summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/ehci-au1xxx.c16
-rw-r--r--drivers/usb/host/ehci-fsl.c2
-rw-r--r--drivers/usb/host/ehci-hub.c173
-rw-r--r--drivers/usb/host/ehci-pci.c15
-rw-r--r--drivers/usb/host/ehci.h10
5 files changed, 145 insertions, 71 deletions
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 7a27b7c4ee8..faa61748db7 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -224,26 +224,17 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
msleep(10);
/* Root hub was already suspended. Disable irq emission and
- * mark HW unaccessible, bail out if RH has been resumed. Use
- * the spinlock to properly synchronize with possible pending
- * RH suspend or resume activity.
- *
- * This is still racy as hcd->state is manipulated outside of
- * any locks =P But that will be a different fix.
+ * mark HW unaccessible. The PM and USB cores make sure that
+ * the root hub is either suspended or stopped.
*/
spin_lock_irqsave(&ehci->lock, flags);
- if (hcd->state != HC_STATE_SUSPENDED) {
- rc = -EINVAL;
- goto bail;
- }
+ ehci_prepare_ports_for_controller_suspend(ehci);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
au1xxx_stop_ehc();
-
-bail:
spin_unlock_irqrestore(&ehci->lock, flags);
// could save FLADJ in case of Vaux power loss
@@ -273,6 +264,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
int mask = INTR_MASK;
+ ehci_prepare_ports_for_controller_resume(ehci);
if (!hcd->self.root_hub->do_remote_wakeup)
mask &= ~STS_PCD;
ehci_writel(ehci, mask, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 0e26aa13f15..5cd967d2893 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -313,6 +313,7 @@ static int ehci_fsl_drv_suspend(struct device *dev)
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
void __iomem *non_ehci = hcd->regs;
+ ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd));
if (!fsl_deep_sleep())
return 0;
@@ -327,6 +328,7 @@ static int ehci_fsl_drv_resume(struct device *dev)
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
void __iomem *non_ehci = hcd->regs;
+ ehci_prepare_ports_for_controller_resume(ehci);
if (!fsl_deep_sleep())
return 0;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index ef956220f85..e7d3d8def28 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -106,12 +106,75 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
ehci->owned_ports = 0;
}
+static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
+ bool suspending)
+{
+ int port;
+ u32 temp;
+
+ /* If remote wakeup is enabled for the root hub but disabled
+ * for the controller, we must adjust all the port wakeup flags
+ * when the controller is suspended or resumed. In all other
+ * cases they don't need to be changed.
+ */
+ if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup ||
+ device_may_wakeup(ehci_to_hcd(ehci)->self.controller))
+ return;
+
+ /* clear phy low-power mode before changing wakeup flags */
+ if (ehci->has_hostpc) {
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ u32 __iomem *hostpc_reg;
+
+ hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
+ + HOSTPC0 + 4 * port);
+ temp = ehci_readl(ehci, hostpc_reg);
+ ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
+ }
+ msleep(5);
+ }
+
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ u32 __iomem *reg = &ehci->regs->port_status[port];
+ u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+ u32 t2 = t1 & ~PORT_WAKE_BITS;
+
+ /* If we are suspending the controller, clear the flags.
+ * If we are resuming the controller, set the wakeup flags.
+ */
+ if (!suspending) {
+ if (t1 & PORT_CONNECT)
+ t2 |= PORT_WKOC_E | PORT_WKDISC_E;
+ else
+ t2 |= PORT_WKOC_E | PORT_WKCONN_E;
+ }
+ ehci_vdbg(ehci, "port %d, %08x -> %08x\n",
+ port + 1, t1, t2);
+ ehci_writel(ehci, t2, reg);
+ }
+
+ /* enter phy low-power mode again */
+ if (ehci->has_hostpc) {
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ u32 __iomem *hostpc_reg;
+
+ hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
+ + HOSTPC0 + 4 * port);
+ temp = ehci_readl(ehci, hostpc_reg);
+ ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
+ }
+ }
+}
+
static int ehci_bus_suspend (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int port;
int mask;
- u32 __iomem *hostpc_reg = NULL;
+ int changed;
ehci_dbg(ehci, "suspend root hub\n");
@@ -155,15 +218,13 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
*/
ehci->bus_suspended = 0;
ehci->owned_ports = 0;
+ changed = 0;
port = HCS_N_PORTS(ehci->hcs_params);
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
- u32 t2 = t1;
+ u32 t2 = t1 & ~PORT_WAKE_BITS;
- if (ehci->has_hostpc)
- hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs
- + HOSTPC0 + 4 * (port & 0xff));
/* keep track of which ports we suspend */
if (t1 & PORT_OWNER)
set_bit(port, &ehci->owned_ports);
@@ -172,40 +233,45 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
set_bit(port, &ehci->bus_suspended);
}
- /* enable remote wakeup on all ports */
+ /* enable remote wakeup on all ports, if told to do so */
if (hcd->self.root_hub->do_remote_wakeup) {
/* only enable appropriate wake bits, otherwise the
* hardware can not go phy low power mode. If a race
* condition happens here(connection change during bits
* set), the port change detection will finally fix it.
