diff options
Diffstat (limited to 'drivers/usb/wusbcore')
| -rw-r--r-- | drivers/usb/wusbcore/dev-sysfs.c | 143 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/pal.c | 39 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/reservation.c | 115 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/rh.c | 477 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/wusbhc.c | 416 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/wusbhc.h | 495 |
6 files changed, 1685 insertions, 0 deletions
diff --git a/drivers/usb/wusbcore/dev-sysfs.c b/drivers/usb/wusbcore/dev-sysfs.c new file mode 100644 index 00000000000..7897a19652e --- /dev/null +++ b/drivers/usb/wusbcore/dev-sysfs.c @@ -0,0 +1,143 @@ +/* + * WUSB devices + * sysfs bindings + * + * Copyright (C) 2007 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Get them out of the way... + */ + +#include <linux/jiffies.h> +#include <linux/ctype.h> +#include <linux/workqueue.h> +#include "wusbhc.h" + +#undef D_LOCAL +#define D_LOCAL 4 +#include <linux/uwb/debug.h> + +static ssize_t wusb_disconnect_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct usb_device *usb_dev; + struct wusbhc *wusbhc; + unsigned command; + u8 port_idx; + + if (sscanf(buf, "%u", &command) != 1) + return -EINVAL; + if (command == 0) + return size; + usb_dev = to_usb_device(dev); + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + return -ENODEV; + + mutex_lock(&wusbhc->mutex); + port_idx = wusb_port_no_to_idx(usb_dev->portnum); + __wusbhc_dev_disable(wusbhc, port_idx); + mutex_unlock(&wusbhc->mutex); + wusbhc_put(wusbhc); + return size; +} +static DEVICE_ATTR(wusb_disconnect, 0200, NULL, wusb_disconnect_store); + +static ssize_t wusb_cdid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + ssize_t result; + struct wusb_dev *wusb_dev; + + wusb_dev = wusb_dev_get_by_usb_dev(to_usb_device(dev)); + if (wusb_dev == NULL) + return -ENODEV; + result = ckhdid_printf(buf, PAGE_SIZE, &wusb_dev->cdid); + strcat(buf, "\n"); + wusb_dev_put(wusb_dev); + return result + 1; +} +static DEVICE_ATTR(wusb_cdid, 0444, wusb_cdid_show, NULL); + +static ssize_t wusb_ck_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int result; + struct usb_device *usb_dev; + struct wusbhc *wusbhc; + struct wusb_ckhdid ck; + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx\n", + &ck.data[0] , &ck.data[1], + &ck.data[2] , &ck.data[3], + &ck.data[4] , &ck.data[5], + &ck.data[6] , &ck.data[7], + &ck.data[8] , &ck.data[9], + &ck.data[10], &ck.data[11], + &ck.data[12], &ck.data[13], + &ck.data[14], &ck.data[15]); + if (result != 16) + return -EINVAL; + + usb_dev = to_usb_device(dev); + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + return -ENODEV; + result = wusb_dev_4way_handshake(wusbhc, usb_dev->wusb_dev, &ck); + memset(&ck, 0, sizeof(ck)); + wusbhc_put(wusbhc); + return result < 0 ? result : size; +} +static DEVICE_ATTR(wusb_ck, 0200, NULL, wusb_ck_store); + +static struct attribute *wusb_dev_attrs[] = { + &dev_attr_wusb_disconnect.attr, + &dev_attr_wusb_cdid.attr, + &dev_attr_wusb_ck.attr, + NULL, +}; + +static struct attribute_group wusb_dev_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wusb_dev_attrs, +}; + +int wusb_dev_sysfs_add(struct wusbhc *wusbhc, struct usb_device *usb_dev, + struct wusb_dev *wusb_dev) +{ + int result = sysfs_create_group(&usb_dev->dev.kobj, + &wusb_dev_attr_group); + struct device *dev = &usb_dev->dev; + if (result < 0) + dev_err(dev, "Cannot register WUSB-dev attributes: %d\n", + result); + return result; +} + +void wusb_dev_sysfs_rm(struct wusb_dev *wusb_dev) +{ + struct usb_device *usb_dev = wusb_dev->usb_dev; + if (usb_dev) + sysfs_remove_group(&usb_dev->dev.kobj, &wusb_dev_attr_group); +} diff --git a/drivers/usb/wusbcore/pal.c b/drivers/usb/wusbcore/pal.c new file mode 100644 index 00000000000..cc126b44473 --- /dev/null +++ b/drivers/usb/wusbcore/pal.c @@ -0,0 +1,39 @@ +/* + * Wireless USB Host Controller + * UWB Protocol Adaptation Layer (PAL) glue. + * + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "wusbhc.h" + +/** + * wusbhc_pal_register - register the WUSB HC as a UWB PAL + * @wusbhc: the WUSB HC + */ +int wusbhc_pal_register(struct wusbhc *wusbhc) +{ + uwb_pal_init(&wusbhc->pal); + + return uwb_pal_register(wusbhc->uwb_rc, &wusbhc->pal); +} + +/** + * wusbhc_pal_register - unregister the WUSB HC as a UWB PAL + * @wusbhc: the WUSB HC + */ +void wusbhc_pal_unregister(struct wusbhc *wusbhc) +{ + uwb_pal_unregister(wusbhc->uwb_rc, &wusbhc->pal); +} diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c new file mode 100644 index 00000000000..fc63e77ded2 --- /dev/null +++ b/drivers/usb/wusbcore/reservation.c @@ -0,0 +1,115 @@ +/* + * WUSB cluster reservation management + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/uwb.h> + +#include "wusbhc.h" + +/* + * WUSB cluster reservations are multicast reservations with the + * broadcast cluster ID (BCID) as the target DevAddr. + * + * FIXME: consider adjusting the reservation depending on what devices + * are attached. + */ + +static int wusbhc_bwa_set(struct wusbhc *wusbhc, u8 stream, + const struct uwb_mas_bm *mas) +{ + if (mas == NULL) + mas = &uwb_mas_bm_zero; + return wusbhc->bwa_set(wusbhc, stream, mas); +} + +/** + * wusbhc_rsv_complete_cb - WUSB HC reservation complete callback + * @rsv: the reservation + * + * Either set or clear the HC's view of the reservation. + * + * FIXME: when a reservation is denied the HC should be stopped. + */ +static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv) +{ + struct wusbhc *wusbhc = rsv->pal_priv; + struct device *dev = wusbhc->dev; + char buf[72]; + + switch (rsv->state) { + case UWB_RSV_STATE_O_ESTABLISHED: + bitmap_scnprintf(buf, sizeof(buf), rsv->mas.bm, UWB_NUM_MAS); + dev_dbg(dev, "established reservation: %s\n", buf); + wusbhc_bwa_set(wusbhc, rsv->stream, &rsv->mas); + break; + case UWB_RSV_STATE_NONE: + dev_dbg(dev, "removed reservation\n"); + wusbhc_bwa_set(wusbhc, 0, NULL); + wusbhc->rsv = NULL; + break; + default: + dev_dbg(dev, "unexpected reservation state: %d\n", rsv->state); + break; + } +} + + +/** + * wusbhc_rsv_establish - establish a reservation for the cluster + * @wusbhc: the WUSB HC requesting a bandwith reservation + */ +int wusbhc_rsv_establish(struct wusbhc *wusbhc) +{ + struct uwb_rc *rc = wusbhc->uwb_rc; + struct uwb_rsv *rsv; + struct uwb_dev_addr bcid; + int ret; + + rsv = uwb_rsv_create(rc, wusbhc_rsv_complete_cb, wusbhc); + if (rsv == NULL) + return -ENOMEM; + + bcid.data[0] = wusbhc->cluster_id; + bcid.data[1] = 0; + + rsv->owner = &rc->uwb_dev; + rsv->target.type = UWB_RSV_TARGET_DEVADDR; + rsv->target.devaddr = bcid; + rsv->type = UWB_DRP_TYPE_PRIVATE; + rsv->max_mas = 256; + rsv->min_mas = 16; /* one MAS per zone? */ + rsv->sparsity = 16; /* at least one MAS in each zone? */ + rsv->is_multicast = true; + + ret = uwb_rsv_establish(rsv); + if (ret == 0) + wusbhc->rsv = rsv; + else + uwb_rsv_destroy(rsv); + return ret; +} + + +/** + * wusbhc_rsv_terminate - terminate any cluster reservation + * @wusbhc: the WUSB host whose reservation is to be terminated + */ +void wusbhc_rsv_terminate(struct wusbhc *wusbhc) +{ + if (wusbhc->rsv) + uwb_rsv_terminate(wusbhc->rsv); +} diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c new file mode 100644 index 00000000000..267a6432510 --- /dev/null +++ b/drivers/usb/wusbcore/rh.c @@ -0,0 +1,477 @@ +/* + * Wireless USB Host Controller + * Root Hub operations + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We fake a root hub that has fake ports (as many as simultaneous + * devices the Wireless USB Host Controller can deal with). For each + * port we keep an state in @wusbhc->port[index] identical to the one + * specified in the USB2.0[ch11] spec and some extra device + * information that complements the one in 'struct usb_device' (as + * this lacs a hcpriv pointer). + * + * Note this is common to WHCI and HWA host controllers. + * + * Through here we enable most of the state changes that the USB stack + * will use to connect or disconnect devices. We need to do some + * forced adaptation of Wireless USB device states vs. wired: + * + * USB: WUSB: + * + * Port Powered-off port slot n/a + * Powered-on port slot available + * Disconnected port slot available + * Connected port slot assigned device + * device sent DN_Connect + * device was authenticated + * Enabled device is authenticated, transitioned + * from unauth -> auth -> default address + * -> enabled + * Reset disconnect + * Disable disconnect + * + * This maps the standard USB port states with the WUSB device states + * so we can fake ports without having to modify the USB stack. + * + * FIXME: this process will change in the future + * + * + * ENTRY POINTS + * + * Our entry points into here are, as in hcd.c, the USB stack root hub + * ops defined in the usb_hcd struct: + * + * wusbhc_rh_status_data() Provide hub and port status data bitmap + * + * wusbhc_rh_control() Execution of all the major requests + * you can do to a hub (Set|Clear + * features, get descriptors, status, etc). + * + * wusbhc_rh_[suspend|resume]() That + * + * wusbhc_rh_start_port_reset() ??? unimplemented + */ +#include "wusbhc.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/* + * Reset a fake port + * + * This can be called to reset a port from any other state or to reset + * it when connecting. In Wireless USB they are different; when doing + * a new connect that involves going over the authentication. When + * just reseting, its a different story. + * + * The Linux USB stack resets a port twice before it considers it + * enabled, so we have to detect and ignore that. + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Supposedly we are the only thread accesing @wusbhc->port; in any + * case, maybe we should move the mutex locking from + * wusbhc_devconnect_auth() to here. + * + * @port_idx refers to the wusbhc's port index, not the USB port number + */ +static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) +{ + int result = 0; + struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); + + d_fnstart(3, wusbhc->dev, "(wusbhc %p port_idx %u)\n", + wusbhc, port_idx); + if (port->reset_count == 0) { + wusbhc_devconnect_auth(wusbhc, port_idx); + port->reset_count++; + } else if (port->reset_count == 1) + /* see header */ + d_printf(2, wusbhc->dev, "Ignoring second reset on port_idx " + "%u\n", port_idx); + else + result = wusbhc_dev_reset(wusbhc, port_idx); + d_fnend(3, wusbhc->dev, "(wusbhc %p port_idx %u) = %d\n", + wusbhc, port_idx, result); + return result; +} + +/* + * Return the hub change status bitmap + * + * The bits in the change status bitmap are cleared when a + * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4]. + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * WARNING!! This gets called from atomic context; we cannot get the + * mutex--the only race condition we can find is some bit + * changing just after we copy it, which shouldn't be too + * big of a problem [and we can't make it an spinlock + * because other parts need to take it and sleep] . + * + * @usb_hcd is refcounted, so it won't dissapear under us + * and before killing a host, the polling of the root hub + * would be stopped anyway. + */ +int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + size_t cnt, size; + unsigned long *buf = (unsigned long *) _buf; + + d_fnstart(1, wusbhc->dev, "(wusbhc %p)\n", wusbhc); + /* WE DON'T LOCK, see comment */ + size = wusbhc->ports_max + 1 /* hub bit */; + size = (size + 8 - 1) / 8; /* round to bytes */ + for (cnt = 0; cnt < wusbhc->ports_max; cnt++) + if (wusb_port_by_idx(wusbhc, cnt)->change) + set_bit(cnt + 1, buf); + else + clear_bit(cnt + 1, buf); + d_fnend(1, wusbhc->dev, "(wusbhc %p) %u, buffer:\n", wusbhc, (int)size); + d_dump(1, wusbhc->dev, _buf, size); + return size; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_status_data); + +/* + * Return the hub's desciptor + * + * NOTE: almost cut and paste from ehci-hub.c + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked + */ +static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, + u16 wIndex, + struct usb_hub_descriptor *descr, + u16 wLength) +{ + u16 temp = 1 + (wusbhc->ports_max / 8); + u8 length = 7 + 2 * temp; + + if (wLength < length) + return -ENOSPC; + descr->bDescLength = 7 + 2 * temp; + descr->bDescriptorType = 0x29; /* HUB type */ + descr->bNbrPorts = wusbhc->ports_max; + descr->wHubCharacteristics = cpu_to_le16( + 0x00 /* All ports power at once */ + | 0x00 /* not part of compound device */ + | 0x10 /* No overcurrent protection */ + | 0x00 /* 8 FS think time FIXME ?? */ + | 0x00); /* No port indicators */ + descr->bPwrOn2PwrGood = 0; + descr->bHubContrCurrent = 0; + /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + memset(&descr->bitmap[0], 0, temp); + memset(&descr->bitmap[temp], 0xff, temp); + return 0; +} + +/* + * Clear a hub feature + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Nothing to do, so no locking needed ;) + */ +static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature) +{ + int result; + struct device *dev = wusbhc->dev; + + d_fnstart(4, dev, "(%p, feature 0x%04u)\n", wusbhc, feature); + switch (feature) { + case C_HUB_LOCAL_POWER: + /* FIXME: maybe plug bit 0 to the power input status, + * if any? + * see wusbhc_rh_get_hub_status() */ + case C_HUB_OVER_CURRENT: + result = 0; + break; + default: + result = -EPIPE; + } + d_fnend(4, dev, "(%p, feature 0x%04u), %d\n", wusbhc, feature, result); + return result; +} + +/* + * Return hub status (it is always zero...) + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Nothing to do, so no locking needed ;) + */ +static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf, + u16 wLength) +{ + /* FIXME: maybe plug bit 0 to the power input status (if any)? */ + *buf = 0; + return 0; +} + +/* + * Set a port feature + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature, + u8 selector, u8 port_idx) +{ + int result = -EINVAL; + struct device *dev = wusbhc->dev; + + d_fnstart(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d)\n", + feature, selector, port_idx); + + if (port_idx > wusbhc->ports_max) + goto error; + + switch (feature) { + /* According to USB2.0[11.24.2.13]p2, these features + * are not required to be implemented. */ + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + result = 0; + break; + + case USB_PORT_FEAT_POWER: + /* No such thing, but we fake it works */ + mutex_lock(&wusbhc->mutex); + wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER; + mutex_unlock(&wusbhc->mutex); + result = 0; + break; + case USB_PORT_FEAT_RESET: + result = wusbhc_rh_port_reset(wusbhc, port_idx); + break; + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_SUSPEND: + dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n", + port_idx, feature, selector); + result = -ENOSYS; + break; + default: + dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n", + port_idx, feature, selector); + result = -EPIPE; + break; + } +error: + d_fnend(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d) = %d\n", + feature, selector, port_idx, result); + return result; +} + +/* + * Clear a port feature... + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature, + u8 selector, u8 port_idx) +{ + int result = -EINVAL; + struct device *dev = wusbhc->dev; + + d_fnstart(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d)\n", + wusbhc, feature, selector, port_idx); + + if (port_idx > wusbhc->ports_max) + goto error; + + mutex_lock(&wusbhc->mutex); + result = 0; + switch (feature) { + case USB_PORT_FEAT_POWER: /* fake port always on */ + /* According to USB2.0[11.24.2.7.1.4], no need to implement? */ + case USB_PORT_FEAT_C_OVER_CURRENT: + break; + case USB_PORT_FEAT_C_RESET: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET; + break; + case USB_PORT_FEAT_C_CONNECTION: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION; + break; + case USB_PORT_FEAT_ENABLE: + __wusbhc_dev_disable(wusbhc, port_idx); + break; + case USB_PORT_FEAT_C_ENABLE: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE; + break; + case USB_PORT_FEAT_SUSPEND: + case USB_PORT_FEAT_C_SUSPEND: + case 0xffff: /* ??? FIXME */ + dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n", + port_idx, feature, selector); + /* dump_stack(); */ + result = -ENOSYS; + break; + default: + dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n", + port_idx, feature, selector); + result = -EPIPE; + break; + } + mutex_unlock(&wusbhc->mutex); +error: + d_fnend(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d) = " + "%d\n", wusbhc, feature, selector, port_idx, result); + return result; +} + +/* + * Return the port's status + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx, + u32 *_buf, u16 wLength) +{ + int result = -EINVAL; + u16 *buf = (u16 *) _buf; + + d_fnstart(1, wusbhc->dev, "(wusbhc %p port_idx %u wLength %u)\n", + wusbhc, port_idx, wLength); + if (port_idx > wusbhc->ports_max) + goto error; + mutex_lock(&wusbhc->mutex); + buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status); + buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change); + result = 0; + mutex_unlock(&wusbhc->mutex); +error: + d_fnend(1, wusbhc->dev, "(wusbhc %p) = %d, buffer:\n", wusbhc, result); + d_dump(1, wusbhc->dev, _buf, wLength); + return result; +} + +/* + * Entry point for Root Hub operations + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + int result = -ENOSYS; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + + switch (reqntype) { + case GetHubDescriptor: + result = wusbhc_rh_get_hub_descr( + wusbhc, wValue, wIndex, + (struct usb_hub_descriptor *) buf, wLength); + break; + case ClearHubFeature: + result = wusbhc_rh_clear_hub_feat(wusbhc, wValue); + break; + case GetHubStatus: + result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength); + break; + + case SetPortFeature: + result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8, + (wIndex & 0xff) - 1); + break; + case ClearPortFeature: + result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8, + (wIndex & 0xff) - 1); + break; + case GetPortStatus: + result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1, + (u32 *)buf, wLength); + break; + + case SetHubFeature: + default: + dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) " + "UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype, + wValue, wIndex, buf, wLength); + /* dump_stack(); */ + result = -ENOSYS; + } + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_control); + +int wusbhc_rh_suspend(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, wusbhc); + /* dump_stack(); */ + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_suspend); + +int wusbhc_rh_resume(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, wusbhc); + /* dump_stack(); */ + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_resume); + +int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n", + __func__, usb_hcd, wusbhc, port_idx); + WARN_ON(1); + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset); + +static void wusb_port_init(struct wusb_port *port) +{ + port->status |= USB_PORT_STAT_HIGH_SPEED; +} + +/* + * Alloc fake port specific fields and status. + */ +int wusbhc_rh_create(struct wusbhc *wusbhc) +{ + int result = -ENOMEM; + size_t port_size, itr; + port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]); + wusbhc->port = kzalloc(port_size, GFP_KERNEL); + if (wusbhc->port == NULL) + goto error_port_alloc; + for (itr = 0; itr < wusbhc->ports_max; itr++) + wusb_port_init(&wusbhc->port[itr]); + result = 0; +error_port_alloc: + return result; +} + +void wusbhc_rh_destroy(struct wusbhc *wusbhc) +{ + kfree(wusbhc->port); +} diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c new file mode 100644 index 00000000000..1149b1e59c8 --- /dev/null +++ b/drivers/usb/wusbcore/wusbhc.c @@ -0,0 +1,416 @@ +/* + * Wireless USB Host Controller + * sysfs glue, wusbcore module support and life cycle management + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Creation/destruction of wusbhc is split in two parts; that that + * doesn't require the HCD to be added (wusbhc_{create,destroy}) and + * the one that requires (phase B, wusbhc_b_{create,destroy}). + * + * This is so because usb_add_hcd() will start the HC, and thus, all + * the HC specific stuff has to be already initialiazed (like sysfs + * thingies). + */ +#include <linux/device.h> +#include <linux/module.h> +#include "wusbhc.h" + +/** + * Extract the wusbhc that corresponds to a USB Host Controller class device + * + * WARNING! Apply only if @dev is that of a + * wusbhc.usb_hcd.self->class_dev; otherwise, you loose. + */ +static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev) +{ + struct usb_bus *usb_bus = dev_get_drvdata(dev); + struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus); + return usb_hcd_to_wusbhc(usb_hcd); +} + +/* + * Show & store the current WUSB trust timeout + * + * We don't do locking--it is an 'atomic' value. + * + * The units that we store/show are always MILLISECONDS. However, the + * value of trust_timeout is jiffies. + */ +static ssize_t wusb_trust_timeout_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + + return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout); +} + +static ssize_t wusb_trust_timeout_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + ssize_t result = -ENOSYS; + unsigned trust_timeout; + + result = sscanf(buf, "%u", &trust_timeout); + if (result != 1) { + result = -EINVAL; + goto out; + } + /* FIXME: maybe we should check for range validity? */ + wusbhc->trust_timeout = trust_timeout; + cancel_delayed_work(&wusbhc->keep_alive_timer); + flush_workqueue(wusbd); + queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, + (trust_timeout * CONFIG_HZ)/1000/2); +out: + return result < 0 ? result : size; +} +static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show, + wusb_trust_timeout_store); + +/* + * Show & store the current WUSB CHID + */ +static ssize_t wusb_chid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + ssize_t result = 0; + + if (wusbhc->wuie_host_info != NULL) + result += ckhdid_printf(buf, PAGE_SIZE, + &wusbhc->wuie_host_info->CHID); + return result; +} + +/* + * Store a new CHID + * + * This will (FIXME) trigger many changes. + * + * - Send an all zeros CHID and it will stop the controller + * - Send a non-zero CHID and it will start it + * (unless it was started, it will just change the CHID, + * diconnecting all devices first). + * + * So first we scan the MMC we are sent and then we act on it. We + * read it in the same format as we print it, an ASCII string of 16 + * hex bytes. + * + * See wusbhc_chid_set() for more info. + */ +static ssize_t wusb_chid_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + struct wusb_ckhdid chid; + ssize_t result; + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx\n", + &chid.data[0] , &chid.data[1] , + &chid.data[2] , &chid.data[3] , + &chid.data[4] , &chid.data[5] , + &chid.data[6] , &chid.data[7] , + &chid.data[8] , &chid.data[9] , + &chid.data[10], &chid.data[11], + &chid.data[12], &chid.data[13], + &chid.data[14], &chid.data[15]); + if (result != 16) { + dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): " + "%d\n", (int)result); + return -EINVAL; + } + result = wusbhc_chid_set(wusbhc, &chid); + return result < 0 ? result : size; +} +static DEVICE_ATTR(wusb_chid, 0644, wusb_chid_show, wusb_chid_store); + +/* Group all the WUSBHC attributes */ +static struct attribute *wusbhc_attrs[] = { + &dev_attr_wusb_trust_timeout.attr, + &dev_attr_wusb_chid.attr, + NULL, +}; + +static struct attribute_group wusbhc_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wusbhc_attrs, +}; + +/* + * Create a wusbhc instance + * + * NOTEs: + * + * - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been + * initialized but not added. + * + * - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling. + * + * - fill out wusbhc->uwb_rc and refcount it before calling + * - fill out the wusbhc->sec_modes array + */ +int wusbhc_create(struct wusbhc *wusbhc) +{ + int result = 0; + + wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS; + mutex_init(&wusbhc->mutex); + result = wusbhc_mmcie_create(wusbhc); + if (result < 0) + goto error_mmcie_create; + result = wusbhc_devconnect_create(wusbhc); + if (result < 0) + goto error_devconnect_create; + result = wusbhc_rh_create(wusbhc); + if (result < 0) + goto error_rh_create; + result = wusbhc_sec_create(wusbhc); + if (result < 0) + goto error_sec_create; + result = wusbhc_pal_register(wusbhc); + if (result < 0) + goto error_pal_register; + return 0; + +error_pal_register: + wusbhc_sec_destroy(wusbhc); +error_sec_create: + wusbhc_rh_destroy(wusbhc); +error_rh_create: + wusbhc_devconnect_destroy(wusbhc); +error_devconnect_create: + wusbhc_mmcie_destroy(wusbhc); +error_mmcie_create: + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_create); + +static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc) +{ + return &wusbhc->usb_hcd.self.controller->kobj; +} + +/* + * Phase B of a wusbhc instance creation + * + * Creates fields that depend on wusbhc->usb_hcd having been + * added. This is where we create the sysfs files in + * /sys/class/usb_host/usb_hostX/. + * + * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper + * layer (hwahc or whci) + */ +int wusbhc_b_create(struct wusbhc *wusbhc) +{ + int result = 0; + struct device *dev = wusbhc->usb_hcd.self.controller; + + result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); + if (result < 0) { + dev_err(dev, "Cannot register WUSBHC attributes: %d\n", result); + goto error_create_attr_group; + } + /* Yep, I plan to add stuff here... */ +error_create_attr_group: + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_b_create); + +void wusbhc_b_destroy(struct wusbhc *wusbhc) +{ + sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); +} +EXPORT_SYMBOL_GPL(wusbhc_b_destroy); + +void wusbhc_destroy(struct wusbhc *wusbhc) +{ + wusbhc_pal_unregister(wusbhc); + wusbhc_sec_destroy(wusbhc); + wusbhc_rh_destroy(wusbhc); + wusbhc_devconnect_destroy(wusbhc); + wusbhc_mmcie_destroy(wusbhc); +} +EXPORT_SYMBOL_GPL(wusbhc_destroy); + +struct workqueue_struct *wusbd; +EXPORT_SYMBOL_GPL(wusbd); + +/* + * WUSB Cluster ID allocation map + * + * Each WUSB bus in a channel is identified with a Cluster Id in the + * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff + * (that's space for 31 WUSB controllers, as 0xff can't be taken). We + * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff). + * + * For each one we taken, we pin it in the bitap + */ +#define CLUSTER_IDS 32 +static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS); +static DEFINE_SPINLOCK(wusb_cluster_ids_lock); + +/* + * Get a WUSB Cluster ID + * + * Need to release with wusb_cluster_id_put() when done w/ it. + */ +/* FIXME: coordinate with the choose_addres() from the USB stack */ +/* we want to leave the top of the 128 range for cluster addresses and + * the bottom for device addresses (as we map them one on one with + * ports). */ +u8 wusb_cluster_id_get(void) +{ + u8 id; + spin_lock(&wusb_cluster_ids_lock); + id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS); + if (id > CLUSTER_IDS) { + id = 0; + goto out; + } + set_bit(id, wusb_cluster_id_table); + id = (u8) 0xff - id; +out: + spin_unlock(&wusb_cluster_ids_lock); + return id; + +} +EXPORT_SYMBOL_GPL(wusb_cluster_id_get); + +/* + * Release a WUSB Cluster ID + * + * Obtained it with wusb_cluster_id_get() + */ +void wusb_cluster_id_put(u8 id) +{ + id = 0xff - id; + BUG_ON(id >= CLUSTER_IDS); + spin_lock(&wusb_cluster_ids_lock); + WARN_ON(!test_bit(id, wusb_cluster_id_table)); + clear_bit(id, wusb_cluster_id_table); + spin_unlock(&wusb_cluster_ids_lock); +} +EXPORT_SYMBOL_GPL(wusb_cluster_id_put); + +/** + * wusbhc_giveback_urb - return an URB to the USB core + * @wusbhc: the host controller the URB is from. + * @urb: the URB. + * @status: the URB's status. + * + * Return an URB to the USB core doing some additional WUSB specific + * processing. + * + * - After a successful transfer, update the trust timeout timestamp + * for the WUSB device. + * + * - [WUSB] sections 4.13 and 7.5.1 specifies the stop retrasmittion + * condition for the WCONNECTACK_IE is that the host has observed + * the associated device responding to a control transfer. + */ +void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) +{ + struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); + + if (status == 0) { + wusb_dev->entry_ts = jiffies; + + /* wusbhc_devconnect_acked() can't be called from from + atomic context so defer it to a work queue. */ + if (!list_empty(&wusb_dev->cack_node)) + queue_work(wusbd, &wusb_dev->devconnect_acked_work); + } + + usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); +} +EXPORT_SYMBOL_GPL(wusbhc_giveback_urb); + +/** + * wusbhc_reset_all - reset the HC hardware + * @wusbhc: the host controller to reset. + * + * Request a full hardware reset of the chip. This will also reset + * the radio