summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage/scsiglue.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage/scsiglue.c')
-rw-r--r--drivers/usb/storage/scsiglue.c26
1 files changed, 14 insertions, 12 deletions
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 8c1e2954f3b..3fcde9f0fa5 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -73,6 +73,7 @@ static const char* host_info(struct Scsi_Host *host)
static int slave_alloc (struct scsi_device *sdev)
{
struct us_data *us = host_to_us(sdev->host);
+ struct usb_host_endpoint *bulk_in_ep;
/*
* Set the INQUIRY transfer length to 36. We don't use any of
@@ -84,12 +85,13 @@ static int slave_alloc (struct scsi_device *sdev)
/* Scatter-gather buffers (all but the last) must have a length
* divisible by the bulk maxpacket size. Otherwise a data packet
* would end up being short, causing a premature end to the data
- * transfer. Since high-speed bulk pipes have a maxpacket size
- * of 512, we'll use that as the scsi device queue's DMA alignment
- * mask. Guaranteeing proper alignment of the first buffer will
- * have the desired effect because, except at the beginning and
- * the end, scatter-gather buffers follow page boundaries. */
- blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+ * transfer. We'll use the maxpacket value of the bulk-IN pipe
+ * to set the SCSI device queue's DMA alignment mask.
+ */
+ bulk_in_ep = us->pusb_dev->ep_in[usb_pipeendpoint(us->recv_bulk_pipe)];
+ blk_queue_update_dma_alignment(sdev->request_queue,
+ le16_to_cpu(bulk_in_ep->desc.wMaxPacketSize) - 1);
+ /* wMaxPacketSize must be a power of 2 */
/*
* The UFI spec treates the Peripheral Qualifier bits in an
@@ -132,7 +134,7 @@ static int slave_configure(struct scsi_device *sdev)
/* Disk-type devices use MODE SENSE(6) if the protocol
* (SubClass) is Transparent SCSI, otherwise they use
* MODE SENSE(10). */
- if (us->subclass != US_SC_SCSI)
+ if (us->subclass != US_SC_SCSI && us->subclass != US_SC_CYP_ATACB)
sdev->use_10_for_ms = 1;
/* Many disks only accept MODE SENSE transfer lengths of
@@ -226,12 +228,12 @@ static int queuecommand(struct scsi_cmnd *srb,
{
struct us_data *us = host_to_us(srb->device->host);
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
/* check for state-transition errors */
if (us->srb != NULL) {
printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
- __FUNCTION__, us->srb);
+ __func__, us->srb);
return SCSI_MLQUEUE_HOST_BUSY;
}
@@ -260,7 +262,7 @@ static int command_abort(struct scsi_cmnd *srb)
{
struct us_data *us = host_to_us(srb->device->host);
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
/* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
* bits are protected by the host lock. */
@@ -297,7 +299,7 @@ static int device_reset(struct scsi_cmnd *srb)
struct us_data *us = host_to_us(srb->device->host);
int result;
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
/* lock the device pointers and do the reset */
mutex_lock(&(us->dev_mutex));
@@ -313,7 +315,7 @@ static int bus_reset(struct scsi_cmnd *srb)
struct us_data *us = host_to_us(srb->device->host);
int result;
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
result = usb_stor_port_reset(us);
return result < 0 ? FAILED : SUCCESS;
}