summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--drivers/usb/host/ehci-platform.c6
-rw-r--r--drivers/usb/phy/Kconfig10
-rw-r--r--drivers/usb/phy/phy-rcar-usb.c128
4 files changed, 94 insertions, 52 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 7d0aa5f58f7..2817013bceb 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -223,7 +223,7 @@ config USB_EHCI_SH
config USB_EHCI_S5P
tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on PLAT_S5P
+ depends on PLAT_S5P || ARCH_EXYNOS
help
Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's
on-chip EHCI controller.
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 5733f8ed98f..5196d728517 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -48,6 +48,12 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
ehci->big_endian_desc = pdata->big_endian_desc;
ehci->big_endian_mmio = pdata->big_endian_mmio;
+ if (pdata->pre_setup) {
+ retval = pdata->pre_setup(hcd);
+ if (retval < 0)
+ return retval;
+ }
+
ehci->caps = hcd->regs + pdata->caps_offset;
retval = ehci_setup(hcd);
if (retval)
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index a5a9552c25a..3622fff8b79 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -186,15 +186,15 @@ config USB_MXS_PHY
MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
config USB_RCAR_PHY
- tristate "Renesas R-Car USB phy support"
+ tristate "Renesas R-Car USB PHY support"
depends on USB || USB_GADGET
help
- Say Y here to add support for the Renesas R-Car USB phy driver.
- This chip is typically used as USB phy for USB host, gadget.
- This driver supports: R8A7779
+ Say Y here to add support for the Renesas R-Car USB common PHY driver.
+ This chip is typically used as USB PHY for USB host, gadget.
+ This driver supports R8A7778 and R8A7779.
To compile this driver as a module, choose M here: the
- module will be called rcar-phy.
+ module will be called phy-rcar-usb.
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c
index 23c3dd30b2f..ae909408958 100644
--- a/drivers/usb/phy/phy-rcar-usb.c
+++ b/drivers/usb/phy/phy-rcar-usb.c
@@ -1,8 +1,9 @@
/*
* Renesas R-Car USB phy driver
*
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,17 +16,41 @@
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/module.h>
-
-/* USBH common register */
-#define USBPCTRL0 0x0800
-#define USBPCTRL1 0x0804
-#define USBST 0x0808
-#define USBEH0 0x080C
-#define USBOH0 0x081C
-#define USBCTL0 0x0858
-#define EIIBC1 0x0094
-#define EIIBC2 0x009C
-
+#include <linux/platform_data/usb-rcar-phy.h>
+
+/* REGS block */
+#define USBPCTRL0 0x00
+#define USBPCTRL1 0x04
+#define USBST 0x08
+#define USBEH0 0x0C
+#define USBOH0 0x1C
+#define USBCTL0 0x58
+
+/* High-speed signal quality characteristic control registers (R8A7778 only) */
+#define HSQCTL1 0x24
+#define HSQCTL2 0x28
+
+/* USBPCTRL0 */
+#define OVC2 (1 << 10) /* (R8A7779 only) */
+ /* Switches the OVC input pin for port 2: */
+ /* 1: USB_OVC2, 0: OVC2 */
+#define OVC1_VBUS1 (1 << 9) /* Switches the OVC input pin for port 1: */
+ /* 1: USB_OVC1, 0: OVC1/VBUS1 */
+ /* Function mode: set to 0 */
+#define OVC0 (1 << 8) /* Switches the OVC input pin for port 0: */
+ /* 1: USB_OVC0 pin, 0: OVC0 */
+#define OVC2_ACT (1 << 6) /* (R8A7779 only) */
+ /* Host mode: OVC2 polarity: */
+ /* 1: active-high, 0: active-low */
+#define PENC (1 << 4) /* Function mode: output level of PENC1 pin: */
+ /* 1: high, 0: low */
+#define OVC0_ACT (1 << 3) /* Host mode: OVC0 polarity: */
+ /* 1: active-high, 0: active-low */
+#define OVC1_ACT (1 << 1) /* Host mode: OVC1 polarity: */
+ /* 1: active-high, 0: active-low */
+ /* Function mode: be sure to set to 1 */
+#define PORT1 (1 << 0) /* Selects port 1 mode: */
