diff options
Diffstat (limited to 'drivers/uwb/wlp')
| -rw-r--r-- | drivers/uwb/wlp/Makefile | 10 | ||||
| -rw-r--r-- | drivers/uwb/wlp/driver.c | 43 | ||||
| -rw-r--r-- | drivers/uwb/wlp/eda.c | 449 | ||||
| -rw-r--r-- | drivers/uwb/wlp/messages.c | 1946 | ||||
| -rw-r--r-- | drivers/uwb/wlp/sysfs.c | 709 | ||||
| -rw-r--r-- | drivers/uwb/wlp/txrx.c | 374 | ||||
| -rw-r--r-- | drivers/uwb/wlp/wlp-internal.h | 228 | ||||
| -rw-r--r-- | drivers/uwb/wlp/wlp-lc.c | 585 | ||||
| -rw-r--r-- | drivers/uwb/wlp/wss-lc.c | 1055 |
9 files changed, 5399 insertions, 0 deletions
diff --git a/drivers/uwb/wlp/Makefile b/drivers/uwb/wlp/Makefile new file mode 100644 index 00000000000..c72c11db5b1 --- /dev/null +++ b/drivers/uwb/wlp/Makefile @@ -0,0 +1,10 @@ +obj-$(CONFIG_UWB_WLP) := wlp.o + +wlp-objs := \ + driver.o \ + eda.o \ + messages.o \ + sysfs.o \ + txrx.o \ + wlp-lc.o \ + wss-lc.o diff --git a/drivers/uwb/wlp/driver.c b/drivers/uwb/wlp/driver.c new file mode 100644 index 00000000000..cb8d699b6a6 --- /dev/null +++ b/drivers/uwb/wlp/driver.c @@ -0,0 +1,43 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Life cycle of WLP substack + * + * FIXME: Docs + */ + +#include <linux/module.h> + +static int __init wlp_subsys_init(void) +{ + return 0; +} +module_init(wlp_subsys_init); + +static void __exit wlp_subsys_exit(void) +{ + return; +} +module_exit(wlp_subsys_exit); + +MODULE_AUTHOR("Reinette Chatre <reinette.chatre@intel.com>"); +MODULE_DESCRIPTION("WiMedia Logical Link Control Protocol (WLP)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/wlp/eda.c b/drivers/uwb/wlp/eda.c new file mode 100644 index 00000000000..cdfe8dfc434 --- /dev/null +++ b/drivers/uwb/wlp/eda.c @@ -0,0 +1,449 @@ +/* + * WUSB Wire Adapter: WLP interface + * Ethernet to device address cache + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We need to be able to map ethernet addresses to device addresses + * and back because there is not explicit relationship between the eth + * addresses used in the ETH frames and the device addresses (no, it + * would not have been simpler to force as ETH address the MBOA MAC + * address...no, not at all :). + * + * A device has one MBOA MAC address and one device address. It is possible + * for a device to have more than one virtual MAC address (although a + * virtual address can be the same as the MBOA MAC address). The device + * address is guaranteed to be unique among the devices in the extended + * beacon group (see ECMA 17.1.1). We thus use the device address as index + * to this cache. We do allow searching based on virtual address as this + * is how Ethernet frames will be addressed. + * + * We need to support virtual EUI-48. Although, right now the virtual + * EUI-48 will always be the same as the MAC SAP address. The EDA cache + * entry thus contains a MAC SAP address as well as the virtual address + * (used to map the network stack address to a neighbor). When we move + * to support more than one virtual MAC on a host then this organization + * will have to change. Perhaps a neighbor has a list of WSSs, each with a + * tag and virtual EUI-48. + * + * On data transmission + * it is used to determine if the neighbor is connected and what WSS it + * belongs to. With this we know what tag to add to the WLP frame. Storing + * the WSS in the EDA cache may be overkill because we only support one + * WSS. Hopefully we will support more than one WSS at some point. + * On data reception it is used to determine the WSS based on + * the tag and address of the transmitting neighbor. + */ + +#define D_LOCAL 5 +#include <linux/netdevice.h> +#include <linux/uwb/debug.h> +#include <linux/etherdevice.h> +#include <linux/wlp.h> +#include "wlp-internal.h" + + +/* FIXME: cache is not purged, only on device close */ + +/* FIXME: does not scale, change to dynamic array */ + +/* + * Initialize the EDA cache + * + * @returns 0 if ok, < 0 errno code on error + * + * Call when the interface is being brought up + * + * NOTE: Keep it as a separate function as the implementation will + * change and be more complex. + */ +void wlp_eda_init(struct wlp_eda *eda) +{ + INIT_LIST_HEAD(&eda->cache); + spin_lock_init(&eda->lock); +} + +/* + * Release the EDA cache + * + * @returns 0 if ok, < 0 errno code on error + * + * Called when the interface is brought down + */ +void wlp_eda_release(struct wlp_eda *eda) +{ + unsigned long flags; + struct wlp_eda_node *itr, *next; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry_safe(itr, next, &eda->cache, list_node) { + list_del(&itr->list_node); + kfree(itr); + } + spin_unlock_irqrestore(&eda->lock, flags); +} + +/* + * Add an address mapping + * + * @returns 0 if ok, < 0 errno code on error + * + * An address mapping is initially created when the neighbor device is seen + * for the first time (it is "onair"). At this time the neighbor is not + * connected or associated with a WSS so we only populate the Ethernet and + * Device address fields. + * + */ +int wlp_eda_create_node(struct wlp_eda *eda, + const unsigned char eth_addr[ETH_ALEN], + const struct uwb_dev_addr *dev_addr) +{ + int result = 0; + struct wlp_eda_node *itr; + unsigned long flags; + + BUG_ON(dev_addr == NULL || eth_addr == NULL); + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + printk(KERN_ERR "EDA cache already contains entry " + "for neighbor %02x:%02x\n", + dev_addr->data[1], dev_addr->data[0]); + result = -EEXIST; + goto out_unlock; + } + } + itr = kzalloc(sizeof(*itr), GFP_ATOMIC); + if (itr != NULL) { + memcpy(itr->eth_addr, eth_addr, sizeof(itr->eth_addr)); + itr->dev_addr = *dev_addr; + list_add(&itr->list_node, &eda->cache); + } else + result = -ENOMEM; +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Remove entry from EDA cache + * + * This is done when the device goes off air. + */ +void wlp_eda_rm_node(struct wlp_eda *eda, const struct uwb_dev_addr *dev_addr) +{ + struct wlp_eda_node *itr, *next; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry_safe(itr, next, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + list_del(&itr->list_node); + kfree(itr); + break; + } + } + spin_unlock_irqrestore(&eda->lock, flags); +} + +/* + * Update an address mapping + * + * @returns 0 if ok, < 0 errno code on error + */ +int wlp_eda_update_node(struct wlp_eda *eda, + const struct uwb_dev_addr *dev_addr, + struct wlp_wss *wss, + const unsigned char virt_addr[ETH_ALEN], + const u8 tag, const enum wlp_wss_connect state) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + /* Found it, update it */ + itr->wss = wss; + memcpy(itr->virt_addr, virt_addr, + sizeof(itr->virt_addr)); + itr->tag = tag; + itr->state = state; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Update only state field of an address mapping + * + * @returns 0 if ok, < 0 errno code on error + */ +int wlp_eda_update_node_state(struct wlp_eda *eda, + const struct uwb_dev_addr *dev_addr, + const enum wlp_wss_connect state) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + /* Found it, update it */ + itr->state = state; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Return contents of EDA cache entry + * + * @dev_addr: index to EDA cache + * @eda_entry: pointer to where contents of EDA cache will be copied + */ +int wlp_copy_eda_node(struct wlp_eda *eda, struct uwb_dev_addr *dev_addr, + struct wlp_eda_node *eda_entry) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + *eda_entry = *itr; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Execute function for every element in the cache + * + * @function: function to execute on element of cache (must be atomic) + * @priv: private data of function + * @returns: result of first function that failed, or last function + * executed if no function failed. + * + * Stop executing when function returns error for any element in cache. + * + * IMPORTANT: We are using a spinlock here: the function executed on each + * element has to be atomic. + */ +int wlp_eda_for_each(struct wlp_eda *eda, wlp_eda_for_each_f function, + void *priv) +{ + int result = 0; + struct wlp *wlp = container_of(eda, struct wlp, eda); + struct wlp_eda_node *entry; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(entry, &eda->cache, list_node) { + result = (*function)(wlp, entry, priv); + if (result < 0) + break; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Execute function for single element in the cache (return dev addr) + * + * @virt_addr: index into EDA cache used to determine which element to + * execute the function on + * @dev_addr: device address of element in cache will be returned using + * @dev_addr + * @function: function to execute on element of cache (must be atomic) + * @priv: private data of function + * @returns: result of function + * + * IMPORTANT: We are using a spinlock here: the function executed on the + * element has to be atomic. + */ +int wlp_eda_for_virtual(struct wlp_eda *eda, + const unsigned char virt_addr[ETH_ALEN], + struct uwb_dev_addr *dev_addr, + wlp_eda_for_each_f function, + void *priv) +{ + int result = 0; + struct wlp *wlp = container_of(eda, struct wlp, eda); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_eda_node *itr; + unsigned long flags; + int found = 0; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(itr->virt_addr, virt_addr, + sizeof(itr->virt_addr))) { + d_printf(6, dev, "EDA: looking for " + "%02x:%02x:%02x:%02x:%02x:%02x hit %02x:%02x " + "wss %p tag 0x%02x state %u\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5], + itr->dev_addr.data[1], + itr->dev_addr.data[0], itr->wss, + itr->tag, itr->state); + result = (*function)(wlp, itr, priv); + *dev_addr = itr->dev_addr; + found = 1; + break; + } else + d_printf(6, dev, "EDA: looking for " + "%02x:%02x:%02x:%02x:%02x:%02x " + "against " + "%02x:%02x:%02x:%02x:%02x:%02x miss\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5], + itr->virt_addr[0], itr->virt_addr[1], + itr->virt_addr[2], itr->virt_addr[3], + itr->virt_addr[4], itr->virt_addr[5]); + } + if (!found) { + if (printk_ratelimit()) + dev_err(dev, "EDA: Eth addr %02x:%02x:%02x" + ":%02x:%02x:%02x not found.\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5]); + result = -ENODEV; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +static const char *__wlp_wss_connect_state[] = { "WLP_WSS_UNCONNECTED", + "WLP_WSS_CONNECTED", + "WLP_WSS_CONNECT_FAILED", +}; + +static const char *wlp_wss_connect_state_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_wss_connect_state)) + return "unknown WSS connection state"; + return __wlp_wss_connect_state[id]; +} + +/* + * View EDA cache from user space + * + * A debugging feature to give user visibility into the EDA cache. Also + * used to display members of WSS to user (called from wlp_wss_members_show()) + */ +ssize_t wlp_eda_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + struct wlp_eda_node *entry; + unsigned long flags; + struct wlp_eda *eda = &wlp->eda; + spin_lock_irqsave(&eda->lock, flags); + result = scnprintf(buf, PAGE_SIZE, "#eth_addr dev_addr wss_ptr " + "tag state virt_addr\n"); + list_for_each_entry(entry, &eda->cache, list_node) { + result += scnprintf(buf + result, PAGE_SIZE - result, + "%02x:%02x:%02x:%02x:%02x:%02x %02x:%02x " + "%p 0x%02x %s " + "%02x:%02x:%02x:%02x:%02x:%02x\n", + entry->eth_addr[0], entry->eth_addr[1], + entry->eth_addr[2], entry->eth_addr[3], + entry->eth_addr[4], entry->eth_addr[5], + entry->dev_addr.data[1], + entry->dev_addr.data[0], entry->wss, + entry->tag, + wlp_wss_connect_state_str(entry->state), + entry->virt_addr[0], entry->virt_addr[1], + entry->virt_addr[2], entry->virt_addr[3], + entry->virt_addr[4], entry->virt_addr[5]); + if (result >= PAGE_SIZE) + break; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} +EXPORT_SYMBOL_GPL(wlp_eda_show); + +/* + * Add new EDA cache entry based on user input in sysfs + * + * Should only be used for debugging. + * + * The WSS is assumed to be the only WSS supported. This needs to be + * redesigned when we support more than one WSS. + */ +ssize_t wlp_eda_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + struct wlp_eda *eda = &wlp->eda; + u8 eth_addr[6]; + struct uwb_dev_addr dev_addr; + u8 tag; + unsigned state; + + result = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx " + "%02hhx:%02hhx %02hhx %u\n", + ð_addr[0], ð_addr[1], + ð_addr[2], ð_addr[3], + ð_addr[4], ð_addr[5], + &dev_addr.data[1], &dev_addr.data[0], &tag, &state); + switch (result) { + case 6: /* no dev addr specified -- remove entry NOT IMPLEMENTED */ + /*result = wlp_eda_rm(eda, eth_addr, &dev_addr);*/ + result = -ENOSYS; + break; + case 10: + state = state >= 1 ? 1 : 0; + result = wlp_eda_create_node(eda, eth_addr, &dev_addr); + if (result < 0 && result != -EEXIST) + goto error; + /* Set virtual addr to be same as MAC */ + result = wlp_eda_update_node(eda, &dev_addr, &wlp->wss, + eth_addr, tag, state); + if (result < 0) + goto error; + break; + default: /* bad format */ + result = -EINVAL; + } +error: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_eda_store); diff --git a/drivers/uwb/wlp/messages.c b/drivers/uwb/wlp/messages.c new file mode 100644 index 00000000000..a64cb824171 --- /dev/null +++ b/drivers/uwb/wlp/messages.c @@ -0,0 +1,1946 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Message construction and parsing + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/wlp.h> +#define D_LOCAL 6 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + +static +const char *__wlp_assoc_frame[] = { + [WLP_ASSOC_D1] = "WLP_ASSOC_D1", + [WLP_ASSOC_D2] = "WLP_ASSOC_D2", + [WLP_ASSOC_M1] = "WLP_ASSOC_M1", + [WLP_ASSOC_M2] = "WLP_ASSOC_M2", + [WLP_ASSOC_M3] = "WLP_ASSOC_M3", + [WLP_ASSOC_M4] = "WLP_ASSOC_M4", + [WLP_ASSOC_M5] = "WLP_ASSOC_M5", + [WLP_ASSOC_M6] = "WLP_ASSOC_M6", + [WLP_ASSOC_M7] = "WLP_ASSOC_M7", + [WLP_ASSOC_M8] = "WLP_ASSOC_M8", + [WLP_ASSOC_F0] = "WLP_ASSOC_F0", + [WLP_ASSOC_E1] = "WLP_ASSOC_E1", + [WLP_ASSOC_E2] = "WLP_ASSOC_E2", + [WLP_ASSOC_C1] = "WLP_ASSOC_C1", + [WLP_ASSOC_C2] = "WLP_ASSOC_C2", + [WLP_ASSOC_C3] = "WLP_ASSOC_C3", + [WLP_ASSOC_C4] = "WLP_ASSOC_C4", +}; + +static const char *wlp_assoc_frame_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_assoc_frame)) + return "unknown association frame"; + return __wlp_assoc_frame[id]; +} + +static const char *__wlp_assc_error[] = { + "none", + "Authenticator Failure", + "Rogue activity suspected", + "Device busy", + "Setup Locked", + "Registrar not ready", + "Invalid WSS selection", + "Message timeout", + "Enrollment session timeout", + "Device password invalid", + "Unsupported version", + "Internal error", + "Undefined error", + "Numeric comparison failure", + "Waiting for user input", +}; + +static const char *wlp_assc_error_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_assc_error)) + return "unknown WLP association error"; + return __wlp_assc_error[id]; +} + +static inline void wlp_set_attr_hdr(struct wlp_attr_hdr *hdr, unsigned type, + size_t len) +{ + hdr->type = cpu_to_le16(type); + hdr->length = cpu_to_le16(len); +} + +/* + * Populate fields of a constant sized attribute + * + * @returns: total size of attribute including size of new value + * + * We have two instances of this function (wlp_pset and wlp_set): one takes + * the value as a parameter, the other takes a pointer to the value as + * parameter. They thus only differ in how the value is assigned to the + * attribute. + * + * We use sizeof(*attr) - sizeof(struct wlp_attr_hdr) instead of + * sizeof(type) to be able to use this same code for the structures that + * contain 8bit enum values and be able to deal with pointer types. + */ +#define wlp_set(type, type_code, name) \ +static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value) \ +{ \ + d_fnstart(6, NULL, "(attribute %p)\n", attr); \ + wlp_set_attr_hdr(&attr->hdr, type_code, \ + sizeof(*attr) - sizeof(struct wlp_attr_hdr)); \ + attr->name = value; \ + d_dump(6, NULL, attr, sizeof(*attr)); \ + d_fnend(6, NULL, "(attribute %p)\n", attr); \ + return sizeof(*attr); \ +} + +#define wlp_pset(type, type_code, name) \ +static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value) \ +{ \ + d_fnstart(6, NULL, "(attribute %p)\n", attr); \ + wlp_set_attr_hdr(&attr->hdr, type_code, \ + sizeof(*attr) - sizeof(struct wlp_attr_hdr)); \ + attr->name = *value; \ + d_dump(6, NULL, attr, sizeof(*attr)); \ + d_fnend(6, NULL, "(attribute %p)\n", attr); \ + return sizeof(*attr); \ +} + +/** + * Populate fields of a variable attribute + * + * @returns: total size of attribute including size of new value + * + * Provided with a pointer to the memory area reserved for the + * attribute structure, the field is populated with the value. The + * reserved memory has to contain enough space for the value. + */ +#define wlp_vset(type, type_code, name) \ +static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value, \ + size_t len) \ +{ \ + d_fnstart(6, NULL, "(attribute %p)\n", attr); \ + wlp_set_attr_hdr(&attr->hdr, type_code, len); \ + memcpy(attr->name, value, len); \ + d_dump(6, NULL, attr, sizeof(*attr) + len); \ + d_fnend(6, NULL, "(attribute %p)\n", attr); \ + return sizeof(*attr) + len; \ +} + +wlp_vset(char *, WLP_ATTR_DEV_NAME, dev_name) +wlp_vset(char *, WLP_ATTR_MANUF, manufacturer) +wlp_set(enum wlp_assoc_type, WLP_ATTR_MSG_TYPE, msg_type) +wlp_vset(char *, WLP_ATTR_MODEL_NAME, model_name) +wlp_vset(char *, WLP_ATTR_MODEL_NR, model_nr) +wlp_vset(char *, WLP_ATTR_SERIAL, serial) +wlp_vset(char *, WLP_ATTR_WSS_NAME, wss_name) +wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_E, uuid_e) +wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_R, uuid_r) +wlp_pset(struct wlp_uuid *, WLP_ATTR_WSSID, wssid) +wlp_pset(struct wlp_dev_type *, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type) +/*wlp_pset(struct wlp_dev_type *, WLP_ATTR_SEC_DEV_TYPE, sec_dev_type)*/ +wlp_set(u8, WLP_ATTR_WLP_VER, version) +wlp_set(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err) +wlp_set(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd) +wlp_set(u8, WLP_ATTR_ACC_ENRL, accept_enrl) +wlp_set(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status) +wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_BCAST, wss_bcast) +wlp_pset(struct wlp_nonce *, WLP_ATTR_ENRL_NONCE, enonce) +wlp_pset(struct wlp_nonce *, WLP_ATTR_REG_NONCE, rnonce) +wlp_set(u8, WLP_ATTR_WSS_TAG, wss_tag) +wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_VIRT, wss_virt) + +/** + * Fill in the WSS information attributes + * + * We currently only support one WSS, and this is assumed in this function + * that can populate only one WSS information attribute. + */ +static size_t wlp_set_wss_info(struct wlp_attr_wss_info *attr, + struct wlp_wss *wss) +{ + size_t datalen; + void *ptr = attr->wss_info; + size_t used = sizeof(*attr); + d_fnstart(6, NULL, "(attribute %p)\n", attr); + datalen = sizeof(struct wlp_wss_info) + strlen(wss->name); + wlp_set_attr_hdr(&attr->hdr, WLP_ATTR_WSS_INFO, datalen); + used = wlp_set_wssid(ptr, &wss->wssid); + used += wlp_set_wss_name(ptr + used, wss->name, strlen(wss->name)); + used += wlp_set_accept_enrl(ptr + used, wss->accept_enroll); + used += wlp_set_wss_sec_status(ptr + used, wss->secure_status); + used += wlp_set_wss_bcast(ptr + used, &wss->bcast); + d_dump(6, NULL, attr, sizeof(*attr) + datalen); + d_fnend(6, NULL, "(attribute %p, used %d)\n", + attr, (int)(sizeof(*attr) + used)); + return sizeof(*attr) + used; +} + +/** + * Verify attribute header + * + * @hdr: Pointer to attribute header that will be verified. + * @type: Expected attribute type. + * @len: Expected length of attribute value (excluding header). + * + * Most attribute values have a known length even when they do have a + * length field. This knowledge can be used via this function to verify + * that the length field matches the expected value. + */ +static int wlp_check_attr_hdr(struct wlp *wlp, struct wlp_attr_hdr *hdr, + enum wlp_attr_type type, unsigned len) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + + if (le16_to_cpu(hdr->type) != type) { + dev_err(dev, "WLP: unexpected header type. Expected " + "%u, got %u.