diff options
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 37 | ||||
-rw-r--r-- | drivers/usb/serial/generic.c | 12 | ||||
-rw-r--r-- | drivers/usb/serial/mos7840.c | 32 | ||||
-rw-r--r-- | drivers/usb/serial/option.c | 27 | ||||
-rw-r--r-- | drivers/usb/serial/pl2303.c | 30 | ||||
-rw-r--r-- | drivers/usb/serial/spcp8x5.c | 30 |
6 files changed, 97 insertions, 71 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9ced8937a8f..fb0d537435e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2123,6 +2123,20 @@ static void ftdi_set_termios(struct tty_struct *tty, termios->c_cflag |= CRTSCTS; } + /* + * All FTDI UART chips are limited to CS7/8. We won't pretend to + * support CS5/6 and revert the CSIZE setting instead. + */ + if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) { + dev_warn(ddev, "requested CSIZE setting not supported\n"); + + termios->c_cflag &= ~CSIZE; + if (old_termios) + termios->c_cflag |= old_termios->c_cflag & CSIZE; + else + termios->c_cflag |= CS8; + } + cflag = termios->c_cflag; if (!old_termios) @@ -2159,19 +2173,16 @@ no_skip: } else { urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE; } - if (cflag & CSIZE) { - switch (cflag & CSIZE) { - case CS7: - urb_value |= 7; - dev_dbg(ddev, "Setting CS7\n"); - break; - case CS8: - urb_value |= 8; - dev_dbg(ddev, "Setting CS8\n"); - break; - default: - dev_err(ddev, "CSIZE was set but not CS7-CS8\n"); - } + switch (cflag & CSIZE) { + case CS7: + urb_value |= 7; + dev_dbg(ddev, "Setting CS7\n"); + break; + default: + case CS8: + urb_value |= 8; + dev_dbg(ddev, "Setting CS8\n"); + break; } /* This is needed by the break command since it uses the same command diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 2b01ec8651c..b63ce023f96 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -173,16 +173,8 @@ retry: clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); return result; } - /* - * Try sending off another urb, unless called from completion handler - * (in which case there will be no free urb or no data). - */ - if (mem_flags != GFP_ATOMIC) - goto retry; - clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); - - return 0; + goto retry; /* try sending off another urb */ } EXPORT_SYMBOL_GPL(usb_serial_generic_write_start); @@ -208,7 +200,7 @@ int usb_serial_generic_write(struct tty_struct *tty, return 0; count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); - result = usb_serial_generic_write_start(port, GFP_KERNEL); + result = usb_serial_generic_write_start(port, GFP_ATOMIC); if (result) return result; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index e5bdd987b9e..a69da83604c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1813,25 +1813,25 @@ static void mos7840_change_port_settings(struct tty_struct *tty, iflag = tty->termios.c_iflag; /* Change the number of bits */ - if (cflag & CSIZE) { - switch (cflag & CSIZE) { - case CS5: - lData = LCR_BITS_5; - break; + switch (cflag & CSIZE) { + case CS5: + lData = LCR_BITS_5; + break; - case CS6: - lData = LCR_BITS_6; - break; + case CS6: + lData = LCR_BITS_6; + break; - case CS7: - lData = LCR_BITS_7; - break; - default: - case CS8: - lData = LCR_BITS_8; - break; - } + case CS7: + lData = LCR_BITS_7; + break; + + default: + case CS8: + lData = LCR_BITS_8; + break; } + /* Change the Parity bit */ if (cflag & PARENB) { if (cflag & PARODD) { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c3d94853b4a..496b7e39d5b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -85,6 +85,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_K4605 0x14C6 +#define HUAWEI_PRODUCT_E173S6 0x1C07 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -572,6 +573,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) }, @@ -634,6 +637,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) }, @@ -688,6 +695,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) }, @@ -742,6 +753,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7A) }, @@ -796,6 +811,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7A) }, @@ -850,6 +869,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7A) }, @@ -904,6 +927,10 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6D) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6E) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x75) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x78) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x79) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7A) }, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 1e6de4cd079..1e3318dfa1c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -361,23 +361,21 @@ static void pl2303_set_termios(struct tty_struct *tty, 0, 0, buf, 7, 100); dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf); - if (C_CSIZE(tty)) { - switch (C_CSIZE(tty)) { - case CS5: - buf[6] = 5; - break; - case CS6: - buf[6] = 6; - break; - case CS7: - buf[6] = 7; - break; - default: - case CS8: - buf[6] = 8; - } - dev_dbg(&port->dev, "data bits = %d\n", buf[6]); + switch (C_CSIZE(tty)) { + case CS5: + buf[6] = 5; + break; + case CS6: + buf[6] = 6; + break; + case CS7: + buf[6] = 7; + break; + default: + case CS8: + buf[6] = 8; } + dev_dbg(&port->dev, "data bits = %d\n", buf[6]); /* For reference buf[0]:buf[3] baud rate value */ pl2303_encode_baudrate(tty, port, &buf[0]); diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 4abac28b599..5b793c35226 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -348,22 +348,20 @@ static void spcp8x5_set_termios(struct tty_struct *tty, } /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ - if (cflag & CSIZE) { - switch (cflag & CSIZE) { - case CS5: - buf[1] |= SET_UART_FORMAT_SIZE_5; - break; - case CS6: - buf[1] |= SET_UART_FORMAT_SIZE_6; - break; - case CS7: - buf[1] |= SET_UART_FORMAT_SIZE_7; - break; - default: - case CS8: - buf[1] |= SET_UART_FORMAT_SIZE_8; - break; - } + switch (cflag & CSIZE) { + case CS5: + buf[1] |= SET_UART_FORMAT_SIZE_5; + break; + case CS6: + buf[1] |= SET_UART_FORMAT_SIZE_6; + break; + case CS7: + buf[1] |= SET_UART_FORMAT_SIZE_7; + break; + default: + case CS8: + buf[1] |= SET_UART_FORMAT_SIZE_8; + break; } /* Set Stop bit2 : 0:1bit 1:2bit */ |