diff options
Diffstat (limited to 'drivers/video/backlight')
| -rw-r--r-- | drivers/video/backlight/Kconfig | 37 | ||||
| -rw-r--r-- | drivers/video/backlight/Makefile | 4 | ||||
| -rw-r--r-- | drivers/video/backlight/corgi_lcd.c | 4 | ||||
| -rw-r--r-- | drivers/video/backlight/da903x.c | 203 | ||||
| -rw-r--r-- | drivers/video/backlight/kb3886_bl.c | 204 | ||||
| -rw-r--r-- | drivers/video/backlight/lcd.c | 11 | ||||
| -rw-r--r-- | drivers/video/backlight/tosa_bl.c | 198 | ||||
| -rw-r--r-- | drivers/video/backlight/tosa_lcd.c | 280 |
8 files changed, 934 insertions, 7 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index c72a1356295..4a4dd9adc32 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -75,6 +75,15 @@ config LCD_PLATFORM This driver provides a platform-device registered LCD power control interface. +config LCD_TOSA + tristate "Sharp SL-6000 LCD Driver" + depends on LCD_CLASS_DEVICE && SPI + depends on MACH_TOSA + default n + help + If you have an Sharp SL-6000 Zaurus say Y to enable a driver + for its LCD. + # # Backlight # @@ -115,7 +124,7 @@ config BACKLIGHT_ATMEL_PWM called atmel-pwm-bl. config BACKLIGHT_CORGI - tristate "Generic (aka Sharp Corgi) Backlight Driver" + tristate "Generic (aka Sharp Corgi) Backlight Driver (DEPRECATED)" depends on BACKLIGHT_CLASS_DEVICE default n help @@ -123,6 +132,9 @@ config BACKLIGHT_CORGI known as the Corgi backlight driver. If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y. Most users can say n. + Note: this driver is marked as deprecated, try enable SPI and + use the new corgi_lcd driver with integrated backlight control + config BACKLIGHT_LOCOMO tristate "Sharp LOCOMO LCD/Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO @@ -171,6 +183,13 @@ config BACKLIGHT_PWM If you have a LCD backlight adjustable by PWM, say Y to enable this driver. +config BACKLIGHT_DA903X + tristate "Backlight Driver for DA9030/DA9034 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && PMIC_DA903X + help + If you have a LCD backlight connected to the WLED output of DA9030 + or DA9034 WLED output, say Y here to enable this driver. + config BACKLIGHT_MBP_NVIDIA tristate "MacBook Pro Nvidia Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE && X86 @@ -179,3 +198,19 @@ config BACKLIGHT_MBP_NVIDIA If you have an Apple Macbook Pro with Nvidia graphics hardware say Y to enable a driver for its backlight +config BACKLIGHT_TOSA + tristate "Sharp SL-6000 Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && I2C + depends on MACH_TOSA && LCD_TOSA + default n + help + If you have an Sharp SL-6000 Zaurus say Y to enable a driver + for its backlight + +config BACKLIGHT_SAHARA + tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && X86 + default n + help + If you have a Tabletkiosk Sahara Touch-iT, say y to enable the + backlight driver. diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 3ec551eb472..103427de670 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_LCD_ILI9320) += ili9320.o obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o obj-$(CONFIG_LCD_TDO24M) += tdo24m.o +obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o @@ -17,5 +18,8 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o +obj-$(CONFIG_BACKLIGHT_DA903X) += da903x.o obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o +obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o +obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index 