summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/Kconfig7
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/cp210x.c4
-rw-r--r--drivers/usb/serial/ftdi_sio.c31
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h34
-rw-r--r--drivers/usb/serial/keyspan.c2
-rw-r--r--drivers/usb/serial/mos7720.c21
-rw-r--r--drivers/usb/serial/mos7840.c175
-rw-r--r--drivers/usb/serial/option.c23
-rw-r--r--drivers/usb/serial/suunto.c41
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c11
-rw-r--r--drivers/usb/serial/usb_wwan.c20
12 files changed, 258 insertions, 112 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8c3a42ea910..7eef9b33fde 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -719,6 +719,13 @@ config USB_SERIAL_FLASHLOADER
To compile this driver as a module, choose M here: the
module will be called flashloader.
+config USB_SERIAL_SUUNTO
+ tristate "USB Suunto ANT+ driver"
+ help
+ Say Y here if you want to use the Suunto ANT+ USB device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called suunto.
config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index f7130114488..a14a870d993 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o
obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o
obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o
+obj-$(CONFIG_USB_SERIAL_SUUNTO) += suunto.o
obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o
obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index d6ef2f8da37..0eae4ba3760 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -53,6 +53,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+ { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
@@ -118,6 +119,8 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
@@ -148,6 +151,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7260ec66034..b65e657c641 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -735,9 +735,34 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
- { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
- { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
- { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29A_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29F_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S01_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29C_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_81B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_82B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5D_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K4Y_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5G_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S05_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_60_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_61_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_64_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_65_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92D_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_W5R_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_A5R_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_PW1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 6dd79253205..1b8af461b52 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -815,11 +815,35 @@
/*
* RT Systems programming cables for various ham radios
*/
-#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
-#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
-#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
-#define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */
-
+#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
+#define RTSYSTEMS_USB_S03_PID 0x9001 /* RTS-03 USB to Serial Adapter */
+#define RTSYSTEMS_USB_59_PID 0x9e50 /* USB-59 USB to 8 pin plug */
+#define RTSYSTEMS_USB_57A_PID 0x9e51 /* USB-57A USB to 4pin 3.5mm plug */
+#define RTSYSTEMS_USB_57B_PID 0x9e52 /* USB-57B USB to extended 4pin 3.5mm plug */
