diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/gadget/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/usb/gadget/m66592-udc.c | 284 | ||||
| -rw-r--r-- | drivers/usb/gadget/m66592-udc.h | 90 | ||||
| -rw-r--r-- | drivers/usb/host/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/usb/host/r8a66597-hcd.c | 210 | ||||
| -rw-r--r-- | drivers/usb/host/r8a66597.h | 440 |
6 files changed, 358 insertions, 683 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 7f8e83a954a..b7f10bc25c2 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -360,16 +360,6 @@ config USB_M66592 default USB_GADGET select USB_GADGET_SELECTED -config SUPERH_BUILT_IN_M66592 - boolean "Enable SuperH built-in USB like the M66592" - depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722 - help - SH7722 has USB like the M66592. - - The transfer rate is very slow when use "Ethernet Gadget". - However, this problem is improved if change a value of - NET_IP_ALIGN to 4. - # # Controllers available only in discrete form (and all PCI controllers) # diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 43dcf9e1af6..a61c70caff1 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -31,38 +31,12 @@ #include "m66592-udc.h" - MODULE_DESCRIPTION("M66592 USB gadget driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Yoshihiro Shimoda"); MODULE_ALIAS("platform:m66592_udc"); -#define DRIVER_VERSION "18 Oct 2007" - -/* module parameters */ -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) -static unsigned short endian = M66592_LITTLE; -module_param(endian, ushort, 0644); -MODULE_PARM_DESC(endian, "data endian: big=0, little=0 (default=0)"); -#else -static unsigned short clock = M66592_XTAL24; -module_param(clock, ushort, 0644); -MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 " - "(default=16384)"); - -static unsigned short vif = M66592_LDRV; -module_param(vif, ushort, 0644); -MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0 (default=32768)"); - -static unsigned short endian; -module_param(endian, ushort, 0644); -MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)"); - -static unsigned short irq_sense = M66592_INTL; -module_param(irq_sense, ushort, 0644); -MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=2, falling edge=0 " - "(default=2)"); -#endif +#define DRIVER_VERSION "21 July 2009" static const char udc_name[] = "m66592_udc"; static const char *m66592_ep_name[] = { @@ -244,6 +218,7 @@ static inline int get_buffer_size(struct m66592 *m66592, u16 pipenum) static inline void pipe_change(struct m66592 *m66592, u16 pipenum) { struct m66592_ep *ep = m66592->pipenum2ep[pipenum]; + unsigned short mbw; if (ep->use_dma) return; @@ -252,7 +227,12 @@ static inline void pipe_change(struct m66592 *m66592, u16 pipenum) ndelay(450); - m66592_bset(m66592, M66592_MBW, ep->fifosel); + if (m66592->pdata->on_chip) + mbw = M66592_MBW_32; + else + mbw = M66592_MBW_16; + + m66592_bset(m66592, mbw, ep->fifosel); } static int pipe_buffer_setting(struct m66592 *m66592, @@ -276,24 +256,27 @@ static int pipe_buffer_setting(struct m66592 *m66592, buf_bsize = 0; break; case M66592_BULK: - bufnum = m66592->bi_bufnum + - (info->pipe - M66592_BASE_PIPENUM_BULK) * 16; - m66592->bi_bufnum += 16; + /* isochronous pipes may be used as bulk pipes */ + if (info->pipe > M66592_BASE_PIPENUM_BULK) + bufnum = info->pipe - M66592_BASE_PIPENUM_BULK; + else + bufnum = info->pipe - M66592_BASE_PIPENUM_ISOC; + + bufnum = M66592_BASE_BUFNUM + (bufnum * 16); buf_bsize = 7; pipecfg |= M66592_DBLB; if (!info->dir_in) pipecfg |= M66592_SHTNAK; break; case M66592_ISO: - bufnum = m66592->bi_bufnum + + bufnum = M66592_BASE_BUFNUM + (info->pipe - M66592_BASE_PIPENUM_ISOC) * 16; - m66592->bi_bufnum += 16; buf_bsize = 7; break; } - if (m66592->bi_bufnum > M66592_MAX_BUFNUM) { - pr_err("m66592 pipe memory is insufficient(%d)\n", - m66592->bi_bufnum); + + if (buf_bsize && ((bufnum + 16) >= M66592_MAX_BUFNUM)) { + pr_err("m66592 pipe memory is insufficient\n"); return -ENOMEM; } @@ -313,17 +296,6 @@ static void pipe_buffer_release(struct m66592 *m66592, if (info->pipe == 0) return; - switch (info->type) { - case M66592_BULK: - if (is_bulk_pipe(info->pipe)) - m66592->bi_bufnum -= 16; - break; - case M66592_ISO: - if (is_isoc_pipe(info->pipe)) - m66592->bi_bufnum -= 16; - break; - } - if (is_bulk_pipe(info->pipe)) { m66592->bulk--; } else if (is_interrupt_pipe(info->pipe)) @@ -340,6 +312,7 @@ static void pipe_buffer_release(struct m66592 *m66592, static void pipe_initialize(struct m66592_ep *ep) { struct m66592 *m66592 = ep->m66592; + unsigned short mbw; m66592_mdfy(m66592, 0, M66592_CURPIPE, ep->fifosel); @@ -351,7 +324,12 @@ static void pipe_initialize(struct m66592_ep *ep) ndelay(450); - m66592_bset(m66592, M66592_MBW, ep->fifosel); + if (m66592->pdata->on_chip) + mbw = M66592_MBW_32; + else + mbw = M66592_MBW_16; + + m66592_bset(m66592, mbw, ep->fifosel); } } @@ -367,15 +345,13 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, ep->fifosel = M66592_D0FIFOSEL; ep->fifoctr = M66592_D0FIFOCTR; ep->fifotrn = M66592_D0FIFOTRN; -#if !defined(CONFIG_SUPERH_BUILT_IN_M66592) - } else if (m66592->num_dma == 1) { + } else if (!m66592->pdata->on_chip && m66592->num_dma == 1) { m66592->num_dma++; ep->use_dma = 1; ep->fifoaddr = M66592_D1FIFO; ep->fifosel = M66592_D1FIFOSEL; ep->fifoctr = M66592_D1FIFOCTR; ep->fifotrn = M66592_D1FIFOTRN; -#endif } else { ep->use_dma = 0; ep->fifoaddr = M66592_CFIFO; @@ -620,76 +596,120 @@ static void start_ep0(struct m66592_ep *ep, struct m66592_request *req) } } -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) static void init_controller(struct m66592 *m66592) { - m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ - m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); - m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); - m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + unsigned int endian; - /* This is a workaound for SH7722 2nd cut */ - m66592_bset(m66592, 0x8000, M66592_DVSTCTR); - m66592_bset(m66592, 0x1000, M66592_TESTMODE); - m66592_bclr(m66592, 0x8000, M66592_DVSTCTR); + if (m66592->pdata->on_chip) { + if (m66592->pdata->endian) + endian = 0; /* big endian */ + else + endian = M66592_LITTLE; /* little endian */ - m66592_bset(m66592, M66592_INTL, M66592_INTENB1); + m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ + m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); - m66592_write(m66592, 0, M66592_CFBCFG); - m66592_write(m66592, 0, M66592_D0FBCFG); - m66592_bset(m66592, endian, M66592_CFBCFG); - m66592_bset(m66592, endian, M66592_D0FBCFG); -} -#else /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ -static void init_controller(struct m66592 *m66592) -{ - m66592_bset(m66592, (vif & M66592_LDRV) | (endian & M66592_BIGEND), - M66592_PINCFG); - m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ - m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL, M66592_SYSCFG); + /* This is a workaound for SH7722 2nd cut */ + m66592_bset(m66592, 0x8000, M66592_DVSTCTR); + m66592_bset(m66592, 0x1000, M66592_TESTMODE); + m66592_bclr(m66592, 0x8000, M66592_DVSTCTR); - m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); - m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); - m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bset(m66592, M66592_INTL, M66592_INTENB1); - m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); + m66592_write(m66592, 0, M66592_CFBCFG); + m66592_write(m66592, 0, M66592_D0FBCFG); + m66592_bset(m66592, endian, M66592_CFBCFG); + m66592_bset(m66592, endian, M66592_D0FBCFG); + } else { + unsigned int clock, vif, irq_sense; - msleep(3); + if (m66592->pdata->endian) + endian = M66592_BIGEND; /* big endian */ + else + endian = 0; /* little endian */ - m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG); + if (m66592->pdata->vif) + vif = M66592_LDRV; /* 3.3v */ + else + vif = 0; /* 1.5v */ - msleep(1); + switch (m66592->pdata->xtal) { + case M66592_PLATDATA_XTAL_12MHZ: + clock = M66592_XTAL12; + break; + case M66592_PLATDATA_XTAL_24MHZ: + clock = M66592_XTAL24; + break; + case M66592_PLATDATA_XTAL_48MHZ: + clock = M66592_XTAL48; + break; + default: + pr_warning("m66592-udc: xtal configuration error\n"); + clock = 0; + } - m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG); + switch (m66592->irq_trigger) { + case IRQF_TRIGGER_LOW: + irq_sense = M66592_INTL; + break; + case IRQF_TRIGGER_FALLING: + irq_sense = 0; + break; + default: + pr_warning("m66592-udc: irq trigger config error\n"); + irq_sense = 0; + } + + m66592_bset(m66592, + (vif & M66592_LDRV) | (endian & M66592_BIGEND), + M66592_PINCFG); + m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ + m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL, + M66592_SYSCFG); + m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + + m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); + + msleep(3); - m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1); - m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR, - M66592_DMA0CFG); + m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG); + + msleep(1); + + m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG); + + m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1); + m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR, + M66592_DMA0CFG); + } } -#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ static void disable_controller(struct m66592 *m66592) { -#if !defined(CONFIG_SUPERH_BUILT_IN_M66592) - m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG); - udelay(1); - m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG); - udelay(1); - m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG); - udelay(1); - m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG); -#endif + if (!m66592->pdata->on_chip) { + m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG); + udelay(1); + m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG); + udelay(1); + m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG); + udelay(1); + m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG); + } } static void m66592_start_xclock(struct m66592 *m66592) { -#if !defined(CONFIG_SUPERH_BUILT_IN_M66592) u16 tmp; - tmp = m66592_read(m66592, M66592_SYSCFG); - if (!(tmp & M66592_XCKE)) - m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); -#endif + if (!m66592->pdata->on_chip) { + tmp = m66592_read(m66592, M66592_SYSCFG); + if (!(tmp & M66592_XCKE)) + m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); + } } /*-------------------------------------------------------------------------*/ @@ -1177,8 +1197,7 @@ static irqreturn_t m66592_irq(int irq, void *_m66592) intsts0 = m66592_read(m66592, M66592_INTSTS0); intenb0 = m66592_read(m66592, M66592_INTENB0); -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) - if (!intsts0 && !intenb0) { + if (m66592->pdata->on_chip && !intsts0 && !intenb0) { /* * When USB clock stops, it cannot read register. Even if a * clock stops, the interrupt occurs. So this driver turn on @@ -1188,7 +1207,6 @@ static irqreturn_t m66592_irq(int irq, void *_m66592) intsts0 = m66592_read(m66592, M66592_INTSTS0); intenb0 = m66592_read(m66592, M66592_INTENB0); } -#endif savepipe = m66592_read(m66592, M66592_CFIFOSEL); @@ -1534,9 +1552,11 @@ static int __exit m66592_remove(struct platform_device *pdev) iounmap(m66592->reg); free_irq(platform_get_irq(pdev, 0), m66592); m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) - clk_disable(m66592->clk); - clk_put(m66592->clk); +#ifdef CONFIG_HAVE_CLK + if (m66592->pdata->on_chip) { + clk_disable(m66592->clk); + clk_put(m66592->clk); + } #endif kfree(m66592); return 0; @@ -1548,11 +1568,10 @@ static void nop_completion(struct usb_ep *ep, struct usb_request *r) static int __init m66592_probe(struct platform_device *pdev) { - struct resource *res; - int irq; + struct resource *res, *ires; void __iomem *reg = NULL; struct m66592 *m66592 = NULL; -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK char clk_name[8]; #endif int ret = 0; @@ -1565,10 +1584,11 @@ static int __init m66592_probe(struct platform_device *pdev) goto clean_up; } - irq = platform_get_irq(pdev, 0); - if (irq < 0) { + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { ret = -ENODEV; - pr_err("platform_get_irq error.\n"); + dev_err(&pdev->dev, + "platform_get_resource IORESOURCE_IRQ error.