summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/wusbcore/wa-xfer.c122
1 files changed, 87 insertions, 35 deletions
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 3860bdf3a6c..d2608367365 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -367,15 +367,11 @@ static void __wa_xfer_abort_cb(struct urb *urb)
*
* The callback (see above) does nothing but freeing up the data by
* putting the URB. Because the URB is allocated at the head of the
- * struct, the whole space we allocated is kfreed.
- *
- * We'll get an 'aborted transaction' xfer result on DTI, that'll
- * politely ignore because at this point the transaction has been
- * marked as aborted already.
+ * struct, the whole space we allocated is kfreed. *
*/
-static void __wa_xfer_abort(struct wa_xfer *xfer)
+static int __wa_xfer_abort(struct wa_xfer *xfer)
{
- int result;
+ int result = -ENOMEM;
struct device *dev = &xfer->wa->usb_iface->dev;
struct wa_xfer_abort_buffer *b;
struct wa_rpipe *rpipe = xfer->ep->hcpriv;
@@ -396,7 +392,7 @@ static void __wa_xfer_abort(struct wa_xfer *xfer)
result = usb_submit_urb(&b->urb, GFP_ATOMIC);
if (result < 0)
goto error_submit;
- return; /* callback frees! */
+ return result; /* callback frees! */
error_submit:
@@ -405,7 +401,7 @@ error_submit:
xfer, result);
kfree(b);
error_kmalloc:
- return;
+ return result;
}
@@ -1295,7 +1291,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
struct wa_xfer *xfer;
struct wa_seg *seg;
struct wa_rpipe *rpipe;
- unsigned cnt;
+ unsigned cnt, done = 0, xfer_abort_pending;
unsigned rpipe_ready = 0;
xfer = urb->hcpriv;
@@ -1309,6 +1305,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
goto out;
}
spin_lock_irqsave(&xfer->lock, flags);
+ pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer));
rpipe = xfer->ep->hcpriv;
if (rpipe == NULL) {
pr_debug("%s: xfer id 0x%08X has no RPIPE. %s",
@@ -1324,9 +1321,11 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
if (xfer->seg == NULL) /* still hasn't reached */
goto out_unlock; /* setup(), enqueue_b() completes */
/* Ok, the xfer is in flight already, it's been setup and submitted.*/
- __wa_xfer_abort(xfer);
+ xfer_abort_pending = __wa_xfer_abort(xfer) >= 0;
for (cnt = 0; cnt < xfer->segs; cnt++) {
seg = xfer->seg[cnt];
+ pr_debug("%s: xfer id 0x%08X#%d status = %d\n",
+ __func__, wa_xfer_id(xfer), cnt, seg->status);
switch (seg->status) {
case WA_SEG_NOTREADY:
case WA_SEG_READY:
@@ -1335,42 +1334,50 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
WARN_ON(1);
break;
case WA_SEG_DELAYED:
+ /*
+ * delete from rpipe delayed list. If no segments on
+ * this xfer have been submitted, __wa_xfer_is_done will
+ * trigger a giveback below. Otherwise, the submitted
+ * segments will be completed in the DTI interrupt.
+ */
seg->status = WA_SEG_ABORTED;
spin_lock_irqsave(&rpipe->seg_lock, flags2);
list_del(&seg->list_node);
xfer->segs_done++;
- rpipe_ready = rpipe_avail_inc(rpipe);
spin_unlock_irqrestore(&rpipe->seg_lock, flags2);
break;
- case WA_SEG_SUBMITTED:
- seg->status = WA_SEG_ABORTED;
- usb_unlink_urb(&seg->tr_urb);
- if (xfer->is_inbound == 0)
- usb_unlink_urb(seg->dto_urb);
- xfer->segs_done++;
- rpipe_ready = rpipe_avail_inc(rpipe);
- break;
- case WA_SEG_PENDING:
- seg->status = WA_SEG_ABORTED;
- xfer->segs_done++;
- rpipe_ready = rpipe_avail_inc(rpipe);
- break;
- case WA_SEG_DTI_PENDING:
- usb_unlink_urb(wa->dti_urb);
- seg->status = WA_SEG_ABORTED;
- xfer->segs_done++;
- rpipe_ready = rpipe_avail_inc(rpipe);
- break;
case WA_SEG_DONE:
case WA_SEG_ERROR:
case WA_SEG_ABORTED:
break;
+ /*
+ * In the states below, the HWA device already knows
+ * about the transfer. If an abort request was sent,
+ * allow the HWA to process it and wait for the
+ * results. Otherwise, the DTI state and seg completed
+ * counts can get out of sync.
