diff options
Diffstat (limited to 'drivers/usb')
90 files changed, 540 insertions, 424 deletions
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index b7eb86ad6bf..8a7eb77233b 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -686,7 +686,8 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ { int ret, len; __le32 *buf; - int offb, offd; + int offb; + unsigned int offd; const int stride = CMD_PACKET_SIZE / (4 * 2) - 1; int buflen = ((size - 1) / stride + 1 + size * 2) * 4; diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 608a2aeb400..b2df442eb3e 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -20,7 +20,7 @@ config USB_CHIPIDEA_UDC config USB_CHIPIDEA_HOST bool "ChipIdea host controller" depends on USB=y || USB=USB_CHIPIDEA - depends on USB_EHCI_HCD + depends on USB_EHCI_HCD=y select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c index 8faec9dbbb8..73f9d5f15ad 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.c +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -173,17 +173,10 @@ static int ci13xxx_imx_probe(struct platform_device *pdev) ci13xxx_imx_platdata.phy = data->phy; - if (!pdev->dev.dma_mask) { - pdev->dev.dma_mask = devm_kzalloc(&pdev->dev, - sizeof(*pdev->dev.dma_mask), GFP_KERNEL); - if (!pdev->dev.dma_mask) { - ret = -ENOMEM; - dev_err(&pdev->dev, "Failed to alloc dma_mask!\n"); - goto err; - } - *pdev->dev.dma_mask = DMA_BIT_MASK(32); - dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask); - } + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); if (usbmisc_ops && usbmisc_ops->init) { ret = usbmisc_ops->init(&pdev->dev); diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 450107e5f65..49b098bedf9 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -370,11 +370,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing resource\n"); - return -ENODEV; - } - base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 8772b365929..db535b0aa17 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -51,7 +51,7 @@ config USB_DYNAMIC_MINORS config USB_OTG bool "OTG support" - depends on USB_SUSPEND + depends on PM_RUNTIME default n help The most notable feature of USB OTG is support for a diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index caefc800f29..c88c4fb9459 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1287,9 +1287,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, goto error; } for (totlen = u = 0; u < uurb->number_of_packets; u++) { - /* arbitrary limit, - * sufficient for USB 2.0 high-bandwidth iso */ - if (isopkt[u].length > 8192) { + /* + * arbitrary limit need for USB 3.0 + * bMaxBurst (0~15 allowed, 1~16 packets) + * bmAttributes (bit 1:0, mult 0~2, 1~3 packets) + * sizemax: 1024 * 16 * 3 = 49152 + */ + if (isopkt[u].length > 49152) { ret = -EINVAL; goto error; } diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index ab5638d9c70..a6359889507 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -88,6 +88,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Alcor Micro Corp. Hub */ + { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME }, + /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index ea5ee9c21c3..757aa18027d 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -19,21 +19,21 @@ choice config USB_DWC3_HOST bool "Host only mode" - depends on USB + depends on USB=y || USB=USB_DWC3 help Select this when you want to use DWC3 in host mode only, thereby the gadget feature will be regressed. config USB_DWC3_GADGET bool "Gadget only mode" - depends on USB_GADGET + depends on USB_GADGET=y || USB_GADGET=USB_DWC3 help Select this when you want to use DWC3 in gadget mode only, thereby the host feature will be regressed. config USB_DWC3_DUAL_ROLE bool "Dual Role mode" - depends on (USB && USB_GADGET) + depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3)) help This is the default mode of working of DWC3 controller where both host and gadget features are enabled. diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index a8afe6e2662..8ce9d7fd6cf 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -95,8 +95,6 @@ static int dwc3_exynos_remove_child(struct device *dev, void *unused) return 0; } -static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32); - static int dwc3_exynos_probe(struct platform_device *pdev) { struct dwc3_exynos *exynos; @@ -118,7 +116,9 @@ static int dwc3_exynos_probe(struct platform_device *pdev) * Once we move to full device tree support this will vanish off. */ if (!dev->dma_mask) - dev->dma_mask = &dwc3_exynos_dma_mask; + dev->dma_mask = &dev->coherent_dma_mask; + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); platform_set_drvdata(pdev, exynos); @@ -164,9 +164,9 @@ static int dwc3_exynos_remove(struct platform_device *pdev) { struct dwc3_exynos *exynos = platform_get_drvdata(pdev); + device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); platform_device_unregister(exynos->usb2_phy); platform_device_unregister(exynos->usb3_phy); - device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); clk_disable_unprepare(exynos->clk); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 227d4a7acad..eba9e2baf32 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *glue = pci_get_drvdata(pci); + platform_device_unregister(glue->dwc3); platform_device_unregister(glue->usb2_phy); platform_device_unregister(glue->usb3_phy); - platform_device_unregister(glue->dwc3); pci_set_drvdata(pci, NULL); pci_disable_device(pci); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2b6e7e00120..b5e5b35df49 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1706,11 +1706,19 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) dep = dwc->eps[epnum]; if (!dep) continue; - - dwc3_free_trb_pool(dep); - - if (epnum != 0 && epnum != 1) + /* + * Physical endpoints 0 and 1 are special; they form the + * bi-directional USB endpoint 0. + * + * For those two physical endpoints, we don't allocate a TRB + * pool nor do we add them the endpoints list. Due to that, we + * shouldn't do these two operations otherwise we would end up + * with all sorts of bugs when removing dwc3.ko. + */ + if (epnum != 0 && epnum != 1) { + dwc3_free_trb_pool(dep); list_del(&dep->endpoint.ep_list); + } kfree(dep); } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 83300d94a89..f41aa0d0c41 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -146,7 +146,6 @@ config USB_LPC32XX depends on ARCH_LPC32XX depends on USB_PHY select USB_ISP1301 - select USB_OTG_UTILS help This option selects the USB device controller in the LPC32xx SoC. diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index f2a970f75bf..5a5128a226f 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1992,8 +1992,6 @@ err_map_regs: err_get_hclk: clk_put(pclk); - platform_set_drvdata(pdev, NULL); - return ret; } diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 6e6518264c4..fd24cb4540a 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -2334,21 +2334,11 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "error finding USBD resource\n"); - return -ENXIO; - } - udc->usbd_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->usbd_regs)) return PTR_ERR(udc->usbd_regs); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(dev, "error finding IUDMA resource\n"); - return -ENXIO; - } - udc->iudma_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->iudma_regs)) return PTR_ERR(udc->iudma_regs); @@ -2420,7 +2410,6 @@ static int bcm63xx_udc_remove(struct platform_device *pdev) usb_del_gadget_udc(&udc->gadget); BUG_ON(udc->driver); - platform_set_drvdata(pdev, NULL); bcm63xx_uninit_udc_hw(udc); return 0; diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 3d5cfc9c2c7..80e7f75a56c 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -821,8 +821,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget, gi->gstrings[i] = NULL; s = usb_gstrings_attach(&gi->cdev, gi->gstrings, USB_GADGET_FIRST_AVAIL_IDX); - if (IS_ERR(s)) + if (IS_ERR(s)) { + ret = PTR_ERR(s); goto err_comp_cleanup; + } gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id; gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id; @@ -847,8 +849,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget, } cfg->gstrings[i] = NULL; s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1); - if (IS_ERR(s)) + if (IS_ERR(s)) { + ret = PTR_ERR(s); goto err_comp_cleanup; + } c->iConfiguration = s[0].id; } diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a792e322f4f..c588e8e486e 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1001,7 +1001,6 @@ static int dummy_udc_remove(struct platform_device *pdev) struct dummy *dum = platform_get_drvdata(pdev); usb_del_gadget_udc(&dum->gadget); - platform_set_drvdata(pdev, NULL); device_remove_file(&dum->gadget.dev, &dev_attr_function); return 0; } @@ -2661,8 +2660,10 @@ static int __init init(void) } for (i = 0; i < mod_data.num; i++) { dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL); - if (!dum[i]) + if (!dum[i]) { + retval = -ENOMEM; goto err_add_pdata; + } retval = platform_device_add_data(the_hcd_pdev[i], &dum[i], sizeof(void *)); if (retval) diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index d893d692907..abf8a31ae14 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -816,6 +816,7 