diff options
Diffstat (limited to 'drivers/usb')
66 files changed, 738 insertions, 436 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index d6ede989ff2..4ab49d4eebf 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1607,6 +1607,7 @@ static const struct usb_device_id acm_ids[] = { { NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */ { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */ { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */ + { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */ { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */ /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 6ee4451bfe2..47085e5879a 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -342,7 +342,7 @@ static ssize_t wdm_write goto outnp; } - if (!file->f_flags && O_NONBLOCK) + if (!(file->f_flags & O_NONBLOCK)) r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE, &desc->flags)); else diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index bcc24779ba0..18d02e32a3d 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -123,9 +123,9 @@ config USB_OTG config USB_OTG_WHITELIST bool "Rely on OTG Targeted Peripherals List" - depends on USB_OTG || EMBEDDED + depends on USB_OTG || EXPERT default y if USB_OTG - default n if EMBEDDED + default n if EXPERT help If you say Y here, the "otg_whitelist.h" file will be used as a product whitelist, so USB peripherals not listed there will be @@ -141,7 +141,7 @@ config USB_OTG_WHITELIST config USB_OTG_BLACKLIST_HUB bool "Disable external hubs" - depends on USB_OTG || EMBEDDED + depends on USB_OTG || EXPERT help If you say Y here, then Linux will refuse to enumerate external hubs. OTG hosts are allowed to reduce hardware diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index 9da25056302..df502a98d0d 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -192,12 +192,12 @@ int usb_create_ep_devs(struct device *parent, ep_dev->dev.parent = parent; ep_dev->dev.release = ep_device_release; dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress); - device_enable_async_suspend(&ep_dev->dev); retval = device_register(&ep_dev->dev); if (retval) goto error_register; + device_enable_async_suspend(&ep_dev->dev); endpoint->ep_dev = ep_dev; return retval; diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index b55d46070a2..f71e8e307e0 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -405,7 +405,12 @@ static int suspend_common(struct device *dev, bool do_wakeup) return retval; } - synchronize_irq(pci_dev->irq); + /* If MSI-X is enabled, the driver will have synchronized all vectors + * in pci_suspend(). If MSI or legacy PCI is enabled, that will be + * synchronized here. + */ + if (!hcd->msix_enabled) + synchronize_irq(pci_dev->irq); /* Downstream ports from this root hub should already be quiesced, so * there will be no DMA activity. Now we can shut down the upstream diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6a95017fa62..e935f71d7a3 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1955,7 +1955,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) dev_dbg(&rhdev->dev, "usb %s%s\n", (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume"); - clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); if (!hcd->driver->bus_resume) return -ENOENT; if (hcd->state == HC_STATE_RUNNING) @@ -1963,6 +1962,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) hcd->state = HC_STATE_RESUMING; status = hcd->driver->bus_resume(hcd); + clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); if (status == 0) { /* TRSMRCY = 10 msec */ msleep(10); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b98efae6a1c..d041c6826e4 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -676,6 +676,8 @@ static void hub_init_func3(struct work_struct *ws); static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) { struct usb_device *hdev = hub->hdev; + struct usb_hcd *hcd; + int ret; int port1; int status; bool need_debounce_delay = false; @@ -714,6 +716,25 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) usb_autopm_get_interface_no_resume( to_usb_interface(hub->intfdev)); return; /* Continues at init2: below */ + } else if (type == HUB_RESET_RESUME) { + /* The internal host controller state for the hub device + * may be gone after a host power loss on system resume. + * Update the device's info so the HW knows it's a hub. + */ + hcd = bus_to_hcd(hdev->bus); + if (hcd->driver->update_hub_device) { + ret = hcd->driver->update_hub_device(hcd, hdev, + &hub->tt, GFP_NOIO); + if (ret < 0) { + dev_err(hub->intfdev, "Host not " + "accepting hub info " + "update.\n"); + dev_err(hub->intfdev, "LS/FS devices " + "and hubs may not work " + "under this hub\n."); + } + } + hub_power_on(hub, true); } else { hub_power_on(hub, true); } @@ -2732,6 +2753,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, udev->ttport = hdev->ttport; } else if (udev->speed != USB_SPEED_HIGH && hdev->speed == USB_SPEED_HIGH) { + if (!hub->tt.hub) { + dev_err(&udev->dev, "parent hub has no TT\n"); + retval = -EINVAL; + goto fail; + } udev->tt = &hub->tt; udev->ttport = port1; } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 1dc9739277b..d50099675f2 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -509,7 +509,7 @@ config USB_LANGWELL select USB_GADGET_SELECTED config USB_GADGET_EG20T - boolean "Intel EG20T(Topcliff) USB Device controller" + boolean "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC" depends on PCI select USB_GADGET_DUALSPEED help @@ -525,6 +525,11 @@ config USB_GADGET_EG20T This driver dose not support interrupt transfer or isochronous transfer modes. + This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is + for IVI(In-Vehicle Infotainment) use. + ML7213 is companion chip for Intel Atom E6xx series. + ML7213 is completely compatible for Intel EG20T PCH. + config USB_EG20T tristate depends on USB_GADGET_EG20T @@ -541,6 +546,8 @@ config USB_GADGET_CI13XXX_MSM ci13xxx_udc core. This driver depends on OTG driver for PHY initialization, clock management, powering up VBUS, and power management. + This driver is not supported on boards like trout which + has an external PHY. Say "y" to link the driver statically, or "m" to build a dynamically linked module called "ci13xxx_msm" and force all diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 31656a2b4ab..a1c67ae1572 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -76,10 +76,21 @@ static DEFINE_SPINLOCK(udc_lock); /* control endpoint description */ static const struct usb_endpoint_descriptor -ctrl_endpt_desc = { +ctrl_endpt_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), +}; + +static const struct usb_endpoint_descriptor +ctrl_endpt_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_CONTROL, .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), }; @@ -265,10 +276,10 @@ static int hw_device_init(void __iomem *base) hw_bank.size /= sizeof(u32); reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN); - if (reg == 0 || reg > ENDPT_MAX) - return -ENODEV; + hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ - hw_ep_max = reg; /* cache hw ENDPT_MAX */ + if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX) + return -ENODEV; /* setup lock mode ? */ @@ -1197,16 +1208,17 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, } spin_lock_irqsave(udc->lock, flags); - for (i = 0; i < hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < hw_ep_max/2; i++) { + struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i]; + struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2]; n += scnprintf(buf + n, PAGE_SIZE - n, "EP=%02i: RX=%08X TX=%08X\n", - i, (u32)mEp->qh[RX].dma, (u32)mEp->qh[TX].dma); + i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) { n += scnprintf(buf + n, PAGE_SIZE - n, " %04X: %08X %08X\n", j, - *((u32 *)mEp->qh[RX].ptr + j), - *((u32 *)mEp->qh[TX].ptr + j)); + *((u32 *)mEpRx->qh.ptr + j), + *((u32 *)mEpTx->qh.ptr + j)); } } spin_unlock_irqrestore(udc->lock, flags); @@ -1293,7 +1305,7 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr, unsigned long flags; struct list_head *ptr = NULL; struct ci13xxx_req *req = NULL; - unsigned i, j, k, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); + unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); dbg_trace("[%s] %p\n", __func__, buf); if (attr == NULL || buf == NULL) { @@ -1303,22 +1315,20 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr, spin_lock_irqsave(udc->lock, flags); for (i = 0; i < hw_ep_max; i++) - for (k = RX; k <= TX; k++) - list_for_each(ptr, &udc->ci13xxx_ep[i].qh[k].queue) - { - req = list_entry(ptr, - struct ci13xxx_req, queue); + list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue) + { + req = list_entry(ptr, struct ci13xxx_req, queue); + + n += scnprintf(buf + n, PAGE_SIZE - n, + "EP=%02i: TD=%08X %s\n", + i % hw_ep_max/2, (u32)req->dma, + ((i < hw_ep_max/2) ? "RX" : "TX")); + for (j = 0; j < qSize; j++) n += scnprintf(buf + n, PAGE_SIZE - n, - "EP=%02i: TD=%08X %s\n", - i, (u32)req->dma, - ((k == RX) ? "RX" : "TX")); - - for (j = 0; j < qSize; j++) - n += scnprintf(buf + n, PAGE_SIZE - n, - " %04X: %08X\n", j, - *((u32 *)req->ptr + j)); - } + " %04X: %08X\n", j, + *((u32 *)req->ptr + j)); + } spin_unlock_irqrestore(udc->lock, flags); return n; @@ -1467,12 +1477,12 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) * At this point it's guaranteed exclusive access to qhead * (endpt is not primed) so it's no need to use tripwire */ - mEp->qh[mEp->dir].ptr->td.next = mReq->dma; /* TERMINATE = 0 */ - mEp->qh[mEp->dir].ptr->td.token &= ~TD_STATUS; /* clear status */ + mEp->qh.ptr->td.next = mReq->dma; /* TERMINATE = 0 */ + mEp->qh.ptr->td.token &= ~TD_STATUS; /* clear status */ if (mReq->req.zero == 0) - mEp->qh[mEp->dir].ptr->cap |= QH_ZLT; + mEp->qh.ptr->cap |= QH_ZLT; else - mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT; + mEp->qh.ptr->cap &= ~QH_ZLT; wmb(); /* synchronize before ep prime */ @@ -1542,11 +1552,11 @@ __acquires(mEp->lock) hw_ep_flush(mEp->num, mEp->dir); - while (!list_empty(&mEp->qh[mEp->dir].queue)) { + while (!list_empty(&mEp->qh.queue)) { /* pop oldest request */ struct ci13xxx_req *mReq = \ - list_entry(mEp->qh[mEp->dir].queue.next, + list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); list_del_init(&mReq->queue); mReq->req.status = -ESHUTDOWN; @@ -1571,8 +1581,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) { struct usb_ep *ep; struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); - struct ci13xxx_ep *mEp = container_of(gadget->ep0, - struct ci13xxx_ep, ep); trace("%p", gadget); @@ -1583,7 +1591,8 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) gadget_for_each_ep(ep, gadget) { usb_ep_fifo_flush(ep); } - usb_ep_fifo_flush(gadget->ep0); + usb_ep_fifo_flush(&udc->ep0out.ep); + usb_ep_fifo_flush(&udc->ep0in.ep); udc->driver->disconnect(gadget); @@ -1591,11 +1600,12 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) gadget_for_each_ep(ep, gadget) { usb_ep_disable(ep); } - usb_ep_disable(gadget->ep0); + usb_ep_disable(&udc->ep0out.ep); + usb_ep_disable(&udc->ep0in.ep); - if (mEp->status != NULL) { - usb_ep_free_request(gadget->ep0, mEp->status); - mEp->status = NULL; + if (udc->status != NULL) { + usb_ep_free_request(&udc->ep0in.ep, udc->status); + udc->status = NULL; } return 0; @@ -1614,7 +1624,6 @@ static void isr_reset_handler(struct ci13xxx *udc) __releases(udc->lock) __acquires(udc->lock) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[0]; int retval; trace("%p", udc); @@ -1635,11 +1644,15 @@ __acquires(udc->lock) if (retval) goto done; - retval = usb_ep_enable(&mEp->ep, &ctrl_endpt_desc); + retval = usb_ep_enable(&udc->ep0out.ep, &ctrl_endpt_out_desc); + if (retval) + goto done; + + retval = usb_ep_enable(&udc->ep0in.ep, &ctrl_endpt_in_desc); if (!retval) { - mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_ATOMIC); - if (mEp->status == NULL) { - usb_ep_disable(&mEp->ep); + udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC); + if (udc->status == NULL) { + usb_ep_disable(&udc->ep0out.ep); retval = -ENOMEM; } } @@ -1672,16 +1685,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) /** * isr_get_status_response: get_status request response - * @ep: endpoint + * @udc: udc struct * @setup: setup request packet * * This function returns an error code */ -static int isr_get_status_response(struct ci13xxx_ep *mEp, +static int isr_get_status_response(struct ci13xxx *udc, struct usb_ctrlrequest *setup) __releases(mEp->lock) __acquires(mEp->lock) { + struct ci13xxx_ep *mEp = &udc->ep0in; struct usb_request *req = NULL; gfp_t gfp_flags = GFP_ATOMIC; int dir, num, retval; @@ -1736,27 +1750,23 @@ __acquires(mEp->lock) /** * isr_setup_status_phase: queues the status phase of a setup transation - * @mEp: endpoint + * @udc: udc struct * * This function returns an error code */ -static int isr_setup_status_phase(struct ci13xxx_ep *mEp) +static int isr_setup_status_phase(struct ci13xxx *udc) __releases(mEp->lock) __acquires(mEp->lock) { int retval; + struct ci13xxx_ep *mEp; - trace("%p", mEp); - - /* mEp is always valid & configured */ - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->dir = (mEp->dir == TX) ? RX : TX; + trace("%p", udc); - mEp->status->no_interrupt = 1; + mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in; spin_unlock(mEp->lock); - retval = usb_ep_queue(&mEp->ep, mEp->status, GFP_ATOMIC); + retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC); spin_lock(mEp->lock); return retval; @@ -1778,11 +1788,11 @@ __acquires(mEp->lock) trace("%p", mEp); - if (list_empty(&mEp->qh[mEp->dir].queue)) + if (list_empty(&mEp->qh.queue)) return -EINVAL; /* pop oldest request */ - mReq = list_entry(mEp->qh[mEp->dir].queue.next, + mReq = list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); list_del_init(&mReq->queue); @@ -1794,10 +1804,10 @@ __acquires(mEp->lock) dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); - if (!list_empty(&mEp->qh[mEp->dir].queue)) { + if (!list_empty(&mEp->qh.queue)) { struct ci13xxx_req* mReqEnq; - mReqEnq = list_entry(mEp->qh[mEp->dir].queue.next, + mReqEnq = list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); _hardware_enqueue(mEp, mReqEnq); } @@ -1836,16 +1846,14 @@ __acquires(udc->lock) int type, num, err = -EINVAL; struct usb_ctrlrequest req; - if (mEp->desc == NULL) continue; /* not configured */ - if ((mEp->dir == RX && hw_test_and_clear_complete(i)) || - (mEp->dir == TX && hw_test_and_clear_complete(i + 16))) { + if (hw_test_and_clear_complete(i)) { err = isr_tr_complete_low(mEp); if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (err > 0) /* needs status phase */ - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); if (err < 0) { dbg_event(_usb_addr(mEp), "ERROR", err); @@ -1866,15 +1874,22 @@ __acquires(udc->lock) continue; } + /* + * Flush data and handshake transactions of previous + * setup packet. + */ + _ep_nuke(&udc->ep0out); + _ep_nuke(&udc->ep0in); + /* read_setup_packet */ do { hw_test_and_set_setup_guard(); - memcpy(&req, &mEp->qh[RX].ptr->setup, sizeof(req)); + memcpy(&req, &mEp->qh.ptr->setup, sizeof(req)); } while (!hw_test_and_clear_setup_guard()); type = req.bRequestType; - mEp->dir = (type & USB_DIR_IN) ? TX : RX; + udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX; dbg_setup(_usb_addr(mEp), &req); @@ -1895,7 +1910,7 @@ __acquires(udc->lock) if (err) break; } - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); break; case USB_REQ_GET_STATUS: if (type != (USB_DIR_IN|USB_RECIP_DEVICE) && @@ -1905,7 +1920,7 @@ __acquires(udc->lock) if (le16_to_cpu(req.wLength) != 2 || le16_to_cpu(req.wValue) != 0) break; - err = isr_get_status_response(mEp, &req); + err = isr_get_status_response(udc, &req); break; case USB_REQ_SET_ADDRESS: if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) @@ -1916,7 +1931,7 @@ __acquires(udc->lock) err = hw_usb_set_address((u8)le16_to_cpu(req.wValue)); if (err) break; - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); break; case USB_REQ_SET_FEATURE: if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) && @@ -1932,12 +1947,12 @@ __acquires(udc->lock) spin_lock(udc->lock); if (err) break; - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); break; default: delegate: if (req.wLength == 0) /* no data phase */ - mEp->dir = TX; + udc->ep0_dir = TX; spin_unlock(udc->lock); err = udc->driver->setup(&udc->gadget, &req); @@ -1968,7 +1983,7 @@ static int ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) { struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - int direction, retval = 0; + int retval = 0; unsigned long flags; trace("%p, %p", ep, desc); @@ -1982,7 +1997,7 @@ static int ep_enable(struct usb_ep *ep, mEp->desc = desc; - if (!list_empty(&mEp->qh[mEp->dir].queue)) + if (!list_empty(&mEp->qh.queue)) warn("enabling a non-empty endpoint!"); mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX; @@ -1991,29 +2006,22 @@ static int ep_enable(struct usb_ep *ep, mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize); - direction = mEp->dir; - do { - dbg_event(_usb_addr(mEp), "ENABLE", 0); + dbg_event(_usb_addr(mEp), "ENABLE", 0); - mEp->qh[mEp->dir].ptr->cap = 0; + mEp->qh.ptr->cap = 0; - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->qh[mEp->dir].ptr->cap |= QH_IOS; - else if (mEp->type == USB_ENDPOINT_XFER_ISOC) - mEp->qh[mEp->dir].ptr->cap &= ~QH_MULT; - else - mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT; - - mEp->qh[mEp->dir].ptr->cap |= - (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; - mEp->qh[mEp->dir].ptr->td.next |= TD_TERMINATE; /* needed? */ - - retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); + if (mEp->type == USB_ENDPOINT_XFER_CONTROL) + mEp->qh.ptr->cap |= QH_IOS; + else if (mEp->type == USB_ENDPOINT_XFER_ISOC) + mEp->qh.ptr->cap &= ~QH_MULT; + else + mEp->qh.ptr->cap &= ~QH_ZLT; - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->dir = (mEp->dir == TX) ? RX : TX; + mEp->qh.ptr->cap |= + (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; + mEp->qh.ptr->td.next |= TD_TERMINATE; /* needed? */ - } while (mEp->dir != direction); + retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); spin_unlock_irqrestore(mEp->lock, flags); return retval; @@ -2146,7 +2154,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, spin_lock_irqsave(mEp->lock, flags); if (mEp->type == USB_ENDPOINT_XFER_CONTROL && - !list_empty(&mEp->qh[mEp->dir].queue)) { + !list_empty(&mEp->qh.queue)) { _ep_nuke(mEp); retval = -EOVERFLOW; warn("endpoint ctrl %X nuked", _usb_addr(mEp)); @@ -2170,9 +2178,9 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, /* push request */ mReq->req.status = -EINPROGRESS; mReq->req.actual = 0; - list_add_tail(&mReq->queue, &mEp->qh[mEp->dir].queue); + list_add_tail(&mReq->queue, &mEp->qh.queue); - if (list_is_singular(&mEp->qh[mEp->dir].queue)) + if (list_is_singular(&mEp->qh.queue)) retval = _hardware_enqueue(mEp, mReq); if (retval == -EALREADY) { @@ -2199,7 +2207,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) trace("%p, %p", ep, req); if (ep == NULL || req == NULL || mEp->desc == NULL || - list_empty(&mReq->queue) || list_empty(&mEp->qh[mEp->dir].queue)) + list_empty(&mReq->queue) || list_empty(&mEp->qh.queue)) return -EINVAL; spin_lock_irqsave(mEp->lock, flags); @@ -2244,7 +2252,7 @@ static int ep_set_halt(struct usb_ep *ep, int value) #ifndef STALL_IN /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */ if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX && - !list_empty(&mEp->qh[mEp->dir].queue)) { + !list_empty(&mEp->qh.queue)) { spin_unlock_irqrestore(mEp->lock, flags); return -EAGAIN; } @@ -2355,7 +2363,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) if (is_active) { pm_runtime_get_sync(&_gadget->dev); hw_device_reset(udc); - hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma); + hw_device_state(udc->ep0out.qh.dma); } else { hw_device_state(0); if (udc->udc_driver->notify_event) @@ -2390,7 +2398,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *)) { struct ci13xxx *udc = _udc; - unsigned long i, k, flags; + unsigned long flags; + int i, j; int retval = -ENOMEM; trace("%p", driver); @@ -2427,45 +2436,46 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, info("hw_ep_max = %d", hw_ep_max); - udc->driver = driver; udc->gadget.dev.driver = NULL; retval = 0; - for (i = 0; i < hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < hw_ep_max/2; i++) { + for (j = RX; j <= TX; j++) { + int k = i + j * hw_ep_max/2; + struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k]; - scnprintf(mEp->name, sizeof(mEp->name), "ep%i", (int)i); + scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i, + (j == TX) ? "in" : "out"); - mEp->lock = udc->lock; - mEp->device = &udc->gadget.dev; - mEp->td_pool = udc->td_pool; + mEp->lock = udc->lock; + mEp->device = &udc->gadget.dev; + mEp->td_pool = udc->td_pool; - mEp->ep.name = mEp->name; - mEp->ep.ops = &usb_ep_ops; - mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; + mEp->ep.name = mEp->name; + mEp->ep.ops = &usb_ep_ops; + mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; - /* this allocation cannot be random */ - for (k = RX; k <= TX; k++) { - INIT_LIST_HEAD(&mEp->qh[k].queue); + INIT_LIST_HEAD(&mEp->qh.queue); spin_unlock_irqrestore(udc->lock, flags); - mEp->qh[k].ptr = dma_pool_alloc(udc->qh_pool, - GFP_KERNEL, - &mEp->qh[k].dma); + mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL, + &mEp->qh.dma); spin_lock_irqsave(udc->lock, flags); - if (mEp->qh[k].ptr == NULL) + if (mEp->qh.ptr == NULL) retval = -ENOMEM; else - memset(mEp->qh[k].ptr, 0, - sizeof(*mEp->qh[k].ptr)); - } - if (i == 0) - udc->gadget.ep0 = &mEp->ep; - else + memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr)); + + /* skip ep0 out and in endpoints */ + if (i == 0) + continue; + list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); + } } if (retval) goto done; + udc->gadget.ep0 = &udc->ep0in.ep; /* bind gadget */ driver->driver.bus = NULL; udc->gadget.dev.driver = &driver->driver; @@ -2479,6 +2489,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, goto done; } + udc->driver = driver; pm_runtime_get_sync(&udc->gadget.dev); if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) { if (udc->vbus_active) { @@ -2490,14 +2501,12 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, } } - retval = hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma); + retval = hw_device_state(udc->ep0out.qh.dma); if (retval) pm_runtime_put_sync(&udc->gadget.dev); done: spin_unlock_irqrestore(udc->lock, flags); - if (retval) - usb_gadget_unregister_driver(driver); return retval; } EXPORT_SYMBOL(usb_gadget_probe_driver); @@ -2510,7 +2519,7 @@ EXPORT_SYMBOL(usb_gadget_probe_driver); int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { struct ci13xxx *udc = _udc; - unsigned long i, k, flags; + unsigned long i, flags; trace("%p", driver); @@ -2546,17 +2555,14 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) for (i = 0; i < hw_ep_max; i++) { struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; - if (i == 0) - udc->gadget.ep0 = NULL; - else if (!list_empty(&mEp->ep.ep_list)) + if (!list_empty(&mEp->ep.ep_list)) list_del_init(&mEp->ep.ep_list); - for (k = RX; k <= TX; k++) - if (mEp->qh[k].ptr != NULL) - dma_pool_free(udc->qh_pool, - mEp->qh[k].ptr, mEp->qh[k].dma); + if (mEp->qh.ptr != NULL) + dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma); } + udc->gadget.ep0 = NULL; udc->driver = NULL; spin_unlock_irqrestore(udc->lock, flags); diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index f61fed07f76..a2492b65f98 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -20,7 +20,7 @@ * DEFINE *****************************************************************************/ #define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */ -#define ENDPT_MAX (16) +#define ENDPT_MAX (32) #define CTRL_PAYLOAD_MAX (64) #define RX (0) /* similar to USB_DIR_OUT but can be used as an index */ #define TX (1) /* similar to USB_DIR_IN but can be used as an index */ @@ -88,8 +88,7 @@ struct ci13xxx_ep { struct list_head queue; struct ci13xxx_qh *ptr; dma_addr_t dma; - } qh[2]; - struct usb_request *status; + } qh; int wedge; /* global resources */ @@ -119,9 +118,13 @@ struct ci13xxx { struct dma_pool *qh_pool; /* DMA pool for queue heads */ struct dma_pool *td_pool; /* DMA pool for transfer descs */ + struct usb_request *status; /* ep0 status request */ struct usb_gadget gadget; /* USB slave device */ struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */ + u32 ep0_dir; /* ep0 direction */ +#define ep0out ci13xxx_ep[0] +#define ep0in ci13xxx_ep[16] struct usb_gadget_driver *driver; /* 3rd party gadget driver */ struct ci13xxx_udc_driver *udc_driver; /* device controller driver */ diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f6ff8456d52..1ba4befe336 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -928,8 +928,9 @@ unknown: */ switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_INTERFACE: - if (cdev->config) - f = cdev->config->interface[intf]; + if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; break; case USB_RECIP_ENDPOINT: diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index b5dbb2308f5..6d8e533949e 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -293,6 +293,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/composite.h> #include "gadget_chips.h" @@ -2763,7 +2764,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, return ERR_PTR(-ENOMEM); common->free_storage_on_release = 1; } else { - memset(common, 0, sizeof common); + memset(common, 0, sizeof *common); common->free_storage_on_release = 0; } diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 0c8dd81dddc..b120dbb64d0 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -198,10 +198,10 @@ #define PCH_UDC_BRLEN 0x0F /* Burst length */ #define PCH_UDC_THLEN 0x1F /* Threshold length */ /* Value of EP Buffer Size */ -#define UDC_EP0IN_BUFF_SIZE 64 -#define UDC_EPIN_BUFF_SIZE 512 -#define UDC_EP0OUT_BUFF_SIZE 64 -#define UDC_EPOUT_BUFF_SIZE 512 +#define UDC_EP0IN_BUFF_SIZE 16 +#define UDC_EPIN_BUFF_SIZE 256 +#define UDC_EP0OUT_BUFF_SIZE 16 +#define UDC_EPOUT_BUFF_SIZE 256 /* Value of EP maximum packet size */ #define UDC_EP0IN_MAX_PKT_SIZE 64 #define UDC_EP0OUT_MAX_PKT_SIZE 64 @@ -351,7 +351,7 @@ struct pch_udc_dev { struct pci_pool *data_requests; struct pci_pool *stp_requests; dma_addr_t dma_addr; - unsigned long ep0out_buf[64]; + void *ep0out_buf; struct usb_ctrlrequest setup_data; unsigned long phys_addr; void __iomem *base_addr; @@ -361,6 +361,8 @@ struct pch_udc_dev { #define PCH_UDC_PCI_BAR 1 #define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808 +#define PCI_VENDOR_ID_ROHM 0x10DB +#define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ @@ -1219,11 +1221,11 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req, dev = ep->dev; if (req->dma_mapped) { if (ep->in) - pci_unmap_single(dev->pdev, req->req.dma, - req->req.length, PCI_DMA_TODEVICE); + dma_unmap_single(&dev->pdev->dev, req->req.dma, + req->req.length, DMA_TO_DEVICE); else - pci_unmap_single(dev->pdev, req->req.dma, - req->req.length, PCI_DMA_FROMDEVICE); + dma_unmap_single(&dev->pdev->dev, req->req.dma, + req->req.length, DMA_FROM_DEVICE); req->dma_mapped = 0; req->req.dma = DMA_ADDR_INVALID; } @@ -1414,7 +1416,6 @@ static void pch_udc_start_rxrequest(struct pch_udc_ep *ep, pch_udc_clear_dma(ep->dev, DMA_DIR_RX); td_data = req->td_data; - ep->td_data = req->td_data; /* Set the status bits for all descriptors */ while (1) { td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) | @@ -1613,15 +1614,19 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, if (usbreq->length && ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) { if (ep->in) - usbreq->dma = pci_map_single(dev->pdev, usbreq->buf, - usbreq->length, PCI_DMA_TODEVICE); + usbreq->dma = dma_map_single(&dev->pdev->dev, + usbreq->buf, + usbreq->length, + DMA_TO_DEVICE); else - usbreq->dma = pci_map_single(dev->pdev, usbreq->buf, - usbreq->length, PCI_DMA_FROMDEVICE); + usbreq->dma = dma_map_single(&dev->pdev->dev, + usbreq->buf, + usbreq->length, + DMA_FROM_DEVICE); req->dma_mapped = 1; } if (usbreq->length > 0) { - retval = prepare_dma(ep, req, gfp); + retval = prepare_dma(ep, req, GFP_ATOMIC); if (retval) goto probe_end; } @@ -1646,7 +1651,6 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, pch_udc_wait_ep_stall(ep); pch_udc_ep_clear_nak(ep); pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num)); - pch_udc_set_dma(dev, DMA_DIR_TX); } } /* Now add this request to the ep's pending requests */ @@ -1926,6 +1930,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep) PCH_UDC_BS_DMA_DONE) return; pch_udc_clear_dma(ep->dev, DMA_DIR_RX); + pch_udc_ep_set_ddptr(ep, 0); if ((req->td_data_last->status & PCH_UDC_RXTX_STS) != PCH_UDC_RTS_SUCC) { dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) " @@ -1963,7 +1968,7 @@ static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num) u32 epsts; struct pch_udc_ep *ep; - ep = &dev->ep[2*ep_num]; + ep = &dev->ep[UDC_EPIN_IDX(ep_num)]; epsts = ep->epsts; ep->epsts = 0; @@ -2008,7 +2013,7 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num) struct pch_udc_ep *ep; struct pch_udc_request *req = NULL; - ep = &dev->ep[2*ep_num + 1]; + ep = &dev->ep[UDC_EPOUT_IDX(ep_num)]; epsts = ep->epsts; ep->epsts = 0; @@ -2025,10 +2030,11 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num) } if (epsts & UDC_EPSTS_HE) return; - if (epsts & UDC_EPSTS_RSS) + if (epsts & UDC_EPSTS_RSS) { pch_udc_ep_set_stall(ep); pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); + } if (epsts & UDC_EPSTS_RCS) { if (!dev->prot_stall) { pch_udc_ep_clear_stall(ep); @@ -2060,8 +2066,10 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev) { u32 epsts; struct pch_udc_ep *ep; + struct pch_udc_ep *ep_out; ep = &dev->ep[UDC_EP0IN_IDX]; + ep_out = &dev->ep[UDC_EP0OUT_IDX]; epsts = ep->epsts; ep->epsts = 0; @@ -2073,8 +2081,16 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev) return; if (epsts & UDC_EPSTS_HE) return; - if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) + if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) { pch_udc_complete_transfer(ep); + pch_udc_clear_dma(dev, DMA_DIR_RX); + ep_out->td_data->status = (ep_out->td_data->status & + ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + pch_udc_ep_clear_nak(ep_out); + pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_ep_set_rrdy(ep_out); + } /* On IN interrupt, provide data if we have any */ if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY)) @@ -2102,11 +2118,9 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) dev->stall = 0; dev->ep[UDC_EP0IN_IDX].halted = 0; dev->ep[UDC_EP0OUT_IDX].halted = 0; - /* In data not ready */ - pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX])); dev->setup_data = ep->td_stp->request; pch_udc_init_setup_buff(ep->td_stp); - pch_udc_clear_dma(dev, DMA_DIR_TX); + pch_udc_clear_dma(dev, DMA_DIR_RX); pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]), dev->ep[UDC_EP0IN_IDX].in); if ((dev->setup_data.bRequestType & USB_DIR_IN)) @@ -2122,14 +2136,23 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) setup_supported = dev->driver->setup(&dev->gadget, &dev->setup_data); spin_lock(&dev->lock); + + if (dev->setup_data.bRequestType & USB_DIR_IN) { + ep->td_data->status = (ep->td_data->status & + ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + pch_udc_ep_set_ddptr(ep, ep->td_data_phys); + } /* ep0 in returns data on IN phase */ if (setup_supported >= 0 && setup_supported < UDC_EP0IN_MAX_PKT_SIZE) { pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX])); /* Gadget would have queued a request when * we called the setup */ - pch_udc_set_dma(dev, DMA_DIR_RX); - pch_udc_ep_clear_nak(ep); + if (!(dev->setup_data.bRequestType & USB_DIR_IN)) { + pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_ep_clear_nak(ep); + } } else if (setup_supported < 0) { /* if unsupported request, then stall */ pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX])); @@ -2142,22 +2165,13 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) } } else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) == UDC_EPSTS_OUT_DATA) && !dev->stall) { - if (list_empty(&ep->queue)) { - dev_err(&dev->pdev->dev, "%s: No request\n", __func__); - ep->td_data->status = (ep->td_data->status & - ~PCH_UDC_BUFF_STS) | - PCH_UDC_BS_HST_RDY; - pch_udc_set_dma(dev, DMA_DIR_RX); - } else { - /* control write */ - /* next function will pickuo an clear the status */ + pch_udc_clear_dma(dev, DMA_DIR_RX); + pch_udc_ep_set_ddptr(ep, 0); + if (!list_empty(&ep->queue)) { ep->epsts = stat; - - pch_udc_svc_data_out(dev, 0); - /* re-program desc. pointer for possible ZLPs */ - pch_udc_ep_set_ddptr(ep, ep->td_data_phys); - pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_svc_data_out(dev, PCH_UDC_EP0); } + pch_udc_set_dma(dev, DMA_DIR_RX); } pch_udc_ep_set_rrdy(ep); } @@ -2174,7 +2188,7 @@ static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num) struct pch_udc_ep *ep; struct pch_udc_request *req; - ep = &dev->ep[2*ep_num]; + ep = &dev->ep[UDC_EPIN_IDX(ep_num)]; if (!list_empty(&ep->queue)) { req = list_entry(ep->queue.next, struct pch_udc_request, queue); pch_udc_enable_ep_interrupts(ep->dev, @@ -2196,13 +2210,13 @@ static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr) for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) { /* IN */ if (ep_intr & (0x1 << i)) { - ep = &dev->ep[2*i]; + ep = &dev->ep[UDC_EPIN_IDX(i)]; ep->epsts = pch_udc_read_ep_status(ep); pch_udc_clear_ep_status(ep, ep->epsts); } /* OUT */ if (ep_intr & (0x10000 << i)) { - ep = &dev->ep[2*i+1]; + ep = &dev->ep[UDC_EPOUT_IDX(i)]; ep->epsts = pch_udc_read_ep_status(ep); pch_udc_clear_ep_status(ep, ep->epsts); } @@ -2563,9 +2577,6 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev) dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE; dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE; - dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256, - PCI_DMA_FROMDEVICE); - /* remove ep0 in and out from the list. They have own pointer */ list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list); list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list); @@ -2637,6 +2648,13 @@ static int init_dma_pools(struct pch_udc_dev *dev) dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0; dev->ep[UDC_EP0IN_IDX].td_data = NULL; dev->ep[UDC_EP0IN_IDX].td_data_phys = 0; + + dev->ep0out_buf = kzalloc(UDC_EP0OUT_BUFF_SIZE * 4, GFP_KERNEL); + if (!dev->ep0out_buf) + return -ENOMEM; + dev->dma_addr = dma_map_single(&dev->pdev->dev, dev->ep0out_buf, + UDC_EP0OUT_BUFF_SIZE * 4, + DMA_FROM_DEVICE); return 0; } @@ -2700,7 +2718,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK); - /* Assues that there are no pending requets with this driver */ + /* Assures that there are no pending requests with this driver */ + driver->disconnect(&dev->gadget); driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; @@ -2750,6 +2769,11 @@ static void pch_udc_remove(struct pci_dev *pdev) pci_pool_destroy(dev->stp_requests); } + if (dev->dma_addr) + dma_unmap_single(&dev->pdev->dev, dev->dma_addr, + UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE); + kfree(dev->ep0out_buf); + pch_udc_exit(dev); if (dev->irq_registered) @@ -2792,11 +2816,7 @@ static int pch_udc_resume(struct pci_dev *pdev) int ret; pci_set_power_state(pdev, PCI_D0); - ret = pci_restore_state(pdev); - if (ret) { - dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__); - return ret; - } + pci_restore_state(pdev); ret = pci_enable_device(pdev); if (ret) { dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__); @@ -2914,6 +2934,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = { .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, .class_mask = 0xffffffff, }, + { + PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC), + .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, + .class_mask = 0xffffffff, + }, { 0 }, }; diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 2fc8636316c..12ff6cffedc 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -131,31 +131,31 @@ static struct printer_dev usb_printer_gadget; * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ -static ushort __initdata idVendor; +static ushort idVendor; module_param(idVendor, ushort, S_IRUGO); MODULE_PARM_DESC(idVendor, "USB Vendor ID"); -static ushort __initdata idProduct; +static ushort idProduct; module_param(idProduct, ushort, S_IRUGO); MODULE_PARM_DESC(idProduct, "USB Product ID"); -static ushort __initdata bcdDevice; +static ushort bcdDevice; module_param(bcdDevice, ushort, S_IRUGO); MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); -static char *__initdata iManufacturer; +static char *iManufacturer; module_param(iManufacturer, charp, S_IRUGO); MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); -static char *__initdata iProduct; +static char *iProduct; module_param(iProduct, charp, S_IRUGO); MODULE_PARM_DESC(iProduct, "USB Product string"); -static char *__initdata iSerialNum; +static char *iSerialNum; module_param(iSerialNum, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNum, "1"); -static char *__initdata iPNPstring; +static char *iPNPstring; module_param(iPNPstring, charp, S_IRUGO); MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"); @@ -1596,13 +1596,12 @@ cleanup(void) int status; mutex_lock(&usb_printer_gadget.lock_printer_io); - class_destroy(usb_gadget_class); - unregister_chrdev_region(g_printer_devno, 2); - status = usb_gadget_unregister_driver(&printer_driver); if (status) ERROR(dev, "usb_gadget_unregister_driver %x\n", status); + unregister_chrdev_region(g_printer_devno, 2); + class_destroy(usb_gadget_class); mutex_unlock(&usb_printer_gadget.lock_printer_io); } module_exit(cleanup); diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 20d43da319a..015118535f7 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -258,7 +258,7 @@ static int pipe_buffer_setting(struct r8a66597 *r8a66597, break; case R8A66597_BULK: /* isochronous pipes may be used as bulk pipes */ - if (info->pipe > R8A66597_BASE_PIPENUM_BULK) + if (info->pipe >= R8A66597_BASE_PIPENUM_BULK) bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK; else bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 24046c0f587..0e6afa260ed 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -151,6 +151,8 @@ config USB_EHCI_MSM Qualcomm chipsets. Root Hub has inbuilt TT. This driver depends on OTG driver for PHY initialization, clock management, powering up VBUS, and power management. + This driver is not supported on boards like trout which + has an external PHY. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 2baf8a84908..a869e3c103d 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) * mark HW unaccessible. The PM and USB cores make sure that * the root hub is either suspended or stopped. */ - spin_lock_irqsave(&ehci->lock, flags); ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); + spin_lock_irqsave(&ehci->lock, flags); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 86e42892016..5c761df7fa8 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -52,7 +52,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, struct resource *res; int irq; int retval; - unsigned int temp; pr_debug("initializing FSL-SOC USB Controller\n"); @@ -126,18 +125,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, goto err3; } - /* - * Check if it is MPC5121 SoC, otherwise set pdata->have_sysif_regs - * flag for 83xx or 8536 system interface registers. - */ - if (pdata->big_endian_mmio) - temp = in_be32(hcd->regs + FSL_SOC_USB_ID); - else - temp = in_le32(hcd->regs + FSL_SOC_USB_ID); - - if ((temp & ID_MSK) != (~((temp & NID_MSK) >> 8) & ID_MSK)) - pdata->have_sysif_regs = 1; - /* Enable USB controller, 83xx or 8536 */ if (pdata->have_sysif_regs) setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 2c835379522..3fabed33d94 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -19,9 +19,6 @@ #define _EHCI_FSL_H /* offsets for the non-ehci registers in the FSL SOC USB controller */ -#define FSL_SOC_USB_ID 0x0 -#define ID_MSK 0x3f -#define NID_MSK 0x3f00 #define FSL_SOC_USB_ULPIVP 0x170 #define FSL_SOC_USB_PORTSC1 0x184 #define PORT_PTS_MSK (3<<30) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6fee3cd58ef..74dcf49bd01 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -572,6 +572,8 @@ static int ehci_init(struct usb_hcd *hcd) ehci->iaa_watchdog.function = ehci_iaa_watchdog; ehci->iaa_watchdog.data = (unsigned long) ehci; + hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); + /* * hw default: 1K periodic list heads, one per frame. * periodic_size can shrink by USBCMD update if hcc_params allows. @@ -579,11 +581,20 @@ static int ehci_init(struct usb_hcd *hcd) ehci->periodic_size = DEFAULT_I_TDPS; INIT_LIST_HEAD(&ehci->cached_itd_list); INIT_LIST_HEAD(&ehci->cached_sitd_list); + + if (HCC_PGM_FRAMELISTLEN(hcc_params)) { + /* periodic schedule size can be smaller than default */ + switch (EHCI_TUNE_FLS) { + case 0: ehci->periodic_size = 1024; break; + case 1: ehci->periodic_size = 512; break; + case 2: ehci->periodic_size = 256; break; + default: BUG(); + } + } if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) return retval; /* controllers may cache some of the periodic schedule ... */ - hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); if (HCC_ISOC_CACHE(hcc_params)) // full frame cache ehci->i_thresh = 2 + 8; else // N microframes cached @@ -637,12 +648,6 @@ static int ehci_init(struct usb_hcd *hcd) /* periodic schedule size can be smaller than default */ temp &= ~(3 << 2); temp |= (EHCI_TUNE_FLS << 2); - switch (EHCI_TUNE_FLS) { - case 0: ehci->periodic_size = 1024; break; - case 1: ehci->periodic_size = 512; break; - case 2: ehci->periodic_size = 256; break; - default: BUG(); - } } if (HCC_LPM(hcc_params)) { /* support link power management EHCI 1.1 addendum */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 796ea0c8900..8a515f0d598 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -111,6 +111,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, { int port; u32 temp; + unsigned long flags; /* If remote wakeup is enabled for the root hub but disabled * for the controller, we must adjust all the port wakeup flags @@ -120,6 +121,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup) return; + spin_lock_irqsave(&ehci->lock, flags); + /* clear phy low-power mode before changing wakeup flags */ if (ehci->has_hostpc) { port = HCS_N_PORTS(ehci->hcs_params); @@ -131,7 +134,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, temp = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg); } + spin_unlock_irqrestore(&ehci->lock, flags); msleep(5); + spin_lock_irqsave(&ehci->lock, flags); } port = HCS_N_PORTS(ehci->hcs_params); @@ -170,6 +175,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, /* Does the root hub have a port wakeup pending? */ if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)) usb_hcd_resume_root_hub(ehci_to_hcd(ehci)); + + spin_unlock_irqrestore(&ehci->lock, flags); } static int ehci_bus_suspend (struct usb_hcd *hcd) diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index fa59b26fc5b..c8e360d7d97 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -21,10 +21,13 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> #include <linux/slab.h> #include <mach/mxc_ehci.h> +#include <asm/mach-types.h> + #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { @@ -114,6 +117,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) struct usb_hcd *hcd; struct resource *res; int irq, ret; + unsigned int flags; struct ehci_mxc_priv *priv; struct device *dev = &pdev->dev; struct ehci_hcd *ehci; @@ -177,8 +181,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) clk_enable(priv->ahbclk); } - /* "dr" device has its own clock */ - if (pdev->id == 0) { + /* "dr" device has its own clock on i.MX51 */ + if (cpu_is_mx51() && (pdev->id == 0)) { priv->phy1clk = clk_get(dev, "usb_phy1"); if (IS_ERR(priv->phy1clk)) { ret = PTR_ERR(priv->phy1clk); @@ -240,6 +244,23 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (ret) goto err_add; + if (pdata->otg) { + /* + * efikamx and efikasb have some hardware bug which is + * preventing usb to work unless CHRGVBUS is set. + * It's in violation of USB specs + */ + if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) { + flags = otg_io_read(pdata->otg, ULPI_OTG_CTRL); + flags |= ULPI_OTG_CTRL_CHRGVBUS; + ret = otg_io_write(pdata->otg, flags, ULPI_OTG_CTRL); + if (ret) { + dev_err(dev, "unable to set CHRVBUS\n"); + goto err_add; + } + } + } + return 0; err_add: diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 680f2ef4e59..f784ceb862a 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -796,7 +796,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { - dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret); + dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret); ret = -ENOMEM; goto err_create_hcd; } @@ -864,7 +864,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ret = omap_start_ehc(omap, hcd); if (ret) { - dev_dbg(&pdev->dev, "failed to start ehci\n"); + dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret); goto err_start; } @@ -879,7 +879,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 76179c39c0e..07bb982e59f 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -44,28 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) return 0; } -static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci) +static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci) { struct pci_dev *amd_smbus_dev; u8 rev = 0; amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); - if (!amd_smbus_dev) - return 0; - - pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); - if (rev < 0x40) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; + if (amd_smbus_dev) { + pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + if (rev < 0x40) { + pci_dev_put(amd_smbus_dev); + amd_smbus_dev = NULL; + return 0; + } + } else { + amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL); + if (!amd_smbus_dev) + return 0; + pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + if (rev < 0x11 || rev > 0x18) { + pci_dev_put(amd_smbus_dev); + amd_smbus_dev = NULL; + return 0; + } } if (!amd_nb_dev) amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL); - if (!amd_nb_dev) - ehci_err(ehci, "QUIRK: unable to get AMD NB device\n"); - ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n"); + ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n"); pci_dev_put(amd_smbus_dev); amd_smbus_dev = NULL; @@ -131,7 +138,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* cache this readonly data; minimize chip reads */ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - if (ehci_quirk_amd_SB800(ehci)) + if (ehci_quirk_amd_hudson(ehci)) ehci->amd_l1_fix = 1; retval = ehci_halt(ehci); @@ -360,8 +367,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) * mark HW unaccessible. The PM and USB cores make sure that * the root hub is either suspended or stopped. */ - spin_lock_irqsave (&ehci->lock, flags); ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); + spin_lock_irqsave (&ehci->lock, flags); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 574b99ea070..79a66d622f9 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev) } } -struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = { +static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = { .big_endian_desc = 1, .big_endian_mmio = 1, .es = 1, + .have_sysif_regs = 0, .le_setup_buf = 1, .init = fsl_usb2_mpc5121_init, .exit = fsl_usb2_mpc5121_exit, }; #endif /* CONFIG_PPC_MPC512x */ +static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = { + .have_sysif_regs = 1, +}; + static const struct of_device_id fsl_usb2_mph_dr_of_match[] = { - { .compatible = "fsl-usb2-mph", }, - { .compatible = "fsl-usb2-dr", }, + { .