\n", type, le16_to_cpu(hdr->type)); + return -EINVAL; + } + if (le16_to_cpu(hdr->length) != len) { + dev_err(dev, "WLP: unexpected length in header. Expected " + "%u, got %u.\n", len, le16_to_cpu(hdr->length)); + return -EINVAL; + } + return 0; +} + +/** + * Check if header of WSS information attribute valid + * + * @returns: length of WSS attributes (value of length attribute field) if + * valid WSS information attribute found + * -ENODATA if no WSS information attribute found + * -EIO other error occured + * + * The WSS information attribute is optional. The function will be provided + * with a pointer to data that could _potentially_ be a WSS information + * attribute. If a valid WSS information attribute is found it will return + * 0, if no WSS information attribute is found it will return -ENODATA, and + * another error will be returned if it is a WSS information attribute, but + * some parsing failure occured. + */ +static int wlp_check_wss_info_attr_hdr(struct wlp *wlp, + struct wlp_attr_hdr *hdr, size_t buflen) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + size_t len; + int result = 0; + + if (buflen < sizeof(*hdr)) { + dev_err(dev, "WLP: Not enough space in buffer to parse" + " WSS information attribute header.\n"); + result = -EIO; + goto out; + } + if (le16_to_cpu(hdr->type) != WLP_ATTR_WSS_INFO) { + /* WSS information is optional */ + result = -ENODATA; + goto out; + } + len = le16_to_cpu(hdr->length); + if (buflen < sizeof(*hdr) + len) { + dev_err(dev, "WLP: Not enough space in buffer to parse " + "variable data. Got %d, expected %d.\n", + (int)buflen, (int)(sizeof(*hdr) + len)); + result = -EIO; + goto out; + } + result = len; +out: + return result; +} + + +/** + * Get value of attribute from fixed size attribute field. + * + * @attr: Pointer to attribute field. + * @value: Pointer to variable in which attribute value will be placed. + * @buflen: Size of buffer in which attribute field (including header) + * can be found. + * @returns: Amount of given buffer consumed by parsing for this attribute. + * + * The size and type of the value is known by the type of the attribute. + */ +#define wlp_get(type, type_code, name) \ +ssize_t wlp_get_##name(struct wlp *wlp, struct wlp_attr_##name *attr, \ + type *value, ssize_t buflen) \ +{ \ + struct device *dev = &wlp->rc->uwb_dev.dev; \ + if (buflen < 0) \ + return -EINVAL; \ + if (buflen < sizeof(*attr)) { \ + dev_err(dev, "WLP: Not enough space in buffer to parse" \ + " attribute field. Need %d, received %zu\n", \ + (int)sizeof(*attr), buflen); \ + return -EIO; \ + } \ + if (wlp_check_attr_hdr(wlp, &attr->hdr, type_code, \ + sizeof(attr->name)) < 0) { \ + dev_err(dev, "WLP: Header verification failed. \n"); \ + return -EINVAL; \ + } \ + *value = attr->name; \ + return sizeof(*attr); \ +} + +#define wlp_get_sparse(type, type_code, name) \ + static wlp_get(type, type_code, name) + +/** + * Get value of attribute from variable sized attribute field. + * + * @max: The maximum size of this attribute. This value is dictated by + * the maximum value from the WLP specification. + * + * @attr: Pointer to attribute field. + * @value: Pointer to variable that will contain the value. The memory + * must already have been allocated for this value. + * @buflen: Size of buffer in which attribute field (including header) + * can be found. + * @returns: Amount of given bufferconsumed by parsing for this attribute. + */ +#define wlp_vget(type_val, type_code, name, max) \ +static ssize_t wlp_get_##name(struct wlp *wlp, \ + struct wlp_attr_##name *attr, \ + type_val *value, ssize_t buflen) \ +{ \ + struct device *dev = &wlp->rc->uwb_dev.dev; \ + size_t len; \ + if (buflen < 0) \ + return -EINVAL; \ + if (buflen < sizeof(*attr)) { \ + dev_err(dev, "WLP: Not enough space in buffer to parse" \ + " header.\n"); \ + return -EIO; \ + } \ + if (le16_to_cpu(attr->hdr.type) != type_code) { \ + dev_err(dev, "WLP: Unexpected attribute type. Got %u, " \ + "expected %u.\n", le16_to_cpu(attr->hdr.type), \ + type_code); \ + return -EINVAL; \ + } \ + len = le16_to_cpu(attr->hdr.length); \ + if (len > max) { \ + dev_err(dev, "WLP: Attribute larger than maximum " \ + "allowed. Received %zu, max is %d.\n", len, \ + (int)max); \ + return -EFBIG; \ + } \ + if (buflen < sizeof(*attr) + len) { \ + dev_err(dev, "WLP: Not enough space in buffer to parse "\ + "variable data.\n"); \ + return -EIO; \ + } \ + memcpy(value, (void *) attr + sizeof(*attr), len); \ + return sizeof(*attr) + len; \ +} + +wlp_get(u8, WLP_ATTR_WLP_VER, version) +wlp_get_sparse(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd) +wlp_get_sparse(struct wlp_dev_type, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type) +wlp_get_sparse(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err) +wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_E, uuid_e) +wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_R, uuid_r) +wlp_get(struct wlp_uuid, WLP_ATTR_WSSID, wssid) +wlp_get_sparse(u8, WLP_ATTR_ACC_ENRL, accept_enrl) +wlp_get_sparse(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status) +wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_BCAST, wss_bcast) +wlp_get_sparse(u8, WLP_ATTR_WSS_TAG, wss_tag) +wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_VIRT, wss_virt) +wlp_get_sparse(struct wlp_nonce, WLP_ATTR_ENRL_NONCE, enonce) +wlp_get_sparse(struct wlp_nonce, WLP_ATTR_REG_NONCE, rnonce) + +/* The buffers for the device info attributes can be found in the + * wlp_device_info struct. These buffers contain one byte more than the + * max allowed by the spec - this is done to be able to add the + * terminating \0 for user display. This terminating byte is not required + * in the actual attribute field (because it has a length field) so the + * maximum allowed for this value is one less than its size in the + * structure. + */ +wlp_vget(char, WLP_ATTR_WSS_NAME, wss_name, + FIELD_SIZEOF(struct wlp_wss, name) - 1) +wlp_vget(char, WLP_ATTR_DEV_NAME, dev_name, + FIELD_SIZEOF(struct wlp_device_info, name) - 1) +wlp_vget(char, WLP_ATTR_MANUF, manufacturer, + FIELD_SIZEOF(struct wlp_device_info, manufacturer) - 1) +wlp_vget(char, WLP_ATTR_MODEL_NAME, model_name, + FIELD_SIZEOF(struct wlp_device_info, model_name) - 1) +wlp_vget(char, WLP_ATTR_MODEL_NR, model_nr, + FIELD_SIZEOF(struct wlp_device_info, model_nr) - 1) +wlp_vget(char, WLP_ATTR_SERIAL, serial, + FIELD_SIZEOF(struct wlp_device_info, serial) - 1) + +/** + * Retrieve WSS Name, Accept enroll, Secure status, Broadcast from WSS info + * + * @attr: pointer to WSS name attribute in WSS information attribute field + * @info: structure that will be populated with data from WSS information + * field (WSS name, Accept enroll, secure status, broadcast address) + * @buflen: size of buffer + * + * Although the WSSID attribute forms part of the WSS info attribute it is + * retrieved separately and stored in a different location. + */ +static ssize_t wlp_get_wss_info_attrs(struct wlp *wlp, + struct wlp_attr_hdr *attr, + struct wlp_wss_tmp_info *info, + ssize_t buflen) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + void *ptr = attr; + size_t used = 0; + ssize_t result = -EINVAL; + + d_printf(6, dev, "WLP: WSS info: Retrieving WSS name\n"); + result = wlp_get_wss_name(wlp, ptr, info->name, buflen); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS name from " + "WSS info in D2 message.\n"); + goto error_parse; + } + used += result; + d_printf(6, dev, "WLP: WSS info: Retrieving accept enroll\n"); + result = wlp_get_accept_enrl(wlp, ptr + used, &info->accept_enroll, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain accepting " + "enrollment from WSS info in D2 message.\n"); + goto error_parse; + } + if (info->accept_enroll != 0 && info->accept_enroll != 1) { + dev_err(dev, "WLP: invalid value for accepting " + "enrollment in D2 message.\n"); + result = -EINVAL; + goto error_parse; + } + used += result; + d_printf(6, dev, "WLP: WSS info: Retrieving secure status\n"); + result = wlp_get_wss_sec_status(wlp, ptr + used, &info->sec_status, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain secure " + "status from WSS info in D2 message.\n"); + goto error_parse; + } + if (info->sec_status != 0 && info->sec_status != 1) { + dev_err(dev, "WLP: invalid value for secure " + "status in D2 message.\n"); + result = -EINVAL; + goto error_parse; + } + used += result; + d_printf(6, dev, "WLP: WSS info: Retrieving broadcast\n"); + result = wlp_get_wss_bcast(wlp, ptr + used, &info->bcast, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain broadcast " + "address from WSS info in D2 message.\n"); + goto error_parse; + } + used += result; + result = used; +error_parse: + return result; +} + +/** + * Create a new WSSID entry for the neighbor, allocate temporary storage + * + * Each neighbor can have many WSS active. We maintain a list of WSSIDs + * advertised by neighbor. During discovery we also cache information about + * these WSS in temporary storage. + * + * The temporary storage will be removed after it has been used (eg. + * displayed to user), the wssid element will be removed from the list when + * the neighbor is rediscovered or when it disappears. + */ +static struct wlp_wssid_e *wlp_create_wssid_e(struct wlp *wlp, + struct wlp_neighbor_e *neighbor) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_wssid_e *wssid_e; + + wssid_e = kzalloc(sizeof(*wssid_e), GFP_KERNEL); + if (wssid_e == NULL) { + dev_err(dev, "WLP: unable to allocate memory " + "for WSS information.\n"); + goto error_alloc; + } + wssid_e->info = kzalloc(sizeof(struct wlp_wss_tmp_info), GFP_KERNEL); + if (wssid_e->info == NULL) { + dev_err(dev, "WLP: unable to allocate memory " + "for temporary WSS information.\n"); + kfree(wssid_e); + wssid_e = NULL; + goto error_alloc; + } + list_add(&wssid_e->node, &neighbor->wssid); +error_alloc: + return wssid_e; +} + +/** + * Parse WSS information attribute + * + * @attr: pointer to WSS information attribute header + * @buflen: size of buffer in which WSS information attribute appears + * @wssid: will place wssid from WSS info attribute in this location + * @wss_info: will place other information from WSS information attribute + * in this location + * + * memory for @wssid and @wss_info must be allocated when calling this + */ +static ssize_t wlp_get_wss_info(struct wlp *wlp, struct wlp_attr_wss_info *attr, + size_t buflen, struct wlp_uuid *wssid, + struct wlp_wss_tmp_info *wss_info) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + ssize_t result; + size_t len; + size_t used = 0; + void *ptr; + + result = wlp_check_wss_info_attr_hdr(wlp, (struct wlp_attr_hdr *)attr, + buflen); + if (result < 0) + goto out; + len = result; + used = sizeof(*attr); + ptr = attr; + d_printf(6, dev, "WLP: WSS info: Retrieving WSSID\n"); + result = wlp_get_wssid(wlp, ptr + used, wssid, buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID from WSS info.\n"); + goto out; + } + used += result; + result = wlp_get_wss_info_attrs(wlp, ptr + used, wss_info, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS information " + "from WSS information attributes. \n"); + goto out; + } + used += result; + if (len + sizeof(*attr) != used) { + dev_err(dev, "WLP: Amount of data parsed does not " + "match length field. Parsed %zu, length " + "field %zu. \n", used, len); + result = -EINVAL; + goto out; + } + result = used; + d_printf(6, dev, "WLP: Successfully parsed WLP information " + "attribute. used %zu bytes\n", used); +out: + return result; +} + +/** + * Retrieve WSS info from association frame + * + * @attr: pointer to WSS information attribute + * @neighbor: ptr to neighbor being discovered, NULL if enrollment in + * progress + * @wss: ptr to WSS being enrolled in, NULL if discovery in progress + * @buflen: size of buffer in which WSS information appears + * + * The WSS information attribute appears in the D2 association message. + * This message is used in two ways: to discover all neighbors or to enroll + * into a WSS activated by a neighbor. During discovery we only want to + * store the WSS info in a cache, to be deleted right after it has been + * used (eg. displayed to the user). During enrollment we store the WSS + * information for the lifetime of enrollment. + * + * During discovery we are interested in all WSS information, during + * enrollment we are only interested in the WSS being enrolled in. Even so, + * when in enrollment we keep parsing the message after finding the WSS of + * interest, this simplifies the calling routine in that it can be sure + * that all WSS information attributes have been parsed out of the message. + * + * Association frame is process with nbmutex held. The list access is safe. + */ +static ssize_t wlp_get_all_wss_info(struct wlp *wlp, + struct wlp_attr_wss_info *attr, + struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, ssize_t buflen) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + size_t used = 0; + ssize_t result = -EINVAL; + struct wlp_attr_wss_info *cur; + struct wlp_uuid wssid; + struct wlp_wss_tmp_info wss_info; + unsigned enroll; /* 0 - discovery to cache, 1 - enrollment */ + struct wlp_wssid_e *wssid_e; + char buf[WLP_WSS_UUID_STRSIZE]; + + d_fnstart(6, dev, "wlp %p, attr %p, neighbor %p, wss %p, buflen %d \n", + wlp, attr, neighbor, wss, (int)buflen); + if (buflen < 0) + goto out; + + if (neighbor != NULL && wss == NULL) + enroll = 0; /* discovery */ + else if (wss != NULL && neighbor == NULL) + enroll = 1; /* enrollment */ + else + goto out; + + cur = attr; + while (buflen - used > 0) { + memset(&wss_info, 0, sizeof(wss_info)); + cur = (void *)cur + used; + result = wlp_get_wss_info(wlp, cur, buflen - used, &wssid, + &wss_info); + if (result == -ENODATA) { + result = used; + goto out; + } else if (result < 0) { + dev_err(dev, "WLP: Unable to parse WSS information " + "from WSS information attribute. \n"); + result = -EINVAL; + goto error_parse; + } + if (enroll && !memcmp(&wssid, &wss->wssid, sizeof(wssid))) { + if (wss_info.accept_enroll != 1) { + dev_err(dev, "WLP: Requested WSS does " + "not accept enrollment.\n"); + result = -EINVAL; + goto out; + } + memcpy(wss->name, wss_info.name, sizeof(wss->name)); + wss->bcast = wss_info.bcast; + wss->secure_status = wss_info.sec_status; + wss->accept_enroll = wss_info.accept_enroll; + wss->state = WLP_WSS_STATE_PART_ENROLLED; + wlp_wss_uuid_print(buf, sizeof(buf), &wssid); + d_printf(2, dev, "WLP: Found WSS %s. Enrolling.\n", + buf); + } else { + wssid_e = wlp_create_wssid_e(wlp, neighbor); + if (wssid_e == NULL) { + dev_err(dev, "WLP: Cannot create new WSSID " + "entry for neighbor %02x:%02x.\n", + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + result = -ENOMEM; + goto out; + } + wssid_e->wssid = wssid; + *wssid_e->info = wss_info; + } + used += result; + } + result = used; +error_parse: + if (result < 0 && !enroll) /* this was a discovery */ + wlp_remove_neighbor_tmp_info(neighbor); +out: + d_fnend(6, dev, "wlp %p, attr %p, neighbor %p, wss %p, buflen %d, " + "result %d \n", wlp, attr, neighbor, wss, (int)buflen, + (int)result); + return result; + +} + +/** + * Parse WSS information attributes into cache for discovery + * + * @attr: the first WSS information attribute in message + * @neighbor: the neighbor whose cache will be populated + * @buflen: size of the input buffer + */ +static ssize_t wlp_get_wss_info_to_cache(struct wlp *wlp, + struct wlp_attr_wss_info *attr, + struct wlp_neighbor_e *neighbor, + ssize_t buflen) +{ + return wlp_get_all_wss_info(wlp, attr, neighbor, NULL, buflen); +} + +/** + * Parse WSS information attributes into WSS struct for enrollment + * + * @attr: the first WSS information attribute in message + * @wss: the WSS that will be enrolled + * @buflen: size of the input buffer + */ +static ssize_t wlp_get_wss_info_to_enroll(struct wlp *wlp, + struct wlp_attr_wss_info *attr, + struct wlp_wss *wss, ssize_t buflen) +{ + return wlp_get_all_wss_info(wlp, attr, NULL, wss, buflen); +} + +/** + * Construct a D1 association frame + * + * We use the radio control functions to determine the values of the device + * properties. These are of variable length and the total space needed is + * tallied first before we start constructing the message. The radio + * control functions return strings that are terminated with \0. This + * character should not be included in the message (there is a length field + * accompanying it in the attribute). + */ +static int wlp_build_assoc_d1(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + struct wlp_device_info *info; + size_t used = 0; + struct wlp_frame_assoc *_d1; + struct sk_buff *_skb; + void *d1_itr; + + d_fnstart(6, dev, "wlp %p\n", wlp); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to setup device " + "information for D1 message.\n"); + goto error; + } + } + info = wlp->dev_info; + d_printf(6, dev, "Local properties:\n" + "Device name (%d bytes): %s\n" + "Model name (%d bytes): %s\n" + "Manufacturer (%d bytes): %s\n" + "Model number (%d bytes): %s\n" + "Serial number (%d bytes): %s\n" + "Primary device type: \n" + " Category: %d \n" + " OUI: %02x:%02x:%02x \n" + " OUI Subdivision: %u \n", + (int)strlen(info->name), info->name, + (int)strlen(info->model_name), info->model_name, + (int)strlen(info->manufacturer), info->manufacturer, + (int)strlen(info->model_nr), info->model_nr, + (int)strlen(info->serial), info->serial, + info->prim_dev_type.category, + info->prim_dev_type.OUI[0], info->prim_dev_type.OUI[1], + info->prim_dev_type.OUI[2], info->prim_dev_type.OUIsubdiv); + _skb = dev_alloc_skb(sizeof(*_d1) + + sizeof(struct wlp_attr_uuid_e) + + sizeof(struct wlp_attr_wss_sel_mthd) + + sizeof(struct wlp_attr_dev_name) + + strlen(info->name) + + sizeof(struct wlp_attr_manufacturer) + + strlen(info->manufacturer) + + sizeof(struct wlp_attr_model_name) + + strlen(info->model_name) + + sizeof(struct wlp_attr_model_nr) + + strlen(info->model_nr) + + sizeof(struct wlp_attr_serial) + + strlen(info->serial) + + sizeof(struct wlp_attr_prim_dev_type) + + sizeof(struct wlp_attr_wlp_assc_err)); + if (_skb == NULL) { + dev_err(dev, "WLP: Cannot allocate memory for association " + "message.