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f) * @c: the configuration to support the network link * @ethaddr: a buffer in which the ethernet address of the host side * side of the link was recorded + * @dev: eth_dev structure * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index 185d6f5e4e4..7be04b34249 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -373,6 +373,7 @@ geth_unbind(struct usb_configuration *c, struct usb_function *f) * @c: the configuration to support the network link * @ethaddr: a buffer in which the ethernet address of the host side * side of the link was recorded + * @dev: eth_dev structure * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c index c7468b6c07b..03c1fb68664 100644 --- a/drivers/usb/gadget/f_uac2.c +++ b/drivers/usb/gadget/f_uac2.c @@ -456,8 +456,6 @@ static int snd_uac2_remove(struct platform_device *pdev) { struct snd_card *card = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - if (card) return snd_card_free(card); diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index cec8871b77f..b8632d40f8b 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -1461,8 +1461,10 @@ static int __init fusb300_probe(struct platform_device *pdev) fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep, GFP_KERNEL); - if (fusb300->ep0_req == NULL) + if (fusb300->ep0_req == NULL) { + ret = -ENOMEM; goto clean_up3; + } init_controller(fusb300); ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget); diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index b5cebd6b0d7..9b2d24e4c95 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1511,8 +1511,6 @@ static int __exit imx_udc_remove(struct platform_device *pdev) if (pdata->exit) pdata->exit(&pdev->dev); - platform_set_drvdata(pdev, NULL); - return 0; } diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 866ef099924..51cfe72da5b 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1660,8 +1660,10 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->epaddr2ep[0] = &m66592->ep[0]; m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL); - if (m66592->ep0_req == NULL) + if (m66592->ep0_req == NULL) { + ret = -ENOMEM; goto clean_up3; + } m66592->ep0_req->complete = nop_completion; init_controller(m66592); diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index ef47495dec8..95c531d5aa4 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2236,7 +2236,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev) dev->transceiver = NULL; } - platform_set_drvdata(pdev, NULL); the_controller = NULL; return 0; } diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 0b742d17184..7ff7d9cf206 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1977,8 +1977,10 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep, GFP_KERNEL); - if (r8a66597->ep0_req == NULL) + if (r8a66597->ep0_req == NULL) { + ret = -ENOMEM; goto clean_up3; + } r8a66597->ep0_req->complete = nop_completion; ret = usb_add_gadget_udc(&pdev->dev, &r8a66597->gadget); diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index a3cdc32115d..af22f24046b 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -437,7 +437,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, if (hs_req->req.length == 0) return; - usb_gadget_unmap_request(&hsotg->gadget, hs_req, hs_ep->dir_in); + usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in); } /** diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index d0e75e1b3cc..09c4f70c93c 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1851,6 +1851,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) irq = gpio_to_irq(udc_info->vbus_pin); if (irq < 0) { dev_err(dev, "no irq for gpio vbus pin\n"); + retval = irq; goto err_gpio_claim; } @@ -1948,8 +1949,6 @@ static int s3c2410_udc_remove(struct platform_device *pdev) iounmap(base_addr); release_mem_region(rsrc_start, rsrc_len); - platform_set_drvdata(pdev, NULL); - if (!IS_ERR(udc_clock) && udc_clock != NULL) { clk_disable(udc_clock); clk_put(udc_clock); diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 2cd6262e8b7..0deb9d6cde2 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -284,12 +284,16 @@ static int __init zero_bind(struct usb_composite_dev *cdev) ss_opts->bulk_buflen = gzero_options.bulk_buflen; func_ss = usb_get_function(func_inst_ss); - if (IS_ERR(func_ss)) + if (IS_ERR(func_ss)) { + status = PTR_ERR(func_ss); goto err_put_func_inst_ss; + } func_inst_lb = usb_get_function_instance("Loopback"); - if (IS_ERR(func_inst_lb)) + if (IS_ERR(func_inst_lb)) { + status = PTR_ERR(func_inst_lb); goto err_put_func_ss; + } lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst); lb_opts->bulk_buflen = gzero_options.bulk_buflen; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index de94f269906..344d5e2f87d 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -507,7 +507,7 @@ endif # USB_OHCI_HCD config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on PCI || SPARC_LEON || ARCH_VT8500 + depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -524,26 +524,19 @@ config USB_UHCI_HCD config USB_UHCI_SUPPORT_NON_PCI_HC bool - depends on USB_UHCI_HCD - default y if (SPARC_LEON || ARCH_VT8500) + default y if (SPARC_LEON || USB_UHCI_PLATFORM) config USB_UHCI_PLATFORM - bool "Generic UHCI Platform Driver support" - depends on USB_UHCI_SUPPORT_NON_PCI_HC + bool default y if ARCH_VT8500 - ---help--- - Enable support for generic UHCI platform devices that require no - additional configuration. config USB_UHCI_BIG_ENDIAN_MMIO bool - depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON - default y + default y if SPARC_LEON config USB_UHCI_BIG_ENDIAN_DESC bool - depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON - default y + default y if SPARC_LEON config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 66420097c24..02f4611faa6 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -63,8 +63,6 @@ static void atmel_stop_ehci(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); - static int ehci_atmel_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -93,7 +91,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &at91_ehci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 312fc10da3c..246e124e6ac 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1286,23 +1286,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_sead3_driver #endif -#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ - !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ - !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \ - !IS_ENABLED(CONFIG_USB_EHCI_S5P) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \ - !IS_ENABLED(CONFIG_USB_EHCI_MSM) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && \ - !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) -#error "missing bus glue for ehci-hcd" -#endif - static int __init ehci_hcd_init(void) { int retval = 0; diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 3d1491b5f36..16d7150e855 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -90,8 +90,6 @@ static const struct ehci_driver_overrides ehci_omap_overrides __initdata = { .extra_priv_size = sizeof(struct omap_hcd), }; -static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32); - /** * ehci_hcd_omap_probe - initialize TI-based HCDs * @@ -146,8 +144,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &omap_ehci_dma_mask; + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, dev_name(dev)); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 54c57948515..efbc588b48c 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -137,8 +137,6 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, } } -static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32); - static int ehci_orion_drv_probe(struct platform_device *pdev) { struct orion_ehci_data *pd = pdev->dev.platform_data; @@ -183,7 +181,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) * now. Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &ehci_orion_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index f47f2594c9d..d1f5cea435a 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -48,6 +48,12 @@ static int ehci_platform_reset(struct usb_hcd *hcd) ehci->big_endian_desc = pdata->big_endian_desc; ehci->big_endian_mmio = pdata->big_endian_mmio; + if (pdata->pre_setup) { + retval = pdata->pre_setup(hcd); + if (retval < 0) + return retval; + } + ehci->caps = hcd->regs + pdata->caps_offset; retval = ehci_setup(hcd); if (retval) diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 635775278c7..379037f51a2 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -71,8 +71,6 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev) dev_err(dev, "can't request ehci vbus gpio %d", gpio); } -static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32); - static int s5p_ehci_probe(struct platform_device *pdev) { struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; @@ -90,7 +88,7 @@ static int s5p_ehci_probe(struct platform_device *pdev) * Once we move to full device tree support this will vanish off. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &ehci_s5p_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; if (!pdev->dev.coherent_dma_mask) pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); @@ -107,6 +105,7 @@ static int s5p_ehci_probe(struct platform_device *pdev) if (IS_ERR(phy)) { /* Fallback to pdata */ if (!pdata) { + usb_put_hcd(hcd); dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); return -EPROBE_DEFER; } else { diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index acff5b8f6e8..f80d0330d54 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask) } static const unsigned char -max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 }; +max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 }; /* carryover low/fullspeed bandwidth that crosses uframe boundries */ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8]) @@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) /* reschedule QH iff another request is queued */ if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { rc = qh_schedule(ehci, qh); + if (rc == 0) { + qh_refresh(ehci, qh); + qh_link_periodic(ehci, qh); + } /* An error here likely indicates handshake failure * or no space left in the schedule. Neither fault @@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) * * FIXME kill the now-dysfunctional queued urbs */ - if (rc != 0) + else { ehci_err(ehci, "can't reschedule qh %p, err %d\n", qh, rc); + } } /* maybe turn off periodic schedule */ diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 61ecfb3d52f..bd3e5cbc624 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -58,8 +58,6 @@ static int ehci_spear_drv_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend, ehci_spear_drv_resume); -static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32); - static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd ; @@ -84,7 +82,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &spear_ehci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index e3eddc31ac8..59d111bf44a 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -637,8 +637,6 @@ static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) writel(val, base + TEGRA_USB_PORTSC1); } -static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); - static int tegra_ehci_probe(struct platform_device *pdev) { struct resource *res; @@ -661,7 +659,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &tegra_ehci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); setup_vbus_gpio(pdev, pdata); diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 125e261f5bf..2facee53eab 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1739,7 +1739,7 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf) int retval = 1; unsigned long flags; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ + /* if !PM_RUNTIME, root hub timers won't get shut down ... */ if (!HC_IS_RUNNING(hcd->state)) return 0; diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index bbb791bd761..a13709ee4e5 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -373,8 +373,10 @@ static int isp1760_plat_probe(struct platform_device *pdev) irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) { pr_warning("isp1760: IRQ resource not available\n"); - return -ENODEV; + ret = -ENODEV; + goto cleanup; } + irqflags |= irq_res->flags & IRQF_TRIGGER_MASK; if (priv) { diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a0cb44f0e72..2ee1496dbc1 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -504,8 +504,6 @@ static const struct of_device_id at91_ohci_dt_ids[] = { MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); -static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); - static int ohci_at91_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -522,7 +520,9 @@ static int ohci_at91_of_init(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &at91_ohci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 07592c00af2..b0b542c14e3 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -98,8 +98,6 @@ static const struct hc_driver exynos_ohci_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32); - static int exynos_ohci_probe(struct platform_device *pdev) { struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; @@ -117,7 +115,7 @@ static int exynos_ohci_probe(struct platform_device *pdev) * Once we move to full device tree support this will vanish off. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &ohci_exynos_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; if (!pdev->dev.coherent_dma_mask) pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 9e6de9586ae..fc627fd5411 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -233,14 +233,14 @@ static int ohci_urb_enqueue ( urb->start_frame = frame; } } else if (ed->type == PIPE_ISOCHRONOUS) { - u16 next = ohci_frame_no(ohci) + 2; + u16 next = ohci_frame_no(ohci) + 1; u16 frame = ed->last_iso + ed->interval; /* Behind the scheduling threshold? */ if (unlikely(tick_before(frame, next))) { /* USB_ISO_ASAP: Round up to the first available slot */ - if (urb->transfer_flags & URB_ISO_ASAP) + if (urb->transfer_flags & URB_ISO_ASAP) { frame += (next - frame + ed->interval - 1) & -ed->interval; @@ -248,21 +248,25 @@ static int ohci_urb_enqueue ( * Not ASAP: Use the next slot in the stream. If * the entire URB falls before the threshold, fail. */ - else if (tick_before(frame + ed->interval * + } else { + if (tick_before(frame + ed->interval * (urb->number_of_packets - 1), next)) { - retval = -EXDEV; - usb_hcd_unlink_urb_from_ep(hcd, urb); - goto fail; - } + retval = -EXDEV; + usb_hcd_unlink_urb_from_ep(hcd, urb); + goto fail; + } - /* - * Some OHCI hardware doesn't handle late TDs - * correctly. After retiring them it proceeds to - * the next ED instead of the next TD. Therefore - * we have to omit the late TDs entirely. - */ - urb_priv->td_cnt = DIV_ROUND_UP(next - frame, - ed->interval); + /* + * Some OHCI hardware doesn't handle late TDs + * correctly. After retiring them it proceeds + * to the next ED instead of the next TD. + * Therefore we have to omit the late TDs + * entirely. + */ + urb_priv->td_cnt = DIV_ROUND_UP( + (u16) (next - frame), + ed->interval); + } } urb->start_frame = frame; } diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index f4988fbe78e..5d7eb72c506 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -223,8 +223,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) isp1301_i2c_client = isp1301_get_client(isp1301_node); if (!isp1301_i2c_client) { - ret = -EPROBE_DEFER; - goto out; + return -EPROBE_DEFER; } pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); @@ -234,7 +233,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (usb_disabled()) { dev_err(&pdev->dev, "USB is disabled\n"); ret = -ENODEV; - goto out; + goto fail_disable; } /* Enable AHB slave USB clock, needed for further USB clock control */ @@ -245,19 +244,19 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_pll_clk)) { dev_err(&pdev->dev, "failed to acquire USB PLL\n"); ret = PTR_ERR(usb_pll_clk); - goto out1; + goto fail_pll; } ret = clk_enable(usb_pll_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB PLL\n"); - goto out2; + goto fail_pllen; } ret = clk_set_rate(usb_pll_clk, 48000); if (ret < 0) { dev_err(&pdev->dev, "failed to set USB clock rate\n"); - goto out3; + goto fail_rate; } /* Enable USB device clock */ @@ -265,13 +264,13 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_dev_clk)) { dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); ret = PTR_ERR(usb_dev_clk); - goto out4; + goto fail_dev; } ret = clk_enable(usb_dev_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); - goto out5; + goto fail_deven; } /* Enable USB otg clocks */ @@ -279,7 +278,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_otg_clk)) { dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); ret = PTR_ERR(usb_otg_clk); - goto out6; + goto fail_otg; } __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); @@ -287,7 +286,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) ret = clk_enable(usb_otg_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); - goto out7; + goto fail_otgen; } isp1301_configure(); @@ -296,20 +295,14 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (!hcd) { dev_err(&pdev->dev, "Failed to allocate HC buffer\n"); ret = -ENOMEM; - goto out8; + goto fail_hcd; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get MEM resource\n"); - ret = -ENOMEM; - goto out8; - } - hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); - goto out8; + goto fail_resource; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); @@ -317,7 +310,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = -ENXIO; - goto out8; + goto fail_resource; } nxp_start_hc(); @@ -331,23 +324,24 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) return ret; nxp_stop_hc(); -out8: +fail_resource: usb_put_hcd(hcd); -out7: +fail_hcd: clk_disable(usb_otg_clk); -out6: +fail_otgen: clk_put(usb_otg_clk); -out5: +fail_otg: clk_disable(usb_dev_clk); -out4: +fail_deven: clk_put(usb_dev_clk); -out3: +fail_dev: +fail_rate: clk_disable(usb_pll_clk); -out2: +fail_pllen: clk_put(usb_pll_clk); -out1: +fail_pll: +fail_disable: isp1301_i2c_client = NULL; -out: return ret; } diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index ddfc31427bc..8663851c8d8 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -114,8 +114,6 @@ static const struct hc_driver ohci_omap3_hc_driver = { /*-------------------------------------------------------------------------*/ -static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32); - /* * configure so an HC device and id are always provided * always called with process context; sleeping is OK @@ -168,8 +166,10 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &omap_ohci_dma_mask; + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, dev_name(dev)); diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index efe71f3ca47..279b2ef1741 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -282,8 +282,6 @@ static const struct of_device_id pxa_ohci_dt_ids[] = { MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids); -static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32); - static int ohci_pxa_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -298,7 +296,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pxa_ohci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 9020bf0e2ec..3e19e0170d1 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -91,8 +91,6 @@ static const struct hc_driver ohci_spear_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32); - static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) { const struct hc_driver *driver = &ohci_spear_hc_driver; @@ -114,7 +112,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &spear_ohci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 4f0f0339532..0f401dbfaf0 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -3084,7 +3084,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf) int ports, i, retval = 1; unsigned long flags; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ + /* if !PM_RUNTIME, root hub timers won't get shut down ... */ if (!HC_IS_RUNNING(hcd->state)) return 0; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index ad4483efb6d..b2ec7fe758d 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -22,7 +22,7 @@ * and usb-storage. * * TODO: - * - usb suspend/resume triggered by sl811 (with USB_SUSPEND) + * - usb suspend/resume triggered by sl811 (with PM_RUNTIME) * - various issues noted in the code * - performance work; use both register banks; ... * - use urb->iso_frame_desc[] with ISO transfers diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index f87bee6d278..9189bc984c9 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -225,7 +225,8 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) /* auto-stop if nothing connected for 1 second */ if (any_ports_active(uhci)) uhci->rh_state = UHCI_RH_RUNNING; - else if (time_after_eq(jiffies, uhci->auto_stop_time)) + else if (time_after_eq(jiffies, uhci->auto_stop_time) && + !uhci->wait_for_hp) suspend_rh(uhci, UHCI_RH_AUTO_STOPPED); break; diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index 8c4dace4b14..f1db61ada6a 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -60,8 +60,6 @@ static const struct hc_driver uhci_platform_hc_driver = { .hub_control = uhci_hub_control, }; -static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32); - static int uhci_hcd_platform_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -78,7 +76,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &platform_uhci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev, pdev->name); diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index f0976d8190b..041c6ddb695 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1287,7 +1287,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, return -EINVAL; /* Can't change the period */ } else { - next = uhci->frame_number + 2; + next = uhci->frame_number + 1; /* Find the next unused frame */ if (list_empty(&qh->queue)) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 965b539bc47..fbf75e57628 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1423,15 +1423,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep)); /* Set the max packet size and max burst */ + max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); + max_burst = 0; switch (udev->speed) { case USB_SPEED_SUPER: - max_packet = usb_endpoint_maxp(&ep->desc); - ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); /* dig out max burst from ep companion desc */ - max_packet = ep->ss_ep_comp.bMaxBurst; - ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet)); + max_burst = ep->ss_ep_comp.bMaxBurst; break; case USB_SPEED_HIGH: + /* Some devices get this wrong */ + if (usb_endpoint_xfer_bulk(&ep->desc)) + max_packet = 512; /* bits 11:12 specify the number of additional transaction * opportunities per microframe (USB 2.0, section 9.6.6) */ @@ -1439,17 +1441,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, usb_endpoint_xfer_int(&ep->desc)) { max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11; - ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst)); } - /* Fall through */ + break; case USB_SPEED_FULL: case USB_SPEED_LOW: - max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); - ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); break; default: BUG(); } + ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) | + MAX_BURST(max_burst)); max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep); ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload)); @@ -1826,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); + if (!xhci->rh_bw) + goto no_bw; + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); for (i = 0; i < num_ports; i++) { struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; @@ -1844,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } } +no_bw: xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; xhci->num_active_eps = 0; @@ -2255,6 +2260,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) u32 page_size, temp; int i; + INIT_LIST_HEAD(&xhci->lpm_failed_devs); + INIT_LIST_HEAD(&xhci->cancel_cmd_list); + page_size = xhci_readl(xhci, &xhci->op_regs->page_size); xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size); for (i = 0; i < 16; i++) { @@ -2333,7 +2341,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags); if (!xhci->cmd_ring) goto fail; - INIT_LIST_HEAD(&xhci->cancel_cmd_list); xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring); xhci_dbg(xhci, "First segment DMA is 0x%llx\n", (unsigned long long)xhci->cmd_ring->first_seg->dma); @@ -2444,8 +2451,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) if (xhci_setup_port_arrays(xhci, flags)) goto fail; - INIT_LIST_HEAD(&xhci->lpm_failed_devs); - /* Enable USB 3.0 device notifications for function remote wake, which * is necessary for allowing USB 3.0 devices to do remote wakeup from * U3 (device suspend). diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1a30c380043..cc24e39b97d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev) static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + /* + * Systems with the TI redriver that loses port status change events + * need to have the registers polled during D3, so avoid D3cold. + */ + if (xhci_compliance_mode_recovery_timer_quirk_check()) + pdev->no_d3cold = true; return xhci_suspend(xhci); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b4aa79d154b..d8f640b12dd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) * Systems: * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 */ -static bool compliance_mode_recovery_timer_quirk_check(void) +bool xhci_compliance_mode_recovery_timer_quirk_check(void) { const char *dmi_product_name, *dmi_sys_vendor; @@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg(xhci, "Finished xhci_init\n"); /* Initializing Compliance Mode Recovery Data If Needed */ - if (compliance_mode_recovery_timer_quirk_check()) { + if (xhci_compliance_mode_recovery_timer_quirk_check()) { xhci->quirks |= XHCI_COMP_MODE_QUIRK; compliance_mode_recovery_timer_init(xhci); } @@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; + bool comp_timer_running = false; /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. @@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* If restore operation fails, re-initialize the HC during resume */ if ((temp & STS_SRE) || hibernated) { + + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + !(xhci_all_ports_seen_u0(xhci))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n"); + } + /* Let the USB core know _both_ roothubs lost power. */ usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); @@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) retval = xhci_init(hcd->primary_hcd); if (retval) return retval; + comp_timer_running = true; + xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); if (!retval) { @@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) * to suffer the Compliance Mode issue again. It doesn't matter if * ports have entered previously to U0 before system's suspension. */ - if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running) compliance_mode_recovery_timer_init(xhci); /* Re-enable port polling. */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 29c978e3713..77600cefcaf 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index); +/* xHCI quirks */ +bool xhci_compliance_mode_recovery_timer_quirk_check(void); + #endif /* __LINUX_XHCI_HCD_H */ diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 3a18e44e939..e1b661d0402 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -560,6 +560,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) if (!config) { dev_err(&pdev->dev, "failed to allocate musb hdrc config\n"); + ret = -ENOMEM; goto err2; } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 8914dec49f0..9d3044bdebe 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum) void __iomem *mbase = musb->mregs; struct dma_channel *dma; bool transfer_pending = false; - static bool use_sg; musb_ep_select(mbase, epnum); tx_csr = musb_readw(epio, MUSB_TXCSR); @@ -1463,9 +1462,9 @@ done: * NULL. */ if (!urb->transfer_buffer) - use_sg = true; + qh->use_sg = true; - if (use_sg) { + if (qh->use_sg) { /* sg_miter_start is already done in musb_ep_program */ if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); @@ -1484,9 +1483,9 @@ done: qh->segsize = length; - if (use_sg) { + if (qh->use_sg) { if (offset + length >= urb->transfer_buffer_length) - use_sg = false; + qh->use_sg = false; } musb_ep_select(mbase, epnum); @@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) bool done = false; u32 status; struct dma_channel *dma; - static bool use_sg; unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG; musb_ep_select(mbase, epnum); @@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) * NULL. */ if (!urb->transfer_buffer) { - use_sg = true; + qh->use_sg = true; sg_miter_start(&qh->sg_miter, urb->sg, 1, sg_flags); } - if (use_sg) { + if (qh->use_sg) { if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); sg_miter_stop(&qh->sg_miter); @@ -1913,8 +1911,8 @@ finish: urb->actual_length += xfer_len; qh->offset += xfer_len; if (done) { - if (use_sg) - use_sg = false; + if (qh->use_sg) + qh->use_sg = false; if (urb->status == -EINPROGRESS) urb->status = status; diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 5a9c8feec10..738f7eb60df 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -74,6 +74,7 @@ struct musb_qh { u16 frame; /* for periodic schedule */ unsigned iso_idx; /* in urb->iso_frame_desc[] */ struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */ + bool use_sg; /* to track urb using sglist */ }; /* map from control or bulk queue head to the first qh on that ring */ diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 3551f1a30c6..628b93fe5cc 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -549,7 +549,8 @@ static int omap2430_probe(struct platform_device *pdev) glue->control_otghs = omap_get_control_dev(); if (IS_ERR(glue->control_otghs)) { dev_vdbg(&pdev->dev, "Failed to get control device\n"); - return -ENODEV; + ret = PTR_ERR(glue->control_otghs); + goto err2; } } else { glue->control_otghs = ERR_PTR(-ENODEV); diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 371d0e74e90..13c09c299f1 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -25,7 +25,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND + depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME select USB_OTG help Enable this to support Freescale USB OTG transceiver. @@ -139,7 +139,6 @@ config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET depends on I2C - select USB_OTG_UTILS help Say Y here to add support for the NXP ISP1301 USB transceiver driver. This chip is typically used as USB transceiver for USB host, gadget @@ -162,7 +161,7 @@ config USB_MSM_OTG config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND + depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME select USB_OTG help Say Y here if you want to build Marvell USB OTG transciever @@ -181,15 +180,15 @@ config USB_MXS_PHY MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. config USB_RCAR_PHY - tristate "Renesas R-Car USB phy support" + tristate "Renesas R-Car USB PHY support" depends on USB || USB_GADGET help - Say Y here to add support for the Renesas R-Car USB phy driver. - This chip is typically used as USB phy for USB host, gadget. - This driver supports: R8A7779 + Say Y here to add support for the Renesas R-Car USB common PHY driver. + This chip is typically used as USB PHY for USB host, gadget. + This driver supports R8A7778 and R8A7779. To compile this driver as a module, choose M here: the - module will be called rcar-phy. + module will be called phy-rcar-usb. config USB_ULPI bool "Generic ULPI Transceiver Driver" diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 4acef26a2ef..e5eb1b5a04e 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -892,8 +892,6 @@ static int ab8500_usb_remove(struct platform_device *pdev) else if (ab->mode == USB_PERIPHERAL) ab8500_usb_peri_phy_dis(ab); - platform_set_drvdata(pdev, NULL); - return 0; } diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 97b9308507c..e771bafb9f1 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -799,6 +799,7 @@ static int fsl_otg_conf(struct platform_device *pdev) /* initialize the otg structure */ fsl_otg_tc->phy.label = DRIVER_DESC; + fsl_otg_tc->phy.dev = &pdev->dev; fsl_otg_tc->phy.set_power = fsl_otg_set_power; fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy; diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index 4c76074e518..8443335c2ea 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -266,6 +266,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) platform_set_drvdata(pdev, gpio_vbus); gpio_vbus->dev = &pdev->dev; gpio_vbus->phy.label = "gpio-vbus"; + gpio_vbus->phy.dev = gpio_vbus->dev; gpio_vbus->phy.set_power = gpio_vbus_set_power; gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend; gpio_vbus->phy.state = OTG_STATE_UNDEFINED; @@ -343,7 +344,6 @@ err_irq: gpio_free(pdata->gpio_pullup); gpio_free(pdata->gpio_vbus); err_gpio: - platform_set_drvdata(pdev, NULL); kfree(gpio_vbus->phy.otg); kfree(gpio_vbus); return err; @@ -365,7 +365,6 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev) if (gpio_is_valid(pdata->gpio_pullup)) gpio_free(pdata->gpio_pullup); gpio_free(gpio); - platform_set_drvdata(pdev, NULL); kfree(gpio_vbus->phy.otg); kfree(gpio_vbus); diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c index 225ae6c97ee..8a55b37d1a0 100644 --- a/drivers/usb/phy/phy-isp1301.c +++ b/drivers/usb/phy/phy-isp1301.c @@ -102,6 +102,7 @@ static int isp1301_probe(struct i2c_client *client, mutex_init(&isp->mutex); phy = &isp->phy; + phy->dev = &client->dev; phy->label = DRV_NAME; phy->init = isp1301_phy_init; phy->set_vbus = isp1301_phy_set_vbus; diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c index f7838a43347..1568ea63e33 100644 --- a/drivers/usb/phy/phy-mv-u3d-usb.c +++ b/drivers/usb/phy/phy-mv-u3d-usb.c @@ -278,11 +278,6 @@ static int mv_u3d_phy_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing mem resource\n"); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, res); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index c987bbe2785..4a6b03c7387 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -667,7 +667,6 @@ int mv_otg_remove(struct platform_device *pdev) mv_otg_disable(mvotg); usb_remove_phy(&mvotg->phy); - platform_set_drvdata(pdev, NULL); return 0; } @@ -850,8 +849,6 @@ err_destroy_workqueue: flush_workqueue(mvotg->qwork); destroy_workqueue(mvotg->qwork); - platform_set_drvdata(pdev, NULL); - return retval; } diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 9d4381e64d5..bd601c537c8 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -130,11 +130,6 @@ static int mxs_phy_probe(struct platform_device *pdev) int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get device resources\n"); - return -ENOENT; - } - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); @@ -160,6 +155,7 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->phy.set_suspend = mxs_phy_suspend; mxs_phy->phy.notify_connect = mxs_phy_on_connect; mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; + mxs_phy->phy.type = USB_PHY_TYPE_USB2; ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); @@ -180,8 +176,6 @@ static int mxs_phy_remove(struct platform_device *pdev) usb_remove_phy(&mxs_phy->phy); - platform_set_drvdata(pdev, NULL); - return 0; } diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c index 2b10cc969bb..638cc5dade3 100644 --- a/drivers/usb/phy/phy-nop.c +++ b/drivers/usb/phy/phy-nop.c @@ -254,8 +254,6 @@ static int nop_usb_xceiv_remove(struct platform_device *pdev) usb_remove_phy(&nop->phy); - platform_set_drvdata(pdev, NULL); - return 0; } diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c index a35681b0c50..ae909408958 100644 --- a/drivers/usb/phy/phy-rcar-usb.c +++ b/drivers/usb/phy/phy-rcar-usb.c @@ -1,8 +1,9 @@ /* * Renesas R-Car USB phy driver * - * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012-2013 Renesas Solutions Corp. * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * Copyright (C) 2013 Cogent Embedded, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,17 +16,41 @@ #include <linux/platform_device.h> #include <linux/spinlock.h> #include <linux/module.h> - -/* USBH common register */ -#define USBPCTRL0 0x0800 -#define USBPCTRL1 0x0804 -#define USBST 0x0808 -#define USBEH0 0x080C -#define USBOH0 0x081C -#define USBCTL0 0x0858 -#define EIIBC1 0x0094 -#define EIIBC2 0x009C - +#include <linux/platform_data/usb-rcar-phy.h> + +/* REGS block */ +#define USBPCTRL0 0x00 +#define USBPCTRL1 0x04 +#define USBST 0x08 +#define USBEH0 0x0C +#define USBOH0 0x1C +#define USBCTL0 0x58 + +/* High-speed signal quality characteristic control registers (R8A7778 only) */ +#define HSQCTL1 