summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/core/devices.c2
-rw-r--r--drivers/usb/core/devio.c48
-rw-r--r--drivers/usb/core/hcd.c18
-rw-r--r--drivers/usb/core/hub.c18
-rw-r--r--drivers/usb/core/message.c8
-rw-r--r--drivers/usb/core/sysfs.c6
-rw-r--r--drivers/usb/gadget/f_eem.c3
-rw-r--r--drivers/usb/gadget/multi.c2
-rw-r--r--drivers/usb/gadget/r8a66597-udc.c1
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c1
-rw-r--r--drivers/usb/host/ehci-hcd.c5
-rw-r--r--drivers/usb/host/ehci-hub.c33
-rw-r--r--drivers/usb/host/ehci-q.c11
-rw-r--r--drivers/usb/host/fhci-hcd.c3
-rw-r--r--drivers/usb/host/fhci-tds.c6
-rw-r--r--drivers/usb/host/isp1362-hcd.c25
-rw-r--r--drivers/usb/host/isp1760-hcd.c6
-rw-r--r--drivers/usb/host/r8a66597-hcd.c58
-rw-r--r--drivers/usb/host/uhci-hcd.c15
-rw-r--r--drivers/usb/host/uhci-hub.c2
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c1
-rw-r--r--drivers/usb/otg/Kconfig1
-rw-r--r--drivers/usb/serial/ftdi_sio.c25
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h18
-rw-r--r--drivers/usb/serial/generic.c10
-rw-r--r--drivers/usb/serial/sierra.c1
-rw-r--r--drivers/usb/storage/unusual_devs.h9
-rw-r--r--drivers/usb/storage/usb.c3
28 files changed, 245 insertions, 94 deletions
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 96f11715cd2..355dffcc23b 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -494,7 +494,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
return 0;
/* allocate 2^1 pages = 8K (on i386);
* should be more than enough for one device */
- pages_start = (char *)__get_free_pages(GFP_KERNEL, 1);
+ pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
if (!pages_start)
return -ENOMEM;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 6e8bcdfd23b..a678186f218 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1312,9 +1312,9 @@ static int processcompl(struct async *as, void __user * __user *arg)
void __user *addr = as->userurb;
unsigned int i;
- if (as->userbuffer)
+ if (as->userbuffer && urb->actual_length)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
- urb->transfer_buffer_length))
+ urb->actual_length))
goto err_out;
if (put_user(as->status, &userurb->status))
goto err_out;
@@ -1334,14 +1334,11 @@ static int processcompl(struct async *as, void __user * __user *arg)
}
}
- free_async(as);
-
if (put_user(addr, (void __user * __user *)arg))
return -EFAULT;
return 0;
err_out:
- free_async(as);
return -EFAULT;
}
@@ -1371,8 +1368,11 @@ static struct async *reap_as(struct dev_state *ps)
static int proc_reapurb(struct dev_state *ps, void __user *arg)
{
struct async *as = reap_as(ps);
- if (as)
- return processcompl(as, (void __user * __user *)arg);
+ if (as) {
+ int retval = processcompl(as, (void __user * __user *)arg);
+ free_async(as);
+ return retval;
+ }
if (signal_pending(current))
return -EINTR;
return -EIO;
@@ -1380,11 +1380,16 @@ static int proc_reapurb(struct dev_state *ps, void __user *arg)
static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg)
{
+ int retval;
struct async *as;
- if (!(as = async_getcompleted(ps)))
- return -EAGAIN;
- return processcompl(as, (void __user * __user *)arg);
+ as = async_getcompleted(ps);
+ retval = -EAGAIN;
+ if (as) {
+ retval = processcompl(as, (void __user * __user *)arg);
+ free_async(as);
+ }
+ return retval;
}
#ifdef CONFIG_COMPAT
@@ -1475,9 +1480,9 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
void __user *addr = as->userurb;
unsigned int i;
- if (as->userbuffer)
+ if (as->userbuffer && urb->actual_length)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
- urb->transfer_buffer_length))
+ urb->actual_length))
return -EFAULT;
if (put_user(as->status, &userurb->status))
return -EFAULT;
@@ -1497,7 +1502,6 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
}
}
- free_async(as);
if (put_user(ptr_to_compat(addr), (u32 __user *)arg))
return -EFAULT;
return 0;
@@ -1506,8 +1510,11 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
{
struct async *as = reap_as(ps);
- if (as)
- return processcompl_compat(as, (void __user * __user *)arg);
+ if (as) {
+ int retval = processcompl_compat(as, (void __user * __user *)arg);
