summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/musb/cppi_dma.c1
-rw-r--r--drivers/usb/musb/musb_host.c227
2 files changed, 105 insertions, 123 deletions
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 30e24891ed6..1976e9b4180 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -579,6 +579,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
* trigger the "send a ZLP?" confusion.
*/
rndis = (maxpacket & 0x3f) == 0
+ && length > maxpacket
&& length < 0xffff
&& (length % maxpacket) != 0;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 1dfaaa6acfa..db1b57415ec 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -97,8 +97,8 @@
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int nOut,
- u8 *buf, u32 len);
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len);
/*
* Clear TX fifo. Needed to avoid BABBLE errors.
@@ -192,9 +192,10 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
{
u16 frame;
u32 len;
- void *buf;
void __iomem *mbase = musb->mregs;
struct urb *urb = next_urb(qh);
+ void *buf = urb->transfer_buffer;
+ u32 offset = 0;
struct musb_hw_ep *hw_ep = qh->hw_ep;
unsigned pipe = urb->pipe;
u8 address = usb_pipedevice(pipe);
@@ -217,7 +218,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_ISOC:
qh->iso_idx = 0;
qh->frame = 0;
- buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+ offset = urb->iso_frame_desc[0].offset;
len = urb->iso_frame_desc[0].length;
break;
default: /* bulk, interrupt */
@@ -235,14 +236,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
default: s = "-intr"; break;
}; s; }),
- epnum, buf, len);
+ epnum, buf + offset, len);
/* Configure endpoint */
if (is_in || hw_ep->is_shared_fifo)
hw_ep->in_qh = qh;
else
hw_ep->out_qh = qh;
- musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+ musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
/* transmit may have more work: start it when it is time */
if (is_in)
@@ -253,7 +254,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_ISOC:
case USB_ENDPOINT_XFER_INT:
DBG(3, "check whether there's still time for periodic Tx\n");
- qh->iso_idx = 0;
frame = musb_readw(mbase, MUSB_FRAME);
/* FIXME this doesn't implement that scheduling policy ...
* or handle framecounter wrapping
@@ -634,14 +634,68 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
ep->rx_reinit = 0;
}
+static bool musb_tx_dma_program(struct dma_controller *dma,
+ struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+ struct urb *urb, u32 offset, u32 length)
+{
+ struct dma_channel *channel = hw_ep->tx_channel;
+ void __iomem *epio = hw_ep->regs;
+ u16 pkt_size = qh->maxpacket;
+ u16 csr;
+ u8 mode;
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+ if (length > channel->max_len)
+ length = channel->max_len;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (length > pkt_size) {
+ mode = 1;
+ csr |= MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAMODE
+ | MUSB_TXCSR_DMAENAB;
+ } else {
+ mode = 0;
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+ csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+ }
+ channel->desired_mode = mode;
+ musb_writew(epio, MUSB_TXCSR, csr);
+#else
+ if (!is_cppi_enabled() && !tusb_dma_omap())
+ return false;
+
+ channel->actual_len = 0;
+
+ /*
+ * TX uses "RNDIS" mode automatically but needs help
+ * to identify the zero-length-final-packet case.
+ */
+ mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+#endif
+
+ qh->segsize = length;
+
+ if (!dma->channel_program(channel, pkt_size, mode,
+ urb->transfer_dma + offset, length)) {
+ dma->channel_release(channel);
+ hw_ep->tx_channel = NULL;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+ musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+ return false;
+ }
+ return true;
+}
/*
* Program an HDRC endpoint as per the given URB
* Context: irqs blocked, controller lock held
*/
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int is_out,
- u8 *buf, u32 len)
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len)
{
struct dma_controller *dma_controller;
struct dma_channel *dma_channel;
@@ -768,82 +822,9 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
else
load_count = min((u32) packet_sz, len);
-#ifdef CONFIG_USB_INVENTRA_DMA
- if (dma_channel) {
- qh->segsize = min(len, dma_channel->max_len);
- if (qh->segsize <= packet_sz)
- dma_channel->desired_mode = 0;
- else
- dma_channel->desired_mode = 1;
-
- if (dma_channel->desired_mode == 0) {
- /* Against the programming guide */
- csr |= (MUSB_TXCSR_DMAENAB);
- } else
- csr |= (MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_DMAMODE);
- musb_writew(epio, MUSB_TXCSR, csr);
-
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- dma_channel->desired_mode,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- if (is_out)
- hw_ep->tx_channel = NULL;
- else
- hw_ep->rx_channel = NULL;
- dma_channel = NULL;
-
- /*
- * The programming guide says that we must
- * clear the DMAENAB bit before DMAMODE...
