diff options
Diffstat (limited to 'drivers/usb')
40 files changed, 492 insertions, 113 deletions
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index ea071a5b6ee..44447f54942 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -2301,7 +2301,7 @@ out: return ret; } -static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot); +static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot); static ssize_t read_human_status(struct device *dev, struct device_attribute *attr, char *buf) @@ -2364,8 +2364,7 @@ out: return ret; } -static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO, - read_human_status, NULL); +static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL); static ssize_t read_delin(struct device *dev, struct device_attribute *attr, char *buf) @@ -2397,7 +2396,7 @@ out: return ret; } -static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL); +static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL); #define UEA_ATTR(name, reset) \ \ diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 05bf5a27b5b..989e16e4ab5 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -951,7 +951,9 @@ static int usbatm_atm_init(struct usbatm_data *instance) * condition: callbacks we register can be executed at once, before we have * initialized the struct atm_dev. To protect against this, all callbacks * abort if atm_dev->dev_data is NULL. */ - atm_dev = atm_dev_register(instance->driver_name, &usbatm_atm_devops, -1, NULL); + atm_dev = atm_dev_register(instance->driver_name, + &instance->usb_intf->dev, &usbatm_atm_devops, + -1, NULL); if (!atm_dev) { usb_err(instance, "%s: failed to register ATM device!\n", __func__); return -1; @@ -966,14 +968,6 @@ static int usbatm_atm_init(struct usbatm_data *instance) /* temp init ATM device, set to 128kbit */ atm_dev->link_rate = 128 * 1000 / 424; - ret = sysfs_create_link(&atm_dev->class_dev.kobj, - &instance->usb_intf->dev.kobj, "device"); - if (ret) { - atm_err(instance, "%s: sysfs_create_link failed: %d\n", - __func__, ret); - goto fail_sysfs; - } - if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) { atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret); goto fail; @@ -992,8 +986,6 @@ static int usbatm_atm_init(struct usbatm_data *instance) return 0; fail: - sysfs_remove_link(&atm_dev->class_dev.kobj, "device"); - fail_sysfs: instance->atm_dev = NULL; atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */ return ret; @@ -1329,7 +1321,6 @@ void usbatm_usb_disconnect(struct usb_interface *intf) /* ATM finalize */ if (instance->atm_dev) { - sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device"); atm_dev_deregister(instance->atm_dev); instance->atm_dev = NULL; } diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index ddb4dc98092..a3d2e239965 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -54,7 +54,6 @@ #include <linux/gfp.h> #include <linux/poll.h> #include <linux/usb.h> -#include <linux/smp_lock.h> #include <linux/usbdevice_fs.h> #include <linux/usb/hcd.h> #include <linux/mutex.h> diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 045bb4b823e..a7131ad630f 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -37,7 +37,6 @@ #include <linux/fs.h> #include <linux/mm.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/signal.h> #include <linux/poll.h> #include <linux/module.h> diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index 9fe34fb78ef..cf6a5423de0 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -19,7 +19,6 @@ #include <linux/errno.h> #include <linux/rwsem.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/usb.h> #include "usb.h" diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 61800f77dac..ced846ac414 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1330,6 +1330,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, */ if (usb_endpoint_xfer_control(&urb->ep->desc)) { + if (hcd->self.uses_pio_for_control) + return ret; if (hcd->self.uses_dma) { urb->setup_dma = dma_map_single( hcd->self.controller, diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 9819a4cc3b2..b690aa35df9 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -39,7 +39,6 @@ #include <linux/parser.h> #include <linux/notifier.h> #include <linux/seq_file.h> -#include <linux/smp_lock.h> #include <linux/usb/hcd.h> #include <asm/byteorder.h> #include "usb.h" diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index b5e20e873cb..717ff653fa2 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -2017,7 +2017,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) } } else { /* gpio_request fail so use -EINVAL for gpio_is_valid */ - ubc->vbus_pin = -EINVAL; + udc->vbus_pin = -EINVAL; } } diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 4a830df4fc3..484c5ba5450 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -30,7 +30,6 @@ #include <linux/blkdev.h> #include <linux/pagemap.h> #include <asm/unaligned.h> -#include <linux/smp_lock.h> #include <linux/usb/composite.h> #include <linux/usb/functionfs.h> diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 