diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/storage/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/usb/storage/Makefile | 3 | ||||
| -rw-r--r-- | drivers/usb/storage/cypress_atacb.c | 88 | ||||
| -rw-r--r-- | drivers/usb/storage/unusual_cypress.h (renamed from drivers/usb/storage/cypress_atacb.h) | 27 | ||||
| -rw-r--r-- | drivers/usb/storage/unusual_devs.h | 16 | ||||
| -rw-r--r-- | drivers/usb/storage/usb.c | 11 | ||||
| -rw-r--r-- | drivers/usb/storage/usual-tables.c | 1 |
7 files changed, 111 insertions, 39 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index e6cc245257f..2c73fa97d94 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -146,7 +146,7 @@ config USB_STORAGE_KARMA operation. config USB_STORAGE_CYPRESS_ATACB - bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" + tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE ---help--- Say Y here if you want to use SAT (ata pass through) on devices based @@ -156,6 +156,8 @@ config USB_STORAGE_CYPRESS_ATACB If you say no here your device will still work with the standard usb mass storage class. + If this driver is compiled as a module, it will be named ums-cypress. + config USB_LIBUSUAL bool "The shared table of common (or usual) storage devices" depends on USB diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 5fb7847e41a..0650f022e56 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -17,7 +17,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o -usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y) @@ -28,10 +27,12 @@ else obj-$(CONFIG_USB) += libusual.o usual-tables.o endif +obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o +ums-cypress-objs := cypress_atacb.o ums-isd200-objs := isd200.o ums-sddr09-objs := sddr09.o ums-sddr55-objs := sddr55.o diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 9466a99baab..19306f7b1da 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -19,6 +19,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/module.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_eh.h> @@ -29,6 +30,46 @@ #include "scsiglue.h" #include "debug.h" + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id cypress_usb_ids[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, cypress_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev cypress_unusual_dev_list[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + /* * ATACB is a protocol used on cypress usb<->ata bridge to * send raw ATA command over mass storage @@ -36,7 +77,7 @@ * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf * datasheet from cypress.com. */ -void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) +static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) { unsigned char save_cmnd[MAX_COMMAND_SIZE]; @@ -197,3 +238,48 @@ end: if (srb->cmnd[0] == ATA_12) srb->cmd_len = 12; } + + +static int cypress_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - cypress_usb_ids) + cypress_unusual_dev_list); + if (result) + return result; + + us->protocol_name = "Transparent SCSI with Cypress ATACB"; + us->proto_handler = cypress_atacb_passthrough; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver cypress_driver = { + .name = "ums-cypress", + .probe = cypress_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = cypress_usb_ids, + .soft_unbind = 1, +}; + +static int __init cypress_init(void) +{ + return usb_register(&cypress_driver); +} + +static void __exit cypress_exit(void) +{ + usb_deregister(&cypress_driver); +} + +module_init(cypress_init); +module_exit(cypress_exit); diff --git a/drivers/usb/storage/cypress_atacb.h b/drivers/usb/storage/unusual_cypress.h index fbada898d56..44be6d75dab 100644 --- a/drivers/usb/storage/cypress_atacb.h +++ b/drivers/usb/storage/unusual_cypress.h @@ -1,8 +1,5 @@ -/* - * Support for emulating SAT (ata pass through) on devices based - * on the Cypress USB/ATA bridge supporting ATACB. - * - * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr) +/* Unusual Devices File for devices based on the Cypress USB/ATA bridge + * with support for ATACB * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -19,7 +16,19 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef _CYPRESS_ATACB_H_ -#define _CYPRESS_ATACB_H_ -extern void cypress_atacb_passthrough(struct scsi_cmnd*, struct us_data*); -#endif +#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \ + defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE) + +/* CY7C68300 : support atacb */ +UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, + "Cypress", + "Cypress AT2LP", + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0), + +/* CY7C68310 : support atacb and atacb2 */ +UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, + "Cypress", + "Cypress ISD-300LP", + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 50034e141f9..eff97aed7bf 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -375,22 +375,6 @@ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, US_SC_DEVICE, US_PR_CB, NULL, US_FL_MAX_SECTORS_MIN), -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB -/* CY7C68300 : support atacb */ -UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, - "Cypress", - "Cypress AT2LP", - US_SC_CYP_ATACB, US_PR_DEVICE, NULL, - 0), - -/* CY7C68310 : support atacb and atacb2 */ -UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, - "Cypress", - "Cypress ISD-300LP", - US_SC_CYP_ATACB, US_PR_DEVICE, NULL, - 0), -#endif - /* Reported by Simon Levitt <simon@whattf.com> * This entry needs Sub and Proto fields */ UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 238f271d817..241e1944cf1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -87,9 +87,6 @@ #ifdef CONFIG_USB_STORAGE_KARMA #include "karma.h" #endif -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB -#include "cypress_atacb.h" -#endif #include "sierra_ms.h" #include "option_ms.h" @@ -705,14 +702,6 @@ static void get_protocol(struct us_data *us) us->protocol_name = "Uniform Floppy Interface (UFI)"; us->proto_handler = usb_stor_ufi_command; break; - -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB - case US_SC_CYP_ATACB: - us->protocol_name = "Transparent SCSI with Cypress ATACB"; - us->proto_handler = cypress_atacb_passthrough; - break; -#endif - } } diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index 5f2703fa48e..be461ee9f00 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -77,6 +77,7 @@ struct ignore_entry { } static struct ignore_entry ignore_ids[] = { +# include "unusual_cypress.h" # include "unusual_isd200.h" # include "unusual_sddr09.h" # include "unusual_sddr55.h" |