+#define RTSYSTEMS_USB_29A_PID 0x9e53 /* USB-29A USB to 3.5mm stereo plug */
+#define RTSYSTEMS_USB_29B_PID 0x9e54 /* USB-29B USB to 6 pin mini din */
+#define RTSYSTEMS_USB_29F_PID 0x9e55 /* USB-29F USB to 6 pin modular plug */
+#define RTSYSTEMS_USB_62B_PID 0x9e56 /* USB-62B USB to 8 pin mini din plug*/
+#define RTSYSTEMS_USB_S01_PID 0x9e57 /* USB-RTS01 USB to 3.5 mm stereo plug*/
+#define RTSYSTEMS_USB_63_PID 0x9e58 /* USB-63 USB to 9 pin female*/
+#define RTSYSTEMS_USB_29C_PID 0x9e59 /* USB-29C USB to 4 pin modular plug*/
+#define RTSYSTEMS_USB_81B_PID 0x9e5A /* USB-81 USB to 8 pin mini din plug*/
+#define RTSYSTEMS_USB_82B_PID 0x9e5B /* USB-82 USB to 2.5 mm stereo plug*/
+#define RTSYSTEMS_USB_K5D_PID 0x9e5C /* USB-K5D USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_K4Y_PID 0x9e5D /* USB-K4Y USB to 2.5/3.5 mm plugs*/
+#define RTSYSTEMS_USB_K5G_PID 0x9e5E /* USB-K5G USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_S05_PID 0x9e5F /* USB-RTS05 USB to 2.5 mm stereo plug*/
+#define RTSYSTEMS_USB_60_PID 0x9e60 /* USB-60 USB to 6 pin din*/
+#define RTSYSTEMS_USB_61_PID 0x9e61 /* USB-61 USB to 6 pin mini din*/
+#define RTSYSTEMS_USB_62_PID 0x9e62 /* USB-62 USB to 8 pin mini din*/
+#define RTSYSTEMS_USB_63B_PID 0x9e63 /* USB-63 USB to 9 pin female*/
+#define RTSYSTEMS_USB_64_PID 0x9e64 /* USB-64 USB to 9 pin male*/
+#define RTSYSTEMS_USB_65_PID 0x9e65 /* USB-65 USB to 9 pin female null modem*/
+#define RTSYSTEMS_USB_92_PID 0x9e66 /* USB-92 USB to 12 pin plug*/
+#define RTSYSTEMS_USB_92D_PID 0x9e67 /* USB-92D USB to 12 pin plug data*/
+#define RTSYSTEMS_USB_W5R_PID 0x9e68 /* USB-W5R USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_A5R_PID 0x9e69 /* USB-A5R USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_PW1_PID 0x9e6A /* USB-PW1 USB to 8 pin modular plug*/
/*
* Physik Instrumente
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 5a979729f8e..58c17fdc85e 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2303,7 +2303,7 @@ static int keyspan_startup(struct usb_serial *serial)
if (d_details == NULL) {
dev_err(&serial->dev->dev, "%s - unknown product id %x\n",
__func__, le16_to_cpu(serial->dev->descriptor.idProduct));
- return 1;
+ return -ENODEV;
}
/* Setup private data for serial driver */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 51da424327b..b01300164fc 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -90,6 +90,7 @@ struct urbtracker {
struct list_head urblist_entry;
struct kref ref_count;
struct urb *urb;
+ struct usb_ctrlrequest *setup;
};
enum mos7715_pp_modes {
@@ -271,6 +272,7 @@ static void destroy_urbtracker(struct kref *kref)
struct mos7715_parport *mos_parport = urbtrack->mos_parport;
usb_free_urb(urbtrack->urb);
+ kfree(urbtrack->setup);
kfree(urbtrack);
kref_put(&mos_parport->ref_count, destroy_mos_parport);
}
@@ -355,7 +357,6 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
struct urbtracker *urbtrack;
int ret_val;
unsigned long flags;
- struct usb_ctrlrequest setup;
struct usb_serial *serial = mos_parport->serial;
struct usb_device *usbdev = serial->dev;
@@ -373,14 +374,20 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
kfree(urbtrack);
return -ENOMEM;
}
- setup.bRequestType = (__u8)0x40;
- setup.bRequest = (__u8)0x0e;
- setup.wValue = get_reg_value(reg, dummy);
- setup.wIndex = get_reg_index(reg);
- setup.wLength = 0;
+ urbtrack->setup = kmalloc(sizeof(*urbtrack->setup), GFP_KERNEL);
+ if (!urbtrack->setup) {
+ usb_free_urb(urbtrack->urb);
+ kfree(urbtrack);
+ return -ENOMEM;
+ }
+ urbtrack->setup->bRequestType = (__u8)0x40;
+ urbtrack->setup->bRequest = (__u8)0x0e;
+ urbtrack->setup->wValue = get_reg_value(reg, dummy);
+ urbtrack->setup->wIndex = get_reg_index(reg);
+ urbtrack->setup->wLength = 0;
usb_fill_control_urb(urbtrack->urb, usbdev,
usb_sndctrlpipe(usbdev, 0),
- (unsigned char *)&setup,