controller and any other PALs. + */ +void wusbhc_reset_all(struct wusbhc *wusbhc) +{ + uwb_rc_reset_all(wusbhc->uwb_rc); +} +EXPORT_SYMBOL_GPL(wusbhc_reset_all); + +static struct notifier_block wusb_usb_notifier = { + .notifier_call = wusb_usb_ncb, + .priority = INT_MAX /* Need to be called first of all */ +}; + +static int __init wusbcore_init(void) +{ + int result; + result = wusb_crypto_init(); + if (result < 0) + goto error_crypto_init; + /* WQ is singlethread because we need to serialize notifications */ + wusbd = create_singlethread_workqueue("wusbd"); + if (wusbd == NULL) { + result = -ENOMEM; + printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n"); + goto error_wusbd_create; + } + usb_register_notify(&wusb_usb_notifier); + bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS); + set_bit(0, wusb_cluster_id_table); /* reserve Cluster ID 0xff */ + return 0; + +error_wusbd_create: + wusb_crypto_exit(); +error_crypto_init: + return result; + +} +module_init(wusbcore_init); + +static void __exit wusbcore_exit(void) +{ + clear_bit(0, wusb_cluster_id_table); + if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) { + char buf[256]; + bitmap_scnprintf(buf, sizeof(buf), wusb_cluster_id_table, + CLUSTER_IDS); + printk(KERN_ERR "BUG: WUSB Cluster IDs not released " + "on exit: %s\n", buf); + WARN_ON(1); + } + usb_unregister_notify(&wusb_usb_notifier); + destroy_workqueue(wusbd); + wusb_crypto_exit(); +} +module_exit(wusbcore_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Wireless USB core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h new file mode 100644 index 00000000000..d0c132434f1 --- /dev/null +++ b/drivers/usb/wusbcore/wusbhc.h @@ -0,0 +1,495 @@ +/* + * Wireless USB Host Controller + * Common infrastructure for WHCI and HWA WUSB-HC drivers + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver implements parts common to all Wireless USB Host + * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used + * by: + * + * - hwahc: HWA, USB-dongle that implements a Wireless USB host + * controller, (Wireless USB 1.0 Host-Wire-Adapter specification). + * + * - whci: WHCI, a PCI card with a wireless host controller + * (Wireless Host Controller Interface 1.0 specification). + * + * Check out the Design-overview.txt file in the source documentation + * for other details on the implementation. + * + * Main blocks: + * + * rh Root Hub emulation (part of the HCD glue) + * + * devconnect Handle all the issues related to device connection, + * authentication, disconnection, timeout, reseting, + * keepalives, etc. + * + * mmc MMC IE broadcasting handling + * + * A host controller driver just initializes its stuff and as part of + * that, creates a 'struct wusbhc' instance that handles all the + * common WUSB mechanisms. Links in the function ops that are specific + * to it and then registers the host controller. Ready to run. + */ + +#ifndef __WUSBHC_H__ +#define __WUSBHC_H__ + +#include <linux/usb.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/kref.h> +#include <linux/workqueue.h> +/* FIXME: Yes, I know: BAD--it's not my fault the USB HC iface is not + * public */ +#include <linux/../../drivers/usb/core/hcd.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> + + +/** + * Wireless USB device + * + * Describe a WUSB device connected to the cluster. This struct + * belongs to the 'struct wusb_port' it is attached to and it is + * responsible for putting and clearing the pointer to it. + * + * Note this "complements" the 'struct usb_device' that the usb_hcd + * keeps for each connected USB device. However, it extends some + * information that is not available (there is no hcpriv ptr in it!) + * *and* most importantly, it's life cycle is different. It is created + * as soon as we get a DN_Connect (connect request notification) from + * the device through the WUSB host controller; the USB stack doesn't + * create the device until we authenticate it. FIXME: this will + * change. + * + * @bos: This is allocated when the BOS descriptors are read from + * the device and freed upon the wusb_dev struct dying. + * @wusb_cap_descr: points into @bos, and has been verified to be size + * safe. + */ +struct wusb_dev { + struct kref refcnt; + struct wusbhc *wusbhc; + struct list_head cack_node; /* Connect-Ack list */ + u8 port_idx; + u8 addr; + u8 beacon_type:4; + struct usb_encryption_descriptor ccm1_etd; + struct wusb_ckhdid cdid; + unsigned long entry_ts; + struct usb_bos_descriptor *bos; + struct usb_wireless_cap_descriptor *wusb_cap_descr; + struct uwb_mas_bm availability; + struct work_struct devconnect_acked_work; + struct urb *set_gtk_urb; + struct usb_ctrlrequest *set_gtk_req; + struct usb_device *usb_dev; +}; + +#define WUSB_DEV_ADDR_UNAUTH 0x80 + +static inline void wusb_dev_init(struct wusb_dev *wusb_dev) +{ + kref_init(&wusb_dev->refcnt); + /* no need to init the cack_node */ +} + +extern void wusb_dev_destroy(struct kref *_wusb_dev); + +static inline struct wusb_dev *wusb_dev_get(struct wusb_dev *wusb_dev) +{ + kref_get(&wusb_dev->refcnt); + return wusb_dev; +} + +static inline void wusb_dev_put(struct wusb_dev *wusb_dev) +{ + kref_put(&wusb_dev->refcnt, wusb_dev_destroy); +} + +/** + * Wireless USB Host Controlller root hub "fake" ports + * (state and device information) + * + * Wireless USB is wireless, so there are no ports; but we + * fake'em. Each RC can connect a max of devices at the same time + * (given in the Wireless Adapter descriptor, bNumPorts or WHCI's + * caps), referred to in wusbhc->ports_max. + * + * See rh.c for more information. + * + * The @status and @change use the same bits as in USB2.0[11.24.2.7], + * so we don't have to do much when getting the port's status. + * + * WUSB1.0[7.1], USB2.0[11.24.2.7.1,fig 11-10], + * include/linux/usb_ch9.h (#define