diff options
Diffstat (limited to 'drivers/video/cyber2000fb.c')
| -rw-r--r-- | drivers/video/cyber2000fb.c | 1761 |
1 files changed, 1761 insertions, 0 deletions
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c new file mode 100644 index 00000000000..8b1b7c687a9 --- /dev/null +++ b/drivers/video/cyber2000fb.c @@ -0,0 +1,1761 @@ +/* + * linux/drivers/video/cyber2000fb.c + * + * Copyright (C) 1998-2002 Russell King + * + * MIPS and 50xx clock support + * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com> + * + * 32 bit support, text color and panning fixes for modes != 8 bit + * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device + * + * Based on cyberfb.c. + * + * Note that we now use the new fbcon fix, var and cmap scheme. We do + * still have to check which console is the currently displayed one + * however, especially for the colourmap stuff. + * + * We also use the new hotplug PCI subsystem. I'm not sure if there + * are any such cards, but I'm erring on the side of caution. We don't + * want to go pop just because someone does have one. + * + * Note that this doesn't work fully in the case of multiple CyberPro + * cards with grabbers. We currently can only attach to the first + * CyberPro card found. + * + * When we're in truecolour mode, we power down the LUT RAM as a power + * saving feature. Also, when we enter any of the powersaving modes + * (except soft blanking) we power down the RAMDACs. This saves about + * 1W, which is roughly 8% of the power consumption of a NetWinder + * (which, incidentally, is about the same saving as a 2.5in hard disk + * entering standby mode.) + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/uaccess.h> + +#ifdef __arm__ +#include <asm/mach-types.h> +#endif + +#include "cyber2000fb.h" + +struct cfb_info { + struct fb_info fb; + struct display_switch *dispsw; + struct display *display; + struct pci_dev *dev; + unsigned char __iomem *region; + unsigned char __iomem *regs; + u_int id; + int func_use_count; + u_long ref_ps; + + /* + * Clock divisors + */ + u_int divisors[4]; + + struct { + u8 red, green, blue; + } palette[NR_PALETTE]; + + u_char mem_ctl1; + u_char mem_ctl2; + u_char mclk_mult; + u_char mclk_div; + /* + * RAMDAC control register is both of these or'ed together + */ + u_char ramdac_ctrl; + u_char ramdac_powerdown; +}; + +static char *default_font = "Acorn8x8"; +module_param(default_font, charp, 0); +MODULE_PARM_DESC(default_font, "Default font name"); + +/* + * Our access methods. + */ +#define cyber2000fb_writel(val,reg,cfb) writel(val, (cfb)->regs + (reg)) +#define cyber2000fb_writew(val,reg,cfb) writew(val, (cfb)->regs + (reg)) +#define cyber2000fb_writeb(val,reg,cfb) writeb(val, (cfb)->regs + (reg)) + +#define cyber2000fb_readb(reg,cfb) readb((cfb)->regs + (reg)) + +static inline void +cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb) +{ + cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb); +} + +static inline void +cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb) +{ + cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb); +} + +static inline unsigned int +cyber2000_grphr(unsigned int reg, struct cfb_info *cfb) +{ + cyber2000fb_writeb(reg, 0x3ce, cfb); + return cyber2000fb_readb(0x3cf, cfb); +} + +static inline void +cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb) +{ + cyber2000fb_readb(0x3da, cfb); + cyber2000fb_writeb(reg, 0x3c0, cfb); + cyber2000fb_readb(0x3c1, cfb); + cyber2000fb_writeb(val, 0x3c0, cfb); +} + +static inline void +cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb) +{ + cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb); +} + +/* -------------------- Hardware specific routines ------------------------- */ + +/* + * Hardware Cyber2000 Acceleration + */ +static void +cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + struct cfb_info *cfb = (struct cfb_info *)info; + unsigned long dst, col; + + if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { + cfb_fillrect(info, rect); + return; + } + + cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); + cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb); + cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb); + + col = rect->color; + if (cfb->fb.var.bits_per_pixel > 8) + col = ((u32 *)cfb->fb.pseudo_palette)[col]; + cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb); + + dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual; + if (cfb->fb.var.bits_per_pixel == 24) { + cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); + dst *= 3; + } + + cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); + cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); + cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb); + cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb); +} + +static void +cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region) +{ + struct cfb_info *cfb = (struct cfb_info *)info; + unsigned int cmd = CO_CMD_L_PATTERN_FGCOL; + unsigned long src, dst; + + if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { + cfb_copyarea(info, region); + return; + } + + cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); + cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb); + cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb); + + src = region->sx + region->sy * cfb->fb.var.xres_virtual; + dst = region->dx + region->dy * cfb->fb.var.xres_virtual; + + if (region->sx < region->dx) { + src += region->width - 1; + dst += region->width - 1; + cmd |= CO_CMD_L_INC_LEFT; + } + + if (region->sy < region->dy) { + src += (region->height - 1) * cfb->fb.var.xres_virtual; + dst += (region->height - 1) * cfb->fb.var.xres_virtual; + cmd |= CO_CMD_L_INC_UP; + } + + if (cfb->fb.var.bits_per_pixel == 24) { + cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); + src *= 3; + dst *= 3; + } + cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb); + cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); + cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); + cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb); + cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER, + CO_REG_CMD_H, cfb); +} + +static void +cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image) +{ +// struct cfb_info *cfb = (struct cfb_info *)info; + +// if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { + cfb_imageblit(info, image); + return; +// } +} + +static int cyber2000fb_sync(struct fb_info *info) +{ + struct cfb_info *cfb = (struct cfb_info *)info; + int count = 100000; + + if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) + return 0; + + while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) { + if (!count--) { + debug_printf("accel_wait timed out\n"); + cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); + break; + } + udelay(1); + } + return 0; +} + +/* + * =========================================================================== + */ + +static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf) +{ + u_int mask = (1 << bf->length) - 1; + + return (val >> (16 - bf->length) & mask) << bf->offset; +} + +/* + * Set a single color register. Return != 0 for invalid regno. + */ +static int +cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, + u_int transp, struct fb_info *info) +{ + struct cfb_info *cfb = (struct cfb_info *)info; + struct fb_var_screeninfo *var = &cfb->fb.var; + u32 pseudo_val; + int ret = 1; + + switch (cfb->fb.fix.visual) { + default: + return 1; + + /* + * Pseudocolour: + * 8 8 + * pixel --/--+--/--> red lut --> red dac + * | 8 + * +--/--> green lut --> green dac + * | 8 + * +--/--> blue lut --> blue dac + */ + case FB_VISUAL_PSEUDOCOLOR: + if (regno >= NR_PALETTE) + return 1; + + red >>= 8; + green >>= 8; + blue >>= 8; + + cfb->palette[regno].red = red; + cfb->palette[regno].green = green; + cfb->palette[regno].blue = blue; + + cyber2000fb_writeb(regno, 0x3c8, cfb); + cyber2000fb_writeb(red, 0x3c9, cfb); + cyber2000fb_writeb(green, 0x3c9, cfb); + cyber2000fb_writeb(blue, 