4f891eddd06..598e7e2ab80 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -25,7 +25,6 @@ #include <linux/cdev.h> #include <linux/mutex.h> #include <linux/poll.h> -#include <linux/smp_lock.h> #include <linux/uaccess.h> #include <linux/wait.h> #include <linux/usb/g_hid.h> diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 86afdc73322..6e2599661b5 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -1067,7 +1067,7 @@ static inline void create_debug_files (struct ehci_hcd *ehci) &debug_registers_fops)) goto file_error; - if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus, + if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus, &debug_lpm_fops)) goto file_error; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 502a7e6fef4..e9062806d4a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1063,10 +1063,11 @@ rescan: tmp && tmp != qh; tmp = tmp->qh_next.qh) continue; - /* periodic qh self-unlinks on empty */ - if (!tmp) - goto nogood; - unlink_async (ehci, qh); + /* periodic qh self-unlinks on empty, and a COMPLETING qh + * may already be unlinked. + */ + if (tmp) + unlink_async(ehci, qh); /* FALL THROUGH */ case QH_STATE_UNLINK: /* wait for hw to finish? */ case QH_STATE_UNLINK_WAIT: @@ -1083,7 +1084,6 @@ idle_timeout: } /* else FALL THROUGH */ default: -nogood: /* caller was supposed to have unlinked any requests; * that's not our job. just leak this memory. */ diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index d36e4e75e08..12f70c302b0 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -141,6 +141,10 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci) qh_put (ehci->async); ehci->async = NULL; + if (ehci->dummy) + qh_put(ehci->dummy); + ehci->dummy = NULL; + /* DMA consistent memory and pools */ if (ehci->qtd_pool) dma_pool_destroy (ehci->qtd_pool); @@ -227,8 +231,26 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) if (ehci->periodic == NULL) { goto fail; } - for (i = 0; i < ehci->periodic_size; i++) - ehci->periodic [i] = EHCI_LIST_END(ehci); + + if (ehci->use_dummy_qh) { + struct ehci_qh_hw *hw; + ehci->dummy = ehci_qh_alloc(ehci, flags); + if (!ehci->dummy) + goto fail; + + hw = ehci->dummy->hw; + hw->hw_next = EHCI_LIST_END(ehci); + hw->hw_qtd_next = EHCI_LIST_END(ehci); + hw->hw_alt_next = EHCI_LIST_END(ehci); + hw->hw_token &= ~QTD_STS_ACTIVE; + ehci->dummy->hw = hw; + + for (i = 0; i < ehci->periodic_size; i++) + ehci->periodic[i] = ehci->dummy->qh_dma; + } else { + for (i = 0; i < ehci->periodic_size; i++) + ehci->periodic[i] = EHCI_LIST_END(ehci); + } /* software shadow of hardware table */ ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index a1e8d273103..655f3c9f88b 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -103,6 +103,19 @@ static int ehci_pci_setup(struct usb_hcd *hcd) if (retval) return retval; + if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) || + (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) { + /* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may + * read/write memory space which does not belong to it when + * there is NULL pointer with T-bit set to 1 in the frame list + * table. To avoid the issue, the frame list link pointer + * should always contain a valid pointer to a inactive qh. + */ + ehci->use_dummy_qh = 1; + ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI " + "dummy qh workaround\n"); + } + /* data structure init */ retval = ehci_init(hcd); if (retval) @@ -148,6 +161,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd) if (pdev->revision < 0xa4) ehci->no_selective_suspend = 1; break; + + /* MCP89 chips on the MacBookAir3,1 give EPROTO when + * fetching device descriptors unless LPM is disabled. + * There are also intermittent problems enumerating + * devices with PPCD enabled. + */ + case 0x0d9d: + ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89"); + ehci->has_lpm = 0; + ehci->has_ppcd = 0; + ehci->command &= ~CMD_PPCEE; + break; } break; case PCI_VENDOR_ID_VIA: diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index a92526d6e5a..d9f78eb2657 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -98,7 +98,14 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr) */ *prev_p = *periodic_next_shadow(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p)); - *hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p)); + + if (!ehci->use_dummy_qh || + *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p)) + != EHCI_LIST_END(ehci)) + *hw_p = *shadow_next_periodic(ehci, &here, + Q_NEXT_TYPE(ehci, *hw_p)); + else + *hw_p = ehci->dummy->qh_dma; } /* how many of the uframe's 125 usecs are allocated? */ @@ -2335,7 +2342,11 @@ restart: * pointer for much longer, if at all. */ *q_p = q.itd->itd_next; - *hw_p = q.itd->hw_next; + if (!ehci->use_dummy_qh || + q.itd->hw_next != EHCI_LIST_END(ehci)) + *hw_p = q.itd->hw_next; + else + *hw_p = ehci->dummy->qh_dma; type = Q_NEXT_TYPE(ehci, q.itd->hw_next); wmb(); modified = itd_complete (ehci, q.itd); @@ -2368,7 +2379,11 @@ restart: * URB completion. */ *q_p = q.sitd->sitd_next; - *hw_p = q.sitd->hw_next; + if (!ehci->use_dummy_qh || + q.sitd->hw_next != EHCI_LIST_END(ehci)) + *hw_p = q.sitd->hw_next; + else + *hw_p = ehci->dummy->qh_dma; type = Q_NEXT_TYPE(ehci, q.sitd->hw_next); wmb(); modified = sitd_complete (ehci, q.sitd); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index bde823f704e..ba8eab366b8 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -73,6 +73,7 @@ struct ehci_hcd { /* one per controller */ /* async schedule support */ struct ehci_qh *async; + struct ehci_qh *dummy; /* For AMD quirk use */ struct ehci_qh *reclaim; unsigned scanning : 1; @@ -131,6 +132,7 @@ struct ehci_hcd { /* one per controller */ unsigned need_io_watchdog:1; unsigned broken_periodic:1; unsigned fs_i_thresh:1; /* Intel iso scheduling */ + unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 8196fa11fec..43a39eb56cc 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -70,7 +70,6 @@ #include <linux/ioport.h> #include <linux/sched.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/list.h> @@ -2684,7 +2683,7 @@ static int __devexit isp1362_remove(struct platform_device *pdev) return 0; } -static int __init isp1362_probe(struct platform_device *pdev) +static int __devinit isp1362_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct isp1362_hcd *isp1362_hcd; diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 6e7fb5f38db..ee60cd3ea64 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -12,7 +12,6 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/debugfs.h> -#include <linux/smp_lock.h> #include <asm/io.h> #include "uhci-hcd.h" diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index fef5a1f9d48..5d963e35049 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id) static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex, u32 __iomem *addr, u32 port_status) { + /* Don't allow the USB core to disable SuperSpeed ports. */ + if (xhci->port_array[wIndex] == 0x03) { + xhci_dbg(xhci, "Ignoring request to disable " + "SuperSpeed port.\n"); + return; + } + /* Write 1 to disable the port */ xhci_writel(xhci, port_status | PORT_PE, addr); port_status = xhci_readl(xhci, addr); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 202770676da..0fae58ef8af 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1045,7 +1045,7 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, if (udev->speed == USB_SPEED_SUPER) return ep->ss_ep_comp.wBytesPerInterval; - max_packet = ep->desc.wMaxPacketSize & 0x3ff; + max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize); max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11; /* A 0 in max burst means 1 transfer per ESIT */ return max_packet * (max_burst + 1); @@ -1135,7 +1135,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Fall through */ case USB_SPEED_FULL: case USB_SPEED_LOW: - max_packet = ep->desc.wMaxPacketSize & 0x3ff; + max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize); ep_ctx->ep_info2 |= MAX_PACKET(max_packet); break; default: @@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->dcbaa = NULL; scratchpad_free(xhci); + + xhci->num_usb2_ports = 0; + xhci->num_usb3_ports = 0; + kfree(xhci->usb2_ports); + kfree(xhci->usb3_ports); + kfree(xhci->port_array); + xhci->page_size = 0; xhci->page_shift = 0; xhci->bus_suspended = 0; @@ -1627,6 +1634,161 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) &xhci->ir_set->erst_dequeue); } +static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, + u32 __iomem *addr, u8 major_revision) +{ + u32 temp, port_offset, port_count; + int i; + + if (major_revision > 0x03) { + xhci_warn(xhci, "Ignoring unknown port speed, " + "Ext Cap %p, revision = 0x%x\n", + addr, major_revision); + /* Ignoring port protocol we can't understand. FIXME */ + return; + } + + /* Port offset and count in the third dword, see section 7.2 */ + temp = xhci_readl(xhci, addr + 2); + port_offset = XHCI_EXT_PORT_OFF(temp); + port_count = XHCI_EXT_PORT_COUNT(temp); + xhci_dbg(xhci, "Ext Cap %p, port offset = %u, " + "count = %u, revision = 0x%x\n", + addr, port_offset, port_count, major_revision); + /* Port count includes the current port offset */ + if (port_offset == 0 || (port_offset + port_count - 1) > num_ports) + /* WTF? "Valid values are ‘1’ to MaxPorts" */ + return; + port_offset--; + for (i = port_offset; i < (port_offset + port_count); i++) { + /* Duplicate entry. Ignore the port if the revisions differ. */ + if (xhci->port_array[i] != 0) { + xhci_warn(xhci, "Duplicate port entry, Ext Cap %p," + " port %u\n", addr, i); + xhci_warn(xhci, "Port was marked as USB %u, " + "duplicated as USB %u\n", + xhci->port_array[i], major_revision); + /* Only adjust the roothub port counts if we haven't + * found a similar duplicate. + */ + if (xhci->port_array[i] != major_revision && + xhci->port_array[i] != (u8) -1) { + if (xhci->port_array[i] == 0x03) + xhci->num_usb3_ports--; + else + xhci->num_usb2_ports--; + xhci->port_array[i] = (u8) -1; + } + /* FIXME: Should we disable the port? */ + } + xhci->port_array[i] = major_revision; + if (major_revision == 0x03) + xhci->num_usb3_ports++; + else + xhci->num_usb2_ports++; + } + /* FIXME: Should we disable ports not in the Extended Capabilities? */ +} + +/* + * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that + * specify what speeds each port is supposed to be. We can't count on the port + * speed bits in the PORTSC register being correct until a device is connected, + * but we need to set up the two fake roothubs with the correct number of USB + * 3.0 and USB 2.0 ports at host controller initialization time. + */ +static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) +{ + u32 __iomem *addr; + u32 offset; + unsigned int num_ports; + int i, port_index; + + addr = &xhci->cap_regs->hcc_params; + offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr)); + if (offset == 0) { + xhci_err(xhci, "No Extended Capability registers, " + "unable to set up roothub.\n"); + return -ENODEV; + } + + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags); + if (!xhci->port_array) + return -ENOMEM; + + /* + * For whatever reason, the first capability offset is from the + * capability register base, not from the HCCPARAMS register. + * See section 5.3.6 for offset calculation. + */ + addr = &xhci->cap_regs->hc_capbase + offset; + while (1) { + u32 cap_id; + + cap_id = xhci_readl(xhci, addr); + if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL) + xhci_add_in_port(xhci, num_ports, addr, + (u8) XHCI_EXT_PORT_MAJOR(cap_id)); + offset = XHCI_EXT_CAPS_NEXT(cap_id); + if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports) + == num_ports) + break; + /* + * Once you're into the Extended Capabilities, the offset is + * always relative to the register holding the offset. + */ + addr += offset; + } + + if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) { + xhci_warn(xhci, "No ports on the roothubs?\n"); + return -ENODEV; + } + xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n", + xhci->num_usb2_ports, xhci->num_usb3_ports); + /* + * Note we could have all USB 3.0 ports, or all USB 2.0 ports. + * Not sure how the USB core will handle a hub with no ports... + */ + if (xhci->num_usb2_ports) { + xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)* + xhci->num_usb2_ports, flags); + if (!xhci->usb2_ports) + return -ENOMEM; + + port_index = 0; + for (i = 0; i < num_ports; i++) + if (xhci->port_array[i] != 0x03) { + xhci->usb2_ports[port_index] = + &xhci->op_regs->port_status_base + + NUM_PORT_REGS*i; + xhci_dbg(xhci, "USB 2.0 port at index %u, " + "addr = %p\n", i, + xhci->usb2_ports[port_index]); + port_index++; + } + } + if (xhci->num_usb3_ports) { + xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)* + xhci->num_usb3_ports, flags); + if (!xhci->usb3_ports) + return -ENOMEM; + + port_index = 0; + for (i = 0; i < num_ports; i++) + if (xhci->port_array[i] == 0x03) { + xhci->usb3_ports[port_index] = + &xhci->op_regs->port_status_base + + NUM_PORT_REGS*i; + xhci_dbg(xhci, "USB 3.0 port at index %u, " + "addr = %p\n", i, + xhci->usb3_ports[port_index]); + port_index++; + } + } + return 0; +} int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) { @@ -1809,6 +1971,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) if (scratchpad_alloc(xhci, flags)) goto fail; + if (xhci_setup_port_arrays(xhci, flags)) + goto fail; return 0; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9f3115e729b..df558f6f84e 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2104,7 +2104,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) if (!(status & STS_EINT)) { spin_unlock(&xhci->lock); - xhci_warn(xhci, "Spurious interrupt.\n"); return IRQ_NONE; } xhci_dbg(xhci, "op reg status = %08x\n", status); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 5d7d4e951ea..45e4a3108cc 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -577,6 +577,65 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); } +static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) +{ + u64 val_64; + + /* step 2: initialize command ring buffer */ + val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | + (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, + xhci->cmd_ring->dequeue) & + (u64) ~CMD_RING_RSVD_BITS) | + xhci->cmd_ring->cycle_state; + xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n", + (long unsigned long) val_64); + xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); +} + +/* + * The whole command ring must be cleared to zero when we suspend the host. + * + * The host doesn't save the command ring pointer in the suspend well, so we + * need to re-program it on resume. Unfortunately, the pointer must be 64-byte + * aligned, because of the reserved bits in the command ring dequeue pointer + * register. Therefore, we can't just set the dequeue pointer back in the + * middle of the ring (TRBs are 16-byte aligned). + */ +static void xhci_clear_command_ring(struct xhci_hcd *xhci) +{ + struct xhci_ring *ring; + struct xhci_segment *seg; + + ring = xhci->cmd_ring; + seg = ring->deq_seg; + do { + memset(seg->trbs, 0, SEGMENT_SIZE); + seg = seg->next; + } while (seg != ring->deq_seg); + + /* Reset