0x24 +#define HSQCTL2 0x28 + +/* USBPCTRL0 */ +#define OVC2 (1 << 10) /* (R8A7779 only) */ + /* Switches the OVC input pin for port 2: */ + /* 1: USB_OVC2, 0: OVC2 */ +#define OVC1_VBUS1 (1 << 9) /* Switches the OVC input pin for port 1: */ + /* 1: USB_OVC1, 0: OVC1/VBUS1 */ + /* Function mode: set to 0 */ +#define OVC0 (1 << 8) /* Switches the OVC input pin for port 0: */ + /* 1: USB_OVC0 pin, 0: OVC0 */ +#define OVC2_ACT (1 << 6) /* (R8A7779 only) */ + /* Host mode: OVC2 polarity: */ + /* 1: active-high, 0: active-low */ +#define PENC (1 << 4) /* Function mode: output level of PENC1 pin: */ + /* 1: high, 0: low */ +#define OVC0_ACT (1 << 3) /* Host mode: OVC0 polarity: */ + /* 1: active-high, 0: active-low */ +#define OVC1_ACT (1 << 1) /* Host mode: OVC1 polarity: */ + /* 1: active-high, 0: active-low */ + /* Function mode: be sure to set to 1 */ +#define PORT1 (1 << 0) /* Selects port 1 mode: */ + /* 1: function, 0: host */ /* USBPCTRL1 */ #define PHY_RST (1 << 2) #define PLL_ENB (1 << 1) @@ -58,8 +83,10 @@ static int rcar_usb_phy_init(struct usb_phy *phy) { struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); struct device *dev = phy->dev; + struct rcar_phy_platform_data *pdata = dev->platform_data; void __iomem *reg0 = priv->reg0; void __iomem *reg1 = priv->reg1; + static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT }; int i; u32 val; unsigned long flags; @@ -77,7 +104,16 @@ static int rcar_usb_phy_init(struct usb_phy *phy) /* (2) start USB-PHY internal PLL */ iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1)); - /* (3) USB module status check */ + /* (3) set USB-PHY in accord with the conditions of usage */ + if (reg1) { + u32 hsqctl1 = pdata->ferrite_bead ? 0x41 : 0; + u32 hsqctl2 = pdata->ferrite_bead ? 0x0d : 7; + + iowrite32(hsqctl1, reg1 + HSQCTL1); + iowrite32(hsqctl2, reg1 + HSQCTL2); + } + + /* (4) USB module status check */ for (i = 0; i < 1024; i++) { udelay(10); val = ioread32(reg0 + USBST); @@ -90,24 +126,24 @@ static int rcar_usb_phy_init(struct usb_phy *phy) goto phy_init_end; } - /* (4) USB-PHY reset clear */ + /* (5) USB-PHY reset clear */ iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1)); - /* set platform specific port settings */ - iowrite32(0x00000000, (reg0 + USBPCTRL0)); - - /* - * EHCI IP internal buffer setting - * EHCI IP internal buffer enable - * - * These are recommended value of a datasheet - * see [USB :: EHCI internal buffer setting] - */ - iowrite32(0x00ff0040, (reg0 + EIIBC1)); - iowrite32(0x00ff0040, (reg1 + EIIBC1)); - - iowrite32(0x00000001, (reg0 + EIIBC2)); - iowrite32(0x00000001, (reg1 + EIIBC2)); + /* Board specific port settings */ + val = 0; + if (pdata->port1_func) + val |= PORT1; + if (pdata->penc1) + val |= PENC; + for (i = 0; i < 3; i++) { + /* OVCn bits follow each other in the right order */ + if (pdata->ovc_pin[i].select_3_3v) + val |= OVC0 << i; + /* OVCn_ACT bits are spaced by irregular intervals */ + if (pdata->ovc_pin[i].active_high) + val |= ovcn_act[i]; + } + iowrite32(val, (reg0 + USBPCTRL0)); /* * Bus alignment settings @@ -134,10 +170,8 @@ static void rcar_usb_phy_shutdown(struct usb_phy *phy) spin_lock_irqsave(&priv->lock, flags); - if (priv->counter-- == 1) { /* last user */ - iowrite32(0x00000000, (reg0 + USBPCTRL0)); + if (priv->counter-- == 1) /* last user */ iowrite32(0x00000000, (reg0 + USBPCTRL1)); - } spin_unlock_irqrestore(&priv->lock, flags); } @@ -147,27 +181,29 @@ static int rcar_usb_phy_probe(struct platform_device *pdev) struct rcar_usb_phy_priv *priv; struct resource *res0, *res1; struct device *dev = &pdev->dev; - void __iomem *reg0, *reg1; + void __iomem *reg0, *reg1 = NULL; int ret; + if (!pdev->dev.platform_data) { + dev_err(dev, "No platform data\n"); + return -EINVAL; + } + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); - res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res0 || !res1) { + if (!res0) { dev_err(dev, "Not enough platform resources\n"); return -EINVAL; } - /* - * CAUTION - * - * Because this phy address is also mapped under OHCI/EHCI address area, - * this driver can't use devm_request_and_ioremap(dev, res) here - */ - reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0)); - reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1)); - if (!reg0 || !reg1) { - dev_err(dev, "ioremap error\n"); - return -ENOMEM; + reg0 = devm_ioremap_resource(dev, res0); + if (IS_ERR(reg0)) + return PTR_ERR(reg0); + + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res1) { + reg1 = devm_ioremap_resource(dev, res1); + if (IS_ERR(reg1)) + return PTR_ERR(reg1); } priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c index 45ffe036dac..9d5e273abcc 100644 --- a/drivers/usb/phy/phy-samsung-usb2.c +++ b/drivers/usb/phy/phy-samsung-usb2.c @@ -363,11 +363,6 @@ static int samsung_usb2phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c index 133f3d0c554..5a9efcbcb53 100644 --- a/drivers/usb/phy/phy-samsung-usb3.c +++ b/drivers/usb/phy/phy-samsung-usb3.c @@ -239,11 +239,6 @@ static int samsung_usb3phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 3b16118cbf6..40e7fd94646 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -43,7 +43,7 @@ #define DRIVER_NAME "ark3116" /* usb timeout of 1 second */ -#define ARK_TIMEOUT (1*HZ) +#define ARK_TIMEOUT 1000 static const struct usb_device_id id_table[] = { { USB_DEVICE(0x6547, 0x0232) }, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d341555d37d..082120198f8 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = { static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ }; @@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; @@ -229,6 +231,12 @@ static struct usb_serial_driver * const serial_drivers[] = { * Cypress serial helper functions *****************************************************************************/ +/* FRWD Dongle hidcom needs to skip reset and speed checks */ +static inline bool is_frwd(struct usb_device *dev) +{ + return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) && + (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD)); +} static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) { @@ -238,6 +246,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) if (unstable_bauds) return new_rate; + /* FRWD Dongle uses 115200 bps */ + if (is_frwd(port->serial->dev)) + return new_rate; + /* * The general purpose firmware for the Cypress M8 allows for * a maximum speed of 57600bps (I have no idea whether DeLorme @@ -448,7 +460,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port) return -ENOMEM; } - usb_reset_configuration(serial->dev); + /* Skip reset for FRWD device. It is a workaound: + device hangs if it receives SET_CONFIGURE in Configured + state. */ + if (!is_frwd(serial->dev)) + usb_reset_configuration(serial->dev); priv->cmd_ctrl = 0; priv->line_control = 0; diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 67cf6082688..b461311a2ae 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -24,6 +24,10 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* FRWD Dongle - a GPS sports watch */ +#define VENDOR_ID_FRWD 0x6737 +#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001 + /* Powercom UPS, chip CY7C63723 */ #define VENDOR_ID_POWERCOM 0x0d9f #define PRODUCT_ID_UPS 0x0002 diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 242b5776648..7260ec66034 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -189,6 +189,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) }, { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, @@ -924,8 +926,8 @@ static int ftdi_tiocmset(struct tty_struct *tty, static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); -static int ftdi_chars_in_buffer(struct tty_struct *tty); -static int ftdi_get_modem_status(struct tty_struct *tty, +static bool ftdi_tx_empty(struct usb_serial_port *port); +static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]); static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); @@ -961,7 +963,7 @@ static struct usb_serial_driver ftdi_sio_device = { .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, - .chars_in_buffer = ftdi_chars_in_buffer, + .tx_empty = ftdi_tx_empty, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -2056,27 +2058,18 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) } -static int ftdi_chars_in_buffer(struct tty_struct *tty) +static bool ftdi_tx_empty(struct usb_serial_port *port) { - struct usb_serial_port *port = tty->driver_data; - int chars; unsigned char buf[2]; int ret; - chars = usb_serial_generic_chars_in_buffer(tty); - if (chars) - goto out; - - /* Check if hardware buffer is empty. */ - ret = ftdi_get_modem_status(tty, buf); + ret = ftdi_get_modem_status(port, buf); if (ret == 2) { if (!