diff options
Diffstat (limited to 'drivers/video/Kconfig')
| -rw-r--r-- | drivers/video/Kconfig | 97 |
1 files changed, 52 insertions, 45 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index fb19803060c..ffe2f2796e2 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -397,7 +397,7 @@ config FB_SA1100 config FB_IMX tristate "Motorola i.MX LCD support" - depends on FB && ARM && ARCH_IMX + depends on FB && (ARCH_IMX || ARCH_MX2) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1597,32 +1597,8 @@ config FB_VT8623 Driver for CastleRock integrated graphics core in the VIA VT8623 [Apollo CLE266] chipset. -config FB_CYBLA - tristate "Cyberblade/i1 support" - depends on FB && PCI && X86_32 && !64BIT - select FB_CFB_IMAGEBLIT - ---help--- - This driver is supposed to support the Trident Cyberblade/i1 - graphics core integrated in the VIA VT8601A North Bridge, - also known as VIA Apollo PLE133. - - Status: - - Developed, tested and working on EPIA 5000 and EPIA 800. - - Does work reliable on all systems with CRT/LCD connected to - normal VGA ports. - - Should work on systems that do use the internal LCD port, but - this is absolutely not tested. - - Character imageblit, copyarea and rectangle fill are hw accelerated, - ypan scrolling is used by default. - - Please do read <file:Documentation/fb/cyblafb/*>. - - To compile this driver as a module, choose M here: the - module will be called cyblafb. - config FB_TRIDENT - tristate "Trident support" + tristate "Trident/CyberXXX/CyberBlade support" depends on FB && PCI select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1633,21 +1609,14 @@ config FB_TRIDENT and Blade XP. There are also integrated versions of these chips called CyberXXXX, CyberImage or CyberBlade. These chips are mostly found in laptops - but also on some motherboards. For more information, read - <file:Documentation/fb/tridentfb.txt> + but also on some motherboards including early VIA EPIA motherboards. + For more information, read <file:Documentation/fb/tridentfb.txt> Say Y if you have such a graphics board. To compile this driver as a module, choose M here: the module will be called tridentfb. -config FB_TRIDENT_ACCEL - bool "Trident Acceleration functions (EXPERIMENTAL)" - depends on FB_TRIDENT && EXPERIMENTAL - ---help--- - This will compile the Trident frame buffer device with - acceleration functions. - config FB_ARK tristate "ARK 2000PV support" depends on FB && PCI @@ -1920,6 +1889,30 @@ config FB_TMIO_ACCELL depends on FB_TMIO default y +config FB_S3C + tristate "Samsung S3C framebuffer support" + depends on FB && ARCH_S3C64XX + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the built-in FB controller in the Samsung + SoC line from the S3C2443 onwards, including the S3C2416, S3C2450, + and the S3C64XX series such as the S3C6400 and S3C6410. + + These chips all have the same basic framebuffer design with the + actual capabilities depending on the chip. For instance the S3C6400 + and S3C6410 support 4 hardware windows whereas the S3C24XX series + currently only have two. + + Currently the support is only for the S3C6400 and S3C6410 SoCs. + +config FB_S3C_DEBUG_REGWRITE + bool "Debug register writes" + depends on FB_S3C + ---help--- + Show all register writes via printk(KERN_DEBUG) + config FB_S3C2410 tristate "S3C2410 LCD framebuffer support" depends on FB && ARCH_S3C2410 @@ -2120,16 +2113,30 @@ config FB_PRE_INIT_FB the bootloader. config FB_MX3 - tristate "MX3 Framebuffer support" - depends on FB && MX3_IPU - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - default y - help - This is a framebuffer device for the i.MX31 LCD Controller. So - far only synchronous displays are supported. If you plan to use - an LCD display with your i.MX31 system, say Y here. + tristate "MX3 Framebuffer support" + depends on FB && MX3_IPU + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + default y + help + This is a framebuffer device for the i.MX31 LCD Controller. So + far only synchronous displays are supported. If you plan to use + an LCD display with your i.MX31 system, say Y here. + +config FB_BROADSHEET + tristate "E-Ink Broadsheet/Epson S1D13521 controller support" + depends on FB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_DEFERRED_IO + help + This driver implements support for the E-Ink Broadsheet + controller. The release name for this device was Epson S1D13521 + and could also have been called by other names when coupled with + a bridge adapter. source "drivers/video/omap/Kconfig" |