\n"); + result = -ENOMEM; + goto error; + } + _d1 = (void *) _skb->data; + d_printf(6, dev, "D1 starts at %p \n", _d1); + _d1->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + _d1->hdr.type = WLP_FRAME_ASSOCIATION; + _d1->type = WLP_ASSOC_D1; + + wlp_set_version(&_d1->version, WLP_VERSION); + wlp_set_msg_type(&_d1->msg_type, WLP_ASSOC_D1); + d1_itr = _d1->attr; + used = wlp_set_uuid_e(d1_itr, &wlp->uuid); + used += wlp_set_wss_sel_mthd(d1_itr + used, WLP_WSS_REG_SELECT); + used += wlp_set_dev_name(d1_itr + used, info->name, + strlen(info->name)); + used += wlp_set_manufacturer(d1_itr + used, info->manufacturer, + strlen(info->manufacturer)); + used += wlp_set_model_name(d1_itr + used, info->model_name, + strlen(info->model_name)); + used += wlp_set_model_nr(d1_itr + used, info->model_nr, + strlen(info->model_nr)); + used += wlp_set_serial(d1_itr + used, info->serial, + strlen(info->serial)); + used += wlp_set_prim_dev_type(d1_itr + used, &info->prim_dev_type); + used += wlp_set_wlp_assc_err(d1_itr + used, WLP_ASSOC_ERROR_NONE); + skb_put(_skb, sizeof(*_d1) + used); + d_printf(6, dev, "D1 message:\n"); + d_dump(6, dev, _d1, sizeof(*_d1) + + sizeof(struct wlp_attr_uuid_e) + + sizeof(struct wlp_attr_wss_sel_mthd) + + sizeof(struct wlp_attr_dev_name) + + strlen(info->name) + + sizeof(struct wlp_attr_manufacturer) + + strlen(info->manufacturer) + + sizeof(struct wlp_attr_model_name) + + strlen(info->model_name) + + sizeof(struct wlp_attr_model_nr) + + strlen(info->model_nr) + + sizeof(struct wlp_attr_serial) + + strlen(info->serial) + + sizeof(struct wlp_attr_prim_dev_type) + + sizeof(struct wlp_attr_wlp_assc_err)); + *skb = _skb; +error: + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} + +/** + * Construct a D2 association frame + * + * We use the radio control functions to determine the values of the device + * properties. These are of variable length and the total space needed is + * tallied first before we start constructing the message. The radio + * control functions return strings that are terminated with \0. This + * character should not be included in the message (there is a length field + * accompanying it in the attribute). + */ +static +int wlp_build_assoc_d2(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb, struct wlp_uuid *uuid_e) +{ + + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + struct wlp_device_info *info; + size_t used = 0; + struct wlp_frame_assoc *_d2; + struct sk_buff *_skb; + void *d2_itr; + size_t mem_needed; + + d_fnstart(6, dev, "wlp %p\n", wlp); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to setup device " + "information for D2 message.\n"); + goto error; + } + } + info = wlp->dev_info; + d_printf(6, dev, "Local properties:\n" + "Device name (%d bytes): %s\n" + "Model name (%d bytes): %s\n" + "Manufacturer (%d bytes): %s\n" + "Model number (%d bytes): %s\n" + "Serial number (%d bytes): %s\n" + "Primary device type: \n" + " Category: %d \n" + " OUI: %02x:%02x:%02x \n" + " OUI Subdivision: %u \n", + (int)strlen(info->name), info->name, + (int)strlen(info->model_name), info->model_name, + (int)strlen(info->manufacturer), info->manufacturer, + (int)strlen(info->model_nr), info->model_nr, + (int)strlen(info->serial), info->serial, + info->prim_dev_type.category, + info->prim_dev_type.OUI[0], info->prim_dev_type.OUI[1], + info->prim_dev_type.OUI[2], info->prim_dev_type.OUIsubdiv); + mem_needed = sizeof(*_d2) + + sizeof(struct wlp_attr_uuid_e) + + sizeof(struct wlp_attr_uuid_r) + + sizeof(struct wlp_attr_dev_name) + + strlen(info->name) + + sizeof(struct wlp_attr_manufacturer) + + strlen(info->manufacturer) + + sizeof(struct wlp_attr_model_name) + + strlen(info->model_name) + + sizeof(struct wlp_attr_model_nr) + + strlen(info->model_nr) + + sizeof(struct wlp_attr_serial) + + strlen(info->serial) + + sizeof(struct wlp_attr_prim_dev_type) + + sizeof(struct wlp_attr_wlp_assc_err); + if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE) + mem_needed += sizeof(struct wlp_attr_wss_info) + + sizeof(struct wlp_wss_info) + + strlen(wlp->wss.name); + _skb = dev_alloc_skb(mem_needed); + if (_skb == NULL) { + dev_err(dev, "WLP: Cannot allocate memory for association " + "message.\n"); + result = -ENOMEM; + goto error; + } + _d2 = (void *) _skb->data; + d_printf(6, dev, "D2 starts at %p \n", _d2); + _d2->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + _d2->hdr.type = WLP_FRAME_ASSOCIATION; + _d2->type = WLP_ASSOC_D2; + + wlp_set_version(&_d2->version, WLP_VERSION); + wlp_set_msg_type(&_d2->msg_type, WLP_ASSOC_D2); + d2_itr = _d2->attr; + used = wlp_set_uuid_e(d2_itr, uuid_e); + used += wlp_set_uuid_r(d2_itr + used, &wlp->uuid); + if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE) + used += wlp_set_wss_info(d2_itr + used, &wlp->wss); + used += wlp_set_dev_name(d2_itr + used, info->name, + strlen(info->name)); + used += wlp_set_manufacturer(d2_itr + used, info->manufacturer, + strlen(info->manufacturer)); + used += wlp_set_model_name(d2_itr + used, info->model_name, + strlen(info->model_name)); + used += wlp_set_model_nr(d2_itr + used, info->model_nr, + strlen(info->model_nr)); + used += wlp_set_serial(d2_itr + used, info->serial, + strlen(info->serial)); + used += wlp_set_prim_dev_type(d2_itr + used, &info->prim_dev_type); + used += wlp_set_wlp_assc_err(d2_itr + used, WLP_ASSOC_ERROR_NONE); + skb_put(_skb, sizeof(*_d2) + used); + d_printf(6, dev, "D2 message:\n"); + d_dump(6, dev, _d2, mem_needed); + *skb = _skb; +error: + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} + +/** + * Allocate memory for and populate fields of F0 association frame + * + * Currently (while focusing on unsecure enrollment) we ignore the + * nonce's that could be placed in the message. Only the error field is + * populated by the value provided by the caller. + */ +static +int wlp_build_assoc_f0(struct wlp *wlp, struct sk_buff **skb, + enum wlp_assc_error error) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -ENOMEM; + struct { + struct wlp_frame_assoc f0_hdr; + struct wlp_attr_enonce enonce; + struct wlp_attr_rnonce rnonce; + struct wlp_attr_wlp_assc_err assc_err; + } *f0; + struct sk_buff *_skb; + struct wlp_nonce tmp; + + d_fnstart(6, dev, "wlp %p\n", wlp); + _skb = dev_alloc_skb(sizeof(*f0)); + if (_skb == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for F0 " + "association frame. \n"); + goto error_alloc; + } + f0 = (void *) _skb->data; + d_printf(6, dev, "F0 starts at %p \n", f0); + f0->f0_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + f0->f0_hdr.hdr.type = WLP_FRAME_ASSOCIATION; + f0->f0_hdr.type = WLP_ASSOC_F0; + wlp_set_version(&f0->f0_hdr.version, WLP_VERSION); + wlp_set_msg_type(&f0->f0_hdr.msg_type, WLP_ASSOC_F0); + memset(&tmp, 0, sizeof(tmp)); + wlp_set_enonce(&f0->enonce, &tmp); + wlp_set_rnonce(&f0->rnonce, &tmp); + wlp_set_wlp_assc_err(&f0->assc_err, error); + skb_put(_skb, sizeof(*f0)); + *skb = _skb; + result = 0; +error_alloc: + d_fnend(6, dev, "wlp %p, result %d \n", wlp, result); + return result; +} + +/** + * Parse F0 frame + * + * We just retrieve the values and print it as an error to the user. + * Calling function already knows an error occured (F0 indicates error), so + * we just parse the content as debug for higher layers. + */ +int wlp_parse_f0(struct wlp *wlp, struct sk_buff *skb) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *f0 = (void *) skb->data; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + struct wlp_nonce enonce, rnonce; + enum wlp_assc_error assc_err; + char enonce_buf[WLP_WSS_NONCE_STRSIZE]; + char rnonce_buf[WLP_WSS_NONCE_STRSIZE]; + + used = sizeof(*f0); + result = wlp_get_enonce(wlp, ptr + used, &enonce, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Enrollee nonce " + "attribute from F0 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_rnonce(wlp, ptr + used, &rnonce, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Registrar nonce " + "attribute from F0 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association error " + "attribute from F0 message.\n"); + goto error_parse; + } + wlp_wss_nonce_print(enonce_buf, sizeof(enonce_buf), &enonce); + wlp_wss_nonce_print(rnonce_buf, sizeof(rnonce_buf), &rnonce); + dev_err(dev, "WLP: Received F0 error frame from neighbor. Enrollee " + "nonce: %s, Registrar nonce: %s, WLP Association error: %s.\n", + enonce_buf, rnonce_buf, wlp_assc_error_str(assc_err)); + result = 0; +error_parse: + return result; +} + +/** + * Retrieve variable device information from association message + * + * The device information parsed is not required in any message. This + * routine will thus not fail if an attribute is not present. + * The attributes are expected in a certain order, even if all are not + * present. The "attribute type" value is used to ensure the attributes + * are parsed in the correct order. + * + * If an error is encountered during parsing the function will return an + * error code, when this happens the given device_info structure may be + * partially filled. + */ +static +int wlp_get_variable_info(struct wlp *wlp, void *data, + struct wlp_device_info *dev_info, ssize_t len) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + size_t used = 0; + struct wlp_attr_hdr *hdr; + ssize_t result = 0; + unsigned last = 0; + + while (len - used > 0) { + if (len - used < sizeof(*hdr)) { + dev_err(dev, "WLP: Partial data in frame, cannot " + "parse. \n"); + goto error_parse; + } + hdr = data + used; + switch (le16_to_cpu(hdr->type)) { + case WLP_ATTR_MANUF: + if (last >= WLP_ATTR_MANUF) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_manufacturer(wlp, data + used, + dev_info->manufacturer, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain " + "Manufacturer attribute from D1 " + "message.\n"); + goto error_parse; + } + last = WLP_ATTR_MANUF; + used += result; + break; + case WLP_ATTR_MODEL_NAME: + if (last >= WLP_ATTR_MODEL_NAME) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_model_name(wlp, data + used, + dev_info->model_name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Model " + "name attribute from D1 message.\n"); + goto error_parse; + } + last = WLP_ATTR_MODEL_NAME; + used += result; + break; + case WLP_ATTR_MODEL_NR: + if (last >= WLP_ATTR_MODEL_NR) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_model_nr(wlp, data + used, + dev_info->model_nr, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Model " + "number attribute from D1 message.\n"); + goto error_parse; + } + last = WLP_ATTR_MODEL_NR; + used += result; + break; + case WLP_ATTR_SERIAL: + if (last >= WLP_ATTR_SERIAL) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_serial(wlp, data + used, + dev_info->serial, len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Serial " + "number attribute from D1 message.\n"); + goto error_parse; + } + last = WLP_ATTR_SERIAL; + used += result; + break; + case WLP_ATTR_PRI_DEV_TYPE: + if (last >= WLP_ATTR_PRI_DEV_TYPE) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_prim_dev_type(wlp, data + used, + &dev_info->prim_dev_type, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Primary " + "device type attribute from D1 " + "message.\n"); + goto error_parse; + } + dev_info->prim_dev_type.category = + le16_to_cpu(dev_info->prim_dev_type.category); + dev_info->prim_dev_type.subID = + le16_to_cpu(dev_info->prim_dev_type.subID); + last = WLP_ATTR_PRI_DEV_TYPE; + used += result; + break; + default: + /* This is not variable device information. */ + goto out; + break; + } + } +out: + return used; +error_parse: + return -EINVAL; +} + +/** + * Parse incoming D1 frame, populate attribute values + * + * Caller provides pointers to memory already allocated for attributes + * expected in the D1 frame. These variables will be populated. + */ +static +int wlp_parse_d1_frame(struct wlp *wlp, struct sk_buff *skb, + struct wlp_uuid *uuid_e, + enum wlp_wss_sel_mthd *sel_mthd, + struct wlp_device_info *dev_info, + enum wlp_assc_error *assc_err) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *d1 = (void *) skb->data; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + + used = sizeof(*d1); + result = wlp_get_uuid_e(wlp, ptr + used, uuid_e, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-E attribute from D1 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wss_sel_mthd(wlp, ptr + used, sel_mthd, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS selection method " + "from D1 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_dev_name(wlp, ptr + used, dev_info->name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Name from D1 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_variable_info(wlp, ptr + used, dev_info, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Information from " + "D1 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association Error " + "Information from D1 message.\n"); + goto error_parse; + } + result = 0; +error_parse: + return result; +} +/** + * Handle incoming D1 frame + * + * The frame has already been verified to contain an Association header with + * the correct version number. Parse the incoming frame, construct and send + * a D2 frame in response. + * + * It is not clear what to do with most fields in the incoming D1 frame. We + * retrieve and discard the information here for now. + */ +void wlp_handle_d1_frame(struct work_struct *ws) +{ + struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, + struct wlp_assoc_frame_ctx, + ws); + struct wlp *wlp = frame_ctx->wlp; + struct wlp_wss *wss = &wlp->wss; + struct sk_buff *skb = frame_ctx->skb; + struct uwb_dev_addr *src = &frame_ctx->src; + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_uuid uuid_e; + enum wlp_wss_sel_mthd sel_mthd = 0; + struct wlp_device_info dev_info; + enum wlp_assc_error assc_err; + char uuid[WLP_WSS_UUID_STRSIZE]; + struct sk_buff *resp = NULL; + + /* Parse D1 frame */ + d_fnstart(6, dev, "WLP: handle D1 frame. wlp = %p, skb = %p\n", + wlp, skb); + mutex_lock(&wss->mutex); + mutex_lock(&wlp->mutex); /* to access wlp->uuid */ + memset(&dev_info, 0, sizeof(dev_info)); + result = wlp_parse_d1_frame(wlp, skb, &uuid_e, &sel_mthd, &dev_info, + &assc_err); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse incoming D1 frame.\n"); + kfree_skb(skb); + goto out; + } + wlp_wss_uuid_print(uuid, sizeof(uuid), &uuid_e); + d_printf(6, dev, "From D1 frame:\n" + "UUID-E: %s\n" + "Selection method: %d\n" + "Device name (%d bytes): %s\n" + "Model name (%d bytes): %s\n" + "Manufacturer (%d bytes): %s\n" + "Model number (%d bytes): %s\n" + "Serial number (%d bytes): %s\n" + "Primary device type: \n" + " Category: %d \n" + " OUI: %02x:%02x:%02x \n" + " OUI Subdivision: %u \n", + uuid, sel_mthd, + (int)strlen(dev_info.name), dev_info.name, + (int)strlen(dev_info.model_name), dev_info.model_name, + (int)strlen(dev_info.manufacturer), dev_info.manufacturer, + (int)strlen(dev_info.model_nr), dev_info.model_nr, + (int)strlen(dev_info.serial), dev_info.serial, + dev_info.prim_dev_type.category, + dev_info.prim_dev_type.OUI[0], + dev_info.prim_dev_type.OUI[1], + dev_info.prim_dev_type.OUI[2], + dev_info.prim_dev_type.OUIsubdiv); + + kfree_skb(skb); + if (!wlp_uuid_is_set(&wlp->uuid)) { + dev_err(dev, "WLP: UUID is not set. Set via sysfs to " + "proceed. Respong to D1 message with error F0.\n"); + result = wlp_build_assoc_f0(wlp, &resp, + WLP_ASSOC_ERROR_NOT_READY); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 message.\n"); + goto out; + } + } else { + /* Construct D2 frame */ + result = wlp_build_assoc_d2(wlp, wss, &resp, &uuid_e); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct D2 message.\n"); + goto out; + } + } + /* Send D2 frame */ + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, resp, src); + if (result < 0) { + dev_err(dev, "WLP: Unable to transmit D2 association " + "message: %d\n", result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_any(resp); /* we need to free if tx fails */ + } +out: + kfree(frame_ctx); + mutex_unlock(&wlp->mutex); + mutex_unlock(&wss->mutex); + d_fnend(6, dev, "WLP: handle D1 frame. wlp = %p\n", wlp); +} + +/** + * Parse incoming D2 frame, create and populate temporary cache + * + * @skb: socket buffer in which D2 frame can be found + * @neighbor: the neighbor that sent the D2 frame + * + * Will allocate memory for temporary storage of information learned during + * discovery. + */ +int wlp_parse_d2_frame_to_cache(struct wlp *wlp, struct sk_buff *skb, + struct wlp_neighbor_e *neighbor) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *d2 = (void *) skb->data; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + struct wlp_uuid uuid_e; + struct wlp_device_info *nb_info; + enum wlp_assc_error assc_err; + + used = sizeof(*d2); + result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 " + "message.\n"); + goto error_parse; + } + if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) { + dev_err(dev, "WLP: UUID-E in incoming D2 does not match " + "local UUID sent in D1. \n"); + goto error_parse; + } + used += result; + result = wlp_get_uuid_r(wlp, ptr + used, &neighbor->uuid, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wss_info_to_cache(wlp, ptr + used, neighbor, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS information " + "from D2 message.\n"); + goto error_parse; + } + used += result; + neighbor->info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL); + if (neighbor->info == NULL) { + dev_err(dev, "WLP: cannot allocate memory to store device " + "info.\n"); + result = -ENOMEM; + goto error_parse; + } + nb_info = neighbor->info; + result = wlp_get_dev_name(wlp, ptr + used, nb_info->name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Name from D2 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_variable_info(wlp, ptr + used, nb_info, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Information from " + "D2 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association Error " + "Information from D2 message.