USB_PORT_STAT_*) + */ +struct wusb_port { + u16 status; + u16 change; + struct wusb_dev *wusb_dev; /* connected device's info */ + unsigned reset_count; + u32 ptk_tkid; +}; + +/** + * WUSB Host Controller specifics + * + * All fields that are common to all Wireless USB controller types + * (HWA and WHCI) are grouped here. Host Controller + * functions/operations that only deal with general Wireless USB HC + * issues use this data type to refer to the host. + * + * @usb_hcd Instantiation of a USB host controller + * (initialized by upper layer [HWA=HC or WHCI]. + * + * @dev Device that implements this; initialized by the + * upper layer (HWA-HC, WHCI...); this device should + * have a refcount. + * + * @trust_timeout After this time without hearing for device + * activity, we consider the device gone and we have to + * re-authenticate. + * + * Can be accessed w/o locking--however, read to a + * local variable then use. + * + * @chid WUSB Cluster Host ID: this is supposed to be a + * unique value that doesn't change across reboots (so + * that your devices do not require re-association). + * + * Read/Write protected by @mutex + * + * @dev_info This array has ports_max elements. It is used to + * give the HC information about the WUSB devices (see + * 'struct wusb_dev_info'). + * + * For HWA we need to allocate it in heap; for WHCI it + * needs to be permanently mapped, so we keep it for + * both and make it easy. Call wusbhc->dev_info_set() + * to update an entry. + * + * @ports_max Number of simultaneous device connections (fake + * ports) this HC will take. Read-only. + * + * @port Array of port status for each fake root port. Guaranteed to + * always be the same lenght during device existence + * [this allows for some unlocked but referenced reading]. + * + * @mmcies_max Max number of Information Elements this HC can send + * in its MMC. Read-only. + * + * @mmcie_add HC specific operation (WHCI or HWA) for adding an + * MMCIE. + * + * @mmcie_rm HC specific operation (WHCI or HWA) for removing an + * MMCIE. + * + * @enc_types Array which describes the encryptions methods + * supported by the host as described in WUSB1.0 -- + * one entry per supported method. As of WUSB1.0 there + * is only four methods, we make space for eight just in + * case they decide to add some more (and pray they do + * it in sequential order). if 'enc_types[enc_method] + * != 0', then it is supported by the host. enc_method + * is USB_ENC_TYPE*. + * + * @set_ptk: Set the PTK and enable encryption for a device. Or, if + * the supplied key is NULL, disable encryption for that + * device. + * + * @set_gtk: Set the GTK to be used for all future broadcast packets + * (i.e., MMCs). With some hardware, setting the GTK may start + * MMC transmission. + * + * NOTE: + * + * - If wusb_dev->usb_dev is not NULL, then usb_dev is valid + * (wusb_dev has a refcount on it). Likewise, if usb_dev->wusb_dev + * is not NULL, usb_dev->wusb_dev is valid (usb_dev keeps a + * refcount on it). + * + * Most of the times when you need to use it, it will be non-NULL, + * so there is no real need to check for it (wusb_dev will + * dissapear before usb_dev). + * + * - The following fields need to be filled out before calling + * wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}. + * + * - there is no wusbhc_init() method, we do everything in + * wusbhc_create(). + * + * - Creation is done in two phases, wusbhc_create() and + * wusbhc_create_b(); b are the parts that need to be called after + * calling usb_hcd_add(&wusbhc->usb_hcd). + */ +struct wusbhc { + struct usb_hcd usb_hcd; /* HAS TO BE 1st */ + struct device *dev; + struct uwb_rc *uwb_rc; + struct uwb_pal pal; + + unsigned trust_timeout; /* in jiffies */ + struct wuie_host_info *wuie_host_info; /* Includes CHID */ + + struct mutex mutex; /* locks everything else */ + u16 cluster_id; /* Wireless USB Cluster ID */ + struct wusb_port *port; /* Fake port status handling */ + struct wusb_dev_info *dev_info; /* for Set Device Info mgmt */ + u8 ports_max; + unsigned active:1; /* currently xmit'ing MMCs */ + struct wuie_keep_alive keep_alive_ie; /* protected by mutex */ + struct delayed_work keep_alive_timer; + struct list_head cack_list; /* Connect acknowledging */ + size_t cack_count; /* protected by 'mutex' */ + struct wuie_connect_ack cack_ie; + struct uwb_rsv *rsv; /* cluster bandwidth reservation */ + + struct mutex mmcie_mutex; /* MMC WUIE handling */ + struct wuie_hdr **mmcie; /* WUIE array */ + u8 mmcies_max; + /* FIXME: make wusbhc_ops? */ + int (*start)(struct wusbhc *wusbhc); + void (*stop)(struct wusbhc *wusbhc); + int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + u8 handle, struct wuie_hdr *wuie); + int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle); + int (*dev_info_set)(struct wusbhc *, struct wusb_dev *wusb_dev); + int (*bwa_set)(struct wusbhc *wusbhc, s8 stream_index, + const struct uwb_mas_bm *); + int (*set_ptk)(struct wusbhc *wusbhc, u8 port_idx, + u32 tkid, const void *key, size_t key_size); + int (*set_gtk)(struct wusbhc *wusbhc, + u32 tkid, const void *key, size_t key_size); + int (*set_num_dnts)(struct wusbhc *wusbhc, u8 interval, u8 slots); + + struct { + struct usb_key_descriptor descr; + u8 data[16]; /* GTK key data */ + } __attribute__((packed)) gtk; + u8 gtk_index; + u32 gtk_tkid; + struct work_struct gtk_rekey_done_work; + int pending_set_gtks; + + struct usb_encryption_descriptor *ccm1_etd; +}; + +#define usb_hcd_to_wusbhc(u) container_of((u), struct wusbhc, usb_hcd) + + +extern int wusbhc_create(struct wusbhc *); +extern int wusbhc_b_create(struct wusbhc *); +extern void wusbhc_b_destroy(struct wusbhc *); +extern void wusbhc_destroy(struct wusbhc *); +extern int wusb_dev_sysfs_add(struct wusbhc *, struct usb_device *, + struct wusb_dev *); +extern void