+ (unsigned char *)urbtrack->setup,
NULL, 0, async_complete, urbtrack);
kref_init(&urbtrack->ref_count);
INIT_LIST_HEAD(&urbtrack->urblist_entry);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 0a818b23850..3bac4693c03 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -183,7 +183,10 @@
#define LED_ON_MS 500
#define LED_OFF_MS 500
-static int device_type;
+enum mos7840_flag {
+ MOS7840_FLAG_CTRL_BUSY,
+ MOS7840_FLAG_LED_BUSY,
+};
static const struct usb_device_id id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
@@ -238,9 +241,12 @@ struct moschip_port {
/* For device(s) with LED indicator */
bool has_led;
- bool led_flag;
struct timer_list led_timer1; /* Timer for LED on */
struct timer_list led_timer2; /* Timer for LED off */
+ struct urb *led_urb;
+ struct usb_ctrlrequest *led_dr;
+
+ unsigned long flags;
};
/*
@@ -460,10 +466,10 @@ static void mos7840_control_callback(struct urb *urb)
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
- return;
+ goto out;
default:
dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
- return;
+ goto out;
}
dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
@@ -476,6 +482,8 @@ static void mos7840_control_callback(struct urb *urb)
mos7840_handle_new_msr(mos7840_port, regval);
else if (mos7840_port->MsrLsr == 1)
mos7840_handle_new_lsr(mos7840_port, regval);
+out:
+ clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mos7840_port->flags);
}
static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
@@ -486,6 +494,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
unsigned char *buffer = mcs->ctrl_buf;
int ret;
+ if (test_and_set_bit_lock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags))
+ return -EBUSY;
+
dr->bRequestType = MCS_RD_RTYPE;
dr->bRequest = MCS_RDREQ;
dr->wValue = cpu_to_le16(Wval); /* 0 */
@@ -497,6 +508,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
mos7840_control_callback, mcs);
mcs->control_urb->transfer_buffer_length = 2;
ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
+ if (ret)
+ clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags);
+
return ret;
}
@@ -523,7 +537,7 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval,
__u16 reg)
{
struct usb_device *dev = mcs->port->serial->dev;
- struct usb_ctrlrequest *dr = mcs->dr;
+ struct usb_ctrlrequest *dr = mcs->led_dr;
dr->bRequestType = MCS_WR_RTYPE;
dr->bRequest = MCS_WRREQ;
@@ -531,10 +545,10 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval,
dr->wIndex = cpu_to_le16(reg);
dr->wLength = cpu_to_le16(0);
- usb_fill_control_urb(mcs->control_urb, dev, usb_sndctrlpipe(dev, 0),
+ usb_fill_control_urb(mcs->led_urb, dev, usb_sndctrlpipe(dev, 0),
(unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL);
- usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
+ usb_submit_urb(mcs->led_urb, GFP_ATOMIC);
}
static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg,
@@ -560,7 +574,19 @@ static void mos7840_led_flag_off(unsigned long arg)
{
struct moschip_port *mcs = (struct moschip_port *) arg;
- mcs->led_flag = false;
+ clear_bit_unlock(MOS7840_FLAG_LED_BUSY, &mcs->flags);
+}
+
+static void mos7840_led_activity(struct usb_serial_port *port)
+{
+ struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+
+ if (test_and_set_bit_lock(MOS7840_FLAG_LED_BUSY, &mos7840_port->flags))
+ return;
+
+ mos7840_set_led_async(mos7840_port, 0x0301, MODEM_CONTROL_REGISTER);
+ mod_timer(&mos7840_port->led_timer1,
+ jiffies + msecs_to_jiffies(LED_ON_MS));
}
/*****************************************************************************
@@ -758,14 +784,8 @@ static void mos7840_bulk_in_callback(struct urb *urb)
return;
}
- /* Turn on LED */
- if (mos7840_port->has_led && !mos7840_port->led_flag) {
- mos7840_port->led_flag = true;
- mos7840_set_led_async(mos7840_port, 0x0301,
- MODEM_CONTROL_REGISTER);
- mod_timer(&mos7840_port->led_timer1,