\n"); + goto error_parse; + } + if (assc_err != WLP_ASSOC_ERROR_NONE) { + dev_err(dev, "WLP: neighbor device returned association " + "error %d\n", assc_err); + result = -EINVAL; + goto error_parse; + } + result = 0; +error_parse: + if (result < 0) + wlp_remove_neighbor_tmp_info(neighbor); + return result; +} + +/** + * Parse incoming D2 frame, populate attribute values of WSS bein enrolled in + * + * @wss: our WSS that will be enrolled + * @skb: socket buffer in which D2 frame can be found + * @neighbor: the neighbor that sent the D2 frame + * @wssid: the wssid of the WSS in which we want to enroll + * + * Forms part of enrollment sequence. We are trying to enroll in WSS with + * @wssid by using @neighbor as registrar. A D1 message was sent to + * @neighbor and now we need to parse the D2 response. The neighbor's + * response is searched for the requested WSS and if found (and it accepts + * enrollment), we store the information. + */ +int wlp_parse_d2_frame_to_enroll(struct wlp_wss *wss, struct sk_buff *skb, + struct wlp_neighbor_e *neighbor, + struct wlp_uuid *wssid) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + struct wlp_uuid uuid_e; + struct wlp_uuid uuid_r; + struct wlp_device_info nb_info; + enum wlp_assc_error assc_err; + char uuid_bufA[WLP_WSS_UUID_STRSIZE]; + char uuid_bufB[WLP_WSS_UUID_STRSIZE]; + + used = sizeof(struct wlp_frame_assoc); + result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 " + "message.\n"); + goto error_parse; + } + if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) { + dev_err(dev, "WLP: UUID-E in incoming D2 does not match " + "local UUID sent in D1. \n"); + goto error_parse; + } + used += result; + result = wlp_get_uuid_r(wlp, ptr + used, &uuid_r, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 " + "message.\n"); + goto error_parse; + } + if (memcmp(&uuid_r, &neighbor->uuid, sizeof(uuid_r))) { + wlp_wss_uuid_print(uuid_bufA, sizeof(uuid_bufA), + &neighbor->uuid); + wlp_wss_uuid_print(uuid_bufB, sizeof(uuid_bufB), &uuid_r); + dev_err(dev, "WLP: UUID of neighbor does not match UUID " + "learned during discovery. Originally discovered: %s, " + "now from D2 message: %s\n", uuid_bufA, uuid_bufB); + result = -EINVAL; + goto error_parse; + } + used += result; + wss->wssid = *wssid; + result = wlp_get_wss_info_to_enroll(wlp, ptr + used, wss, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS information " + "from D2 message.\n"); + goto error_parse; + } + if (wss->state != WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: D2 message did not contain information " + "for successful enrollment. \n"); + result = -EINVAL; + goto error_parse; + } + used += result; + /* Place device information on stack to continue parsing of message */ + result = wlp_get_dev_name(wlp, ptr + used, nb_info.name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Name from D2 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_variable_info(wlp, ptr + used, &nb_info, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Information from " + "D2 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association Error " + "Information from D2 message.\n"); + goto error_parse; + } + if (assc_err != WLP_ASSOC_ERROR_NONE) { + dev_err(dev, "WLP: neighbor device returned association " + "error %d\n", assc_err); + if (wss->state == WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: Enrolled in WSS (should not " + "happen according to spec). Undoing. \n"); + wlp_wss_reset(wss); + } + result = -EINVAL; + goto error_parse; + } + result = 0; +error_parse: + return result; +} + +/** + * Parse C3/C4 frame into provided variables + * + * @wssid: will point to copy of wssid retrieved from C3/C4 frame + * @tag: will point to copy of tag retrieved from C3/C4 frame + * @virt_addr: will point to copy of virtual address retrieved from C3/C4 + * frame. + * + * Calling function has to allocate memory for these values. + * + * skb contains a valid C3/C4 frame, return the individual fields of this + * frame in the provided variables. + */ +int wlp_parse_c3c4_frame(struct wlp *wlp, struct sk_buff *skb, + struct wlp_uuid *wssid, u8 *tag, + struct uwb_mac_addr *virt_addr) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + char buf[WLP_WSS_UUID_STRSIZE]; + struct wlp_frame_assoc *assoc = ptr; + + d_fnstart(6, dev, "wlp %p, skb %p \n", wlp, skb); + used = sizeof(*assoc); + result = wlp_get_wssid(wlp, ptr + used, wssid, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID attribute from " + "%s message.\n", wlp_assoc_frame_str(assoc->type)); + goto error_parse; + } + used += result; + result = wlp_get_wss_tag(wlp, ptr + used, tag, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS tag attribute from " + "%s message.\n", wlp_assoc_frame_str(assoc->type)); + goto error_parse; + } + used += result; + result = wlp_get_wss_virt(wlp, ptr + used, virt_addr, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS virtual address " + "attribute from %s message.\n", + wlp_assoc_frame_str(assoc->type)); + goto error_parse; + } + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_printf(6, dev, "WLP: parsed: WSSID %s, tag 0x%02x, virt " + "%02x:%02x:%02x:%02x:%02x:%02x \n", buf, *tag, + virt_addr->data[0], virt_addr->data[1], virt_addr->data[2], + virt_addr->data[3], virt_addr->data[4], virt_addr->data[5]); + +error_parse: + d_fnend(6, dev, "wlp %p, skb %p, result = %d \n", wlp, skb, result); + return result; +} + +/** + * Allocate memory for and populate fields of C1 or C2 association frame + * + * The C1 and C2 association frames appear identical - except for the type. + */ +static +int wlp_build_assoc_c1c2(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb, enum wlp_assoc_type type) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -ENOMEM; + struct { + struct wlp_frame_assoc c_hdr; + struct wlp_attr_wssid wssid; + } *c; + struct sk_buff *_skb; + + d_fnstart(6, dev, "wlp %p, wss %p \n", wlp, wss); + _skb = dev_alloc_skb(sizeof(*c)); + if (_skb == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for C1/C2 " + "association frame. \n"); + goto error_alloc; + } + c = (void *) _skb->data; + d_printf(6, dev, "C1/C2 starts at %p \n", c); + c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION; + c->c_hdr.type = type; + wlp_set_version(&c->c_hdr.version, WLP_VERSION); + wlp_set_msg_type(&c->c_hdr.msg_type, type); + wlp_set_wssid(&c->wssid, &wss->wssid); + skb_put(_skb, sizeof(*c)); + d_printf(6, dev, "C1/C2 message:\n"); + d_dump(6, dev, c, sizeof(*c)); + *skb = _skb; + result = 0; +error_alloc: + d_fnend(6, dev, "wlp %p, wss %p, result %d \n", wlp, wss, result); + return result; +} + + +static +int wlp_build_assoc_c1(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C1); +} + +static +int wlp_build_assoc_c2(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C2); +} + + +/** + * Allocate memory for and populate fields of C3 or C4 association frame + * + * The C3 and C4 association frames appear identical - except for the type. + */ +static +int wlp_build_assoc_c3c4(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb, enum wlp_assoc_type type) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -ENOMEM; + struct { + struct wlp_frame_assoc c_hdr; + struct wlp_attr_wssid wssid; + struct wlp_attr_wss_tag wss_tag; + struct wlp_attr_wss_virt wss_virt; + } *c; + struct sk_buff *_skb; + + d_fnstart(6, dev, "wlp %p, wss %p \n", wlp, wss); + _skb = dev_alloc_skb(sizeof(*c)); + if (_skb == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for C3/C4 " + "association frame. \n"); + goto error_alloc; + } + c = (void *) _skb->data; + d_printf(6, dev, "C3/C4 starts at %p \n", c); + c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION; + c->c_hdr.type = type; + wlp_set_version(&c->c_hdr.version, WLP_VERSION); + wlp_set_msg_type(&c->c_hdr.msg_type, type); + wlp_set_wssid(&c->wssid, &wss->wssid); + wlp_set_wss_tag(&c->wss_tag, wss->tag); + wlp_set_wss_virt(&c->wss_virt, &wss->virtual_addr); + skb_put(_skb, sizeof(*c)); + d_printf(6, dev, "C3/C4 message:\n"); + d_dump(6, dev, c, sizeof(*c)); + *skb = _skb; + result = 0; +error_alloc: + d_fnend(6, dev, "wlp %p, wss %p, result %d \n", wlp, wss, result); + return result; +} + +static +int wlp_build_assoc_c3(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C3); +} + +static +int wlp_build_assoc_c4(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C4); +} + + +#define wlp_send_assoc(type, id) \ +static int wlp_send_assoc_##type(struct wlp *wlp, struct wlp_wss *wss, \ + struct uwb_dev_addr *dev_addr) \ +{ \ + struct device *dev = &wlp->rc->uwb_dev.dev; \ + int result; \ + struct sk_buff *skb = NULL; \ + d_fnstart(6, dev, "wlp %p, wss %p, neighbor: %02x:%02x\n", \ + wlp, wss, dev_addr->data[1], dev_addr->data[0]); \ + d_printf(6, dev, "WLP: Constructing %s frame. \n", \ + wlp_assoc_frame_str(id)); \ + /* Build the frame */ \ + result = wlp_build_assoc_##type(wlp, wss, &skb); \ + if (result < 0) { \ + dev_err(dev, "WLP: Unable to construct %s association " \ + "frame: %d\n", wlp_assoc_frame_str(id), result);\ + goto error_build_assoc; \ + } \ + /* Send the frame */ \ + d_printf(6, dev, "Transmitting %s frame to %02x:%02x \n", \ + wlp_assoc_frame_str(id), \ + dev_addr->data[1], dev_addr->data[0]); \ + BUG_ON(wlp->xmit_frame == NULL); \ + result = wlp->xmit_frame(wlp, skb, dev_addr); \ + if (result < 0) { \ + dev_err(dev, "WLP: Unable to transmit %s association " \ + "message: %d\n", wlp_assoc_frame_str(id), \ + result); \ + if (result == -ENXIO) \ + dev_err(dev, "WLP: Is network interface " \ + "up? \n"); \ + goto error_xmit; \ + } \ + return 0; \ +error_xmit: \ + /* We could try again ... */ \ + dev_kfree_skb_any(skb);/*we need to free if tx fails*/ \ +error_build_assoc: \ + d_fnend(6, dev, "wlp %p, wss %p, neighbor: %02x:%02x\n", \ + wlp, wss, dev_addr->data[1], dev_addr->data[0]); \ + return result; \ +} + +wlp_send_assoc(d1, WLP_ASSOC_D1) +wlp_send_assoc(c1, WLP_ASSOC_C1) +wlp_send_assoc(c3, WLP_ASSOC_C3) + +int wlp_send_assoc_frame(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr, + enum wlp_assoc_type type) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + switch (type) { + case WLP_ASSOC_D1: + result = wlp_send_assoc_d1(wlp, wss, dev_addr); + break; + case WLP_ASSOC_C1: + result = wlp_send_assoc_c1(wlp, wss, dev_addr); + break; + case WLP_ASSOC_C3: + result = wlp_send_assoc_c3(wlp, wss, dev_addr); + break; + default: + dev_err(dev, "WLP: Received request to send unknown " + "association message.\n"); + result = -EINVAL; + break; + } + return result; +} + +/** + * Handle incoming C1 frame + * + * The frame has already been verified to contain an Association header with + * the correct version number. Parse the incoming frame, construct and send + * a C2 frame in response. + */ +void wlp_handle_c1_frame(struct work_struct *ws) +{ + struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, + struct wlp_assoc_frame_ctx, + ws); + struct wlp *wlp = frame_ctx->wlp; + struct wlp_wss *wss = &wlp->wss; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *c1 = (void *) frame_ctx->skb->data; + unsigned int len = frame_ctx->skb->len; + struct uwb_dev_addr *src = &frame_ctx->src; + int result; + struct wlp_uuid wssid; + char buf[WLP_WSS_UUID_STRSIZE]; + struct sk_buff *resp = NULL; + + /* Parse C1 frame */ + d_fnstart(6, dev, "WLP: handle C1 frame. wlp = %p, c1 = %p\n", + wlp, c1); + mutex_lock(&wss->mutex); + result = wlp_get_wssid(wlp, (void *)c1 + sizeof(*c1), &wssid, + len - sizeof(*c1)); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID from C1 frame.\n"); + goto out; + } + wlp_wss_uuid_print(buf, sizeof(buf), &wssid); + d_printf(6, dev, "Received C1 frame with WSSID %s \n", buf); + if (!memcmp(&wssid, &wss->wssid, sizeof(wssid)) + && wss->state == WLP_WSS_STATE_ACTIVE) { + d_printf(6, dev, "WSSID from C1 frame is known locally " + "and is active\n"); + /* Construct C2 frame */ + result = wlp_build_assoc_c2(wlp, wss, &resp); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct C2 message.\n"); + goto out; + } + } else { + d_printf(6, dev, "WSSID from C1 frame is not known locally " + "or is not active\n"); + /* Construct F0 frame */ + result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 message.\n"); + goto out; + } + } + /* Send C2 frame */ + d_printf(6, dev, "Transmitting response (C2/F0) frame to %02x:%02x \n", + src->data[1], src->data[0]); + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, resp, src); + if (result < 0) { + dev_err(dev, "WLP: Unable to transmit response association " + "message: %d\n", result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_any(resp); /* we need to free if tx fails */ + } +out: + kfree_skb(frame_ctx->skb); + kfree(frame_ctx); + mutex_unlock(&wss->mutex); + d_fnend(6, dev, "WLP: handle C1 frame. wlp = %p\n", wlp); +} + +/** + * Handle incoming C3 frame + * + * The frame has already been verified to contain an Association header with + * the correct version number. Parse the incoming frame, construct and send + * a C4 frame in response. If the C3 frame identifies a WSS that is locally + * active then we connect to this neighbor (add it to our EDA cache). + */ +void wlp_handle_c3_frame(struct work_struct *ws) +{ + struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, + struct wlp_assoc_frame_ctx, + ws); + struct wlp *wlp = frame_ctx->wlp; + struct wlp_wss *wss = &wlp->wss; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct sk_buff *skb = frame_ctx->skb; + struct uwb_dev_addr *src = &frame_ctx->src; + int result; + char buf[WLP_WSS_UUID_STRSIZE]; + struct sk_buff *resp = NULL; + struct wlp_uuid wssid; + u8 tag; + struct uwb_mac_addr virt_addr; + + /* Parse C3 frame */ + d_fnstart(6, dev, "WLP: handle C3 frame. wlp = %p, skb = %p\n", + wlp, skb); + mutex_lock(&wss->mutex); + result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain values from C3 frame.\n"); + goto out; + } + wlp_wss_uuid_print(buf, sizeof(buf), &wssid); + d_printf(6, dev, "Received C3 frame with WSSID %s \n", buf); + if (!memcmp(&wssid, &wss->wssid, sizeof(wssid)) + && wss->state >= WLP_WSS_STATE_ACTIVE) { + d_printf(6, dev, "WSSID from C3 frame is known locally " + "and is active\n"); + result = wlp_eda_update_node(&wlp->eda, src, wss, + (void *) virt_addr.data, tag, + WLP_WSS_CONNECTED); + if (result < 0) { + dev_err(dev, "WLP: Unable to update EDA cache " + "with new connected neighbor information.\n"); + result = wlp_build_assoc_f0(wlp, &resp, + WLP_ASSOC_ERROR_INT); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 " + "message.\n"); + goto out; + } + } else { + wss->state = WLP_WSS_STATE_CONNECTED; + /* Construct C4 frame */ + result = wlp_build_assoc_c4(wlp, wss, &resp); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct C4 " + "message.\n"); + goto out; + } + } + } else { + d_printf(6, dev, "WSSID from C3 frame is not known locally " + "or is not active\n"); + /* Construct F0 frame */ + result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 message.\n"); + goto out; + } + } + /* Send C4 frame */ + d_printf(6, dev, "Transmitting response (C4/F0) frame to %02x:%02x \n", + src->data[1], src->data[0]); + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, resp, src); + if (result < 0) { + dev_err(dev, "WLP: Unable to transmit response association " + "message: %d\n", result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_any(resp); /* we need to free if tx fails */ + } +out: + kfree_skb(frame_ctx->skb); + kfree(frame_ctx); + mutex_unlock(&wss->mutex); + d_fnend(6, dev, "WLP: handle C3 frame. wlp = %p, skb = %p\n", + wlp, skb); +} + + diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c new file mode 100644 index 00000000000..1bb9b1f97d4 --- /dev/null +++ b/drivers/uwb/wlp/sysfs.c @@ -0,0 +1,709 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * sysfs functions + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: Docs + * + */ + +#include <linux/wlp.h> +#include "wlp-internal.h" + +static +size_t wlp_wss_wssid_e_print(char *buf, size_t bufsize, + struct wlp_wssid_e *wssid_e) +{ + size_t used = 0; + used += scnprintf(buf, bufsize, " WSS: "); + used += wlp_wss_uuid_print(buf + used, bufsize - used, + &wssid_e->wssid); + + if (wssid_e->info != NULL) { + used += scnprintf(buf + used, bufsize - used, " "); + used += uwb_mac_addr_print(buf + used, bufsize - used, + &wssid_e->info->bcast); + used += scnprintf(buf + used, bufsize - used, " %u %u %s\n", + wssid_e->info->accept_enroll, + wssid_e->info->sec_status, + wssid_e->info->name); + } + return used; +} + +/** + * Print out information learned from neighbor discovery + * + * Some fields being printed may not be included in the device discovery + * information (it is not mandatory). We are thus careful how the + * information is printed to ensure it is clear to the user what field is + * being referenced. + * The information being printed is for one time use - temporary storage is + * cleaned after it is printed. + * + * Ideally sysfs output should be on one line. The information printed here + * contain a few strings so it will be hard to parse if they are all + * printed on the same line - without agreeing on a standard field + * separator. + */ +static +ssize_t wlp_wss_neighborhood_print_remove(struct wlp *wlp, char *buf, + size_t bufsize) +{ + size_t used = 0; + struct wlp_neighbor_e *neighb; + struct wlp_wssid_e *wssid_e; + + mutex_lock(&wlp->nbmutex); + used = scnprintf(buf, bufsize, "#Neighbor information\n" + "#uuid dev_addr\n" + "# Device Name:\n# Model Name:\n# Manufacturer:\n" + "# Model Nr:\n# Serial:\n" + "# Pri Dev type: CategoryID OUI OUISubdiv " + "SubcategoryID\n" + "# WSS: WSSID WSS_name accept_enroll sec_status " + "bcast\n" + "# WSS: WSSID WSS_name accept_enroll sec_status " + "bcast\n\n"); + list_for_each_entry(neighb, &wlp->neighbors, node) { + if (bufsize - used <= 0) + goto out; + used += wlp_wss_uuid_print(buf + used, bufsize - used, + &neighb->uuid); + buf[used++] = ' '; + used += uwb_dev_addr_print(buf + used, bufsize - used, + &neighb->uwb_dev->dev_addr); + if (neighb->info != NULL) + used += scnprintf(buf + used, bufsize - used, + "\n Device Name: %s\n" + " Model Name: %s\n" + " Manufacturer:%s \n" + " Model Nr: %s\n" + " Serial: %s\n" + " Pri Dev type: " + "%u %02x:%02x:%02x %u %u\n", + neighb->info->name, + neighb->info->model_name, + neighb->info->manufacturer, + neighb->info->model_nr, + neighb->info->serial, + neighb->info->prim_dev_type.category, + neighb->info->prim_dev_type.OUI[0], + neighb->info->prim_dev_type.OUI[1], + neighb->info->prim_dev_type.OUI[2], + neighb->info->prim_dev_type.OUIsubdiv, + neighb->info->prim_dev_type.subID); + list_for_each_entry(wssid_e, &neighb->wssid, node) { + used += wlp_wss_wssid_e_print(buf + used, + bufsize - used, + wssid_e); + } + buf[used++] = '\n'; + wlp_remove_neighbor_tmp_info(neighb); + } + + +out: + mutex_unlock(&wlp->nbmutex); + return used; +} + + +/** + * Show properties of all WSS in neighborhood. + * + * Will trigger a complete discovery of WSS activated by this device and + * its neighbors. + */ +ssize_t wlp_neighborhood_show(struct wlp *wlp, char *buf) +{ + wlp_discover(wlp); + return wlp_wss_neighborhood_print_remove(wlp, buf, PAGE_SIZE); +} +EXPORT_SYMBOL_GPL(wlp_neighborhood_show); + +static +ssize_t __wlp_wss_properties_show(struct wlp_wss *wss, char *buf, + size_t bufsize) +{ + ssize_t result; + + result = wlp_wss_uuid_print(buf, bufsize, &wss->wssid); + result += scnprintf(buf + result, bufsize - result, " "); + result += uwb_mac_addr_print(buf + result, bufsize - result, + &wss->bcast); + result += scnprintf(buf + result, bufsize - result, + " 0x%02x %u ", wss->hash, wss->secure_status); + result += wlp_wss_key_print(buf + result, bufsize - result, + wss->master_key); + result += scnprintf(buf + result, bufsize - result, " 0x%02x ", + wss->tag); + result += uwb_mac_addr_print(buf + result, bufsize - result, + &wss->virtual_addr); + result += scnprintf(buf + result, bufsize - result, " %s", wss->name); + result += scnprintf(buf + result, bufsize - result, + "\n\n#WSSID\n#WSS broadcast address\n" + "#WSS hash\n#WSS secure status\n" + "#WSS master key\n#WSS local tag\n" + "#WSS local virtual EUI-48\n#WSS name\n"); + return result; +} + +/** + * Show which WSS is activated. + */ +ssize_t wlp_wss_activate_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + if (wss->state >= WLP_WSS_STATE_ACTIVE) + result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); + else + result = scnprintf(buf, PAGE_SIZE, "No local WSS active.