+ free_async(as);
+ return retval;
+ }
if (signal_pending(current))
return -EINTR;
return -EIO;
@@ -1515,11 +1522,16 @@ static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg)
{
+ int retval;
struct async *as;
- if (!(as = async_getcompleted(ps)))
- return -EAGAIN;
- return processcompl_compat(as, (void __user * __user *)arg);
+ retval = -EAGAIN;
+ as = async_getcompleted(ps);
+ if (as) {
+ retval = processcompl_compat(as, (void __user * __user *)arg);
+ free_async(as);
+ }
+ return retval;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 0495fa65122..80995ef0868 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1684,6 +1684,24 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev,
}
}
if (cur_alt && new_alt) {
+ struct usb_interface *iface = usb_ifnum_to_if(udev,
+ cur_alt->desc.bInterfaceNumber);
+
+ if (iface->resetting_device) {
+ /*
+ * The USB core just reset the device, so the xHCI host
+ * and the device will think alt setting 0 is installed.
+ * However, the USB core will pass in the alternate
+ * setting installed before the reset as cur_alt. Dig
+ * out the alternate setting 0 structure, or the first
+ * alternate setting if a broken device doesn't have alt
+ * setting 0.
+ */
+ cur_alt = usb_altnum_to_altsetting(iface, 0);
+ if (!cur_alt)
+ cur_alt = &iface->altsetting[0];
+ }
+
/* Drop all the endpoints in the current alt setting */
for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
ret = hcd->driver->drop_endpoint(hcd, udev,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0cec6caf6e9..35cc8b9ba1f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3347,6 +3347,9 @@ static void hub_events(void)
USB_PORT_FEAT_C_SUSPEND);
udev = hdev->children[i-1];
if (udev) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+
usb_lock_device(udev);
ret = remote_wakeup(hdev->
children[i-1]);
@@ -3692,19 +3695,14 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
usb_enable_interface(udev, intf, true);
ret = 0;
} else {
- /* We've just reset the device, so it will think alt
- * setting 0 is installed. For usb_set_interface() to
- * work properly, we need to set the current alternate
- * interface setting to 0 (or the first alt setting, if
- * the device doesn't have alt setting 0).
+ /* Let the bandwidth allocation function know that this
+ * device has been reset, and it will have to use
+ * alternate setting 0 as the current alternate setting.
*/
- intf->cur_altsetting =
- usb_find_alt_setting(config, i, 0);
- if (!intf->cur_altsetting)
- intf->cur_altsetting =
- &config->intf_cache[i]->altsetting[0];
+ intf->resetting_device = 1;
ret = usb_set_interface(udev, desc->bInterfaceNumber,
desc->bAlternateSetting);
+ intf->resetting_device = 0;
}
if (ret < 0) {
dev_err(&udev->dev, "failed to restore interface %d "
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 1b994846e8e..9bc95fec793 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -906,11 +906,11 @@ char *usb_cache_string(struct usb_device *udev, int index)
if (index <= 0)
return NULL;
- buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
+ buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
if (buf) {
len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
if (len > 0) {
- smallbuf = kmalloc(++len, GFP_KERNEL);
+ smallbuf = kmalloc(++len, GFP_NOIO);
if (!smallbuf)
return buf;
memcpy(smallbuf, buf, len);
@@ -1731,7 +1731,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
if (cp) {
nintf = cp->desc.bNumInterfaces;
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces) {
dev_err(&dev->dev, "Out of memory\n");
return -ENOMEM;
@@ -1740,7 +1740,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
for (; n < nintf; ++n) {
new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces[n]) {
dev_err(&dev->dev, "Out of memory\n");
ret = -ENOMEM;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 485edf937f2..5f3908f6e2d 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -115,6 +115,12 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf)
case USB_SPEED_HIGH:
speed = "480";
break;
+ case USB_SPEED_VARIABLE:
+ speed = "480";