- jiffies + msecs_to_jiffies(LED_ON_MS));
- }
+ if (mos7840_port->has_led)
+ mos7840_led_activity(port);
mos7840_port->read_urb_busy = true;
retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
@@ -816,18 +836,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
/************************************************************************/
/* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */
/************************************************************************/
-#ifdef MCSSerialProbe
-static int mos7840_serial_probe(struct usb_serial *serial,
- const struct usb_device_id *id)
-{
-
- /*need to implement the mode_reg reading and updating\
- structures usb_serial_ device_type\
- (i.e num_ports, num_bulkin,bulkout etc) */
- /* Also we can update the changes attach */
- return 1;
-}
-#endif
/*****************************************************************************
* mos7840_open
@@ -905,20 +913,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
if (status < 0) {
dev_dbg(&port->dev, "Reading Spreg failed\n");
- return -1;
+ goto err;
}
Data |= 0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "writing Spreg failed\n");
- return -1;
+ goto err;
}
Data &= ~0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "writing Spreg failed\n");
- return -1;
+ goto err;
}
/* End of block to be checked */
@@ -927,7 +935,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
&Data);
if (status < 0) {
dev_dbg(&port->dev, "Reading Controlreg failed\n");
- return -1;
+ goto err;
}
Data |= 0x08; /* Driver done bit */
Data |= 0x20; /* rx_disable */
@@ -935,7 +943,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "writing Controlreg failed\n");
- return -1;
+ goto err;
}
/* do register settings here */
/* Set all regs to the device default values. */
@@ -946,21 +954,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "disabling interrupts failed\n");
- return -1;
+ goto err;
}
/* Set FIFO_CONTROL_REGISTER to the default value */
Data = 0x00;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
- return -1;
+ goto err;
}
Data = 0xcf;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
- return -1;
+ goto err;
}
Data = 0x03;
@@ -1103,6 +1111,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
/* mos7840_change_port_settings(mos7840_port,old_termios); */
return 0;
+err:
+ for (j = 0; j < NUM_URBS; ++j) {
+ urb = mos7840_port->write_urb_pool[j];
+ if (!urb)
+ continue;
+ kfree(urb->transfer_buffer);
+ usb_free_urb(urb);
+ }
+ return status;
}
/*****************************************************************************
@@ -1445,13 +1462,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
data1 = urb->transfer_buffer;
dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
- /* Turn on LED */
- if (mos7840_port->has_led && !mos7840_port->led_flag) {
- mos7840_port->led_flag = true;
- mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0301);
- mod_timer(&mos7840_port->led_timer1,
- jiffies + msecs_to_jiffies(LED_ON_MS));
- }
+ if (mos7840_port->has_led)
+ mos7840_led_activity(port);
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
@@ -2178,38 +2190,48 @@ static int mos7810_check(struct usb_serial *serial)
return 0;
}
-static int mos7840_calc_num_ports(struct usb_serial *serial)
+static int mos7840_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
{
- __u16 data = 0x00;
+ u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
u8 *buf;
- int mos7840_num_ports;
+ int device_type;
+
+ if (product == MOSCHIP_DEVICE_ID_7810 ||
+ product == MOSCHIP_DEVICE_ID_7820) {
+ device_type = product;
+ goto out;
+ }
buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
- if (buf) {
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ if (!buf)
+ return -ENOMEM;
+
+ usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
- data = *buf;
- kfree(buf);
- }
- if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
- serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
- device_type = serial->dev->descriptor.idProduct;
- } else {
- /* For a MCS7840 device GPIO0 must be set to 1 */
- if ((data & 0x01) == 1)
- device_type = MOSCHIP_DEVICE_ID_7840;
- else if (mos7810_check(serial))
- device_type = MOSCHIP_DEVICE_ID_7810;
- else
- device_type = MOSCHIP_DEVICE_ID_7820;
- }
+ /* For a MCS7840 device GPIO0 must be set to 1 */
+ if (buf[0] & 0x01)
+ device_type = MOSCHIP_DEVICE_ID_7840;
+ else if (mos7810_check(serial))
+ device_type = MOSCHIP_DEVICE_ID_7810;
+ else
+ device_type = MOSCHIP_DEVICE_ID_7820;
+
+ kfree(buf);
+out:
+ usb_set_serial_data(serial, (void *)(unsigned long)device_type);
+
+ return 0;
+}
+
+static int mos7840_calc_num_ports(struct usb_serial *serial)
+{
+ int device_type = (unsigned long)usb_get_serial_data(serial);
+ int mos7840_num_ports;
mos7840_num_ports = (device_type >> 4) & 0x000F;
- serial->num_bulk_in = mos7840_num_ports;
- serial->num_bulk_out = mos7840_num_ports;
- serial->num_ports = mos7840_num_ports;
return mos7840_num_ports;
}
@@ -2217,6 +2239,7 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
static int mos7840_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
+ int device_type = (unsigned long)usb_get_serial_data(serial);
struct moschip_port *mos7840_port;
int status;
int pnum;
@@ -2392,6 +2415,14 @@ static int mos7840_port_probe(struct usb_serial_port *port)
if (device_type == MOSCHIP_DEVICE_ID_7810) {
mos7840_port->has_led = true;
+ mos7840_port->led_urb = usb_alloc_urb(0, GFP_KERNEL);
+ mos7840_port->led_dr = kmalloc(sizeof(*mos7840_port->led_dr),
+ GFP_KERNEL);
+ if (!mos7840_port->led_urb || !mos7840_port->led_dr) {
+ status = -ENOMEM;
+ goto error;
+ }
+
init_timer(&mos7840_port->led_timer1);
mos7840_port->led_timer1.function = mos7840_led_off;
mos7840_port->led_timer1.expires =
@@ -2404,8 +2435,6 @@ static int mos7840_port_probe(struct usb_serial_port *port)
jiffies + msecs_to_jiffies(LED_OFF_MS);
mos7840_port->led_timer2.data = (unsigned long)mos7840_port;
- mos7840_port->led_flag = false;
-
/* Turn off LED */
mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
}
@@ -2427,6 +2456,8 @@ out:
}
return 0;
error:
+ kfree(mos7840_port->led_dr);
+ usb_free_urb(mos7840_port->led_urb);
kfree(mos7840_port->dr);
kfree(mos7840_port->ctrl_buf);
usb_free_urb(mos7840_port->control_urb);
@@ -2447,6 +2478,10 @@ static int mos7840_port_remove(struct usb_serial_port *port)
del_timer_sync(&mos7840_port->led_timer1);
del_timer_sync(&mos7840_port->led_timer2);
+
+ usb_kill_urb(mos7840_port->led_urb);
+ usb_free_urb(mos7840_port->led_urb);
+ kfree(mos7840_port->led_dr);
}
usb_kill_urb(mos7840_port->control_urb);
usb_free_urb(mos7840_port->control_urb);
@@ -2473,9 +2508,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
.throttle = mos7840_throttle,
.unthrottle = mos7840_unthrottle,
.calc_num_ports = mos7840_calc_num_ports,
-#ifdef MCSSerialProbe
- .probe = mos7840_serial_probe,
-#endif
+ .probe = mos7840_probe,
.ioctl = mos7840_ioctl,
.set_termios = mos7840_set_termios,
.break_ctl = mos7840_break,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5dd857de05b..1cf6f125f5f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -341,17 +341,12 @@ static void option_instat_callback(struct urb *urb);
#define OLIVETTI_VENDOR_ID 0x0b3c
#define OLIVETTI_PRODUCT_OLICARD100 0xc000
#define OLIVETTI_PRODUCT_OLICARD145 0xc003
+#define OLIVETTI_PRODUCT_OLICARD200 0xc005
/* Celot products */
#define CELOT_VENDOR_ID 0x211f
#define CELOT_PRODUCT_CT680M 0x6801
-/* ONDA Communication vendor id */
-#define ONDA_VENDOR_ID 0x1ee8
-
-/* ONDA MT825UP HSDPA 14.2 modem */
-#define ONDA_MT825UP 0x000b
-
/* Samsung products */
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_GT_B3730 0x6889
@@ -444,7 +439,8 @@ static void option_instat_callback(struct urb *urb);