*/
- if (t1 & PORT_CONNECT) {
+ if (t1 & PORT_CONNECT)
t2 |= PORT_WKOC_E | PORT_WKDISC_E;
- t2 &= ~PORT_WKCONN_E;
- } else {
+ else
t2 |= PORT_WKOC_E | PORT_WKCONN_E;
- t2 &= ~PORT_WKDISC_E;
- }
- } else
- t2 &= ~PORT_WAKE_BITS;
+ }
if (t1 != t2) {
ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
port + 1, t1, t2);
ehci_writel(ehci, t2, reg);
- if (hostpc_reg) {
- u32 t3;
+ changed = 1;
+ }
+ }
- spin_unlock_irq(&ehci->lock);
- msleep(5);/* 5ms for HCD enter low pwr mode */
- spin_lock_irq(&ehci->lock);
- t3 = ehci_readl(ehci, hostpc_reg);
- ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
- t3 = ehci_readl(ehci, hostpc_reg);
- ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
+ if (changed && ehci->has_hostpc) {
+ spin_unlock_irq(&ehci->lock);
+ msleep(5); /* 5 ms for HCD to enter low-power mode */
+ spin_lock_irq(&ehci->lock);
+
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ u32 __iomem *hostpc_reg;
+ u32 t3;
+
+ hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
+ + HOSTPC0 + 4 * port);
+ t3 = ehci_readl(ehci, hostpc_reg);
+ ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
+ t3 = ehci_readl(ehci, hostpc_reg);
+ ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
port, (t3 & HOSTPC_PHCD) ?
"succeeded" : "failed");
- }
}
}
@@ -291,19 +357,28 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
msleep(8);
spin_lock_irq(&ehci->lock);
+ /* clear phy low-power mode before resume */
+ if (ehci->bus_suspended && ehci->has_hostpc) {
+ i = HCS_N_PORTS(ehci->hcs_params);
+ while (i--) {
+ if (test_bit(i, &ehci->bus_suspended)) {
+ u32 __iomem *hostpc_reg;
+
+ hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
+ + HOSTPC0 + 4 * i);
+ temp = ehci_readl(ehci, hostpc_reg);
+ ehci_writel(ehci, temp & ~HOSTPC_PHCD,
+ hostpc_reg);
+ }
+ }
+ spin_unlock_irq(&ehci->lock);
+ msleep(5);
+ spin_lock_irq(&ehci->lock);
+ }
+
/* manually resume the ports we suspended during bus_suspend() */
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
- /* clear phy low power mode before resume */
- if (ehci->has_hostpc) {
- u32 __iomem *hostpc_reg =
- (u32 __iomem *)((u8 *)ehci->regs
- + HOSTPC0 + 4 * (i & 0xff));
- temp = ehci_readl(ehci, hostpc_reg);
- ehci_writel(ehci, temp & ~HOSTPC_PHCD,
- hostpc_reg);
- mdelay(5);
- }
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
if (test_bit(i, &ehci->bus_suspended) &&
@@ -685,23 +760,25 @@ static int ehci_hub_control (
goto error;
if (ehci->no_selective_suspend)
break;
- if (temp & PORT_SUSPEND) {
- if ((temp & PORT_PE) == 0)
- goto error;
- /* clear phy low power mode before resume */
- if (hostpc_reg) {
- temp1 = ehci_readl(ehci, hostpc_reg);
- ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
+ if (!(temp & PORT_SUSPEND))
+ break;
+ if ((temp & PORT_PE) == 0)
+ goto error;
+
+ /* clear phy low-power mode before resume */
+ if (hostpc_reg) {
+ temp1 = ehci_readl(ehci, hostpc_reg);
+ ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
hostpc_reg);
- mdelay(5);
- }
- /* resume signaling for 20 msec */
- temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
- ehci_writel(ehci, temp | PORT_RESUME,
- status_reg);
- ehci->reset_done [wIndex] = jiffies
- + msecs_to_jiffies (20);
+ spin_unlock_irqrestore(&ehci->lock, flags);
+ msleep(5);/* wait to leave low-power mode */
+ spin_lock_irqsave(&ehci->lock, flags);
}
+ /* resume signaling for 20 msec */
+ temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+ ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+ ehci->reset_done[wIndex] = jiffies
+ + msecs_to_jiffies(20);
break;
case USB_PORT_FEAT_C_SUSPEND:
clear_bit(wIndex, &ehci->port_c_suspend);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index d120059bbbf..d43d176161a 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -287,23 +287,15 @@ static int ehci_pci_suspend(struct usb_hcd *hcd)
msleep(10);
/* Root hub was already suspended. Disable irq emission and
- * mark HW unaccessible, bail out if RH has been resumed. Use
- * the spinlock to properly synchronize with possible pending
- * RH suspend or resume activity.
- *
- * This is still racy as hcd->state is manipulated outside of
- * any locks =P But that will be a different fix.
+ * mark HW unaccessible. The PM and USB cores make sure that
+ * the root hub is either suspended or stopped.
*/
spin_lock_irqsave (&ehci->lock, flags);
- if (hcd->state != HC_STATE_SUSPENDED) {
- rc = -EINVAL;
- goto bail;
- }
+ ehci_prepare_ports_for_controller_suspend(ehci);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- bail:
spin_unlock_irqrestore (&ehci->lock, flags);
// could save FLADJ in case of Vaux power loss
@@ -333,6 +325,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
!hibernated) {
int mask = INTR_MASK;
+ ehci_prepare_ports_for_controller_resume(ehci);
if (!hcd->self.root_hub->do_remote_wakeup)
mask &= ~STS_PCD;
ehci_writel(ehci, mask, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 4ebe9ad209e..650a687f285 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -536,6 +536,16 @@ struct ehci_fstn {
/*-------------------------------------------------------------------------*/
+/* Prepare the PORTSC wakeup flags during controller suspend/resume */
+
+#define ehci_prepare_ports_for_controller_suspend(ehci) \
+ ehci_adjust_port_wakeup_flags(ehci, true);
+
+#define ehci_prepare_ports_for_controller_resume(ehci) \
+ ehci_adjust_port_wakeup_flags(ehci, false);
+
+/*-------------------------------------------------------------------------*/
+
#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
/*
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-22 06:09:58 +0000