the software enqueue and dequeue pointers */ + ring->deq_seg = ring->first_seg; + ring->dequeue = ring->first_seg->trbs; + ring->enq_seg = ring->deq_seg; + ring->enqueue = ring->dequeue; + + /* + * Ring is now zeroed, so the HW should look for change of ownership + * when the cycle bit is set to 1. + */ + ring->cycle_state = 1; + + /* + * Reset the hardware dequeue pointer. + * Yes, this will need to be re-written after resume, but we're paranoid + * and want to make sure the hardware doesn't access bogus memory + * because, say, the BIOS or an SMI started the host without changing + * the command ring pointers. + */ + xhci_set_cmd_ring_deq(xhci); +} + /* * Stop HC (not bus-specific) * @@ -604,6 +663,7 @@ int xhci_suspend(struct xhci_hcd *xhci) spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } + xhci_clear_command_ring(xhci); /* step 3: save registers */ xhci_save_registers(xhci); @@ -635,7 +695,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - u64 val_64; int old_state, retval; old_state = hcd->state; @@ -648,15 +707,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* step 1: restore register */ xhci_restore_registers(xhci); /* step 2: initialize command ring buffer */ - val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); - val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | - (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, - xhci->cmd_ring->dequeue) & - (u64) ~CMD_RING_RSVD_BITS) | - xhci->cmd_ring->cycle_state; - xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n", - (long unsigned long) val_64); - xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); + xhci_set_cmd_ring_deq(xhci); /* step 3: restore state and start state*/ /* step 3: set CRS flag */ command = xhci_readl(xhci, &xhci->op_regs->command); @@ -714,6 +765,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) return retval; } + spin_unlock_irq(&xhci->lock); /* Re-setup MSI-X */ if (hcd->irq) free_irq(hcd->irq, hcd); @@ -736,6 +788,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) hcd->irq = pdev->irq; } + spin_lock_irq(&xhci->lock); /* step 4: set Run/Stop bit */ command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_RUN; @@ -1496,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, cmd_completion = command->completion; cmd_status = &command->status; command->command_trb = xhci->cmd_ring->enqueue; + + /* Enqueue pointer can be left pointing to the link TRB, + * we must handle that + */ + if ((command->command_trb->link.control & TRB_TYPE_BITMASK) + == TRB_TYPE(TRB_LINK)) + command->command_trb = + xhci->cmd_ring->enq_seg->next->trbs; + list_add_tail(&command->cmd_list, &virt_dev->cmd_list); } else { in_ctx = virt_dev->in_ctx; @@ -2219,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Attempt to submit the Reset Device command to the command ring */ spin_lock_irqsave(&xhci->lock, flags); reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; + + /* Enqueue pointer can be left pointing to the link TRB, + * we must handle that + */ + if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK) + == TRB_TYPE(TRB_LINK)) + reset_device_cmd->command_trb = + xhci->cmd_ring->enq_seg->next->trbs; + list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); ret = xhci_queue_reset_device(xhci, slot_id); if (ret) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 93d3bf4d213..170c367112d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -454,6 +454,24 @@ struct xhci_doorbell_array { /** + * struct xhci_protocol_caps + * @revision: major revision, minor revision, capability ID, + * and next capability pointer. + * @name_string: Four ASCII characters to say which spec this xHC + * follows, typically "USB ". + * @port_info: Port offset, count, and protocol-defined information. + */ +struct xhci_protocol_caps { + u32 revision; + u32 name_string; + u32 port_info; +}; + +#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) +#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff) +#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) + +/** * struct xhci_container_ctx * @type: Type of context. Used to calculated offsets to contained contexts. * @size: Size of the context data @@ -621,6 +639,11 @@ struct xhci_ep_ctx { #define MAX_PACKET_MASK (0xffff << 16) #define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff) +/* Get max packet size from ep desc. Bit 10..0 specify the max packet size. + * USB2.0 spec 9.6.6. + */ +#define GET_MAX_PACKET(p) ((p) & 0x7ff) + /* tx_info bitmasks */ #define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff) #define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16) @@ -1235,6 +1258,14 @@ struct xhci_hcd { u32 suspended_ports[8]; /* which ports are suspended */ unsigned long resume_done[MAX_HC_PORTS]; + /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ + u8 *port_array; + /* Array of pointers to USB 3.0 PORTSC registers */ + u32 __iomem **usb3_ports; + unsigned int num_usb3_ports; + /* Array of pointers to USB 2.0 PORTSC registers */ + u32 __iomem **usb2_ports; + unsigned int