- */
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_AUTOSET);
- musb_writew(epio, MUSB_TXCSR, csr);
- csr &= ~MUSB_TXCSR_DMAMODE;
- musb_writew(epio, MUSB_TXCSR, csr);
- }
- }
-#endif
-
- /* candidate for DMA */
- if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
-
- /* Defer enabling DMA */
- dma_channel->actual_len = 0L;
- qh->segsize = len;
-
- /* TX uses "rndis" mode automatically, but needs help
- * to identify the zero-length-final-packet case.
- */
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- (urb->transfer_flags
- & URB_ZERO_PACKET)
- == URB_ZERO_PACKET,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- hw_ep->tx_channel = NULL;
- dma_channel = NULL;
-
- /* REVISIT there's an error path here that
- * needs handling: can't do dma, but
- * there's no pio buffer address...
- */
- }
- }
+ if (dma_channel && musb_tx_dma_program(dma_controller,
+ hw_ep, qh, urb, offset, len))
+ load_count = 0;
if (load_count) {
/* PIO to load FIFO */
@@ -903,7 +884,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
dma_channel, packet_sz,
!(urb->transfer_flags
& URB_SHORT_NOT_OK),
- urb->transfer_dma,
+ urb->transfer_dma + offset,
qh->segsize);
if (!dma_ok) {
dma_controller->channel_release(
@@ -1146,8 +1127,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
int pipe;
bool done = false;
u16 tx_csr;
- size_t wLength = 0;
- u8 *buf = NULL;
+ size_t length = 0;
+ size_t offset = 0;
struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
@@ -1165,7 +1146,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
/* with CPPI, DMA sometimes triggers "extra" irqs */
if (!urb) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
+ return;
}
pipe = urb->pipe;
@@ -1202,7 +1183,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS
| MUSB_TXCSR_TXPKTRDY);
- goto finish;
+ return;
}
if (status) {
@@ -1234,8 +1215,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
/* second cppi case */
if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
-
+ return;
}
if (is_dma_capable() && dma && !status) {
@@ -1299,25 +1279,25 @@ void musb_host_tx(struct musb *musb, u8 epnum)
}
}
- /* REVISIT this looks wrong... */
if (!status || dma || usb_pipeisoc(pipe)) {
if (dma)
- wLength = dma->actual_len;
+ length = dma->actual_len;
else
- wLength = qh->segsize;
- qh->offset += wLength;
+ length = qh->segsize;
+ qh->offset += length;
if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
d = urb->iso_frame_desc + qh->iso_idx;
- d->actual_length = qh->segsize;
+ d->actual_length = length;
+ d->status = status;
if (++qh->iso_idx >= urb->number_of_packets) {
done = true;
} else {
d++;
- buf = urb->transfer_buffer + d->offset;
- wLength = d->length;
+ offset = d->offset;
+ length = d->length;
}
} else if (dma) {
done = true;
@@ -1330,10 +1310,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
& URB_ZERO_PACKET))
done = true;
if (!done) {
- buf = urb->transfer_buffer
- + qh->offset;
- wLength = urb->transfer_buffer_length
- - qh->offset;
+ offset = qh->offset;
+ length = urb->transfer_buffer_length - offset;
}
}
}
@@ -1352,28 +1330,31 @@ void musb_host_tx(struct musb *musb, u8 epnum)
urb->status = status;
urb->actual_length = qh->offset;
musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+ return;
+ } else if (usb_pipeisoc(pipe) && dma) {
+ if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+ offset, length))
+ return;
+ } else if (tx_csr & MUSB_TXCSR_DMAENAB) {
+ DBG(1, "not complete, but DMA enabled?\n");
+ return;
+ }
- } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
- /* WARN_ON(!buf); */
-
- /* REVISIT: some docs say that when hw_ep->tx_double_buffered,
- * (and presumably, fifo is not half-full) we should write TWO
- * packets before updating TXCSR ... other docs disagree ...
- */
- /* PIO: start next packet in this URB */
- if (wLength > qh->maxpacket)
- wLength = qh->maxpacket;
- musb_write_fifo(hw_ep, wLength, buf);
- qh->segsize = wLength;
-
- musb_ep_select(mbase, epnum);
- musb_writew(epio, MUSB_TXCSR,
- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
- } else
- DBG(1, "not complete, but dma enabled?\n");
+ /*
+ * PIO: start next packet in this URB.
+ *
+ * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+ * (and presumably, FIFO is not half-full) we should write *two*
+ * packets before updating TXCSR; other docs disagree...
+ */
+ if (length > qh->maxpacket)
+ length = qh->maxpacket;
+ musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+ qh->segsize = length;
-finish:
- return;
+ musb_ep_select(mbase, epnum);
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 10:41:22 +0000