2afd47eefe7..f8a4bb20f41 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -439,7 +439,7 @@ static int corgi_bl_update_status(struct backlight_device *bd) return corgi_bl_set_intensity(lcd, intensity); } -void corgibl_limit_intensity(int limit) +void corgi_lcd_limit_intensity(int limit) { if (limit) corgibl_flags |= CORGIBL_BATTLOW; @@ -448,7 +448,7 @@ void corgibl_limit_intensity(int limit) backlight_update_status(the_corgi_lcd->bl_dev); } -EXPORT_SYMBOL(corgibl_limit_intensity); +EXPORT_SYMBOL(corgi_lcd_limit_intensity); static struct backlight_ops corgi_bl_ops = { .get_brightness = corgi_bl_get_intensity, diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x.c new file mode 100644 index 00000000000..93bb4340cc6 --- /dev/null +++ b/drivers/video/backlight/da903x.c @@ -0,0 +1,203 @@ +/* + * Backlight driver for Dialog Semiconductor DA9030/DA9034 + * + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/mfd/da903x.h> + +#define DA9030_WLED_CONTROL 0x25 +#define DA9030_WLED_CP_EN (1 << 6) +#define DA9030_WLED_TRIM(x) ((x) & 0x7) + +#define DA9034_WLED_CONTROL1 0x3C +#define DA9034_WLED_CONTROL2 0x3D + +#define DA9034_WLED_BOOST_EN (1 << 5) + +#define DA9030_MAX_BRIGHTNESS 7 +#define DA9034_MAX_BRIGHTNESS 0x7f + +struct da903x_backlight_data { + struct device *da903x_dev; + int id; + int current_brightness; +}; + +static int da903x_backlight_set(struct backlight_device *bl, int brightness) +{ + struct da903x_backlight_data *data = bl_get_data(bl); + struct device *dev = data->da903x_dev; + uint8_t val; + int ret = 0; + + switch (data->id) { + case DA9034_ID_WLED: + ret = da903x_update(dev, DA9034_WLED_CONTROL1, + brightness, 0x7f); + if (ret) + return ret; + + if (data->current_brightness && brightness == 0) + ret = da903x_clr_bits(dev, + DA9034_WLED_CONTROL2, + DA9034_WLED_BOOST_EN); + + if (data->current_brightness == 0 && brightness) + ret = da903x_set_bits(dev, + DA9034_WLED_CONTROL2, + DA9034_WLED_BOOST_EN); + break; + case DA9030_ID_WLED: + val = DA9030_WLED_TRIM(brightness); + val |= brightness ? DA9030_WLED_CP_EN : 0; + ret = da903x_write(dev, DA9030_WLED_CONTROL, val); + break; + } + + if (ret) + return ret; + + data->current_brightness = brightness; + return 0; +} + +static int da903x_backlight_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + + if (bl->props.power != FB_BLANK_UNBLANK) + brightness = 0; + + if (bl->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + return da903x_backlight_set(bl, brightness); +} + +static int da903x_backlight_get_brightness(struct backlight_device *bl) +{ + struct da903x_backlight_data *data = bl_get_data(bl); + return data->current_brightness; +} + +static struct backlight_ops da903x_backlight_ops = { + .update_status = da903x_backlight_update_status, + .get_brightness = da903x_backlight_get_brightness, +}; + +static int da903x_backlight_probe(struct platform_device *pdev) +{ + struct da903x_backlight_data *data; + struct backlight_device *bl; + int max_brightness; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + switch (pdev->id) { + case DA9030_ID_WLED: + max_brightness = DA9030_MAX_BRIGHTNESS; + break; + case DA9034_ID_WLED: + max_brightness = DA9034_MAX_BRIGHTNESS; + break; + default: + dev_err(&pdev->dev, "invalid backlight device ID(%d)\n", + pdev->id); + kfree(data); + return -EINVAL; + } + + data->id = pdev->id; + data->da903x_dev = pdev->dev.parent; + data->current_brightness = 