+ break;
+ case USB_SPEED_SUPER:
+ speed = "5000";
+ break;
default:
speed = "unknown";
}
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 0a577d5694f..d4f0db58a8a 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -358,7 +358,7 @@ done:
* b15: bmType (0 == data)
*/
len = skb->len;
- put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+ put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2));
/* add a zero-length EEM packet, if needed */
if (padlen)
@@ -464,7 +464,6 @@ static int eem_unwrap(struct gether *port,
}
/* validate CRC */
- crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
if (header & BIT(14)) {
crc = get_unaligned_le32(skb->data + len
- ETH_FCS_LEN);
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 429560100b1..76496f5d272 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -29,7 +29,7 @@
#if defined USB_ETH_RNDIS
# undef USB_ETH_RNDIS
#endif
-#ifdef CONFIG_USB_ETH_RNDIS
+#ifdef CONFIG_USB_G_MULTI_RNDIS
# define USB_ETH_RNDIS y
#endif
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index e220fb8091a..8b45145b913 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -26,6 +26,7 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 4b5dbd0127f..5fc80a10415 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2582,6 +2582,7 @@ err:
hsotg->gadget.dev.driver = NULL;
return ret;
}
+EXPORT_SYMBOL(usb_gadget_register_driver);
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5859522d6ed..1ec3857f22e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -787,9 +787,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
/* start 20 msec resume signaling from this port,
* and make khubd collect PORT_STAT_C_SUSPEND to
- * stop that signaling.
+ * stop that signaling. Use 5 ms extra for safety,
+ * like usb_port_resume() does.
*/
- ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+ ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 2c6571c05f3..19372673bf0 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
del_timer_sync(&ehci->watchdog);
del_timer_sync(&ehci->iaa_watchdog);
- port = HCS_N_PORTS (ehci->hcs_params);
spin_lock_irq (&ehci->lock);
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ if (hcd->self.root_hub->do_remote_wakeup) {
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ if (ehci->reset_done[port] != 0) {
+ spin_unlock_irq(&ehci->lock);
+ ehci_dbg(ehci, "suspend failed because "
+ "port %d is resuming\n",
+ port + 1);
+ return -EBUSY;
+ }
+ }
+ }
+
/* stop schedules, clean any completed work */
if (HC_IS_RUNNING(hcd->state)) {
ehci_quiesce (ehci);
@@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
*/
ehci->bus_suspended = 0;
ehci->owned_ports = 0;
+ port = HCS_N_PORTS(ehci->hcs_params);
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
@@ -178,7 +196,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
if (hostpc_reg) {
u32 t3;
+ spin_unlock_irq(&ehci->lock);
msleep(5);/* 5ms for HCD enter low pwr mode */
+ spin_lock_irq(&ehci->lock);
t3 = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
t3 = ehci_readl(ehci, hostpc_reg);
@@ -886,17 +906,18 @@ static int ehci_hub_control (
if ((temp & PORT_PE) == 0
|| (temp & PORT_RESET) != 0)
goto error;
- ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
/* After above check the port must be connected.
* Set appropriate bit thus could put phy into low power
* mode if we have hostpc feature
*/
+ temp &= ~PORT_WKCONN_E;
+ temp |= PORT_WKDISC_E | PORT_WKOC_E;
+ ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
if (hostpc_reg) {
- temp &= ~PORT_WKCONN_E;
- temp |= (PORT_WKDISC_E | PORT_WKOC_E);
- ehci_writel(ehci, temp | PORT_SUSPEND,
- status_reg);
+ spin_unlock_irqrestore(&ehci->lock, flags);
msleep(5);/* 5ms for HCD enter low pwr mode */
+ spin_lock_irqsave(&ehci->lock, flags);
temp1 = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, temp1 | HOSTPC_PHCD,
hostpc_reg);
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index a427d3b0063..89521775c56 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -849,9 +849,10 @@ qh_make (
* But interval 1 scheduling is simpler, and
* includes high bandwidth.
