summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/console.c16
-rw-r--r--drivers/usb/serial/cp210x.c5
-rw-r--r--drivers/usb/serial/generic.c4
-rw-r--r--drivers/usb/serial/keyspan.c20
-rw-r--r--drivers/usb/serial/mos7840.c60
-rw-r--r--drivers/usb/serial/option.c69
-rw-r--r--drivers/usb/serial/qcserial.c1
7 files changed, 55 insertions, 120 deletions
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 8d7fc48b1f3..29fa1c3d008 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -46,6 +46,8 @@ static struct console usbcons;
* ------------------------------------------------------------
*/
+static const struct tty_operations usb_console_fake_tty_ops = {
+};
/*
* The parsing of the command line works exactly like the
@@ -137,13 +139,17 @@ static int usb_console_setup(struct console *co, char *options)
goto reset_open_count;
}
kref_init(&tty->kref);
- tty_port_tty_set(&port->port, tty);
tty->driver = usb_serial_tty_driver;
tty->index = co->index;
+ init_ldsem(&tty->ldisc_sem);
+ INIT_LIST_HEAD(&tty->tty_files);
+ kref_get(&tty->driver->kref);
+ tty->ops = &usb_console_fake_tty_ops;
if (tty_init_termios(tty)) {
retval = -ENOMEM;
- goto free_tty;
+ goto put_tty;
}
+ tty_port_tty_set(&port->port, tty);
}
/* only call the device specific open if this
@@ -161,7 +167,7 @@ static int usb_console_setup(struct console *co, char *options)
serial->type->set_termios(tty, port, &dummy);
tty_port_tty_set(&port->port, NULL);
- kfree(tty);
+ tty_kref_put(tty);
}
set_bit(ASYNCB_INITIALIZED, &port->port.flags);
}
@@ -177,8 +183,8 @@ static int usb_console_setup(struct console *co, char *options)
fail:
tty_port_tty_set(&port->port, NULL);
- free_tty:
- kfree(tty);
+ put_tty:
+ tty_kref_put(tty);
reset_open_count:
port->port.count = 0;
usb_autopm_put_interface(serial->interface);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 6c4eb3cf5ef..f40c856ff75 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -56,6 +56,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+ { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
@@ -120,10 +121,12 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
- { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */
+ { USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */
+ { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */
{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 1bd192290b0..ccf1df7c4b8 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -286,7 +286,7 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
res = usb_submit_urb(port->read_urbs[index], mem_flags);
if (res) {
- if (res != -EPERM) {
+ if (res != -EPERM && res != -ENODEV) {
dev_err(&port->dev,
"%s - usb_submit_urb failed: %d\n",
__func__, res);
@@ -373,7 +373,7 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
__func__, urb->status);
return;
default:
- dev_err(&port->dev, "%s - nonzero urb status: %d\n",
+ dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
__func__, urb->status);
goto resubmit;
}
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 077c714f128..e07b15ed581 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -410,6 +410,8 @@ static void usa26_instat_callback(struct urb *urb)
}
port = serial->port[msg->port];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -420,7 +422,7 @@ static void usa26_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
@@ -527,6 +529,8 @@ static void usa28_instat_callback(struct urb *urb)
}
port = serial->port[msg->port];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -537,7 +541,7 @@ static void usa28_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
@@ -607,6 +611,8 @@ static void usa49_instat_callback(struct urb *urb)
}
port = serial->port[msg->portNumber];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -617,7 +623,7 @@ static void usa49_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
@@ -855,6 +861,8 @@ static void usa90_instat_callback(struct urb *urb)
port = serial->port[0];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -865,7 +873,7 @@ static void usa90_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
@@ -926,6 +934,8 @@ static void usa67_instat_callback(struct urb *urb)
port = serial->port[msg->port];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
/* Update handshaking pin state information */
old_dcd_state = p_priv->dcd_state;
@@ -934,7 +944,7 @@ static void usa67_instat_callback(struct urb *urb)
if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
tty_port_tty_hangup(&port->port, true);
-
+resubmit:
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 220b4be8964..e4473a9109c 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1309,35 +1309,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *current_position = data;
unsigned char *data1;
-#ifdef NOTMOS7840
- Data = 0x00;
- status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