0; + + bl = backlight_device_register(pdev->name, data->da903x_dev, + data, &da903x_backlight_ops); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + kfree(data); + return PTR_ERR(bl); + } + + bl->props.max_brightness = max_brightness; + bl->props.brightness = max_brightness; + + platform_set_drvdata(pdev, bl); + backlight_update_status(bl); + return 0; +} + +static int da903x_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct da903x_backlight_data *data = bl_get_data(bl); + + backlight_device_unregister(bl); + kfree(data); + return 0; +} + +#ifdef CONFIG_PM +static int da903x_backlight_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + return da903x_backlight_set(bl, 0); +} + +static int da903x_backlight_resume(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + + backlight_update_status(bl); + return 0; +} +#else +#define da903x_backlight_suspend NULL +#define da903x_backlight_resume NULL +#endif + +static struct platform_driver da903x_backlight_driver = { + .driver = { + .name = "da903x-backlight", + .owner = THIS_MODULE, + }, + .probe = da903x_backlight_probe, + .remove = da903x_backlight_remove, + .suspend = da903x_backlight_suspend, + .resume = da903x_backlight_resume, +}; + +static int __init da903x_backlight_init(void) +{ + return platform_driver_register(&da903x_backlight_driver); +} +module_init(da903x_backlight_init); + +static void __exit da903x_backlight_exit(void) +{ + platform_driver_unregister(&da903x_backlight_driver); +} +module_exit(da903x_backlight_exit); + +MODULE_DESCRIPTION("Backlight Driver for Dialog Semiconductor DA9030/DA9034"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" + "Mike Rapoport <mike@compulab.co.il>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da903x-backlight"); diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c new file mode 100644 index 00000000000..a38fda1742d --- /dev/null +++ b/drivers/video/backlight/kb3886_bl.c @@ -0,0 +1,204 @@ +/* + * Backlight Driver for the KB3886 Backlight + * + * Copyright (c) 2007-2008 Claudio Nieder + * + * Based on corgi_bl.c by Richard Purdie and kb3886 driver by Robert Woerle + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/dmi.h> + +#define KB3886_PARENT 0x64 +#define KB3886_IO 0x60 +#define KB3886_ADC_DAC_PWM 0xC4 +#define KB3886_PWM0_WRITE 0x81 +#define KB3886_PWM0_READ 0x41 + +static DEFINE_MUTEX(bl_mutex); + +static void kb3886_bl_set_intensity(int intensity) +{ + mutex_lock(&bl_mutex); + intensity = intensity&0xff; + outb(KB3886_ADC_DAC_PWM, KB3886_PARENT); + msleep(10); + outb(KB3886_PWM0_WRITE, KB3886_IO); + msleep(10); + outb(intensity, KB3886_IO); + mutex_unlock(&bl_mutex); +} + +struct kb3886bl_machinfo { + int max_intensity; + int default_intensity; + int limit_mask; + void (*set_bl_intensity)(int intensity); +}; + +static struct kb3886bl_machinfo kb3886_bl_machinfo = { + .max_intensity = 0xff, + .default_intensity = 0xa0, + .limit_mask = 0x7f, + .set_bl_intensity = kb3886_bl_set_intensity, +}; + +static struct platform_device kb3886bl_device = { + .name = "kb3886-bl", + .dev = { + .platform_data = &kb3886_bl_machinfo, + }, + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &kb3886bl_device, +}; + +/* + * Back to driver + */ + +static int kb3886bl_intensity; +static struct backlight_device *kb3886_backlight_device; +static struct kb3886bl_machinfo *bl_machinfo; + +static unsigned long kb3886bl_flags; +#define KB3886BL_SUSPENDED 0x01 + +static struct dmi_system_id __initdata kb3886bl_device_table[] = { + { + .ident = "Sahara Touch-iT", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SDV"), + DMI_MATCH(DMI_PRODUCT_NAME, "iTouch T201"), + }, + }, + { } +}; + +static int kb3886bl_send_intensity(struct backlight_device *bd) +{ + int intensity = bd->props.brightness; + + if (bd->props.power != FB_BLANK_UNBLANK) + intensity = 0; + if (bd->props.fb_blank != FB_BLANK_UNBLANK) + intensity = 0; + if (kb3886bl_flags & KB3886BL_SUSPENDED) + intensity = 0; + + bl_machinfo->set_bl_intensity(intensity); + + kb3886bl_intensity = intensity; + return 0; +} + +#ifdef CONFIG_PM +static int kb3886bl_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct backlight_device *bd = platform_get_drvdata(pdev); + + kb3886bl_flags |= KB3886BL_SUSPENDED; + backlight_update_status(bd); + return 0; +} + +static int kb3886bl_resume(struct platform_device *pdev) +{ + struct backlight_device *bd = platform_get_drvdata(pdev); + + kb3886bl_flags &= ~KB3886BL_SUSPENDED; + backlight_update_status(bd); + return 0; +} +#else +#define kb3886bl_suspend NULL +#define kb3886bl_resume NULL +#endif + +static int kb3886bl_get_intensity(struct backlight_device *bd) +{ + return kb3886bl_intensity; +} + +static struct backlight_ops kb3886bl_ops = { + .get_brightness = kb3886bl_get_intensity, + .update_status = kb3886bl_send_intensity, +}; + +static int kb3886bl_probe(struct platform_device *pdev) +{ + struct kb3886bl_machinfo *machinfo = pdev->dev.platform_data; + + bl_machinfo = machinfo; + if (!machinfo->limit_mask) + machinfo->limit_mask = -1; + + kb3886_backlight_device = backlight_device_register("kb3886-bl", + &pdev->dev, NULL, &kb3886bl_ops); + if (IS_ERR(kb3886_backlight_device)) + return PTR_ERR(kb3886_backlight_device); + + platform_set_drvdata(pdev, kb3886_backlight_device); + + kb3886_backlight_device->props.max_brightness = machinfo->max_intensity; + kb3886_backlight_device->props.power = FB_BLANK_UNBLANK; + kb3886_backlight_device->props.brightness = machinfo->default_intensity; + backlight_update_status(kb3886_backlight_device); + + return 0; +} + +static int kb3886bl_remove(struct platform_device *pdev) +{ + struct backlight_device *bd = platform_get_drvdata(pdev); + + backlight_device_unregister(bd); + + return 0; +} + +static struct platform_driver kb3886bl_driver = { + .probe = kb3886bl_probe, + .remove = kb3886bl_remove, + .suspend = kb3886bl_suspend, + .resume = kb3886bl_resume, + .driver = { + .name = "kb3886-bl", + }, +}; + +static int __init kb3886_init(void) +{ + if (!dmi_check_system(kb3886bl_device_table)) + return -ENODEV; + + platform_add_devices(devices, ARRAY_SIZE(devices)); + return platform_driver_register(&kb3886bl_driver); +} + +static void __exit kb3886_exit(void) +{ + platform_driver_unregister(&kb3886bl_driver); +} + +module_init(kb3886_init); +module_exit(kb3886_exit); + +MODULE_AUTHOR("Claudio Nieder <private@claudio.ch>"); +MODULE_DESCRIPTION("Tabletkiosk Sahara Touch-iT Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("dmi:*:svnSDV:pniTouchT201:*"); diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index 8e1731d3b22..680e57b616c 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -42,10 +42,13 @@ static int fb_notifier_callback(struct notifier_block *self, mutex_lock(&ld->ops_lock); if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) { - if (event == FB_EVENT_BLANK) - ld->ops->set_power(ld, *(int *)evdata->data); - else - ld->ops->set_mode(ld, evdata->data); + if (event == FB_EVENT_BLANK) { + if (ld->ops->set_power) + ld->ops->set_power(ld, *(int *)evdata->data); + } else { + if (ld->ops->set_mode) + ld->ops->set_mode(ld, evdata->data); + } } mutex_unlock(&ld->ops_lock); return 0; diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c new file mode 100644 index 00000000000..43edbada12d --- /dev/null +++ b/drivers/video/backlight/tosa_bl.c @@ -0,0 +1,198 @@ +/* + * LCD / Backlight control code for Sharp SL-6000x (tosa) + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2007,2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/fb.h> +#include <linux/backlight.h> + +#include <asm/mach/sharpsl_param.h> + +#include <mach/tosa.h> + +#define COMADJ_DEFAULT 97 + +#define DAC_CH1 0 +#define DAC_CH2 1 + +struct tosa_bl_data { + struct i2c_client *i2c; + struct backlight_device *bl; + + int comadj; +}; + +static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness) +{ + struct spi_device *spi = data->i2c->dev.platform_data; + + i2c_smbus_write_byte_data(data->i2c, DAC_CH1, data->comadj); + + /* SetBacklightDuty */ + i2c_smbus_write_byte_data(data->i2c, DAC_CH2, (u8)(brightness & 0xff)); + + /* SetBacklightVR */ + gpio_set_value(TOSA_GPIO_BL_C20MA, brightness & 0x100); + + tosa_bl_enable(spi, brightness); +} + +static int tosa_bl_update_status(struct backlight_device *dev) +{ + struct backlight_properties *props = &dev->props; + struct tosa_bl_data *data = dev_get_drvdata(&dev->dev); + int power = max(props->power, props->fb_blank); + int brightness = props->brightness; + + if (power) + brightness = 0; + + tosa_bl_set_backlight(data, brightness); + + return 0; +} + +static int tosa_bl_get_brightness(struct backlight_device *dev) +{ + struct backlight_properties *props = &dev->props; + + return props->brightness; +} + +static struct backlight_ops bl_ops = { + .get_brightness = tosa_bl_get_brightness, + .update_status = tosa_bl_update_status, +}; + +static int __devinit tosa_bl_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tosa_bl_data *data = kzalloc(sizeof(struct tosa_bl_data), GFP_KERNEL); + int ret = 0; + if (!data) + return -ENOMEM; + + data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj; + + ret = gpio_request(TOSA_GPIO_BL_C20MA, "backlight"); + if (ret) { + dev_dbg(&data->bl->dev, "Unable to request gpio!\n"); + goto err_gpio_bl; + } + ret = gpio_direction_output(TOSA_GPIO_BL_C20MA, 0); + if (ret) + goto err_gpio_dir; + + i2c_set_clientdata(client, data); + data->i2c = client; + + data->bl = backlight_device_register("tosa-bl", &client->dev, + data, &bl_ops); + if (IS_ERR(data->bl)) { + ret = PTR_ERR(data->bl); + goto err_reg; + } + + data->bl->props.brightness = 69; + data->bl->props.max_brightness = 512 - 1; + data->bl->props.power = FB_BLANK_UNBLANK; + + backlight_update_status(data->bl); + + return 0; + +err_reg: + data->bl = NULL; + i2c_set_clientdata(client, NULL); +err_gpio_dir: + gpio_free(TOSA_GPIO_BL_C20MA); +err_gpio_bl: + kfree(data); + return ret; +} + +static int __devexit tosa_bl_remove(struct i2c_client *client) +{ + struct tosa_bl_data *data = i2c_get_clientdata(client); + + backlight_device_unregister(data->bl); + data->bl = NULL; + i2c_set_clientdata(client, NULL); + + gpio_free(TOSA_GPIO_BL_C20MA); + + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int tosa_bl_suspend(struct i2c_client *client, pm_message_t pm) +{ + struct tosa_bl_data *data = i2c_get_clientdata(client); + + tosa_bl_set_backlight(data, 0); + + return 0; +} + +static int tosa_bl_resume(struct i2c_client *client) +{ + struct tosa_bl_data *data = i2c_get_clientdata(client); + + backlight_update_status(data->bl); + return 0; +} +#else +#define tosa_bl_suspend NULL +#define tosa_bl_resume NULL +#endif + +static const struct i2c_device_id tosa_bl_id[] = { + { "tosa-bl", 0 }, + { }, +}; + + +static struct i2c_driver tosa_bl_driver = { + .driver = { + .name = "tosa-bl", + .owner = THIS_MODULE, + }, + .probe = tosa_bl_probe, + .remove = __devexit_p(tosa_bl_remove), + .suspend = tosa_bl_suspend, + .resume = tosa_bl_resume, + .id_table = tosa_bl_id, +}; + +static int __init tosa_bl_init(void) +{ + return i2c_add_driver(&tosa_bl_driver); +} + +static void __exit tosa_bl_exit(void) +{ + i2c_del_driver(&tosa_bl_driver); +} + +module_init(tosa_bl_init); +module_exit(tosa_bl_exit); + +MODULE_AUTHOR("Dmitry Baryshkov"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA"); + diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c new file mode 100644 index 00000000000..57a26649f1a --- /dev/null +++ b/drivers/video/backlight/tosa_lcd.c @@ -0,0 +1,280 @@ +/* + * LCD / Backlight control code for Sharp SL-6000x (tosa) + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2007,2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/lcd.h> +#include <linux/fb.h> + +#include <asm/mach/sharpsl_param.h> + +#include <mach/tosa.h> + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +#define TG_REG0_VQV 0x0001 +#define TG_REG0_COLOR 0x0002 +#define TG_REG0_UD 0x0004 +#define TG_REG0_LR 0x0008 + +#define DAC_BASE 0x4e + +struct tosa_lcd_data { + struct spi_device *spi; + struct lcd_device *lcd; + struct i2c_client *i2c; + + int lcd_power; +}; + +static int tosa_tg_send(struct spi_device *spi, int adrs, uint8_t data) +{ + u8 buf[1]; + struct spi_message msg; + struct spi_transfer xfer = { + .len = 1, + .cs_change = 1, + .tx_buf = buf, + }; + + buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f); + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + return spi_sync(spi, &msg); +} + +int tosa_bl_enable(struct spi_device *spi, int enable) +{ + /* bl_enable GP04=1 otherwise GP04=0*/ + return tosa_tg_send(spi, TG_GPODR2, enable? 0x01 : 0x00); +} +EXPORT_SYMBOL(tosa_bl_enable); + +static void tosa_lcd_tg_init(struct tosa_lcd_data *data) +{ + /* TG on */ + gpio_set_value(TOSA_GPIO_TG_ON, 0); + + mdelay(60); + + /* delayed 0clk TCTL signal for VGA */ + tosa_tg_send(data->spi, TG_TPOSCTL, 0x00); + /* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */ + tosa_tg_send(data->spi, TG_GPOSR, 0x02); +} + +static void tosa_lcd_tg_on(struct tosa_lcd_data *data) +{ + struct spi_device *spi = data->spi; + const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR; + tosa_tg_send(spi, TG_PNLCTL, value | TG_REG0_VQV); /* this depends on mode */ + + /* TG LCD pannel power up */ + tosa_tg_send(spi, TG_PINICTL,0x4); + mdelay(50); + + /* TG LCD GVSS */ + tosa_tg_send(spi, TG_PINICTL,0x0); + + if (!data->i2c) { + /* after the pannel is powered up the first time, we can access the i2c bus */ + /* so probe for the DAC */ + struct i2c_adapter *adap = i2c_get_adapter(0); + struct i2c_board_info info = { + .type = "tosa-bl", + .addr = DAC_BASE, + .platform_data = data->spi, + }; + data->i2c = i2c_new_device(adap, &info); + } +} + +static