diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/musb/musb_gadget.c | 79 |
1 files changed, 34 insertions, 45 deletions
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8b3c4e2ed7b..74073f9a43f 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -4,6 +4,7 @@ * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation + * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -436,14 +437,6 @@ void musb_g_tx(struct musb *musb, u8 epnum) csr |= MUSB_TXCSR_P_WZC_BITS; csr &= ~MUSB_TXCSR_P_SENTSTALL; musb_writew(epio, MUSB_TXCSR, csr); - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - musb->dma_controller->channel_abort(dma); - } - - if (request) - musb_g_giveback(musb_ep, request, -EPIPE); - break; } @@ -582,15 +575,25 @@ void musb_g_tx(struct musb *musb, u8 epnum) */ static void rxstate(struct musb *musb, struct musb_request *req) { - u16 csr = 0; const u8 epnum = req->epnum; struct usb_request *request = &req->request; struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; void __iomem *epio = musb->endpoints[epnum].regs; unsigned fifo_count = 0; u16 len = musb_ep->packet_sz; + u16 csr = musb_readw(epio, MUSB_RXCSR); - csr = musb_readw(epio, MUSB_RXCSR); + /* We shouldn't get here while DMA is active, but we do... */ + if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) { + DBG(4, "DMA pending...\n"); + return; + } + + if (csr & MUSB_RXCSR_P_SENDSTALL) { + DBG(5, "%s stalling, RXCSR %04x\n", + musb_ep->end_point.name, csr); + return; + } if (is_cppi_enabled() && musb_ep->dma) { struct dma_controller *c = musb->dma_controller; @@ -761,19 +764,10 @@ void musb_g_rx(struct musb *musb, u8 epnum) csr, dma ? " (dma)" : "", request); if (csr & MUSB_RXCSR_P_SENTSTALL) { - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - (void) musb->dma_controller->channel_abort(dma); - request->actual += musb_ep->dma->actual_len; - } - csr |= MUSB_RXCSR_P_WZC_BITS; csr &= ~MUSB_RXCSR_P_SENTSTALL; musb_writew(epio, MUSB_RXCSR, csr); - - if (request) - musb_g_giveback(musb_ep, request, -EPIPE); - goto done; + return; } if (csr & MUSB_RXCSR_P_OVERRUN) { @@ -795,7 +789,7 @@ void musb_g_rx(struct musb *musb, u8 epnum) DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1, "%s busy, csr %04x\n", musb_ep->end_point.name, csr); - goto done; + return; } if (dma && (csr & MUSB_RXCSR_DMAENAB)) { @@ -826,22 +820,15 @@ void musb_g_rx(struct musb *musb, u8 epnum) if ((request->actual < request->length) && (musb_ep->dma->actual_len == musb_ep->packet_sz)) - goto done; + return; #endif musb_g_giveback(musb_ep, request, 0); request = next_request(musb_ep); if (!request) - goto done; - - /* don't start more i/o till the stall clears */ - musb_ep_select(mbase, epnum); - csr = musb_readw(epio, MUSB_RXCSR); - if (csr & MUSB_RXCSR_P_SENDSTALL) - goto done; + return; } - /* analyze request if the ep is hot */ if (request) rxstate(musb, to_musb_request(request)); @@ -849,8 +836,6 @@ void musb_g_rx(struct musb *musb, u8 epnum) DBG(3, "packet waiting for %s%s request\n", musb_ep->desc ? "" : "inactive ", musb_ep->end_point.name); - -done: return; } @@ -1244,7 +1229,7 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) void __iomem *mbase; unsigned long flags; u16 csr; - struct musb_request *request = NULL; + struct musb_request *request; int status = 0; if (!ep) @@ -1260,24 +1245,29 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) musb_ep_select(mbase, epnum); - /* cannot portably stall with non-empty FIFO */ request = to_musb_request(next_request(musb_ep)); - if (value && musb_ep->is_in) { - csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) { - DBG(3, "%s fifo busy, cannot halt\n", ep->name); - spin_unlock_irqrestore(&musb->lock, flags); - return -EAGAIN; + if (value) { + if (request) { + DBG(3, "request in progress, cannot halt %s\n", + ep->name); + status = -EAGAIN; + goto done; + } + /* Cannot portably stall with non-empty FIFO */ + if (musb_ep->is_in) { + csr = musb_readw(epio, MUSB_TXCSR); + if (csr & MUSB_TXCSR_FIFONOTEMPTY) { + DBG(3, "FIFO busy, cannot halt %s\n", ep->name); + status = -EAGAIN; + goto done; + } } - } /* set/clear the stall and toggle bits */ DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear"); if (musb_ep->is_in) { csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) - csr |= MUSB_TXCSR_FLUSHFIFO; csr |= MUSB_TXCSR_P_WZC_BITS | MUSB_TXCSR_CLRDATATOG; if (value) @@ -1300,14 +1290,13 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) musb_writew(epio, MUSB_RXCSR, csr); } -done: - /* maybe start the first request in the queue */ if (!musb_ep->busy && !value && request) { DBG(3, "restarting the request\n"); musb_ep_restart(musb, request); } +done: spin_unlock_irqrestore(&musb->lock, flags); return status; } |