. + + (07/23/2000) gkh + Added pool of write urbs to speed up transfers to the visor. + + (07/19/2000) gkh + Added module_init and module_exit functions to handle the fact that this + driver is a loadable module now. + + (07/03/2000) gkh + Added visor_set_ioctl and visor_set_termios functions (they don't do much + of anything, but are good for debugging.) + + (06/25/2000) gkh + Fixed bug in visor_unthrottle that should help with the disconnect in PPP + bug that people have been reporting. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (04/27/2000) Ryan VanderBijl + Fixed memory leak in visor_close + + (03/26/2000) gkh + Split driver up into device specific pieces. + +----------------------------------------------------------------------- +pl2303.c Change Log comments: + + 2002_Mar_26 gkh + allowed driver to work properly if there is no tty assigned to a port + (this happens for serial console devices.) + + 2001_Oct_06 gkh + Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. + + 2001_Sep_19 gkh + Added break support. + + 2001_Aug_30 gkh + fixed oops in write_bulk_callback. + + 2001_Aug_28 gkh + reworked buffer logic to be like other usb-serial drivers. Hopefully + removing some reported problems. + + 2001_Jun_06 gkh + finished porting to 2.4 format. + + +----------------------------------------------------------------------- +io_edgeport.c Change Log comments: + + 2003_04_03 al borchers + - fixed a bug (that shows up with dosemu) where the tty struct is + used in a callback after it has been freed + + 2.3 2002_03_08 greg kroah-hartman + - fixed bug when multiple devices were attached at the same time. + + 2.2 2001_11_14 greg kroah-hartman + - fixed bug in edge_close that kept the port from being used more + than once. + - fixed memory leak on device removal. + - fixed potential double free of memory when command urb submitting + failed. + - other small cleanups when the device is removed + + 2.1 2001_07_09 greg kroah-hartman + - added support for TIOCMBIS and TIOCMBIC. + + (04/08/2001) gb + - Identify version on module load. + + 2.0 2001_03_05 greg kroah-hartman + - reworked entire driver to fit properly in with the other usb-serial + drivers. Occasional oopses still happen, but it's a good start. + + 1.2.3 (02/23/2001) greg kroah-hartman + - changed device table to work properly for 2.4.x final format. + - fixed problem with dropping data at high data rates. + + 1.2.2 (11/27/2000) greg kroah-hartman + - cleaned up more NTisms. + - Added device table for 2.4.0-test11 + + 1.2.1 (11/08/2000) greg kroah-hartman + - Started to clean up NTisms. + - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 + + 1.2 (10/17/2000) David Iacovelli + Remove all EPIC code and GPL source + Fix RELEVANT_IFLAG macro to include flow control + changes port configuration changes. + Fix redefinition of SERIAL_MAGIC + Change all timeout values to 5 seconds + Tried to fix the UHCI multiple urb submission, but failed miserably. + it seems to work fine with OHCI. + ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must + find a way to work arount this UHCI bug ) + + 1.1 (10/11/2000) David Iacovelli + Fix XON/XOFF flow control to support both IXON and IXOFF + + 0.9.27 (06/30/2000) David Iacovelli + Added transmit queue and now allocate urb for command writes. + + 0.9.26 (06/29/2000) David Iacovelli + Add support for 80251 based edgeport + + 0.9.25 (06/27/2000) David Iacovelli + Do not close the port if it has multiple opens. + + 0.9.24 (05/26/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + and first cut at running BlackBox Demo + + 0.9.23 (05/24/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + + 0.9.22 (05/23/2000) David Iacovelli + fixed bug in enumeration. If epconfig turns on mapping by + path after a device is already plugged in, we now update + the mapping correctly + + 0.9.21 (05/16/2000) David Iacovelli + Added BlockUntilChaseResp() to also wait for txcredits + Updated the way we allocate and handle write URBs + Add debug code to dump buffers + + 0.9.20 (05/01/2000) David Iacovelli + change driver to use usb/tts/ + + 0.9.19 (05/01/2000) David Iacovelli + Update code to compile if DEBUG is off + + 0.9.18 (04/28/2000) David Iacovelli + cleanup and test tty_register with devfs + + 0.9.17 (04/27/2000) greg kroah-hartman + changed tty_register around to be like the way it + was before, but now it works properly with devfs. + + 0.9.16 (04/26/2000) david iacovelli + Fixed bug in GetProductInfo() + + 0.9.15 (04/25/2000) david iacovelli + Updated enumeration + + 0.9.14 (04/24/2000) david iacovelli + Removed all config/status IOCTLS and + converted to using /proc/edgeport + still playing with devfs + + 0.9.13 (04/24/2000) david iacovelli + Removed configuration based on ttyUSB0 + Added support for configuration using /prod/edgeport + first attempt at using devfs (not working yet!) + Added IOCTL to GetProductInfo() + Added support for custom baud rates + Add support for random port numbers + + 0.9.12 (04/18/2000) david iacovelli + added additional configuration IOCTLs + use ttyUSB0 for configuration + + 0.9.11 (04/17/2000) greg kroah-hartman + fixed module initialization race conditions. + made all urbs dynamically allocated. + made driver devfs compatible. now it only registers the tty device + when the device is actually plugged in. + + 0.9.10 (04/13/2000) greg kroah-hartman + added proc interface framework. + + 0.9.9 (04/13/2000) david iacovelli + added enumeration code and ioctls to configure the device + + 0.9.8 (04/12/2000) david iacovelli + Change interrupt read start when device is plugged in + and stop when device is removed + process interrupt reads when all ports are closed + (keep value of rxBytesAvail consistent with the edgeport) + set the USB_BULK_QUEUE flag so that we can shove a bunch + of urbs at once down the pipe + + 0.9.7 (04/10/2000) david iacovelli + start to add enumeration code. + generate serial number for epic devices + add support for kdb + + 0.9.6 (03/30/2000) david iacovelli + add IOCTL to get string, manufacture, and boot descriptors + + 0.9.5 (03/14/2000) greg kroah-hartman + more error checking added to SerialOpen to try to fix UHCI open problem + + 0.9.4 (03/09/2000) greg kroah-hartman + added more error checking to handle oops when data is hanging + around and tty is abruptly closed. + + 0.9.3 (03/09/2000) david iacovelli + Add epic support for xon/xoff chars + play with performance + + 0.9.2 (03/08/2000) greg kroah-hartman + changed most "info" calls to "dbg" + implemented flow control properly in the termios call + + 0.9.1 (03/08/2000) david iacovelli + added EPIC support + enabled bootloader update + + 0.9 (03/08/2000) greg kroah-hartman + Release to IO networks. + Integrated changes that David made + made getting urbs for writing SMP safe + + 0.8 (03/07/2000) greg kroah-hartman + Release to IO networks. + Fixed problems that were seen in code by David. + Now both Edgeport/4 and Edgeport/2 works properly. + Changed most of the functions to use port instead of serial. + + 0.7 (02/27/2000) greg kroah-hartman + Milestone 3 release. + Release to IO Networks + ioctl for waiting on line change implemented. + ioctl for getting statistics implemented. + multiport support working. + lsr and msr registers are now handled properly. + change break now hooked up and working. + support for all known Edgeport devices. + + 0.6 (02/22/2000) greg kroah-hartman + Release to IO networks. + CHASE is implemented correctly when port is closed. + SerialOpen now blocks correctly until port is fully opened. + + 0.5 (02/20/2000) greg kroah-hartman + Release to IO networks. + Known problems: + modem status register changes are not sent on to the user + CHASE is not implemented when the port is closed. + + 0.4 (02/16/2000) greg kroah-hartman + Second cut at the CeBit demo. + Doesn't leak memory on every write to the port + Still small leaks on startup. + Added support for Edgeport/2 and Edgeport/8 + + 0.3 (02/15/2000) greg kroah-hartman + CeBit demo release. + Force the line settings to 4800, 8, 1, e for the demo. + Warning! This version leaks memory like crazy! + + 0.2 (01/30/2000) greg kroah-hartman + Milestone 1 release. + Device is found by USB subsystem, enumerated, fimware is downloaded + and the descriptors are printed to the debug log, config is set, and + green light starts to blink. Open port works, and data can be sent + and received at the default settings of the UART. Loopback connector + and debug log confirms this. + + 0.1 (01/23/2000) greg kroah-hartman + Initial release to help IO Networks try to set up their test system. + Edgeport4 is recognized, firmware is downloaded, config is set so + device blinks green light every 3 sec. Port is bound, but opening, + closing, and sending data do not work properly. + + diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 9438909e87a..7b5e8e4ee2b 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -394,6 +394,15 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. +config USB_SERIAL_NOKIA_DKU2 + tristate "USB Nokia DKU2 Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a Nokia DKU2 device. + + To compile this driver as a module, choose M here: the + module will be called nokia_dku2. + config USB_SERIAL_PL2303 tristate "USB Prolific 2303 Single Port Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 6c7cdcc99a9..55fd461793b 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o +obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 926d4c2c160..1f29d883732 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -30,9 +30,11 @@ static struct usb_driver airprime_driver = { .id_table = id_table, }; -static struct usb_serial_device_type airprime_device = { - .owner = THIS_MODULE, - .name = "airprime", +static struct usb_serial_driver airprime_device = { + .driver = { + .owner = THIS_MODULE, + .name = "airprime", + }, .