void tosa_lcd_tg_off(struct tosa_lcd_data *data) +{ + struct spi_device *spi = data->spi; + + /* TG LCD VHSA off */ + tosa_tg_send(spi, TG_PINICTL,0x4); + mdelay(50); + + /* TG LCD signal off */ + tosa_tg_send(spi, TG_PINICTL,0x6); + mdelay(50); + + /* TG Off */ + gpio_set_value(TOSA_GPIO_TG_ON, 1); + mdelay(100); +} + +int tosa_lcd_set_power(struct lcd_device *lcd, int power) +{ + struct tosa_lcd_data *data = lcd_get_data(lcd); + + if (POWER_IS_ON(power) && !POWER_IS_ON(data->lcd_power)) + tosa_lcd_tg_on(data); + + if (!POWER_IS_ON(power) && POWER_IS_ON(data->lcd_power)) + tosa_lcd_tg_off(data); + + data->lcd_power = power; + return 0; +} + +static int tosa_lcd_get_power(struct lcd_device *lcd) +{ + struct tosa_lcd_data *data = lcd_get_data(lcd); + + return data->lcd_power; +} + +static struct lcd_ops tosa_lcd_ops = { + .set_power = tosa_lcd_set_power, + .get_power = tosa_lcd_get_power, +}; + +static int __devinit tosa_lcd_probe(struct spi_device *spi) +{ + int ret; + struct tosa_lcd_data *data; + + data = kzalloc(sizeof(struct tosa_lcd_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* + * bits_per_word cannot be configured in platform data + */ + spi->bits_per_word = 8; + + ret = spi_setup(spi); + if (ret < 0) + goto err_spi; + + data->spi = spi; + dev_set_drvdata(&spi->dev, data); + + ret = gpio_request(TOSA_GPIO_TG_ON, "tg #pwr"); + if (ret < 0) + goto err_gpio_tg; + + mdelay(60); + + ret = gpio_direction_output(TOSA_GPIO_TG_ON, 0); + if (ret < 0) + goto err_gpio_dir; + + mdelay(60); + tosa_lcd_tg_init(data); + + tosa_lcd_tg_on(data); + + data->lcd = lcd_device_register("tosa-lcd", &spi->dev, data, + &tosa_lcd_ops); + + if (IS_ERR(data->lcd)) { + ret = PTR_ERR(data->lcd); + data->lcd = NULL; + goto err_register; + } + + return 0; + +err_register: + tosa_lcd_tg_off(data); +err_gpio_dir: + gpio_free(TOSA_GPIO_TG_ON); +err_gpio_tg: + dev_set_drvdata(&spi->dev, NULL); +err_spi: + kfree(data); + return ret; +} + +static int __devexit tosa_lcd_remove(struct spi_device *spi) +{ + struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev); + + lcd_device_unregister(data->lcd); + + if (data->i2c) + i2c_unregister_device(data->i2c); + + tosa_lcd_tg_off(data); + + gpio_free(TOSA_GPIO_TG_ON); + dev_set_drvdata(&spi->dev, NULL); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int tosa_lcd_suspend(struct spi_device *spi, pm_message_t state) +{ + struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev); + + tosa_lcd_tg_off(data); + + return 0; +} + +static int tosa_lcd_resume(struct spi_device *spi) +{ + struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev); + + tosa_lcd_tg_init(data); + if (POWER_IS_ON(data->lcd_power)) + tosa_lcd_tg_on(data); + else + tosa_lcd_tg_off(data); + + return 0; +} +#else +#define tosa_lcd_suspend NULL +#define tosa_lcd_reume NULL +#endif + +static struct spi_driver tosa_lcd_driver = { + .driver = { + .name = "tosa-lcd", + .owner = THIS_MODULE, + }, + .probe = tosa_lcd_probe, + .remove = __devexit_p(tosa_lcd_remove), + .suspend = tosa_lcd_suspend, + .resume = tosa_lcd_resume, +}; + +static int __init tosa_lcd_init(void) +{ + return spi_register_driver(&tosa_lcd_driver); +} + +static void __exit tosa_lcd_exit(void) +{ + spi_unregister_driver(&tosa_lcd_driver); +} + +module_init(tosa_lcd_init); +module_exit(tosa_lcd_exit); + +MODULE_AUTHOR("Dmitry Baryshkov"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA"); + |