\n"); + result += scnprintf(buf + result, PAGE_SIZE - result, + "\n\n" + "# echo WSSID SECURE_STATUS ACCEPT_ENROLLMENT " + "NAME #create new WSS\n" + "# echo WSSID [DEV ADDR] #enroll in and activate " + "existing WSS, can request registrar\n" + "#\n" + "# WSSID is a 16 byte hex array. Eg. 12 A3 3B ... \n" + "# SECURE_STATUS 0 - unsecure, 1 - secure (default)\n" + "# ACCEPT_ENROLLMENT 0 - no, 1 - yes (default)\n" + "# NAME is the text string identifying the WSS\n" + "# DEV ADDR is the device address of neighbor " + "that should be registrar. Eg. 32:AB\n"); + + mutex_unlock(&wss->mutex); +out: + return result; + +} +EXPORT_SYMBOL_GPL(wlp_wss_activate_show); + +/** + * Create/activate a new WSS or enroll/activate in neighboring WSS + * + * The user can provide the WSSID of a WSS in which it wants to enroll. + * Only the WSSID is necessary if the WSS have been discovered before. If + * the WSS has not been discovered before, or the user wants to use a + * particular neighbor as its registrar, then the user can also provide a + * device address or the neighbor that will be used as registrar. + * + * A new WSS is created when the user provides a WSSID, secure status, and + * WSS name. + */ +ssize_t wlp_wss_activate_store(struct wlp_wss *wss, + const char *buf, size_t size) +{ + ssize_t result = -EINVAL; + struct wlp_uuid wssid; + struct uwb_dev_addr dev; + struct uwb_dev_addr bcast = {.data = {0xff, 0xff} }; + char name[65]; + unsigned sec_status, accept; + memset(name, 0, sizeof(name)); + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx:%02hhx", + &wssid.data[0] , &wssid.data[1], + &wssid.data[2] , &wssid.data[3], + &wssid.data[4] , &wssid.data[5], + &wssid.data[6] , &wssid.data[7], + &wssid.data[8] , &wssid.data[9], + &wssid.data[10], &wssid.data[11], + &wssid.data[12], &wssid.data[13], + &wssid.data[14], &wssid.data[15], + &dev.data[1], &dev.data[0]); + if (result == 16 || result == 17) { + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%u %u %64c", + &wssid.data[0] , &wssid.data[1], + &wssid.data[2] , &wssid.data[3], + &wssid.data[4] , &wssid.data[5], + &wssid.data[6] , &wssid.data[7], + &wssid.data[8] , &wssid.data[9], + &wssid.data[10], &wssid.data[11], + &wssid.data[12], &wssid.data[13], + &wssid.data[14], &wssid.data[15], + &sec_status, &accept, name); + if (result == 16) + result = wlp_wss_enroll_activate(wss, &wssid, &bcast); + else if (result == 19) { + sec_status = sec_status == 0 ? 0 : 1; + accept = accept == 0 ? 0 : 1; + /* We read name using %c, so the newline needs to be + * removed */ + if (strlen(name) != sizeof(name) - 1) + name[strlen(name) - 1] = '\0'; + result = wlp_wss_create_activate(wss, &wssid, name, + sec_status, accept); + } else + result = -EINVAL; + } else if (result == 18) + result = wlp_wss_enroll_activate(wss, &wssid, &dev); + else + result = -EINVAL; + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_wss_activate_store); + +/** + * Show the UUID of this host + */ +ssize_t wlp_uuid_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + + mutex_lock(&wlp->mutex); + result = wlp_wss_uuid_print(buf, PAGE_SIZE, &wlp->uuid); + buf[result++] = '\n'; + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_uuid_show); + +/** + * Store a new UUID for this host + * + * According to the spec this should be encoded as an octet string in the + * order the octets are shown in string representation in RFC 4122 (WLP + * 0.99 [Table 6]) + * + * We do not check value provided by user. + */ +ssize_t wlp_uuid_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + struct wlp_uuid uuid; + + mutex_lock(&wlp->mutex); + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx ", + &uuid.data[0] , &uuid.data[1], + &uuid.data[2] , &uuid.data[3], + &uuid.data[4] , &uuid.data[5], + &uuid.data[6] , &uuid.data[7], + &uuid.data[8] , &uuid.data[9], + &uuid.data[10], &uuid.data[11], + &uuid.data[12], &uuid.data[13], + &uuid.data[14], &uuid.data[15]); + if (result != 16) { + result = -EINVAL; + goto error; + } + wlp->uuid = uuid; +error: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_uuid_store); + +/** + * Show contents of members of device information structure + */ +#define wlp_dev_info_show(type) \ +ssize_t wlp_dev_##type##_show(struct wlp *wlp, char *buf) \ +{ \ + ssize_t result = 0; \ + mutex_lock(&wlp->mutex); \ + if (wlp->dev_info == NULL) { \ + result = __wlp_setup_device_info(wlp); \ + if (result < 0) \ + goto out; \ + } \ + result = scnprintf(buf, PAGE_SIZE, "%s\n", wlp->dev_info->type);\ +out: \ + mutex_unlock(&wlp->mutex); \ + return result; \ +} \ +EXPORT_SYMBOL_GPL(wlp_dev_##type##_show); + +wlp_dev_info_show(name) +wlp_dev_info_show(model_name) +wlp_dev_info_show(model_nr) +wlp_dev_info_show(manufacturer) +wlp_dev_info_show(serial) + +/** + * Store contents of members of device information structure + */ +#define wlp_dev_info_store(type, len) \ +ssize_t wlp_dev_##type##_store(struct wlp *wlp, const char *buf, size_t size)\ +{ \ + ssize_t result; \ + char format[10]; \ + mutex_lock(&wlp->mutex); \ + if (wlp->dev_info == NULL) { \ + result = __wlp_alloc_device_info(wlp); \ + if (result < 0) \ + goto out; \ + } \ + memset(wlp->dev_info->type, 0, sizeof(wlp->dev_info->type)); \ + sprintf(format, "%%%uc", len); \ + result = sscanf(buf, format, wlp->dev_info->type); \ +out: \ + mutex_unlock(&wlp->mutex); \ + return result < 0 ? result : size; \ +} \ +EXPORT_SYMBOL_GPL(wlp_dev_##type##_store); + +wlp_dev_info_store(name, 32) +wlp_dev_info_store(manufacturer, 64) +wlp_dev_info_store(model_name, 32) +wlp_dev_info_store(model_nr, 32) +wlp_dev_info_store(serial, 32) + +static +const char *__wlp_dev_category[] = { + [WLP_DEV_CAT_COMPUTER] = "Computer", + [WLP_DEV_CAT_INPUT] = "Input device", + [WLP_DEV_CAT_PRINT_SCAN_FAX_COPIER] = "Printer, scanner, FAX, or " + "Copier", + [WLP_DEV_CAT_CAMERA] = "Camera", + [WLP_DEV_CAT_STORAGE] = "Storage Network", + [WLP_DEV_CAT_INFRASTRUCTURE] = "Infrastructure", + [WLP_DEV_CAT_DISPLAY] = "Display", + [WLP_DEV_CAT_MULTIM] = "Multimedia device", + [WLP_DEV_CAT_GAMING] = "Gaming device", + [WLP_DEV_CAT_TELEPHONE] = "Telephone", + [WLP_DEV_CAT_OTHER] = "Other", +}; + +static +const char *wlp_dev_category_str(unsigned cat) +{ + if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) + || cat == WLP_DEV_CAT_OTHER) + return __wlp_dev_category[cat]; + return "unknown category"; +} + +ssize_t wlp_dev_prim_category_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%s\n", + wlp_dev_category_str(wlp->dev_info->prim_dev_type.category)); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_category_show); + +ssize_t wlp_dev_prim_category_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + u16 cat; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%hu", &cat); + if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) + || cat == WLP_DEV_CAT_OTHER) + wlp->dev_info->prim_dev_type.category = cat; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_category_store); + +ssize_t wlp_dev_prim_OUI_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%02x:%02x:%02x\n", + wlp->dev_info->prim_dev_type.OUI[0], + wlp->dev_info->prim_dev_type.OUI[1], + wlp->dev_info->prim_dev_type.OUI[2]); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_show); + +ssize_t wlp_dev_prim_OUI_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + u8 OUI[3]; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%hhx:%hhx:%hhx", + &OUI[0], &OUI[1], &OUI[2]); + if (result != 3) { + result = -EINVAL; + goto out; + } else + memcpy(wlp->dev_info->prim_dev_type.OUI, OUI, sizeof(OUI)); +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_store); + + +ssize_t wlp_dev_prim_OUI_sub_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%u\n", + wlp->dev_info->prim_dev_type.OUIsubdiv); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_show); + +ssize_t wlp_dev_prim_OUI_sub_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + unsigned sub; + u8 max_sub = ~0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%u", &sub); + if (sub <= max_sub) + wlp->dev_info->prim_dev_type.OUIsubdiv = sub; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_store); + +ssize_t wlp_dev_prim_subcat_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%u\n", + wlp->dev_info->prim_dev_type.subID); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_show); + +ssize_t wlp_dev_prim_subcat_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + unsigned sub; + __le16 max_sub = ~0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%u", &sub); + if (sub <= max_sub) + wlp->dev_info->prim_dev_type.subID = sub; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_store); + +/** + * Subsystem implementation for interaction with individual WSS via sysfs + * + * Followed instructions for subsystem in Documentation/filesystems/sysfs.txt + */ + +#define kobj_to_wlp_wss(obj) container_of(obj, struct wlp_wss, kobj) +#define attr_to_wlp_wss_attr(_attr) \ + container_of(_attr, struct wlp_wss_attribute, attr) + +/** + * Sysfs subsystem: forward read calls + * + * Sysfs operation for forwarding read call to the show method of the + * attribute owner + */ +static +ssize_t wlp_wss_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); + struct wlp_wss *wss = kobj_to_wlp_wss(kobj); + ssize_t ret = -EIO; + + if (wss_attr->show) + ret = wss_attr->show(wss, buf); + return ret; +} +/** + * Sysfs subsystem: forward write calls + * + * Sysfs operation for forwarding write call to the store method of the + * attribute owner + */ +static +ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); + struct wlp_wss *wss = kobj_to_wlp_wss(kobj); + ssize_t ret = -EIO; + + if (wss_attr->store) + ret = wss_attr->store(wss, buf, count); + return ret; +} + +static +struct sysfs_ops wss_sysfs_ops = { + .show = wlp_wss_attr_show, + .store = wlp_wss_attr_store, +}; + +struct kobj_type wss_ktype = { + .release = wlp_wss_release, + .sysfs_ops = &wss_sysfs_ops, +}; + + +/** + * Sysfs files for individual WSS + */ + +/** + * Print static properties of this WSS + * + * The name of a WSS may not be null teminated. It's max size is 64 bytes + * so we copy it to a larger array just to make sure we print sane data. + */ +static ssize_t wlp_wss_properties_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); + mutex_unlock(&wss->mutex); +out: + return result; +} +WSS_ATTR(properties, S_IRUGO, wlp_wss_properties_show, NULL); + +/** + * Print all connected members of this WSS + * The EDA cache contains all members of WSS neighborhood. + */ +static ssize_t wlp_wss_members_show(struct wlp_wss *wss, char *buf) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + return wlp_eda_show(wlp, buf); +} +WSS_ATTR(members, S_IRUGO, wlp_wss_members_show, NULL); + +static +const char *__wlp_strstate[] = { + "none", + "partially enrolled", + "enrolled", + "active", + "connected", +}; + +static const char *wlp_wss_strstate(unsigned state) +{ + if (state >= ARRAY_SIZE(__wlp_strstate)) + return "unknown state"; + return __wlp_strstate[state]; +} + +/* + * Print current state of this WSS + */ +static ssize_t wlp_wss_state_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + result = scnprintf(buf, PAGE_SIZE, "%s\n", + wlp_wss_strstate(wss->state)); + mutex_unlock(&wss->mutex); +out: + return result; +} +WSS_ATTR(state, S_IRUGO, wlp_wss_state_show, NULL); + + +static +struct attribute *wss_attrs[] = { + &wss_attr_properties.attr, + &wss_attr_members.attr, + &wss_attr_state.attr, + NULL, +}; + +struct attribute_group wss_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wss_attrs, +}; diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c new file mode 100644 index 00000000000..c701bd1a288 --- /dev/null +++ b/drivers/uwb/wlp/txrx.c @@ -0,0 +1,374 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Message exchange infrastructure + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: Docs + * + */ + +#include <linux/etherdevice.h> +#include <linux/wlp.h> +#define D_LOCAL 5 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +/** + * Direct incoming association msg to correct parsing routine + * + * We only expect D1, E1, C1, C3 messages as new. All other incoming + * association messages should form part of an established session that is + * handled elsewhere. + * The handling of these messages often require calling sleeping functions + * - this cannot be done in interrupt context. We use the kernel's + * workqueue to handle these messages. + */ +static +void wlp_direct_assoc_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *assoc = (void *) skb->data; + struct wlp_assoc_frame_ctx *frame_ctx; + d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb); + frame_ctx = kmalloc(sizeof(*frame_ctx), GFP_ATOMIC); + if (frame_ctx == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for association " + "frame handling.\n"); + kfree_skb(skb); + goto out; + } + frame_ctx->wlp = wlp; + frame_ctx->skb = skb; + frame_ctx->src = *src; + switch (assoc->type) { + case WLP_ASSOC_D1: + d_printf(5, dev, "Received a D1 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_d1_frame); + schedule_work(&frame_ctx->ws); + break; + case WLP_ASSOC_E1: + d_printf(5, dev, "Received a E1 frame. FIXME?\n"); + kfree_skb(skb); /* Temporary until we handle it */ + kfree(frame_ctx); /* Temporary until we handle it */ + break; + case WLP_ASSOC_C1: + d_printf(5, dev, "Received a C1 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_c1_frame); + schedule_work(&frame_ctx->ws); + break; + case WLP_ASSOC_C3: + d_printf(5, dev, "Received a C3 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_c3_frame); + schedule_work(&frame_ctx->ws); + break; + default: + dev_err(dev, "Received unexpected association frame. " + "Type = %d \n", assoc->type); + kfree_skb(skb); + kfree(frame_ctx); + break; + } +out: + d_fnend(5, dev, "wlp %p\n", wlp); +} + +/** + * Process incoming association frame + * + * Although it could be possible to deal with some incoming association + * messages without creating a new session we are keeping things simple. We + * do not accept new association messages if there is a session in progress + * and the messages do not belong to that session. + * + * If an association message arrives that causes the creation of a session + * (WLP_ASSOC_E1) while we are in the process of creating a session then we + * rely on the neighbor mutex to protect the data. That is, the new session + * will not be started until the previous is completed. + */ +static +void wlp_receive_assoc_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *assoc = (void *) skb->data; + struct wlp_session *session = wlp->session; + u8 version; + d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb); + + if (wlp_get_version(wlp, &assoc->version, &version, + sizeof(assoc->version)) < 0) + goto error; + if (version != WLP_VERSION) { + dev_err(dev, "Unsupported WLP version in association " + "message.\n"); + goto error; + } + if (session != NULL) { + /* Function that created this session is still holding the + * &wlp->mutex to protect this session. */ + if (assoc->type == session->exp_message || + assoc->type == WLP_ASSOC_F0) { + if (!memcmp(&session->neighbor_addr, src, + sizeof(*src))) { + session->data = skb; + (session->cb)(wlp); + } else { + dev_err(dev, "Received expected message from " + "unexpected source. Expected message " + "%d or F0 from %02x:%02x, but received " + "it from %02x:%02x. Dropping.\n", + session->exp_message, + session->neighbor_addr.data[1], + session->neighbor_addr.data[0], + src->data[1], src->data[0]); + goto error; + } + } else { + dev_err(dev, "Association already in progress. " + "Dropping.\n"); + goto error; + } + } else { + wlp_direct_assoc_frame(wlp, skb, src); + } + d_fnend(5, dev, "wlp %p\n", wlp); + return; +error: + kfree_skb(skb); + d_fnend(5, dev, "wlp %p\n", wlp); +} + +/** + * Verify incoming frame is from connected neighbor, prep to pass to WLP client + * + * Verification proceeds according to WLP 0.99 [7.3.1]. The source address + * is used to determine which neighbor is sending the frame and the WSS tag + * is used to know to which WSS the frame belongs (we only support one WSS + * so this test is straight forward). + * With the WSS found we need to ensure that we are connected before + * allowing the exchange of data frames. + */ +static +int wlp_verify_prep_rx_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -EINVAL; + struct wlp_eda_node eda_entry; + struct wlp_frame_std_abbrv_hdr *hdr = (void *) skb->data; + + d_fnstart(6, dev, "wlp %p, skb %p \n", wlp, skb); + /*verify*/ + result = wlp_copy_eda_node(&wlp->eda, src, &eda_entry); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Incoming frame is from unknown " + "neighbor %02x:%02x.\n", src->data[1], + src->data[0]); + goto out; + } + if (hdr->tag != eda_entry.tag) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Tag of incoming frame from " + "%02x:%02x does not match expected tag. " + "Received 0x%02x, expected 0x%02x. \n", + src->data[1], src->data[0], hdr->tag, + eda_entry.tag); + result = -EINVAL; + goto out; + } + if (eda_entry.state != WLP_WSS_CONNECTED) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Incoming frame from " + "%02x:%02x does is not from connected WSS.\n", + src->data[1], src->data[0]); + result = -EINVAL; + goto out; + } + /*prep*/ + skb_pull(skb, sizeof(*hdr)); +out: + d_fnend(6, dev, "wlp %p, skb %p, result = %d \n", wlp, skb, result); + return result; +} + +/** + * Receive a WLP frame from device + * + * @returns: 1 if calling function should free the skb + * 0 if it successfully handled skb and freed it + * 0 if error occured, will free skb in this case + */ +int wlp_receive_frame(struct device *dev, struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + unsigned len = skb->len; + void *ptr = skb->data; + struct wlp_frame_hdr *hdr; + int result = 0; + + d_fnstart(6, dev, "skb (%p), len (%u)\n", skb, len); + if (len < sizeof(*hdr)) { + dev_err(dev, "Not enough data to parse WLP header.