*/
- dbg ("intr period %d uframes, NYET!",
- urb->interval);
- goto done;
+ urb->interval = 1;
+ } else if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period << 3;
}
} else {
int think_time;
@@ -874,6 +875,10 @@ qh_make (
usb_calc_bus_time (urb->dev->speed,
is_input, 0, max_packet (maxp)));
qh->period = urb->interval;
+ if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period;
+ }
}
}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 0951818ef93..78e7c3cfcb7 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -242,9 +242,10 @@ err:
static void fhci_usb_free(void *lld)
{
struct fhci_usb *usb = lld;
- struct fhci_hcd *fhci = usb->fhci;
+ struct fhci_hcd *fhci;
if (usb) {
+ fhci = usb->fhci;
fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
fhci_ep0_free(usb);
kfree(usb->actual_frame);
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index d224ab467a4..e1232890c78 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -105,7 +105,7 @@ void fhci_ep0_free(struct fhci_usb *usb)
if (ep->td_base)
cpm_muram_free(cpm_muram_offset(ep->td_base));
- if (ep->conf_frame_Q) {
+ if (kfifo_initialized(&ep->conf_frame_Q)) {
size = cq_howmany(&ep->conf_frame_Q);
for (; size; size--) {
struct packet *pkt = cq_get(&ep->conf_frame_Q);
@@ -115,7 +115,7 @@ void fhci_ep0_free(struct fhci_usb *usb)
cq_delete(&ep->conf_frame_Q);
}
- if (ep->empty_frame_Q) {
+ if (kfifo_initialized(&ep->empty_frame_Q)) {
size = cq_howmany(&ep->empty_frame_Q);
for (; size; size--) {
struct packet *pkt = cq_get(&ep->empty_frame_Q);
@@ -125,7 +125,7 @@ void fhci_ep0_free(struct fhci_usb *usb)
cq_delete(&ep->empty_frame_Q);
}
- if (ep->dummy_packets_Q) {
+ if (kfifo_initialized(&ep->dummy_packets_Q)) {
size = cq_howmany(&ep->dummy_packets_Q);
for (; size; size--) {
u8 *buff = cq_get(&ep->dummy_packets_Q);
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 73352f3739b..42971657fde 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2270,10 +2270,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd)
dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n",
istl_size / 2, istl_size, 0, istl_size / 2);
- dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " INTL: %4d * (%3zu+8): %4d @ $%04x\n",
ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
intl_size, istl_size);
- dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " ATL : %4d * (%3zu+8): %4d @ $%04x\n",
atl_buffers, atl_blksize - PTD_HEADER_SIZE,
atl_size, istl_size + intl_size);
dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total,
@@ -2697,6 +2697,8 @@ static int __init isp1362_probe(struct platform_device *pdev)
void __iomem *data_reg;
int irq;
int retval = 0;
+ struct resource *irq_res;
+ unsigned int irq_flags = 0;
/* basic sanity checks first. board-specific init logic should
* have initialized this the three resources and probably board
@@ -2710,11 +2712,12 @@ static int __init isp1362_probe(struct platform_device *pdev)
data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- irq = platform_get_irq(pdev, 0);
- if (!addr || !data || irq < 0) {
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!addr || !data || !irq_res) {
retval = -ENODEV;
goto err1;
}
+ irq = irq_res->start;
#ifdef CONFIG_USB_HCD_DMA
if (pdev->dev.dma_mask) {
@@ -2781,12 +2784,16 @@ static int __init isp1362_probe(struct platform_device *pdev)
}
#endif
-#ifdef CONFIG_ARM
- if (isp1362_hcd->board)
- set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
-#endif
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+ irq_flags |= IRQF_TRIGGER_RISING;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+ irq_flags |= IRQF_TRIGGER_FALLING;
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+ irq_flags |= IRQF_TRIGGER_HIGH;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+ irq_flags |= IRQF_TRIGGER_LOW;
- retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err6;
pr_info("%s, irq %d\n", hcd->product_desc, irq);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 9600a58299d..27b8f7cb447 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1039,12 +1039,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
u32 buffstatus;
- /* XXX
+ /*
* NAKs are handled in HW by the chip. Usually if the
* device is not able to send data fast enough.