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, }, + { .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, }, #ifdef CONFIG_PPC_MPC512x { .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, }, #endif diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 990f06b89ea..2e9602a10e9 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -861,6 +861,7 @@ static int sl811h_urb_enqueue( DBG("dev %d ep%d maxpacket %d\n", udev->devnum, epnum, ep->maxpacket); retval = -EINVAL; + kfree(ep); goto fail; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index df558f6f84e..3e8211c1ce5 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -308,11 +308,8 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, /* Ring the host controller doorbell after placing a command on the ring */ void xhci_ring_cmd_db(struct xhci_hcd *xhci) { - u32 temp; - xhci_dbg(xhci, "// Ding dong!\n"); - temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK; - xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]); + xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]); /* Flush PCI posted writes */ xhci_readl(xhci, &xhci->dba->doorbell[0]); } @@ -322,26 +319,24 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int ep_index, unsigned int stream_id) { - struct xhci_virt_ep *ep; - unsigned int ep_state; - u32 field; __u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id]; + struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; + unsigned int ep_state = ep->ep_state; - ep = &xhci->devs[slot_id]->eps[ep_index]; - ep_state = ep->ep_state; /* Don't ring the doorbell for this endpoint if there are pending - * cancellations because the we don't want to interrupt processing. + * cancellations because we don't want to interrupt processing. * We don't want to restart any stream rings if there's a set dequeue * pointer command pending because the device can choose to start any * stream once the endpoint is on the HW schedule. * FIXME - check all the stream rings for pending cancellations. */ - if (!(ep_state & EP_HALT_PENDING) && !(ep_state & SET_DEQ_PENDING) - && !(ep_state & EP_HALTED)) { - field = xhci_readl(xhci, db_addr) & DB_MASK; - field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id); - xhci_writel(xhci, field, db_addr); - } + if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) || + (ep_state & EP_HALTED)) + return; + xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr); + /* The CPU has better things to do at this point than wait for a + * write-posting flush. It'll get there soon enough. + */ } /* Ring the doorbell for any rings with pending URBs */ @@ -1188,7 +1183,7 @@ static void handle_port_status(struct xhci_hcd *xhci, addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1); temp = xhci_readl(xhci, addr); - if ((temp & PORT_CONNECT) && (hcd->state == HC_STATE_SUSPENDED)) { + if (hcd->state == HC_STATE_SUSPENDED) { xhci_dbg(xhci, "resume root hub\n"); usb_hcd_resume_root_hub(hcd); } @@ -1710,8 +1705,7 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, /* Others already handled above */ break; } - dev_dbg(&td->urb->dev->dev, - "ep %#x - asked for %d bytes, " + xhci_dbg(xhci, "ep %#x - asked for %d bytes, " "%d bytes untransferred\n", td->urb->ep->desc.bEndpointAddress, td->urb->transfer_buffer_length, @@ -2389,7 +2383,8 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) } xhci_dbg(xhci, "\n"); if (!in_interrupt()) - dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n", + xhci_dbg(xhci, "ep %#x - urb len = %d, sglist used, " + "num_trbs = %d\n", urb->ep->desc.bEndpointAddress, urb->transfer_buffer_length, num_trbs); @@ -2414,14 +2409,17 @@ static void check_trb_math(struct urb *urb, int num_trbs, int running_total) static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index, unsigned int stream_id, int start_cycle, - struct xhci_generic_trb *start_trb, struct xhci_td *td) + struct xhci_generic_trb *start_trb) { /* * Pass all the TRBs to the hardware at once and make sure this write * isn't reordered. */ wmb(); - start_trb->field[3] |= start_cycle; + if (start_cycle) + start_trb->field[3] |= start_cycle; + else + start_trb->field[3] &= ~0x1; xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); } @@ -2449,7 +2447,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, * to set the polling interval (once the API is added). */ if (xhci_interval != ep_interval) { - if (!printk_ratelimit()) + if (printk_ratelimit()) dev_dbg(&urb->dev->dev, "Driver uses different interval" " (%d microframe%s) than xHCI " "(%d microframe%s)\n", @@ -2551,9 +2549,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, u32 remainder = 0; /* Don't change the cycle bit of the first TRB until later */ - if (first_trb) + if (first_trb) { first_trb = false; - else + if (start_cycle == 0) + field |= 0x1; + } else field |= ep_ring->cycle_state; /* Chain all the TRBs together; clear the chain bit in the last @@ -2625,7 +2625,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, check_trb_math(urb, num_trbs, running_total); giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, - start_cycle, start_trb, td); + start_cycle, start_trb); return 0; } @@ -2671,7 +2671,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ if (!in_interrupt()) - dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n", + xhci_dbg(xhci, "ep %#x - urb len = %#x (%d), " + "addr = %#llx, num_trbs = %d\n", urb->ep->desc.bEndpointAddress, urb->transfer_buffer_length, urb->transfer_buffer_length, @@ -2711,9 +2712,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field = 0; /* Don't change the cycle bit of the first TRB until later */ - if (first_trb) + if (first_trb) { first_trb = false; - else + if (start_cycle == 0) + field |= 0x1; + } else field |= ep_ring->cycle_state; /* Chain all the TRBs together; clear the chain bit in the last @@ -2757,7 +2760,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, check_trb_math(urb, num_trbs, running_total); giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, - start_cycle, start_trb, td); + start_cycle, start_trb); return 0; } @@ -2818,13 +2821,17 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Queue setup TRB - see section 6.4.1.2.1 */ /* FIXME better way to translate setup_packet into two u32 fields? */ setup = (struct usb_ctrlrequest *) urb->setup_packet; + field = 0; + field |= TRB_IDT | TRB_TYPE(TRB_SETUP); + if (start_cycle == 0) + field |= 0x1; queue_trb(xhci, ep_ring, false, true, /* FIXME endianness is probably going to bite my ass here. */ setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16, setup->wIndex | setup->wLength << 16, TRB_LEN(8) | TRB_INTR_TARGET(0), /* Immediate data in pointer */ - TRB_IDT | TRB_TYPE(TRB_SETUP)); + field); /* If there's data, queue data TRBs */ field = 0; @@ -2859,7 +2866,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state); giveback_first_trb(xhci, slot_id, ep_index, 0, - start_cycle, start_trb, td); + start_cycle, start_trb); return 0; } @@ -2900,6 +2907,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int running_total, trb_buff_len, td_len, td_remain_len, ret; u64 start_addr, addr; int i, j; + bool more_trbs_coming; ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; @@ -2910,7 +2918,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } if (!in_interrupt()) - dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d)," + xhci_dbg(xhci, "ep %#x - urb len = %#x (%d)," " addr = %#llx, num_tds = %d\n", urb->ep->desc.bEndpointAddress, urb->transfer_buffer_length, @@ -2950,7 +2958,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field |= TRB_TYPE(TRB_ISOC); /* Assume URB_ISO_ASAP is set */ field |= TRB_SIA; - if (i > 0) + if (i == 0) { + if (start_cycle == 0) + field |= 0x1; + } else field |= ep_ring->cycle_state; first_trb = false; } else { @@ -2965,9 +2976,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, */ if (j < trbs_per_td - 1) { field |= TRB_CHAIN; + more_trbs_coming = true; } else { td->last_trb = ep_ring->enqueue; field |= TRB_IOC; + more_trbs_coming = false; } /* Calculate TRB length */ @@ -2980,7 +2993,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, false, + queue_trb(xhci, ep_ring, false, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -3003,10 +3016,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } } - wmb(); - start_trb->field[3] |= start_cycle; - - xhci_ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id); + giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, + start_cycle, start_trb); return 0; } @@ -3064,7 +3075,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, * to set the polling interval (once the API is added). */ if (xhci_interval != ep_interval) { - if (!printk_ratelimit()) + if (printk_ratelimit()) dev_dbg(&urb->dev->dev, "Driver uses different interval" " (%d microframe%s) than xHCI " "(%d microframe%s)\n", diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 45e4a3108cc..34cf4e16587 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -226,7 +226,8 @@ static int xhci_setup_msi(struct xhci_hcd *xhci) static int xhci_setup_msix(struct xhci_hcd *xhci) { int i, ret = 0; - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); /* * calculate number of msi-x vectors supported. @@ -265,6 +266,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) goto disable_msix; } + hcd->msix_enabled = 1; return ret; disable_msix: @@ -280,7 +282,8 @@ free_entries: /* Free any IRQs and disable MSI-X */ static void xhci_cleanup_msix(struct xhci_hcd *xhci) { - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); xhci_free_irq(xhci); @@ -292,6 +295,7 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci) pci_disable_msi(pdev); } + hcd->msix_enabled = 0; return; } @@ -508,9 +512,10 @@ void xhci_stop(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); xhci_reset(xhci); - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); + #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING /* Tell the event ring poll function not to reschedule */ xhci->zombie = 1; @@ -544,9 +549,10 @@ void xhci_shutdown(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); + xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n", xhci_readl(xhci, &xhci->op_regs->status)); } @@ -647,6 +653,7 @@ int xhci_suspend(struct xhci_hcd *xhci) int rc = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; + int