diff options
Diffstat (limited to 'drivers/usb/serial')
44 files changed, 1083 insertions, 752 deletions
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index aec61880f36..131e61adaaf 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -31,14 +31,19 @@ static int debug; static struct usb_device_id id_table [] = { { USB_DEVICE(0x6547, 0x0232) }, + { USB_DEVICE(0x18ec, 0x3118) }, /* USB to IrDA adapter */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); -struct ark3116_private { - spinlock_t lock; - u8 termios_initialized; -}; +static int is_irda(struct usb_serial *serial) +{ + struct usb_device *dev = serial->dev; + if (le16_to_cpu(dev->descriptor.idVendor) == 0x18ec && + le16_to_cpu(dev->descriptor.idProduct) == 0x3118) + return 1; + return 0; +} static inline void ARK3116_SND(struct usb_serial *serial, int seq, __u8 request, __u8 requesttype, @@ -82,29 +87,28 @@ static inline void ARK3116_RCV_QUIET(struct usb_serial *serial, static int ark3116_attach(struct usb_serial *serial) { char *buf; - struct ark3116_private *priv; - int i; - - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL); - if (!priv) - goto cleanup; - spin_lock_init(&priv->lock); - - usb_set_serial_port_data(serial->port[i], priv); - } buf = kmalloc(1, GFP_KERNEL); if (!buf) { dbg("error kmalloc -> out of mem?"); - goto cleanup; + return -ENOMEM; } + if (is_irda(serial)) + dbg("IrDA mode"); + /* 3 */ ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002); ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001); ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008); - ARK3116_SND(serial, 6, 0xFE, 0x40, 0x0000, 0x000B); + ARK3116_SND(serial, 6, 0xFE, 0x40, is_irda(serial) ? 0x0001 : 0x0000, + 0x000B); + + if (is_irda(serial)) { + ARK3116_SND(serial, 1001, 0xFE, 0x40, 0x0000, 0x000C); + ARK3116_SND(serial, 1002, 0xFE, 0x40, 0x0041, 0x000D); + ARK3116_SND(serial, 1003, 0xFE, 0x40, 0x0001, 0x000A); + } /* <-- seq7 */ ARK3116_RCV(serial, 7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf); @@ -141,6 +145,8 @@ static int ark3116_attach(struct usb_serial *serial) ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003); ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000); ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001); + if (is_irda(serial)) + ARK3116_SND(serial, 1004, 0xFE, 0x40, 0x0000, 0x0009); ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003); ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf); ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003); @@ -149,13 +155,16 @@ static int ark3116_attach(struct usb_serial *serial) kfree(buf); return 0; +} -cleanup: - for (--i; i >= 0; --i) { - kfree(usb_get_serial_port_data(serial->port[i])); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; +static void ark3116_init_termios(struct tty_struct *tty) +{ + struct ktermios *termios = tty->termios; + *termios = tty_std_termios; + termios->c_cflag = B9600 | CS8 + | CREAD | HUPCL | CLOCAL; + termios->c_ispeed = 9600; + termios->c_ospeed = 9600; } static void ark3116_set_termios(struct tty_struct *tty, @@ -163,10 +172,8 @@ static void ark3116_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; - struct ark3116_private *priv = usb_get_serial_port_data(port); struct ktermios *termios = tty->termios; unsigned int cflag = termios->c_cflag; - unsigned long flags; int baud; int ark3116_baud; char *buf; @@ -176,16 +183,6 @@ static void ark3116_set_termios(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); - if (!priv->termios_initialized) { - *termios = tty_std_termios; - termios->c_cflag = B9600 | CS8 - | CREAD | HUPCL | CLOCAL; - termios->c_ispeed = 9600; - termios->c_ospeed = 9600; - priv->termios_initialized = 1; - } - spin_unlock_irqrestore(&priv->lock, flags); cflag = termios->c_cflag; termios->c_cflag &= ~(CMSPAR|CRTSCTS); @@ -318,8 +315,7 @@ static void ark3116_set_termios(struct tty_struct *tty, return; } -static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; @@ -334,7 +330,7 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port, return -ENOMEM; } - result = usb_serial_generic_open(tty, port, filp); + result = usb_serial_generic_open(tty, port); if (result) goto err_out; @@ -455,6 +451,7 @@ static struct usb_serial_driver ark3116_device = { .num_ports = 1, .attach = ark3116_attach, .set_termios = ark3116_set_termios, + .init_termios = ark3116_init_termios, .ioctl = ark3116_ioctl, .tiocmget = ark3116_tiocmget, .open = ark3116_open, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 7033b031b44..a0467bc6162 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -92,7 +92,7 @@ static int debug; static int belkin_sa_startup(struct usb_serial *serial); static void belkin_sa_release(struct usb_serial *serial); static int belkin_sa_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); + struct usb_serial_port *port); static void belkin_sa_close(struct usb_serial_port *port); static void belkin_sa_read_int_callback(struct urb *urb); static void belkin_sa_set_termios(struct tty_struct *tty, @@ -213,7 +213,7 @@ static void belkin_sa_release(struct usb_serial *serial) static int belkin_sa_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) + struct usb_serial_port *port) { int retval = 0; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2830766f5b3..59eff721fcc 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -56,6 +56,18 @@ #define CH341_BAUDBASE_FACTOR 1532620800 #define CH341_BAUDBASE_DIVMAX 3 +/* Break support - the information used to implement this was gleaned from + * the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato. + */ + +#define CH341_REQ_WRITE_REG 0x9A +#define CH341_REQ_READ_REG 0x95 +#define CH341_REG_BREAK1 0x05 +#define CH341_REG_BREAK2 0x18 +#define CH341_NBREAK_BITS_REG1 0x01 +#define CH341_NBREAK_BITS_REG2 0x40 + + static int debug; static struct usb_device_id id_table [] = { @@ -300,8 +312,7 @@ static void ch341_close(struct usb_serial_port *port) /* open this device, set default parameters */ -static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]); @@ -333,7 +344,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, return -EPROTO; } - r = usb_serial_generic_open(tty, port, filp); + r = usb_serial_generic_open(tty, port); out: return r; } @@ -374,6 +385,45 @@ static void ch341_set_termios(struct tty_struct *tty, */ } +static void ch341_break_ctl(struct tty_struct *tty, int break_state) +{ + const uint16_t ch341_break_reg = + CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8); + struct usb_serial_port *port = tty->driver_data; + int r; + uint16_t reg_contents; + uint8_t break_reg[2]; + + dbg("%s()", __func__); + + r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG, + ch341_break_reg, 0, break_reg, sizeof(break_reg)); + if (r < 0) { + printk(KERN_WARNING "%s: USB control read error whilst getting" + " break register contents.\n", __FILE__); + return; + } + dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x", + __func__, break_reg[0], break_reg[1]); + if (break_state != 0) { + dbg("%s - Enter break state requested", __func__); + break_reg[0] &= ~CH341_NBREAK_BITS_REG1; + break_reg[1] &= ~CH341_NBREAK_BITS_REG2; + } else { + dbg("%s - Leave break state requested", __func__); + break_reg[0] |= CH341_NBREAK_BITS_REG1; + break_reg[1] |= CH341_NBREAK_BITS_REG2; + } + dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x", + __func__, break_reg[0], break_reg[1]); + reg_contents = (uint16_t)break_reg[0] | ((uint16_t)break_reg[1] << 8); + r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, + ch341_break_reg, reg_contents); + if (r < 0) + printk(KERN_WARNING "%s: USB control write error whilst setting" + " break register contents.\n", __FILE__); +} + static int ch341_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { @@ -577,6 +627,7 @@ static struct usb_serial_driver ch341_device = { .close = ch341_close, .ioctl = ch341_ioctl, .set_termios = ch341_set_termios, + .break_ctl = ch341_break_ctl, .tiocmget = ch341_tiocmget, .tiocmset = ch341_tiocmset, .read_int_callback = ch341_read_int_callback, diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 0e4f2e41ace..b22ac325852 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/tty.h> #include <linux/console.h> +#include <linux/serial.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -63,7 +64,7 @@ static int usb_console_setup(struct console *co, char *options) char *s; struct usb_serial *serial; struct usb_serial_port *port; - int retval = 0; + int retval; struct tty_struct *tty = NULL; struct ktermios *termios = NULL, dummy; @@ -116,13 +117,17 @@ static int usb_console_setup(struct console *co, char *options) return -ENODEV; } - port = serial->port[0]; + retval = usb_autopm_get_interface(serial->interface); + if (retval) + goto error_get_interface; + + port = serial->port[co->index - serial->minor]; tty_port_tty_set(&port->port, NULL); info->port = port; ++port->port.count; - if (port->port.count == 1) { + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) { if (serial->type->set_termios) { /* * allocate a fake tty so the driver can initialize @@ -150,9 +155,9 @@ static int usb_console_setup(struct console *co, char *options) /* only call the device specific open if this * is the first time the port is opened */ if (serial->type->open) - retval = serial->type->open(NULL, port, NULL); + retval = serial->type->open(NULL, port); else - retval = usb_serial_generic_open(NULL, port, NULL); + retval = usb_serial_generic_open(NULL, port); if (retval) { err("could not open USB console port"); @@ -168,6 +173,7 @@ static int usb_console_setup(struct console *co, char *options) kfree(termios); kfree(tty); } + set_bit(ASYNCB_INITIALIZED, &port->port.flags); } /* Now that any required fake tty operations are completed restore * the tty port count */ @@ -175,18 +181,22 @@ static int usb_console_setup(struct console *co, char *options) /* The console is special in terms of closing the device so * indicate this port is now acting as a system console. */ port->console = 1; - retval = 0; -out: + mutex_unlock(&serial->disc_mutex); return retval; -free_termios: + + free_termios: kfree(termios); tty_port_tty_set(&port->port, NULL); -free_tty: + free_tty: kfree(tty); -reset_open_count: + reset_open_count: port->port.count = 0; - goto out; + usb_autopm_put_interface(serial->interface); + error_get_interface: + usb_serial_put(serial); + mutex_unlock(&serial->disc_mutex); + return retval; } static void usb_console_write(struct console *co, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 985cbcf48bd..4a208fe85bc 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -33,8 +33,7 @@ /* * Function Prototypes */ -static int cp210x_open(struct tty_struct *, struct usb_serial_port *, - struct file *); +static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *); static void cp210x_cleanup(struct usb_serial_port *); static void cp210x_close(struct usb_serial_port *); static void cp210x_get_termios(struct tty_struct *, @@ -368,8 +367,7 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) { return baud; } -static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; int result; @@ -399,12 +397,6 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port, /* Configure the termios structure */ cp210x_get_termios(tty, port); - - /* Set the DTR and RTS pins low */ - cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data - : port, - NULL, TIOCM_DTR | TIOCM_RTS, 0); - return 0; } diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 336523fd736..b0f6402a91c 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -61,7 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial); static void cyberjack_disconnect(struct usb_serial *serial); static void cyberjack_release(struct usb_serial *serial); static int cyberjack_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); + struct usb_serial_port *port); static void cyberjack_close(struct usb_serial_port *port); static int cyberjack_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -173,7 +173,7 @@ static void cyberjack_release(struct usb_serial *serial) } static int cyberjack_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) + struct usb_serial_port *port) { struct cyberjack_private *priv; unsigned long flags; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 59adfe12311..e0a8b715f2f 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -172,8 +172,7 @@ static int cypress_earthmate_startup(struct usb_serial *serial); static int cypress_hidcom_startup(struct usb_serial *serial); static int cypress_ca42v2_startup(struct usb_serial *serial); static void cypress_release(struct usb_serial *serial); -static int cypress_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port); static void cypress_close(struct usb_serial_port *port); static void cypress_dtr_rts(struct usb_serial_port *port, int on); static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -633,8 +632,7 @@ static void cypress_release(struct usb_serial *serial) } -static int cypress_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port) { struct cypress_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; @@ -659,15 +657,7 @@ static int cypress_open(struct tty_struct *tty, spin_unlock_irqrestore(&priv->lock, flags); /* Set termios */ - result = cypress_write(tty, port, NULL, 0); - - if (result) { - dev_err(&port->dev, - "%s - failed setting the control lines - error %d\n", - __func__, result); - return result; - } else - dbg("%s - success setting the control lines", __func__); + cypress_send(port); if (tty) cypress_set_termios(tty, port, &priv->tmp_termios); @@ -1005,6 +995,8 @@ static void cypress_set_termios(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); + /* We can't clean this one up as we don't know the device type + early enough */ if (!priv->termios_initialized) { if (priv->chiptype == CT_EARTHMATE) { *(tty->termios) = tty_std_termios; diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index e772b01ac3a..1fd360e0406 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -57,7 +57,7 @@ #define UART_RI 0x10 /* ring indicator - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */ -/* Note - the below has nothing to to with the "feature report" reset */ +/* Note - the below has nothing to do with the "feature report" reset */ #define CONTROL_RESET 0x08 /* sent with output report - host to device */ /* End of RS-232 protocol definitions */ diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index f4808091c47..ab3dd991586 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -453,8 +453,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, static void digi_write_bulk_callback(struct urb *urb); static int digi_write_room(struct tty_struct *tty); static int digi_chars_in_buffer(struct tty_struct *tty); -static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static int digi_open(struct tty_struct *tty, struct usb_serial_port *port); static void digi_close(struct usb_serial_port *port); static int digi_carrier_raised(struct usb_serial_port *port); static void digi_dtr_rts(struct usb_serial_port *port, int on); @@ -1347,8 +1346,7 @@ static int digi_carrier_raised(struct usb_serial_port *port) return 0; } -static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) { int ret; unsigned char buf[32]; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 80cb3471adb..33c9e9cf9eb 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -79,8 +79,7 @@ static int debug; #define EMPEG_PRODUCT_ID 0x0001 /* function prototypes for an empeg-car player */ -static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port); static void empeg_close(struct usb_serial_port *port); static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, @@ -90,8 +89,7 @@ static int empeg_chars_in_buffer(struct tty_struct *tty); static void empeg_throttle(struct tty_struct *tty); static void empeg_unthrottle(struct tty_struct *tty); static int empeg_startup(struct usb_serial *serial); -static void empeg_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios); +static void empeg_init_termios(struct tty_struct *tty); static void empeg_write_bulk_callback(struct urb *urb); static void empeg_read_bulk_callback(struct urb *urb); @@ -123,7 +121,7 @@ static struct usb_serial_driver empeg_device = { .throttle = empeg_throttle, .unthrottle = empeg_unthrottle, .attach = empeg_startup, - .set_termios = empeg_set_termios, + .init_termios = empeg_init_termios, .write = empeg_write, .write_room = empeg_write_room, .chars_in_buffer = empeg_chars_in_buffer, @@ -142,17 +140,13 @@ static int bytes_out; /****************************************************************************** * Empeg specific driver functions ******************************************************************************/ -static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port) { struct usb_serial *serial = port->serial; int result = 0; dbg("%s - port %d", __func__, port->number); - /* Force default termio settings */ - empeg_set_termios(tty, port, NULL) ; - bytes_in = 0; bytes_out = 0; @@ -425,11 +419,9 @@ static int empeg_startup(struct usb_serial *serial) } -static void empeg_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) +static void empeg_init_termios(struct tty_struct *tty) { struct ktermios *termios = tty->termios; - dbg("%s - port %d", __func__, port->number); /* * The empeg-car player wants these particular tty settings. diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8fec5d4455c..4f883b1773d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -176,6 +176,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, @@ -694,6 +697,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(DE_VID, WHT_PID) }, { USB_DEVICE(ADI_VID, ADI_GNICE_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, @@ -702,6 +707,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, + { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -747,8 +754,7 @@ static int ftdi_sio_probe(struct usb_serial *serial, const struct usb_device_id *id); static int ftdi_sio_port_probe(struct usb_serial_port *port); static int ftdi_sio_port_remove(struct usb_serial_port *port); -static int ftdi_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port); static void ftdi_close(struct usb_serial_port *port); static void ftdi_dtr_rts(struct usb_serial_port *port, int on); static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -1680,8 +1686,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) return 0; } -static int ftdi_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) { /* ftdi_open */ struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 8c92b88166a..6f31e0d7189 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -81,6 +81,9 @@ /* OpenDCC (www.opendcc.de) product id */ #define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB /* Sprog II (Andrew Crosland's SprogII DCC interface) */ #define FTDI_SPROG_II 0xF0C8 @@ -930,6 +933,7 @@ */ #define ADI_VID 0x0456 #define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 /* * JETI SPECTROMETER SPECBOS 1201 @@ -968,6 +972,12 @@ #define MARVELL_OPENRD_PID 0x9e90 /* + * Hameg HO820 and HO870 interface (using VID 0x0403) + */ +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO870_PID 0xed71 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 8839f1c70b7..20432d34552 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -933,8 +933,7 @@ static int garmin_init_session(struct usb_serial_port *port) -static int garmin_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port) { unsigned long flags; int status = 0; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index ce57f6a32bd..deba08c7a01 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -19,7 +19,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/uaccess.h> - +#include <linux/kfifo.h> static int debug; @@ -114,8 +114,7 @@ void usb_serial_generic_deregister(void) #endif } -int usb_serial_generic_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; int result = 0; @@ -167,24 +166,6 @@ static void generic_cleanup(struct usb_serial_port *port) } } -int usb_serial_generic_resume(struct usb_serial *serial) -{ - struct usb_serial_port *port; - int i, c = 0, r; - - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - if (port->port.count && port->read_urb) { - r = usb_submit_urb(port->read_urb, GFP_NOIO); - if (r < 0) - c++; - } - } - - return c ? -EIO : 0; -} -EXPORT_SYMBOL_GPL(usb_serial_generic_resume); - void usb_serial_generic_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); @@ -273,12 +254,81 @@ error_no_buffer: return bwrite; } +/** + * usb_serial_generic_write_start - kick off an URB write + * @port: Pointer to the &struct usb_serial_port data + * + * Returns the number of bytes queued on success. This will be zero if there + * was nothing to send. Otherwise, it returns a negative errno value + */ +static int usb_serial_generic_write_start(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + unsigned char *data; + int result; + int count; + unsigned long flags; + bool start_io; + + /* Atomically determine whether we can and need to start a USB + * operation. */ + spin_lock_irqsave(&port->lock, flags); + if (port->write_urb_busy) + start_io = false; + else { + start_io = (__kfifo_len(port->write_fifo) != 0); + port->write_urb_busy = start_io; + } + spin_unlock_irqrestore(&port->lock, flags); + + if (!start_io) + return 0; + + data = port->write_urb->transfer_buffer; + count = kfifo_get(port->write_fifo, data, port->bulk_out_size); + usb_serial_debug_data(debug, &port->dev, __func__, count, data); + + /* set up our urb */ + usb_fill_bulk_urb(port->write_urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, count, + ((serial->type->write_bulk_callback) ? + serial->type->write_bulk_callback : + usb_serial_generic_write_bulk_callback), + port); + + /* send the data out the bulk port */ + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); + /* don't have to grab the lock here, as we will + retry if != 0 */ + port->write_urb_busy = 0; + } else + result = count; + + return result; +} + +/** + * usb_serial_generic_write - generic write function for serial USB devices + * @tty: Pointer to &struct tty_struct for the device + * @port: Pointer to the &usb_serial_port structure for the device + * @buf: Pointer to the data to write + * @count: Number of bytes to write + * + * Returns the number of characters actually written, which may be anything + * from zero to @count. If an error occurs, it returns the negative errno + * value. + */ int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; int result; - unsigned char *data; dbg("%s - port %d", __func__, port->number); @@ -288,57 +338,20 @@ int usb_serial_generic_write(struct tty_struct *tty, } /* only do something if we have a bulk out endpoint */ - if (serial->num_bulk_out) { - unsigned long flags; - - if (serial->type->max_in_flight_urbs) - return usb_serial_multi_urb_write(tty, port, - buf, count); - - spin_lock_irqsave(&port->lock, flags); - if (port->write_urb_busy) { - spin_unlock_irqrestore(&port->lock, flags); - dbg("%s - already writing", __func__); - return 0; - } - port->write_urb_busy = 1; - spin_unlock_irqrestore(&port->lock, flags); - - count = (count > port->bulk_out_size) ? - port->bulk_out_size : count; - - memcpy(port->write_urb->transfer_buffer, buf, count); - data = port->write_urb->transfer_buffer; - usb_serial_debug_data(debug, &port->dev, __func__, count, data); + if (!serial->num_bulk_out) + return 0; - /* set up our urb */ - usb_fill_bulk_urb(port->write_urb, serial->dev, - usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), - port->write_urb->transfer_buffer, count, - ((serial->type->write_bulk_callback) ? - serial->type->write_bulk_callback : - usb_serial_generic_write_bulk_callback), - port); + if (serial->type->max_in_flight_urbs) + return usb_serial_multi_urb_write(tty, port, + buf, count); - /* send the data out the bulk port */ - port->write_urb_busy = 1; - result = usb_submit_urb(port->write_urb, GFP_ATOMIC); - if (result) { - dev_err(&port->dev, - "%s - failed submitting write urb, error %d\n", - __func__, result); - /* don't have to grab the lock here, as we will - retry if != 0 */ - port->write_urb_busy = 0; - } else - result = count; + count = kfifo_put(port->write_fifo, buf, count); + result = usb_serial_generic_write_start(port); - return result; - } + if (result >= 0) + result = count; - /* no bulk out, so return 0 bytes written */ - return 0; + return result; } EXPORT_SYMBOL_GPL(usb_serial_generic_write); @@ -356,9 +369,8 @@ int usb_serial_generic_write_room(struct tty_struct *tty) room = port->bulk_out_size * (serial->type->max_in_flight_urbs - port->urbs_in_flight); - } else if (serial->num_bulk_out && !