- * This did not trigger for a long time now.
+ * This happens mostly on slower hardware.
*/
- printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+ printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
"%d of %zu done: %08x cur: %08x\n", qtd,
urb, qh, PTD_XFERRED_LENGTH(dw3),
qtd->length, done_map,
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index b7a661c02bc..bee558aed42 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -35,7 +35,9 @@
#include <linux/usb.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/mm.h>
#include <linux/irq.h>
+#include <asm/cacheflush.h>
#include "../core/hcd.h"
#include "r8a66597.h"
@@ -216,8 +218,17 @@ static void disable_controller(struct r8a66597 *r8a66597)
{
int port;
+ /* disable interrupts */
r8a66597_write(r8a66597, 0, INTENB0);
- r8a66597_write(r8a66597, 0, INTSTS0);
+ r8a66597_write(r8a66597, 0, INTENB1);
+ r8a66597_write(r8a66597, 0, BRDYENB);
+ r8a66597_write(r8a66597, 0, BEMPENB);
+ r8a66597_write(r8a66597, 0, NRDYENB);
+
+ /* clear status */
+ r8a66597_write(r8a66597, 0, BRDYSTS);
+ r8a66597_write(r8a66597, 0, NRDYSTS);
+ r8a66597_write(r8a66597, 0, BEMPSTS);
for (port = 0; port < r8a66597->max_root_hub; port++)
r8a66597_disable_port(r8a66597, port);
@@ -811,6 +822,26 @@ static void enable_r8a66597_pipe(struct r8a66597 *r8a66597, struct urb *urb,
enable_r8a66597_pipe_dma(r8a66597, dev, pipe, urb);
}
+static void r8a66597_urb_done(struct r8a66597 *r8a66597, struct urb *urb,
+ int status)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+ if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
+ void *ptr;
+
+ for (ptr = urb->transfer_buffer;
+ ptr < urb->transfer_buffer + urb->transfer_buffer_length;
+ ptr += PAGE_SIZE)
+ flush_dcache_page(virt_to_page(ptr));
+ }
+
+ usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
+ spin_unlock(&r8a66597->lock);
+ usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb, status);
+ spin_lock(&r8a66597->lock);
+}
+
/* this function must be called with interrupt disabled */
static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address)
{
@@ -829,15 +860,9 @@ static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address)
list_del(&td->queue);
kfree(td);
- if (urb) {
- usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597),
- urb);
+ if (urb)
+ r8a66597_urb_done(r8a66597, urb, -ENODEV);
- spin_unlock(&r8a66597->lock);
- usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb,
- -ENODEV);
- spin_lock(&r8a66597->lock);
- }
break;
}
}
@@ -997,6 +1022,8 @@ static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
/* this function must be called with interrupt disabled */
static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
u16 syssts)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
{
if (syssts == SE0) {
r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
@@ -1014,7 +1041,9 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
}
+ spin_unlock(&r8a66597->lock);
usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597));
+ spin_lock(&r8a66597->lock);
}
/* this function must be called with interrupt disabled */
@@ -1274,10 +1303,7 @@ __releases(r8a66597->lock) __acquires(r8a66597->lock)
if (usb_pipeisoc(urb->pipe))
urb->start_frame = r8a66597_get_frame(hcd);
- usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
- spin_unlock(&r8a66597->lock);
- usb_hcd_giveback_urb(hcd, urb, status);
- spin_lock(&r8a66597->lock);
+ r8a66597_urb_done(r8a66597, urb, status);
}
if (restart) {
@@ -2466,6 +2492,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
r8a66597->rh_timer.data = (unsigned long)r8a66597;
r8a66597->reg = (unsigned long)reg;
+ /* make sure no interrupts are pending */
+ ret = r8a66597_clock_enable(r8a66597);
+ if (ret < 0)
+ goto clean_up3;
+ disable_controller(r8a66597);
+
for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
init_timer(&r8a66597->td_timer[i]);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 5cd0e48f67f..99cd00fd351 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -749,7 +749,20 @@ static int uhci_rh_suspend(struct usb_hcd *hcd)
spin_lock_irq(&uhci->lock);
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
rc = -ESHUTDOWN;
- else if (!uhci->dead)
+ else if (uhci->dead)
+ ; /* Dead controllers tell no tales */
+
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ else if (hcd->self.root_hub->do_remote_wakeup &&
+ uhci->resuming_ports) {
+ dev_dbg(uhci_dev(uhci), "suspend failed because a port "
+ "is resuming\n");
+ rc = -EBUSY;
+ } else
suspend_rh(uhci, UHCI_RH_SUSPENDED);
spin_unlock_irq(&uhci->lock);
return rc;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 885b585360b..8270055848c 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
/* Port received a wakeup request */
set_bit(port, &uhci->resuming_ports);