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index abb1b2c543b..84bc0ee4f06 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -121,10 +121,12 @@ static struct usb_driver belkin_driver = { }; /* All of the device info needed for the serial converters */ -static struct usb_serial_device_type belkin_device = { - .owner = THIS_MODULE, - .name = "Belkin / Peracom / GoHubs USB Serial Adapter", - .short_name = "belkin", +static struct usb_serial_driver belkin_device = { + .driver = { + .owner = THIS_MODULE, + .name = "belkin", + }, + .description = "Belkin / Peracom / GoHubs USB Serial Adapter", .id_table = id_table_combined, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 2f612c2d894..664139afcfa 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -18,7 +18,7 @@ static int usb_serial_device_match (struct device *dev, struct device_driver *drv) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; const struct usb_serial_port *port; /* @@ -44,7 +44,7 @@ struct bus_type usb_serial_bus_type = { static int usb_serial_device_probe (struct device *dev) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; struct usb_serial_port *port; int retval = 0; int minor; @@ -57,13 +57,13 @@ static int usb_serial_device_probe (struct device *dev) driver = port->serial->type; if (driver->port_probe) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_probe (port); - module_put(driver->owner); + module_put(driver->driver.owner); if (retval) goto exit; } @@ -72,7 +72,7 @@ static int usb_serial_device_probe (struct device *dev) tty_register_device (usb_serial_tty_driver, minor, dev); dev_info(&port->serial->dev->dev, "%s converter now attached to ttyUSB%d\n", - driver->name, minor); + driver->description, minor); exit: return retval; @@ -80,7 +80,7 @@ exit: static int usb_serial_device_remove (struct device *dev) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; struct usb_serial_port *port; int retval = 0; int minor; @@ -92,43 +92,38 @@ static int usb_serial_device_remove (struct device *dev) driver = port->serial->type; if (driver->port_remove) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_remove (port); - module_put(driver->owner); + module_put(driver->driver.owner); } exit: minor = port->number; tty_unregister_device (usb_serial_tty_driver, minor); dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", - driver->name, minor); + driver->description, minor); return retval; } -int usb_serial_bus_register(struct usb_serial_device_type *device) +int usb_serial_bus_register(struct usb_serial_driver *driver) { int retval; - if (device->short_name) - device->driver.name = (char *)device->short_name; - else - device->driver.name = (char *)device->name; - device->driver.bus = &usb_serial_bus_type; - device->driver.probe = usb_serial_device_probe; - device->driver.remove = usb_serial_device_remove; - device->driver.owner = device->owner; + driver->driver.bus = &usb_serial_bus_type; + driver->driver.probe = usb_serial_device_probe; + driver->driver.remove = usb_serial_device_remove; - retval = driver_register(&device->driver); + retval = driver_register(&driver->driver); return retval; } -void usb_serial_bus_deregister(struct usb_serial_device_type *device) +void usb_serial_bus_deregister(struct usb_serial_driver *driver) { - driver_unregister (&device->driver); + driver_unregister(&driver->driver); } diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 97c78c21e8d..c5334dd89b1 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,15 +67,17 @@ MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver cp2101_driver = { .owner = THIS_MODULE, - .name = "CP2101", + .name = "cp2101", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; -static struct usb_serial_device_type cp2101_device = { - .owner = THIS_MODULE, - .name = "CP2101", +static struct usb_serial_driver cp2101_device = { + .driver = { + .owner = THIS_MODULE, + .name = "cp2101", + }, .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index b5b431067b0..e581e4ae848 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -83,10 +83,12 @@ static struct usb_driver cyberjack_driver = { .id_table = id_table, }; -static struct usb_serial_device_type cyberjack_device = { - .owner = THIS_MODULE, - .name = "Reiner SCT Cyberjack USB card reader", - .short_name = "cyberjack", +static struct usb_serial_driver cyberjack_device = { + .driver = { + .owner = THIS_MODULE, + .name = "cyberjack", + }, + .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 9ee1aaff2fc..af9290ed257 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -176,10 +176,12 @@ static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, u static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count); -static struct usb_serial_device_type cypress_earthmate_device = { - .owner = THIS_MODULE, - .name = "DeLorme Earthmate USB", - .short_name = "earthmate", +static struct usb_serial_driver cypress_earthmate_device = { + .driver = { + .owner = THIS_MODULE, + .name = "earthmate", + }, + .description = "DeLorme Earthmate USB", .id_table = id_table_earthmate, .num_interrupt_in = 1, .num_interrupt_out = 1, @@ -203,10 +205,12 @@ static struct usb_serial_device_type cypress_earthmate_device = { .write_int_callback = cypress_write_int_callback, }; -static struct usb_serial_device_type cypress_hidcom_device = { - .owner = THIS_MODULE, - .name = "HID->COM RS232 Adapter", - .short_name = "cyphidcom", +static struct usb_serial_driver cypress_hidcom_device = { + .driver = { + .owner = THIS_MODULE, + .name = "cyphidcom", + }, + .description = "HID->COM RS232 Adapter", .id_table = id_table_cyphidcomrs232, .num_interrupt_in = 1, .num_interrupt_out = 1, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index a19a47f6cf1..dc74644a603 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -503,10 +503,12 @@ static struct usb_driver digi_driver = { /* device info needed for the Digi serial converter */ -static struct usb_serial_device_type digi_acceleport_2_device = { - .owner = THIS_MODULE, - .name = "Digi 2 port USB adapter", - .short_name = "digi_2", +static struct usb_serial_driver digi_acceleport_2_device = { + .driver = { + .owner = THIS_MODULE, + .name = "digi_2", + }, + .description = "Digi 2 port USB adapter", .id_table = id_table_2, .num_interrupt_in = 0, .num_bulk_in = 4, @@ -530,10 +532,12 @@ static struct usb_serial_device_type digi_acceleport_2_device = { .shutdown = digi_shutdown, }; -static struct usb_serial_device_type digi_acceleport_4_device = { - .owner = THIS_MODULE, - .name = "Digi 4 port USB adapter", - .short_name = "digi_4", +static struct usb_serial_driver digi_acceleport_4_device = { + .driver = { + .owner = THIS_MODULE, + .name = "digi_4", + }, + .description = "Digi 4 port USB adapter", .id_table = id_table_4, .num_interrupt_in = 0, .num_bulk_in = 5, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 8d562ab454a..0b0546dcc7b 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -112,9 +112,11 @@ static struct usb_driver empeg_driver = { .id_table = id_table, }; -static struct usb_serial_device_type empeg_device = { - .owner = THIS_MODULE, - .name = "Empeg", +static struct usb_serial_driver empeg_device = { + .driver = { + .owner = THIS_MODULE, + .name = "empeg", + }, .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5a8631c8a4a..61204bf7cd7 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -411,6 +411,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, /* * These will probably use user-space drivers. Uncomment them if * you need them or use the user-specified vendor/product module @@ -428,7 +430,6 @@ static struct usb_device_id id_table_combined [] = { /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */ - /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */ @@ -471,6 +472,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -558,10 +562,12 @@ static unsigned short int ftdi_232am_baud_to_divisor (int baud); static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); -static struct usb_serial_device_type ftdi_sio_device = { - .owner = THIS_MODULE, - .name = "FTDI USB Serial Device", - .short_name = "ftdi_sio", +static struct usb_serial_driver ftdi_sio_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ftdi_sio", + }, + .description = "FTDI USB Serial Device", .id_table = id_table_combined, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 2c35d74cc6d..ddb63df31ce 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -199,6 +199,19 @@ #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ /* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Camera */ + +/* * Protego product ids */ #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ @@ -329,6 +342,9 @@ #define EVOLUTION_VID 0xDEEE /* Vendor ID */ #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 2ef614d5c8f..35820bda7ae 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1468,16 +1468,13 @@ static void garmin_shutdown (struct usb_serial *serial) } - - - - - /* All of the device info needed */ -static struct usb_serial_device_type garmin_device = { - .owner = THIS_MODULE, - .name = "Garmin GPS usb/tty", - .short_name = "garmin_gps", +static struct usb_serial_driver garmin_device = { + .driver = { + .owner = THIS_MODULE, + .name = "garmin_gps", + }, + .description = "Garmin GPS usb/tty", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 5f7d3193d35..8909208f506 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -36,10 +36,11 @@ MODULE_PARM_DESC(product, "User specified USB idProduct"); static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* All of the device info needed for the Generic Serial Converter */ -struct usb_serial_device_type usb_serial_generic_device = { - .owner = THIS_MODULE, - .name = "Generic", - .short_name = "generic", +struct usb_serial_driver usb_serial_generic_device = { + .driver = { + .owner = THIS_MODULE, + .name = "generic", + }, .id_table = generic_device_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 64d55fbd206..8eadfb70560 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -38,15 +38,17 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver hp49gp_driver = { .owner = THIS_MODULE, - .name = "HP4X", + .name = "hp4X", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; -static struct usb_serial_device_type hp49gp_device = { - .owner = THIS_MODULE, - .name = "HP4X", +static struct usb_serial_driver hp49gp_device = { + .driver = { + .owner = THIS_MODULE, + .name = "hp4X", + }, .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 04bfe279d76..dc4c498bd1e 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -27,225 +27,6 @@ * Networks technical support, or Peter Berger <pberger@brimson.com>, * or Al Borchers <alborchers@steinerpoint.com>. * - * Version history: - * - * 2003_04_03 al borchers - * - fixed a bug (that shows up with dosemu) where the tty struct is - * used in a callback after it has been freed - * - * 2.3 2002_03_08 greg kroah-hartman - * - fixed bug when multiple devices were attached at the same time. - * - * 2.2 2001_11_14 greg kroah-hartman - * - fixed bug in edge_close that kept the port from being used more - * than once. - * - fixed memory leak on device removal. - * - fixed potential double free of memory when command urb submitting - * failed. - * - other small cleanups when the device is removed - * - * 2.1 2001_07_09 greg kroah-hartman - * - added support for TIOCMBIS and TIOCMBIC. - * - * (04/08/2001) gb - * - Identify version on module load. - * - * 2.0 2001_03_05 greg kroah-hartman - * - reworked entire driver to fit properly in with the other usb-serial - * drivers. Occasional oopses still happen, but it's a good start. - * - * 1.2.3 (02/23/2001) greg kroah-hartman - * - changed device table to work properly for 2.4.x final format. - * - fixed problem with dropping data at high data rates. - * - * 1.2.2 (11/27/2000) greg kroah-hartman - * - cleaned up more NTisms. - * - Added device table for 2.4.0-test11 - * - * 1.2.1 (11/08/2000) greg kroah-hartman - * - Started to clean up NTisms. - * - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 - * - * 1.2 (10/17/2000) David Iacovelli - * Remove all EPIC code and GPL source - * Fix RELEVANT_IFLAG macro to include flow control - * changes port configuration changes. - * Fix redefinition of SERIAL_MAGIC - * Change all timeout values to 5 seconds - * Tried to fix the UHCI multiple urb submission, but failed miserably. - * it seems to work fine with OHCI. - * ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must - * find a way to work arount this UHCI bug ) - * - * 1.1 (10/11/2000) David Iacovelli - * Fix XON/XOFF flow control to support both IXON and IXOFF - * - * 0.9.27 (06/30/2000) David Iacovelli - * Added transmit queue and now allocate urb for command writes. - * - * 0.9.26 (06/29/2000) David Iacovelli - * Add support for 80251 based edgeport - * - * 0.9.25 (06/27/2000) David Iacovelli - * Do not close the port if it has multiple opens. - * - * 0.9.24 (05/26/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * and first cut at running BlackBox Demo - * - * 0.9.23 (05/24/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * - * 0.9.22 (05/23/2000) David Iacovelli - * fixed bug in enumeration. If epconfig turns on mapping by - * path after a device is already plugged in, we now update - * the mapping correctly - * - * 0.9.21 (05/16/2000) David Iacovelli - * Added BlockUntilChaseResp() to also wait for txcredits - * Updated the way we allocate and handle write URBs - * Add debug code to dump buffers - * - * 0.9.20 (05/01/2000) David Iacovelli - * change driver to use usb/tts/ - * - * 0.9.19 (05/01/2000) David Iacovelli - * Update code to compile if DEBUG is off - * - * 0.9.18 (04/28/2000) David Iacovelli - * cleanup and test tty_register with devfs - * - * 0.9.17 (04/27/2000) greg kroah-hartman - * changed tty_register around to be like the way it - * was before, but now it works properly with devfs. - * - * 0.9.16 (04/26/2000) david iacovelli - * Fixed bug in GetProductInfo() - * - * 0.9.15 (04/25/2000) david iacovelli - * Updated enumeration - * - * 0.9.14 (04/24/2000) david iacovelli - * Removed all config/status IOCTLS and - * converted to using /proc/edgeport - * still playing with devfs - * - * 0.9.13 (04/24/2000) david iacovelli - * Removed configuration based on ttyUSB0 - * Added support for configuration using /prod/edgeport - * first attempt at using devfs (not working yet!) - * Added IOCTL to GetProductInfo() - * Added support for custom baud rates - * Add support for random port numbers - * - * 0.9.12 (04/18/2000) david iacovelli - * added additional configuration IOCTLs - * use ttyUSB0 for configuration - * - * 0.9.11 (04/17/2000) greg kroah-hartman - * fixed module initialization race conditions. - * made all urbs dynamically allocated. - * made driver devfs compatible. now it only registers the tty device - * when the device is actually plugged in. - * - * 0.9.10 (04/13/2000) greg kroah-hartman - * added proc interface framework. - * - * 0.9.9 (04/13/2000) david iacovelli - * added enumeration code and ioctls to configure the device - * - * 0.9.8 (04/12/2000) david iacovelli - * Change interrupt read start when device is plugged in - * and stop when device is removed - * process interrupt reads when all ports are closed - * (keep value of rxBytesAvail consistent with the edgeport) - * set the USB_BULK_QUEUE flag so that we can shove a bunch - * of urbs at once down the pipe - * - * 0.9.7 (04/10/2000) david iacovelli - * start to add enumeration code. - * generate serial number for epic devices - * add support for kdb - * - * 0.9.6 (03/30/2000) david iacovelli - * add IOCTL to get string, manufacture, and boot descriptors - * - * 0.9.5 (03/14/2000) greg kroah-hartman - * more error checking added to SerialOpen to try to fix UHCI open problem - * - * 0.9.4 (03/09/2000) greg kroah-hartman - * added more error checking to handle oops when data is hanging - * around and tty is abruptly closed. - * - * 0.9.3 (03/09/2000) david iacovelli - * Add epic support for xon/xoff chars - * play with performance - * - * 0.9.2 (03/08/2000) greg kroah-hartman - * changed most "info" calls to "dbg" - * implemented flow control properly in the termios call - * - * 0.9.1 (03/08/2000) david iacovelli - * added EPIC support - * enabled bootloader update - * - * 0.9 (03/08/2000) greg kroah-hartman - * Release to IO networks. - * Integrated changes that David made - * made getting urbs for writing SMP safe - * - * 0.8 (03/07/2000) greg kroah-hartman - * Release to IO networks. - * Fixed problems that were seen in code by David. - * Now both Edgeport/4 and Edgeport/2 works properly. - * Changed most of the functions to use port instead of serial. - * - * 0.7 (02/27/2000) greg kroah-hartman - * Milestone 3 release. - * Release to IO Networks - * ioctl for waiting on line change implemented. - * ioctl for getting statistics implemented. - * multiport support working. - * lsr and msr registers are now handled properly. - * change break now hooked up and working. - * support for all known Edgeport devices. - * - * 0.6 (02/22/2000) greg kroah-hartman - * Release to IO networks. - * CHASE is implemented correctly when port is closed. - * SerialOpen now blocks correctly until port is fully opened. - * - * 0.5 (02/20/2000) greg kroah-hartman - * Release to IO networks. - * Known problems: - * modem status register changes are not sent on to the user - * CHASE is not implemented when the port is closed. - * - * 0.4 (02/16/2000) greg kroah-hartman - * Second cut at the CeBit demo. - * Doesn't leak memory on every write to the port - * Still small leaks on startup. - * Added support for Edgeport/2 and Edgeport/8 - * - * 0.3 (02/15/2000) greg kroah-hartman - * CeBit demo release. - * Force the line settings to 4800, 8, 1, e for the demo. - * Warning! This version leaks memory like crazy! - * - * 0.2 (01/30/2000) greg kroah-hartman - * Milestone 1 release. - * Device is found by USB subsystem, enumerated, fimware is downloaded - * and the descriptors are printed to the debug log, config is set, and - * green light starts to blink. Open port works, and data can be sent - * and received at the default settings of the UART. Loopback connector - * and debug log confirms this. - * - * 0.1 (01/23/2000) greg kroah-hartman - * Initial release to help IO Networks try to set up their test system. - * Edgeport4 is recognized, firmware is downloaded, config is set so - * device blinks green light every 3 sec. Port is bound, but opening, - * closing, and sending data do not work properly. - * */ #include <linux/config.h> diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index e7ffe02408b..fad561c04c7 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -75,10 +75,12 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); -static struct usb_serial_device_type edgeport_2port_device = { - .owner = THIS_MODULE, - .name = "Edgeport 2 port adapter", - .short_name = "edgeport_2", +static struct usb_serial_driver edgeport_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_2", + }, + .description = "Edgeport 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -103,10 +105,12 @@ static struct usb_serial_device_type edgeport_2port_device = { .write_bulk_callback = edge_bulk_out_data_callback, }; -static struct usb_serial_device_type edgeport_4port_device = { - .owner = THIS_MODULE, - .name = "Edgeport 4 port adapter", - .short_name = "edgeport_4", +static struct usb_serial_driver edgeport_4port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_4", + }, + .description = "Edgeport 4 port adapter", .id_table = edgeport_4port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -131,10 +135,12 @@ static struct usb_serial_device_type edgeport_4port_device = { .write_bulk_callback = edge_bulk_out_data_callback, }; -static struct usb_serial_device_type edgeport_8port_device = { - .owner = THIS_MODULE, - .name = "Edgeport 8 port adapter", - .short_name = "edgeport_8", +static struct usb_serial_driver edgeport_8port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_8", + }, + .description = "Edgeport 8 port adapter", .id_table = edgeport_8port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index ebf9967f7c8..832b6d6734c 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2982,10 +2982,12 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, } -static struct usb_serial_device_type edgeport_1port_device = { - .owner = THIS_MODULE, - .name = "Edgeport TI 1 port adapter", - .short_name = "edgeport_ti_1", +static struct usb_serial_driver edgeport_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_ti_1", + }, + .description = "Edgeport TI 1 port adapter", .id_table = edgeport_1port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -3010,10 +3012,12 @@ static struct usb_serial_device_type edgeport_1port_device = { .write_bulk_callback = edge_bulk_out_callback, }; -static struct usb_serial_device_type edgeport_2port_device = { - .owner = THIS_MODULE, - .name = "Edgeport TI 2 port adapter", - .short_name = "edgeport_ti_2", +static struct usb_serial_driver edgeport_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_ti_2", + }, + .description = "Edgeport TI 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index c05c2a2a0f3..d5d06648810 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -92,24 +92,7 @@ static void ipaq_destroy_lists(struct usb_serial_port *port); static struct usb_device_id ipaq_id_table [] = { /* The first entry is a placeholder for the insmod-specified device */ { USB_DEVICE(0x049F, 0x0003) }, - { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ - { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */ - { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */ - { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */ - { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */ - { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */ - { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */ - { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */ - { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */ - { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ { USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */ { USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */ { USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */ @@ -125,7 +108,13 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */ { USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */ { USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */ - { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ + { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */ + { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ + { USB_DEVICE(0x045E, 0x00CE) }, /* Microsoft USB Sync */ { USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */ { USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */ { USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */ @@ -251,17 +240,81 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */ { USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */ { USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */ - { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ - { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ - { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ + { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */ + { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ + { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ + { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ + { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ + { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ + { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ + { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */ + { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */ + { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */ + { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */ + { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */ + { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */ + { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */ + { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */ + { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */ + { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */ + { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */ + { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */ + { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ + { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */ + { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */ + { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */ + { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */ + { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */ + { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */ + { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */ + { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */ + { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */ + { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */ + { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ + { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */ + { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */ + { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */ { USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */ { USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */ + { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */ { USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */ { USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */ - { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */ { USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */ { USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */ { USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */ + { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ + { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */ + { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */ + { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */ + { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ + { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */ + { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */ + { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ { USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */ @@ -422,116 +475,67 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */ { USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */ { USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */ - { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */ - { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */ { USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */ - { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ - { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */ - { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */ - { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ { USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */ - { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ - { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ - { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ + { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ + { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ + { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ + { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ { USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */ { USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */ { USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */ { USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */ - { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ - { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ - { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ - { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ - { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ - { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ - { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ - { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ - { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ - { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ - { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ - { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ - { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ - { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ - { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ - { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */ - { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */ + { USB_DEVICE(0x1114, 0x0001) }, /* Psion Teklogix Sync 753x */ + { USB_DEVICE(0x1114, 0x0004) }, /* Psion Teklogix Sync netBookPro */ + { USB_DEVICE(0x1114, 0x0006) }, /* Psion Teklogix Sync 7525 */ + { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */ + { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */ + { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */ + { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ + { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */ + { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */ + { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */ + { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */ + { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */ + { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */ { USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */ { USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */ - { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */ - { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */ { USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */ - { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */ { USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */ - { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ + { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */ + { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ + { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ + { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ + { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */ { USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */ + { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ + { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */ + { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ + { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ { USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */ - { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ - { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ - { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ - { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ - { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */ - { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */ - { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */ - { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */ - { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */ - { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */ - { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */ - { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */ - { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */ - { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */ - { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */ - { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */ - { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */ - { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */ - { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */ - { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */ - { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */ - { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */ - { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */ - { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */ - { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */ - { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */ - { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */ - { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */ - { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */ - { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */ - { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */ - { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */ - { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */ - { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */ - { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */ - { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */ + { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ { } /* Terminating entry */ }; @@ -547,9 +551,12 @@ static struct usb_driver ipaq_driver = { /* All of the device info needed for the Compaq iPAQ */ -static struct usb_serial_device_type ipaq_device = { - .owner = THIS_MODULE, - .name = "PocketPC PDA", +static struct usb_serial_driver ipaq_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ipaq", + }, + .description = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 85e242459c2..a02fada8536 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -443,10 +443,12 @@ static int ipw_disconnect(struct usb_serial_port *port) return 0; } -static struct usb_serial_device_type ipw_device = { - .owner = THIS_MODULE, - .name = "IPWireless converter", - .short_name = "ipw", +static struct usb_serial_driver ipw_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ipw", + }, + .description = "IPWireless converter", .id_table = usb_ipw_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 937b2fdd717..19f329e9bdc 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -133,9 +133,12 @@ static struct usb_driver ir_driver = { }; -static struct usb_serial_device_type ir_device = { - .owner = THIS_MODULE, - .name = "IR Dongle", +static struct usb_serial_driver ir_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ir-usb", + }, + .description = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index e9b45b768ac..5cfc13b5e56 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -570,10 +570,12 @@ static struct usb_device_id keyspan_4port_ids[] = { }; /* Structs for the devices, pre and post renumeration. */ -static struct usb_serial_device_type keyspan_pre_device = { - .owner = THIS_MODULE, - .name = "Keyspan - (without firmware)", - .short_name = "keyspan_no_firm", +static struct usb_serial_driver keyspan_pre_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_no_firm", + }, + .description = "Keyspan - (without firmware)", .id_table = keyspan_pre_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -582,10 +584,12 @@ static struct usb_serial_device_type keyspan_pre_device = { .attach = keyspan_fake_startup, }; -static struct usb_serial_device_type keyspan_1port_device = { - .owner = THIS_MODULE, - .name = "Keyspan 1 port adapter", - .short_name = "keyspan_1", +static struct usb_serial_driver keyspan_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_1", + }, + .description = "Keyspan 1 port adapter", .id_table = keyspan_1port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -607,10 +611,12 @@ static struct usb_serial_device_type keyspan_1port_device = { .shutdown = keyspan_shutdown, }; -static struct usb_serial_device_type keyspan_2port_device = { - .owner = THIS_MODULE, - .name = "Keyspan 2 port adapter", - .short_name = "keyspan_2", +static struct usb_serial_driver keyspan_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_2", + }, + .description = "Keyspan 2 port adapter", .id_table = keyspan_2port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -632,10 +638,12 @@ static struct usb_serial_device_type keyspan_2port_device = { .shutdown = keyspan_shutdown, }; -static struct usb_serial_device_type keyspan_4port_device = { - .owner = THIS_MODULE, - .name = "Keyspan 4 port adapter", - .short_name = "keyspan_4", +static struct usb_serial_driver keyspan_4port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_4", + }, + .description = "Keyspan 4 port adapter", .id_table = keyspan_4port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 5, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 635c384cb15..cd4f48bd83b 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -783,10 +783,12 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) } #ifdef KEYSPAN -static struct usb_serial_device_type keyspan_pda_fake_device = { - .owner = THIS_MODULE, - .name = "Keyspan PDA - (prerenumeration)", - .short_name = "keyspan_pda_pre", +static struct usb_serial_driver keyspan_pda_fake_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_pda_pre", + }, + .description = "Keyspan PDA - (prerenumeration)", .id_table = id_table_fake, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -797,10 +799,12 @@ static struct usb_serial_device_type keyspan_pda_fake_device = { #endif #ifdef XIRCOM -static struct usb_serial_device_type xircom_pgs_fake_device = { - .owner = THIS_MODULE, - .name = "Xircom / Entregra PGS - (prerenumeration)", - .short_name = "xircom_no_firm", +static struct usb_serial_driver xircom_pgs_fake_device = { + .driver = { + .owner = THIS_MODULE, + .name = "xircom_no_firm", + }, + .description = "Xircom / Entregra PGS - (prerenumeration)", .id_table = id_table_fake_xircom, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -810,10 +814,12 @@ static struct usb_serial_device_type xircom_pgs_fake_device = { }; #endif -static struct usb_serial_device_type keyspan_pda_device = { - .owner = THIS_MODULE, - .name = "Keyspan PDA", - .short_name = "keyspan_pda", +static struct usb_serial_driver keyspan_pda_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_pda", + }, + .description = "Keyspan PDA", .id_table = id_table_std, .num_interrupt_in = 1, .num_bulk_in = 0, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a11e829e38c..a8951c0fd02 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -123,10 +123,12 @@ static struct usb_driver kl5kusb105d_driver = { .id_table = id_table, }; -static struct usb_serial_device_type kl5kusb105d_device = { - .owner = THIS_MODULE, - .name = "KL5KUSB105D / PalmConnect", - .short_name = "kl5kusb105d", +static struct usb_serial_driver kl5kusb105d_device = { + .driver = { + .owner = THIS_MODULE, + .name = "kl5kusb105d", + }, + .description = "KL5KUSB105D / PalmConnect", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index fe4c98a7517..9456dd9dd13 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -105,9 +105,12 @@ static struct usb_driver kobil_driver = { }; -static struct usb_serial_device_type kobil_device = { - .owner = THIS_MODULE, - .name = "KOBIL USB smart card terminal", +static struct usb_serial_driver kobil_device = { + .driver = { + .owner = THIS_MODULE, + .name = "kobil", + }, + .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 0, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 50b6369647d..ca5dbadb9b7 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -132,10 +132,12 @@ static struct usb_driver mct_u232_driver = { .id_table = id_table_combined, }; -static struct usb_serial_device_type mct_u232_device = { - .owner = THIS_MODULE, - .name = "MCT U232", - .short_name = "mct_u232", +static struct usb_serial_driver mct_u232_device = { + .driver = { + .owner = THIS_MODULE, + .name = "mct_u232", + }, + .description = "MCT U232", .id_table = id_table_combined, .num_interrupt_in = 2, .num_bulk_in = 0, diff --git a/drivers/usb/serial/nokia_dku2.c b/drivers/usb/serial/nokia_dku2.c new file mode 100644 index 00000000000..fad01bef3a6 --- /dev/null +++ b/drivers/usb/serial/nokia_dku2.c @@ -0,0 +1,142 @@ +/* + * Nokia DKU2 USB driver + * + * Copyright (C) 2004 + * Author: C Kemp + * + * This program is largely derived from work by the linux-usb group + * and associated source files. Please see the usb/serial files for + * individual credits and copyrights. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de> + * Added short name to device structure to make driver load into kernel 2.6.13 + * + * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de> + * Added usb_deregister to exit code - to allow remove and reinsert of module + */ + + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/usb.h> +#include "usb-serial.h" + + +#define NOKIA_VENDOR_ID 0x0421 +#define NOKIA7600_PRODUCT_ID 0x0400 +#define NOKIA6230_PRODUCT_ID 0x040f +#define NOKIA6170_PRODUCT_ID 0x0416 +#define NOKIA6670_PRODUCT_ID 0x041d +#define NOKIA6680_PRODUCT_ID 0x041e +#define NOKIA6230i_PRODUCT_ID 0x0428 + +#define NOKIA_AT_PORT 0x82 +#define NOKIA_FBUS_PORT 0x86 + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.2" +#define DRIVER_AUTHOR "C Kemp" +#define DRIVER_DESC "Nokia DKU2 Driver" + +static struct usb_device_id id_table [] = { + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* The only thing which makes this device different from a generic + * device is that we have to set an alternative configuration to make + * the relevant endpoints available. In 2.6 this is really easy... */ +static int nokia_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + int retval = -ENODEV; + + if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) { + /* the AT port */ + dev_info(&serial->dev->dev, "Nokia AT Port:\n"); + retval = 0; + } else if (serial->interface->num_altsetting == 2 && + serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) { + /* the FBUS port */ + dev_info(&serial->dev->dev, "Nokia FBUS Port:\n"); + usb_set_interface(serial->dev, 10, 1); + retval = 0; + } + + return retval; +} + +static struct usb_driver nokia_driver = { + .owner = THIS_MODULE, + .name = "nokia_dku2", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static struct usb_serial_driver nokia_serial_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "nokia_dku2", + }, + .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver", + .id_table = id_table, + .num_interrupt_in = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .probe = nokia_probe, +}; + +static int __init nokia_init(void) +{ + int retval; + + retval = usb_serial_register(&nokia_serial_driver); + if (retval) + return retval; + + retval = usb_register(&nokia_driver); + if (retval) { + usb_serial_deregister(&nokia_serial_driver); + return retval; + } + + info(DRIVER_VERSION " " DRIVER_AUTHOR); + info(DRIVER_DESC); + + return retval; +} + +static void __exit nokia_exit(void) +{ + usb_deregister(&nokia_driver); + usb_serial_deregister(&nokia_serial_driver); +} + +module_init(nokia_init); +module_exit(nokia_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 6a99ae192df..3caf97072ac 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -88,10 +88,12 @@ static struct usb_driver omninet_driver = { }; -static struct usb_serial_device_type zyxel_omninet_device = { - .owner = THIS_MODULE, - .name = "ZyXEL - omni.net lcd plus usb", - .short_name = "omninet", +static struct usb_serial_driver zyxel_omninet_device = { + .driver = { + .owner = THIS_MODULE, + .name = "omninet", + }, + .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4989e5740d1..7716000045b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -105,10 +105,12 @@ static struct usb_driver option_driver = { /* The card has three separate interfaces, wich the serial driver * recognizes separately, thus num_port=1. */ -static struct usb_serial_device_type option_3port_device = { - .owner = THIS_MODULE, - .name = "Option 3G data card", - .short_name = "option", +static struct usb_serial_driver option_3port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "option", + }, + .description = "Option 3G data card", .id_table = option_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 3cf245bdda5..165c119bf10 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -8,31 +8,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * 2002_Mar_26 gkh - * allowed driver to work properly if there is no tty assigned to a port - * (this happens for serial console devices.) - * - * 2001_Oct_06 gkh - * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. - * - * 2001_Sep_19 gkh - * Added break support. - * - * 2001_Aug_30 gkh - * fixed oops in write_bulk_callback. - * - * 2001_Aug_28 gkh - * reworked buffer logic to be like other usb-serial drivers. Hopefully - * removing some reported problems. - * - * 2001_Jun_06 gkh - * finished porting to 2.4 format. - * */ #include <linux/config.h> @@ -55,7 +34,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.12" #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" static int debug; @@ -175,9 +153,11 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, /* All of the device info needed for the PL2303 SIO serial converter */ -static struct usb_serial_device_type pl2303_device = { - .owner = THIS_MODULE, - .name = "PL-2303", +static struct usb_serial_driver pl2303_device = { + .driver = { + .owner = THIS_MODULE, + .name = "pl2303", + }, .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, @@ -1195,7 +1175,7 @@ static int __init pl2303_init (void) retval = usb_register(&pl2303_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: usb_serial_deregister(&pl2303_device); @@ -1215,7 +1195,6 @@ module_init(pl2303_init); module_exit(pl2303_exit); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 96a17568cbf..c22bdc0c4df 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -92,7 +92,7 @@ MODULE_DESCRIPTION (DRIVER_DESC); MODULE_LICENSE("GPL"); #if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT) -#abort "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT" +#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT" #endif #if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) @@ -397,9 +397,11 @@ static int safe_startup (struct usb_serial *serial) return 0; } -static struct usb_serial_device_type safe_device = { - .owner = THIS_MODULE, - .name = "Safe", +static struct usb_serial_driver safe_device = { + .driver = { + .owner = THIS_MODULE, + .name = "safe_serial", + }, .