+ */
+ case WA_SEG_SUBMITTED:
+ case WA_SEG_PENDING:
+ case WA_SEG_DTI_PENDING:
+ /*
+ * Check if the abort was successfully sent. This could
+ * be false if the HWA has been removed but we haven't
+ * gotten the disconnect notification yet.
+ */
+ if (!xfer_abort_pending) {
+ seg->status = WA_SEG_ABORTED;
+ rpipe_ready = rpipe_avail_inc(rpipe);
+ xfer->segs_done++;
+ }
+ break;
}
}
xfer->result = urb->status; /* -ENOENT or -ECONNRESET */
- __wa_xfer_is_done(xfer);
+ done = __wa_xfer_is_done(xfer);
spin_unlock_irqrestore(&xfer->lock, flags);
- wa_xfer_completion(xfer);
+ if (done)
+ wa_xfer_completion(xfer);
if (rpipe_ready)
wa_xfer_delayed_run(rpipe);
return 0;
@@ -1441,9 +1448,51 @@ static int wa_xfer_status_to_errno(u8 status)
}
/*
+ * If a last segment flag and/or a transfer result error is encountered,
+ * no other segment transfer results will be returned from the device.
+ * Mark the remaining submitted or pending xfers as completed so that
+ * the xfer will complete cleanly.
+ */
+static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
+ struct wa_seg *incoming_seg)
+{
+ int index;
+ struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+ for (index = incoming_seg->index + 1; index < xfer->segs_submitted;
+ index++) {
+ struct wa_seg *current_seg = xfer->seg[index];
+
+ BUG_ON(current_seg == NULL);
+
+ switch (current_seg->status) {
+ case WA_SEG_SUBMITTED:
+ case WA_SEG_PENDING:
+ case WA_SEG_DTI_PENDING:
+ rpipe_avail_inc(rpipe);
+ /*
+ * do not increment RPIPE avail for the WA_SEG_DELAYED case
+ * since it has not been submitted to the RPIPE.
+ */
+ case WA_SEG_DELAYED:
+ xfer->segs_done++;
+ current_seg->status = incoming_seg->status;
+ break;
+ case WA_SEG_ABORTED:
+ break;
+ default:
+ WARN(1, "%s: xfer 0x%08X#%d. bad seg status = %d\n",
+ __func__, wa_xfer_id(xfer), index,
+ current_seg->status);
+ break;
+ }
+ }
+}
+
+/*
* Process a xfer result completion message
*
- * inbound transfers: need to schedule a DTI read
+ * inbound transfers: need to schedule a buf_in_urb read
*
* FIXME: this function needs to be broken up in parts
*/
@@ -1484,6 +1533,8 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer,
seg->result = wa_xfer_status_to_errno(usb_status);
dev_err(dev, "DTI: xfer %p#:%08X:%u failed (0x%02x)\n",
xfer, xfer->id, seg->index, usb_status);
+ seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ?
+ WA_SEG_ABORTED : WA_SEG_ERROR;
goto error_complete;
}
/* FIXME: we ignore warnings, tally them for stats */
@@ -1569,10 +1620,11 @@ error_submit_buf_in:
wa->buf_in_urb->sg = NULL;
error_sg_alloc:
__wa_xfer_abort(xfer);
-error_complete:
seg->status = WA_SEG_ERROR;
+error_complete:
xfer->segs_done++;
rpipe_ready = rpipe_avail_inc(rpipe);
+ wa_complete_remaining_xfer_segs(xfer, seg);
done = __wa_xfer_is_done(xfer);
/*
* queue work item to clear STALL for control endpoints.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-13 23:39:01 +0000