summaryrefslogtreecommitdiffstats
path: root/drivers/uwb/i1480/i1480u-wlp/lc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/uwb/i1480/i1480u-wlp/lc.c')
-rw-r--r--drivers/uwb/i1480/i1480u-wlp/lc.c421
1 files changed, 421 insertions, 0 deletions
diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c
new file mode 100644
index 00000000000..737d60cd5b7
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/lc.c
@@ -0,0 +1,421 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Driver for the Linux Network stack.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * This implements a very simple network driver for the WLP USB
+ * device that is associated to a UWB (Ultra Wide Band) host.
+ *
+ * This is seen as an interface of a composite device. Once the UWB
+ * host has an association to another WLP capable device, the
+ * networking interface (aka WLP) can start to send packets back and
+ * forth.
+ *
+ * Limitations:
+ *
+ * - Hand cranked; can't ifup the interface until there is an association
+ *
+ * - BW allocation very simplistic [see i1480u_mas_set() and callees].
+ *
+ *
+ * ROADMAP:
+ *
+ * ENTRY POINTS (driver model):
+ *
+ * i1480u_driver_{exit,init}(): initialization of the driver.
+ *
+ * i1480u_probe(): called by the driver code when a device
+ * matching 'i1480u_id_table' is connected.
+ *
+ * This allocs a netdev instance, inits with
+ * i1480u_add(), then registers_netdev().
+ * i1480u_init()
+ * i1480u_add()
+ *
+ * i1480u_disconnect(): device has been disconnected/module
+ * is being removed.
+ * i1480u_rm()
+ */
+#include <linux/version.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include "i1480u-wlp.h"
+
+
+
+static inline
+void i1480u_init(struct i1480u *i1480u)
+{
+ /* nothing so far... doesn't it suck? */
+ spin_lock_init(&i1480u->lock);
+ INIT_LIST_HEAD(&i1480u->tx_list);
+ spin_lock_init(&i1480u->tx_list_lock);
+ wlp_options_init(&i1480u->options);
+ edc_init(&i1480u->tx_errors);
+ edc_init(&i1480u->rx_errors);
+#ifdef i1480u_FLOW_CONTROL
+ edc_init(&i1480u->notif_edc);
+#endif
+ stats_init(&i1480u->lqe_stats);
+ stats_init(&i1480u->rssi_stats);
+ wlp_init(&i1480u->wlp);
+}
+
+/**
+ * Fill WLP device information structure
+ *
+ * The structure will contain a few character arrays, each ending with a
+ * null terminated string. Each string has to fit (excluding terminating
+ * character) into a specified range obtained from the WLP substack.
+ *
+ * It is still not clear exactly how this device information should be
+ * obtained. Until we find out we use the USB device descriptor as backup, some
+ * information elements have intuitive mappings, other not.
+ */
+static
+void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info)
+{
+ struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+ struct usb_device *usb_dev = i1480u->usb_dev;
+ /* Treat device name and model name the same */
+ if (usb_dev->descriptor.iProduct) {
+ usb_string(usb_dev, usb_dev->descriptor.iProduct,
+ dev_info->name, sizeof(dev_info->name));
+ usb_string(usb_dev, usb_dev->descriptor.iProduct,
+ dev_info->model_name, sizeof(dev_info->model_name));
+ }
+ if (usb_dev->descriptor.iManufacturer)
+ usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
+ dev_info->manufacturer,
+ sizeof(dev_info->manufacturer));
+ scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x",
+ __le16_to_cpu(usb_dev->descriptor.bcdDevice));
+ if (usb_dev->descriptor.iSerialNumber)
+ usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
+ dev_info->serial, sizeof(dev_info->serial));
+ /* FIXME: where should we obtain category? */
+ dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER);
+ /* FIXME: Complete OUI and OUIsubdiv attributes */
+}
+
+#ifdef i1480u_FLOW_CONTROL
+/**
+ * Callback for the notification endpoint
+ *
+ * This mostly controls the xon/xoff protocol. In case of hard error,
+ * we stop the queue. If not, we always retry.