(port->write_urb_busy)) { - room = port->bulk_out_size; - } + } else if (serial->num_bulk_out) + room = port->write_fifo->size - __kfifo_len(port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); dbg("%s - returns %d", __func__, room); @@ -378,11 +390,8 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) spin_lock_irqsave(&port->lock, flags); chars = port->tx_bytes_flight; spin_unlock_irqrestore(&port->lock, flags); - } else if (serial->num_bulk_out) { - /* FIXME: Locking */ - if (port->write_urb_busy) - chars = port->write_urb->transfer_buffer_length; - } + } else if (serial->num_bulk_out) + chars = kfifo_len(port->write_fifo); dbg("%s - returns %d", __func__, chars); return chars; @@ -486,16 +495,23 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) if (port->urbs_in_flight < 0) port->urbs_in_flight = 0; spin_unlock_irqrestore(&port->lock, flags); + + if (status) { + dbg("%s - nonzero multi-urb write bulk status " + "received: %d", __func__, status); + return; + } } else { - /* Handle the case for single urb mode */ port->write_urb_busy = 0; - } - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); - return; + if (status) { + dbg("%s - nonzero multi-urb write bulk status " + "received: %d", __func__, status); + kfifo_reset(port->write_fifo); + } else + usb_serial_generic_write_start(port); } + usb_serial_port_softint(port); } EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback); @@ -560,6 +576,33 @@ int usb_serial_handle_break(struct usb_serial_port *port) } EXPORT_SYMBOL_GPL(usb_serial_handle_break); +int usb_serial_generic_resume(struct usb_serial *serial) +{ + struct usb_serial_port *port; + int i, c = 0, r; + + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + if (!port->port.count) + continue; + + if (port->read_urb) { + r = usb_submit_urb(port->read_urb, GFP_NOIO); + if (r < 0) + c++; + } + + if (port->write_urb) { + r = usb_serial_generic_write_start(port); + if (r < 0) + c++; + } + } + + return c ? -EIO : 0; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_resume); + void usb_serial_generic_disconnect(struct usb_serial *serial) { int i; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 0191693625d..b97960ac92f 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -205,8 +205,7 @@ static void edge_bulk_out_data_callback(struct urb *urb); static void edge_bulk_out_cmd_callback(struct urb *urb); /* function prototypes for the usbserial callbacks */ -static int edge_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static int edge_open(struct tty_struct *tty, struct usb_serial_port *port); static void edge_close(struct usb_serial_port *port); static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -852,8 +851,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb) * If successful, we return 0 * Otherwise we return a negative error number. *****************************************************************************/ -static int edge_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct usb_serial *serial; @@ -2542,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) /***************************************************************************** * send_cmd_write_uart_register - * this function builds up a uart register message and sends to to the device. + * this function builds up a uart register message and sends to the device. *****************************************************************************/ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index e8bc42f92e7..d4cc0f7af40 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1831,8 +1831,7 @@ static void edge_bulk_out_callback(struct urb *urb) tty_kref_put(tty); } -static int edge_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct edgeport_serial *edge_serial; diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 2545d45ce16..24fcc64b837 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -75,7 +75,7 @@ static int initial_wait; /* Function prototypes for an ipaq */ static int ipaq_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); + struct usb_serial_port *port); static void ipaq_close(struct usb_serial_port *port); static int ipaq_calc_num_ports(struct usb_serial *serial); static int ipaq_startup(struct usb_serial *serial); @@ -587,7 +587,7 @@ static int bytes_in; static int bytes_out; static int ipaq_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) + struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct ipaq_private *priv; @@ -628,11 +628,6 @@ static int ipaq_open(struct tty_struct *tty, priv->free_len += PACKET_SIZE; } - if (tty) { - /* FIXME: These two are bogus */ - tty->raw = 1; - tty->real_raw = 1; - } /* * Lose the small buffers usbserial provides. Make larger ones. */ diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 29ad038b9c8..727d323f092 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -193,8 +193,7 @@ static void ipw_read_bulk_callback(struct urb *urb) return; } -static int ipw_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_device *dev = port->serial->dev; u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT; diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 66009b6b763..95d8d26b9a4 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -86,8 +86,7 @@ static int buffer_size; static int xbof = -1; static int ir_startup (struct usb_serial *serial); -static int ir_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filep); +static int ir_open(struct tty_struct *tty, struct usb_serial_port *port); static void ir_close(struct usb_serial_port *port); static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -296,8 +295,7 @@ static int ir_startup(struct usb_serial *serial) return 0; } -static int ir_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int ir_open(struct tty_struct *tty, struct usb_serial_port *port) { char *buffer; int result = 0; diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 96873a7a32b..e6e02b178d2 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -40,7 +40,7 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v0.10" +#define DRIVER_VERSION "v0.11" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" static struct usb_device_id id_table[] = { @@ -64,6 +64,7 @@ static int cdmode = 1; static int iuu_cardin; static int iuu_cardout; static int xmas; +static int vcc_default = 5; static void read_rxcmd_callback(struct urb *urb); @@ -71,7 +72,6 @@ struct iuu_private { spinlock_t lock; /* store irq state */ wait_queue_head_t delta_msr_wait; u8 line_status; - u8 termios_initialized; int tiostatus; /* store IUART SIGNAL for tiocmget call */ u8 reset; /* if 1 reset is needed */ int poll; /* number of poll */ @@ -80,6 +80,7 @@ struct iuu_private { u8 *buf; /* used for initialize speed */ u8 *dbgbuf; /* debug buffer */ u8 len; + int vcc; /* vcc (either 3 or 5 V) */ }; @@ -115,6 +116,7 @@ static int iuu_startup(struct usb_serial *serial) kfree(priv); return -ENOMEM; } + priv->vcc = vcc_default; spin_lock_init(&priv->lock); init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(serial->port[0], priv); @@ -1010,22 +1012,28 @@ static void iuu_close(struct usb_serial_port *port) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - msleep(1000); - /* wait one second to free all buffers */ iuu_led(port, 0, 0, 0xF000, 0xFF); - msleep(1000); - usb_reset_device(port->serial->dev); } } -static int iuu_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void iuu_init_termios(struct tty_struct *tty) +{ + *(tty->termios) = tty_std_termios; + tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 + | TIOCM_CTS | CSTOPB | PARENB; + tty->termios->c_ispeed = 9600; + tty->termios->c_ospeed = 9600; + tty->termios->c_lflag = 0; + tty->termios->c_oflag = 0; + tty->termios->c_iflag = 0; +} + +static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; u8 *buf; int result; u32 actual; - unsigned long flags; struct iuu_private *priv = usb_get_serial_port_data(port); dbg("%s - port %d", __func__, port->number); @@ -1064,21 +1072,7 @@ static int iuu_open(struct tty_struct *tty, port->bulk_in_buffer, 512, NULL, NULL); - /* set the termios structure */ - spin_lock_irqsave(&priv->lock, flags); - if (tty && !priv->termios_initialized) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 - | TIOCM_CTS | CSTOPB | PARENB; - tty->termios->c_ispeed = 9600; - tty->termios->c_ospeed = 9600; - tty->termios->c_lflag = 0; - tty->termios->c_oflag = 0; - tty->termios->c_iflag = 0; - priv->termios_initialized = 1; - priv->poll = 0; - } - spin_unlock_irqrestore(&priv->lock, flags); + priv->poll = 0; /* initialize writebuf */ #define FISH(a, b, c, d) do { \ @@ -1187,6 +1181,95 @@ static int iuu_open(struct tty_struct *tty, return result; } +/* how to change VCC */ +static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc) +{ + int status; + u8 *buf; + + buf = kmalloc(5, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + dbg("%s - enter", __func__); + + buf[0] = IUU_SET_VCC; + buf[1] = vcc & 0xFF; + buf[2] = (vcc >> 8) & 0xFF; + buf[3] = (vcc >> 16) & 0xFF; + buf[4] = (vcc >> 24) & 0xFF; + + status = bulk_immediate(port, buf, 5); + kfree(buf); + + if (status != IUU_OPERATION_OK) + dbg("%s - vcc error status = %2x", __func__, status); + else + dbg("%s - vcc OK !", __func__); + + return status; +} + +/* + * Sysfs Attributes + */ + +static ssize_t show_vcc_mode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct iuu_private *priv = usb_get_serial_port_data(port); + + return sprintf(buf, "%d\n", priv->vcc); +} + +static ssize_t store_vcc_mode(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long v; + + if (strict_strtoul(buf, 10, &v)) { + dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n", + __func__, buf); + goto fail_store_vcc_mode; + } + + dbg("%s: setting vcc_mode = %ld", __func__, v); + + if ((v != 3) && (v != 5)) { + dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v); + } else { + iuu_vcc_set(port, v); + priv->vcc = v; + } +fail_store_vcc_mode: + return count; +} + +static DEVICE_ATTR(vcc_mode, S_IRUSR | S_IWUSR, show_vcc_mode, + store_vcc_mode); + +static int iuu_create_sysfs_attrs(struct usb_serial_port *port) +{ + dbg("%s", __func__); + + return device_create_file(&port->dev, &dev_attr_vcc_mode); +} + +static int iuu_remove_sysfs_attrs(struct usb_serial_port *port) +{ + dbg("%s", __func__); + + device_remove_file(&port->dev, &dev_attr_vcc_mode); + return 0; +} + +/* + * End Sysfs Attributes + */ + static struct usb_serial_driver iuu_device = { .driver = { .owner = THIS_MODULE, @@ -1194,6 +1277,8 @@ static struct usb_serial_driver iuu_device = { }, .id_table = id_table, .num_ports = 1, + .port_probe = iuu_create_sysfs_attrs, + .port_remove = iuu_remove_sysfs_attrs, .open = iuu_open, .close = iuu_close, .write = iuu_uart_write, @@ -1201,6 +1286,7 @@ static struct usb_serial_driver iuu_device = { .tiocmget = iuu_tiocmget, .tiocmset = iuu_tiocmset, .set_termios = iuu_set_termios, + .init_termios = iuu_init_termios, .attach = iuu_startup, .release = iuu_release, }; @@ -1242,14 +1328,19 @@ module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(xmas, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(xmas, "xmas color enabled or not"); +MODULE_PARM_DESC(xmas, "Xmas colors enabled or not"); module_param(boost, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(boost, "overclock boost percent 100 to 500"); +MODULE_PARM_DESC(boost, "Card overclock boost (in percent 100-500)"); module_param(clockmode, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(clockmode, "1=3Mhz579,2=3Mhz680,3=6Mhz"); +MODULE_PARM_DESC(clockmode, "Card clock mode (1=3.579 MHz, 2=3.680 MHz, " + "3=6 Mhz)"); module_param(cdmode, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(cdmode, "Card detect mode 0=none, 1=CD, 2=!CD, 3=DSR, " - "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING"); +MODULE_PARM_DESC(cdmode, "Card detect mode (0=none, 1=CD, 2=!CD, 3=DSR, " + "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING)"); + +module_param(vcc_default, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(vcc_default, "Set default VCC (either 3 for 3.3V or 5 " + "for 5V). Default to 5."); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 2594b8743d3..f8c4b07033f 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1209,8 +1209,7 @@ static int keyspan_write_room(struct tty_struct *tty) } -static int keyspan_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) { struct keyspan_port_private *p_priv; struct keyspan_serial_private *s_priv; diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 3107ed15af6..30771e5b397 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -36,8 +36,7 @@ /* Function prototypes for Keyspan serial converter */ static int keyspan_open (struct tty_struct *tty, - struct usb_serial_port *port, - struct file *filp); + struct usb_serial_port *port); static void keyspan_close (struct usb_serial_port *port); static void keyspan_dtr_rts (struct usb_serial_port *port, int on); static int keyspan_startup (struct usb_serial *serial); diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index d0b12e40c2b..257c16cc6b2 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -681,7 +681,7 @@ static int keyspan_pda_carrier_raised(struct usb_serial_port *port) static int keyspan_pda_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) + struct usb_serial_port *port) { struct usb_serial *serial = port->serial; unsigned char room; diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 0f44bb8e8d4..f7373371b13 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -38,7 +38,7 @@ * 0.3a - implemented pools of write URBs * 0.3 - alpha version for public testing * 0.2 - TIOCMGET works, so autopilot(1) can be used! - * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l + * 0.1 - can be used to do pilot-xfer -p /dev/ttyUSB0 -l * * The driver skeleton is mainly based on mct_u232.c and various other * pieces of code