\n"); + result = -EINVAL; + goto out; + } + hdr = ptr; + d_dump(6, dev, hdr, sizeof(*hdr)); + if (le16_to_cpu(hdr->mux_hdr) != WLP_PROTOCOL_ID) { + dev_err(dev, "Not a WLP frame type.\n"); + result = -EINVAL; + goto out; + } + switch (hdr->type) { + case WLP_FRAME_STANDARD: + if (len < sizeof(struct wlp_frame_std_abbrv_hdr)) { + dev_err(dev, "Not enough data to parse Standard " + "WLP header.\n"); + goto out; + } + result = wlp_verify_prep_rx_frame(wlp, skb, src); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Verification of frame " + "from neighbor %02x:%02x failed.\n", + src->data[1], src->data[0]); + goto out; + } + result = 1; + break; + case WLP_FRAME_ABBREVIATED: + dev_err(dev, "Abbreviated frame received. FIXME?\n"); + kfree_skb(skb); + break; + case WLP_FRAME_CONTROL: + dev_err(dev, "Control frame received. FIXME?\n"); + kfree_skb(skb); + break; + case WLP_FRAME_ASSOCIATION: + if (len < sizeof(struct wlp_frame_assoc)) { + dev_err(dev, "Not enough data to parse Association " + "WLP header.\n"); + goto out; + } + d_printf(5, dev, "Association frame received.\n"); + wlp_receive_assoc_frame(wlp, skb, src); + break; + default: + dev_err(dev, "Invalid frame received.\n"); + result = -EINVAL; + break; + } +out: + if (result < 0) { + kfree_skb(skb); + result = 0; + } + d_fnend(6, dev, "skb (%p)\n", skb); + return result; +} +EXPORT_SYMBOL_GPL(wlp_receive_frame); + + +/** + * Verify frame from network stack, prepare for further transmission + * + * @skb: the socket buffer that needs to be prepared for transmission (it + * is in need of a WLP header). If this is a broadcast frame we take + * over the entire transmission. + * If it is a unicast the WSS connection should already be established + * and transmission will be done by the calling function. + * @dst: On return this will contain the device address to which the + * frame is destined. + * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer, + * calling function can proceed with tx + * 1 on success with tx : WLP will take over transmission of this + * frame + * <0 on error + * + * The network stack (WLP client) is attempting to transmit a frame. We can + * only transmit data if a local WSS is at least active (connection will be + * done here if this is a broadcast frame and neighbor also has the WSS + * active). + * + * The frame can be either broadcast or unicast. Broadcast in a WSS is + * supported via multicast, but we don't support multicast yet (until + * devices start to support MAB IEs). If a broadcast frame needs to be + * transmitted it is treated as a unicast frame to each neighbor. In this + * case the WLP takes over transmission of the skb and returns 1 + * to the caller to indicate so. Also, in this case, if a neighbor has the + * same WSS activated but is not connected then the WSS connection will be + * done at this time. The neighbor's virtual address will be learned at + * this time. + * + * The destination address in a unicast frame is the virtual address of the + * neighbor. This address only becomes known when a WSS connection is + * established. We thus rely on a broadcast frame to trigger the setup of + * WSS connections to all neighbors before we are able to send unicast + * frames to them. This seems reasonable as IP would usually use ARP first + * before any unicast frames are sent. + * + * If we are already connected to the neighbor (neighbor's virtual address + * is known) we just prepare the WLP header and the caller will continue to + * send the frame. + * + * A failure in this function usually indicates something that cannot be + * fixed automatically. So, if this function fails (@return < 0) the calling + * function should not retry to send the frame as it will very likely keep + * failing. + * + */ +int wlp_prepare_tx_frame(struct device *dev, struct wlp *wlp, + struct sk_buff *skb, struct uwb_dev_addr *dst) +{ + int result = -EINVAL; + struct ethhdr *eth_hdr = (void *) skb->data; + + d_fnstart(6, dev, "wlp (%p), skb (%p) \n", wlp, skb); + if (is_broadcast_ether_addr(eth_hdr->h_dest)) { + d_printf(6, dev, "WLP: handling broadcast frame. \n"); + result = wlp_eda_for_each(&wlp->eda, wlp_wss_send_copy, skb); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "Unable to handle broadcast " + "frame from WLP client.\n"); + goto out; + } + dev_kfree_skb_irq(skb); + result = 1; + /* Frame will be transmitted by WLP. */ + } else { + d_printf(6, dev, "WLP: handling unicast frame. \n"); + result = wlp_eda_for_virtual(&wlp->eda, eth_hdr->h_dest, dst, + wlp_wss_prep_hdr, skb); + if (unlikely(result < 0)) { + if (printk_ratelimit()) + dev_err(dev, "Unable to prepare " + "skb for transmission. \n"); + goto out; + } + } +out: + d_fnend(6, dev, "wlp (%p), skb (%p). result = %d \n", wlp, skb, result); + return result; +} +EXPORT_SYMBOL_GPL(wlp_prepare_tx_frame); diff --git a/drivers/uwb/wlp/wlp-internal.h b/drivers/uwb/wlp/wlp-internal.h new file mode 100644 index 00000000000..1c94fabfb1a --- /dev/null +++ b/drivers/uwb/wlp/wlp-internal.h @@ -0,0 +1,228 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Internal API + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ + +#ifndef __WLP_INTERNAL_H__ +#define __WLP_INTERNAL_H__ + +/** + * State of WSS connection + * + * A device needs to connect to a neighbor in an activated WSS before data + * can be transmitted. The spec also distinguishes between a new connection + * attempt and a connection attempt after previous connection attempts. The + * state WLP_WSS_CONNECT_FAILED is used for this scenario. See WLP 0.99 + * [7.2.6] + */ +enum wlp_wss_connect { + WLP_WSS_UNCONNECTED = 0, + WLP_WSS_CONNECTED, + WLP_WSS_CONNECT_FAILED, +}; + +extern struct kobj_type wss_ktype; +extern struct attribute_group wss_attr_group; + +extern int uwb_rc_ie_add(struct uwb_rc *, const struct uwb_ie_hdr *, size_t); +extern int uwb_rc_ie_rm(struct uwb_rc *, enum uwb_ie); + + +/* This should be changed to a dynamic array where entries are sorted + * by eth_addr and search is done in a binary form + * + * Although thinking twice about it: this technologie's maximum reach + * is 10 meters...unless you want to pack too much stuff in around + * your radio controller/WLP device, the list will probably not be + * too big. + * + * In any case, there is probably some data structure in the kernel + * than we could reused for that already. + * + * The below structure is really just good while we support one WSS per + * host. + */ +struct wlp_eda_node { + struct list_head list_node; + unsigned char eth_addr[ETH_ALEN]; + struct uwb_dev_addr dev_addr; + struct wlp_wss *wss; + unsigned char virt_addr[ETH_ALEN]; + u8 tag; + enum wlp_wss_connect state; +}; + +typedef int (*wlp_eda_for_each_f)(struct wlp *, struct wlp_eda_node *, void *); + +extern void wlp_eda_init(struct wlp_eda *); +extern void wlp_eda_release(struct wlp_eda *); +extern int wlp_eda_create_node(struct wlp_eda *, + const unsigned char eth_addr[ETH_ALEN], + const struct uwb_dev_addr *); +extern void wlp_eda_rm_node(struct wlp_eda *, const struct uwb_dev_addr *); +extern int wlp_eda_update_node(struct wlp_eda *, + const struct uwb_dev_addr *, + struct wlp_wss *, + const unsigned char virt_addr[ETH_ALEN], + const u8, const enum wlp_wss_connect); +extern int wlp_eda_update_node_state(struct wlp_eda *, + const struct uwb_dev_addr *, + const enum wlp_wss_connect); + +extern int wlp_copy_eda_node(struct wlp_eda *, struct uwb_dev_addr *, + struct wlp_eda_node *); +extern int wlp_eda_for_each(struct wlp_eda *, wlp_eda_for_each_f , void *); +extern int wlp_eda_for_virtual(struct wlp_eda *, + const unsigned char eth_addr[ETH_ALEN], + struct uwb_dev_addr *, + wlp_eda_for_each_f , void *); + + +extern void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *); + +extern size_t wlp_wss_key_print(char *, size_t, u8 *); + +/* Function called when no more references to WSS exists */ +extern void wlp_wss_release(struct kobject *); + +extern void wlp_wss_reset(struct wlp_wss *); +extern int wlp_wss_create_activate(struct wlp_wss *, struct wlp_uuid *, + char *, unsigned, unsigned); +extern int wlp_wss_enroll_activate(struct wlp_wss *, struct wlp_uuid *, + struct uwb_dev_addr *); +extern ssize_t wlp_discover(struct wlp *); + +extern int wlp_enroll_neighbor(struct wlp *, struct wlp_neighbor_e *, + struct wlp_wss *, struct wlp_uuid *); +extern int wlp_wss_is_active(struct wlp *, struct wlp_wss *, + struct uwb_dev_addr *); + +struct wlp_assoc_conn_ctx { + struct work_struct ws; + struct wlp *wlp; + struct sk_buff *skb; + struct wlp_eda_node eda_entry; +}; + + +extern int wlp_wss_connect_prep(struct wlp *, struct wlp_eda_node *, void *); +extern int wlp_wss_send_copy(struct wlp *, struct wlp_eda_node *, void *); + + +/* Message handling */ +struct wlp_assoc_frame_ctx { + struct work_struct ws; + struct wlp *wlp; + struct sk_buff *skb; + struct uwb_dev_addr src; +}; + +extern int wlp_wss_prep_hdr(struct wlp *, struct wlp_eda_node *, void *); +extern void wlp_handle_d1_frame(struct work_struct *); +extern int wlp_parse_d2_frame_to_cache(struct wlp *, struct sk_buff *, + struct wlp_neighbor_e *); +extern int wlp_parse_d2_frame_to_enroll(struct wlp_wss *, struct sk_buff *, + struct wlp_neighbor_e *, + struct wlp_uuid *); +extern void wlp_handle_c1_frame(struct work_struct *); +extern void wlp_handle_c3_frame(struct work_struct *); +extern int wlp_parse_c3c4_frame(struct wlp *, struct sk_buff *, + struct wlp_uuid *, u8 *, + struct uwb_mac_addr *); +extern int wlp_parse_f0(struct wlp *, struct sk_buff *); +extern int wlp_send_assoc_frame(struct wlp *, struct wlp_wss *, + struct uwb_dev_addr *, enum wlp_assoc_type); +extern ssize_t wlp_get_version(struct wlp *, struct wlp_attr_version *, + u8 *, ssize_t); +extern ssize_t wlp_get_wssid(struct wlp *, struct wlp_attr_wssid *, + struct wlp_uuid *, ssize_t); +extern int __wlp_alloc_device_info(struct wlp *); +extern int __wlp_setup_device_info(struct wlp *); + +extern struct wlp_wss_attribute wss_attribute_properties; +extern struct wlp_wss_attribute wss_attribute_members; +extern struct wlp_wss_attribute wss_attribute_state; + +static inline +size_t wlp_wss_uuid_print(char *buf, size_t bufsize, struct wlp_uuid *uuid) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x:%02x:%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x", + uuid->data[0], uuid->data[1], + uuid->data[2], uuid->data[3], + uuid->data[4], uuid->data[5], + uuid->data[6], uuid->data[7], + uuid->data[8], uuid->data[9], + uuid->data[10], uuid->data[11], + uuid->data[12], uuid->data[13], + uuid->data[14], uuid->data[15]); + return result; +} + +/** + * FIXME: How should a nonce be displayed? + */ +static inline +size_t wlp_wss_nonce_print(char *buf, size_t bufsize, struct wlp_nonce *nonce) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x", + nonce->data[0], nonce->data[1], + nonce->data[2], nonce->data[3], + nonce->data[4], nonce->data[5], + nonce->data[6], nonce->data[7], + nonce->data[8], nonce->data[9], + nonce->data[10], nonce->data[11], + nonce->data[12], nonce->data[13], + nonce->data[14], nonce->data[15]); + return result; +} + + +static inline +void wlp_session_cb(struct wlp *wlp) +{ + struct completion *completion = wlp->session->cb_priv; + complete(completion); +} + +static inline +int wlp_uuid_is_set(struct wlp_uuid *uuid) +{ + struct wlp_uuid zero_uuid = { .data = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00} }; + + if (!memcmp(uuid, &zero_uuid, sizeof(*uuid))) + return 0; + return 1; +} + +#endif /* __WLP_INTERNAL_H__ */ diff --git a/drivers/uwb/wlp/wlp-lc.c b/drivers/uwb/wlp/wlp-lc.c new file mode 100644 index 00000000000..0799402e73f --- /dev/null +++ b/drivers/uwb/wlp/wlp-lc.c @@ -0,0 +1,585 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2005-2006 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/wlp.h> +#define D_LOCAL 6 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +static +void wlp_neighbor_init(struct wlp_neighbor_e *neighbor) +{ + INIT_LIST_HEAD(&neighbor->wssid); +} + +/** + * Create area for device information storage + * + * wlp->mutex must be held + */ +int __wlp_alloc_device_info(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + BUG_ON(wlp->dev_info != NULL); + wlp->dev_info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL); + if (wlp->dev_info == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for " + "device information.\n"); + return -ENOMEM; + } + return 0; +} + + +/** + * Fill in device information using function provided by driver + * + * wlp->mutex must be held + */ +static +void __wlp_fill_device_info(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + + BUG_ON(wlp->fill_device_info == NULL); + d_printf(6, dev, "Retrieving device information " + "from device driver.\n"); + wlp->fill_device_info(wlp, wlp->dev_info); +} + +/** + * Setup device information + * + * Allocate area for device information and populate it. + * + * wlp->mutex must be held + */ +int __wlp_setup_device_info(struct wlp *wlp) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + + result = __wlp_alloc_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to allocate area for " + "device information.\n"); + return result; + } + __wlp_fill_device_info(wlp); + return 0; +} + +/** + * Remove information about neighbor stored temporarily + * + * Information learned during discovey should only be stored when the + * device enrolls in the neighbor's WSS. We do need to store this + * information temporarily in order to present it to the user. + * + * We are only interested in keeping neighbor WSS information if that + * neighbor is accepting enrollment. + * + * should be called with wlp->nbmutex held + */ +void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *neighbor) +{ + struct wlp_wssid_e *wssid_e, *next; + u8 keep; + if (!list_empty(&neighbor->wssid)) { + list_for_each_entry_safe(wssid_e, next, &neighbor->wssid, + node) { + if (wssid_e->info != NULL) { + keep = wssid_e->info->accept_enroll; + kfree(wssid_e->info); + wssid_e->info = NULL; + if (!keep) { + list_del(&wssid_e->node); + kfree(wssid_e); + } + } + } + } + if (neighbor->info != NULL) { + kfree(neighbor->info); + neighbor->info = NULL; + } +} + +/** + * Populate WLP neighborhood cache with neighbor information + * + * A new neighbor is found. If it is discoverable then we add it to the + * neighborhood cache. + * + */ +static +int wlp_add_neighbor(struct wlp *wlp, struct uwb_dev *dev) +{ + int result = 0; + int discoverable; + struct wlp_neighbor_e *neighbor; + + d_fnstart(6, &dev->dev, "uwb %p \n", dev); + d_printf(6, &dev->dev, "Found neighbor device %02x:%02x \n", + dev->dev_addr.data[1], dev->dev_addr.data[0]); + /** + * FIXME: + * Use contents of WLP IE found in beacon cache to determine if + * neighbor is discoverable. + * The device does not support WLP IE yet so this still needs to be + * done. Until then we assume all devices are discoverable. + */ + discoverable = 1; /* will be changed when FIXME disappears */ + if (discoverable) { + /* Add neighbor to cache for discovery */ + neighbor = kzalloc(sizeof(*neighbor), GFP_KERNEL); + if (neighbor == NULL) { + dev_err(&dev->dev, "Unable to create memory for " + "new neighbor. \n"); + result = -ENOMEM; + goto error_no_mem; + } + wlp_neighbor_init(neighbor); + uwb_dev_get(dev); + neighbor->uwb_dev = dev; + list_add(&neighbor->node, &wlp->neighbors); + } +error_no_mem: + d_fnend(6, &dev->dev, "uwb %p, result = %d \n", dev, result); + return result; +} + +/** + * Remove one neighbor from cache + */ +static +void __wlp_neighbor_release(struct wlp_neighbor_e *neighbor) +{ + struct wlp_wssid_e *wssid_e, *next_wssid_e; + + list_for_each_entry_safe(wssid_e, next_wssid_e, + &neighbor->wssid, node) { + list_del(&wssid_e->node); + kfree(wssid_e); + } + uwb_dev_put(neighbor->uwb_dev); + list_del(&neighbor->node); + kfree(neighbor); +} + +/** + * Clear entire neighborhood cache. + */ +static +void __wlp_neighbors_release(struct wlp *wlp) +{ + struct wlp_neighbor_e *neighbor, *next; + if (list_empty(&wlp->neighbors)) + return; + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { + __wlp_neighbor_release(neighbor); + } +} + +static +void wlp_neighbors_release(struct wlp *wlp) +{ + mutex_lock(&wlp->nbmutex); + __wlp_neighbors_release(wlp); + mutex_unlock(&wlp->nbmutex); +} + + + +/** + * Send D1 message to neighbor, receive D2 message + * + * @neighbor: neighbor to which D1 message will be sent + * @wss: if not NULL, it is an enrollment request for this WSS + * @wssid: if wss not NULL, this is the wssid of the WSS in which we + * want to enroll + * + * A D1/D2 exchange is done for one of two reasons: discovery or + * enrollment. If done for discovery the D1 message is sent to the neighbor + * and the contents of the D2 response is stored in a temporary cache. + * If done for enrollment the @wss and @wssid are provided also. In this + * case the D1 message is sent to the neighbor, the D2 response is parsed + * for enrollment of the WSS with wssid. + * + * &wss->mutex is held + */ +static +int wlp_d1d2_exchange(struct wlp *wlp, struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct sk_buff *skb; + struct wlp_frame_assoc *resp; + struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; + + mutex_lock(&wlp->mutex); + if (!wlp_uuid_is_set(&wlp->uuid)) { + dev_err(dev, "WLP: UUID is not set. Set via sysfs to " + "proceed.\n"); + result = -ENXIO; + goto out; + } + /* Send D1 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_D1); + if (result < 0) { + dev_err(dev, "Unable to send D1 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + d_printf(6, dev, "Add placeholders into buffer next to " + "neighbor information we have (dev address).\n"); + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_D2; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for D2/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + result = -ETIMEDOUT; + dev_err(dev, "Timeout while sending D1 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto error_session; + } + if (result < 0) { + dev_err(dev, "Unable to discover/enroll neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_session; + } + /* Parse message in session->data: it will be either D2 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(6, dev, "Received response to D1 frame. \n"); + d_dump(6, dev, skb->data, skb->len > 72 ? 72 : skb->len); + + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: Unable to parse F0 from neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + result = -EINVAL; + goto error_resp_parse; + } + if (wss == NULL) { + /* Discovery */ + result = wlp_parse_d2_frame_to_cache(wlp, skb, neighbor); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse D2 message from " + "neighbor %02x:%02x for discovery.