summaryrefslogtreecommitdiffstats
path: root/drivers/video/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/Kconfig')
-rw-r--r--drivers/video/Kconfig142
1 files changed, 92 insertions, 50 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 70d135e0cc4..0f13448c6f7 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -76,6 +76,14 @@ config FB_DDC
select I2C
default n
+config FB_BOOT_VESA_SUPPORT
+ bool
+ depends on FB
+ default n
+ ---help---
+ If true, at least one selected framebuffer driver can take advantage
+ of VESA video modes set at an early boot stage via the vga= parameter.
+
config FB_CFB_FILLRECT
tristate
depends on FB
@@ -172,11 +180,6 @@ config FB_DEFERRED_IO
bool
depends on FB
-config FB_METRONOME
- tristate
- depends on FB
- depends on FB_DEFERRED_IO
-
config FB_HECUBA
tristate
depends on FB
@@ -259,16 +262,24 @@ config FB_PM2
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
- This is the frame buffer device driver for the Permedia2 AGP frame
- buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
- product page at
- <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
+ This is the frame buffer device driver for cards based on
+ the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+ The driver was tested on the following cards:
+ Diamond FireGL 1000 PRO AGP
+ ELSA Gloria Synergy PCI
+ Appian Jeronimo PRO (both heads) PCI
+ 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+ Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+ ASK Graphic Blaster Exxtreme AGP
+
+ To compile this driver as a module, choose M here: the
+ module will be called pm2fb.
config FB_PM2_FIFO_DISCONNECT
bool "enable FIFO disconnect feature"
depends on FB_PM2 && PCI
help
- Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
+ Support the Permedia2 FIFO disconnect feature.
config FB_ARMCLCD
tristate "ARM PrimeCell PL110 support"
@@ -678,7 +689,7 @@ config FB_VESA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select VIDEO_SELECT
+ select FB_BOOT_VESA_SUPPORT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -687,23 +698,14 @@ config FB_VESA
config FB_EFI
bool "EFI-based Framebuffer Support"
- depends on (FB = y) && X86
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the EFI frame buffer device driver. If the firmware on
- your platform is UEFI2.0, select Y to add support for
- Graphics Output Protocol for early console messages to appear.
-
-config FB_IMAC
- bool "Intel-based Macintosh Framebuffer Support"
depends on (FB = y) && X86 && EFI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
- This is the frame buffer device driver for the Intel-based Macintosh
+ This is the EFI frame buffer device driver. If the firmware on
+ your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
+ using the EFI framebuffer as your console.
config FB_N411
tristate "N411 Apollo/Hecuba devkit support"
@@ -1124,6 +1126,7 @@ config FB_INTEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BOOT_VESA_SUPPORT
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
@@ -1476,6 +1479,7 @@ config FB_SIS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BOOT_VESA_SUPPORT
help
This is the frame buffer device driver for the SiS 300, 315, 330
and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
@@ -1498,6 +1502,24 @@ config FB_SIS_315
(315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
as XGI V3XT, V5, V8 and Z7.
+config FB_VIA
+ tristate "VIA UniChrome (Pro) and Chrome9 display support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select I2C_ALGOBIT
+ select I2C
+ help
+ This is the frame buffer device driver for Graphics chips of VIA
+ UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
+ CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
+ /P4M900,VX800)
+ Say Y if you have a VIA UniChrome graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called viafb.
config FB_NEOMAGIC
tristate "NeoMagic display support"
depends on FB && PCI
@@ -1527,25 +1549,25 @@ config FB_KYRO
module will be called kyrofb.
config FB_3DFX
- tristate "3Dfx Banshee/Voodoo3 display support"
+ tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
depends on FB && PCI
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
help
- This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
- chips. Say Y if you have such a graphics board.
+ This driver supports graphics boards with the 3Dfx Banshee,
+ Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+ such a graphics board.
To compile this driver as a module, choose M here: the
module will be called tdfxfb.
config FB_3DFX_ACCEL
- bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
+ bool "3Dfx Acceleration functions (EXPERIMENTAL)"
depends on FB_3DFX && EXPERIMENTAL
---help---
- This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
- with acceleration functions.
-
+ This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+ device driver with acceleration functions.
config FB_VOODOO1
tristate "3Dfx Voodoo Graphics (sst1) support"
@@ -1583,7 +1605,6 @@ config FB_CYBLA
tristate "Cyberblade/i1 support"
depends on FB && PCI && X86_32 && !64BIT
select FB_CFB_IMAGEBLIT
- select VIDEO_SELECT
---help---
This driver is supposed to support the Trident Cyberblade/i1
graphics core integrated in the VIA VT8601A North Bridge,
@@ -1611,17 +1632,16 @@ config FB_TRIDENT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
- This driver is supposed to support graphics boards with the
- Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
+ This is the frame buffer device driver for Trident PCI/AGP chipsets.
+ Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+ and Blade XP.
+ There are also integrated versions of these chips called CyberXXXX,
+ CyberImage or CyberBlade. These chips are mostly found in laptops
but also on some motherboards. For more information, read
<file:Documentation/fb/tridentfb.txt>
- Cyberblade/i1 support will be removed soon, use the cyblafb driver
- instead.
-
Say Y if you have such a graphics board.
-
To compile this driver as a module, choose M here: the
module will be called tridentfb.
@@ -1876,6 +1896,28 @@ config FB_SH_MOBILE_LCDC
---help---
Frame buffer driver for the on-chip SH-Mobile LCD controller.
+config FB_TMIO
+ tristate "Toshiba Mobile IO FrameBuffer support"
+ depends on FB && MFD_CORE
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the Toshiba Mobile IO integrated as found
+ on the Sharp SL-6000 series
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called tmiofb. If you want to compile it as a module,
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
+config FB_TMIO_ACCELL
+ bool "tmiofb acceleration"
+ depends on FB_TMIO
+ default y
+
config FB_S3C2410
tristate "S3C2410 LCD framebuffer support"
depends on FB && ARCH_S3C2410
@@ -1974,19 +2016,6 @@ config FB_XILINX
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
-config FB_AM200EPD
- tristate "AM-200 E-Ink EPD devkit support"
- depends on FB && ARCH_PXA && MMU
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- select FB_METRONOME
- help
- This enables support for the Metronome display controller used on
- the E-Ink AM-200 EPD devkit.
-
config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
depends on FB && MIPS_COBALT
@@ -2041,6 +2070,19 @@ config XEN_FBDEV_FRONTEND
frame buffer driver. It communicates with a back-end
in another domain.
+config FB_METRONOME
+ tristate "E-Ink Metronome/8track controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Metronome
+ controller. The pre-release name for this device was 8track
+ and could also have been called by some vendors as PVI-nnnn.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"