uhci->ports_timeout = jiffies +
- msecs_to_jiffies(20);
+ msecs_to_jiffies(25);
/* Make sure we see the port again
* after the resuming period is over. */
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 0025847743f..8b37a4b9839 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3245,6 +3245,7 @@ static struct usb_device_id sisusb_table [] = {
{ USB_DEVICE(0x0711, 0x0902) },
{ USB_DEVICE(0x0711, 0x0903) },
{ USB_DEVICE(0x0711, 0x0918) },
+ { USB_DEVICE(0x0711, 0x0920) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index de56b3d743d..3d2d3e549bd 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -44,6 +44,7 @@ config ISP1301_OMAP
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM
+ select USB_OTG_UTILS
help
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 216f187582a..7638828e731 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -50,7 +50,7 @@
* Version Information
*/
#define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
@@ -145,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -552,9 +557,16 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
/*
- * Due to many user requests for multiple ELV devices we enable
- * them by default.
+ * ELV devices:
*/
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
@@ -571,11 +583,17 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -697,6 +715,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index da92b4952ff..c8951aeed98 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,8 @@
/* www.candapter.com Ewert Energy Systems CANdapter device */
#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+
/* OOCDlink by Joern Kaipf <joernk@web.de>
* (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
@@ -161,22 +163,37 @@
/*
* ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
* All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
*
* The previously included PID for the UO 100 module was incorrect.
* In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
*
* Armin Laeuger originally sent the PID for the UM 100 module.
*/
+#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */
+#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */
+#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */
#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */
#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */
#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */
#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
@@ -968,6 +985,7 @@
#define PAPOUCH_VID 0x5050 /* Vendor ID */
#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
+#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */
/*
* Marvell SheevaPlug
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index f1ea3a33b6e..83443d6306d 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -386,12 +386,12 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
dbg("%s - port %d", __func__, port->number);
- if (serial->type->max_in_flight_urbs) {
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ if (serial->type->max_in_flight_urbs)
chars = port->tx_bytes_flight;
- spin_unlock_irqrestore(&port->lock, flags);
- } else if (serial->num_bulk_out)
+ else if (serial->num_bulk_out)
chars = kfifo_len(&port->write_fifo);
+ spin_unlock_irqrestore(&port->lock, flags);
dbg("%s - returns %d", __func__, chars);
return chars;
@@ -489,6 +489,8 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
dbg("%s - port %d", __func__, port->number);
if (port->serial->type->max_in_flight_urbs) {
+ kfree(urb->transfer_buffer);
+
spin_lock_irqsave(&port->lock, flags);
--port->urbs_in_flight;
port->tx_bytes_flight -= urb->transfer_buffer_length;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ac1b6449fb6..3eb6143bb64 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -298,6 +298,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
{ }
};
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 64a0a2c27e1..49575fba375 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -941,7 +941,7 @@ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
"Microtech",
"USB-SCSI-DB25",
- US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
@@ -1807,13 +1807,6 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
- "INTOVA",
- "Pixtreme",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
* Mio Moov 330
*/
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5a53d4f0dd1..e9f995486ec 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -434,7 +434,8 @@ static void adjust_quirks(struct us_data *us)
u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
unsigned f = 0;
- unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY |
+ unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
+ US_FL_FIX_CAPACITY |
US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-17 06:12:33 +0000