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_resp_parse; + } + } else { + /* Enrollment */ + result = wlp_parse_d2_frame_to_enroll(wss, skb, neighbor, + wssid); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse D2 message from " + "neighbor %02x:%02x for enrollment.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_resp_parse; + } + } +error_resp_parse: + kfree_skb(skb); +error_session: + wlp->session = NULL; +out: + mutex_unlock(&wlp->mutex); + return result; +} + +/** + * Enroll into WSS of provided WSSID by using neighbor as registrar + * + * &wss->mutex is held + */ +int wlp_enroll_neighbor(struct wlp *wlp, struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n", + wlp, neighbor, wss, wssid, buf); + d_printf(6, dev, "Complete me.\n"); + result = wlp_d1d2_exchange(wlp, neighbor, wss, wssid); + if (result < 0) { + dev_err(dev, "WLP: D1/D2 message exchange for enrollment " + "failed. result = %d \n", result); + goto out; + } + if (wss->state != WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: Unable to enroll into WSS %s using " + "neighbor %02x:%02x. \n", buf, + dev_addr->data[1], dev_addr->data[0]); + result = -EINVAL; + goto out; + } + if (wss->secure_status == WLP_WSS_SECURE) { + dev_err(dev, "FIXME: need to complete secure enrollment.\n"); + result = -EINVAL; + goto error; + } else { + wss->state = WLP_WSS_STATE_ENROLLED; + d_printf(2, dev, "WLP: Success Enrollment into unsecure WSS " + "%s using neighbor %02x:%02x. \n", buf, + dev_addr->data[1], dev_addr->data[0]); + } + + d_fnend(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n", + wlp, neighbor, wss, wssid, buf); +out: + return result; +error: + wlp_wss_reset(wss); + return result; +} + +/** + * Discover WSS information of neighbor's active WSS + */ +static +int wlp_discover_neighbor(struct wlp *wlp, + struct wlp_neighbor_e *neighbor) +{ + return wlp_d1d2_exchange(wlp, neighbor, NULL, NULL); +} + + +/** + * Each neighbor in the neighborhood cache is discoverable. Discover it. + * + * Discovery is done through sending of D1 association frame and parsing + * the D2 association frame response. Only wssid from D2 will be included + * in neighbor cache, rest is just displayed to user and forgotten. + * + * The discovery is not done in parallel. This is simple and enables us to + * maintain only one association context. + * + * The discovery of one neighbor does not affect the other, but if the + * discovery of a neighbor fails it is removed from the neighborhood cache. + */ +static +int wlp_discover_all_neighbors(struct wlp *wlp) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor, *next; + + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { + result = wlp_discover_neighbor(wlp, neighbor); + if (result < 0) { + dev_err(dev, "WLP: Unable to discover neighbor " + "%02x:%02x, removing from neighborhood. \n", + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + __wlp_neighbor_release(neighbor); + } + } + return result; +} + +static int wlp_add_neighbor_helper(struct device *dev, void *priv) +{ + struct wlp *wlp = priv; + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + return wlp_add_neighbor(wlp, uwb_dev); +} + +/** + * Discover WLP neighborhood + * + * Will send D1 association frame to all devices in beacon group that have + * discoverable bit set in WLP IE. D2 frames will be received, information + * displayed to user in @buf. Partial information (from D2 association + * frame) will be cached to assist with future association + * requests. + * + * The discovery of the WLP neighborhood is triggered by the user. This + * should occur infrequently and we thus free current cache and re-allocate + * memory if needed. + * + * If one neighbor fails during initial discovery (determining if it is a + * neighbor or not), we fail all - note that interaction with neighbor has + * not occured at this point so if a failure occurs we know something went wrong + * locally. We thus undo everything. + */ +ssize_t wlp_discover(struct wlp *wlp) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + + d_fnstart(6, dev, "wlp %p \n", wlp); + mutex_lock(&wlp->nbmutex); + /* Clear current neighborhood cache. */ + __wlp_neighbors_release(wlp); + /* Determine which devices in neighborhood. Repopulate cache. */ + result = uwb_dev_for_each(wlp->rc, wlp_add_neighbor_helper, wlp); + if (result < 0) { + /* May have partial neighbor information, release all. */ + __wlp_neighbors_release(wlp); + goto error_dev_for_each; + } + /* Discover the properties of devices in neighborhood. */ + result = wlp_discover_all_neighbors(wlp); + /* In case of failure we still print our partial results. */ + if (result < 0) { + dev_err(dev, "Unable to fully discover neighborhood. \n"); + result = 0; + } +error_dev_for_each: + mutex_unlock(&wlp->nbmutex); + d_fnend(6, dev, "wlp %p \n", wlp); + return result; +} + +/** + * Handle events from UWB stack + * + * We handle events conservatively. If a neighbor goes off the air we + * remove it from the neighborhood. If an association process is in + * progress this function will block waiting for the nbmutex to become + * free. The association process will thus be allowed to complete before it + * is removed. + */ +static +void wlp_uwb_notifs_cb(void *_wlp, struct uwb_dev *uwb_dev, + enum uwb_notifs event) +{ + struct wlp *wlp = _wlp; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor, *next; + int result; + switch (event) { + case UWB_NOTIF_ONAIR: + d_printf(6, dev, "UWB device %02x:%02x is onair\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + result = wlp_eda_create_node(&wlp->eda, + uwb_dev->mac_addr.data, + &uwb_dev->dev_addr); + if (result < 0) + dev_err(dev, "WLP: Unable to add new neighbor " + "%02x:%02x to EDA cache.\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + break; + case UWB_NOTIF_OFFAIR: + d_printf(6, dev, "UWB device %02x:%02x is offair\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + wlp_eda_rm_node(&wlp->eda, &uwb_dev->dev_addr); + mutex_lock(&wlp->nbmutex); + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, + node) { + if (neighbor->uwb_dev == uwb_dev) { + d_printf(6, dev, "Removing device from " + "neighborhood.\n"); + __wlp_neighbor_release(neighbor); + } + } + mutex_unlock(&wlp->nbmutex); + break; + default: + dev_err(dev, "don't know how to handle event %d from uwb\n", + event); + } +} + +int wlp_setup(struct wlp *wlp, struct uwb_rc *rc) +{ + struct device *dev = &rc->uwb_dev.dev; + int result; + + d_fnstart(6, dev, "wlp %p\n", wlp); + BUG_ON(wlp->fill_device_info == NULL); + BUG_ON(wlp->xmit_frame == NULL); + BUG_ON(wlp->stop_queue == NULL); + BUG_ON(wlp->start_queue == NULL); + wlp->rc = rc; + wlp_eda_init(&wlp->eda);/* Set up address cache */ + wlp->uwb_notifs_handler.cb = wlp_uwb_notifs_cb; + wlp->uwb_notifs_handler.data = wlp; + uwb_notifs_register(rc, &wlp->uwb_notifs_handler); + + uwb_pal_init(&wlp->pal); + result = uwb_pal_register(rc, &wlp->pal); + if (result < 0) + uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); + + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} +EXPORT_SYMBOL_GPL(wlp_setup); + +void wlp_remove(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(6, dev, "wlp %p\n", wlp); + wlp_neighbors_release(wlp); + uwb_pal_unregister(wlp->rc, &wlp->pal); + uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); + wlp_eda_release(&wlp->eda); + mutex_lock(&wlp->mutex); + if (wlp->dev_info != NULL) + kfree(wlp->dev_info); + mutex_unlock(&wlp->mutex); + wlp->rc = NULL; + /* We have to use NULL here because this function can be called + * when the device disappeared. */ + d_fnend(6, NULL, "wlp %p\n", wlp); +} +EXPORT_SYMBOL_GPL(wlp_remove); + +/** + * wlp_reset_all - reset the WLP hardware + * @wlp: the WLP device to reset. + * + * This schedules a full hardware reset of the WLP device. The radio + * controller and any other PALs will also be reset. + */ +void wlp_reset_all(struct wlp *wlp) +{ + uwb_rc_reset_all(wlp->rc); +} +EXPORT_SYMBOL_GPL(wlp_reset_all); diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c new file mode 100644 index 00000000000..96b18c9bd6e --- /dev/null +++ b/drivers/uwb/wlp/wss-lc.c @@ -0,0 +1,1055 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Implementation of the WLP association protocol. + * + * FIXME: Docs + * + * A UWB network interface will configure a WSS through wlp_wss_setup() after + * the interface has been assigned a MAC address, typically after + * "ifconfig" has been called. When the interface goes down it should call + * wlp_wss_remove(). + * + * When the WSS is ready for use the user interacts via sysfs to create, + * discover, and activate WSS. + * + * wlp_wss_enroll_activate() + * + * wlp_wss_create_activate() + * wlp_wss_set_wssid_hash() + * wlp_wss_comp_wssid_hash() + * wlp_wss_sel_bcast_addr() + * wlp_wss_sysfs_add() + * + * Called when no more references to WSS exist: + * wlp_wss_release() + * wlp_wss_reset() + */ + +#include <linux/etherdevice.h> /* for is_valid_ether_addr */ +#include <linux/skbuff.h> +#include <linux/wlp.h> +#define D_LOCAL 5 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +size_t wlp_wss_key_print(char *buf, size_t bufsize, u8 *key) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x", + key[0], key[1], key[2], key[3], + key[4], key[5], key[6], key[7], + key[8], key[9], key[10], key[11], + key[12], key[13], key[14], key[15]); + return result; +} + +/** + * Compute WSSID hash + * WLP Draft 0.99 [7.2.1] + * + * The WSSID hash for a WSSID is the result of an octet-wise exclusive-OR + * of all octets in the WSSID. + */ +static +u8 wlp_wss_comp_wssid_hash(struct wlp_uuid *wssid) +{ + return wssid->data[0] ^ wssid->data[1] ^ wssid->data[2] + ^ wssid->data[3] ^ wssid->data[4] ^ wssid->data[5] + ^ wssid->data[6] ^ wssid->data[7] ^ wssid->data[8] + ^ wssid->data[9] ^ wssid->data[10] ^ wssid->data[11] + ^ wssid->data[12] ^ wssid->data[13] ^ wssid->data[14] + ^ wssid->data[15]; +} + +/** + * Select a multicast EUI-48 for the WSS broadcast address. + * WLP Draft 0.99 [7.2.1] + * + * Selected based on the WiMedia Alliance OUI, 00-13-88, within the WLP + * range, [01-13-88-00-01-00, 01-13-88-00-01-FF] inclusive. + * + * This address is currently hardcoded. + * FIXME? + */ +static +struct uwb_mac_addr wlp_wss_sel_bcast_addr(struct wlp_wss *wss) +{ + struct uwb_mac_addr bcast = { + .data = { 0x01, 0x13, 0x88, 0x00, 0x01, 0x00 } + }; + return bcast; +} + +/** + * Clear the contents of the WSS structure - all except kobj, mutex, virtual + * + * We do not want to reinitialize - the internal kobj should not change as + * it still points to the parent received during setup. The mutex should + * remain also. We thus just reset values individually. + * The virutal address assigned to WSS will remain the same for the + * lifetime of the WSS. We only reset the fields that can change during its + * lifetime. + */ +void wlp_wss_reset(struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(5, dev, "wss (%p) \n", wss); + memset(&wss->wssid, 0, sizeof(wss->wssid)); + wss->hash = 0; + memset(&wss->name[0], 0, sizeof(wss->name)); + memset(&wss->bcast, 0, sizeof(wss->bcast)); + wss->secure_status = WLP_WSS_UNSECURE; + memset(&wss->master_key[0], 0, sizeof(wss->master_key)); + wss->tag = 0; + wss->state = WLP_WSS_STATE_NONE; + d_fnend(5, dev, "wss (%p) \n", wss); +} + +/** + * Create sysfs infrastructure for WSS + * + * The WSS is configured to have the interface as parent (see wlp_wss_setup()) + * a new sysfs directory that includes wssid as its name is created in the + * interface's sysfs directory. The group of files interacting with WSS are + * created also. + */ +static +int wlp_wss_sysfs_add(struct wlp_wss *wss, char *wssid_str) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result; + + d_fnstart(5, dev, "wss (%p), wssid: %s\n", wss, wssid_str); + result = kobject_set_name(&wss->kobj, "wss-%s", wssid_str); + if (result < 0) + return result; + wss->kobj.ktype = &wss_ktype; + result = kobject_init_and_add(&wss->kobj, + &wss_ktype, wss->kobj.parent, "wlp"); + if (result < 0) { + dev_err(dev, "WLP: Cannot register WSS kobject.\n"); + goto error_kobject_register; + } + result = sysfs_create_group(&wss->kobj, &wss_attr_group); + if (result < 0) { + dev_err(dev, "WLP: Cannot register WSS attributes: %d\n", + result); + goto error_sysfs_create_group; + } + d_fnend(5, dev, "Completed. result = %d \n", result); + return 0; +error_sysfs_create_group: + + kobject_put(&wss->kobj); /* will free name if needed */ + return result; +error_kobject_register: + kfree(wss->kobj.name); + wss->kobj.name = NULL; + wss->kobj.ktype = NULL; + return result; +} + + +/** + * Release WSS + * + * No more references exist to this WSS. We should undo everything that was + * done in wlp_wss_create_activate() except removing the group. The group + * is not removed because an object can be unregistered before the group is + * created. We also undo any additional operations on the WSS after this + * (addition of members). + * + * If memory was allocated for the kobject's name then it will + * be freed by the kobject system during this time. + * + * The EDA cache is removed and reinitilized when the WSS is removed. We + * thus loose knowledge of members of this WSS at that time and need not do + * it here. + */ +void wlp_wss_release(struct kobject *kobj) +{ + struct wlp_wss *wss = container_of(kobj, struct wlp_wss, kobj); + + wlp_wss_reset(wss); +} + +/** + * Enroll into a WSS using provided neighbor as registrar + * + * First search the neighborhood information to learn which neighbor is + * referred to, next proceed with enrollment. + * + * &wss->mutex is held + */ +static +int wlp_wss_enroll_target(struct wlp_wss *wss, struct wlp_uuid *wssid, + struct uwb_dev_addr *dest) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor; + char buf[WLP_WSS_UUID_STRSIZE]; + int result = -ENXIO; + struct uwb_dev_addr *dev_addr; + + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(5, dev, "wss %p, wssid %s, registrar %02x:%02x \n", + wss, buf, dest->data[1], dest->data[0]); + mutex_lock(&wlp->nbmutex); + list_for_each_entry(neighbor, &wlp->neighbors, node) { + dev_addr = &neighbor->uwb_dev->dev_addr; + if (!memcmp(dest, dev_addr, sizeof(*dest))) { + d_printf(5, dev, "Neighbor %02x:%02x is valid, " + "enrolling. \n", + dev_addr->data[1], dev_addr->data[0]); + result = wlp_enroll_neighbor(wlp, neighbor, wss, + wssid); + break; + } + } + if (result == -ENXIO) + dev_err(dev, "WLP: Cannot find neighbor %02x:%02x. \n", + dest->data[1], dest->data[0]); + mutex_unlock(&wlp->nbmutex); + d_fnend(5, dev, "wss %p, wssid %s, registrar %02x:%02x, result %d \n", + wss, buf, dest->data[1], dest->data[0], result); + return result; +} + +/** + * Enroll into a WSS previously discovered + * + * User provides WSSID of WSS, search for neighbor that has this WSS + * activated and attempt to enroll. + * + * &wss->mutex is held + */ +static +int wlp_wss_enroll_discovered(struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor; + struct wlp_wssid_e *wssid_e; + char buf[WLP_WSS_UUID_STRSIZE]; + int result = -ENXIO; + + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(5, dev, "wss %p, wssid %s \n", wss, buf); + mutex_lock(&wlp->nbmutex); + list_for_each_entry(neighbor, &wlp->neighbors, node) { + list_for_each_entry(wssid_e, &neighbor->wssid, node) { + if (!memcmp(wssid, &wssid_e->wssid, sizeof(*wssid))) { + d_printf(5, dev, "Found WSSID %s in neighbor " + "%02x:%02x cache. \n", buf, + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + result = wlp_enroll_neighbor(wlp, neighbor, + wss, wssid); + if (result == 0) /* enrollment success */ + goto out; + break; + } + } + } +out: + if (result == -ENXIO) + dev_err(dev, "WLP: Cannot find WSSID %s in cache. \n", buf); + mutex_unlock(&wlp->nbmutex); + d_fnend(5, dev, "wss %p, wssid %s, result %d \n", wss, buf, result); + return result; +} + +/** + * Enroll into WSS with provided WSSID, registrar may be provided + * + * @wss: out WSS that will be enrolled + * @wssid: wssid of neighboring WSS that we want to enroll in + * @devaddr: registrar can be specified, will be broadcast (ff:ff) if any + * neighbor can be used as registrar. + * + * &wss->mutex is held + */ +static +int wlp_wss_enroll(struct wlp_wss *wss, struct wlp_uuid *wssid, + struct uwb_dev_addr *devaddr) +{ + int result; + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct uwb_dev_addr bcast = {.data = {0xff, 0xff} }; + + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + if (wss->state != WLP_WSS_STATE_NONE) { + dev_err(dev, "WLP: Already enrolled in WSS %s.\n", buf); + result = -EEXIST; + goto error; + } + if (!memcmp(&bcast, devaddr, sizeof(bcast))) { + d_printf(5, dev, "Request to enroll in discovered WSS " + "with WSSID %s \n", buf); + result = wlp_wss_enroll_discovered(wss, wssid); + } else { + d_printf(5, dev, "Request to enroll in WSSID %s with " + "registrar %02x:%02x\n", buf, devaddr->data[1], + devaddr->data[0]); + result = wlp_wss_enroll_target(wss, wssid, devaddr); + } + if (result < 0) { + dev_err(dev, "WLP: Unable to enroll into WSS %s, result %d \n", + buf, result); + goto error; + } + d_printf(2, dev, "Successfully enrolled into WSS %s \n", buf); + result = wlp_wss_sysfs_add(wss, buf); + if (result < 0) { + dev_err(dev, "WLP: Unable to set up sysfs for WSS kobject.\n"); + wlp_wss_reset(wss); + } +error: + return result; + +} + +/** + * Activate given WSS + * + * Prior to activation a WSS must be enrolled. To activate a WSS a device + * includes the WSS hash in the WLP IE in its beacon in each superframe. + * WLP 0.99 [7.2.5]. + * + * The WSS tag is also computed at this time. We only support one activated + * WSS so we can use the hash as a tag - there will never be a conflict. + * + * We currently only support one activated WSS so only one WSS hash is + * included in the WLP IE. + */ +static +int wlp_wss_activate(struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct uwb_rc *uwb_rc = wlp->rc; + int result; + struct { + struct wlp_ie wlp_ie; + u8 hash; /* only include one hash */ + } ie_data; + + d_fnstart(5, dev, "Activating WSS %p. \n", wss); + BUG_ON(wss->state != WLP_WSS_STATE_ENROLLED); + wss->hash = wlp_wss_comp_wssid_hash(&wss->wssid); + wss->tag = wss->hash; + memset(&ie_data, 0, sizeof(ie_data)); + ie_data.wlp_ie.hdr.element_id = UWB_IE_WLP; + ie_data.wlp_ie.hdr.length = sizeof(ie_data) - sizeof(struct uwb_ie_hdr); + wlp_ie_set_hash_length(&ie_data.wlp_ie, sizeof(ie_data.hash)); + ie_data.hash = wss->hash; + result = uwb_rc_ie_add(uwb_rc, &ie_data.wlp_ie.hdr, + sizeof(ie_data)); + if (result < 0) { + dev_err(dev, "WLP: Unable to add WLP IE to beacon. " + "result = %d.