num_usb2_ports; }; /* For testing purposes */ diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 5a47805d958..c90c89dc000 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -364,7 +364,7 @@ static int mts_scsi_host_reset(struct scsi_cmnd *srb) } static int -mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback); +mts_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *srb); static void mts_transfer_cleanup( struct urb *transfer ); static void mts_do_sg(struct urb * transfer); @@ -573,7 +573,7 @@ mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc) static int -mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback) +mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback) { struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]); int err = 0; @@ -626,6 +626,8 @@ out: return err; } +static DEF_SCSI_QCMD(mts_scsi_queuecommand) + static struct scsi_host_template mts_scsi_host_template = { .module = THIS_MODULE, .name = "microtekX6", diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index 2f43c57743c..9251773ecef 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -196,11 +196,9 @@ static ssize_t get_port1_handler(struct device *dev, return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1); } -static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO, - get_port0_handler, set_port0_handler); +static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler); -static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO, - get_port1_handler, set_port1_handler); +static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler); static int cypress_probe(struct usb_interface *interface, diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c index d77aba46ae8..f63776a48e2 100644 --- a/drivers/usb/misc/trancevibrator.c +++ b/drivers/usb/misc/trancevibrator.c @@ -86,7 +86,7 @@ static ssize_t set_speed(struct device *dev, struct device_attribute *attr, return count; } -static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed); +static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR, show_speed, set_speed); static int tv_probe(struct usb_interface *interface, const struct usb_device_id *id) diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 63da2c3c838..c96f51de169 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -94,7 +94,7 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co change_color(led); \ return count; \ } \ -static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); +static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value); show_set(blue); show_set(red); show_set(green); diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index de8ef945b53..417b8f207e8 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -192,7 +192,7 @@ static ssize_t set_attr_##name(struct device *dev, \ \ return count; \ } \ -static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name); +static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_attr_##name, set_attr_##name); static ssize_t show_attr_text(struct device *dev, struct device_attribute *attr, char *buf) @@ -223,7 +223,7 @@ static ssize_t set_attr_text(struct device *dev, return count; } -static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text); +static DEVICE_ATTR(text, S_IRUGO | S_IWUSR, show_attr_text, set_attr_text); static ssize_t show_attr_decimals(struct device *dev, struct device_attribute *attr, char *buf) @@ -272,8 +272,7 @@ static ssize_t set_attr_decimals(struct device *dev, return count; } -static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO, - show_attr_decimals, set_attr_decimals); +static DEVICE_ATTR(decimals, S_IRUGO | S_IWUSR, show_attr_decimals, set_attr_decimals); static ssize_t show_attr_textmode(struct device *dev, struct device_attribute *attr, char *buf) @@ -319,8 +318,7 @@ static ssize_t set_attr_textmode(struct device *dev, return -EINVAL; } -static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO, - show_attr_textmode, set_attr_textmode); +static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode); MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered); diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 719c6180b31..ac5bfd619e6 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -536,6 +536,7 @@ static const struct file_operations yurex_fops = { .open = yurex_open, .release = yurex_release, .fasync = yurex_fasync, + .llseek = default_llseek, }; diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 44cb37b5a4d..c436e1e2c3b 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -15,7 +15,6 @@ #include <linux/poll.h> #include <linux/compat.h> #include <linux/mm.h> -#include <linux/smp_lock.h> #include <linux/scatterlist.h> #include <linux/slab.h> diff --git a/drivers/usb/mon/mon_stat.c b/drivers/usb/mon/mon_stat.c index 8ec94f15a73..e5ce42bd316 100644 --- a/drivers/usb/mon/mon_stat.c +++ b/drivers/usb/mon/mon_stat.c @@ -11,7 +11,6 @@ #include <linux/slab.h> #include <linux/usb.h> #include <linux/fs.h> -#include <linux/smp_lock.h> #include <asm/uaccess.h> #include "usb_mon.h" diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index e6669fc3b80..99beebce855 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2116,12 +2116,15 @@ bad_config: * Otherwise, wait till the gadget driver hooks up. */ if (!is_otg_enabled(musb) && is_host_enabled(musb)) { + struct usb_hcd *hcd = musb_to_hcd(musb); + MUSB_HST_MODE(musb); musb->xceiv->default_a = 1; musb->xceiv->state = OTG_STATE_A_IDLE; status = usb_add_hcd(musb_to_hcd(musb), -1, 0); + hcd->self.uses_pio_for_control = 1; DBG(1, "%s mode, status %d, devctl %02x %c\n", "HOST", status, musb_readb(musb->mregs, MUSB_DEVCTL), diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 36cfd060dbe..9d6ade82b9f 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -92,6 +92,59 @@ /* ----------------------------------------------------------------------- */ +/* Maps the buffer to dma */ + +static inline void map_dma_buffer(struct musb_request *request, + struct musb *musb) +{ + if (request->request.dma == DMA_ADDR_INVALID) { + request->request.dma = dma_map_single( + musb->controller, + request->request.buf, + request->request.length, + request->tx + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + request->mapped = 1; + } else { + dma_sync_single_for_device(musb->controller, + request->request.dma, + request->request.length, + request->tx + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + request->mapped = 0; + } +} + +/* Unmap the buffer from dma and maps it back to cpu */ +static inline void unmap_dma_buffer(struct musb_request *request, + struct musb *musb) +{ + if (request->request.dma == DMA_ADDR_INVALID) { + DBG(20, "not unmapping a never mapped buffer\n"); + return; + } + if (request->mapped) { + dma_unmap_single(musb->controller, + request->request.dma, + request->request.length, + request->tx + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + request->request.dma = DMA_ADDR_INVALID; + request->mapped = 0; + } else { + dma_sync_single_for_cpu(musb->controller, + request->request.dma, + request->request.length, + request->tx + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + + } +} + /* * Immediately complete a request. * @@ -119,24 +172,8 @@ __acquires(ep->musb->lock) ep->busy = 1; spin_unlock(&musb->lock); - if (is_dma_capable()) { - if (req->mapped) { - dma_unmap_single(musb->controller, - req->request.dma, - req->request.length, - req->tx - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->request.dma = DMA_ADDR_INVALID; - req->mapped = 0; - } else if (req->request.dma != DMA_ADDR_INVALID) - dma_sync_single_for_cpu(musb->controller, - req->request.dma, - req->request.length, - req->tx - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - } + if (is_dma_capable() && ep->dma) + unmap_dma_buffer(req, musb); if (request->status == 0) DBG(5, "%s done request %p, %d/%d\n", ep->end_point.name, request, @@ -395,6 +432,13 @@ static void txstate(struct musb *musb, struct musb_request *req) #endif if (!use_dma) { + /* + * Unmap the dma buffer back to cpu if dma channel + * programming fails + */ + if (is_dma_capable() && musb_ep->dma) + unmap_dma_buffer(req, musb); + musb_write_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); request->actual += fifo_count; @@ -713,6 +757,21 @@ static void rxstate(struct musb *musb, struct musb_request *req) return; } #endif + /* + * Unmap the dma buffer back to cpu if dma channel + * programming fails. This buffer is mapped if the + * channel allocation is successful + */ + if (is_dma_capable() && musb_ep->dma) { + unmap_dma_buffer(req, musb); + + /* + * Clear DMAENAB and AUTOCLEAR for the + * PIO mode transfer + */ + csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR); + musb_writew(epio, MUSB_RXCSR, csr); + } musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); @@ -837,7 +896,9 @@ void musb_g_rx(struct musb *musb, u8 epnum) if (!request) return; } +#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) exit: +#endif /* Analyze request */ rxstate(musb, to_musb_request(request)); } @@ -1150,26 +1211,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, request->epnum = musb_ep->current_epnum; request->tx = musb_ep->is_in; - if (is_dma_capable() && musb_ep->dma) { - if (request->request.dma == DMA_ADDR_INVALID) { - request->request.dma = dma_map_single( - musb->controller, - request->request.buf, - request->request.length, - request->tx - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - request->mapped = 1; - } else { - dma_sync_single_for_device(musb->controller, - request->request.dma, - request->request.length, - request->tx - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - request->mapped = 0; - } - } else + if (is_dma_capable() && musb_ep->dma) + map_dma_buffer(request, musb); + else request->mapped = 0; spin_lock_irqsave(&musb->lock, lockflags); @@ -1789,6 +1833,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&musb->lock, flags); if (is_otg_enabled(musb)) { + struct usb_hcd *hcd = musb_to_hcd(musb); + DBG(3, "OTG startup...