shamelessly copied from the drivers/usb/serial/ directory. @@ -75,8 +75,7 @@ static int debug; static int klsi_105_startup(struct usb_serial *serial); static void klsi_105_disconnect(struct usb_serial *serial); static void klsi_105_release(struct usb_serial *serial); -static int klsi_105_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); static void klsi_105_close(struct usb_serial_port *port); static int klsi_105_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -358,8 +357,7 @@ static void klsi_105_release(struct usb_serial *serial) } } /* klsi_105_release */ -static int klsi_105_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) { struct klsi_105_private *priv = usb_get_serial_port_data(port); int retval = 0; @@ -371,10 +369,6 @@ static int klsi_105_open(struct tty_struct *tty, dbg("%s port %d", __func__, port->number); - /* force low_latency on so that our tty_push actually forces - * the data through - * tty->low_latency = 1; */ - /* Do a defined restart: * Set up sane default baud rate and send the 'READ_ON' * vendor command. diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 6db0e561f68..45ea694b3ae 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -70,8 +70,7 @@ static int debug; /* Function prototypes */ static int kobil_startup(struct usb_serial *serial); static void kobil_release(struct usb_serial *serial); -static int kobil_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port); static void kobil_close(struct usb_serial_port *port); static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -85,7 +84,7 @@ static void kobil_read_int_callback(struct urb *urb); static void kobil_write_callback(struct urb *purb); static void kobil_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); - +static void kobil_init_termios(struct tty_struct *tty); static struct usb_device_id id_table [] = { { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) }, @@ -120,6 +119,7 @@ static struct usb_serial_driver kobil_device = { .release = kobil_release, .ioctl = kobil_ioctl, .set_termios = kobil_set_termios, + .init_termios = kobil_init_termios, .tiocmget = kobil_tiocmget, .tiocmset = kobil_tiocmset, .open = kobil_open, @@ -210,9 +210,17 @@ static void kobil_release(struct usb_serial *serial) kfree(usb_get_serial_port_data(serial->port[i])); } +static void kobil_init_termios(struct tty_struct *tty) +{ + /* Default to echo off and other sane device settings */ + tty->termios->c_lflag = 0; + tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE); + tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF; + /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */ + tty->termios->c_oflag &= ~ONLCR; +} -static int kobil_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) { int result = 0; struct kobil_private *priv; @@ -226,16 +234,6 @@ static int kobil_open(struct tty_struct *tty, /* someone sets the dev to 0 if the close method has been called */ port->interrupt_in_urb->dev = port->serial->dev; - if (tty) { - - /* Default to echo off and other sane device settings */ - tty->termios->c_lflag = 0; - tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | - XCASE); - tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF; - /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */ - tty->termios->c_oflag &= ~ONLCR; - } /* allocate memory for transfer buffer */ transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL); if (!transfer_buffer) diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index d8825e159aa..ad4998bbf16 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -93,8 +93,7 @@ static int debug; */ static int mct_u232_startup(struct usb_serial *serial); static void mct_u232_release(struct usb_serial *serial); -static int mct_u232_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port); static void mct_u232_close(struct usb_serial_port *port); static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); static void mct_u232_read_int_callback(struct urb *urb); @@ -421,8 +420,7 @@ static void mct_u232_release(struct usb_serial *serial) } } /* mct_u232_release */ -static int mct_u232_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); @@ -568,10 +566,13 @@ static void mct_u232_read_int_callback(struct urb *urb) * Work-a-round: handle the 'usual' bulk-in pipe here */ if (urb->transfer_buffer_length > 2) { - tty = tty_port_tty_get(&port->port); if (urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + tty = tty_port_tty_get(&port->port); + if (tty) { + tty_insert_flip_string(tty, data, + urb->actual_length); + tty_flip_buffer_push(tty); + } tty_kref_put(tty); } goto exit; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index ccd4dd340d2..763e32a44be 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -85,7 +85,7 @@ static int debug; #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 -static struct usb_device_id moschip_port_id_table [] = { +static struct usb_device_id moschip_port_id_table[] = { { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, { } /* terminating entry */ }; @@ -319,8 +319,7 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, return status; } -static int mos7720_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial; struct usb_serial_port *port0; @@ -378,10 +377,14 @@ static int mos7720_open(struct tty_struct *tty, /* Initialize MCS7720 -- Write Init values to corresponding Registers * * Register Index + * 0 : THR/RHR * 1 : IER * 2 : FCR * 3 : LCR * 4 : MCR + * 5 : LSR + * 6 : MSR + * 7 : SPR * * 0x08 : SP1/2 Control Reg */ @@ -1250,20 +1253,88 @@ static void mos7720_set_termios(struct tty_struct *tty, static int get_lsr_info(struct tty_struct *tty, struct moschip_port *mos7720_port, unsigned int __user *value) { - int count; + struct usb_serial_port *port = tty->driver_data; unsigned int result = 0; + unsigned char data = 0; + int port_number = port->number - port->serial->minor; + int count; count = mos7720_chars_in_buffer(tty); if (count == 0) { - dbg("%s -- Empty", __func__); - result = TIOCSER_TEMT; + send_mos_cmd(port->serial, MOS_READ, port_number, + UART_LSR, &data); + if ((data & (UART_LSR_TEMT | UART_LSR_THRE)) + == (UART_LSR_TEMT | UART_LSR_THRE)) { + dbg("%s -- Empty", __func__); + result = TIOCSER_TEMT; + } } - if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; return 0; } +static int mos7720_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7720_port = usb_get_serial_port_data(port); + unsigned int result = 0; + unsigned int mcr ; + unsigned int msr ; + + dbg("%s - port %d", __func__, port->number); + + mcr = mos7720_port->shadowMCR; + msr = mos7720_port->shadowMSR; + + result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ + | ((mcr & UART_MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ + | ((msr & UART_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ + | ((msr & UART_MSR_DCD) ? TIOCM_CAR : 0) /* 0x040 */ + | ((msr & UART_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ + | ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ + + dbg("%s -- %x", __func__, result); + + return result; +} + +static int mos7720_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7720_port = usb_get_serial_port_data(port); + unsigned int mcr ; + unsigned char lmcr; + + dbg("%s - port %d", __func__, port->number); + dbg("he was at tiocmget"); + + mcr = mos7720_port->shadowMCR; + + if (set & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (set & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (set & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + if (clear & TIOCM_RTS) + mcr &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + mcr &= ~UART_MCR_DTR; + if (clear & TIOCM_LOOP) + mcr &= ~UART_MCR_LOOP; + + mos7720_port->shadowMCR = mcr; + lmcr = mos7720_port->shadowMCR; + + send_mos_cmd(port->serial, MOS_WRITE, + port->number - port->serial->minor, UART_MCR, &lmcr); + + return 0; +} + static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, unsigned int __user *value) { @@ -1301,14 +1372,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, mcr &= ~UART_MCR_LOOP; break; - case TIOCMSET: - /* turn off the RTS and DTR and LOOPBACK - * and then only turn on what was asked to */ - mcr &= ~(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_LOOP); - mcr |= ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0); - mcr |= ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0); - mcr |= ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0); - break; } mos7720_port->shadowMCR = mcr; @@ -1320,28 +1383,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, return 0; } -static int get_modem_info(struct moschip_port *mos7720_port, - unsigned int __user *value) -{ - unsigned int result = 0; - unsigned int msr = mos7720_port->shadowMSR; - unsigned int mcr = mos7720_port->shadowMCR; - - result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ - | ((mcr & UART_MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ - | ((msr & UART_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ - | ((msr & UART_MSR_DCD) ? TIOCM_CAR: 0) /* 0x040 */ - | ((msr & UART_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ - | ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ - - - dbg("%s -- %x", __func__, result); - - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - static int get_serial_info(struct moschip_port *mos7720_port, struct serial_struct __user *retinfo) { @@ -1392,17 +1433,11 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file, /* FIXME: These should be using the mode methods */ case TIOCMBIS: case TIOCMBIC: - case TIOCMSET: dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__, port->number); return set_modem_info(mos7720_port, cmd, (unsigned int __user *)arg); - case TIOCMGET: - dbg("%s (%d) TIOCMGET", __func__, port->number); - return get_modem_info(mos7720_port, - (unsigned int __user *)arg); - case TIOCGSERIAL: dbg("%s (%d) TIOCGSERIAL", __func__, port->number); return get_serial_info(mos7720_port, @@ -1557,6 +1592,8 @@ static struct usb_serial_driver moschip7720_2port_driver = { .attach = mos7720_startup, .release = mos7720_release, .ioctl = mos7720_ioctl, + .tiocmget = mos7720_tiocmget, + .tiocmset = mos7720_tiocmset, .set_termios = mos7720_set_termios, .write = mos7720_write, .write_room = mos7720_write_room, diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 270009afdf7..f11abf52be7 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -824,8 +824,7 @@ static int mos7840_serial_probe(struct usb_serial *serial, * Otherwise we return a negative error number. *****************************************************************************/ -static int mos7840_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) { int response; int j; @@ -2134,106 +2133,6 @@ static int mos7840_get_lsr_info(struct tty_struct *tty, } /***************************************************************************** - * mos7840_set_modem_info - * function to set modem info - *****************************************************************************/ - -/* FIXME: Should be using the model control hooks */ - -static int mos7840_set_modem_info(struct moschip_port *mos7840_port, - unsigned int cmd, unsigned int __user *value) -{ - unsigned int mcr; - unsigned int arg; - __u16 Data; - int status; - struct usb_serial_port *port; - - if (mos7840_port == NULL) - return -1; - - port = (struct usb_serial_port *)mos7840_port->port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); - return -1; - } - - mcr = mos7840_port->shadowMCR; - - if (copy_from_user(&arg, value, sizeof(int))) - return -EFAULT; - - switch (cmd) { - case TIOCMBIS: - if (arg & TIOCM_RTS) - mcr |= MCR_RTS; - if (arg & TIOCM_DTR) - mcr |= MCR_RTS; - if (arg & TIOCM_LOOP) - mcr |= MCR_LOOPBACK; - break; - - case TIOCMBIC: - if (arg & TIOCM_RTS) - mcr &= ~MCR_RTS; - if (arg & TIOCM_DTR) - mcr &= ~MCR_RTS; - if (arg & TIOCM_LOOP) - mcr &= ~MCR_LOOPBACK; - break; - - case TIOCMSET: - /* turn off the RTS and DTR and LOOPBACK - * and then only turn on what was asked to */ - mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK); - mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0); - mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0); - mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0); - break; - } - - lock_kernel(); - mos7840_port->shadowMCR = mcr; - - Data = mos7840_port->shadowMCR; - status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - unlock_kernel(); - if (status < 0) { - dbg("setting MODEM_CONTROL_REGISTER Failed"); - return -1; - } - - return 0; -} - -/***************************************************************************** - * mos7840_get_modem_info - * function to get modem info - *****************************************************************************/ - -static int mos7840_get_modem_info(struct moschip_port *mos7840_port, - unsigned int __user *value) -{ - unsigned int result = 