\n"); goto clean_up; } @@ -1579,6 +1599,12 @@ static int __init m66592_probe(struct platform_device *pdev) goto clean_up; } + if (pdev->dev.platform_data == NULL) { + dev_err(&pdev->dev, "no platform data\n"); + ret = -ENODEV; + goto clean_up; + } + /* initialize ucd */ m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL); if (m66592 == NULL) { @@ -1586,6 +1612,9 @@ static int __init m66592_probe(struct platform_device *pdev) goto clean_up; } + m66592->pdata = pdev->dev.platform_data; + m66592->irq_trigger = ires->flags & IRQF_TRIGGER_MASK; + spin_lock_init(&m66592->lock); dev_set_drvdata(&pdev->dev, m66592); @@ -1603,24 +1632,25 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->timer.data = (unsigned long)m66592; m66592->reg = reg; - m66592->bi_bufnum = M66592_BASE_BUFNUM; - - ret = request_irq(irq, m66592_irq, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(ires->start, m66592_irq, IRQF_DISABLED | IRQF_SHARED, udc_name, m66592); if (ret < 0) { pr_err("request_irq error (%d)\n", ret); goto clean_up; } -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) - snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id); - m66592->clk = clk_get(&pdev->dev, clk_name); - if (IS_ERR(m66592->clk)) { - dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); - ret = PTR_ERR(m66592->clk); - goto clean_up2; +#ifdef CONFIG_HAVE_CLK + if (m66592->pdata->on_chip) { + snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id); + m66592->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(m66592->clk)) { + dev_err(&pdev->dev, "cannot get clock \"%s\"\n", + clk_name); + ret = PTR_ERR(m66592->clk); + goto clean_up2; + } + clk_enable(m66592->clk); } - clk_enable(m66592->clk); #endif INIT_LIST_HEAD(&m66592->gadget.ep_list); m66592->gadget.ep0 = &m66592->ep[0].ep; @@ -1662,12 +1692,14 @@ static int __init m66592_probe(struct platform_device *pdev) return 0; clean_up3: -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) - clk_disable(m66592->clk); - clk_put(m66592->clk); +#ifdef CONFIG_HAVE_CLK + if (m66592->pdata->on_chip) { + clk_disable(m66592->clk); + clk_put(m66592->clk); + } clean_up2: #endif - free_irq(irq, m66592); + free_irq(ires->start, m66592); clean_up: if (m66592) { if (m66592->ep0_req) diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h index 286ce07e796..8b960deed68 100644 --- a/drivers/usb/gadget/m66592-udc.h +++ b/drivers/usb/gadget/m66592-udc.h @@ -23,10 +23,12 @@ #ifndef __M66592_UDC_H__ #define __M66592_UDC_H__ -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK #include <linux/clk.h> #endif +#include <linux/usb/m66592.h> + #define M66592_SYSCFG 0x00 #define M66592_XTAL 0xC000 /* b15-14: Crystal selection */ #define M66592_XTAL48 0x8000 /* 48MHz */ @@ -76,11 +78,11 @@ #define M66592_P_TST_J 0x0001 /* PERI TEST J */ #define M66592_P_TST_NORMAL 0x0000 /* PERI Normal Mode */ -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) +/* built-in registers */ #define M66592_CFBCFG 0x0A #define M66592_D0FBCFG 0x0C #define M66592_LITTLE 0x0100 /* b8: Little endian mode */ -#else +/* external chip case */ #define M66592_PINCFG 0x0A #define M66592_LDRV 0x8000 /* b15: Drive Current Adjust */ #define M66592_BIGEND 0x0100 /* b8: Big endian mode */ @@ -100,8 +102,8 @@ #define M66592_PKTM 0x0020 /* b5: Packet mode */ #define M66592_DENDE 0x0010 /* b4: Dend enable */ #define M66592_OBUS 0x0004 /* b2: OUTbus mode */ -#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ +/* common case */ #define M66592_CFIFO 0x10 #define M66592_D0FIFO 0x14 #define M66592_D1FIFO 0x18 @@ -113,13 +115,9 @@ #define M66592_REW 0x4000 /* b14: Buffer rewind */ #define M66592_DCLRM 0x2000 /* b13: DMA buffer clear mode */ #define M66592_DREQE 0x1000 /* b12: DREQ output enable */ -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) -#define M66592_MBW 0x0800 /* b11: Maximum bit width for FIFO */ -#else -#define M66592_MBW 0x0400 /* b10: Maximum bit width for FIFO */ -#define M66592_MBW_8 0x0000 /* 8bit */ -#define M66592_MBW_16 0x0400 /* 16bit */ -#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ +#define M66592_MBW_8 0x0000 /* 8bit */ +#define M66592_MBW_16 0x0400 /* 16bit */ +#define M66592_MBW_32 0x0800 /* 32bit */ #define M66592_TRENB 0x0200 /* b9: Transaction counter enable */ #define M66592_TRCLR 0x0100 /* b8: Transaction counter clear */ #define M66592_DEZPM 0x0080 /* b7: Zero-length packet mode */ @@ -480,9 +478,11 @@ struct m66592_ep { struct m66592 { spinlock_t lock; void __iomem *reg; -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK struct clk *clk; #endif + struct m66592_platdata *pdata; + unsigned long irq_trigger; struct usb_gadget gadget; struct usb_gadget_driver *driver; @@ -506,7 +506,6 @@ struct m66592 { int interrupt; int isochronous; int num_dma; - int bi_bufnum; /* bulk and isochronous's bufnum */ }; #define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget) @@ -547,13 +546,13 @@ static inline void m66592_read_fifo(struct m66592 *m66592, { unsigned long fifoaddr = (unsigned long)m66592->reg + offset; -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) - len = (len + 3) / 4; - insl(fifoaddr, buf, len); -#else - len = (len + 1) / 2; - insw(fifoaddr, buf, len); -#endif + if (m66592->pdata->on_chip) { + len = (len + 3) / 4; + insl(fifoaddr, buf, len); + } else { + len = (len + 1) / 2; + insw(fifoaddr, buf, len); + } } static inline void m66592_write(struct m66592 *m66592, u16 val, @@ -567,33 +566,34 @@ static inline void m66592_write_fifo(struct m66592 *m66592, void *buf, unsigned long len) { unsigned long fifoaddr = (unsigned long)m66592->reg + offset; -#if defined(CONFIG_SUPERH_BUILT_IN_M66592) - unsigned long count; - unsigned char *pb; - int i; - - count = len / 4; - outsl(fifoaddr, buf, count); - - if (len & 0x00000003) { - pb = buf + count * 4; - for (i = 0; i < (len & 0x00000003); i++) { - if (m66592_read(m66592, M66592_CFBCFG)) /* little */ - outb(pb[i], fifoaddr + (3 - i)); - else - outb(pb[i], fifoaddr + i); + + if (m66592->pdata->on_chip) { + unsigned long count; + unsigned char *pb; + int i; + + count = len / 4; + outsl(fifoaddr, buf, count); + + if (len & 0x00000003) { + pb = buf + count * 4; + for (i = 0; i < (len & 0x00000003); i++) { + if (m66592_read(m66592, M66592_CFBCFG)) /* le */ + outb(pb[i], fifoaddr + (3 - i)); + else + outb(pb[i], fifoaddr + i); + } + } + } else { + unsigned long odd = len & 0x0001; + + len = len / 2; + outsw(fifoaddr, buf, len); + if (odd) { + unsigned char *p = buf + len*2; + outb(*p, fifoaddr); } } -#else - unsigned long odd = len & 0x0001; - - len = len / 2; - outsw(fifoaddr, buf, len); - if (odd) { - unsigned char *p = buf + len*2; - outb(*p, fifoaddr); - } -#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ } static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat, diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1a920c70b5a..f21ca7d27a4 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -336,13 +336,6 @@ config USB_R8A66597_HCD To compile this driver as a module, choose M here: the module will be called r8a66597-hcd. -config SUPERH_ON_CHIP_R8A66597 - boolean "Enable SuperH on-chip R8A66597 USB" - depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724) - help - This driver enables support for the on-chip R8A66597 in the - SH7366, SH7723 and SH7724 processors. - config USB_WHCI_HCD tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" depends on EXPERIMENTAL diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index e18f74946e6..749b5374282 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -91,43 +91,43 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597) u16 tmp; int i = 0; -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) -#if defined(CONFIG_HAVE_CLK) - clk_enable(r8a66597->clk); + if (r8a66597->pdata->on_chip) { +#ifdef CONFIG_HAVE_CLK + clk_enable(r8a66597->clk); #endif - do { - r8a66597_write(r8a66597, SCKE, SYSCFG0); - tmp = r8a66597_read(r8a66597, SYSCFG0); - if (i++ > 1000) { - printk(KERN_ERR "r8a66597: register access fail.\n"); - return -ENXIO; - } - } while ((tmp & SCKE) != SCKE); - r8a66597_write(r8a66597, 0x04, 0x02); -#else - do { - r8a66597_write(r8a66597, USBE, SYSCFG0); - tmp = r8a66597_read(r8a66597, SYSCFG0); - if (i++ > 1000) { - printk(KERN_ERR "r8a66597: register access fail.\n"); - return -ENXIO; - } - } while ((tmp & USBE) != USBE); - r8a66597_bclr(r8a66597, USBE, SYSCFG0); - r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL, - SYSCFG0); + do { + r8a66597_write(r8a66597, SCKE, SYSCFG0); + tmp = r8a66597_read(r8a66597, SYSCFG0); + if (i++ > 1000) { + printk(KERN_ERR "r8a66597: reg access fail.\n"); + return -ENXIO; + } + } while ((tmp & SCKE) != SCKE); + r8a66597_write(r8a66597, 0x04, 0x02); + } else { + do { + r8a66597_write(r8a66597, USBE, SYSCFG0); + tmp = r8a66597_read(r8a66597, SYSCFG0); + if (i++ > 1000) { + printk(KERN_ERR "r8a66597: reg access fail.\n"); + return -ENXIO; + } + } while ((tmp & USBE) != USBE); + r8a66597_bclr(r8a66597, USBE, SYSCFG0); + r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), + XTAL, SYSCFG0); - i = 0; - r8a66597_bset(r8a66597, XCKE, SYSCFG0); - do { - msleep(1); - tmp = r8a66597_read(r8a66597, SYSCFG0); - if (i++ > 500) { - printk(KERN_ERR "r8a66597: register access fail.\n"); - return -ENXIO; - } - } while ((tmp & SCKE) != SCKE); -#endif /* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */ + i = 0; + r8a66597_bset(r8a66597, XCKE, SYSCFG0); + do { + msleep(1); + tmp = r8a66597_read(r8a66597, SYSCFG0); + if (i++ > 500) { + printk(KERN_ERR "r8a66597: reg access fail.\n"); + return -ENXIO; + } + } while ((tmp & SCKE) != SCKE); + } return 0; } @@ -136,15 +136,16 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597) { r8a66597_bclr(r8a66597, SCKE, SYSCFG0); udelay(1); -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) -#if defined(CONFIG_HAVE_CLK) - clk_disable(r8a66597->clk); -#endif -#else - r8a66597_bclr(r8a66597, PLLC, SYSCFG0); - r8a66597_bclr(r8a66597, XCKE, SYSCFG0); - r8a66597_bclr(r8a66597, USBE, SYSCFG0); + + if (r8a66597->pdata->on_chip) { +#ifdef CONFIG_HAVE_CLK + clk_disable(r8a66597->clk); #endif + } else { + r8a66597_bclr(r8a66597, PLLC, SYSCFG0); + r8a66597_bclr(r8a66597, XCKE, SYSCFG0); + r8a66597_bclr(r8a66597, USBE, SYSCFG0); + } } static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port) @@ -205,7 +206,7 @@ static int enable_controller(struct r8a66597 *r8a66597) r8a66597_bset(r8a66597, SIGNE | SACKE, INTENB1); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + for (port = 0; port < r8a66597->max_root_hub; port++) r8a66597_enable_port(r8a66597, port); return 0; @@ -218,7 +219,7 @@ static void disable_controller(struct r8a66597 *r8a66597) r8a66597_write(r8a66597, 0, INTENB0); r8a66597_write(r8a66597, 0, INTSTS0); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + for (port = 0; port < r8a66597->max_root_hub; port++) r8a66597_disable_port(r8a66597, port); r8a66597_clock_disable(r8a66597); @@ -249,11 +250,12 @@ static int is_hub_limit(char *devpath) return ((strlen(devpath) >= 4) ? 1 : 0); } -static void get_port_number(char *devpath, u16 *root_port, u16 *hub_port) +static void get_port_number(struct r8a66597 *r8a66597, + char *devpath, u16 *root_port, u16 *hub_port) { if (root_port) { *root_port = (devpath[0] & 0x0F) - 1; - if (*root_port >= R8A66597_MAX_ROOT_HUB) + if (*root_port >= r8a66597->max_root_hub) printk(KERN_ERR "r8a66597: Illegal root port number.\n"); } if (hub_port) @@ -355,7 +357,8 @@ static int make_r8a66597_device(struct r8a66597 *r8a66597, INIT_LIST_HEAD(&dev->device_list); list_add_tail(&dev->device_list, &r8a66597->child_device); - get_port_number(urb->dev->devpath, &dev->root_port, &dev->hub_port); + get_port_number(r8a66597, urb->dev->devpath, + &dev->root_port, &dev->hub_port); if (!is_child_device(urb->dev->devpath)) r8a66597->root_hub[dev->root_port].dev = dev; @@ -420,7 +423,7 @@ static void free_usb_address(struct r8a66597 *r8a66597, list_del(&dev->device_list); kfree(dev); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + for (port = 0; port < r8a66597->max_root_hub; port++) { if (r8a66597->root_hub[port].dev == dev) { r8a66597->root_hub[port].dev = NULL; break; @@ -495,10 +498,20 @@ static void r8a66597_pipe_toggle(struct r8a66597 *r8a66597, r8a66597_bset(r8a66597, SQCLR, pipe->pipectr); } +static inline unsigned short mbw_value(struct r8a66597 *r8a66597) +{ + if (r8a66597->pdata->on_chip) + return MBW_32; + else + return MBW_16; +} + /* this function must be called with interrupt disabled */ static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum) { - r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL); + unsigned short mbw = mbw_value(r8a66597); + + r8a66597_mdfy(r8a66597, mbw | pipenum, mbw | CURPIPE, CFIFOSEL); r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum); } @@ -506,11 +519,13 @@ static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum) static inline void fifo_change_from_pipe(struct r8a66597 *r8a66597, struct r8a66597_pipe *pipe) { + unsigned short mbw = mbw_value(r8a66597); + cfifo_change(r8a66597, 0); - r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D0FIFOSEL); - r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D1FIFOSEL); + r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D0FIFOSEL); + r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D1FIFOSEL); - r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum, MBW | CURPIPE, + r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum, mbw | CURPIPE, pipe->fifosel); r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE, pipe->info.pipenum); } @@ -742,9 +757,13 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597, struct r8a66597_pipe *pipe, struct urb *urb) { -#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597) int i; struct r8a66597_pipe_info *info = &pipe->info; + unsigned short mbw = mbw_value(r8a66597); + + /* pipe dma is only for external controlles */ + if (r8a66597->pdata->on_chip) + return; if ((pipe->info.pipenum != 0) && (info->type != R8A66597_INT)) { for (i = 0; i < R8A66597_MAX_DMA_CHANNEL; i++) { @@ -763,8 +782,8 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597, set_pipe_reg_addr(pipe, i); cfifo_change(r8a66597, 0); - r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum, - MBW | CURPIPE, pipe->fifosel); + r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum, + mbw | CURPIPE, pipe->fifosel); r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE, pipe->info.pipenum); @@ -772,7 +791,6 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597, break; } } -#endif /* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */ } /* this function must be called with interrupt disabled */ @@ -1769,7 +1787,7 @@ static void r8a66597_timer(unsigned long _r8a66597) spin_lock_irqsave(&r8a66597->lock, flags); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + for (port = 0; port < r8a66597->max_root_hub; port++) r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); @@ -1807,7 +1825,7 @@ static void set_address_zero(struct r8a66597 *r8a66597, struct urb *urb) u16 root_port, hub_port; if (usb_address == 0) { - get_port_number(urb->dev->devpath, + get_port_number(r8a66597, urb->dev->devpath, &root_port, &hub_port); set_devadd_reg(r8a66597, 0, get_r8a66597_usb_speed(urb->dev->speed), @@ -2082,7 +2100,7 @@ static int r8a66597_hub_status_data(struct usb_hcd *hcd, char *buf) *buf = 0; /* initialize (no change) */ - for (i = 0; i < R8A66597_MAX_ROOT_HUB; i++) { + for (i = 0; i < r8a66597->max_root_hub; i++) { if (r8a66597->root_hub[i].port & 0xffff0000) *buf |= 1 << (i + 1); } @@ -2097,11 +2115,11 @@ static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597, { desc->bDescriptorType = 0x29; desc->bHubContrCurrent = 0; - desc->bNbrPorts = R8A66597_MAX_ROOT_HUB; + desc->bNbrPorts = r8a66597->max_root_hub; desc->bDescLength = 9; desc->bPwrOn2PwrGood = 0; desc->wHubCharacteristics = cpu_to_le16(0x0011); - desc->bitmap[0] = ((1 << R8A66597_MAX_ROOT_HUB) - 1) << 1; + desc->bitmap[0] = ((1 << r8a66597->max_root_hub) - 1) << 1; desc->bitmap[1] = ~0; } @@ -2129,7 +2147,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } break; case ClearPortFeature: - if (wIndex > R8A66597_MAX_ROOT_HUB) + if (wIndex > r8a66597->max_root_hub) goto error; if (wLength != 0) goto error; @@ -2162,12 +2180,12 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, *buf = 0x00; break; case GetPortStatus: - if (wIndex > R8A66597_MAX_ROOT_HUB) + if (wIndex > r8a66597->max_root_hub) goto error; *(__le32 *)buf = cpu_to_le32(rh->port); break; case SetPortFeature: - if (wIndex > R8A66597_MAX_ROOT_HUB) + if (wIndex > r8a66597->max_root_hub) goto error; if (wLength != 0) goto error; @@ -2216,7 +2234,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd) dbg("%s", __func__); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; unsigned long dvstctr_reg = get_dvstctr_reg(port); @@ -2247,7 +2265,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd) dbg("%s", __func__); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; unsigned long dvstctr_reg = get_dvstctr_reg(port); @@ -2305,16 +2323,16 @@ static struct hc_driver r8a66597_hc_driver = { }; #if defined(CONFIG_PM) -static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state) +static int r8a66597_suspend(struct device *dev) { - struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev); + struct r8a66597 *r8a66597 = dev_get_drvdata(dev); int port; dbg("%s", __func__); disable_controller(r8a66597); - for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; rh->port = 0x00000000; @@ -2323,9 +2341,9 @@ static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int r8a66597_resume(struct platform_device *pdev) +static int r8a66597_resume(struct device *dev) { - struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev); + struct r8a66597 *r8a66597 = dev_get_drvdata(dev); struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597); dbg("%s", __func__); @@ -2335,9 +2353,17 @@ static int r8a66597_resume(struct platform_device *pdev) return 0; } + +static struct dev_pm_ops r8a66597_dev_pm_ops = { + .suspend = r8a66597_suspend, + .resume = r8a66597_resume, + .poweroff = r8a66597_suspend, + .restore = r8a66597_resume, +}; + +#define R8A66597_DEV_PM_OPS (&r8a66597_dev_pm_ops) #else /* if defined(CONFIG_PM) */ -#define r8a66597_suspend NULL -#define r8a66597_resume NULL +#define R8A66597_DEV_PM_OPS NULL #endif static int __init_or_module r8a66597_remove(struct platform_device *pdev) @@ -2348,8 +2374,9 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev) del_timer_sync(&r8a66597->rh_timer); usb_remove_hcd(hcd); iounmap((void *)r8a66597->reg); -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) - clk_put(r8a66597->clk); +#ifdef CONFIG_HAVE_CLK + if (r8a66597->pdata->on_chip) + clk_put(r8a66597->clk); #endif usb_put_hcd(hcd); return 0; @@ -2357,7 +2384,7 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev) static int __devinit r8a66597_probe(struct platform_device *pdev) { -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK char clk_name[8]; #endif struct resource *res = NULL, *ires; @@ -2419,15 +2446,20 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) r8a66597->pdata = pdev->dev.platform_data; r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW; -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) - snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id); - r8a66597->clk = clk_get(&pdev->dev, clk_name); - if (IS_ERR(r8a66597->clk)) { - dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); - ret = PTR_ERR(r8a66597->clk); - goto clean_up2; - } + if (r8a66597->pdata->on_chip) { +#ifdef CONFIG_HAVE_CLK + snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id); + r8a66597->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(r8a66597->clk)) { + dev_err(&pdev->dev, "cannot get clock \"%s\"\n", + clk_name); + ret = PTR_ERR(r8a66597->clk); + goto clean_up2; + } #endif + r8a66597->max_root_hub = 1; + } else + r8a66597->max_root_hub = 2; spin_lock_init(&r8a66597->lock); init_timer(&r8a66597->rh_timer); @@ -2457,8 +2489,9 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) return 0; clean_up3: -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) - clk_put(r8a66597->clk); +#ifdef CONFIG_HAVE_CLK + if (r8a66597->pdata->on_chip) + clk_put(r8a66597->clk); clean_up2: #endif usb_put_hcd(hcd); @@ -2473,11 +2506,10 @@ clean_up: static struct platform_driver r8a66597_driver = { .probe = r8a66597_probe, .remove = r8a66597_remove, - .suspend = r8a66597_suspend, - .resume = r8a66597_resume, .driver = { .name = (char *) hcd_name, .owner = THIS_MODULE, + .pm = R8A66597_DEV_PM_OPS, }, }; diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h index d72680b433f..228e3fb2385 100644 --- a/drivers/usb/host/r8a66597.h +++ b/drivers/usb/host/r8a66597.h @@ -26,390 +26,16 @@ #ifndef __R8A66597_H__ #define __R8A66597_H__ -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK #include <linux/clk.h> #endif #include <linux/usb/r8a66597.h> -#define SYSCFG0 0x00 -#define SYSCFG1 0x02 -#define SYSSTS0 0x04 -#define SYSSTS1 0x06 -#define DVSTCTR0 0x08 -#define DVSTCTR1 0x0A -#define TESTMODE 0x0C -#define PINCFG 0x0E -#define DMA0CFG 0x10 -#define DMA1CFG 0x12 -#define CFIFO 0x14 -#define D0FIFO 0x18 -#define D1FIFO 0x1C -#define CFIFOSEL 0x20 -#define CFIFOCTR 0x22 -#define CFIFOSIE 0x24 -#define D0FIFOSEL 0x28 -#define D0FIFOCTR 0x2A -#define D1FIFOSEL 0x2C -#define D1FIFOCTR 0x2E -#define INTENB0 0x30 -#define INTENB1 0x32 -#define INTENB2 0x34 -#define BRDYENB 0x36 -#define NRDYENB 0x38 -#define BEMPENB 0x3A -#define SOFCFG 0x3C -#define INTSTS0 0x40 -#define INTSTS1 0x42 -#define INTSTS2 0x44 -#define BRDYSTS 0x46 -#define NRDYSTS 0x48 -#define BEMPSTS 0x4A -#define FRMNUM 0x4C -#define UFRMNUM 0x4E -#define USBADDR 0x50 -#define USBREQ 0x54 -#define USBVAL 0x56 -#define USBINDX 0x58 -#define USBLENG 0x5A -#define DCPCFG 0x5C -#define DCPMAXP 0x5E -#define DCPCTR 0x60 -#define PIPESEL 0x64 -#define PIPECFG 0x68 -#define PIPEBUF 0x6A -#define PIPEMAXP 0x6C -#define PIPEPERI 0x6E -#define PIPE1CTR 0x70 -#define PIPE2CTR 0x72 -#define PIPE3CTR 0x74 -#define PIPE4CTR 0x76 -#define PIPE5CTR 0x78 -#define PIPE6CTR 0x7A -#define PIPE7CTR 0x7C -#define PIPE8CTR 0x7E -#define PIPE9CTR 0x80 -#define PIPE1TRE 0x90 -#define PIPE1TRN 0x92 -#define PIPE2TRE 0x94 -#define PIPE2TRN 0x96 -#define PIPE3TRE 0x98 -#define PIPE3TRN 0x9A -#define PIPE4TRE 0x9C -#define PIPE4TRN 0x9E -#define PIPE5TRE 0xA0 -#define PIPE5TRN 0xA2 -#define DEVADD0 0xD0 -#define DEVADD1 0xD2 -#define DEVADD2 0xD4 -#define DEVADD3 0xD6 -#define DEVADD4 0xD8 -#define DEVADD5 0xDA -#define DEVADD6 0xDC -#define DEVADD7 0xDE -#define DEVADD8 0xE0 -#define DEVADD9 0xE2 -#define DEVADDA 0xE4 - -/* System Configuration Control Register */ -#define XTAL 0xC000 /* b15-14: Crystal selection */ -#define XTAL48 0x8000 /* 48MHz */ -#define XTAL24 0x4000 /* 24MHz */ -#define XTAL12 0x0000 /* 12MHz */ -#define XCKE 0x2000 /* b13: External clock enable */ -#define PLLC 0x0800 /* b11: PLL control */ -#define SCKE 0x0400 /* b10: USB clock enable */ -#define PCSDIS 0x0200 /* b9: not CS wakeup */ -#define LPSME 0x0100 /* b8: Low power sleep mode */ -#define HSE 0x0080 /* b7: Hi-speed enable */ -#define DCFM 0x0040 /* b6: Controller function select */ -#define DRPD 0x0020 /* b5: D+/- pull down control */ -#define DPRPU 0x0010 /* b4: D+ pull up control */ -#define USBE 0x0001 /* b0: USB module operation enable */ - -/* System Configuration Status Register */ -#define OVCBIT 0x8000 /* b15-14: Over-current bit */ -#define OVCMON 0xC000 /* b15-14: Over-current monitor */ -#define SOFEA 0x0020 /* b5: SOF monitor */ -#define IDMON 0x0004 /* b3: ID-pin monitor */ -#define LNST 0x0003 /* b1-0: D+, D- line status */ -#define SE1 0x0003 /* SE1 */ -#define FS_KSTS 0x0002 /* Full-Speed K State */ -#define FS_JSTS 0x0001 /* Full-Speed J State */ -#define LS_JSTS 0x0002 /* Low-Speed J State */ -#define LS_KSTS 0x0001 /* Low-Speed K State */ -#define SE0 0x0000 /* SE0 */ - -/* Device State Control Register */ -#define EXTLP0 0x0400 /* b10: External port */ -#define VBOUT 0x0200 /* b9: VBUS output */ -#define WKUP 0x0100 /* b8: Remote wakeup */ -#define RWUPE 0x0080 /* b7: Remote wakeup sense */ -#define USBRST 0x0040 /* b6: USB reset enable */ -#define RESUME 0x0020 /* b5: Resume enable */ -#define UACT 0x0010 /* b4: USB bus enable */ -#define RHST 0x0007 /* b1-0: Reset handshake status */ -#define HSPROC 0x0004 /* HS handshake is processing */ -#define HSMODE 0x0003 /* Hi-Speed mode */ -#define FSMODE 0x0002 /* Full-Speed mode */ -#define LSMODE 0x0001 /* Low-Speed mode */ -#define UNDECID 0x0000 /* Undecided */ - -/* Test Mode Register */ -#define UTST 0x000F /* b3-0: Test select */ -#define H_TST_PACKET 0x000C /* HOST TEST Packet */ -#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */ -#define H_TST_K 0x000A /* HOST TEST K */ -#define H_TST_J 0x0009 /* HOST TEST J */ -#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */ -#define P_TST_PACKET 0x0004 /* PERI TEST Packet */ -#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */ -#define P_TST_K 0x0002 /* PERI TEST K */ -#define P_TST_J 0x0001 /* PERI TEST J */ -#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */ - -/* Data Pin Configuration Register */ -#define LDRV 0x8000 /* b15: Drive Current Adjust */ -#define VIF1 0x0000 /* VIF = 1.8V */ -#define