diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/chipidea/udc.c | 4 | ||||
-rw-r--r-- | drivers/usb/core/config.c | 4 | ||||
-rw-r--r-- | drivers/usb/core/quirks.c | 4 | ||||
-rw-r--r-- | drivers/usb/gadget/bcm63xx_udc.c | 58 | ||||
-rw-r--r-- | drivers/usb/gadget/f_fs.c | 7 | ||||
-rw-r--r-- | drivers/usb/gadget/printer.c | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/s3c2410_udc.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/ehci-hcd.c | 13 | ||||
-rw-r--r-- | drivers/usb/host/ehci-hub.c | 26 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 14 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.c | 15 | ||||
-rw-r--r-- | drivers/usb/musb/musb_host.c | 3 | ||||
-rw-r--r-- | drivers/usb/musb/musb_virthub.c | 26 | ||||
-rw-r--r-- | drivers/usb/musb/omap2430.c | 2 | ||||
-rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 57 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 2 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio_ids.h | 6 | ||||
-rw-r--r-- | drivers/usb/serial/option.c | 3 |
18 files changed, 156 insertions, 92 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 80de2f88ed2..4ab2cb62dfc 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -105,7 +105,7 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir) do { /* flush any pending transfer */ - hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n)); + hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n)); while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) cpu_relax(); } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); @@ -205,7 +205,7 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl) if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; - hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n)); + hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n)); while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) cpu_relax(); diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 8d72f0c6593..062967c90b2 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -717,6 +717,10 @@ int usb_get_configuration(struct usb_device *dev) result = -ENOMEM; goto err; } + + if (dev->quirks & USB_QUIRK_DELAY_INIT) + msleep(100); + result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, bigbuffer, length); if (result < 0) { diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 8f37063c0a4..739ee8e8bdf 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -47,6 +47,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech HD Pro Webcams C920 and C930e */ + { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Logitech Quickcam Fusion */ { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 888fbb43b33..e969eb809a8 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -360,24 +360,30 @@ static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off) bcm_writel(val, udc->iudma_regs + off); } -static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off) +static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan) { - return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off); + return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } -static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off, + int chan) { - bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off); + bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } -static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off) +static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan) { - return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off); + return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } -static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off, + int chan) { - bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off); + bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) @@ -638,7 +644,7 @@ static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma, } while (!last_bd); usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, - ENETDMAC_CHANCFG_REG(iudma->ch_idx)); + ENETDMAC_CHANCFG_REG, iudma->ch_idx); } /** @@ -694,9 +700,9 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); /* stop DMA, then wait for the hardware to wrap up */ - usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx)); + usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx); - while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) & + while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) & ENETDMAC_CHANCFG_EN_MASK) { udelay(1); @@ -713,10 +719,10 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", ch_idx); usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, - ENETDMAC_CHANCFG_REG(ch_idx)); + ENETDMAC_CHANCFG_REG, ch_idx); } } - usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx)); + usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx); /* don't leave "live" HW-owned entries for the next guy to step on */ for (d = iudma->bd_ring; d <= iudma->end_bd; d++) @@ -728,11 +734,11 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) /* set up IRQs, UBUS burst size, and BD base for this channel */ usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, - ENETDMAC_IRMASK_REG(ch_idx)); - usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx)); + ENETDMAC_IRMASK_REG, ch_idx); + usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx); - usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx)); - usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx)); + usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx); + usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx); } /** @@ -2035,7 +2041,7 @@ static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id) spin_lock(&udc->lock); usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, - ENETDMAC_IR_REG(iudma->ch_idx)); + ENETDMAC_IR_REG, iudma->ch_idx); bep = iudma->bep; rc = iudma_read(udc, iudma); @@ -2175,18 +2181,18 @@ static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p) seq_printf(s, " [ep%d]:\n", max_t(int, iudma_defaults[ch_idx].ep_num, 0)); seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", - usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)), - usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)), - usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)), - usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx))); + usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx)); - sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx)); - sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx)); + sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx); + sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx); seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", - usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)), + usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx), sram2 >> 16, sram2 & 0xffff, sram3 >> 16, sram3 & 0xffff, - usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx))); + usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx)); seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, iudma->n_bds); diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 306a2b52125..2b433439407 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -585,7 +585,6 @@ static ssize_t ffs_epfile_io(struct file *file, char __user *buf, size_t len, int read) { struct ffs_epfile *epfile = file->private_data; - struct usb_gadget *gadget = epfile->ffs->gadget; struct ffs_ep *ep; char *data = NULL; ssize_t ret, data_len; @@ -622,6 +621,12 @@ static ssize_t ffs_epfile_io(struct file *file, /* Allocate & copy */ if (!halt) { /* + * if we _do_ wait above, the epfile->ffs->gadget might be NULL + * before the waiting completes, so do not assign to 'gadget' earlier + */ + struct usb_gadget *gadget = epfile->ffs->gadget; + + /* * Controller may require buffer size to be aligned to * maxpacketsize of an out endpoint. */ diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index bf7a56b6d48..69b76efd11e 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -1157,7 +1157,7 @@ static int __init printer_bind_config(struct usb_configuration *c) usb_gadget_set_selfpowered(gadget); - if (gadget->is_otg) { + if (gadget_is_otg(gadget)) { otg_descriptor.bmAttributes |= USB_OTG_HNP; printer_cfg_driver.descriptors = otg_desc; printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index f04b2c3154d..dd9678f85c5 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1629,7 +1629,7 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev) ep->ep.desc = NULL; ep->halted = 0; INIT_LIST_HEAD(&ep->queue); - usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket); + usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket); } } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 471142725ff..81cda09b47e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -685,8 +685,15 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 status, masked_status, pcd_status = 0, cmd; int bh; + unsigned long flags; - spin_lock (&ehci->lock); + /* + * For threadirqs option we use spin_lock_irqsave() variant to prevent + * deadlock with ehci hrtimer callback, because hrtimer callbacks run + * in interrupt context even when threadirqs is specified. We can go + * back to spin_lock() variant when hrtimer callbacks become threaded. + */ + spin_lock_irqsave(&ehci->lock, flags); status = ehci_readl(ehci, &ehci->regs->status); @@ -704,7 +711,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { - spin_unlock(&ehci->lock); + spin_unlock_irqrestore(&ehci->lock, flags); return IRQ_NONE; } @@ -815,7 +822,7 @@ dead: if (bh) ehci_work (ehci); - spin_unlock (&ehci->lock); + spin_unlock_irqrestore(&ehci->lock, flags); if (pcd_status) usb_hcd_poll_rh_status(hcd); return IRQ_HANDLED; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 47b858fc50b..7ae0c4d5174 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -238,6 +238,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) int port; int mask; int changed; + bool fs_idle_delay; ehci_dbg(ehci, "suspend root hub\n"); @@ -272,6 +273,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) ehci->bus_suspended = 0; ehci->owned_ports = 0; changed = 0; + fs_idle_delay = false; port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; @@ -300,16 +302,32 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) } if (t1 != t2) { + /* + * On some controllers, Wake-On-Disconnect will + * generate false wakeup signals until the bus + * switches over to full-speed idle. For their + * sake, add a delay if we need one. + */ + if ((t2 & PORT_WKDISC_E) && + ehci_port_speed(ehci, t2) == + USB_PORT_STAT_HIGH_SPEED) + fs_idle_delay = true; ehci_writel(ehci, t2, reg); changed = 1; } } + spin_unlock_irq(&ehci->lock); + + if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) { + /* + * Wait for HCD to enter low-power mode or for the bus + * to switch to full-speed idle. + */ + usleep_range(5000, 5500); + } if (changed && ehci->has_tdi_phy_lpm) { - spin_unlock_irq(&ehci->lock); - msleep(5); /* 5 ms for HCD to enter low-power mode */ spin_lock_irq(&ehci->lock); - port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port]; @@ -322,8 +340,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) port, (t3 & HOSTPC_PHCD) ? "succeeded" : "failed"); } + spin_unlock_irq(&ehci->lock); } - spin_unlock_irq(&ehci->lock); /* Apparently some devices need a >= 1-uframe delay here */ if (ehci->bus_suspended) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6fe577d46fa..924a6ccdb62 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4733,6 +4733,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) /* Accept arbitrarily long scatter-gather lists */ hcd->self.sg_tablesize = ~0; + /* support to build packet from discontinuous buffers */ + hcd->self.no_sg_constraint = 1; + /* XHCI controllers don't stop the ep queue on short packets :| */ hcd->self.no_stop_on_short = 1; @@ -4757,14 +4760,6 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) /* xHCI private pointer was set in xhci_pci_probe for the second * registered roothub. */ - xhci = hcd_to_xhci(hcd); - /* - * Support arbitrarily aligned sg-list entries on hosts without - * TD fragment rules (which are currently unsupported). - */ - if (xhci->hci_version < 0x100) - hcd->self.no_sg_constraint = 1; - return 0; } @@ -4793,9 +4788,6 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) if (xhci->hci_version > 0x96) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; - if (xhci->hci_version < 0x100) - hcd->self.no_sg_constraint = 1; - /* Make sure the HC is halted. */ retval = xhci_halt(xhci); if (retval) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fc192ad9cc6..239ad0b1ceb 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -477,8 +477,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, musb->port1_status |= (USB_PORT_STAT_C_SUSPEND << 16) | MUSB_PORT_STAT_RESUME; + musb->rh_timer = jiffies + + msecs_to_jiffies(20); schedule_delayed_work( - &musb->finish_resume_work, 20); + &musb->finish_resume_work, + msecs_to_jiffies(20)); musb->xceiv->state = OTG_STATE_A_HOST; musb->is_active = 1; @@ -2157,11 +2160,19 @@ static void musb_restore_context(struct musb *musb) void __iomem *musb_base = musb->mregs; void __iomem *ep_target_regs; void __iomem *epio; + u8 power; musb_writew(musb_base, MUSB_FRAME, musb->context.frame); musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); - musb_writeb(musb_base, MUSB_POWER, musb->context.power); + + /* Don't affect SUSPENDM/RESUME bits in POWER reg */ + power = musb_readb(musb_base, MUSB_POWER); + power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME; + musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME); + power |= musb->context.power; + musb_writeb(musb_base, MUSB_POWER, power); + musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index ed455724017..abb38c3833e 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1183,6 +1183,9 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) csr = MUSB_CSR0_H_STATUSPKT | MUSB_CSR0_TXPKTRDY; + /* disable ping token in status phase */ + csr |= MUSB_CSR0_H_DIS_PING; + /* flag status stage */ musb->ep0_stage = MUSB_EP0_STATUS; diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index eb634433ef0..e2d2d8c9891 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -135,7 +135,8 @@ void musb_port_suspend(struct musb *musb, bool do_suspend) /* later, GetPortStatus will stop RESUME signaling */ musb->port1_status |= MUSB_PORT_STAT_RESUME; - schedule_delayed_work(&musb->finish_resume_work, 20); + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(20)); } } @@ -158,7 +159,6 @@ void musb_port_reset(struct musb *musb, bool do_reset) */ power = musb_readb(mbase, MUSB_POWER); if (do_reset) { - /* * If RESUME is set, we must make sure it stays minimum 20 ms. * Then we must clear RESUME and wait a bit to let musb start @@ -167,11 +167,22 @@ void musb_port_reset(struct musb *musb, bool do_reset) * detected". */ if (power & MUSB_POWER_RESUME) { - while (time_before(jiffies, musb->rh_timer)) - msleep(1); + long remain = (unsigned long) musb->rh_timer - jiffies; + + if (musb->rh_timer > 0 && remain > 0) { + /* take into account the minimum delay after resume */ + schedule_delayed_work( + &musb->deassert_reset_work, remain); + return; + } + musb_writeb(mbase, MUSB_POWER, - power & ~MUSB_POWER_RESUME); - msleep(1); + power & ~MUSB_POWER_RESUME); + + /* Give the core 1 ms to clear MUSB_POWER_RESUME */ + schedule_delayed_work(&musb->deassert_reset_work, + msecs_to_jiffies(1)); + return; } power &= 0xf0; @@ -180,7 +191,8 @@ void musb_port_reset(struct musb *musb, bool do_reset) musb->port1_status |= USB_PORT_STAT_RESET; musb->port1_status &= ~USB_PORT_STAT_ENABLE; - schedule_delayed_work(&musb->deassert_reset_work, 50); + schedule_delayed_work(&musb->deassert_reset_work, + msecs_to_jiffies(50)); } else { dev_dbg(musb->controller, "root port reset stopped\n"); musb_writeb(mbase, MUSB_POWER, diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 2a408cdaf7b..8aa59a2c5eb 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -659,7 +659,6 @@ static int omap2430_runtime_suspend(struct device *dev) OTG_INTERFSEL); omap2430_low_level_exit(musb); - phy_power_off(musb->phy); } return 0; @@ -674,7 +673,6 @@ static int omap2430_runtime_resume(struct device *dev) omap2430_low_level_init(musb); musb_writel(musb->mregs, OTG_INTERFSEL, musb->context.otg_interfsel); - phy_power_on(musb->phy); } return 0; diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8546c8dccd5..d204f745ed0 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -159,32 +159,6 @@ put_3p3: return rc; } -#ifdef CONFIG_PM_SLEEP -#define USB_PHY_SUSP_DIG_VOL 500000 -static int msm_hsusb_config_vddcx(int high) -{ - int max_vol = USB_PHY_VDD_DIG_VOL_MAX; - int min_vol; - int ret; - - if (high) - min_vol = USB_PHY_VDD_DIG_VOL_MIN; - else - min_vol = USB_PHY_SUSP_DIG_VOL; - - ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); - if (ret) { - pr_err("%s: unable to set the voltage for regulator " - "HSUSB_VDDCX\n", __func__); - return ret; - } - - pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); - - return ret; -} -#endif - static int msm_hsusb_ldo_set_mode(int on) { int ret = 0; @@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy) #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) #define PHY_RESUME_TIMEOUT_USEC (100 * 1000) -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM + +#define USB_PHY_SUSP_DIG_VOL 500000 +static int msm_hsusb_config_vddcx(int high) +{ + int max_vol = USB_PHY_VDD_DIG_VOL_MAX; + int min_vol; + int ret; + + if (high) + min_vol = USB_PHY_VDD_DIG_VOL_MIN; + else + min_vol = USB_PHY_SUSP_DIG_VOL; + + ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); + if (ret) { + pr_err("%s: unable to set the voltage for regulator " + "HSUSB_VDDCX\n", __func__); + return ret; + } + + pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); + + return ret; +} + static int msm_otg_suspend(struct msm_otg *motg) { struct usb_phy *phy = &motg->phy; @@ -1733,22 +1732,18 @@ static int msm_otg_pm_resume(struct device *dev) } #endif -#ifdef CONFIG_PM static const struct dev_pm_ops msm_otg_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, msm_otg_runtime_idle) }; -#endif static struct platform_driver msm_otg_driver = { .remove = msm_otg_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &msm_otg_dev_pm_ops, -#endif }, }; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ee1f00f03c4..44ab1298680 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -907,6 +907,8 @@ static const struct usb_device_id id_table_combined[] = { /* Crucible Devices */ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) }, + /* Cressi Devices */ + { USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1e2d369df86..e599fbfcde5 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1320,3 +1320,9 @@ * Manufacturer: Smart GSM Team */ #define FTDI_Z3X_PID 0x0011 + +/* + * Product: Cressi PC Interface + * Manufacturer: Cressi + */ +#define FTDI_CRESSI_PID 0x87d0 diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 216d20affba..68fc9fe6593 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1526,7 +1526,8 @@ static const struct usb_device_id option_ids[] = { /* Cinterion */ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, |