+ /* 1: function, 0: host */
/* USBPCTRL1 */
#define PHY_RST (1 << 2)
#define PLL_ENB (1 << 1)
@@ -58,8 +83,10 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
{
struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
struct device *dev = phy->dev;
+ struct rcar_phy_platform_data *pdata = dev->platform_data;
void __iomem *reg0 = priv->reg0;
void __iomem *reg1 = priv->reg1;
+ static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT };
int i;
u32 val;
unsigned long flags;
@@ -77,7 +104,16 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
/* (2) start USB-PHY internal PLL */
iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1));
- /* (3) USB module status check */
+ /* (3) set USB-PHY in accord with the conditions of usage */
+ if (reg1) {
+ u32 hsqctl1 = pdata->ferrite_bead ? 0x41 : 0;
+ u32 hsqctl2 = pdata->ferrite_bead ? 0x0d : 7;
+
+ iowrite32(hsqctl1, reg1 + HSQCTL1);
+ iowrite32(hsqctl2, reg1 + HSQCTL2);
+ }
+
+ /* (4) USB module status check */
for (i = 0; i < 1024; i++) {
udelay(10);
val = ioread32(reg0 + USBST);
@@ -90,24 +126,24 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
goto phy_init_end;
}
- /* (4) USB-PHY reset clear */
+ /* (5) USB-PHY reset clear */
iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
- /* set platform specific port settings */
- iowrite32(0x00000000, (reg0 + USBPCTRL0));
-
- /*
- * EHCI IP internal buffer setting
- * EHCI IP internal buffer enable
- *
- * These are recommended value of a datasheet
- * see [USB :: EHCI internal buffer setting]
- */
- iowrite32(0x00ff0040, (reg0 + EIIBC1));
- iowrite32(0x00ff0040, (reg1 + EIIBC1));
-
- iowrite32(0x00000001, (reg0 + EIIBC2));
- iowrite32(0x00000001, (reg1 + EIIBC2));
+ /* Board specific port settings */
+ val = 0;
+ if (pdata->port1_func)
+ val |= PORT1;
+ if (pdata->penc1)
+ val |= PENC;
+ for (i = 0; i < 3; i++) {
+ /* OVCn bits follow each other in the right order */
+ if (pdata->ovc_pin[i].select_3_3v)
+ val |= OVC0 << i;
+ /* OVCn_ACT bits are spaced by irregular intervals */
+ if (pdata->ovc_pin[i].active_high)
+ val |= ovcn_act[i];
+ }
+ iowrite32(val, (reg0 + USBPCTRL0));
/*
* Bus alignment settings
@@ -134,10 +170,8 @@ static void rcar_usb_phy_shutdown(struct usb_phy *phy)
spin_lock_irqsave(&priv->lock, flags);
- if (priv->counter-- == 1) { /* last user */
- iowrite32(0x00000000, (reg0 + USBPCTRL0));
+ if (priv->counter-- == 1) /* last user */
iowrite32(0x00000000, (reg0 + USBPCTRL1));
- }
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -147,27 +181,29 @@ static int rcar_usb_phy_probe(struct platform_device *pdev)
struct rcar_usb_phy_priv *priv;
struct resource *res0, *res1;
struct device *dev = &pdev->dev;
- void __iomem *reg0, *reg1;
+ void __iomem *reg0, *reg1 = NULL;
int ret;
+ if (!pdev->dev.platform_data) {
+ dev_err(dev, "No platform data\n");
+ return -EINVAL;
+ }
+
res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res0 || !res1) {
+ if (!res0) {
dev_err(dev, "Not enough platform resources\n");
return -EINVAL;
}
- /*
- * CAUTION
- *
- * Because this phy address is also mapped under OHCI/EHCI address area,
- * this driver can't use devm_ioremap_resource(dev, res) here
- */
- reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0));
- reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1));
- if (!reg0 || !reg1) {
- dev_err(dev, "ioremap error\n");
- return -ENOMEM;
+ reg0 = devm_ioremap_resource(dev, res0);
+ if (IS_ERR(reg0))
+ return PTR_ERR(reg0);
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res1) {
+ reg1 = devm_ioremap_resource(dev, res1);
+ if (IS_ERR(reg1))
+ return PTR_ERR(reg1);
}
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-26 05:48:38 +0000