diff options
Diffstat (limited to 'drivers/video/Kconfig')
| -rw-r--r-- | drivers/video/Kconfig | 127 |
1 files changed, 116 insertions, 11 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 344c3759530..1132ba5ff39 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -5,6 +5,11 @@ menu "Graphics support" source "drivers/video/backlight/Kconfig" +source "drivers/video/display/Kconfig" + +config VGASTATE + tristate + default n config FB tristate "Support for frame buffer devices" @@ -90,6 +95,43 @@ config FB_CFB_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version. +config FB_SYS_FILLRECT + tristate + depends on FB + default n + ---help--- + Include the sys_fillrect function for generic software rectangle + filling. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_COPYAREA + tristate + depends on FB + default n + ---help--- + Include the sys_copyarea function for generic software area copying. + This is used by drivers that don't provide their own (accelerated) + version and the framebuffer is in system RAM. + +config FB_SYS_IMAGEBLIT + tristate + depends on FB + default n + ---help--- + Include the sys_imageblit function for generic software image + blitting. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_FOPS + tristate + depends on FB + default n + +config FB_DEFERRED_IO + bool + depends on FB + default y + config FB_SVGALIB tristate depends on FB @@ -375,9 +417,10 @@ config FB_FM2 config FB_ARC tristate "Arc Monochrome LCD board support" depends on FB && X86 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix @@ -475,6 +518,8 @@ config FB_VGA16 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -519,15 +564,25 @@ config FB_HP300 default y config FB_TGA - tristate "TGA framebuffer support" - depends on FB && ALPHA + tristate "TGA/SFB+ framebuffer support" + depends on FB && (ALPHA || TC) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE - help - This is the frame buffer device driver for generic TGA graphic - cards. Say Y if you have one of those. + ---help--- + This is the frame buffer device driver for generic TGA and SFB+ + graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, + also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 + TURBOchannel cards, also known as PMAGD-A, -B and -C. + + Due to hardware limitations ZLX-E2 and E3 cards are not supported + for DECstation 5000/200 systems. Additionally due to firmware + limitations these cards may cause troubles with booting DECstation + 5000/240 and /260 systems, but are fully supported under Linux if + you manage to get it going. ;-) + + Say Y if you have one of those. config FB_VESA bool "VESA VGA graphics support" @@ -551,6 +606,21 @@ config FB_IMAC help This is the frame buffer device driver for the Intel-based Macintosh +config FB_HECUBA + tristate "Hecuba board support" + depends on FB && X86 && MMU + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_DEFERRED_IO + help + This enables support for the Hecuba board. This driver was tested + with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO + interface (8 bit data, 4 bit control). If you anticpate using + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. + config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86 @@ -686,6 +756,7 @@ config FB_NVIDIA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -724,6 +795,7 @@ config FB_RIVA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -770,6 +842,7 @@ config FB_I810 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -809,6 +882,22 @@ config FB_I810_I2C select FB_DDC help +config FB_LE80578 + tristate "Intel LE80578 (Vermilion) support" + depends on FB && PCI && X86 + select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This driver supports the LE80578 (Vermilion Range) chipset + +config FB_CARILLO_RANCH + tristate "Intel Carillo Ranch support" + depends on FB_LE80578 && FB && PCI && X86 + help + This driver supports the LE80578 (Carillo Ranch) board + config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" depends on FB && EXPERIMENTAL && PCI && X86 @@ -1120,6 +1209,8 @@ config FB_S3 select FB_CFB_IMAGEBLIT select FB_TILEBLITTING select FB_SVGALIB + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE ---help--- Driver for graphics boards with S3 Trio / S3 Virge chip. @@ -1130,6 +1221,7 @@ config FB_SAVAGE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1196,6 +1288,7 @@ config FB_NEOMAGIC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1662,13 +1755,25 @@ config FB_PS3_DEFAULT_SIZE_M The default value can be overridden on the kernel command line using the "ps3fb" option (e.g. "ps3fb=9M"); -config FB_VIRTUAL - tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" - depends on FB +config FB_XILINX + tristate "Xilinx frame buffer support" + depends on FB && XILINX_VIRTEX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- + Include support for the Xilinx ML300/ML403 reference design + framebuffer. ML300 carries a 640*480 LCD display on the board, + ML403 uses a standard DB15 VGA connector. + +config FB_VIRTUAL + tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" + depends on FB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics board. This means you cannot see any output sent to this frame |