(buf[1] & FTDI_RS_TEMT)) - chars = 1; + return false; } -out: - dev_dbg(&port->dev, "%s - %d\n", __func__, chars); - return chars; + return true; } /* old_termios contains the original termios settings and tty->termios contains @@ -2268,10 +2261,9 @@ no_c_cflag_changes: * Returns the number of status bytes retrieved (device dependant), or * negative error code. */ -static int ftdi_get_modem_status(struct tty_struct *tty, +static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]) { - struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned char *buf; int len; @@ -2336,7 +2328,7 @@ static int ftdi_tiocmget(struct tty_struct *tty) unsigned char buf[2]; int ret; - ret = ftdi_get_modem_status(tty, buf); + ret = ftdi_get_modem_status(port, buf); if (ret < 0) return ret; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 98528270c43..6dd79253205 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -772,6 +772,8 @@ */ #define NEWPORT_VID 0x104D #define NEWPORT_AGILIS_PID 0x3000 +#define NEWPORT_CONEX_CC_PID 0x3002 +#define NEWPORT_CONEX_AGP_PID 0x3006 /* Interbiometrics USB I/O Board */ /* Developed for Interbiometrics by Rudolf Gugler */ diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 297665fdd16..ba45170c78e 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -253,6 +253,37 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) } EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer); +void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int bps; + unsigned long period; + unsigned long expire; + + bps = tty_get_baud_rate(tty); + if (!bps) + bps = 9600; /* B0 */ + /* + * Use a poll-period of roughly the time it takes to send one + * character or at least one jiffy. + */ + period = max_t(unsigned long, (10 * HZ / bps), 1); + period = min_t(unsigned long, period, timeout); + + dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n", + __func__, jiffies_to_msecs(timeout), + jiffies_to_msecs(period)); + expire = jiffies + timeout; + while (!port->serial->type->tx_empty(port)) { + schedule_timeout_interruptible(period); + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } +} +EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent); + static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, int index, gfp_t mem_flags) { diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 158bf4bc29c..1be6ba7bee2 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2019,8 +2019,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; - int ret; - if (edge_port == NULL) return 0; @@ -2028,16 +2026,22 @@ static int edge_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - if (!chars) { - ret = tx_active(edge_port); - if (ret > 0) - chars = ret; - } - dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } +static bool edge_tx_empty(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int ret; + + ret = tx_active(edge_port); + if (ret > 0) + return false; + + return true; +} + static void edge_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -2557,6 +2561,7 @@ static struct usb_serial_driver edgeport_1port_device = { .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, + .tx_empty = edge_tx_empty, .break_ctl = edge_break, .read_int_callback = edge_interrupt_callback, .read_bulk_callback = edge_bulk_in_callback, @@ -2589,6 +2594,7 @@ static struct usb_serial_driver edgeport_2port_device = { .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, + .tx_empty = edge_tx_empty, .break_ctl = edge_break, .read_int_callback = edge_interrupt_callback, .read_bulk_callback = edge_bulk_in_callback, diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 9d74c278b7b..790673e5faa 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -287,7 +287,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); @@ -307,7 +307,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index eb30d7b01f3..3549d073df2 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1548,7 +1548,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; - int outcont_urb; struct urb *this_urb; int device_port, err; @@ -1559,7 +1558,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, d_details = s_priv->device_details; device_port = port->number - port->serial->minor; - outcont_urb = d_details->outcont_endpoints[port->number]; this_urb = p_priv->outcont_urb; dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); @@ -1685,14 +1683,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); -#if 0 - else { - dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__ - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); - } -#endif - return 0; } diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index cc0e54345df..f27c621a929 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -40,7 +40,7 @@ #define DRIVER_DESC "Moschip USB Serial Driver" /* default urb timeout */ -#define MOS_WDR_TIMEOUT (HZ * 5) +#define MOS_WDR_TIMEOUT 5000 #define MOS_MAX_PORT 0x02 #define MOS_WRITE 0x0E @@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, __u8 requesttype = (__u8)0xc0; __u16 index = get_reg_index(reg); __u16 value = get_reg_value(reg, serial_portnum); - int status = usb_control_msg(usbdev, pipe, request, requesttype, value, - index, data, 1, MOS_WDR_TIMEOUT); - if (status < 0) + u8 *buf; + int status; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + status = usb_control_msg(usbdev, pipe, request, requesttype, value, + index, buf, 1, MOS_WDR_TIMEOUT); + if (status == 1) + *data = *buf; + else if (status < 0) dev_err(&usbdev->dev, "mos7720: usb_control_msg() failed: %d", status); + kfree(buf); + return status; } @@ -1618,7 +1629,7 @@ static void change_port_settings(struct tty_struct *tty, mos7720_port->shadowMCR |= (UART_MCR_XONANY); /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ - if (port->number) + if (port_number) write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01); else write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02); @@ -1927,7 +1938,7 @@ static int mos7720_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); + (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); @@ -1970,7 +1981,7 @@ static void mos7720_release(struct usb_serial *serial) /* wait for synchronous usb calls to return */ if (mos_parport->msg_pending) wait_for_completion_timeout(&mos_parport->syncmsg_compl, - MOS_WDR_TIMEOUT); + msecs_to_jiffies(MOS_WDR_TIMEOUT)); parport_remove_port(mos_parport->pp); usb_set_serial_data(serial, NULL); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index a0d5ea54598..7e998081e1c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2142,13 +2142,21 @@ static int mos7840_ioctl(struct tty_struct *tty, static int mos7810_check(struct usb_serial *serial) { int i, pass_count = 0; + u8 *buf; __u16 data = 0, mcr_data = 0; __u16 test_pattern = 0x55AA; + int res; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return 0; /* failed to identify 7810 */ /* Store MCR setting */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER, - &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + mcr_data = *buf; for (i = 0; i < 16; i++) { /* Send the 1-bit test pattern out to MCS7810 test pin */ @@ -2158,9 +2166,12 @@ static int mos7810_check(struct usb_serial *serial) MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); /* Read the test pattern back */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + res = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + data = *buf; /* If this is a MCS7810 device, both test patterns must match */ if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001) @@ -2174,6 +2185,8 @@ static int mos7810_check(struct usb_serial *serial) MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); + kfree(buf); + if (pass_count == 16) return 1; @@ -2183,11 +2196,17 @@ static int mos7810_check(struct usb_serial *serial) static int mos7840_calc_num_ports(struct usb_serial *serial) { __u16 data = 0x00; + u8 *buf; int mos7840_num_ports; - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (buf) { + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + data = *buf; + kfree(buf); + } if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 734372846ab..bd4323ddae1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -196,6 +196,7 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */ #define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ +#define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */ #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da @@ -249,13 +250,7 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_MF622 0x0001 #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 -#define ZTE_PRODUCT_CDMA_TECH 0xfffe -#define ZTE_PRODUCT_AC8710 0xfff1 -#define ZTE_PRODUCT_AC2726 0xfff5 -#define ZTE_PRODUCT_AC8710T 0xffff #define ZTE_PRODUCT_MC2718 0xffe8 -#define ZTE_PRODUCT_AD3812 0xffeb -#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -341,8 +336,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_EU3_E 0x0051 #define CINTERION_PRODUCT_EU3_P 0x0052 #define CINTERION_PRODUCT_PH8 0x0053 -#define CINTERION_PRODUCT_AH6 0x0055 -#define CINTERION_PRODUCT_PLS8 0x0060 +#define CINTERION_PRODUCT_AHXX 0x0055 +#define CINTERION_PRODUCT_PLXX 0x0060 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -494,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; -static const struct option_blacklist_info zte_ad3812_z_blacklist = { - .sendsetup = BIT(0) | BIT(1) | BIT(2), -}; - static const struct option_blacklist_info zte_mc2718_z_blacklist = { .