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 59c88de3e7a..205dbf7201d 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -255,9 +255,12 @@ static struct usb_driver ti_usb_driver = { .id_table = ti_id_table_combined, }; -static struct usb_serial_device_type ti_1port_device = { - .owner = THIS_MODULE, - .name = "TI USB 3410 1 port adapter", +static struct usb_serial_driver ti_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_1", + }, + .description = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -282,9 +285,12 @@ static struct usb_serial_device_type ti_1port_device = { .write_bulk_callback = ti_bulk_out_callback, }; -static struct usb_serial_device_type ti_2port_device = { - .owner = THIS_MODULE, - .name = "TI USB 5052 2 port adapter", +static struct usb_serial_driver ti_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_2", + }, + .description = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index e77fbdfc782..0c4881d18cd 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1,7 +1,7 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2000 Peter Berger (pberger@brimson.com) * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) * @@ -9,316 +9,11 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * - * This driver was originally based on the ACM driver by Armin Fuerst (which was + * This driver was originally based on the ACM driver by Armin Fuerst (which was * based on a driver by Brad Keryan) * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (12/10/2002) gkh - * Split the ports off into their own struct device, and added a - * usb-serial bus driver. - * - * (11/19/2002) gkh - * removed a few #ifdefs for the generic code and cleaned up the failure - * logic in initialization. - * - * (10/02/2002) gkh - * moved the console code to console.c and out of this file. - * - * (06/05/2002) gkh - * moved location of startup() call in serial_probe() until after all - * of the port information and endpoints are initialized. This makes - * things easier for some drivers. - * - * (04/10/2002) gkh - * added serial_read_proc function which creates a - * /proc/tty/driver/usb-serial file. - * - * (03/27/2002) gkh - * Got USB serial console code working properly and merged into the main - * version of the tree. Thanks to Randy Dunlap for the initial version - * of this code, and for pushing me to finish it up. - * The USB serial console works with any usb serial driver device. - * - * (03/21/2002) gkh - * Moved all manipulation of port->open_count into the core. Now the - * individual driver's open and close functions are called only when the - * first open() and last close() is called. Making the drivers a bit - * smaller and simpler. - * Fixed a bug if a driver didn't have the owner field set. - * - * (02/26/2002) gkh - * Moved all locking into the main serial_* functions, instead of having - * the individual drivers have to grab the port semaphore. This should - * reduce races. - * Reworked the MOD_INC logic a bit to always increment and decrement, even - * if the generic driver is being used. - * - * (10/10/2001) gkh - * usb_serial_disconnect() now sets the serial->dev pointer is to NULL to - * help prevent child drivers from accessing the device since it is now - * gone. - * - * (09/13/2001) gkh - * Moved generic driver initialize after we have registered with the USB - * core. Thanks to Randy Dunlap for pointing this problem out. - * - * (07/03/2001) gkh - * Fixed module paramater size. Thanks to John Brockmeyer for the pointer. - * Fixed vendor and product getting defined through the MODULE_PARM macro - * if the Generic driver wasn't compiled in. - * Fixed problem with generic_shutdown() not being called for drivers that - * don't have a shutdown() function. - * - * (06/06/2001) gkh - * added evil hack that is needed for the prolific pl2303 device due to the - * crazy way its endpoints are set up. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * 2001_02_05 gkh - * Fixed buffer overflows bug with the generic serial driver. Thanks to - * Todd Squires <squirest@ct0.com> for fixing this. - * - * (01/10/2001) gkh - * Fixed bug where the generic serial adaptor grabbed _any_ device that was - * offered to it. - * - * (12/12/2000) gkh - * Removed MOD_INC and MOD_DEC from poll and disconnect functions, and - * moved them to the serial_open and serial_close functions. - * Also fixed bug with there not being a MOD_DEC for the generic driver - * (thanks to Gary Brubaker for finding this.) - * - * (11/29/2000) gkh - * Small NULL pointer initialization cleanup which saves a bit of disk image - * - * (11/01/2000) Adam J. Richter - * instead of using idVendor/idProduct pairs, usb serial drivers - * now identify their hardware interest with usb_device_id tables, - * which they usually have anyhow for use with MODULE_DEVICE_TABLE. - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * Added locks for SMP safeness to generic driver - * Fixed the ability to open a generic device's port more than once. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * (07/03/2000) gkh - * Added more debugging to serial_ioctl call - * - * (06/25/2000) gkh - * Changed generic_write_bulk_callback to not call wake_up_interruptible - * directly, but to have port_softint do it at a safer time. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (05/22/2000) gkh - * Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be - * removed from the individual device source files. - * - * (05/03/2000) gkh - * Added the Digi Acceleport driver from Al Borchers and Peter Berger. - * - * (05/02/2000) gkh - * Changed devfs and tty register code to work properly now. This was based on - * the ACM driver changes by Vojtech Pavlik. - * - * (04/27/2000) Ryan VanderBijl - * Put calls to *_paranoia_checks into one function. - * - * (04/23/2000) gkh - * Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. - * Moved when the startup code printed out the devices that are supported. - * - * (04/19/2000) gkh - * Added driver for ZyXEL omni.net lcd plus ISDN TA - * Made startup info message specify which drivers were compiled in. - * - * (04/03/2000) gkh - * Changed the probe process to remove the module unload races. - * Changed where the tty layer gets initialized to have devfs work nicer. - * Added initial devfs support. - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * - * (03/19/2000) gkh - * Fixed oops that could happen when device was removed while a program - * was talking to the device. - * Removed the static urbs and now all urbs are created and destroyed - * dynamically. - * Reworked the internal interface. Now everything is based on the - * usb_serial_port structure instead of the larger usb_serial structure. - * This fixes the bug that a multiport device could not have more than - * one port open at one time. - * - * (03/17/2000) gkh - * Added config option for debugging messages. - * Added patch for keyspan pda from Brian Warner. - * - * (03/06/2000) gkh - * Added the keyspan pda code from Brian Warner <warner@lothar.com> - * Moved a bunch of the port specific stuff into its own structure. This - * is in anticipation of the true multiport devices (there's a bug if you - * try to access more than one port of any multiport device right now) - * - * (02/21/2000) gkh - * Made it so that any serial devices only have to specify which functions - * they want to overload from the generic function calls (great, - * inheritance in C, in a driver, just what I wanted...) - * Added support for set_termios and ioctl function calls. No drivers take - * advantage of this yet. - * Removed the #ifdef MODULE, now there is no module specific code. - * Cleaned up a few comments in usb-serial.h that were wrong (thanks again - * to Miles Lott). - * Small fix to get_free_serial. - * - * (02/14/2000) gkh - * Removed the Belkin and Peracom functionality from the driver due to - * the lack of support from the vendor, and me not wanting people to - * accidenatly buy the device, expecting it to work with Linux. - * Added read_bulk_callback and write_bulk_callback to the type structure - * for the needs of the FTDI and WhiteHEAT driver. - * Changed all reverences to FTDI to FTDI_SIO at the request of Bill - * Ryder. - * Changed the output urb size back to the max endpoint size to make - * the ftdi_sio driver have it easier, and due to the fact that it didn't - * really increase the speed any. - * - * (02/11/2000) gkh - * Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a - * patch from Miles Lott (milos@insync.net). - * Fixed bug with not restoring the minor range that a device grabs, if - * the startup function fails (thanks Miles for finding this). - * - * (02/05/2000) gkh - * Added initial framework for the Keyspan PDA serial converter so that - * Brian Warner has a place to put his code. - * Made the ezusb specific functions generic enough that different - * devices can use them (whiteheat and keyspan_pda both need them). - * Split out a whole bunch of structure and other stuff to a separate - * usb-serial.h file. - * Made the Visor connection messages a little more understandable, now - * that Miles Lott (milos@insync.net) has gotten the Generic channel to - * work. Also made them always show up in the log file. - * - * (01/25/2000) gkh - * Added initial framework for FTDI serial converter so that Bill Ryder - * has a place to put his code. - * Added the vendor specific info from Handspring. Now we can print out - * informational debug messages as well as understand what is happening. - * - * (01/23/2000) gkh - * Fixed problem of crash when trying to open a port that didn't have a - * device assigned to it. Made the minor node finding a little smarter, - * now it looks to find a continuous space for the new device. - * - * (01/21/2000) gkh - * Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) - * Fixed get_serial_by_minor which was all messed up for multi port - * devices. Fixed multi port problem for generic devices. Now the number - * of ports is determined by the number of bulk out endpoints for the - * generic device. - * - * (01/19/2000) gkh - * Removed lots of cruft that was around from the old (pre urb) driver - * interface. - * Made the serial_table dynamic. This should save lots of memory when - * the number of minor nodes goes up to 256. - * Added initial support for devices that have more than one port. - * Added more debugging comments for the Visor, and added a needed - * set_configuration call. - * - * (01/17/2000) gkh - * Fixed the WhiteHEAT firmware (my processing tool had a bug) - * and added new debug loader firmware for it. - * Removed the put_char function as it isn't really needed. - * Added visor startup commands as found by the Win98 dump. - * - * (01/13/2000) gkh - * Fixed the vendor id for the generic driver to the one I meant it to be. - * - * (01/12/2000) gkh - * Forget the version numbering...that's pretty useless... - * Made the driver able to be compiled so that the user can select which - * converter they want to use. This allows people who only want the Visor - * support to not pay the memory size price of the WhiteHEAT. - * Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) - * grabbed the root hub. Not good. - * - * version 0.4.0 (01/10/2000) gkh - * Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT - * device. Added startup function to allow firmware to be downloaded to - * a device if it needs to be. - * Added firmware download logic to the WhiteHEAT device. - * Started to add #defines to split up the different drivers for potential - * configuration option. - * - * version 0.3.1 (12/30/99) gkh - * Fixed problems with urb for bulk out. - * Added initial support for multiple sets of endpoints. This enables - * the Handspring Visor to be attached successfully. Only the first - * bulk in / bulk out endpoint pair is being used right now. - * - * version 0.3.0 (12/27/99) gkh - * Added initial support for the Handspring Visor based on a patch from - * Miles Lott (milos@sneety.insync.net) - * Cleaned up the code a bunch and converted over to using urbs only. - * - * version 0.2.3 (12/21/99) gkh - * Added initial support for the Connect Tech WhiteHEAT converter. - * Incremented the number of ports in expectation of getting the - * WhiteHEAT to work properly (4 ports per connection). - * Added notification on insertion and removal of what port the - * device is/was connected to (and what kind of device it was). - * - * version 0.2.2 (12/16/99) gkh - * Changed major number to the new allocated number. We're legal now! - * - * version 0.2.1 (12/14/99) gkh - * Fixed bug that happens when device node is opened when there isn't a - * device attached to it. Thanks to marek@webdesign.no for noticing this. - * - * version 0.2.0 (11/10/99) gkh - * Split up internals to make it easier to add different types of serial - * converters to the code. - * Added a "generic" driver that gets it's vendor and product id - * from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) - * for