+ */
+static
+void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs)
+{
+ struct i1480u *i1480u = urb->context;
+ struct usb_interface *usb_iface = i1480u->usb_iface;
+ struct device *dev = &usb_iface->dev;
+ int result;
+
+ switch (urb->status) {
+ case 0: /* Got valid data, do xon/xoff */
+ switch (i1480u->notif_buffer[0]) {
+ case 'N':
+ dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies);
+ netif_stop_queue(i1480u->net_dev);
+ break;
+ case 'A':
+ dev_err(dev, "XON STARTING queue at %lu\n", jiffies);
+ netif_start_queue(i1480u->net_dev);
+ break;
+ default:
+ dev_err(dev, "NEP: unknown data 0x%02hhx\n",
+ i1480u->notif_buffer[0]);
+ }
+ break;
+ case -ECONNRESET: /* Controlled situation ... */
+ case -ENOENT: /* we killed the URB... */
+ dev_err(dev, "NEP: URB reset/noent %d\n", urb->status);
+ goto error;
+ case -ESHUTDOWN: /* going away! */
+ dev_err(dev, "NEP: URB down %d\n", urb->status);
+ goto error;
+ default: /* Retry unless it gets ugly */
+ if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS,
+ EDC_ERROR_TIMEFRAME)) {
+ dev_err(dev, "NEP: URB max acceptable errors "
+ "exceeded; resetting device\n");
+ goto error_reset;
+ }
+ dev_err(dev, "NEP: URB error %d\n", urb->status);
+ break;
+ }
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result < 0) {
+ dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n",
+ result);
+ goto error_reset;
+ }
+ return;
+
+error_reset:
+ wlp_reset_all(&i1480-wlp);
+error:
+ netif_stop_queue(i1480u->net_dev);
+ return;
+}
+#endif
+
+static
+int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface)
+{
+ int result = -ENODEV;
+ struct wlp *wlp = &i1480u->wlp;
+ struct usb_device *usb_dev = interface_to_usbdev(iface);
+ struct net_device *net_dev = i1480u->net_dev;
+ struct uwb_rc *rc;
+ struct uwb_dev *uwb_dev;
+#ifdef i1480u_FLOW_CONTROL
+ struct usb_endpoint_descriptor *epd;
+#endif
+
+ i1480u->usb_dev = usb_get_dev(usb_dev);
+ i1480u->usb_iface = iface;
+ rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev);
+ if (rc == NULL) {
+ dev_err(&iface->dev, "Cannot get associated UWB Radio "
+ "Controller\n");
+ goto out;
+ }
+ wlp->xmit_frame = i1480u_xmit_frame;
+ wlp->fill_device_info = i1480u_fill_device_info;
+ wlp->stop_queue = i1480u_stop_queue;
+ wlp->start_queue = i1480u_start_queue;
+ result = wlp_setup(wlp, rc);
+ if (result < 0) {
+ dev_err(&iface->dev, "Cannot setup WLP\n");
+ goto error_wlp_setup;
+ }
+ result = 0;
+ ether_setup(net_dev); /* make it an etherdevice */
+ uwb_dev = &rc->uwb_dev;
+ /* FIXME: hookup address change notifications? */
+
+ memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data,
+ sizeof(net_dev->dev_addr));
+
+ net_dev->hard_header_len = sizeof(struct untd_hdr_cmp)
+ + sizeof(struct wlp_tx_hdr)
+ + WLP_DATA_HLEN
+ + ETH_HLEN;
+ net_dev->mtu = 3500;
+ net_dev->tx_queue_len = 20; /* FIXME: maybe use 1000? */
+
+/* net_dev->flags &= ~IFF_BROADCAST; FIXME: BUG in firmware */
+ /* FIXME: multicast disabled */
+ net_dev->flags &= ~IFF_MULTICAST;
+ net_dev->features &= ~NETIF_F_SG;
+ net_dev->features &= ~NETIF_F_FRAGLIST;
+ /* All NETIF_F_*_CSUM disabled */
+ net_dev->features |= NETIF_F_HIGHDMA;
+ net_dev->watchdog_timeo = 5*HZ; /* FIXME: a better default? */
+
+ net_dev->open = i1480u_open;
+ net_dev->stop = i1480u_stop;
+ net_dev->hard_start_xmit = i1480u_hard_start_xmit;
+ net_dev->tx_timeout = i1480u_tx_timeout;
+ net_dev->get_stats = i1480u_get_stats;
+ net_dev->set_config = i1480u_set_config;
+ net_dev->change_mtu = i1480u_change_mtu;
+
+#ifdef i1480u_FLOW_CONTROL
+ /* Notification endpoint setup (submitted when we open the device) */
+ i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (i1480u->notif_urb == NULL) {
+ dev_err(&iface->dev, "Unable to allocate notification URB\n");
+ result = -ENOMEM;
+ goto error_urb_alloc;
+ }
+ epd = &iface->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(i1480u->notif_urb, usb_dev,
+ usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+ i1480u->notif_buffer, sizeof(i1480u->notif_buffer),
+ i1480u_notif_cb, i1480u, epd->bInterval);
+
+#endif
+
+ i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX;
+ i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD;
+ i1480u->tx_inflight.restart_ts = jiffies;
+ usb_set_intfdata(iface, i1480u);
+ return result;
+
+#ifdef i1480u_FLOW_CONTROL
+error_urb_alloc:
+#endif
+ wlp_remove(wlp);
+error_wlp_setup:
+ uwb_rc_put(rc);
+out:
+ usb_put_dev(i1480u->usb_dev);
+ return result;
+}
+
+static void i1480u_rm(struct i1480u *i1480u)
+{
+ struct uwb_rc *rc = i1480u->wlp.rc;
+ usb_set_intfdata(i1480u->usb_iface, NULL);
+#ifdef i1480u_FLOW_CONTROL
+ usb_kill_urb(i1480u->notif_urb);
+ usb_free_urb(i1480u->notif_urb);
+#endif
+ wlp_remove(&i1480u->wlp);
+ uwb_rc_put(rc);
+ usb_put_dev(i1480u->usb_dev);
+}
+
+/** Just setup @net_dev's i1480u private data */
+static void i1480u_netdev_setup(struct net_device *net_dev)
+{
+ struct i1480u *i1480u = netdev_priv(net_dev);
+ /* Initialize @i1480u */
+ memset(i1480u, 0, sizeof(*i1480u));
+ i1480u_init(i1480u);
+}
+
+/**
+ * Probe a i1480u interface and register it
+ *
+ * @iface: USB interface to link to
+ * @id: USB class/subclass/protocol id
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Does basic housekeeping stuff and then allocs a netdev with space
+ * for the i1480u data. Initializes, registers in i1480u, registers in
+ * netdev, ready to go.