- mos7840_port->shadowLCR = Data;
- dev_dbg(&port->dev, "%s: LINE_CONTROL_REGISTER is %x\n", __func__, Data);
- dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
-
- /* Data = 0x03; */
- /* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */
- /* mos7840_port->shadowLCR=Data;//Need to add later */
-
- Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */
- status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
- /* Data = 0x0c; */
- /* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
- Data = 0x00;
- status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
- dev_dbg(&port->dev, "%s: DLL value is %x\n", __func__, Data);
-
- Data = 0x0;
- status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
- dev_dbg(&port->dev, "%s: DLM value is %x\n", __func__, Data);
-
- Data = Data & ~SERIAL_LCR_DLAB;
- dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
- status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-#endif
-
if (mos7840_port_paranoia_check(port, __func__))
return -1;
@@ -1614,37 +1585,6 @@ static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port,
*clk_sel_val = 0x70;
}
return 0;
-
-#ifdef NOTMCS7840
-
- for (i = 0; i < ARRAY_SIZE(mos7840_divisor_table); i++) {
- if (mos7840_divisor_table[i].BaudRate == baudrate) {
- *divisor = mos7840_divisor_table[i].Divisor;
- return 0;
- }
- }
-
- /* After trying for all the standard baud rates *
- * Try calculating the divisor for this baud rate */
-
- if (baudrate > 75 && baudrate < 230400) {
- /* get the divisor */
- custom = (__u16) (230400L / baudrate);
-
- /* Check for round off */
- round1 = (__u16) (2304000L / baudrate);
- round = (__u16) (round1 - (custom * 10));
- if (round > 4)
- custom++;
- *divisor = custom;
-
- dev_dbg(&port->dev, " Baud %d = %d\n", baudrate, custom);
- return 0;
- }
-
- dev_dbg(&port->dev, "%s", " Baud calculation Failed...\n");
- return -1;
-#endif
}
/*****************************************************************************
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 7a4c21b4f67..f0c0c53359a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -234,6 +234,8 @@ static void option_instat_callback(struct urb *urb);
#define QUALCOMM_VENDOR_ID 0x05C6
+#define SIERRA_VENDOR_ID 0x1199
+
#define CMOTECH_VENDOR_ID 0x16d8
#define CMOTECH_PRODUCT_6001 0x6001
#define CMOTECH_PRODUCT_CMU_300 0x6002
@@ -505,18 +507,10 @@ static void option_instat_callback(struct urb *urb);
#define VIATELECOM_VENDOR_ID 0x15eb
#define VIATELECOM_PRODUCT_CDS7 0x0001
-/* some devices interfaces need special handling due to a number of reasons */
-enum option_blacklist_reason {
- OPTION_BLACKLIST_NONE = 0,
- OPTION_BLACKLIST_SENDSETUP = 1,
- OPTION_BLACKLIST_RESERVED_IF = 2
-};
-
-#define MAX_BL_NUM 8
struct option_blacklist_info {
- /* bitfield of interface numbers for OPTION_BLACKLIST_SENDSETUP */
+ /* bitmask of interface numbers blacklisted for send_setup */
const unsigned long sendsetup;
- /* bitfield of interface numbers for OPTION_BLACKLIST_RESERVED_IF */
+ /* bitmask of interface numbers that are reserved */
const unsigned long reserved;
};
@@ -601,6 +595,11 @@ static const struct option_blacklist_info telit_le920_blacklist = {
.reserved = BIT(1) | BIT(5),
};
+static const struct option_blacklist_info sierra_mc73xx_blacklist = {
+ .sendsetup = BIT(0) | BIT(2),
+ .reserved = BIT(8) | BIT(10) | BIT(11),
+};
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1098,6 +1097,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
+ { USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x68c0, 0xff),
+ .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC73xx */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
@@ -1813,36 +1814,13 @@ struct option_private {
module_usb_serial_driver(serial_drivers, option_ids);
-static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
- const struct option_blacklist_info *blacklist)
-{
- unsigned long num;
- const unsigned long *intf_list;
-
- if (blacklist) {
- if (reason == OPTION_BLACKLIST_SENDSETUP)
- intf_list = &blacklist->sendsetup;
- else if (reason == OPTION_BLACKLIST_RESERVED_IF)
- intf_list = &blacklist->reserved;
- else {
- BUG_ON(reason);
- return false;
- }
-
- for_each_set_bit(num, intf_list, MAX_BL_NUM + 1) {
- if (num == ifnum)
- return true;
- }
- }
- return false;
-}
-
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
struct usb_interface_descriptor *iface_desc =
&serial->interface->cur_altsetting->desc;
struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
+ const struct option_blacklist_info *blacklist;
/* Never bind to the CD-Rom emulation interface */
if (iface_desc->bInterfaceClass == 0x08)
@@ -1853,10 +1831,9 @@ static int option_probe(struct usb_serial *serial,
* the same class/subclass/protocol as the serial interfaces. Look at
* the Windows driver .INF files for reserved interface numbers.