the idea and sample code (from the usb scanner driver.) - * Cleared up any licensing questions by releasing it under the GNU GPL. - * - * version 0.1.2 (10/25/99) gkh - * Fixed bug in detecting device. - * - * version 0.1.1 (10/05/99) gkh - * Changed the major number to not conflict with anything else. - * - * version 0.1 (09/28/99) gkh - * Can recognize the two different devices and start up a read from - * device when asked to. Writes also work. No control signals yet, this - * all is vendor specific data (i.e. no spec), also no control for - * different baud rates or other bit settings. - * Currently we are using the same devid as the acm driver. This needs - * to change. - * */ #include <linux/config.h> @@ -342,7 +37,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" #define DRIVER_DESC "USB Serial Driver core" @@ -427,7 +121,7 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); - dbg ("%s - %s", __FUNCTION__, serial->type->name); + dbg("%s - %s", __FUNCTION__, serial->type->description); serial->type->shutdown(serial); @@ -507,7 +201,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) /* lock this module before we call it * this may fail, which means we must bail out, * safe because we are called with BKL held */ - if (!try_module_get(serial->type->owner)) { + if (!try_module_get(serial->type->driver.owner)) { retval = -ENODEV; goto bailout_kref_put; } @@ -522,7 +216,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) return 0; bailout_module_put: - module_put(serial->type->owner); + module_put(serial->type->driver.owner); bailout_kref_put: kref_put(&serial->kref, destroy_serial); port->open_count = 0; @@ -553,7 +247,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp) port->tty = NULL; } - module_put(port->serial->type->owner); + module_put(port->serial->type->driver.owner); } kref_put(&port->serial->kref, destroy_serial); @@ -711,16 +405,16 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int char tmp[40]; dbg("%s", __FUNCTION__); - length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION); + length += sprintf (page, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { serial = usb_serial_get_by_index(i); if (serial == NULL) continue; length += sprintf (page+length, "%d:", i); - if (serial->type->owner) - length += sprintf (page+length, " module:%s", module_name(serial->type->owner)); - length += sprintf (page+length, " name:\"%s\"", serial->type->name); + if (serial->type->driver.owner) + length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); + length += sprintf (page+length, " name:\"%s\"", serial->type->description); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), le16_to_cpu(serial->dev->descriptor.idProduct)); @@ -823,7 +517,7 @@ static void port_release(struct device *dev) static struct usb_serial * create_serial (struct usb_device *dev, struct usb_interface *interface, - struct usb_serial_device_type *type) + struct usb_serial_driver *driver) { struct usb_serial *serial; @@ -834,22 +528,22 @@ static struct usb_serial * create_serial (struct usb_device *dev, } memset (serial, 0, sizeof(*serial)); serial->dev = usb_get_dev(dev); - serial->type = type; + serial->type = driver; serial->interface = interface; kref_init(&serial->kref); return serial; } -static struct usb_serial_device_type *search_serial_device(struct usb_interface *iface) +static struct usb_serial_driver *search_serial_device(struct usb_interface *iface) { struct list_head *p; const struct usb_device_id *id; - struct usb_serial_device_type *t; + struct usb_serial_driver *t; /* List trough know devices and see if the usb id matches */ list_for_each(p, &usb_serial_driver_list) { - t = list_entry(p, struct usb_serial_device_type, driver_list); + t = list_entry(p, struct usb_serial_driver, driver_list); id = usb_match_id(iface, t->id_table); if (id != NULL) { dbg("descriptor matches"); @@ -872,7 +566,7 @@ int usb_serial_probe(struct usb_interface *interface, struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; - struct usb_serial_device_type *type = NULL; + struct usb_serial_driver *type = NULL; int retval; int minor; int buffer_size; @@ -900,7 +594,7 @@ int usb_serial_probe(struct usb_interface *interface, if (type->probe) { const struct usb_device_id *id; - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; @@ -908,7 +602,7 @@ int usb_serial_probe(struct usb_interface *interface, id = usb_match_id(interface, type->id_table); retval = type->probe(serial, id); - module_put(type->owner); + module_put(type->driver.owner); if (retval) { dbg ("sub driver rejected device"); @@ -992,7 +686,7 @@ int usb_serial_probe(struct usb_interface *interface, #endif /* found all that we need */ - dev_info(&interface->dev, "%s converter detected\n", type->name); + dev_info(&interface->dev, "%s converter detected\n", type->description); #ifdef CONFIG_USB_SERIAL_GENERIC if (type == &usb_serial_generic_device) { @@ -1007,13 +701,13 @@ int usb_serial_probe(struct usb_interface *interface, if (!num_ports) { /* if this device type has a calc_num_ports function, call it */ if (type->calc_num_ports) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; } num_ports = type->calc_num_ports (serial); - module_put(type->owner); + module_put(type->driver.owner); } if (!num_ports) num_ports = type->num_ports; @@ -1158,12 +852,12 @@ int usb_serial_probe(struct usb_interface *interface, /* if this device type has an attach function, call it */ if (type->attach) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); goto probe_error; } retval = type->attach (serial); - module_put(type->owner); + module_put(type->driver.owner); if (retval < 0) goto probe_error; if (retval > 0) { @@ -1330,7 +1024,7 @@ static int __init usb_serial_init(void) goto exit_generic; } - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return result; @@ -1375,7 +1069,7 @@ module_exit(usb_serial_exit); } \ } while (0) -static void fixup_generic(struct usb_serial_device_type *device) +static void fixup_generic(struct usb_serial_driver *device) { set_to_generic_if_null(device, open); set_to_generic_if_null(device, write); @@ -1387,30 +1081,33 @@ static void fixup_generic(struct usb_serial_device_type *device) set_to_generic_if_null(device, shutdown); } -int usb_serial_register(struct usb_serial_device_type *new_device) +int usb_serial_register(struct usb_serial_driver *driver) { int retval; - fixup_generic(new_device); + fixup_generic(driver); + + if (!driver->description) + driver->description = driver->driver.name; /* Add this device to our list of devices */ - list_add(&new_device->driver_list, &usb_serial_driver_list); + list_add(&driver->driver_list, &usb_serial_driver_list); - retval = usb_serial_bus_register(new_device); + retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", retval, new_device->name); - list_del(&new_device->driver_list); + err("problem %d when registering driver %s", retval, driver->description); + list_del(&driver->driver_list); } else - info("USB Serial support registered for %s", new_device->name); + info("USB Serial support registered for %s", driver->description); return retval; } -void usb_serial_deregister(struct usb_serial_device_type *device) +void usb_serial_deregister(struct usb_serial_driver *device) { - info("USB Serial deregistering driver %s", device->name); + info("USB Serial deregistering driver %s", device->description); list_del(&device->driver_list); usb_serial_bus_deregister(device); } @@ -1429,7 +1126,6 @@ EXPORT_SYMBOL_GPL(usb_serial_port_softint); /* Module information */ MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_VERSION( DRIVER_VERSION ); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 57f92f054c7..238a5a871ed 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -1,53 +1,13 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 + * Copyright (C) 1999 - 2005 * Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * - * See Documentation/usb/usb-serial.txt for more information on using this driver - * - * (03/26/2002) gkh - * removed the port->tty check from port_paranoia_check() due to serial - * consoles not having a tty device assigned to them. - * - * (12/03/2001) gkh - * removed active from the port structure. - * added documentation to the usb_serial_device_type structure - * - * (10/10/2001) gkh - * added vendor and product to serial structure. Needed to determine device - * owner when the device is disconnected. - * - * (05/30/2001) gkh - * added sem to port structure and removed port_lock - * - * (10/05/2000) gkh - * Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help - * fix bug with urb->dev not being set properly, now that the usb core - * needs it. - * - * (09/11/2000) gkh - * Added usb_serial_debug_data function to help get rid of #DEBUG in the - * drivers. - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * - * (08/08/2000) gkh - * Added open_count to port structure. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * */ @@ -143,7 +103,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void /** * usb_serial - structure used by the usb-serial core for a device * @dev: pointer to the struct usb_device for this device - * @type: pointer to the struct usb_serial_device_type for this device + * @type: pointer to the struct usb_serial_driver for this device * @interface: pointer to the struct usb_interface for this device * @minor: the starting minor number for this device * @num_ports: the number of ports this device has @@ -159,7 +119,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void */ struct usb_serial { struct usb_device * dev; - struct usb_serial_device_type * type; + struct usb_serial_driver * type; struct usb_interface * interface; unsigned char minor; unsigned char num_ports; @@ -188,13 +148,9 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) } /** - * usb_serial_device_type - a structure that defines a usb serial device - * @owner: pointer to the module that owns this device. - * @name: pointer to a string that describes this device. This string used + * usb_serial_driver - describes a usb serial driver + * @description: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. - * @short_name: a pointer to a string that describes this device in - * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface - * to describe the driver. * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. * @num_interrupt_in: the number of interrupt in endpoints this device will @@ -221,16 +177,19 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * @shutdown: pointer to the driver's shutdown function. This will be * called when the device is removed from the system. * - * This structure is defines a USB Serial device. It provides all of + * This structure is defines a USB Serial driver. It provides all of * the information that the USB serial core code needs. If the function * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. + * + * The driver.owner field should be set to the module owner of this driver. + * The driver.name field should be set to the name of this driver (remember + * it will show up in sysfs, so it needs to be short and to the point. + * Useing the module name is a good idea.) */ -struct usb_serial_device_type { - struct module *owner; - char *name; - char *short_name; +struct usb_serial_driver { + const char *description; const struct usb_device_id *id_table; char num_interrupt_in; char num_interrupt_out; @@ -269,10 +228,10 @@ struct