+ */
+static int i1480u_probe(struct usb_interface *iface,
+ const struct usb_device_id *id)
+{
+ int result;
+ struct net_device *net_dev;
+ struct device *dev = &iface->dev;
+ struct i1480u *i1480u;
+
+ /* Allocate instance [calls i1480u_netdev_setup() on it] */
+ result = -ENOMEM;
+ net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup);
+ if (net_dev == NULL) {
+ dev_err(dev, "no memory for network device instance\n");
+ goto error_alloc_netdev;
+ }
+ SET_NETDEV_DEV(net_dev, dev);
+ i1480u = netdev_priv(net_dev);
+ i1480u->net_dev = net_dev;
+ result = i1480u_add(i1480u, iface); /* Now setup all the wlp stuff */
+ if (result < 0) {
+ dev_err(dev, "cannot add i1480u device: %d\n", result);
+ goto error_i1480u_add;
+ }
+ result = register_netdev(net_dev); /* Okey dokey, bring it up */
+ if (result < 0) {
+ dev_err(dev, "cannot register network device: %d\n", result);
+ goto error_register_netdev;
+ }
+ i1480u_sysfs_setup(i1480u);
+ if (result < 0)
+ goto error_sysfs_init;
+ return 0;
+
+error_sysfs_init:
+ unregister_netdev(net_dev);
+error_register_netdev:
+ i1480u_rm(i1480u);
+error_i1480u_add:
+ free_netdev(net_dev);
+error_alloc_netdev:
+ return result;
+}
+
+
+/**
+ * Disconect a i1480u from the system.
+ *
+ * i1480u_stop() has been called before, so al the rx and tx contexts
+ * have been taken down already. Make sure the queue is stopped,
+ * unregister netdev and i1480u, free and kill.
+ */
+static void i1480u_disconnect(struct usb_interface *iface)
+{
+ struct i1480u *i1480u;
+ struct net_device *net_dev;
+
+ i1480u = usb_get_intfdata(iface);
+ net_dev = i1480u->net_dev;
+ netif_stop_queue(net_dev);
+#ifdef i1480u_FLOW_CONTROL
+ usb_kill_urb(i1480u->notif_urb);
+#endif
+ i1480u_sysfs_release(i1480u);
+ unregister_netdev(net_dev);
+ i1480u_rm(i1480u);
+ free_netdev(net_dev);
+}
+
+static struct usb_device_id i1480u_id_table[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE \
+ | USB_DEVICE_ID_MATCH_DEV_INFO \
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x8086,
+ .idProduct = 0x0c3b,
+ .bDeviceClass = 0xef,
+ .bDeviceSubClass = 0x02,
+ .bDeviceProtocol = 0x02,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0xff,
+ .bInterfaceProtocol = 0xff,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(usb, i1480u_id_table);
+
+static struct usb_driver i1480u_driver = {
+ .name = KBUILD_MODNAME,
+ .probe = i1480u_probe,
+ .disconnect = i1480u_disconnect,
+ .id_table = i1480u_id_table,
+};
+
+static int __init i1480u_driver_init(void)
+{
+ return usb_register(&i1480u_driver);
+}
+module_init(i1480u_driver_init);
+
+
+static void __exit i1480u_driver_exit(void)
+{
+ usb_deregister(&i1480u_driver);
+}
+module_exit(i1480u_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB");
+MODULE_LICENSE("GPL");