wusb_dev_sysfs_rm(struct wusb_dev *); +extern int wusbhc_sec_create(struct wusbhc *); +extern int wusbhc_sec_start(struct wusbhc *); +extern void wusbhc_sec_stop(struct wusbhc *); +extern void wusbhc_sec_destroy(struct wusbhc *); +extern void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, + int status); +void wusbhc_reset_all(struct wusbhc *wusbhc); + +int wusbhc_pal_register(struct wusbhc *wusbhc); +void wusbhc_pal_unregister(struct wusbhc *wusbhc); + +/* + * Return @usb_dev's @usb_hcd (properly referenced) or NULL if gone + * + * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) + * + * This is a safe assumption as @usb_dev->bus is referenced all the + * time during the @usb_dev life cycle. + */ +static inline struct usb_hcd *usb_hcd_get_by_usb_dev(struct usb_device *usb_dev) +{ + struct usb_hcd *usb_hcd; + usb_hcd = container_of(usb_dev->bus, struct usb_hcd, self); + return usb_get_hcd(usb_hcd); +} + +/* + * Increment the reference count on a wusbhc. + * + * @wusbhc's life cycle is identical to that of the underlying usb_hcd. + */ +static inline struct wusbhc *wusbhc_get(struct wusbhc *wusbhc) +{ + return usb_get_hcd(&wusbhc->usb_hcd) ? wusbhc : NULL; +} + +/* + * Return the wusbhc associated to a @usb_dev + * + * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) + * + * @returns: wusbhc for @usb_dev; NULL if the @usb_dev is being torn down. + * WARNING: referenced at the usb_hcd level, unlocked + * + * FIXME: move offline + */ +static inline struct wusbhc *wusbhc_get_by_usb_dev(struct usb_device *usb_dev) +{ + struct wusbhc *wusbhc = NULL; + struct usb_hcd *usb_hcd; + if (usb_dev->devnum > 1 && !usb_dev->wusb) { + /* but root hubs */ + dev_err(&usb_dev->dev, "devnum %d wusb %d\n", usb_dev->devnum, + usb_dev->wusb); + BUG_ON(usb_dev->devnum > 1 && !usb_dev->wusb); + } + usb_hcd = usb_hcd_get_by_usb_dev(usb_dev); + if (usb_hcd == NULL) + return NULL; + BUG_ON(usb_hcd->wireless == 0); + return wusbhc = usb_hcd_to_wusbhc(usb_hcd); +} + + +static inline void wusbhc_put(struct wusbhc *wusbhc) +{ + usb_put_hcd(&wusbhc->usb_hcd); +} + +int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid); +void wusbhc_stop(struct wusbhc *wusbhc); +extern int wusbhc_chid_set(struct wusbhc *, const struct wusb_ckhdid *); + +/* Device connect handling */ +extern int wusbhc_devconnect_create(struct wusbhc *); +extern void wusbhc_devconnect_destroy(struct wusbhc *); +extern int wusbhc_devconnect_start(struct wusbhc *wusbhc, + const struct wusb_ckhdid *chid); +extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc); +extern int wusbhc_devconnect_auth(struct wusbhc *, u8); +extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr, + struct wusb_dn_hdr *dn_hdr, size_t size); +extern int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port); +extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port); +extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, + void *priv); +extern int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, + u8 addr); + +/* Wireless USB fake Root Hub methods */ +extern int wusbhc_rh_create(struct wusbhc *); +extern void wusbhc_rh_destroy(struct wusbhc *); + +extern int wusbhc_rh_status_data(struct usb_hcd *, char *); +extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16); +extern int wusbhc_rh_suspend(struct usb_hcd *); +extern int wusbhc_rh_resume(struct usb_hcd *); +extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned); + +/* MMC handling */ +extern int wusbhc_mmcie_create(struct wusbhc *); +extern void wusbhc_mmcie_destroy(struct wusbhc *); +extern int wusbhc_mmcie_set(struct wusbhc *, u8 interval, u8 repeat_cnt, + struct wuie_hdr *); +extern void wusbhc_mmcie_rm(struct wusbhc *, struct wuie_hdr *); + +/* Bandwidth reservation */ +int wusbhc_rsv_establish(struct wusbhc *wusbhc); +void wusbhc_rsv_terminate(struct wusbhc *wusbhc); + +/* + * I've always said + * I wanted a wedding in a church... + * + * but lately I've been thinking about + * the Botanical Gardens. + * + * We could do it by the tulips. + * It'll be beautiful + * + * --Security! + */ +extern int wusb_dev_sec_add(struct wusbhc *, struct usb_device *, + struct wusb_dev *); +extern void wusb_dev_sec_rm(struct wusb_dev *) ; +extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *, + struct wusb_ckhdid *ck); +void wusbhc_gtk_rekey(struct wusbhc *wusbhc); + + +/* WUSB Cluster ID handling */ +extern u8 wusb_cluster_id_get(void); +extern void wusb_cluster_id_put(u8); + +/* + * wusb_port_by_idx - return the port associated to a zero-based port index + * + * NOTE: valid without locking as long as wusbhc is referenced (as the + * number of ports doesn't change). The data pointed to has to + * be verified though :) + */ +static inline struct wusb_port *wusb_port_by_idx(struct wusbhc *wusbhc, + u8 port_idx) +{ + return &wusbhc->port[port_idx]; +} + +/* + * wusb_port_no_to_idx - Convert port number (per usb_dev->portnum) to + * a port_idx. + * + * USB stack USB ports are 1 based!! + * + * NOTE: only valid for WUSB devices!!! + */ +static inline u8 wusb_port_no_to_idx(u8 port_no) +{ + return port_no - 1; +} + +extern struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *, + struct usb_device *); + +/* + * Return a referenced wusb_dev given a @usb_dev + * + * Returns NULL if the usb_dev is being torn down. + * + * FIXME: move offline + */ +static inline +struct wusb_dev *wusb_dev_get_by_usb_dev(struct usb_device *usb_dev) +{ + struct wusbhc *wusbhc; + struct wusb_dev *wusb_dev; + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + return NULL; + mutex_lock(&wusbhc->mutex); + wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev); + mutex_unlock(&wusbhc->mutex); + wusbhc_put(wusbhc); + return wusb_dev; +} + +/* Misc */ + +extern struct workqueue_struct *wusbd; +#endif /* #ifndef __WUSBHC_H__ */ |