\n", result); + goto error_wlp_ie; + } + wss->state = WLP_WSS_STATE_ACTIVE; + result = 0; +error_wlp_ie: + d_fnend(5, dev, "Activating WSS %p, result = %d \n", wss, result); + return result; +} + +/** + * Enroll in and activate WSS identified by provided WSSID + * + * The neighborhood cache should contain a list of all neighbors and the + * WSS they have activated. Based on that cache we search which neighbor we + * can perform the association process with. The user also has option to + * specify which neighbor it prefers as registrar. + * Successful enrollment is followed by activation. + * Successful activation will create the sysfs directory containing + * specific information regarding this WSS. + */ +int wlp_wss_enroll_activate(struct wlp_wss *wss, struct wlp_uuid *wssid, + struct uwb_dev_addr *devaddr) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + char buf[WLP_WSS_UUID_STRSIZE]; + + d_fnstart(5, dev, "Enrollment and activation requested. \n"); + mutex_lock(&wss->mutex); + result = wlp_wss_enroll(wss, wssid, devaddr); + if (result < 0) { + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + dev_err(dev, "WLP: Enrollment into WSS %s failed.\n", buf); + goto error_enroll; + } + result = wlp_wss_activate(wss); + if (result < 0) { + dev_err(dev, "WLP: Unable to activate WSS. Undoing enrollment " + "result = %d \n", result); + /* Undo enrollment */ + wlp_wss_reset(wss); + goto error_activate; + } +error_activate: +error_enroll: + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "Completed. result = %d \n", result); + return result; +} + +/** + * Create, enroll, and activate a new WSS + * + * @wssid: new wssid provided by user + * @name: WSS name requested by used. + * @sec_status: security status requested by user + * + * A user requested the creation of a new WSS. All operations are done + * locally. The new WSS will be stored locally, the hash will be included + * in the WLP IE, and the sysfs infrastructure for this WSS will be + * created. + */ +int wlp_wss_create_activate(struct wlp_wss *wss, struct wlp_uuid *wssid, + char *name, unsigned sec_status, unsigned accept) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + char buf[WLP_WSS_UUID_STRSIZE]; + d_fnstart(5, dev, "Request to create new WSS.\n"); + result = wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_printf(5, dev, "Request to create WSS: WSSID=%s, name=%s, " + "sec_status=%u, accepting enrollment=%u \n", + buf, name, sec_status, accept); + if (!mutex_trylock(&wss->mutex)) { + dev_err(dev, "WLP: WLP association session in progress.\n"); + return -EBUSY; + } + if (wss->state != WLP_WSS_STATE_NONE) { + dev_err(dev, "WLP: WSS already exists. Not creating new.\n"); + result = -EEXIST; + goto out; + } + if (wss->kobj.parent == NULL) { + dev_err(dev, "WLP: WSS parent not ready. Is network interface " + "up?\n"); + result = -ENXIO; + goto out; + } + if (sec_status == WLP_WSS_SECURE) { + dev_err(dev, "WLP: FIXME Creation of secure WSS not " + "supported yet.\n"); + result = -EINVAL; + goto out; + } + wss->wssid = *wssid; + memcpy(wss->name, name, sizeof(wss->name)); + wss->bcast = wlp_wss_sel_bcast_addr(wss); + wss->secure_status = sec_status; + wss->accept_enroll = accept; + /*wss->virtual_addr is initialized in call to wlp_wss_setup*/ + /* sysfs infrastructure */ + result = wlp_wss_sysfs_add(wss, buf); + if (result < 0) { + dev_err(dev, "Cannot set up sysfs for WSS kobject.\n"); + wlp_wss_reset(wss); + goto out; + } else + result = 0; + wss->state = WLP_WSS_STATE_ENROLLED; + result = wlp_wss_activate(wss); + if (result < 0) { + dev_err(dev, "WLP: Unable to activate WSS. Undoing " + "enrollment\n"); + wlp_wss_reset(wss); + goto out; + } + result = 0; +out: + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "Completed. result = %d \n", result); + return result; +} + +/** + * Determine if neighbor has WSS activated + * + * @returns: 1 if neighbor has WSS activated, zero otherwise + * + * This can be done in two ways: + * - send a C1 frame, parse C2/F0 response + * - examine the WLP IE sent by the neighbor + * + * The WLP IE is not fully supported in hardware so we use the C1/C2 frame + * exchange to determine if a WSS is activated. Using the WLP IE should be + * faster and should be used when it becomes possible. + */ +int wlp_wss_is_active(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct sk_buff *skb; + struct wlp_frame_assoc *resp; + struct wlp_uuid wssid; + + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + mutex_lock(&wlp->mutex); + /* Send C1 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C1); + if (result < 0) { + dev_err(dev, "Unable to send C1 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + result = 0; + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_C2; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for C2/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + dev_err(dev, "Timeout while sending C1 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto out; + } + if (result < 0) { + dev_err(dev, "Unable to send C1 to neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + result = 0; + goto out; + } + /* Parse message in session->data: it will be either C2 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(5, dev, "Received response to C1 frame. \n"); + d_dump(5, dev, skb->data, skb->len > 72 ? 72 : skb->len); + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: unable to parse incoming F0 " + "frame from neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + result = 0; + goto error_resp_parse; + } + /* WLP version and message type fields have already been parsed */ + result = wlp_get_wssid(wlp, (void *)resp + sizeof(*resp), &wssid, + skb->len - sizeof(*resp)); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID from C2 frame.\n"); + result = 0; + goto error_resp_parse; + } + if (!memcmp(&wssid, &wss->wssid, sizeof(wssid))) { + d_printf(5, dev, "WSSID in C2 frame matches local " + "active WSS.\n"); + result = 1; + } else { + dev_err(dev, "WLP: Received a C2 frame without matching " + "WSSID.\n"); + result = 0; + } +error_resp_parse: + kfree_skb(skb); +out: + wlp->session = NULL; + mutex_unlock(&wlp->mutex); + d_fnend(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + return result; +} + +/** + * Activate connection with neighbor by updating EDA cache + * + * @wss: local WSS to which neighbor wants to connect + * @dev_addr: neighbor's address + * @wssid: neighbor's WSSID - must be same as our WSS's WSSID + * @tag: neighbor's WSS tag used to identify frames transmitted by it + * @virt_addr: neighbor's virtual EUI-48 + */ +static +int wlp_wss_activate_connection(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr, + struct wlp_uuid *wssid, u8 *tag, + struct uwb_mac_addr *virt_addr) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + char buf[WLP_WSS_UUID_STRSIZE]; + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(5, dev, "wlp %p, wss %p, wssid %s, tag %u, virtual " + "%02x:%02x:%02x:%02x:%02x:%02x \n", wlp, wss, buf, *tag, + virt_addr->data[0], virt_addr->data[1], virt_addr->data[2], + virt_addr->data[3], virt_addr->data[4], virt_addr->data[5]); + + if (!memcmp(wssid, &wss->wssid, sizeof(*wssid))) { + d_printf(5, dev, "WSSID from neighbor frame matches local " + "active WSS.\n"); + /* Update EDA cache */ + result = wlp_eda_update_node(&wlp->eda, dev_addr, wss, + (void *) virt_addr->data, *tag, + WLP_WSS_CONNECTED); + if (result < 0) + dev_err(dev, "WLP: Unable to update EDA cache " + "with new connected neighbor information.\n"); + } else { + dev_err(dev, "WLP: Neighbor does not have matching " + "WSSID.\n"); + result = -EINVAL; + } + + d_fnend(5, dev, "wlp %p, wss %p, wssid %s, tag %u, virtual " + "%02x:%02x:%02x:%02x:%02x:%02x, result = %d \n", + wlp, wss, buf, *tag, + virt_addr->data[0], virt_addr->data[1], virt_addr->data[2], + virt_addr->data[3], virt_addr->data[4], virt_addr->data[5], + result); + + return result; +} + +/** + * Connect to WSS neighbor + * + * Use C3/C4 exchange to determine if neighbor has WSS activated and + * retrieve the WSS tag and virtual EUI-48 of the neighbor. + */ +static +int wlp_wss_connect_neighbor(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct wlp_uuid wssid; + u8 tag; + struct uwb_mac_addr virt_addr; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct wlp_frame_assoc *resp; + struct sk_buff *skb; + + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + mutex_lock(&wlp->mutex); + /* Send C3 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C3); + if (result < 0) { + dev_err(dev, "Unable to send C3 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_C4; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for C4/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + dev_err(dev, "Timeout while sending C3 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + result = -ETIMEDOUT; + goto out; + } + if (result < 0) { + dev_err(dev, "Unable to send C3 to neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + goto out; + } + /* Parse message in session->data: it will be either C4 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(5, dev, "Received response to C3 frame. \n"); + d_dump(5, dev, skb->data, skb->len > 72 ? 72 : skb->len); + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: unable to parse incoming F0 " + "frame from neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + result = -EINVAL; + goto error_resp_parse; + } + result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse C4 frame from neighbor.\n"); + goto error_resp_parse; + } + result = wlp_wss_activate_connection(wlp, wss, dev_addr, &wssid, &tag, + &virt_addr); + if (result < 0) { + dev_err(dev, "WLP: Unable to activate connection to " + "neighbor %02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto error_resp_parse; + } +error_resp_parse: + kfree_skb(skb); +out: + /* Record that we unsuccessfully tried to connect to this neighbor */ + if (result < 0) + wlp_eda_update_node_state(&wlp->eda, dev_addr, + WLP_WSS_CONNECT_FAILED); + wlp->session = NULL; + mutex_unlock(&wlp->mutex); + d_fnend(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + return result; +} + +/** + * Connect to neighbor with common WSS, send pending frame + * + * This function is scheduled when a frame is destined to a neighbor with + * which we do not have a connection. A copy of the EDA cache entry is + * provided - not the actual cache entry (because it is protected by a + * spinlock). + * + * First determine if neighbor has the same WSS activated, connect if it + * does. The C3/C4 exchange is dual purpose to determine if neighbor has + * WSS activated and proceed with the connection. + * + * The frame that triggered the connection setup is sent after connection + * setup. + * + * network queue is stopped - we need to restart when done + * + */ +static +void wlp_wss_connect_send(struct work_struct *ws) +{ + struct wlp_assoc_conn_ctx *conn_ctx = container_of(ws, + struct wlp_assoc_conn_ctx, + ws); + struct wlp *wlp = conn_ctx->wlp; + struct sk_buff *skb = conn_ctx->skb; + struct wlp_eda_node *eda_entry = &conn_ctx->eda_entry; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + struct wlp_wss *wss = &wlp->wss; + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + + mutex_lock(&wss->mutex); + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + if (wss->state < WLP_WSS_STATE_ACTIVE) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Attempting to connect with " + "WSS that is not active or connected.\n"); + dev_kfree_skb(skb); + goto out; + } + /* Establish connection - send C3 rcv C4 */ + result = wlp_wss_connect_neighbor(wlp, wss, dev_addr); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to establish connection " + "with neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + dev_kfree_skb(skb); + goto out; + } + /* EDA entry changed, update the local copy being used */ + result = wlp_copy_eda_node(&wlp->eda, dev_addr, eda_entry); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Cannot find EDA entry for " + "neighbor %02x:%02x \n", + dev_addr->data[1], dev_addr->data[0]); + } + result = wlp_wss_prep_hdr(wlp, eda_entry, skb); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to prepare frame header for " + "transmission (neighbor %02x:%02x). \n", + dev_addr->data[1], dev_addr->data[0]); + dev_kfree_skb(skb); + goto out; + } + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, skb, dev_addr); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to transmit frame: %d\n", + result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb(skb);/*we need to free if tx fails */ + } +out: + kfree(conn_ctx); + BUG_ON(wlp->start_queue == NULL); + wlp->start_queue(wlp); + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "wlp %p, wss %p (wssid %s)\n", wlp, wss, buf); +} + +/** + * Add WLP header to outgoing skb + * + * @eda_entry: pointer to neighbor's entry in the EDA cache + * @_skb: skb containing data destined to the neighbor + */ +int wlp_wss_prep_hdr(struct wlp *wlp, struct wlp_eda_node *eda_entry, + void *_skb) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + unsigned char *eth_addr = eda_entry->eth_addr; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + struct sk_buff *skb = _skb; + struct wlp_frame_std_abbrv_hdr *std_hdr; + + d_fnstart(6, dev, "wlp %p \n", wlp); + if (eda_entry->state == WLP_WSS_CONNECTED) { + /* Add WLP header */ + BUG_ON(skb_headroom(skb) < sizeof(*std_hdr)); + std_hdr = (void *) __skb_push(skb, sizeof(*std_hdr)); + std_hdr->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + std_hdr->hdr.type = WLP_FRAME_STANDARD; + std_hdr->tag = eda_entry->wss->tag; + } else { + if (printk_ratelimit()) + dev_err(dev, "WLP: Destination neighbor (Ethernet: " + "%02x:%02x:%02x:%02x:%02x:%02x, Dev: " + "%02x:%02x) is not connected. \n", eth_addr[0], + eth_addr[1], eth_addr[2], eth_addr[3], + eth_addr[4], eth_addr[5], dev_addr->data[1], + dev_addr->data[0]); + result = -EINVAL; + } + d_fnend(6, dev, "wlp %p \n", wlp); + return result; +} + + +/** + * Prepare skb for neighbor: connect if not already and prep WLP header + * + * This function is called in interrupt context, but it needs to sleep. We + * temporarily stop the net queue to establish the WLP connection. + * Setup of the WLP connection and restart of queue is scheduled + * on the default work queue. + * + * run with eda->lock held (spinlock) + */ +int wlp_wss_connect_prep(struct wlp *wlp, struct wlp_eda_node *eda_entry, + void *_skb) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + unsigned char *eth_addr = eda_entry->eth_addr; + struct sk_buff *skb = _skb; + struct wlp_assoc_conn_ctx *conn_ctx; + + d_fnstart(5, dev, "wlp %p\n", wlp); + d_printf(5, dev, "To neighbor %02x:%02x with eth " + "%02x:%02x:%02x:%02x:%02x:%02x\n", dev_addr->data[1], + dev_addr->data[0], eth_addr[0], eth_addr[1], eth_addr[2], + eth_addr[3], eth_addr[4], eth_addr[5]); + if (eda_entry->state == WLP_WSS_UNCONNECTED) { + /* We don't want any more packets while we set up connection */ + BUG_ON(wlp->stop_queue == NULL); + wlp->stop_queue(wlp); + conn_ctx = kmalloc(sizeof(*conn_ctx), GFP_ATOMIC); + if (conn_ctx == NULL) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to allocate memory " + "for connection handling.\n"); + result = -ENOMEM; + goto out; + } + conn_ctx->wlp = wlp; + conn_ctx->skb = skb; + conn_ctx->eda_entry = *eda_entry; + INIT_WORK(&conn_ctx->ws, wlp_wss_connect_send); + schedule_work(&conn_ctx->ws); + result = 1; + } else if (eda_entry->state == WLP_WSS_CONNECT_FAILED) { + /* Previous connection attempts failed, don't retry - see + * conditions for connection in WLP 0.99 [7.6.2] */ + if (printk_ratelimit()) + dev_err(dev, "Could not connect to neighbor " + "previously. Not retrying. \n"); + result = -ENONET; + goto out; + } else { /* eda_entry->state == WLP_WSS_CONNECTED */ + d_printf(5, dev, "Neighbor is connected, preparing frame.\n"); + result = wlp_wss_prep_hdr(wlp, eda_entry, skb); + } +out: + d_fnend(5, dev, "wlp %p, result = %d \n", wlp, result); + return result; +} + +/** + * Emulate broadcast: copy skb, send copy to neighbor (connect if not already) + * + * We need to copy skbs in the case where we emulate broadcast through + * unicast. We copy instead of clone because we are modifying the data of + * the frame after copying ... clones share data so we cannot emulate + * broadcast using clones. + * + * run with eda->lock held (spinlock) + */ +int wlp_wss_send_copy(struct wlp *wlp, struct wlp_eda_node *eda_entry, + void *_skb) +{ + int result = -ENOMEM; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct sk_buff *skb = _skb; + struct sk_buff *copy; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + + d_fnstart(5, dev, "to neighbor %02x:%02x, skb (%p) \n", + dev_addr->data[1], dev_addr->data[0], skb); + copy = skb_copy(skb, GFP_ATOMIC); + if (copy == NULL) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to copy skb for " + "transmission.\n"); + goto out; + } + result = wlp_wss_connect_prep(wlp, eda_entry, copy); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to connect/send skb " + "to neighbor.\n"); + dev_kfree_skb_irq(copy); + goto out; + } else if (result == 1) + /* Frame will be transmitted separately */ + goto out; + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, copy, dev_addr); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to transmit frame: %d\n", + result); + if ((result == -ENXIO) && printk_ratelimit()) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_irq(copy);/*we need to free if tx fails */ + } +out: + d_fnend(5, dev, "to neighbor %02x:%02x \n", dev_addr->data[1], + dev_addr->data[0]); + return result; +} + + +/** + * Setup WSS + * + * Should be called by network driver after the interface has been given a + * MAC address. + */ +int wlp_wss_setup(struct net_device *net_dev, struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + d_fnstart(5, dev, "wss (%p) \n", wss); + mutex_lock(&wss->mutex); + wss->kobj.parent = &net_dev->dev.kobj; + if (!is_valid_ether_addr(net_dev->dev_addr)) { + dev_err(dev, "WLP: Invalid MAC address. Cannot use for" + "virtual.\n"); + result = -EINVAL; + goto out; + } + memcpy(wss->virtual_addr.data, net_dev->dev_addr, + sizeof(wss->virtual_addr.data)); +out: + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "wss (%p) \n", wss); + return result; +} +EXPORT_SYMBOL_GPL(wlp_wss_setup); + +/** + * Remove WSS + * + * Called by client that configured WSS through wlp_wss_setup(). This + * function is called when client no longer needs WSS, eg. client shuts + * down. + * + * We remove the WLP IE from the beacon before initiating local cleanup. + */ +void wlp_wss_remove(struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(5, dev, "wss (%p) \n", wss); + mutex_lock(&wss->mutex); + if (wss->state == WLP_WSS_STATE_ACTIVE) + uwb_rc_ie_rm(wlp->rc, UWB_IE_WLP); + if (wss->state != WLP_WSS_STATE_NONE) { + sysfs_remove_group(&wss->kobj, &wss_attr_group); + kobject_put(&wss->kobj); + } + wss->kobj.parent = NULL; + memset(&wss->virtual_addr, 0, sizeof(wss->virtual_addr)); + /* Cleanup EDA cache */ + wlp_eda_release(&wlp->eda); + wlp_eda_init(&wlp->eda); + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "wss (%p) \n", wss); +} +EXPORT_SYMBOL_GPL(wlp_wss_remove); |