0; - __u16 msr; - unsigned int mcr = mos7840_port->shadowMCR; - mos7840_get_uart_reg(mos7840_port->port, - MODEM_STATUS_REGISTER, &msr); - result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ - |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ - |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ - |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */ - |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ - |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ - - dbg("%s -- %x", __func__, result); - - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - -/***************************************************************************** * mos7840_get_serial_info * function to get information about serial port *****************************************************************************/ @@ -2281,7 +2180,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file, struct async_icount cnow; struct async_icount cprev; struct serial_icounter_struct icount; - int mosret = 0; if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port"); @@ -2303,20 +2201,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file, return mos7840_get_lsr_info(tty, argp); return 0; - /* FIXME: use the modem hooks and remove this */ - case TIOCMBIS: - case TIOCMBIC: - case TIOCMSET: - dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__, - port->number); - mosret = - mos7840_set_modem_info(mos7840_port, cmd, argp); - return mosret; - - case TIOCMGET: - dbg("%s (%d) TIOCMGET", __func__, port->number); - return mos7840_get_modem_info(mos7840_port, argp); - case TIOCGSERIAL: dbg("%s (%d) TIOCGSERIAL", __func__, port->number); return mos7840_get_serial_info(mos7840_port, argp); diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index b66b71ccd12..99bd00f5188 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -8,7 +8,7 @@ * published by the Free Software Foundation. * * {sigh} - * Mororola should be using the CDC ACM USB spec, but instead + * Motorola should be using the CDC ACM USB spec, but instead * they try to just "do their own thing"... This driver should handle a * few phones in which a basic "dumb serial connection" is needed to be * able to get a connection through to them. diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index f5f3751a888..5ceaa4c6be0 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -80,8 +80,7 @@ exit: __func__, result); } -static int navman_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int navman_open(struct tty_struct *tty, struct usb_serial_port *port) { int result = 0; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 56857ddbd70..062265038bf 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -64,8 +64,7 @@ static int debug; #define BT_IGNITIONPRO_ID 0x2000 /* function prototypes */ -static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port); static void omninet_close(struct usb_serial_port *port); static void omninet_read_bulk_callback(struct urb *urb); static void omninet_write_bulk_callback(struct urb *urb); @@ -163,8 +162,7 @@ static int omninet_attach(struct usb_serial *serial) return 0; } -static int omninet_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct usb_serial_port *wport; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 336bba79ad3..1085a577c5c 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -144,8 +144,7 @@ exit: spin_unlock(&priv->lock); } -static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) { struct opticon_private *priv = usb_get_serial_data(port->serial); unsigned long flags; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c784ddbe7b6..f66e3988321 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -45,8 +45,7 @@ /* Function prototypes */ static int option_probe(struct usb_serial *serial, const struct usb_device_id *id); -static int option_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static int option_open(struct tty_struct *tty, struct usb_serial_port *port); static void option_close(struct usb_serial_port *port); static void option_dtr_rts(struct usb_serial_port *port, int on); @@ -292,6 +291,7 @@ static int option_resume(struct usb_serial *serial); #define TELIT_VENDOR_ID 0x1bc7 #define TELIT_PRODUCT_UC864E 0x1003 +#define TELIT_PRODUCT_UC864G 0x1004 /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 @@ -300,6 +300,7 @@ static int option_resume(struct usb_serial *serial); #define ZTE_PRODUCT_MF626 0x0031 #define ZTE_PRODUCT_CDMA_TECH 0xfffe #define ZTE_PRODUCT_AC8710 0xfff1 +#define ZTE_PRODUCT_AC2726 0xfff5 #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -503,6 +504,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) }, @@ -572,6 +574,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, @@ -593,6 +596,7 @@ static struct usb_driver option_driver = { #ifdef CONFIG_PM .suspend = usb_serial_suspend, .resume = usb_serial_resume, + .supports_autosuspend = 1, #endif .id_table = option_ids, .no_dynamic_id = 1, @@ -640,6 +644,12 @@ static int debug; #define IN_BUFLEN 4096 #define OUT_BUFLEN 4096 +struct option_intf_private { + spinlock_t susp_lock; + unsigned int suspended:1; + int in_flight; +}; + struct option_port_private { /* Input endpoints and buffer for this port */ struct urb *in_urbs[N_IN_URB]; @@ -648,6 +658,8 @@ struct option_port_private { struct urb *out_urbs[N_OUT_URB]; u8 *out_buffer[N_OUT_URB]; unsigned long out_busy; /* Bit vector of URBs in use */ + int opened; + struct usb_anchor delayed; /* Settings for the port */ int rts_state; /* Handshaking pins (outputs) */ @@ -694,12 +706,17 @@ module_exit(option_exit); static int option_probe(struct usb_serial *serial, const struct usb_device_id *id) { + struct option_intf_private *data; /* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */ if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID && serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 && serial->interface->cur_altsetting->desc.bInterfaceClass == 0x8) return -ENODEV; + data = serial->private = kzalloc(sizeof(struct option_intf_private), GFP_KERNEL); + if (!data) + return -ENOMEM; + spin_lock_init(&data->susp_lock); return 0; } @@ -756,12 +773,15 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct option_port_private *portdata; + struct option_intf_private *intfdata; int i; int left, todo; struct urb *this_urb = NULL; /* spurious */ int err; + unsigned long flags; portdata = usb_get_serial_port_data(port); + intfdata = port->serial->private; dbg("%s: write (%d chars)", __func__, count); @@ -783,17 +803,33 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port, dbg("%s: endpoint %d buf %d", __func__, usb_pipeendpoint(this_urb->pipe), i); + err = usb_autopm_get_interface_async(port->serial->interface); + if (err < 0) + break; + /* send the data */ memcpy(this_urb->transfer_buffer, buf, todo); this_urb->transfer_buffer_length = todo; - err = usb_submit_urb(this_urb, GFP_ATOMIC); - if (err) { - dbg("usb_submit_urb %p (write bulk) failed " - "(%d)", this_urb, err); - clear_bit(i, &portdata->out_busy); - continue; + spin_lock_irqsave(&intfdata->susp_lock, flags); + if (intfdata->suspended) { + usb_anchor_urb(this_urb, &portdata->delayed); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + } else { + intfdata->in_flight++; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err) { + dbg("usb_submit_urb %p (write bulk) failed " + "(%d)", this_urb, err); + clear_bit(i, &portdata->out_busy); + spin_lock_irqsave(&intfdata->susp_lock, flags); + intfdata->in_flight--; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + continue; + } } + portdata->tx_start_time[i] = jiffies; buf += todo; left -= todo; @@ -837,7 +873,10 @@ static void option_indat_callback(struct urb *urb) if (err) printk(KERN_ERR "%s: resubmit read urb failed. " "(%d)", __func__, err); + else + usb_mark_last_busy(port->serial->dev); } + } return; } @@ -846,15 +885,21 @@ static void option_outdat_callback(struct urb *urb) { struct usb_serial_port *port; struct option_port_private *portdata; + struct option_intf_private *intfdata; int i; dbg("%s", __func__); port = urb->context; + intfdata = port->serial->private; usb_serial_port_softint(port); - + usb_autopm_put_interface_async(port->serial->interface); portdata = usb_get_serial_port_data(port); + spin_lock(&intfdata->susp_lock); + intfdata->in_flight--; + spin_unlock(&intfdata->susp_lock); + for (i = 0; i < N_OUT_URB; ++i) { if (portdata->out_urbs[i] == urb) { smp_mb__before_clear_bit(); @@ -961,14 +1006,16 @@ static int option_chars_in_buffer(struct tty_struct *tty) return data_len; } -static int option_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int option_open(struct tty_struct *tty, struct usb_serial_port *port) { struct option_port_private *portdata; + struct option_intf_private *intfdata; + struct usb_serial *serial = port->serial; int i, err; struct urb *urb; portdata = usb_get_serial_port_data(port); + intfdata = serial->private; dbg("%s", __func__); @@ -987,6 +1034,12 @@ static int option_open(struct tty_struct *tty, option_send_setup(port); + serial->interface->needs_remote_wakeup = 1; + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 1; + spin_unlock_irq(&intfdata->susp_lock); + usb_autopm_put_interface(serial->interface); + return 0; } @@ -1011,16 +1064,23 @@ static void option_close(struct usb_serial_port *port) int i; struct usb_serial *serial = port->serial; struct option_port_private *portdata; + struct option_intf_private *intfdata = port->serial->private; dbg("%s", __func__); portdata = usb_get_serial_port_data(port); if (serial->dev) { /* Stop reading/writing urbs */ + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); + for (i = 0; i < N_IN_URB; i++) usb_kill_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) usb_kill_urb(portdata->out_urbs[i]); + usb_autopm_get_interface(serial->interface); + serial->interface->needs_remote_wakeup = 0; } } @@ -1125,6 +1185,7 @@ static int option_startup(struct usb_serial *serial) __func__, i); return 1; } + init_usb_anchor(&portdata->delayed); for (j = 0; j < N_IN_URB; j++) { buffer = (u8 *)__get_free_page(GFP_KERNEL); @@ -1227,18 +1288,52 @@ static void option_release(struct usb_serial *serial) #ifdef CONFIG_PM static int option_suspend(struct usb_serial *serial, pm_message_t message) { + struct option_intf_private *intfdata = serial->private; + int b; + dbg("%s entered", __func__); + + if (serial->dev->auto_pm) { + spin_lock_irq(&intfdata->susp_lock); + b = intfdata->in_flight; + spin_unlock_irq(&intfdata->susp_lock); + + if (b) + return -EBUSY; + } + + spin_lock_irq(&intfdata->susp_lock); + intfdata->suspended = 1; + spin_unlock_irq(&intfdata->susp_lock); stop_read_write_urbs(serial); return 0; } +static void play_delayed(struct usb_serial_port *port) +{ + struct option_intf_private *data; + struct option_port_private *portdata; + struct urb *urb; + int err; + + portdata = usb_get_serial_port_data(port); + data = port->serial->private; + while ((urb = usb_get_from_anchor(&portdata->delayed))) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (!err) + data->in_flight++; + } +} + static int option_resume(struct usb_serial *serial) { - int err, i, j; + int i, j; struct usb_serial_port *port; - struct urb *urb; + struct option_intf_private *intfdata = serial->private; struct option_port_private *portdata; + struct urb *urb; + int err = 0; dbg("%s entered", __func__); /* get the interrupt URBs resubmitted unconditionally */ @@ -1253,7 +1348,7 @@ static int option_resume(struct usb_serial *serial) if (err < 0) { err("%s: Error %d for interrupt URB of port%d", __func__, err, i); - return err; + goto err_out; } } @@ -1261,27 +1356,32 @@ static int option_resume(struct usb_serial *serial) /* walk all ports */ port = serial->port[i]; portdata = usb_get_serial_port_data(port); - mutex_lock(&port->mutex); /* skip closed ports */ - if (!port->port.count) { - mutex_unlock(&port->mutex); + spin_lock_irq(&intfdata->susp_lock); + if (!portdata->opened) { + spin_unlock_irq(&intfdata->susp_lock); continue; } for (j = 0; j < N_IN_URB; j++) { urb = portdata->in_urbs[j]; - err = usb_submit_urb(urb, GFP_NOIO); + err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { - mutex_unlock(&port->mutex); err("%s: Error %d for bulk URB %d", __func__, err, i); - return err; + spin_unlock_irq(&intfdata->susp_lock); + goto err_out; } } - mutex_unlock(&port->mutex); + play_delayed(port); + spin_unlock_irq(&intfdata->susp_lock); } - return 0; + spin_lock_irq(&intfdata->susp_lock); + intfdata->suspended = 0; + spin_unlock_irq(&intfdata->susp_lock); +err_out: + return err; } #endif diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 3cece27325e..0f4a70ce382 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -141,11 +141,11 @@ struct oti6858_control_pkt { && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt)) /* function prototypes */ -static int