VIF3 0x8000 /* VIF = 3.3V */ -#define INTA 0x0001 /* b1: USB INT-pin active */ - -/* DMAx Pin Configuration Register */ -#define DREQA 0x4000 /* b14: Dreq active select */ -#define BURST 0x2000 /* b13: Burst mode */ -#define DACKA 0x0400 /* b10: Dack active select */ -#define DFORM 0x0380 /* b9-7: DMA mode select */ -#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */ -#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */ -#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */ -#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */ -#define DENDA 0x0040 /* b6: Dend active select */ -#define PKTM 0x0020 /* b5: Packet mode */ -#define DENDE 0x0010 /* b4: Dend enable */ -#define OBUS 0x0004 /* b2: OUTbus mode */ - -/* CFIFO/DxFIFO Port Select Register */ -#define RCNT 0x8000 /* b15: Read count mode */ -#define REW 0x4000 /* b14: Buffer rewind */ -#define DCLRM 0x2000 /* b13: DMA buffer clear mode */ -#define DREQE 0x1000 /* b12: DREQ output enable */ -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) -#define MBW 0x0800 -#else -#define MBW 0x0400 /* b10: Maximum bit width for FIFO access */ -#endif -#define MBW_8 0x0000 /* 8bit */ -#define MBW_16 0x0400 /* 16bit */ -#define BIGEND 0x0100 /* b8: Big endian mode */ -#define BYTE_LITTLE 0x0000 /* little dendian */ -#define BYTE_BIG 0x0100 /* big endifan */ -#define ISEL 0x0020 /* b5: DCP FIFO port direction select */ -#define CURPIPE 0x000F /* b2-0: PIPE select */ - -/* CFIFO/DxFIFO Port Control Register */ -#define BVAL 0x8000 /* b15: Buffer valid flag */ -#define BCLR 0x4000 /* b14: Buffer clear */ -#define FRDY 0x2000 /* b13: FIFO ready */ -#define DTLN 0x0FFF /* b11-0: FIFO received data length */ - -/* Interrupt Enable Register 0 */ -#define VBSE 0x8000 /* b15: VBUS interrupt */ -#define RSME 0x4000 /* b14: Resume interrupt */ -#define SOFE 0x2000 /* b13: Frame update interrupt */ -#define DVSE 0x1000 /* b12: Device state transition interrupt */ -#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */ -#define BEMPE 0x0400 /* b10: Buffer empty interrupt */ -#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */ -#define BRDYE 0x0100 /* b8: Buffer ready interrupt */ - -/* Interrupt Enable Register 1 */ -#define OVRCRE 0x8000 /* b15: Over-current interrupt */ -#define BCHGE 0x4000 /* b14: USB us chenge interrupt */ -#define DTCHE 0x1000 /* b12: Detach sense interrupt */ -#define ATTCHE 0x0800 /* b11: Attach sense interrupt */ -#define EOFERRE 0x0040 /* b6: EOF error interrupt */ -#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */ -#define SACKE 0x0010 /* b4: SETUP ACK interrupt */ - -/* BRDY Interrupt Enable/Status Register */ -#define BRDY9 0x0200 /* b9: PIPE9 */ -#define BRDY8 0x0100 /* b8: PIPE8 */ -#define BRDY7 0x0080 /* b7: PIPE7 */ -#define BRDY6 0x0040 /* b6: PIPE6 */ -#define BRDY5 0x0020 /* b5: PIPE5 */ -#define BRDY4 0x0010 /* b4: PIPE4 */ -#define BRDY3 0x0008 /* b3: PIPE3 */ -#define BRDY2 0x0004 /* b2: PIPE2 */ -#define BRDY1 0x0002 /* b1: PIPE1 */ -#define BRDY0 0x0001 /* b1: PIPE0 */ - -/* NRDY Interrupt Enable/Status Register */ -#define NRDY9 0x0200 /* b9: PIPE9 */ -#define NRDY8 0x0100 /* b8: PIPE8 */ -#define NRDY7 0x0080 /* b7: PIPE7 */ -#define NRDY6 0x0040 /* b6: PIPE6 */ -#define NRDY5 0x0020 /* b5: PIPE5 */ -#define NRDY4 0x0010 /* b4: PIPE4 */ -#define NRDY3 0x0008 /* b3: PIPE3 */ -#define NRDY2 0x0004 /* b2: PIPE2 */ -#define NRDY1 0x0002 /* b1: PIPE1 */ -#define NRDY0 0x0001 /* b1: PIPE0 */ - -/* BEMP Interrupt Enable/Status Register */ -#define BEMP9 0x0200 /* b9: PIPE9 */ -#define BEMP8 0x0100 /* b8: PIPE8 */ -#define BEMP7 0x0080 /* b7: PIPE7 */ -#define BEMP6 0x0040 /* b6: PIPE6 */ -#define BEMP5 0x0020 /* b5: PIPE5 */ -#define BEMP4 0x0010 /* b4: PIPE4 */ -#define BEMP3 0x0008 /* b3: PIPE3 */ -#define BEMP2 0x0004 /* b2: PIPE2 */ -#define BEMP1 0x0002 /* b1: PIPE1 */ -#define BEMP0 0x0001 /* b0: PIPE0 */ - -/* SOF Pin Configuration Register */ -#define TRNENSEL 0x0100 /* b8: Select transaction enable period */ -#define BRDYM 0x0040 /* b6: BRDY clear timing */ -#define INTL 0x0020 /* b5: Interrupt sense select */ -#define EDGESTS 0x0010 /* b4: */ -#define SOFMODE 0x000C /* b3-2: SOF pin select */ -#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */ -#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */ -#define SOF_DISABLE 0x0000 /* SOF OUT Disable */ - -/* Interrupt Status Register 0 */ -#define VBINT 0x8000 /* b15: VBUS interrupt */ -#define RESM 0x4000 /* b14: Resume interrupt */ -#define SOFR 0x2000 /* b13: SOF frame update interrupt */ -#define DVST 0x1000 /* b12: Device state transition interrupt */ -#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */ -#define BEMP 0x0400 /* b10: Buffer empty interrupt */ -#define NRDY 0x0200 /* b9: Buffer not ready interrupt */ -#define BRDY 0x0100 /* b8: Buffer ready interrupt */ -#define VBSTS 0x0080 /* b7: VBUS input port */ -#define DVSQ 0x0070 /* b6-4: Device state */ -#define DS_SPD_CNFG 0x0070 /* Suspend Configured */ -#define DS_SPD_ADDR 0x0060 /* Suspend Address */ -#define DS_SPD_DFLT 0x0050 /* Suspend Default */ -#define DS_SPD_POWR 0x0040 /* Suspend Powered */ -#define DS_SUSP 0x0040 /* Suspend */ -#define DS_CNFG 0x0030 /* Configured */ -#define DS_ADDS 0x0020 /* Address */ -#define DS_DFLT 0x0010 /* Default */ -#define DS_POWR 0x0000 /* Powered */ -#define DVSQS 0x0030 /* b5-4: Device state */ -#define VALID 0x0008 /* b3: Setup packet detected flag */ -#define CTSQ 0x0007 /* b2-0: Control transfer stage */ -#define CS_SQER 0x0006 /* Sequence error */ -#define CS_WRND 0x0005 /* Control write nodata status stage */ -#define CS_WRSS 0x0004 /* Control write status stage */ -#define CS_WRDS 0x0003 /* Control write data stage */ -#define CS_RDSS 0x0002 /* Control read status stage */ -#define CS_RDDS 0x0001 /* Control read data stage */ -#define CS_IDST 0x0000 /* Idle or setup stage */ - -/* Interrupt Status Register 1 */ -#define OVRCR 0x8000 /* b15: Over-current interrupt */ -#define BCHG 0x4000 /* b14: USB bus chenge interrupt */ -#define DTCH 0x1000 /* b12: Detach sense interrupt */ -#define ATTCH 0x0800 /* b11: Attach sense interrupt */ -#define EOFERR 0x0040 /* b6: EOF-error interrupt */ -#define SIGN 0x0020 /* b5: Setup ignore interrupt */ -#define SACK 0x0010 /* b4: Setup acknowledge