diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/serial/mct_u232.c | 54 | ||||
| -rw-r--r-- | drivers/usb/serial/mct_u232.h | 2 |
2 files changed, 28 insertions, 28 deletions
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 2a3fabcf518..e08c9bb403d 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -184,21 +184,21 @@ struct mct_u232_private { * we do not know how to support. We ignore them for the moment. * XXX Rate-limit the error message, it's user triggerable. */ -static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value) +static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value) { if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) { switch (value) { - case B300: return 0x01; - case B600: return 0x02; /* this one not tested */ - case B1200: return 0x03; - case B2400: return 0x04; - case B4800: return 0x06; - case B9600: return 0x08; - case B19200: return 0x09; - case B38400: return 0x0a; - case B57600: return 0x0b; - case B115200: return 0x0c; + case 300: return 0x01; + case 600: return 0x02; /* this one not tested */ + case 1200: return 0x03; + case 2400: return 0x04; + case 4800: return 0x06; + case 9600: return 0x08; + case 19200: return 0x09; + case 38400: return 0x0a; + case 57600: return 0x0b; + case 115200: return 0x0c; default: err("MCT USB-RS232: unsupported baudrate request 0x%x," " using default of B9600", value); @@ -206,27 +206,27 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value) } } else { switch (value) { - case B300: value = 300; break; - case B600: value = 600; break; - case B1200: value = 1200; break; - case B2400: value = 2400; break; - case B4800: value = 4800; break; - case B9600: value = 9600; break; - case B19200: value = 19200; break; - case B38400: value = 38400; break; - case B57600: value = 57600; break; - case B115200: value = 115200; break; - default: - err("MCT USB-RS232: unsupported baudrate request 0x%x," - " using default of B9600", value); - value = 9600; + case 300: break; + case 600: break; + case 1200: break; + case 2400: break; + case 4800: break; + case 9600: break; + case 19200: break; + case 38400: break; + case 57600: break; + case 115200: break; + default: + err("MCT USB-RS232: unsupported baudrate request 0x%x," + " using default of B9600", value); + value = 9600; } return 115200/value; } } static int mct_u232_set_baud_rate(struct usb_serial *serial, struct usb_serial_port *port, - int value) + speed_t value) { __le32 divisor; int rc; @@ -634,7 +634,7 @@ static void mct_u232_set_termios (struct usb_serial_port *port, mct_u232_set_modem_ctrl(serial, control_state); } - mct_u232_set_baud_rate(serial, port, cflag & CBAUD); + mct_u232_set_baud_rate(serial, port, tty_get_baud_rate(port->tty)); if ((cflag & CBAUD) == B0 ) { dbg("%s: baud is B0", __FUNCTION__); diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h index a61bac8f224..aae10c8174d 100644 --- a/drivers/usb/serial/mct_u232.h +++ b/drivers/usb/serial/mct_u232.h @@ -79,7 +79,7 @@ * and "Intel solution". They are the regular MCT and "Sitecom" for us. * This is pointless to document in the header, see the code for the bits. */ -static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value); +static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value); /* * Line Control Register (LCR) |