oti6858_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port); static void oti6858_close(struct usb_serial_port *port); static void oti6858_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); +static void oti6858_init_termios(struct tty_struct *tty); static int oti6858_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static void oti6858_read_int_callback(struct urb *urb); @@ -186,6 +186,7 @@ static struct usb_serial_driver oti6858_device = { .write = oti6858_write, .ioctl = oti6858_ioctl, .set_termios = oti6858_set_termios, + .init_termios = oti6858_init_termios, .tiocmget = oti6858_tiocmget, .tiocmset = oti6858_tiocmset, .read_bulk_callback = oti6858_read_bulk_callback, @@ -206,7 +207,6 @@ struct oti6858_private { struct { u8 read_urb_in_use; u8 write_urb_in_use; - u8 termios_initialized; } flags; struct delayed_work delayed_write_work; @@ -447,6 +447,14 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty) return chars; } +static void oti6858_init_termios(struct tty_struct *tty) +{ + *(tty->termios) = tty_std_termios; + tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios->c_ispeed = 38400; + tty->termios->c_ospeed = 38400; +} + static void oti6858_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { @@ -464,16 +472,6 @@ static void oti6858_set_termios(struct tty_struct *tty, return; } - spin_lock_irqsave(&priv->lock, flags); - if (!priv->flags.termios_initialized) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 38400; - tty->termios->c_ospeed = 38400; - priv->flags.termios_initialized = 1; - } - spin_unlock_irqrestore(&priv->lock, flags); - cflag = tty->termios->c_cflag; spin_lock_irqsave(&priv->lock, flags); @@ -566,8 +564,7 @@ static void oti6858_set_termios(struct tty_struct *tty, spin_unlock_irqrestore(&priv->lock, flags); } -static int oti6858_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) { struct oti6858_private *priv = usb_get_serial_port_data(port); struct ktermios tmp_termios; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 3e86815b270..1128e01525b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -96,6 +96,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, + { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -527,6 +528,12 @@ static void pl2303_set_termios(struct tty_struct *tty, int baud; int i; u8 control; + const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600, + 4800, 7200, 9600, 14400, 19200, 28800, 38400, + 57600, 115200, 230400, 460800, 614400, + 921600, 1228800, 2457600, 3000000, 6000000 }; + int baud_floor, baud_ceil; + int k; dbg("%s - port %d", __func__, port->number); @@ -572,9 +579,39 @@ static void pl2303_set_termios(struct tty_struct *tty, dbg("%s - data bits = %d", __func__, buf[6]); } + /* For reference buf[0]:buf[3] baud rate value */ + /* NOTE: Only the values defined in baud_sup are supported ! + * => if unsupported values are set, the PL2303 seems to use + * 9600 baud (at least my PL2303X always does) + */ baud = tty_get_baud_rate(tty); - dbg("%s - baud = %d", __func__, baud); + dbg("%s - baud requested = %d", __func__, baud); if (baud) { + /* Set baudrate to nearest supported value */ + for (k=0; k<ARRAY_SIZE(baud_sup); k++) { + if (baud_sup[k] / baud) { + baud_ceil = baud_sup[k]; + if (k==0) { + baud = baud_ceil; + } else { + baud_floor = baud_sup[k-1]; + if ((baud_ceil % baud) + > (baud % baud_floor)) + baud = baud_floor; + else + baud = baud_ceil; + } + break; + } + } + if (baud > 1228800) { + /* type_0, type_1 only support up to 1228800 baud */ + if (priv->type != HX) + baud = 1228800; + else if (baud > 6000000) + baud = 6000000; + } + dbg("%s - baud set = %d", __func__, baud); buf[0] = baud & 0xff; buf[1] = (baud >> 8) & 0xff; buf[2] = (baud >> 16) & 0xff; @@ -585,8 +622,16 @@ static void pl2303_set_termios(struct tty_struct *tty, /* For reference buf[4]=1 is 1.5 stop bits */ /* For reference buf[4]=2 is 2 stop bits */ if (cflag & CSTOPB) { - buf[4] = 2; - dbg("%s - stop bits = 2", __func__); + /* NOTE: Comply with "real" UARTs / RS232: + * use 1.5 instead of 2 stop bits with 5 data bits + */ + if ((cflag & CSIZE) == CS5) { + buf[4] = 1; + dbg("%s - stop bits = 1.5", __func__); + } else { + buf[4] = 2; + dbg("%s - stop bits = 2", __func__); + } } else { buf[4] = 0; dbg("%s - stop bits = 1", __func__); @@ -599,11 +644,21 @@ static void pl2303_set_termios(struct tty_struct *tty, /* For reference buf[5]=3 is mark parity */ /* For reference buf[5]=4 is space parity */ if (cflag & PARODD) { - buf[5] = 1; - dbg("%s - parity = odd", __func__); + if (cflag & CMSPAR) { + buf[5] = 3; + dbg("%s - parity = mark", __func__); + } else { + buf[5] = 1; + dbg("%s - parity = odd", __func__); + } } else { - buf[5] = 2; - dbg("%s - parity = even", __func__); + if (cflag & CMSPAR) { + buf[5] = 4; + dbg("%s - parity = space", __func__); + } else { + buf[5] = 2; + dbg("%s - parity = even", __func__); + } } } else { buf[5] = 0; @@ -647,7 +702,7 @@ static void pl2303_set_termios(struct tty_struct *tty, pl2303_vendor_write(0x0, 0x0, serial); } - /* FIXME: Need to read back resulting baud rate */ + /* Save resulting baud rate */ if (baud) tty_encode_baud_rate(tty, baud, baud); @@ -691,8 +746,7 @@ static void pl2303_close(struct usb_serial_port *port) } -static int pl2303_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; @@ -714,8 +768,6 @@ static int pl2303_open(struct tty_struct *tty, if (tty) pl2303_set_termios(tty, port, &tmp_termios); - /* FIXME: need to assert RTS and DTR if CRTSCTS off */ - dbg("%s - submitting read urb", __func__); port->read_urb->dev = serial->dev; result = usb_submit_urb(port->read_urb, GFP_KERNEL); diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index ee9505e1dd9..d640dc95156 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -130,3 +130,7 @@ /* Sony, USB data cable for CMD-Jxx mobile phones */ #define SONY_VENDOR_ID 0x054c #define SONY_QN3USB_PRODUCT_ID 0x0437 + +/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */ +#define SANWA_VENDOR_ID 0x11ad +#define SANWA_PRODUCT_ID 0x0001 diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index f48d05e0acc..68fa0e43b78 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -51,6 +51,12 @@ struct sierra_iface_info { const u8 *ifaceinfo; /* pointer to the array holding the numbers */ }; +struct sierra_intf_private { + spinlock_t susp_lock; + unsigned int suspended:1; + int in_flight; +}; + static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) { int result; @@ -144,6 +150,7 @@ static int sierra_probe(struct usb_serial *serial, { int result = 0; struct usb_device *udev; + struct sierra_intf_private *data; u8 ifnum; udev = serial->dev; @@ -171,6 +178,11 @@ static int sierra_probe(struct usb_serial *serial, return -ENODEV; } + data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL); + if (!data) + return -ENOMEM; + spin_lock_init(&data->susp_lock); + return result; } @@ -261,13 +273,18 @@ static struct usb_driver sierra_driver = { .name = "sierra", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, .id_table = id_table, .no_dynamic_id = 1, + .supports_autosuspend = 1, }; struct sierra_port_private { spinlock_t lock; /* lock the structure */ int outstanding_urbs; /* number of out urbs in flight */ + struct usb_anchor active; + struct usb_anchor delayed; /* Input endpoints and buffers for this port */ struct urb *in_urbs[N_IN_URB]; @@ -279,6 +296,8 @@ struct sierra_port_private { int dsr_state; int dcd_state; int ri_state; + + unsigned int opened:1; }; static int sierra_send_setup(struct usb_serial_port *port) @@ -390,21 +409,25 @@ static void sierra_outdat_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; int status = urb->status; - unsigned long flags; dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); + intfdata = port->serial->private; /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree(urb->transfer_buffer); - + usb_autopm_put_interface_async(port->serial->interface); if (status) dev_dbg(&port->dev, "%s - nonzero write bulk status " "received: %d\n", __func__, status); - spin_lock_irqsave(&portdata->lock, flags); + spin_lock(&portdata->lock); --portdata->outstanding_urbs; - spin_unlock_irqrestore(&portdata->lock, flags); + spin_unlock(&portdata->lock); + spin_lock(&intfdata->susp_lock); + --intfdata->in_flight; + spin_unlock(&intfdata->susp_lock); usb_serial_port_softint(port); } @@ -414,6 +437,7 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; struct usb_serial *serial = port->serial; unsigned long flags; unsigned char *buffer; @@ -426,9 +450,9 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, return 0; portdata = usb_get_serial_port_data(port); + intfdata = serial->private; dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize); - spin_lock_irqsave(&portdata->lock, flags); dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__, portdata->outstanding_urbs); @@ -442,6 +466,14 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, portdata->outstanding_urbs); spin_unlock_irqrestore(&portdata->lock, flags); + retval = usb_autopm_get_interface_async(serial->interface); + if (retval < 0) { + spin_lock_irqsave(&portdata->lock, flags); + portdata->outstanding_urbs--; + spin_unlock_irqrestore(&portdata->lock, flags); + goto error_simple; + } + buffer = kmalloc(writesize, GFP_ATOMIC); if (!buffer) { dev_err(&port->dev, "out of memory\n"); @@ -468,14 +500,29 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, /* Handle the need to send a zero length packet */ urb->transfer_flags |= URB_ZERO_PACKET; + spin_lock_irqsave(&intfdata->susp_lock, flags); + + if (intfdata->suspended) { + usb_anchor_urb(urb, &portdata->delayed); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + goto skip_power; + } else { + usb_anchor_urb(urb, &portdata->active); + } /* send it down the pipe */ retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) { + usb_unanchor_urb(urb); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " "with status = %d\n", __func__, retval); goto error; + } else { + intfdata->in_flight++; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); } +skip_power: /* we are done with this urb, so let the host driver * really free it when it is finished with it */ usb_free_urb(urb); @@ -491,6 +538,8 @@ error_no_buffer: dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__, portdata->outstanding_urbs); spin_unlock_irqrestore(&portdata->lock, flags); + usb_autopm_put_interface_async(serial->interface); +error_simple: return retval; } @@ -530,6 +579,7 @@ static void sierra_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { + usb_mark_last_busy(port->serial->dev); err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dev_err(&port->dev, "resubmit read urb failed." @@ -591,6 +641,7 @@ static void sierra_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving IRQ data */ if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) { + usb_mark_last_busy(serial->dev); urb->dev = serial->dev; err = usb_submit_urb(urb, GFP_ATOMIC); if (err) @@ -711,6 +762,8 @@ static void sierra_close(struct usb_serial_port *port) int i; struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; + struct sierra_intf_private *intfdata = port->serial->private; + dev_dbg(&port->dev, "%s\n", __func__); portdata = usb_get_serial_port_data(port); @@ -723,6 +776,10 @@ static void sierra_close(struct usb_serial_port *port) if (!serial->disconnected) sierra_send_setup(port); mutex_unlock(&serial->disc_mutex); + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); + /* Stop reading urbs */ sierra_stop_rx_urbs(port); @@ -731,14 +788,16 @@ static void sierra_close(struct usb_serial_port *port) sierra_release_urb(portdata->in_urbs[i]); portdata->in_urbs[i] = NULL; } + usb_autopm_get_interface(serial->interface); + serial->interface->needs_remote_wakeup = 0; } } -static int sierra_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) { struct sierra_port_private *portdata; struct usb_serial *serial = port->serial; + struct sierra_intf_private *intfdata = serial->private; int i; int err; int endpoint; @@ -772,6 +831,12 @@ static int sierra_open(struct tty_struct *tty, } sierra_send_setup(port); + serial->interface->needs_remote_wakeup = 1; + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 1; + spin_unlock_irq(&intfdata->susp_lock); + usb_autopm_put_interface(serial->interface); + return 0; } @@ -819,6 +884,8 @@ static int sierra_startup(struct usb_serial *serial) return -ENOMEM; } spin_lock_init(&portdata->lock); + init_usb_anchor(&portdata->active); + init_usb_anchor(&portdata->delayed); /* Set the port private data pointer */ usb_set_serial_port_data(port, portdata); } @@ -845,6 +912,83 @@ static void sierra_release(struct usb_serial *serial) } } +static void stop_read_write_urbs(struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct sierra_port_private *portdata; + + /* Stop reading/writing urbs */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + for (j = 0; j < N_IN_URB; j++) + usb_kill_urb(portdata->in_urbs[j]); + usb_kill_anchored_urbs(&portdata->active); + } +} + +static int sierra_suspend(struct usb_serial *serial, pm_message_t message) +{ + struct sierra_intf_private *intfdata; + int b; + + if (serial->dev->auto_pm) { + intfdata = serial->private; + spin_lock_irq(&intfdata->susp_lock); + b = intfdata->in_flight; + + if (b) { + spin_unlock_irq(&intfdata->susp_lock); + return -EBUSY; + } else { + intfdata->suspended = 1; + spin_unlock_irq(&intfdata->susp_lock); + } + } + stop_read_write_urbs(serial); + + return 0; +} + +static int sierra_resume(struct usb_serial *serial) +{ + struct usb_serial_port *port; + struct sierra_intf_private *intfdata = serial->private; + struct sierra_port_private *portdata; + struct urb *urb; + int ec = 0; + int i, err; + + spin_lock_irq(&intfdata->susp_lock); + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + + while ((urb = usb_get_from_anchor(&portdata->delayed))) { + usb_anchor_urb(urb, &portdata->active); + intfdata->in_flight++; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + intfdata->in_flight--; + usb_unanchor_urb(urb); + usb_scuttle_anchored_urbs(&portdata->delayed); + break; + } + } + + if (portdata->opened) { + err = sierra_submit_rx_urbs(port, GFP_ATOMIC); + if (err) + ec++; + } + } + intfdata->suspended = 0; + spin_unlock_irq(&intfdata->susp_lock); + + return ec ? -EIO : 0; +} + static struct usb_serial_driver sierra_device = { .driver = { .owner = THIS_MODULE, @@ -865,6 +1009,8 @@ static struct usb_serial_driver sierra_device = { .tiocmset = sierra_tiocmset, .attach = sierra_startup, .release = sierra_release, + .suspend = sierra_suspend, + .resume = sierra_resume, .read_int_callback = sierra_instat_callback, }; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 3c249d8e8b8..1e58220403d 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -299,7 +299,6 @@ struct spcp8x5_private { wait_queue_head_t delta_msr_wait; u8 line_control; u8 line_status; - u8 termios_initialized; }; /* desc : when device plug in,this function would be called. @@ -498,6 +497,15 @@ static void spcp8x5_close(struct usb_serial_port *port) dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result); } +static void spcp8x5_init_termios(struct tty_struct *tty) +{ + /* for the 1st time call this function */ + *(tty->termios) = tty_std_termios; + tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios->c_ispeed = 115200; + tty->termios->c_ospeed = 115200; +} + /* set the serial param for transfer. we should check if we really need to * transfer. if we set flow control we should do this too. */ static void spcp8x5_set_termios(struct tty_struct *tty, @@ -514,16 +522,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, int i; u8 control; - /* for the 1st time call this function */ - spin_lock_irqsave(&priv->lock, flags); - if (!priv->termios_initialized) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 115200; - tty->termios->c_ospeed = 115200; - priv->termios_initialized = 1; - } - spin_unlock_irqrestore(&priv->lock, flags); /* check that they really want us to change something */ if (!tty_termios_hw_change(tty->termios, old_termios)) @@ -546,7 +544,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, } /* Set Baud Rate */ - baud = tty_get_baud_rate(tty);; + baud = tty_get_baud_rate(tty); switch (baud) { case 300: buf[0] = 0x00; break; case 600: buf[0] = 0x01; break; @@ -623,8 +621,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, /* open the serial port. do some usb system call. set termios and get the line * status of the device. then submit the read urb */ -static int spcp8x5_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; @@ -658,8 +655,6 @@ static int spcp8x5_open(struct tty_struct *tty, priv->line_status = status & 0xf0 ; spin_unlock_irqrestore(&priv->lock, flags); - /* FIXME: need to assert RTS and DTR if CRTSCTS off */ - dbg("%s - submitting read urb", __func__); port->read_urb->dev = serial->dev; ret = usb_submit_urb(port->read_urb, GFP_KERNEL); @@ -1011,6 +1006,7 @@ static struct usb_serial_driver spcp8x5_device = { .carrier_raised = spcp8x5_carrier_raised, .write = spcp8x5_write, .set_termios = spcp8x5_set_termios, + .init_termios = spcp8x5_init_termios, .ioctl = spcp8x5_ioctl, .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 6157fac9366..cb7e95f9fcb 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -124,8 +124,7 @@ exit: spin_unlock(&priv->lock); } -static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port) { struct symbol_private *priv = usb_get_serial_data(port->serial); unsigned long flags; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 3bc609fe224..1e9dc882169 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -98,8 +98,7 @@ struct ti_device { static int ti_startup(struct usb_serial *serial); static void ti_release(struct usb_serial *serial); -static int ti_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file); +static int ti_open(struct tty_struct *tty, struct usb_serial_port *port); static void ti_close(struct usb_serial_port *port); static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count); @@ -492,8 +491,7 @@ static void ti_release(struct usb_serial *serial) } -static int ti_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *file) +static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ti_port *tport = usb_get_serial_port_data(port); struct ti_device *tdev; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 99188c92068..ff75a3589e7 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -35,6 +35,7 @@ #include <linux/serial.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/kfifo.h> #include "pl2303.h" /* @@ -43,8 +44,6 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" #define DRIVER_DESC "USB Serial Driver core" -static void port_free(struct usb_serial_port *port); - /* Driver structure we register with the USB core */ static struct usb_driver usb_serial_driver = { .name = "usbserial", @@ -68,6 +67,11 @@ static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; static DEFINE_MUTEX(table_lock); static LIST_HEAD(usb_serial_driver_list); +/* + * Look up the serial structure. If it is found and it hasn't been + * disconnected, return with its disc_mutex held and its refcount + * incremented. Otherwise return NULL. + */ struct usb_serial *usb_serial_get_by_index(unsigned index) { struct usb_serial *serial; @@ -75,8 +79,15 @@ struct usb_serial *usb_serial_get_by_index(unsigned index) mutex_lock(&table_lock); serial = serial_table[index]; - if (serial) - kref_get(&serial->kref); + if (serial) { + mutex_lock(&serial->disc_mutex); + if (serial->disconnected) { + mutex_unlock(&serial->disc_mutex); + serial = NULL; + } else { + kref_get(&serial->kref); + } + } mutex_unlock(&table_lock); return serial; } @@ -125,8 +136,10 @@ static void return_serial(struct usb_serial *serial) dbg("%s", __func__); + mutex_lock(&table_lock); for (i = 0; i < serial->num_ports; ++i) serial_table[serial->minor + i] = NULL; + mutex_unlock(&table_lock); } static void destroy_serial(struct kref *kref) @@ -145,244 +158,224 @@ static void destroy_serial(struct kref *kref) serial->type->release(serial); - for (i = 0; i < serial->num_ports; ++i) { + /* Now that nothing is using the ports, they can be freed */ + for (i = 0; i < serial->num_port_pointers; ++i) { port = serial->port[i]; - if (port) + if (port) { + port->serial = NULL; put_device(&port->dev); - } - - /* If this is a "fake" port, we have to clean it up here, as it will - * not get cleaned up in port_release() as it was never registered with - * the driver core */ - if (serial->num_ports < serial->num_port_pointers) { - for (i = serial->num_ports; - i < serial->num_port_pointers; ++i) { - port = serial->port[i]; - if (port) - port_free(port); } } usb_put_dev(serial->dev); - - /* free up any memory that we allocated */ kfree(serial); } void usb_serial_put(struct usb_serial *serial) { - mutex_lock(&table_lock); kref_put(&serial->kref, destroy_serial); - mutex_unlock(&table_lock); } /***************************************************************************** * Driver tty interface functions *****************************************************************************/ -static int serial_open (struct tty_struct *tty, struct file *filp) + +/** + * serial_install - install tty + * @driver: the driver (USB in our case) + * @tty: the tty being created + * + * Create the termios objects for this tty. We use the default + * USB serial settings but permit them to be overridden by + * serial->type->init_termios. + * + * This is the first place a new tty gets used. Hence this is where we + * acquire references to the usb_serial structure and the driver module, + * where we store a pointer to the port, and where we do an autoresume. + * All these actions are reversed in serial_release(). + */ +static int serial_install(struct tty_driver *driver, struct tty_struct *tty) { + int idx = tty->index; struct usb_serial *serial; struct usb_serial_port *port; - unsigned int portNumber; - int retval = 0; - int first = 0; + int retval = -ENODEV; dbg("%s", __func__); - /* get the serial object associated with this tty pointer */ - serial = usb_serial_get_by_index(tty->index); - if (!serial) { - tty->driver_data = NULL; - return -ENODEV; - } + serial = usb_serial_get_by_index(idx); + if (!serial) + return retval; - mutex_lock(&serial->disc_mutex); - portNumber = tty->index - serial->minor; - port = serial->port[portNumber]; - if (!port || serial->disconnected) - retval = -ENODEV; - else - get_device(&port->dev); - /* - * Note: Our locking order requirement does not allow port->mutex - * to be acquired while serial->disc_mutex is held. - */ - mutex_unlock(&serial->disc_mutex); + port = serial->port[idx - serial->minor]; + if (!port) + goto error_no_port; + if (!try_module_get(serial->type->driver.owner)) + goto error_module_get; + + /* perform the standard setup */ + retval = tty_init_termios(tty); if (retval) - goto bailout_serial_put; + goto error_init_termios; - if (mutex_lock_interruptible(&port->mutex)) { - retval = -ERESTARTSYS; - goto bailout_port_put; - } + retval = usb_autopm_get_interface(serial->interface); + if (retval) + goto error_get_interface; - ++port->port.count; + mutex_unlock(&serial->disc_mutex); + + /* allow the driver to update the settings */ + if (serial->type->init_termios) + serial->type->init_termios(tty); - /* set up our port structure making the tty driver - * remember our port object, and us it */ tty->driver_data = port; - tty_port_tty_set(&port->port, tty); - /* If the console is attached, the device is already open */ - if (port->port.count == 1 && !port->console) { - first = 1; - /* lock this module before we call it - * this may fail, which means we must bail out, - * safe because we are called with BKL held */ - if (!try_module_get(serial->type->driver.owner)) { - retval = -ENODEV; - goto bailout_mutex_unlock; - } + /* Final install (we use the default method) */ + tty_driver_kref_get(driver); + tty->count++; + driver->ttys[idx] = tty; + return retval; + + error_get_interface: + error_init_termios: + module_put(serial->type->driver.owner); + error_module_get: + error_no_port: + usb_serial_put(serial); + mutex_unlock(&serial->disc_mutex); + return retval; +} +static int serial_open(struct tty_struct *tty, struct file *filp) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + int retval; + + dbg("%s - port %d", __func__, port->number); + + spin_lock_irq(&port->port.lock); + if (!tty_hung_up_p(filp)) + ++port->port.count; + spin_unlock_irq(&port->port.lock); + tty_port_tty_set(&port->port, tty); + + /* Do the device-specific open only if the hardware isn't + * already initialized. + */ + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) { + if (mutex_lock_interruptible(&port->mutex)) + return -ERESTARTSYS; mutex_lock(&serial->disc_mutex); if (serial->disconnected) retval = -ENODEV; else - retval = usb_autopm_get_interface(serial->interface); - if (retval) - goto bailout_module_put; - - /* only call the device specific open if this - * is the first time the port is opened */ - retval = serial->type->open(tty, port, filp); - if (retval) - goto bailout_interface_put; + retval = port->serial->type->open(tty, port); mutex_unlock(&serial->disc_mutex); + mutex_unlock(&port->mutex); + if (retval) + return retval; set_bit(ASYNCB_INITIALIZED, &port->port.flags); } - mutex_unlock(&port->mutex); + /* Now do the correct tty layer semantics */ retval = tty_port_block_til_ready(&port->port, tty, filp); - if (retval == 0) { - if (!first) - usb_serial_put(serial); - return 0; - } - mutex_lock(&port->mutex); - if (first == 0) - goto bailout_mutex_unlock; - /* Undo the initial port actions */ - mutex_lock(&serial->disc_mutex); -bailout_interface_put: - usb_autopm_put_interface(serial->interface); -bailout_module_put: - mutex_unlock(&serial->disc_mutex); - module_put(serial->type->driver.owner); -bailout_mutex_unlock: - port->port.count = 0; - tty->driver_data = NULL; - tty_port_tty_set(&port->port, NULL); - mutex_unlock(&port->mutex); -bailout_port_put: - put_device(&port->dev); -bailout_serial_put: - usb_serial_put(serial); return retval; } /** - * serial_do_down - shut down hardware - * @port: port to shut down - * - * Shut down a USB port unless it is the console. We never shut down the - * console hardware as it will always be in use. + * serial_down - shut down hardware + * @port: port to shut down * - * Don't free any resources at this point + * Shut down a USB serial port unless it is the console. We never + * shut down the console hardware as it will always be in use. */ -static void serial_do_down(struct usb_serial_port *port) +static void serial_down(struct usb_serial_port *port) { struct usb_serial_driver *drv = port->serial->type; - struct usb_serial *serial; - struct module *owner; - /* The console is magical, do not hang up the console hardware - or there will be tears */ + /* + * The console is magical. Do not hang up the console hardware + * or there will be tears. + */ if (port->console) return; - mutex_lock(&port->mutex); - serial = port->serial; - owner = serial->type->driver.owner; + /* Don't call the close method if the hardware hasn't been + * initialized. + */ + if (!test_and_clear_bit(ASYNCB_INITIALIZED, &port->port.flags)) + return; + mutex_lock(&port->mutex); if (drv->close) drv->close(port); - mutex_unlock(&port->mutex); } -/** - * serial_do_free - free resources post close/hangup - * @port: port to free up - * - * Do the resource freeing and refcount dropping for the port. We must - * be careful about ordering and we must avoid freeing up the console. - */ - -static void serial_do_free(struct usb_serial_port *port) +static void serial_hangup(struct tty_struct *tty) { - struct usb_serial *serial; - struct module *owner; + struct usb_serial_port *port = tty->driver_data; - /* The console is magical, do not hang up the console hardware - or there will be tears */ - if (port->console) - return; + dbg("%s - port %d", __func__, port->number); - serial = port->serial; - owner = serial->type->driver.owner; - put_device(&port->dev); - /* Mustn't dereference port any more */ - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - usb_autopm_put_interface(serial->interface); - mutex_unlock(&serial->disc_mutex); - usb_serial_put(serial); - /* Mustn't dereference serial any more */ - module_put(owner); + serial_down(port); + tty_port_hangup(&port->port); } static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - if (!port) - return; - dbg("%s - port %d", __func__, port->number); - /* FIXME: - This leaves a very narrow race. Really we should do the - serial_do_free() on tty->shutdown(), but tty->shutdown can - be called from IRQ context and serial_do_free can sleep. - - The right fix is probably to make the tty free (which is rare) - and thus tty->shutdown() occur via a work queue and simplify all - the drivers that use it. - */ - if (tty_hung_up_p(filp)) { - /* serial_hangup already called serial_down at this point. - Another user may have already reopened the port but - serial_do_free is refcounted */ - serial_do_free(port); + if (tty_hung_up_p(filp)) return; - } - if (tty_port_close_start(&port->port, tty, filp) == 0) return; - - serial_do_down(port); + serial_down(port); tty_port_close_end(&port->port, tty); tty_port_tty_set(&port->port, NULL); - serial_do_free(port); } -static void serial_hangup(struct tty_struct *tty) +/** + * serial_release - free resources post close/hangup + * @port: port to free up + * + * Do the resource freeing and refcount dropping for the port. + * Avoid freeing the console. + * + * Called when the last tty kref is dropped. + */ +static void serial_release(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - serial_do_down(port); - tty_port_hangup(&port->port); - /* We must not free port yet - the USB serial layer depends on it's - continued existence */ + struct usb_serial *serial; + struct module *owner; + + /* The console is magical. Do not hang up the console hardware + * or there will be tears. + */ + if (port->console) + return; + + dbg("%s - port %d", __func__, port->number); + + /* Standard shutdown processing */ + tty_shutdown(tty); + + tty->driver_data = NULL; + + serial = port->serial; + owner = serial->type->driver.owner; + + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + usb_autopm_put_interface(serial->interface); + mutex_unlock(&serial->disc_mutex); + + usb_serial_put(serial); + module_put(owner); } static int serial_write(struct tty_struct *tty, const unsigned char *buf, @@ -527,6 +520,7 @@ static int serial_proc_show(struct seq_file *m, void *v) seq_putc(m, '\n'); usb_serial_put(serial); + mutex_unlock(&serial->disc_mutex); } return 0; } @@ -596,14 +590,6 @@ static void usb_serial_port_work(struct work_struct *work) tty_kref_put(tty); } -static void port_release(struct device *dev) -{ - struct usb_serial_port *port = to_usb_serial_port(dev); - - dbg ("%s - %s", __func__, dev_name(dev)); - port_free(port); -} - static void kill_traffic(struct usb_serial_port *port) { usb_kill_urb(port->read_urb); @@ -623,8 +609,12 @@ static void kill_traffic(struct usb_serial_port *port) usb_kill_urb(port->interrupt_out_urb); } -static void port_free(struct usb_serial_port *port) +static void port_release(struct device *dev) { + struct usb_serial_port *port = to_usb_serial_port(dev); + + dbg ("%s - %s", __func__, dev_name(dev)); + /* * Stop all the traffic before cancelling the work, so that * nobody will restart it by calling usb_serial_port_softint. @@ -636,6 +626,8 @@ static void port_free(struct usb_serial_port *port) usb_free_urb(port->write_urb); usb_free_urb(port->interrupt_in_urb); usb_free_urb(port->interrupt_out_urb); + if (!IS_ERR(port->write_fifo) && port->write_fifo) + kfifo_free(port->write_fifo); kfree(port->bulk_in_buffer); kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); @@ -935,6 +927,11 @@ int usb_serial_probe(struct usb_interface *interface, mutex_init(&port->mutex); INIT_WORK(&port->work, usb_serial_port_work); serial->port[i] = port; + port->dev.parent = &interface->dev; + port->dev.driver = NULL; + port->dev.bus = &usb_serial_bus_type; + port->dev.release = &port_release; + device_initialize(&port->dev); } /* set up the endpoint information */ @@ -970,6 +967,10 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; } + port->write_fifo = kfifo_alloc(PAGE_SIZE, GFP_KERNEL, + &port->lock); + if (IS_ERR(port->write_fifo)) + goto probe_error; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->bulk_out_size = buffer_size; port->bulk_out_endpointAddress = endpoint->bEndpointAddress; @@ -1077,15 +1078,10 @@ int usb_serial_probe(struct usb_interface *interface, /* register all of the individual ports with the driver core */ for (i = 0; i < num_ports; ++i) { port = serial->port[i]; - port->dev.parent = &interface->dev; - port->dev.driver = NULL; - port->dev.bus = &usb_serial_bus_type; - port->dev.release = &port_release; - dev_set_name(&port->dev, "ttyUSB%d", port->number); dbg ("%s - registering %s", __func__, dev_name(&port->dev)); port->dev_state = PORT_REGISTERING; - retval = device_register(&port->dev); + retval = device_add(&port->dev); if (retval) { dev_err(&port->dev, "Error registering port device, " "continuing\n"); @@ -1103,39 +1099,7 @@ exit: return 0; probe_error: - for (i = 0; i < num_bulk_in; ++i) { - port = serial->port[i]; - if (!port) - continue; - usb_free_urb(port->read_urb); - kfree(port->bulk_in_buffer); - } - for (i = 0; i < num_bulk_out; ++i) { - port = serial->port[i]; - if (!port) - continue; - usb_free_urb(port->write_urb); - kfree(port->bulk_out_buffer); - } - for (i = 0; i < num_interrupt_in; ++i) { - port = serial->port[i]; - if (!port) - continue; - usb_free_urb(port->interrupt_in_urb); - kfree(port->interrupt_in_buffer); - } - for (i = 0; i < num_interrupt_out; ++i) { - port = serial->port[i]; - if (!port) - continue; - usb_free_urb(port->interrupt_out_urb); - kfree(port->interrupt_out_buffer); - } - - /* free up any memory that we allocated */ - for (i = 0; i < serial->num_port_pointers; ++i) - kfree(serial->port[i]); - kfree(serial); + usb_serial_put(serial); return -EIO; } EXPORT_SYMBOL_GPL(usb_serial_probe); @@ -1161,10 +1125,7 @@ void usb_serial_disconnect(struct usb_interface *interface) if (port) { struct tty_struct *tty = tty_port_tty_get(&port->port); if (tty) { - /* The hangup will occur asynchronously but - the object refcounts will sort out all the - cleanup */ - tty_hangup(tty); + tty_vhangup(tty); tty_kref_put(tty); } kill_traffic(port); @@ -1189,8 +1150,7 @@ void usb_serial_disconnect(struct usb_interface *interface) } serial->type->disconnect(serial); - /* let the last holder of this object - * cause it to be cleaned up */ + /* let the last holder of this object cause it to be cleaned up */ usb_serial_put(serial); dev_info(dev, "device disconnected\n"); } @@ -1204,15 +1164,19 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) serial->suspending = 1; + if (serial->type->suspend) { + r = serial->type->suspend(serial, message); + if (r < 0) + goto err_out; + } + for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (port) kill_traffic(port); } - if (serial->type->suspend) - r = serial->type->suspend(serial, message); - +err_out: return r; } EXPORT_SYMBOL(usb_serial_suspend); @@ -1246,6 +1210,8 @@ static const struct tty_operations serial_ops = { .chars_in_buffer = serial_chars_in_buffer, .tiocmget = serial_tiocmget, .tiocmset = serial_tiocmset, + .shutdown = serial_release, + .install = serial_install, .proc_fops = &serial_proc_fops, }; diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index 614800972dc..7b5bfc4edd3 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -43,11 +43,10 @@ static struct usb_driver debug_driver = { .no_dynamic_id = 1, }; -static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port) { port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE; - return usb_serial_generic_open(tty, port, filp); + return usb_serial_generic_open(tty, port); } /* This HW really does not support a serial break, so one will be diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index f5d0f64dcc5..1aa5d20a5d9 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -36,8 +36,7 @@ #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" /* function prototypes for a handspring visor */ -static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static int visor_open(struct tty_struct *tty, struct usb_serial_port *port); static void visor_close(struct usb_serial_port *port); static int visor_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -273,8 +272,7 @@ static int stats; /****************************************************************************** * Handspring Visor specific driver functions ******************************************************************************/ -static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int visor_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct visor_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 8d126dd7a02..62424eec33e 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -146,7 +146,7 @@ static int whiteheat_firmware_attach(struct usb_serial *serial); static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_release(struct usb_serial *serial); static int whiteheat_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); + struct usb_serial_port *port); static void whiteheat_close(struct usb_serial_port *port); static int whiteheat_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -259,7 +259,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize); static int firm_open(struct usb_serial_port *port); static int firm_close(struct usb_serial_port *port); -static int firm_setup_port(struct tty_struct *tty); +static void firm_setup_port(struct tty_struct *tty); static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); static int firm_set_break(struct usb_serial_port *port, __u8 onoff); @@ -659,8 +659,7 @@ static void whiteheat_release(struct usb_serial *serial) return; } -static int whiteheat_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) { int retval = 0; @@ -1211,7 +1210,7 @@ static int firm_close(struct usb_serial_port *port) } -static int firm_setup_port(struct tty_struct *tty) +static void firm_setup_port(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_port_settings port_settings; @@ -1286,7 +1285,7 @@ static int firm_setup_port(struct tty_struct *tty) port_settings.lloop = 0; /* now send the message to the device */ - return firm_send_command(port, WHITEHEAT_SETUP_PORT, + firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings)); } |