interrupt */ - -/* Frame Number Register */ -#define OVRN 0x8000 /* b15: Overrun error */ -#define CRCE 0x4000 /* b14: Received data error */ -#define FRNM 0x07FF /* b10-0: Frame number */ - -/* Micro Frame Number Register */ -#define UFRNM 0x0007 /* b2-0: Micro frame number */ - -/* Default Control Pipe Maxpacket Size Register */ -/* Pipe Maxpacket Size Register */ -#define DEVSEL 0xF000 /* b15-14: Device address select */ -#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */ - -/* Default Control Pipe Control Register */ -#define BSTS 0x8000 /* b15: Buffer status */ -#define SUREQ 0x4000 /* b14: Send USB request */ -#define CSCLR 0x2000 /* b13: complete-split status clear */ -#define CSSTS 0x1000 /* b12: complete-split status */ -#define SUREQCLR 0x0800 /* b11: stop setup request */ -#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ -#define SQSET 0x0080 /* b7: Sequence toggle bit set */ -#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ -#define PBUSY 0x0020 /* b5: pipe busy */ -#define PINGE 0x0010 /* b4: ping enable */ -#define CCPL 0x0004 /* b2: Enable control transfer complete */ -#define PID 0x0003 /* b1-0: Response PID */ -#define PID_STALL11 0x0003 /* STALL */ -#define PID_STALL 0x0002 /* STALL */ -#define PID_BUF 0x0001 /* BUF */ -#define PID_NAK 0x0000 /* NAK */ - -/* Pipe Window Select Register */ -#define PIPENM 0x0007 /* b2-0: Pipe select */ - -/* Pipe Configuration Register */ -#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */ -#define R8A66597_ISO 0xC000 /* Isochronous */ -#define R8A66597_INT 0x8000 /* Interrupt */ -#define R8A66597_BULK 0x4000 /* Bulk */ -#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */ -#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */ -#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */ -#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */ -#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */ -#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */ - -/* Pipe Buffer Configuration Register */ -#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */ -#define BUFNMB 0x007F /* b6-0: Pipe buffer number */ -#define PIPE0BUF 256 -#define PIPExBUF 64 - -/* Pipe Maxpacket Size Register */ -#define MXPS 0x07FF /* b10-0: Maxpacket size */ - -/* Pipe Cycle Configuration Register */ -#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */ -#define IITV 0x0007 /* b2-0: Isochronous interval */ - -/* Pipex Control Register */ -#define BSTS 0x8000 /* b15: Buffer status */ -#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */ -#define CSCLR 0x2000 /* b13: complete-split status clear */ -#define CSSTS 0x1000 /* b12: complete-split status */ -#define ATREPM 0x0400 /* b10: Auto repeat mode */ -#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */ -#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ -#define SQSET 0x0080 /* b7: Sequence toggle bit set */ -#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ -#define PBUSY 0x0020 /* b5: pipe busy */ -#define PID 0x0003 /* b1-0: Response PID */ - -/* PIPExTRE */ -#define TRENB 0x0200 /* b9: Transaction counter enable */ -#define TRCLR 0x0100 /* b8: Transaction counter clear */ - -/* PIPExTRN */ -#define TRNCNT 0xFFFF /* b15-0: Transaction counter */ - -/* DEVADDx */ -#define UPPHUB 0x7800 -#define HUBPORT 0x0700 -#define USBSPD 0x00C0 -#define RTPORT 0x0001 - #define R8A66597_MAX_NUM_PIPE 10 #define R8A66597_BUF_BSIZE 8 #define R8A66597_MAX_DEVICE 10 -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) -#define R8A66597_MAX_ROOT_HUB 1 -#else #define R8A66597_MAX_ROOT_HUB 2 -#endif #define R8A66597_MAX_SAMPLING 5 #define R8A66597_RH_POLL_TIME 10 #define R8A66597_MAX_DMA_CHANNEL 2 @@ -487,7 +113,7 @@ struct r8a66597_root_hub { struct r8a66597 { spinlock_t lock; unsigned long reg; -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) +#ifdef CONFIG_HAVE_CLK struct clk *clk; #endif struct r8a66597_platdata *pdata; @@ -504,6 +130,7 @@ struct r8a66597 { unsigned short interval_map; unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE]; unsigned char dma_map; + unsigned int max_root_hub; struct list_head child_device; unsigned long child_connect_map[4]; @@ -550,21 +177,22 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597, unsigned long offset, u16 *buf, int len) { -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) unsigned long fifoaddr = r8a66597->reg + offset; unsigned long count; - count = len / 4; - insl(fifoaddr, buf, count); + if (r8a66597->pdata->on_chip) { + count = len / 4; + insl(fifoaddr, buf, count); - if (len & 0x00000003) { - unsigned long tmp = inl(fifoaddr); - memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03); + if (len & 0x00000003) { + unsigned long tmp = inl(fifoaddr); + memcpy((unsigned char *)buf + count * 4, &tmp, + len & 0x03); + } + } else { + len = (len + 1) / 2; + insw(fifoaddr, buf, len); } -#else - len = (len + 1) / 2; - insw(r8a66597->reg + offset, buf, len); -#endif } static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val, @@ -578,33 +206,33 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, int len) { unsigned long fifoaddr = r8a66597->reg + offset; -#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) unsigned long count; unsigned char *pb; int i; - count = len / 4; - outsl(fifoaddr, buf, count); + if (r8a66597->pdata->on_chip) { + count = len / 4; + outsl(fifoaddr, buf, count); + + if (len & 0x00000003) { + pb = (unsigned char *)buf + count * 4; + for (i = 0; i < (len & 0x00000003); i++) { + if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND) + outb(pb[i], fifoaddr + i); + else + outb(pb[i], fifoaddr + 3 - i); + } + } + } else { + int odd = len & 0x0001; - if (len & 0x00000003) { - pb = (unsigned char *)buf + count * 4; - for (i = 0; i < (len & 0x00000003); i++) { - if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND) - outb(pb[i], fifoaddr + i); - else - outb(pb[i], fifoaddr + 3 - i); + len = len / 2; + outsw(fifoaddr, buf, len); + if (unlikely(odd)) { + buf = &buf[len]; + outb((unsigned char)*buf, fifoaddr); } } -#else - int odd = len & 0x0001; - - len = len / 2; - outsw(fifoaddr, buf, len); - if (unlikely(odd)) { - buf = &buf[len]; - outb((unsigned char)*buf, fifoaddr); - } -#endif } static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, |