\n"); /* REVISIT: funcall to other code, which also @@ -1803,6 +1849,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, musb->gadget_driver = NULL; musb->g.dev.driver = NULL; spin_unlock_irqrestore(&musb->lock, flags); + } else { + hcd->self.uses_pio_for_control = 1; } } } diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c index bdc3ea66be6..9fea48264fa 100644 --- a/drivers/usb/otg/langwell_otg.c +++ b/drivers/usb/otg/langwell_otg.c @@ -1896,7 +1896,7 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr, } return count; } -static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req); +static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req); static ssize_t get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf) @@ -1942,8 +1942,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr, } return count; } -static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO, - get_a_bus_drop, set_a_bus_drop); +static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop); static ssize_t get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf) @@ -1988,7 +1987,7 @@ set_b_bus_req(struct device *dev, struct device_attribute *attr, } return count; } -static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req); +static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req); static ssize_t set_a_clr_err(struct device *dev, struct device_attribute *attr, @@ -2012,7 +2011,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr, } return count; } -static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err); +static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); static struct attribute *inputs_attrs[] = { &dev_attr_a_bus_req.attr, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 76f8b355667..6a50965e23f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -201,6 +201,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) }, + { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) }, @@ -696,6 +697,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 263f6255119..1286f1e23d8 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -114,6 +114,9 @@ /* Lenz LI-USB Computer Interface. */ #define FTDI_LENZ_LIUSB_PID 0xD780 +/* Vardaan Enterprises Serial Interface VEUSB422R3 */ +#define FTDI_VARDAAN_PID 0xF070 + /* * Xsens Technologies BV products (http://www.xsens.com). */ @@ -721,6 +724,7 @@ */ #define RTSYSTEMS_VID 0x2100 /* Vendor ID */ #define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ +#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */ /* * Bayer Ascensia Contour blood glucose meter USB-converter cable. diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index e64da74bdcc..6954de50c0f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -21,7 +21,6 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> @@ -52,6 +51,7 @@ static struct usb_driver usb_serial_driver = { .suspend = usb_serial_suspend, .resume = usb_serial_resume, .no_dynamic_id = 1, + .supports_autosuspend = 1, }; /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead @@ -1344,6 +1344,8 @@ int usb_serial_register(struct usb_serial_driver *driver) return -ENODEV; fixup_generic(driver); + if (driver->usb_driver) + driver->usb_driver->supports_autosuspend = 1; if (!driver->description) driver->description = driver->driver.name; diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index a688b1e686e..689ee1fb702 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -285,7 +285,7 @@ static int slave_configure(struct scsi_device *sdev) /* queue a command */ /* This is always called with scsi_lock(host) held */ -static int queuecommand(struct scsi_cmnd *srb, +static int queuecommand_lck(struct scsi_cmnd *srb, void (*done)(struct scsi_cmnd *)) { struct us_data *us = host_to_us(srb->device->host); @@ -315,6 +315,8 @@ static int queuecommand(struct scsi_cmnd *srb, return 0; } +static DEF_SCSI_QCMD(queuecommand) + /*********************************************************************** * Error handling functions ***********************************************************************/ diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c index 57fc2f532ca..ceba512f84d 100644 --- a/drivers/usb/storage/sierra_ms.c +++ b/drivers/usb/storage/sierra_ms.c @@ -121,7 +121,7 @@ static ssize_t show_truinst(struct device *dev, struct device_attribute *attr, } return result; } -static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL); +static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL); int sierra_ms_init(struct us_data *us) { diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index d1268191acb..339fac3949d 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -430,7 +430,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, return 0; } -static int uas_queuecommand(struct scsi_cmnd *cmnd, +static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done)(struct scsi_cmnd *)) { struct scsi_device *sdev = cmnd->device; @@ -488,6 +488,8 @@ static int uas_queuecommand(struct scsi_cmnd *cmnd, return 0; } +static DEF_SCSI_QCMD(uas_queuecommand) + static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) { struct scsi_device *sdev = cmnd->device; |