diff options
Diffstat (limited to 'drivers/video/auo_k1900fb.c')
| -rw-r--r-- | drivers/video/auo_k1900fb.c | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/drivers/video/auo_k1900fb.c b/drivers/video/auo_k1900fb.c new file mode 100644 index 00000000000..c36cf961dcb --- /dev/null +++ b/drivers/video/auo_k1900fb.c @@ -0,0 +1,198 @@ +/* + * auok190xfb.c -- FB driver for AUO-K1900 controllers + * + * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de> + * + * based on broadsheetfb.c + * + * Copyright (C) 2008, Jaya Kumar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. + * + * This driver is written to be used with the AUO-K1900 display controller. + * + * It is intended to be architecture independent. A board specific driver + * must be used to perform all the physical IO interactions. + * + * The controller supports different update modes: + * mode0+1 16 step gray (4bit) + * mode2 4 step gray (2bit) - FIXME: add strange refresh + * mode3 2 step gray (1bit) - FIXME: add strange refresh + * mode4 handwriting mode (strange behaviour) + * mode5 automatic selection of update mode + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/list.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/pm_runtime.h> + +#include <video/auo_k190xfb.h> + +#include "auo_k190x.h" + +/* + * AUO-K1900 specific commands + */ + +#define AUOK1900_CMD_PARTIALDISP 0x1001 +#define AUOK1900_CMD_ROTATION 0x1006 +#define AUOK1900_CMD_LUT_STOP 0x1009 + +#define AUOK1900_INIT_TEMP_AVERAGE (1 << 13) +#define AUOK1900_INIT_ROTATE(_x) ((_x & 0x3) << 10) +#define AUOK1900_INIT_RESOLUTION(_res) ((_res & 0x7) << 2) + +static void auok1900_init(struct auok190xfb_par *par) +{ + struct auok190x_board *board = par->board; + u16 init_param = 0; + + init_param |= AUOK1900_INIT_TEMP_AVERAGE; + init_param |= AUOK1900_INIT_ROTATE(par->rotation); + init_param |= AUOK190X_INIT_INVERSE_WHITE; + init_param |= AUOK190X_INIT_FORMAT0; + init_param |= AUOK1900_INIT_RESOLUTION(par->resolution); + init_param |= AUOK190X_INIT_SHIFT_RIGHT; + + auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param); + + /* let the controller finish */ + board->wait_for_rdy(par); +} + +static void auok1900_update_region(struct auok190xfb_par *par, int mode, + u16 y1, u16 y2) +{ + struct device *dev = par->info->device; + unsigned char *buf = (unsigned char *)par->info->screen_base; + int xres = par->info->var.xres; + u16 args[4]; + + pm_runtime_get_sync(dev); + + mutex_lock(&(par->io_lock)); + + /* y1 and y2 must be a multiple of 2 so drop the lowest bit */ + y1 &= 0xfffe; + y2 &= 0xfffe; + + dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n", + 1, y1+1, xres, y2-y1, mode); + + /* to FIX handle different partial update modes */ + args[0] = mode | 1; + args[1] = y1 + 1; + args[2] = xres; + args[3] = y2 - y1; + buf += y1 * xres; + auok190x_send_cmdargs_pixels(par, AUOK1900_CMD_PARTIALDISP, 4, args, + ((y2 - y1) * xres)/2, (u16 *) buf); + auok190x_send_command(par, AUOK190X_CMD_DATA_STOP); + + par->update_cnt++; + + mutex_unlock(&(par->io_lock)); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); +} + +static void auok1900fb_dpy_update_pages(struct auok190xfb_par *par, + u16 y1, u16 y2) +{ + int mode; + + if (par->update_mode < 0) { + mode = AUOK190X_UPDATE_MODE(1); + par->last_mode = -1; + } else { + mode = AUOK190X_UPDATE_MODE(par->update_mode); + par->last_mode = par->update_mode; + } + + if (par->flash) + mode |= AUOK190X_UPDATE_NONFLASH; + + auok1900_update_region(par, mode, y1, y2); +} + +static void auok1900fb_dpy_update(struct auok190xfb_par *par) +{ + int mode; + + if (par->update_mode < 0) { + mode = AUOK190X_UPDATE_MODE(0); + par->last_mode = -1; + } else { + mode = AUOK190X_UPDATE_MODE(par->update_mode); + par->last_mode = par->update_mode; + } + + if (par->flash) + mode |= AUOK190X_UPDATE_NONFLASH; + + auok1900_update_region(par, mode, 0, par->info->var.yres); + par->update_cnt = 0; +} + +static bool auok1900fb_need_refresh(struct auok190xfb_par *par) +{ + return (par->update_cnt > 10); +} + +static int __devinit auok1900fb_probe(struct platform_device *pdev) +{ + struct auok190x_init_data init; + struct auok190x_board *board; + + /* pick up board specific routines */ + board = pdev->dev.platform_data; + if (!board) + return -EINVAL; + + /* fill temporary init struct for common init */ + init.id = "auo_k1900fb"; + init.board = board; + init.update_partial = auok1900fb_dpy_update_pages; + init.update_all = auok1900fb_dpy_update; + init.need_refresh = auok1900fb_need_refresh; + init.init = auok1900_init; + + return auok190x_common_probe(pdev, &init); +} + +static int __devexit auok1900fb_remove(struct platform_device *pdev) +{ + return auok190x_common_remove(pdev); +} + +static struct platform_driver auok1900fb_driver = { + .probe = auok1900fb_probe, + .remove = __devexit_p(auok1900fb_remove), + .driver = { + .owner = THIS_MODULE, + .name = "auo_k1900fb", + .pm = &auok190x_pm, + }, +}; +module_platform_driver(auok1900fb_driver); + +MODULE_DESCRIPTION("framebuffer driver for the AUO-K1900 EPD controller"); +MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); +MODULE_LICENSE("GPL"); |