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), }; -static const struct option_blacklist_info zte_mc2716_z_blacklist = { - .sendsetup = BIT(1) | BIT(2) | BIT(3), -}; - static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -592,6 +579,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */ + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, @@ -771,6 +760,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, @@ -795,7 +785,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, - { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ @@ -966,6 +955,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), @@ -1195,16 +1186,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, @@ -1264,8 +1248,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 59b32b78212..bd794b43898 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ + {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */ /* non Gobi Qualcomm serial devices */ {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */ diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index cac47aef291..c92c5ed4e58 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -101,6 +101,7 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count); static int ti_write_room(struct tty_struct *tty); static int ti_chars_in_buffer(struct tty_struct *tty); +static bool ti_tx_empty(struct usb_serial_port *port); static void ti_throttle(struct tty_struct *tty); static void ti_unthrottle(struct tty_struct *tty); static int ti_ioctl(struct tty_struct *tty, @@ -222,6 +223,7 @@ static struct usb_serial_driver ti_1port_device = { .write = ti_write, .write_room = ti_write_room, .chars_in_buffer = ti_chars_in_buffer, + .tx_empty = ti_tx_empty, .throttle = ti_throttle, .unthrottle = ti_unthrottle, .ioctl = ti_ioctl, @@ -253,6 +255,7 @@ static struct usb_serial_driver ti_2port_device = { .write = ti_write, .write_room = ti_write_room, .chars_in_buffer = ti_chars_in_buffer, + .tx_empty = ti_tx_empty, .throttle = ti_throttle, .unthrottle = ti_unthrottle, .ioctl = ti_ioctl, @@ -684,8 +687,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty) struct ti_port *tport = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; - int ret; - u8 lsr; if (tport == NULL) return 0; @@ -694,16 +695,22 @@ static int ti_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); - if (!chars) { - ret = ti_get_lsr(tport, &lsr); - if (!ret && !(lsr & TI_LSR_TX_EMPTY)) - chars = 1; - } - dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } +static bool ti_tx_empty(struct usb_serial_port *port) +{ + struct ti_port *tport = usb_get_serial_port_data(port); + int ret; + u8 lsr; + + ret = ti_get_lsr(tport, &lsr); + if (!ret && !(lsr & TI_LSR_TX_EMPTY)) + return false; + + return true; +} static void ti_throttle(struct tty_struct *tty) { diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cf75beb1251..5f6b1ff9d29 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -359,20 +359,29 @@ static int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; - int count = 0; dev_dbg(tty->dev, "%s\n", __func__); - mutex_lock(&serial->disc_mutex); - /* if the device was unplugged then any remaining characters - fell out of the connector ;) */ if (serial->disconnected) - count = 0; - else - count = serial->type->chars_in_buffer(tty); - mutex_unlock(&serial->disc_mutex); + return 0; - return count; + return serial->type->chars_in_buffer(tty); +} + +static void serial_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (!port->serial->type->wait_until_sent) + return; + + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + port->serial->type->wait_until_sent(tty, timeout); + mutex_unlock(&serial->disc_mutex); } static void serial_throttle(struct tty_struct *tty) @@ -399,7 +408,7 @@ static int serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - int retval = -ENODEV; + int retval = -ENOIOCTLCMD; dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd); @@ -411,8 +420,6 @@ static int serial_ioctl(struct tty_struct *tty, default: if (port->serial->type->ioctl) retval = port->serial->type->ioctl(tty, cmd, arg); - else - retval = -ENOIOCTLCMD; } return retval; @@ -1191,6 +1198,7 @@ static const struct tty_operations serial_ops = { .unthrottle = serial_unthrottle, .break_ctl = serial_break, .chars_in_buffer = serial_chars_in_buffer, + .wait_until_sent = serial_wait_until_sent, .tiocmget = serial_tiocmget, .tiocmset = serial_tiocmset, .get_icount = serial_get_icount, @@ -1316,6 +1324,8 @@ static void usb_serial_operations_init(struct usb_serial_driver *device) set_to_generic_if_null(device, close); set_to_generic_if_null(device, write_room); set_to_generic_if_null(device, chars_in_buffer); + if (device->tx_empty) + set_to_generic_if_null(device, wait_until_sent); set_to_generic_if_null(device, read_bulk_callback); set_to_generic_if_null(device, write_bulk_callback); set_to_generic_if_null(device, process_read_urb); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 7573ec8a084..9910aa2edf4 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -560,10 +560,19 @@ static int treo_attach(struct usb_serial *serial) */ #define COPY_PORT(dest, src) \ do { \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \ + dest->read_urbs[i] = src->read_urbs[i]; \ + dest->read_urbs[i]->context = dest; \ + dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \ + } \ dest->read_urb = src->read_urb; \ dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ dest->bulk_in_buffer = src->bulk_in_buffer; \ + dest->bulk_in_size = src->bulk_in_size; \ dest->interrupt_in_urb = src->interrupt_in_urb; \ + dest->interrupt_in_urb->context = dest; \ dest->interrupt_in_endpointAddress = \ src->interrupt_in_endpointAddress;\ dest->interrupt_in_buffer = src->interrupt_in_buffer; \ diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b9fca3586d7..347caad47a1 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty) struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; - port_settings.port = port->number + 1; + port_settings.port = port->number - port->serial->minor + 1; /* get the byte size */ switch (cflag & CSIZE) { diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index 39ee7373b4e..fca4c752a4e 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, int len; unsigned char *buf; - if (port->number != 0) - return -ENODEV; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -53,7 +50,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0001, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st cmd and recieve data */ @@ -65,7 +62,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 3 cmd */ @@ -84,7 +81,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -95,7 +92,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 5 cmd */ @@ -107,7 +104,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 6 cmd */ @@ -126,7 +123,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); kfree(buf); @@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) int len; unsigned char *buf; - if (port->number != 0) - return; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return; @@ -178,7 +172,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0002, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ @@ -186,7 +180,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 3st cmd and recieve data */ @@ -198,7 +192,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -217,7 +211,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 5 cmd */ @@ -228,7 +222,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 6 cmd */ @@ -240,7 +234,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 7 cmd */ @@ -259,7 +253,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 8 cmd */ @@ -270,7 +264,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); kfree(buf); @@ -279,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) } static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */ - { USB_DEVICE(0x19d2, 0xfffe) }, - { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */ + /* AC8710, AC8710T */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) }, + /* AC8700 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) }, + /* MG880 */ + { USB_DEVICE(0x19d2, 0xfffd) }, + { USB_DEVICE(0x19d2, 0xfffc) }, + { USB_DEVICE(0x19d2, 0xfffb) }, + /* AC2726, AC8710_V3 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xfff6) }, + { USB_DEVICE(0x19d2, 0xfff7) }, + { USB_DEVICE(0x19d2, 0xfff8) }, + { USB_DEVICE(0x19d2, 0xfff9) }, + { USB_DEVICE(0x19d2, 0xffee) }, + /* AC2716, MC2716 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) }, + /* AD3812 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xffec) }, { USB_DEVICE(0x05C6, 0x3197) }, { USB_DEVICE(0x05C6, 0x6000) }, + { USB_DEVICE(0x05C6, 0x9008) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 8623577bbbe..281be56d564 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -105,8 +105,9 @@ struct rts51x_chip { int status_len; u32 flag; -#ifdef CONFIG_REALTEK_AUTOPM struct us_data *us; + +#ifdef CONFIG_REALTEK_AUTOPM struct timer_list rts51x_suspend_timer; unsigned long timer_expires; int pwr_state; @@ -988,6 +989,7 @@ static int init_realtek_cr(struct us_data *us) us->extra = chip; us->extra_destructor = realtek_cr_destructor; us->max_lun = chip->max_lun = rts51x_get_max_lun(us); + chip->us = us; usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun); @@ -1010,10 +1012,8 @@ static int init_realtek_cr(struct us_data *us) SET_AUTO_DELINK(chip); } #ifdef CONFIG_REALTEK_AUTOPM - if (ss_en) { - chip->us = us; + if (ss_en) realtek_cr_autosuspend_setup(us); - } #endif usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag); |