/* Hyundai Petatel Inc. products */
#define PETATEL_VENDOR_ID 0x1ff4
-#define PETATEL_PRODUCT_NP10T 0x600e
+#define PETATEL_PRODUCT_NP10T_600A 0x600a
+#define PETATEL_PRODUCT_NP10T_600E 0x600e
/* TP-LINK Incorporated products */
#define TPLINK_VENDOR_ID 0x2357
@@ -782,6 +778,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
@@ -817,7 +814,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
@@ -1256,8 +1254,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
+ { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },
@@ -1329,9 +1327,12 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
- { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+ { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
+ { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE(TPLINK_VENDOR_ID, 0x9000), /* TP-Link MA260 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) }, /* D-Link DWM-156 (variant) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) }, /* D-Link DWM-156 (variant) */
@@ -1339,6 +1340,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/suunto.c b/drivers/usb/serial/suunto.c
new file mode 100644
index 00000000000..2248e7a7d5a
--- /dev/null
+++ b/drivers/usb/serial/suunto.c
@@ -0,0 +1,41 @@
+/*
+ * Suunto ANT+ USB Driver
+ *
+ * Copyright (C) 2013 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+ * Copyright (C) 2013 Linux Foundation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation only.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x0fcf, 0x1008) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver suunto_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = KBUILD_MODNAME,
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &suunto_device,
+ NULL,
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 7182bb774b7..5c9f9b1d773 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -371,7 +371,7 @@ static int ti_startup(struct usb_serial *serial)
usb_set_serial_data(serial, tdev);
/* determine device type */
- if (usb_match_id(serial->interface, ti_id_table_3410))
+ if (serial->type == &ti_1port_device)
tdev->td_is_3410 = 1;
dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
tdev->td_is_3410 ? "3410" : "5052");
@@ -1536,14 +1536,15 @@ static int ti_download_firmware(struct ti_device *tdev)
char buf[32];
/* try ID specific firmware first, then try generic firmware */
- sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
- dev->descriptor.idProduct);
+ sprintf(buf, "ti_usb-v%04x-p%04x.fw",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
status = request_firmware(&fw_p, buf, &dev->dev);
if (status != 0) {
buf[0] = '\0';
- if (dev->descriptor.idVendor == MTS_VENDOR_ID) {
- switch (dev->descriptor.idProduct) {
+ if (le16_to_cpu(dev->descriptor.idVendor) == MTS_VENDOR_ID) {
+ switch (le16_to_cpu(dev->descriptor.idProduct)) {
case MTS_CDMA_PRODUCT_ID:
strcpy(buf, "mts_cdma.fw");
break;
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 8257d30c407..85365784040 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -291,18 +291,18 @@ static void usb_wwan_indat_callback(struct urb *urb)
tty_flip_buffer_push(&port->port);
} else
dev_dbg(dev, "%s: empty read urb received\n", __func__);
-
- /* Resubmit urb so we continue receiving */
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err) {
- if (err != -EPERM) {
- dev_err(dev, "%s: resubmit read urb failed. (%d)\n", __func__, err);
- /* busy also in error unless we are killed */
- usb_mark_last_busy(port->serial->dev);
- }
- } else {
+ }
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err) {
+ if (err != -EPERM) {
+ dev_err(dev, "%s: resubmit read urb failed. (%d)\n",
+ __func__, err);
+ /* busy also in error unless we are killed */
usb_mark_last_busy(port->serial->dev);
}
+ } else {
+ usb_mark_last_busy(port->serial->dev);
}
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-13 16:37:47 +0000