summaryrefslogtreecommitdiffstats
path: root/drivers/video/backlight
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/backlight')
-rw-r--r--drivers/video/backlight/Makefile1
-rw-r--r--drivers/video/backlight/corgi_bl.c25
-rw-r--r--drivers/video/backlight/locomolcd.c157
3 files changed, 169 insertions, 14 deletions
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 9aae884475b..4af321fae39 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -3,3 +3,4 @@
obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
+obj-$(CONFIG_SHARP_LOCOMO) += locomolcd.o
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 353cb3f73cf..a3281767855 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -43,18 +43,10 @@ static void corgibl_send_intensity(int intensity)
intensity &= CORGI_LIMIT_MASK;
}
- /* Skip 0x20 as it will blank the display */
- if (intensity >= 0x20)
- intensity++;
-
spin_lock_irqsave(&bl_lock, flags);
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+
+ corgibl_mach_set_intensity(intensity);
+
spin_unlock_irqrestore(&bl_lock, flags);
}
@@ -113,8 +105,8 @@ static int corgibl_get_power(struct backlight_device *bd)
static int corgibl_set_intensity(struct backlight_device *bd, int intensity)
{
- if (intensity > CORGI_MAX_INTENSITY)
- intensity = CORGI_MAX_INTENSITY;
+ if (intensity > corgibl_data.max_brightness)
+ intensity = corgibl_data.max_brightness;
corgibl_send_intensity(intensity);
current_intensity=intensity;
return 0;
@@ -141,7 +133,6 @@ static struct backlight_properties corgibl_data = {
.owner = THIS_MODULE,
.get_power = corgibl_get_power,
.set_power = corgibl_set_power,
- .max_brightness = CORGI_MAX_INTENSITY,
.get_brightness = corgibl_get_intensity,
.set_brightness = corgibl_set_intensity,
};
@@ -150,12 +141,18 @@ static struct backlight_device *corgi_backlight_device;
static int __init corgibl_probe(struct device *dev)
{
+ struct corgibl_machinfo *machinfo = dev->platform_data;
+
+ corgibl_data.max_brightness = machinfo->max_intensity;
+ corgibl_mach_set_intensity = machinfo->set_bl_intensity;
+
corgi_backlight_device = backlight_device_register ("corgi-bl",
NULL, &corgibl_data);
if (IS_ERR (corgi_backlight_device))
return PTR_ERR (corgi_backlight_device);
corgibl_set_intensity(NULL, CORGI_DEFAULT_INTENSITY);
+ corgibl_limit_intensity(0);
printk("Corgi Backlight Driver Initialized.\n");
return 0;
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
new file mode 100644
index 00000000000..ada6e75eb04
--- /dev/null
+++ b/drivers/video/backlight/locomolcd.c
@@ -0,0 +1,157 @@
+/*
+ * Backlight control code for Sharp Zaurus SL-5500
+ *
+ * Copyright 2005 John Lenz <lenz@cs.wisc.edu>
+ * Maintainer: Pavel Machek <pavel@suse.cz> (unless John wants to :-)
+ * GPL v2
+ *
+ * This driver assumes single CPU. That's okay, because collie is
+ * slightly old hardware, and noone is going to retrofit second CPU to
+ * old PDA.
+ */
+
+/* LCD power functions */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include <asm/hardware/locomo.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_SA1100_COLLIE
+#include <asm/arch/collie.h>
+#else
+#include <asm/arch/poodle.h>
+#endif
+
+extern void (*sa1100fb_lcd_power)(int on);
+
+static struct locomo_dev *locomolcd_dev;
+
+static void locomolcd_on(int comadj)
+{
+ locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_VSHA_ON, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHA_ON, 1);
+ mdelay(2);
+
+ locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_VSHD_ON, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHD_ON, 1);
+ mdelay(2);
+
+ locomo_m62332_senddata(locomolcd_dev, comadj, 0);
+ mdelay(5);
+
+ locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_VEE_ON, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VEE_ON, 1);
+ mdelay(10);
+
+ /* TFTCRST | CPSOUT=0 | CPSEN */
+ locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC);
+
+ /* Set CPSD */
+ locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD);
+
+ /* TFTCRST | CPSOUT=0 | CPSEN */
+ locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC);
+ mdelay(10);
+
+ locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_MOD, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_MOD, 1);
+}
+
+static void locomolcd_off(int comadj)
+{
+ /* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */
+ locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC);
+ mdelay(1);
+
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHA_ON, 0);
+ mdelay(110);
+
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VEE_ON, 0);
+ mdelay(700);
+
+ /* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */
+ locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_MOD, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHD_ON, 0);
+}
+
+void locomolcd_power(int on)
+{
+ int comadj = 118;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (!locomolcd_dev) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ /* read comadj */
+#ifdef CONFIG_MACH_POODLE
+ comadj = 118;
+#else
+ comadj = 128;
+#endif
+
+ if (on)
+ locomolcd_on(comadj);
+ else
+ locomolcd_off(comadj);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(locomolcd_power);
+
+static int poodle_lcd_probe(struct locomo_dev *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ locomolcd_dev = dev;
+
+ /* the poodle_lcd_power function is called for the first time
+ * from fs_initcall, which is before locomo is activated.
+ * We need to recall poodle_lcd_power here*/
+#ifdef CONFIG_MACH_POODLE
+ locomolcd_power(1);
+#endif
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int poodle_lcd_remove(struct locomo_dev *dev)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+ locomolcd_dev = NULL;
+ local_irq_restore(flags);
+ return 0;
+}
+
+static struct locomo_driver poodle_lcd_driver = {
+ .drv = {
+ .name = "locomo-backlight",
+ },
+ .devid = LOCOMO_DEVID_BACKLIGHT,
+ .probe = poodle_lcd_probe,
+ .remove = poodle_lcd_remove,
+};
+
+static int __init poodle_lcd_init(void)
+{
+ int ret = locomo_driver_register(&poodle_lcd_driver);
+ if (ret) return ret;
+
+#ifdef CONFIG_SA1100_COLLIE
+ sa1100fb_lcd_power = locomolcd_power;
+#endif
+ return 0;
+}
+device_initcall(poodle_lcd_init);
+
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-24 19:48:26 +0000