*/
- if (is_blacklisted(
- iface_desc->bInterfaceNumber,
- OPTION_BLACKLIST_RESERVED_IF,
- (const struct option_blacklist_info *) id->driver_info))
+ blacklist = (void *)id->driver_info;
+ if (blacklist && test_bit(iface_desc->bInterfaceNumber,
+ &blacklist->reserved))
return -ENODEV;
/*
* Don't bind network interface on Samsung GT-B3730, it is handled by
@@ -1867,8 +1844,8 @@ static int option_probe(struct usb_serial *serial,
iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
return -ENODEV;
- /* Store device id so we can use it during attach. */
- usb_set_serial_data(serial, (void *)id);
+ /* Store the blacklist info so we can use it during attach. */
+ usb_set_serial_data(serial, (void *)blacklist);
return 0;
}
@@ -1876,7 +1853,7 @@ static int option_probe(struct usb_serial *serial,
static int option_attach(struct usb_serial *serial)
{
struct usb_interface_descriptor *iface_desc;
- const struct usb_device_id *id;
+ const struct option_blacklist_info *blacklist;
struct usb_wwan_intf_private *data;
struct option_private *priv;
@@ -1890,16 +1867,16 @@ static int option_attach(struct usb_serial *serial)
return -ENOMEM;
}
- /* Retrieve device id stored at probe. */
- id = usb_get_serial_data(serial);
+ /* Retrieve blacklist info stored at probe. */
+ blacklist = usb_get_serial_data(serial);
+
iface_desc = &serial->interface->cur_altsetting->desc;
priv->bInterfaceNumber = iface_desc->bInterfaceNumber;
data->private = priv;
- if (!is_blacklisted(iface_desc->bInterfaceNumber,
- OPTION_BLACKLIST_SENDSETUP,
- (struct option_blacklist_info *)id->driver_info)) {
+ if (!blacklist || !test_bit(iface_desc->bInterfaceNumber,
+ &blacklist->sendsetup)) {
data->send_setup = option_send_setup;
}
spin_lock_init(&data->susp_lock);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index cb3e14780a7..9c63897b3a5 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -142,7 +142,6 @@ static const struct usb_device_id id_table[] = {
{DEVICE_SWI(0x0f3d, 0x68a2)}, /* Sierra Wireless MC7700 */
{DEVICE_SWI(0x114f, 0x68a2)}, /* Sierra Wireless MC7750 */
{DEVICE_SWI(0x1199, 0x68a2)}, /* Sierra Wireless MC7710 */
- {DEVICE_SWI(0x1199, 0x68c0)}, /* Sierra Wireless MC73xx */
{DEVICE_SWI(0x1199, 0x901c)}, /* Sierra Wireless EM7700 */
{DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */
{DEVICE_SWI(0x1199, 0x9040)}, /* Sierra Wireless Modem */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-27 20:00:50 +0000