usb_serial_device_type { void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs); void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs); }; -#define to_usb_serial_driver(d) container_of(d, struct usb_serial_device_type, driver) +#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver) -extern int usb_serial_register(struct usb_serial_device_type *new_device); -extern void usb_serial_deregister(struct usb_serial_device_type *device); +extern int usb_serial_register(struct usb_serial_driver *driver); +extern void usb_serial_deregister(struct usb_serial_driver *driver); extern void usb_serial_port_softint(void *private); extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); @@ -303,10 +262,10 @@ extern void usb_serial_generic_shutdown (struct usb_serial *serial); extern int usb_serial_generic_register (int debug); extern void usb_serial_generic_deregister (void); -extern int usb_serial_bus_register (struct usb_serial_device_type *device); -extern void usb_serial_bus_deregister (struct usb_serial_device_type *device); +extern int usb_serial_bus_register (struct usb_serial_driver *device); +extern void usb_serial_bus_deregister (struct usb_serial_driver *device); -extern struct usb_serial_device_type usb_serial_generic_device; +extern struct usb_serial_driver usb_serial_generic_device; extern struct bus_type usb_serial_bus_type; extern struct tty_driver *usb_serial_tty_driver; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 31c57adcb62..a473c1c3455 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -7,139 +7,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (06/03/2003) Judd Montgomery <judd at jpilot.org> - * Added support for module parameter options for untested/unknown - * devices. - * - * (03/09/2003) gkh - * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl - * <brachtl@redgrep.cz> for the information. - * - * (03/05/2003) gkh - * Think Treo support is now working. - * - * (04/03/2002) gkh - * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI - * <hiro@zob.ne.jp> for the information. - * - * (03/27/2002) gkh - * Removed assumptions that port->tty was always valid (is not true - * for usb serial console devices.) - * - * (03/23/2002) gkh - * Added support for the Palm i705 device, thanks to Thomas Riemer - * <tom@netmech.com> for the information. - * - * (03/21/2002) gkh - * Added support for the Palm m130 device, thanks to Udo Eisenbarth - * <udo.eisenbarth@web.de> for the information. - * - * (02/27/2002) gkh - * Reworked the urb handling logic. We have no more pool, but dynamically - * allocate the urb and the transfer buffer on the fly. In testing this - * does not incure any measurable overhead. This also relies on the fact - * that we have proper reference counting logic for urbs. - * - * (02/21/2002) SilaS - * Added initial support for the Palm m515 devices. - * - * (02/14/2002) gkh - * Added support for the Clie S-360 device. - * - * (12/18/2001) gkh - * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand - * for the patch. - * - * (11/11/2001) gkh - * Added support for the m125 devices, and added check to prevent oopses - * for Clié devices that lie about the number of ports they have. - * - * (08/30/2001) gkh - * Added support for the Clie devices, both the 3.5 and 4.0 os versions. - * Many thanks to Daniel Burke, and Bryan Payne for helping with this. - * - * (08/23/2001) gkh - * fixed a few potential bugs pointed out by Oliver Neukum. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (05/28/2000) gkh - * Added initial support for the Palm m500 and Palm m505 devices. - * - * (04/08/2001) gb - * Identify version on module load. - * - * (01/21/2000) gkh - * Added write_room and chars_in_buffer, as they were previously using the - * generic driver versions which is all wrong now that we are using an urb - * pool. Thanks to Wolfgang Grandegger for pointing this out to me. - * Removed count assignment in the write function, which was not needed anymore - * either. Thanks to Al Borchers for pointing this out. - * - * (12/12/2000) gkh - * Moved MOD_DEC to end of visor_close to be nicer, as the final write - * message can sleep. - * - * (11/12/2000) gkh - * Fixed bug with data being dropped on the floor by forcing tty->low_latency - * to be on. Hopefully this fixes the OHCI issue! - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Got rid of always calling kmalloc for every urb we wrote out to the - * device. - * Added visor_read_callback so we can keep track of bytes in and out for - * those people who like to know the speed of their device. - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (09/06/2000) gkh - * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ - * the host controller drivers set urb->dev = NULL when the urb is finished. - * - * (08/28/2000) gkh - * Added locks for SMP safeness. - * - * (08/08/2000) gkh - * Fixed endian problem in visor_startup. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - * than once. - * - * (07/23/2000) gkh - * Added pool of write urbs to speed up transfers to the visor. - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * - * (07/03/2000) gkh - * Added visor_set_ioctl and visor_set_termios functions (they don't do much - * of anything, but are good for debugging.) - * - * (06/25/2000) gkh - * Fixed bug in visor_unthrottle that should help with the disconnect in PPP - * bug that people have been reporting. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (04/27/2000) Ryan VanderBijl - * Fixed memory leak in visor_close - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * */ #include <linux/config.h> @@ -161,7 +32,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.1" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>" #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" @@ -311,10 +181,12 @@ static struct usb_driver visor_driver = { }; /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ -static struct usb_serial_device_type handspring_device = { - .owner = THIS_MODULE, - .name = "Handspring Visor / Palm OS", - .short_name = "visor", +static struct usb_serial_driver handspring_device = { + .driver = { + .owner = THIS_MODULE, + .name = "visor", + }, + .description = "Handspring Visor / Palm OS", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -339,10 +211,12 @@ static struct usb_serial_device_type handspring_device = { }; /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ -static struct usb_serial_device_type clie_5_device = { - .owner = THIS_MODULE, - .name = "Sony Clie 5.0", - .short_name = "clie_5", +static struct usb_serial_driver clie_5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "clie_5", + }, + .description = "Sony Clie 5.0", .id_table = clie_id_5_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -367,10 +241,12 @@ static struct usb_serial_device_type clie_5_device = { }; /* device info for the Sony Clie OS version 3.5 */ -static struct usb_serial_device_type clie_3_5_device = { - .owner = THIS_MODULE, - .name = "Sony Clie 3.5", - .short_name = "clie_3.5", +static struct usb_serial_driver clie_3_5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "clie_3.5", + }, + .description = "Sony Clie 3.5", .id_table = clie_id_3_5_table, .num_interrupt_in = 0, .num_bulk_in = 1, @@ -782,7 +658,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i break; } dev_info(dev, "%s: port %d, is for %s use\n", - serial->type->name, + serial->type->description, connection_info->connections[i].port, string); } } @@ -791,11 +667,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i */ if (num_ports == 0 || num_ports > 2) { dev_warn (dev, "%s: No valid connect info available\n", - serial->type->name); + serial->type->description); num_ports = 2; } - dev_info(dev, "%s: Number of ports: %d\n", serial->type->name, + dev_info(dev, "%s: Number of ports: %d\n", serial->type->description, num_ports); /* @@ -1125,7 +1001,7 @@ static int __init visor_init (void) retval = usb_register(&visor_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index cf3bc30675a..18c3183be76 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -156,10 +156,12 @@ static void whiteheat_unthrottle (struct usb_serial_port *port); static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); -static struct usb_serial_device_type whiteheat_fake_device = { - .owner = THIS_MODULE, - .name = "Connect Tech - WhiteHEAT - (prerenumeration)", - .short_name = "whiteheatnofirm", +static struct usb_serial_driver whiteheat_fake_device = { + .driver = { + .owner = THIS_MODULE, + .name = "whiteheatnofirm", + }, + .description = "Connect Tech - WhiteHEAT - (prerenumeration)", .id_table = id_table_prerenumeration, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -169,10 +171,12 @@ static struct usb_serial_device_type whiteheat_fake_device = { .attach = whiteheat_firmware_attach, }; -static struct usb_serial_device_type whiteheat_device = { - .owner = THIS_MODULE, - .name = "Connect Tech - WhiteHEAT", - .short_name = "whiteheat", +static struct usb_serial_driver whiteheat_device = { + .driver = { + .owner = THIS_MODULE, + .name = "whiteheat", + }, + .description = "Connect Tech - WhiteHEAT", .id_table = id_table_std, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -382,10 +386,10 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't send command [%d]", serial->type->name, ret); + err("%s: Couldn't send command [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(command)) { - err("%s: Send command incomplete [%d]", serial->type->name, alen); + err("%s: Send command incomplete [%d]", serial->type->description, alen); goto no_firmware; } @@ -394,19 +398,19 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't get results [%d]", serial->type->name, ret); + err("%s: Couldn't get results [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(result)) { - err("%s: Get results incomplete [%d]", serial->type->name, alen); + err("%s: Get results incomplete [%d]", serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { - err("%s: Command failed [%d]", serial->type->name, result[0]); + err("%s: Command failed [%d]", serial->type->description, result[0]); goto no_firmware; } hw_info = (struct whiteheat_hw_info *)&result[1]; - info("%s: Driver %s: Firmware v%d.%02d", serial->type->name, + info("%s: Driver %s: Firmware v%d.%02d", serial->type->description, DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev); for (i = 0; i < serial->num_ports; i++) { @@ -414,7 +418,7 @@ static int whiteheat_attach (struct usb_serial *serial) info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); if (info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_private; } @@ -484,7 +488,7 @@ static int whiteheat_attach (struct usb_serial *serial) command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); if (command_info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_command_private; } @@ -501,9 +505,9 @@ static int whiteheat_attach (struct usb_serial *serial) no_firmware: /* Firmware likely not running */ - err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name); - err("%s: If the firmware is not running (status led not blinking)\n", serial->type->name); - err("%s: please contact support@connecttech.com\n", serial->type->name); + err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); + err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); + err("%s: please contact support@connecttech.com\n", serial->type->description); return -ENODEV; no_command_private: |