i; spin_lock_irq(&xhci->lock); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -677,10 +684,15 @@ int xhci_suspend(struct xhci_hcd *xhci) spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } - /* step 5: remove core well power */ - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + /* step 5: remove core well power */ + /* synchronize irq when using MSI-X */ + if (xhci->msix_entries) { + for (i = 0; i < xhci->msix_count; i++) + synchronize_irq(xhci->msix_entries[i].vector); + } + return rc; } @@ -694,7 +706,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int old_state, retval; old_state = hcd->state; @@ -729,9 +740,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); xhci_reset(xhci); - if (hibernated) - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING /* Tell the event ring poll function not to reschedule */ @@ -765,30 +775,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) return retval; } - spin_unlock_irq(&xhci->lock); - /* Re-setup MSI-X */ - if (hcd->irq) - free_irq(hcd->irq, hcd); - hcd->irq = -1; - - retval = xhci_setup_msix(xhci); - if (retval) - /* fall back to msi*/ - retval = xhci_setup_msi(xhci); - - if (retval) { - /* fall back to legacy interrupt*/ - retval = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, - hcd->irq_descr, hcd); - if (retval) { - xhci_err(xhci, "request interrupt %d failed\n", - pdev->irq); - return retval; - } - hcd->irq = pdev->irq; - } - - spin_lock_irq(&xhci->lock); /* step 4: set Run/Stop bit */ command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_RUN; @@ -2445,8 +2431,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) xhci_err(xhci, "Error while assigning device slot ID\n"); return 0; } - /* xhci_alloc_virt_device() does not touch rings; no need to lock */ - if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) { + /* xhci_alloc_virt_device() does not touch rings; no need to lock. + * Use GFP_NOIO, since this function can be called from + * xhci_discover_or_reset_device(), which may be called as part of + * mass storage driver error handling. + */ + if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) { /* Disable slot, if we can do it without mem alloc */ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); spin_lock_irqsave(&xhci->lock, flags); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 170c367112d..7f236fd2201 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -436,22 +436,18 @@ struct xhci_run_regs { /** * struct doorbell_array * + * Bits 0 - 7: Endpoint target + * Bits 8 - 15: RsvdZ + * Bits 16 - 31: Stream ID + * * Section 5.6 */ struct xhci_doorbell_array { u32 doorbell[256]; }; -#define DB_TARGET_MASK 0xFFFFFF00 -#define DB_STREAM_ID_MASK 0x0000FFFF -#define DB_TARGET_HOST 0x0 -#define DB_STREAM_ID_HOST 0x0 -#define DB_MASK (0xff << 8) - -/* Endpoint Target - bits 0:7 */ -#define EPI_TO_DB(p) (((p) + 1) & 0xff) -#define STREAM_ID_TO_DB(p) (((p) & 0xffff) << 16) - +#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) +#define DB_VALUE_HOST 0x00000000 /** * struct xhci_protocol_caps diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 1732d9bc097..1616ad1793a 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -45,7 +45,7 @@ struct usb_led { static void change_color(struct usb_led *led) { - int retval; + int retval = 0; unsigned char *buffer; buffer = kmalloc(8, GFP_KERNEL); diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 4ff21587ab0..f7a20573803 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -776,7 +776,6 @@ static const struct usb_device_id uss720_table[] = { { USB_DEVICE(0x0557, 0x2001) }, { USB_DEVICE(0x0729, 0x1284) }, { USB_DEVICE(0x1293, 0x0002) }, - { USB_DEVICE(0x1293, 0x0002) }, { USB_DEVICE(0x050d, 0x0002) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index eeba228eb2a..9d49d1cd7ce 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -404,6 +404,7 @@ static int bfin_musb_init(struct musb *musb) musb->xceiv->set_power = bfin_musb_set_power; musb->isr = blackfin_interrupt; + musb->double_buffer_not_ok = true; return 0; } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 07cf394e491..54a8bd1047d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -128,12 +128,7 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME); static inline struct musb *dev_to_musb(struct device *dev) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD - /* usbcore insists dev->driver_data is a "struct hcd *" */ - return hcd_to_musb(dev_get_drvdata(dev)); -#else return dev_get_drvdata(dev); -#endif } /*-------------------------------------------------------------------------*/ @@ -1876,10 +1871,9 @@ allocate_instance(struct device *dev, musb = kzalloc(sizeof *musb, GFP_KERNEL); if (!musb) return NULL; - dev_set_drvdata(dev, musb); #endif - + dev_set_drvdata(dev, musb); musb->mregs = mbase; musb->ctrl_base = mbase; musb->nIrq = -ENODEV; @@ -2191,7 +2185,7 @@ static int __init musb_probe(struct platform_device *pdev) void __iomem *base; iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iomem || irq == 0) + if (!iomem || irq <= 0) return -ENODEV; base = ioremap(iomem->start, resource_size(iomem)); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index d0c236f8e19..d74a8113ae7 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -488,6 +488,18 @@ struct musb { unsigned set_address:1; unsigned test_mode:1; unsigned softconnect:1; + /* + * FIXME: Remove this flag. + * + * This is only added to allow Blackfin to work + * with current driver. For some unknown reason + * Blackfin doesn't work with double buffering + * and that's enabled by default. + * + * We added this flag to forcefully disable double + * buffering until we get it working. + */ + unsigned double_buffer_not_ok:1 __deprecated; u8 address; u8 test_mode_nr; diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 916065ba9e7..3a97c4e2d4f 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -169,6 +169,9 @@ struct dma_controller { dma_addr_t dma_addr, u32 length); int (*channel_abort)(struct dma_channel *); + int (*is_compatible)(struct dma_channel *channel, + u16 maxpacket, + void *buf, u32 length); }; /* called after channel_program(), may indicate a fault */ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ed58c6c8f15..2fe304611dc 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -92,11 +92,33 @@ /* ----------------------------------------------------------------------- */ +#define is_buffer_mapped(req) (is_dma_capable() && \ + (req->map_state != UN_MAPPED)) + /* Maps the buffer to dma */ static inline void map_dma_buffer(struct musb_request *request, - struct musb *musb) + struct musb *musb, struct musb_ep *musb_ep) { + int compatible = true; + struct dma_controller *dma = musb->dma_controller; + + request->map_state = UN_MAPPED; + + if (!is_dma_capable() || !musb_ep->dma) + return; + + /* Check if DMA engine can handle this request. + * DMA code must reject the USB request explicitly. + * Default behaviour is to map the request. + */ + if (dma->is_compatible) + compatible = dma->is_compatible(musb_ep->dma, + musb_ep->packet_sz, request->request.buf, + request->request.length); + if (!compatible) + return; + if (request->request.dma == DMA_ADDR_INVALID) { request->request.dma = dma_map_single( musb->controller, @@ -105,7 +127,7 @@ static inline void map_dma_buffer(struct musb_request *request, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - request->mapped = 1; + request->map_state = MUSB_MAPPED; } else { dma_sync_single_for_device(musb->controller, request->request.dma, @@ -113,7 +135,7 @@ static inline void map_dma_buffer(struct musb_request *request, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - request->mapped = 0; + request->map_state = PRE_MAPPED; } } @@ -121,11 +143,14 @@ static inline void map_dma_buffer(struct musb_request *request, static inline void unmap_dma_buffer(struct musb_request *request, struct musb *musb) { + if (!is_buffer_mapped(request)) + return; + if (request->request.dma == DMA_ADDR_INVALID) { DBG(20, "not unmapping a never mapped buffer\n"); return; } - if (request->mapped) { + if (request->map_state == MUSB_MAPPED) { dma_unmap_single(musb->controller, request->request.dma, request->request.length, @@ -133,16 +158,15 @@ static inline void unmap_dma_buffer(struct musb_request *request, ? DMA_TO_DEVICE : DMA_FROM_DEVICE); request->request.dma = DMA_ADDR_INVALID; - request->mapped = 0; - } else { + } else { /* PRE_MAPPED */ dma_sync_single_for_cpu(musb->controller, request->request.dma, request->request.length, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - } + request->map_state = UN_MAPPED; } /* @@ -172,8 +196,7 @@ __acquires(ep->musb->lock) ep->busy = 1; spin_unlock(&musb->lock); - if (is_dma_capable() && ep->dma) - unmap_dma_buffer(req, musb); + unmap_dma_buffer(req, musb); if (request->status == 0) DBG(5, "%s done request %p, %d/%d\n", ep->end_point.name, request, @@ -335,7 +358,7 @@ static void txstate(struct musb *musb, struct musb_request *req) csr); #ifndef CONFIG_MUSB_PIO_ONLY - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; size_t request_size; @@ -436,8 +459,7 @@ static void txstate(struct musb *musb, struct musb_request *req) * Unmap the dma buffer back to cpu if dma channel * programming fails */ - if (is_dma_capable() && musb_ep->dma) - unmap_dma_buffer(req, musb); + unmap_dma_buffer(req, musb); musb_write_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); @@ -627,7 +649,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) return; } - if (is_cppi_enabled() && musb_ep->dma) { + if (is_cppi_enabled() && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; @@ -658,7 +680,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) len = musb_readw(epio, MUSB_RXCOUNT); if (request->actual < request->length) { #ifdef CONFIG_USB_INVENTRA_DMA - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { struct dma_controller *c; struct dma_channel *channel; int use_dma = 0; @@ -742,7 +764,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = min_t(unsigned, len, fifo_count); #ifdef CONFIG_USB_TUSB_OMAP_DMA - if (tusb_dma_omap() && musb_ep->dma) { + if (tusb_dma_omap() && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; u32 dma_addr = request->dma + request->actual; @@ -762,7 +784,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) * programming fails. This buffer is mapped if the * channel allocation is successful */ - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { unmap_dma_buffer(req, musb); /* @@ -989,7 +1011,11 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set TXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + if (musb->double_buffer_not_ok) + musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -1025,7 +1051,11 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + if (musb->double_buffer_not_ok) + musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { @@ -1214,10 +1244,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, request->epnum = musb_ep->current_epnum; request->tx = musb_ep->is_in; - if (is_dma_capable() && musb_ep->dma) - map_dma_buffer(request, musb); - else - request->mapped = 0; + map_dma_buffer(request, musb, musb_ep); spin_lock_irqsave(&musb->lock, lockflags); diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h index dec8dc00819..a55354fbccf 100644 --- a/drivers/usb/musb/musb_gadget.h +++ b/drivers/usb/musb/musb_gadget.h @@ -35,13 +35,19 @@ #ifndef __MUSB_GADGET_H #define __MUSB_GADGET_H +enum buffer_map_state { + UN_MAPPED = 0, + PRE_MAPPED, + MUSB_MAPPED +}; + struct musb_request { struct usb_request request; struct musb_ep *ep; struct musb *musb; u8 tx; /* endpoint direction */ u8 epnum; - u8 mapped; + enum buffer_map_state map_state; }; static inline struct musb_request *to_musb_request(struct usb_request *req) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 4d5bcb4e14d..0f523d7db57 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -609,7 +609,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffer mode. */ - if (musb->hwvers < MUSB_HWVERS_2000) + if (musb->double_buffer_not_ok) musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx); else musb_writew(ep->regs, MUSB_RXMAXP, @@ -784,14 +784,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* protocol/endpoint/interval/NAKlimit */ if (epnum) { musb_writeb(epio, MUSB_TXTYPE, qh->type_reg); - if (can_bulk_split(musb, qh->type)) + if (musb->double_buffer_not_ok) musb_writew(epio, MUSB_TXMAXP, - packet_sz - | ((hw_ep->max_packet_sz_tx / - packet_sz) - 1) << 11); + hw_ep->max_packet_sz_tx); else musb_writew(epio, MUSB_TXMAXP, - packet_sz); + qh->maxpacket | + ((qh->hb_mult - 1) << 11)); musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg); } else { musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg); diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index f763d62f151..21056c924c7 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -94,24 +94,33 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase, { musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW), - ((u16)((u32) dma_addr & 0xFFFF))); + dma_addr); musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH), - ((u16)(((u32) dma_addr >> 16) & 0xFFFF))); + (dma_addr >> 16)); } static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel) { - return musb_readl(mbase, + u32 count = musb_readw(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH)); + + count = count << 16; + + count |= musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW)); + + return count; } static inline void musb_write_hsdma_count(void __iomem *mbase, u8 bchannel, u32 len) { - musb_writel(mbase, + musb_writew(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len); + musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH), - len); + (len >> 16)); } #endif /* CONFIG_BLACKFIN */ diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 9fb875d5f09..9ffc8237fb4 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -103,6 +103,8 @@ config USB_MSM_OTG_72K required after resetting the hardware and power management. This driver is required even for peripheral only or host only mode configurations. + This driver is not supported on boards like trout which + has an external PHY. config AB8500_USB tristate "AB8500 USB Transceiver Driver" diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index e70014ab097..8acf165fe13 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -132,6 +132,8 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) platform_set_drvdata(pdev, nop); + BLOCKING_INIT_NOTIFIER_HEAD(&nop->otg.notifier); + return 0; exit: kfree(nop); diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c index 059d9ac0ab5..770d799d5af 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/otg/ulpi.c @@ -45,7 +45,7 @@ struct ulpi_info { /* ULPI hardcoded IDs, used for probing */ static struct ulpi_info ulpi_ids[] = { ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"), - ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB3319"), + ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"), }; static int ulpi_set_otg_flags(struct otg_transceiver *otg) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 63f7cc45bca..7b8815ddf36 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -486,12 +486,22 @@ static void ch341_read_int_callback(struct urb *urb) if (actual_length >= 4) { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned long flags; + u8 prev_line_status = priv->line_status; spin_lock_irqsave(&priv->lock, flags); priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT; if ((data[1] & CH341_MULT_STAT)) priv->multi_status_change = 1; spin_unlock_irqrestore(&priv->lock, flags); + + if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) { + struct tty_struct *tty = tty_port_tty_get(&port->port); + if (tty) + usb_serial_handle_dcd_change(port, tty, + priv->line_status & CH341_BIT_DCD); + tty_kref_put(tty); + } + wake_up_interruptible(&priv->delta_msr_wait); } diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 8d7731dbf47..735ea03157a 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -49,7 +49,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); -static int cp210x_carrier_raised(struct usb_serial_port *p); static int debug; @@ -87,7 +86,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */ - { USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ @@ -110,7 +108,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ + { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ @@ -165,8 +165,7 @@ static struct usb_serial_driver cp210x_device = { .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, .attach = cp210x_startup, - .dtr_rts = cp210x_dtr_rts, - .carrier_raised = cp210x_carrier_raised + .dtr_rts = cp210x_dtr_rts }; /* Config request types */ @@ -765,15 +764,6 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) return result; } -static int cp210x_carrier_raised(struct usb_serial_port *p) -{ - unsigned int control; - cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1); - if (control & CONTROL_DCD) - return 1; - return 0; -} - static void cp210x_break_ctl (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index b92070c103c..666e5a6edd8 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -455,7 +455,6 @@ static int digi_write_room(struct tty_struct *tty); static int digi_chars_in_buffer(struct tty_struct *tty); static int digi_open(struct tty_struct *tty, struct usb_serial_port *port); static void digi_close(struct usb_serial_port *port); -static int digi_carrier_raised(struct usb_serial_port *port); static void digi_dtr_rts(struct usb_serial_port *port, int on); static int digi_startup_device(struct usb_serial *serial); static int digi_startup(struct usb_serial *serial); @@ -511,7 +510,6 @@ static struct usb_serial_driver digi_acceleport_2_device = { .open = digi_open, .close = digi_close, .dtr_rts = digi_dtr_rts, - .carrier_raised = digi_carrier_raised, .write = digi_write, .write_room = digi_write_room, .write_bulk_callback = digi_write_bulk_callback, @@ -1339,14 +1337,6 @@ static void digi_dtr_rts(struct usb_serial_port *port, int on) digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1); } -static int digi_carrier_raised(struct usb_serial_port *port) -{ - struct digi_port *priv = usb_get_serial_port_data(port); - if (priv->dp_modem_signals & TIOCM_CD) - return 1; - return 0; -} - static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) { int ret; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a2668d08926..f349a3629d0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -100,6 +100,7 @@ struct ftdi_sio_quirk { static int ftdi_jtag_probe(struct usb_serial *serial); static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); static int ftdi_NDI_device_setup(struct usb_serial *serial); +static int ftdi_stmclite_probe(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); @@ -123,6 +124,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { .port_probe = ftdi_HE_TIRA1_setup, }; +static struct ftdi_sio_quirk ftdi_stmclite_quirk = { + .probe = ftdi_stmclite_probe, +}; + /* * The 8U232AM has the same API as the sio except for: * - it can support MUCH higher baudrates; up to: @@ -616,6 +621,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) }, { USB_DEVICE(TTI_VID, TTI_QL355P_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, + { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) }, { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, @@ -676,7 +682,17 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, - { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, @@ -800,6 +816,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), + .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1699,6 +1717,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial) } /* + * First and second port on STMCLiteadaptors is reserved for JTAG interface + * and the forth port for pio + */ +static int ftdi_stmclite_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + struct usb_interface *interface = serial->interface; + + dbg("%s", __func__); + + if (interface == udev->actconfig->interface[2]) + return 0; + + dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + + return -ENODEV; +} + +/* * The Matrix Orbital VK204-25-USB has an invalid IN endpoint. * We have to correct it if we want to read from it. */ diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index bf086728548..117e8e6f93c 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -518,6 +518,12 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * Acton Research Corp. + */ +#define ACTON_VID 0x0647 /* Vendor ID */ +#define ACTON_SPECTRAPRO_PID 0x0100 + +/* * Contec products (http://www.contec.com) * Submitted by Daniel Sangorrin */ @@ -569,11 +575,23 @@ #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ /* - * Icom ID-1 digital transceiver + * Definitions for Icom Inc. devices */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 +#define ICOM_VID 0x0C26 /* Icom vendor ID */ +/* Note: ID-1 is a communications tranceiver for HAM-radio operators */ +#define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */ +/* Note: OPC is an Optional cable to connect an Icom Tranceiver */ +#define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */ +/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */ +#define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */ +#define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */ +#define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/ +#define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */ +#define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */ +#define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */ +#define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */ +#define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */ +#define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */ /* * GN Otometrics (http://www.otometrics.com) @@ -1022,6 +1040,12 @@ #define WHT_PID 0x0004 /* Wireless Handheld Terminal */ /* + * STMicroelectonics + */ +#define ST_VID 0x0483 +#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */ + +/* * Papouch products (http://www.papouch.com/) * Submitted by Folkert van Heusden */ diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index e6833e216fc..e4db5ad2bc5 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -479,6 +479,26 @@ int usb_serial_handle_break(struct usb_serial_port *port) } EXPORT_SYMBOL_GPL(usb_serial_handle_break); +/** + * usb_serial_handle_dcd_change - handle a change of carrier detect state + * @port: usb_serial_port structure for the open port + * @tty: tty_struct structure for the port + * @status: new carrier detect status, nonzero if active + */ +void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, + struct tty_struct *tty, unsigned int status) +{ + struct tty_port *port = &usb_port->port; + + dbg("%s - port %d, status %d", __func__, usb_port->number, status); + + if (status) + wake_up_interruptible(&port->open_wait); + else if (tty && !C_CLOCAL(tty)) + tty_hangup(tty); +} +EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change); + int usb_serial_generic_resume(struct usb_serial *serial) { struct usb_serial_port *port; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index cd769ef24f8..3b246d93cf2 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2889,8 +2889,8 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build); - edge_serial->product_info.FirmwareMajorVersion = fw->data[0]; - edge_serial->product_info.FirmwareMinorVersion = fw->data[1]; + edge_serial->product_info.FirmwareMajorVersion = rec->data[0]; + edge_serial->product_info.FirmwareMinorVersion = rec->data[1]; edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build); for (rec = ihex_next_binrec(rec); rec; diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 6ab2a3f97fe..178b22eb32b 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -199,6 +199,7 @@ static struct usb_serial_driver epic_device = { .name = "epic", }, .description = "EPiC device", + .usb_driver = &io_driver, .id_table = Epic_port_id_table, .num_ports = 1, .open = edge_open, diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 12ed594f5f8..99b97c04896 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -1275,6 +1275,7 @@ static struct usb_serial_driver iuu_device = { .name = "iuu_phoenix", }, .id_table = id_table, + .usb_driver = &iuu_driver, .num_ports = 1, .bulk_in_size = 512, .bulk_out_size = 512, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 2d8baf6ac47..ce134dc28dd 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -546,6 +546,7 @@ static struct usb_serial_driver keyspan_pre_device = { .name = "keyspan_no_firm", }, .description = "Keyspan - (without firmware)", + .usb_driver = &keyspan_driver, .id_table = keyspan_pre_ids, .num_ports = 1, .attach = keyspan_fake_startup, @@ -557,6 +558,7 @@ static struct usb_serial_driver keyspan_1port_device = { .name = "keyspan_1", }, .description = "Keyspan 1 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_1port_ids, .num_ports = 1, .open = keyspan_open, @@ -579,6 +581,7 @@ static struct usb_serial_driver keyspan_2port_device = { .name = "keyspan_2", }, .description = "Keyspan 2 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_2port_ids, .num_ports = 2, .open = keyspan_open, @@ -601,6 +604,7 @@ static struct usb_serial_driver keyspan_4port_device = { .name = "keyspan_4", }, .description = "Keyspan 4 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_4port_ids, .num_ports = 4, .open = keyspan_open, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index a10dd5676cc..554a8693a46 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -679,22 +679,6 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on) } } -static int keyspan_pda_carrier_raised(struct usb_serial_port *port) -{ - struct usb_serial *serial = port->serial; - unsigned char modembits; - - /* If we can read the modem status and the DCD is low then - carrier is not raised yet */ - if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) { - if (!(modembits & (1>>6))) - return 0; - } - /* Carrier raised, or we failed (eg disconnected) so - progress accordingly */ - return 1; -} - static int keyspan_pda_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -881,7 +865,6 @@ static struct usb_serial_driver keyspan_pda_device = { .id_table = id_table_std, .num_ports = 1, .dtr_rts = keyspan_pda_dtr_rts, - .carrier_raised = keyspan_pda_carrier_raised, .open = keyspan_pda_open, .close = keyspan_pda_close, .write = keyspan_pda_write, diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index cf1718394e1..653465f61d4 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -44,6 +44,7 @@ static struct usb_serial_driver moto_device = { .name = "moto-modem", }, .id_table = id_table, + .usb_driver = &moto_driver, .num_ports = 1, }; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 748778288d9..5f46838dfee 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -382,7 +382,16 @@ static void option_instat_callback(struct urb *urb); #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 -#define CINTERION_VENDOR_ID 0x0681 +/* Cinterion (formerly Siemens) products */ +#define SIEMENS_VENDOR_ID 0x0681 +#define CINTERION_VENDOR_ID 0x1e2d +#define CINTERION_PRODUCT_HC25_MDM 0x0047 +#define CINTERION_PRODUCT_HC25_MDMNET 0x0040 +#define CINTERION_PRODUCT_HC28_MDM 0x004C +#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */ +#define CINTERION_PRODUCT_EU3_E 0x0051 +#define CINTERION_PRODUCT_EU3_P 0x0052 +#define CINTERION_PRODUCT_PH8 0x0053 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -944,7 +953,17 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) }, { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)}, { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)}, - { USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) }, + /* Cinterion */ + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */ + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 5be866bb7a4..73613205be7 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -157,6 +157,7 @@ static struct usb_serial_driver oti6858_device = { .name = "oti6858", }, .id_table = id_table, + .usb_driver = &oti6858_driver, .num_ports = 1, .open = oti6858_open, .close = oti6858_close, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 8ae4c6cbc38..08c9181b8e4 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -50,6 +50,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, @@ -677,9 +678,11 @@ static void pl2303_update_line_status(struct usb_serial_port *port, { struct pl2303_private *priv = usb_get_serial_port_data(port); + struct tty_struct *tty; unsigned long flags; u8 status_idx = UART_STATE; u8 length = UART_STATE + 1; + u8 prev_line_status; u16 idv, idp; idv = le16_to_cpu(port->serial->dev->descriptor.idVendor); @@ -701,11 +704,20 @@ static void pl2303_update_line_status(struct usb_serial_port *port, /* Save off the uart status for others to look at */ spin_lock_irqsave(&priv->lock, flags); + prev_line_status = priv->line_status; priv->line_status = data[status_idx]; spin_unlock_irqrestore(&priv->lock, flags); if (priv->line_status & UART_BREAK_ERROR) usb_serial_handle_break(port); wake_up_interruptible(&priv->delta_msr_wait); + + tty = tty_port_tty_get(&port->port); + if (!tty) + return; + if ((priv->line_status ^ prev_line_status) & UART_DCD) + usb_serial_handle_dcd_change(port, tty, + priv->line_status & UART_DCD); + tty_kref_put(tty); } static void pl2303_read_int_callback(struct urb *urb) diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 43eb9bdad42..1b025f75daf 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -21,6 +21,7 @@ #define PL2303_PRODUCT_ID_MMX 0x0612 #define PL2303_PRODUCT_ID_GPRS 0x0609 #define PL2303_PRODUCT_ID_HCR331 0x331a +#define PL2303_PRODUCT_ID_MOTOROLA 0x0307 #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 214a3e50429..30b73e68a90 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -36,6 +36,7 @@ #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 +#define PANTECH_PRODUCT_UML290_VZW 0x3718 /* CMOTECH devices */ #define CMOTECH_VENDOR_ID 0x16d8 @@ -66,6 +67,7 @@ static struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); @@ -84,6 +86,7 @@ static struct usb_serial_driver qcaux_device = { .name = "qcaux", }, .id_table = id_table, + .usb_driver = &qcaux_driver, .num_ports = 1, }; diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c index cb8195cabfd..74cd4ccdb3f 100644 --- a/drivers/usb/serial/siemens_mpi.c +++ b/drivers/usb/serial/siemens_mpi.c @@ -42,6 +42,7 @@ static struct usb_serial_driver siemens_usb_mpi_device = { .name = "siemens_mpi", }, .id_table = id_table, + .usb_driver = &siemens_usb_mpi_driver, .num_ports = 1, }; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 765aa983bf5..cbfb70bffdd 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -133,7 +133,7 @@ struct spcp8x5_usb_ctrl_arg { /* how come ??? */ #define UART_STATE 0x08 -#define UART_STATE_TRANSIENT_MASK 0x74 +#define UART_STATE_TRANSIENT_MASK 0x75 #define UART_DCD 0x01 #define UART_DSR 0x02 #define UART_BREAK_ERROR 0x04 @@ -525,6 +525,10 @@ static void spcp8x5_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); + + if (status & UART_DCD) + usb_serial_handle_dcd_change(port, tty, + priv->line_status & MSR_STATUS_LINE_DCD); } tty_insert_flip_string_fixed_flag(tty, data, tty_flag, @@ -645,6 +649,7 @@ static struct usb_serial_driver spcp8x5_device = { .name = "SPCP8x5", }, .id_table = id_table, + .usb_driver = &spcp8x5_driver, .num_ports = 1, .open = spcp8x5_open, .dtr_rts = spcp8x5_dtr_rts, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index b2902f307b4..a910004f407 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -369,9 +369,9 @@ failed_1port: static void __exit ti_exit(void) { + usb_deregister(&ti_usb_driver); usb_serial_deregister(&ti_1port_device); usb_serial_deregister(&ti_2port_device); - usb_deregister(&ti_usb_driver); } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 6954de50c0f..546a52179be 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1344,11 +1344,15 @@ int usb_serial_register(struct usb_serial_driver *driver) return -ENODEV; fixup_generic(driver); - if (driver->usb_driver) - driver->usb_driver->supports_autosuspend = 1; if (!driver->description) driver->description = driver->driver.name; + if (!driver->usb_driver) { + WARN(1, "Serial driver %s has no usb_driver\n", + driver->description); + return -EINVAL; + } + driver->usb_driver->supports_autosuspend = 1; /* Add this device to our list of devices */ mutex_lock(&table_lock); diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index f2ed6a31be7..95a82148ee8 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -75,6 +75,7 @@ static struct usb_serial_driver debug_device = { .name = "debug", }, .id_table = id_table, + .usb_driver = &debug_driver, .num_ports = 1, .bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE, .break_ctl = usb_debug_break_ctl, diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h index c854fdebe0a..2c855302622 100644 --- a/drivers/usb/storage/unusual_cypress.h +++ b/drivers/usb/storage/unusual_cypress.h @@ -31,4 +31,9 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, "Cypress ISD-300LP", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), +UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999, + "Super Top", + "USB 2.0 SATA BRIDGE", + USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), + #endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fcc1e32ce25..c1602b8c559 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1044,6 +1044,15 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BULK32), +/* Reported by <ttkspam@free.fr> + * The device reports a vendor-specific device class, requiring an + * explicit vendor/product match. + */ +UNUSUAL_DEV( 0x0851, 0x1542, 0x0002, 0x0002, + "MagicPixel", + "FW_Omega2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), + /* Andrew Lunn <andrew@lunn.ch> * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL * on LUN 4. @@ -1388,6 +1397,13 @@ UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Submitted by Nick Holloway */ +UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100, + "VTech", + "Kidizoom", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Michael Stattmann <michael@stattmann.com> */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", @@ -1872,6 +1888,22 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_READ_DISC_INFO ), +/* Patch by Richard Schütz <r.schtz@t-online.de> + * This external hard drive enclosure uses a JMicron chip which + * needs the US_FL_IGNORE_RESIDUE flag to work properly. */ +UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000, + "TrekStor GmbH & Co. KG", + "DataStation maxi g.u", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), + +/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */ +UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000, + "Coby Electronics", + "MP3 Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), + UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, "ST", "2A", |