0x3c9, cfb); + return 0; + + /* + * Direct colour: + * n rl + * pixel --/--+--/--> red lut --> red dac + * | gl + * +--/--> green lut --> green dac + * | bl + * +--/--> blue lut --> blue dac + * n = bpp, rl = red length, gl = green length, bl = blue length + */ + case FB_VISUAL_DIRECTCOLOR: + red >>= 8; + green >>= 8; + blue >>= 8; + + if (var->green.length == 6 && regno < 64) { + cfb->palette[regno << 2].green = green; + + /* + * The 6 bits of the green component are applied + * to the high 6 bits of the LUT. + */ + cyber2000fb_writeb(regno << 2, 0x3c8, cfb); + cyber2000fb_writeb(cfb->palette[regno >> 1].red, 0x3c9, cfb); + cyber2000fb_writeb(green, 0x3c9, cfb); + cyber2000fb_writeb(cfb->palette[regno >> 1].blue, 0x3c9, cfb); + + green = cfb->palette[regno << 3].green; + + ret = 0; + } + + if (var->green.length >= 5 && regno < 32) { + cfb->palette[regno << 3].red = red; + cfb->palette[regno << 3].green = green; + cfb->palette[regno << 3].blue = blue; + + /* + * The 5 bits of each colour component are + * applied to the high 5 bits of the LUT. + */ + cyber2000fb_writeb(regno << 3, 0x3c8, cfb); + cyber2000fb_writeb(red, 0x3c9, cfb); + cyber2000fb_writeb(green, 0x3c9, cfb); + cyber2000fb_writeb(blue, 0x3c9, cfb); + ret = 0; + } + + if (var->green.length == 4 && regno < 16) { + cfb->palette[regno << 4].red = red; + cfb->palette[regno << 4].green = green; + cfb->palette[regno << 4].blue = blue; + + /* + * The 5 bits of each colour component are + * applied to the high 5 bits of the LUT. + */ + cyber2000fb_writeb(regno << 4, 0x3c8, cfb); + cyber2000fb_writeb(red, 0x3c9, cfb); + cyber2000fb_writeb(green, 0x3c9, cfb); + cyber2000fb_writeb(blue, 0x3c9, cfb); + ret = 0; + } + + /* + * Since this is only used for the first 16 colours, we + * don't have to care about overflowing for regno >= 32 + */ + pseudo_val = regno << var->red.offset | + regno << var->green.offset | + regno << var->blue.offset; + break; + + /* + * True colour: + * n rl + * pixel --/--+--/--> red dac + * | gl + * +--/--> green dac + * | bl + * +--/--> blue dac + * n = bpp, rl = red length, gl = green length, bl = blue length + */ + case FB_VISUAL_TRUECOLOR: + pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp); + pseudo_val |= convert_bitfield(red, &var->red); + pseudo_val |= convert_bitfield(green, &var->green); + pseudo_val |= convert_bitfield(blue, &var->blue); + break; + } + + /* + * Now set our pseudo palette for the CFB16/24/32 drivers. + */ + if (regno < 16) + ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val; + + return ret; +} + +struct par_info { + /* + * Hardware + */ + u_char clock_mult; + u_char clock_div; + u_char extseqmisc; + u_char co_pixfmt; + u_char crtc_ofl; + u_char crtc[19]; + u_int width; + u_int pitch; + u_int fetch; + + /* + * Other + */ + u_char ramdac; +}; + +static const u_char crtc_idx[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18 +}; + +static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb) +{ + unsigned int i; + unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown; + + cyber2000fb_writeb(0x56, 0x3ce, cfb); + i = cyber2000fb_readb(0x3cf, cfb); + cyber2000fb_writeb(i | 4, 0x3cf, cfb); + cyber2000fb_writeb(val, 0x3c6, cfb); + cyber2000fb_writeb(i, 0x3cf, cfb); +} + +static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw) +{ + u_int i; + + /* + * Blank palette + */ + for (i = 0; i < NR_PALETTE; i++) { + cyber2000fb_writeb(i, 0x3c8, cfb); + cyber2000fb_writeb(0, 0x3c9, cfb); + cyber2000fb_writeb(0, 0x3c9, cfb); + cyber2000fb_writeb(0, 0x3c9, cfb); + } + + cyber2000fb_writeb(0xef, 0x3c2, cfb); + cyber2000_crtcw(0x11, 0x0b, cfb); + cyber2000_attrw(0x11, 0x00, cfb); + + cyber2000_seqw(0x00, 0x01, cfb); + cyber2000_seqw(0x01, 0x01, cfb); + cyber2000_seqw(0x02, 0x0f, cfb); + cyber2000_seqw(0x03, 0x00, cfb); + cyber2000_seqw(0x04, 0x0e, cfb); + cyber2000_seqw(0x00, 0x03, cfb); + + for (i = 0; i < sizeof(crtc_idx); i++) + cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb); + + for (i = 0x0a; i < 0x10; i++) + cyber2000_crtcw(i, 0, cfb); + + cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb); + cyber2000_grphw(0x00, 0x00, cfb); + cyber2000_grphw(0x01, 0x00, cfb); + cyber2000_grphw(0x02, 0x00, cfb); + cyber2000_grphw(0x03, 0x00, cfb); + cyber2000_grphw(0x04, 0x00, cfb); + cyber2000_grphw(0x05, 0x60, cfb); + cyber2000_grphw(0x06, 0x05, cfb); + cyber2000_grphw(0x07, 0x0f, cfb); + cyber2000_grphw(0x08, 0xff, cfb); + + /* Attribute controller registers */ + for (i = 0; i < 16; i++) + cyber2000_attrw(i, i, cfb); + + cyber2000_attrw(0x10, 0x01, cfb); + cyber2000_attrw(0x11, 0x00, cfb); + cyber2000_attrw(0x12, 0x0f, cfb); + cyber2000_attrw(0x13, 0x00, cfb); + cyber2000_attrw(0x14, 0x00, cfb); + + /* PLL registers */ + cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb); + cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb); + cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb); + cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb); + cyber2000_grphw(0x90, 0x01, cfb); + cyber2000_grphw(0xb9, 0x80, cfb); + cyber2000_grphw(0xb9, 0x00, cfb); + + cfb->ramdac_ctrl = hw->ramdac; + cyber2000fb_write_ramdac_ctrl(cfb); + + cyber2000fb_writeb(0x20, 0x3c0, cfb); + cyber2000fb_writeb(0xff, 0x3c6, cfb); + + cyber2000_grphw(0x14, hw->fetch, cfb); + cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) | + ((hw->pitch >> 4) & 0x30), cfb); + cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb); + + /* + * Set up accelerator registers + */ + cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb); + cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb); + cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb); +} + +static inline int +cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var) +{ + u_int base = var->yoffset * var->xres_virtual + var->xoffset; + + base *= var->bits_per_pixel; + + /* + * Convert to bytes and shift two extra bits because DAC + * can only start on 4 byte aligned data. + */ + base >>= 5; + + if (base >= 1 << 20) + return -EINVAL; + + cyber2000_grphw(0x10, base >> 16 | 0x10, cfb); + cyber2000_crtcw(0x0c, base >> 8, cfb); + cyber2000_crtcw(0x0d, base, cfb); + + return 0; +} + +static int +cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb, + struct fb_var_screeninfo *var) +{ + u_int Htotal, Hblankend, Hsyncend; + u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend; +#define BIT(v,b1,m,b2) (((v >> b1) & m) << b2) + + hw->crtc[13] = hw->pitch; + hw->crtc[17] = 0xe3; + hw->crtc[14] = 0; + hw->crtc[8] = 0; + + Htotal = var->xres + var->right_margin + + var->hsync_len + var->left_margin; + + if (Htotal > 2080) + return -EINVAL; + + hw->crtc[0] = (Htotal >> 3) - 5; + hw->crtc[1] = (var->xres >> 3) - 1; + hw->crtc[2] = var->xres >> 3; + hw->crtc[4] = (var->xres + var->right_margin) >> 3; + + Hblankend = (Htotal - 4*8) >> 3; + + hw->crtc[3] = BIT(Hblankend, 0, 0x1f, 0) | + BIT(1, 0, 0x01, 7); + + Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3; + + hw->crtc[5] = BIT(Hsyncend, 0, 0x1f, 0) | + BIT(Hblankend, 5, 0x01, 7); + + Vdispend = var->yres - 1; + Vsyncstart = var->yres + var->lower_margin; + Vsyncend = var->yres + var->lower_margin + var->vsync_len; + Vtotal = var->yres + var->lower_margin + var->vsync_len + + var->upper_margin - 2; + + if (Vtotal > 2047) + return -EINVAL; + + Vblankstart = var->yres + 6; + Vblankend = Vtotal - 10; + + hw->crtc[6] = Vtotal; + hw->crtc[7] = BIT(Vtotal, 8, 0x01, 0) | + BIT(Vdispend, 8, 0x01, 1) | + BIT(Vsyncstart, 8, 0x01, 2) | + BIT(Vblankstart,8, 0x01, 3) | + BIT(1, 0, 0x01, 4) | + BIT(Vtotal, 9, 0x01, 5) | + BIT(Vdispend, 9, 0x01, 6) | + BIT(Vsyncstart, 9, 0x01, 7); + hw->crtc[9] = BIT(0, 0, 0x1f, 0) | + BIT(Vblankstart,9, 0x01, 5) | + BIT(1, 0, 0x01, 6); + hw->crtc[10] = Vsyncstart; + hw->crtc[11] = BIT(Vsyncend, 0, 0x0f, 0) | + BIT(1, 0, 0x01, 7); + hw->crtc[12] = Vdispend; + hw->crtc[15] = Vblankstart; + hw->crtc[16] = Vblankend; + hw->crtc[18] = 0xff; + + /* + * overflow - graphics reg 0x11 + * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10 + * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT + */ + hw->crtc_ofl = + BIT(Vtotal, 10, 0x01, 0) | + BIT(Vdispend, 10, 0x01, 1) | + BIT(Vsyncstart, 10, 0x01, 2) | + BIT(Vblankstart,10, 0x01, 3) | + EXT_CRT_VRTOFL_LINECOMP10; + + /* woody: set the interlaced bit... */ + /* FIXME: what about doublescan? */ + if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) + hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE; + + return 0; +} + +/* + * The following was discovered by a good monitor, bit twiddling, theorising + * and but mostly luck. Strangely, it looks like everyone elses' PLL! + * + * Clock registers: + * fclock = fpll / div2 + * fpll = fref * mult / div1 + * where: + * fref = 14.318MHz (69842ps) + * mult = reg0xb0.7:0 + * div1 = (reg0xb1.5:0 + 1) + * div2 = 2^(reg0xb1.7:6) + * fpll should be between 115 and 260 MHz + * (8696ps and 3846ps) + */ +static int +cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb, + struct fb_var_screeninfo *var) +{ + u_long pll_ps = var->pixclock; + const u_long ref_ps = cfb->ref_ps; + u_int div2, t_div1, best_div1, best_mult; + int best_diff; + int vco; + + /* + * Step 1: + * find div2 such that 115MHz < fpll < 260MHz + * and 0 <= div2 < 4 + */ + for (div2 = 0; div2 < 4; div2++) { + u_long new_pll; + + new_pll = pll_ps / cfb->divisors[div2]; + if (8696 > new_pll && new_pll > 3846) { + pll_ps = new_pll; + break; + } + } + + if (div2 == 4) + return -EINVAL; + + /* + * Step 2: + * Given pll_ps and ref_ps, find: + * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005 + * where { 1 < best_div1 < 32, 1 < best_mult < 256 } + * pll_ps_calc = best_div1 / (ref_ps * best_mult) + */ + best_diff = 0x7fffffff; + best_mult = 32; + best_div1 = 255; + for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) { + u_int rr, t_mult, t_pll_ps; + int diff; + + /* + * Find the multiplier for this divisor + */ + rr = ref_ps * t_div1; + t_mult = (rr + pll_ps / 2) / pll_ps; + + /* + * Is the multiplier within the correct range? + */ + if (t_mult > 256 || t_mult < 2) + continue; + + /* + * Calculate the actual clock period from this multiplier + * and divisor, and estimate the error. + */ + t_pll_ps = (rr + t_mult / 2) / t_mult; + diff = pll_ps - t_pll_ps; + if (diff < 0) + diff = -diff; + + if (diff < best_diff) { + best_diff = diff; + best_mult = t_mult; + best_div1 = t_div1; + } + + /* + * If we hit an exact value, there is no point in continuing. + */ + if (diff == 0) + break; + } + + /* + * Step 3: + * combine values + */ + hw->clock_mult = best_mult - 1; + hw->clock_div = div2 << 6 | (best_div1 - 1); + + vco = ref_ps * best_div1 / best_mult; + if ((ref_ps == 40690) && (vco < 5556)) + /* Set VFSEL when VCO > 180MHz (5.556 ps). */ + hw->clock_div |= EXT_DCLK_DIV_VFSEL; + + return 0; +} + +/* + * Set the User Defined Part of the Display + */ +static int +cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct cfb_info *cfb = (struct cfb_info *)info; + struct par_info hw; + unsigned int mem; + int err; + + var->transp.msb_right = 0; + var->red.msb_right = 0; + var->green.msb_right = 0; + var->blue.msb_right = 0; + + switch (var->bits_per_pixel) { + case 8: /* PSEUDOCOLOUR, 256 */ + var->transp.offset = 0; + var->transp.length = 0; + var->red.offset = 0; + var->red.length = 8; + var->green.offset = 0; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + break; + + case 16:/* DIRECTCOLOUR, 64k or 32k */ + switch (var->green.length) { + case 6: /* RGB565, 64k */ + var->transp.offset = 0; + var->transp.length = 0; + var->red.offset = 11; + var->red.length = 5; + var->green.offset = 5; + var->green.length = 6; + var->blue.offset = 0; + var->blue.length = 5; + break; + + default: + case 5: /* RGB555, 32k */ + var->transp.offset = 0; + var->transp.length = 0; + var->red.offset = 10; + var->red.length = 5; + var->green.offset = 5; + var->green.length = 5; + var->blue.offset = 0; + var->blue.length = 5; + break; + + case 4: /* RGB444, 4k + transparency? */ + var->transp.offset = 12; + var->transp.length = 4; + var->red.offset = 8; + var->red.length = 4; + var->green.offset = 4; + var->green.length = 4; + var->blue.offset = 0; + var->blue.length = 4; + break; + } + break; + + case 24:/* TRUECOLOUR, 16m */ + var->transp.offset = 0; + var->transp.length = 0; + var->red.offset = 16; + var->red.length = 8; + var->green.offset = 8; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + break; + + case 32:/* TRUECOLOUR, 16m */ + var->transp.offset = 24; + var->transp.length = 8; + var->red.offset = 16; + var->red.length = 8; + var->green.offset = 8; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + break; + + default: + return -EINVAL; + } + + mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8); + if (mem > cfb->fb.fix.smem_len) + var->yres_virtual = cfb->fb.fix.smem_len * 8 / + (var->bits_per_pixel * var->xres_virtual); + + if (var->yres > var->yres_virtual) + var->yres = var->yres_virtual; + if (var->xres > var->xres_virtual) + var->xres = var->xres_virtual; + + err = cyber2000fb_decode_clock(&hw, cfb, var); + if (err) + return err; + + err = cyber2000fb_decode_crtc(&hw, cfb, var); + if (err) + return err; + + return 0; +} + +static int cyber2000fb_set_par(struct fb_info *info) +{ + struct cfb_info *cfb = (struct cfb_info *)info; + struct fb_var_screeninfo *var = &cfb->fb.var; + struct par_info hw; + unsigned int mem; + + hw.width = var->xres_virtual; + hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT; + + switch (var->bits_per_pixel) { + case 8: + hw.co_pixfmt = CO_PIXFMT_8BPP; + hw.pitch = hw.width >> 3; + hw.extseqmisc = EXT_SEQ_MISC_8; + break; + + case 16: + hw.co_pixfmt = CO_PIXFMT_16BPP; + hw.pitch = hw.width >> 2; + + switch (var->green.length) { + case 6: /* RGB565, 64k */ + hw.extseqmisc = EXT_SEQ_MISC_16_RGB565; + break; + case 5: /* RGB555, 32k */ + hw.extseqmisc = EXT_SEQ_MISC_16_RGB555; + break; + case 4: /* RGB444, 4k + transparency? */ + hw.extseqmisc = EXT_SEQ_MISC_16_RGB444; + break; + default: + BUG(); + } + case 24:/* TRUECOLOUR, 16m */ + hw.co_pixfmt = CO_PIXFMT_24BPP; + hw.width *= 3; + hw.pitch = hw.width >> 3; + hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); + hw.extseqmisc = EXT_SEQ_MISC_24_RGB888; + break; + + case 32:/* TRUECOLOUR, 16m */ + hw.co_pixfmt = CO_PIXFMT_32BPP; + hw.pitch = hw.width >> 1; + hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); + hw.extseqmisc = EXT_SEQ_MISC_32; + break; + + default: + BUG(); + } + + /* + * Sigh, this is absolutely disgusting, but caused by + * the way the fbcon developers want to separate out + * the "checking" and the "setting" of the video mode. + * + * If the mode is not suitable for the hardware here, + * we can't prevent it being set by returning an error. + * + * In theory, since NetWinders contain just one VGA card, + * we should never end up hitting this problem. + */ + BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0); + BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0); + + hw.width -= 1; + hw.fetch = hw.pitch; + if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT)) + hw.fetch <<= 1; + hw.fetch += 1; + + cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; + + /* + * Same here - if the size of the video mode exceeds the + * available RAM, we can't prevent this mode being set. + * + * In theory, since NetWinders contain just one VGA card, + * we should never end up hitting this problem. + */ + mem = cfb->fb.fix.line_length * var->yres_virtual; + BUG_ON(mem > cfb->fb.fix.smem_len); + + /* + * 8bpp displays are always pseudo colour. 16bpp and above + * are direct colour or true colour, depending on whether + * the RAMDAC palettes are bypassed. (Direct colour has + * palettes, true colour does not.) + */ + if (var->bits_per_pixel == 8) + cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; + else if (hw.ramdac & RAMDAC_BYPASS) + cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + else + cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR; + + cyber2000fb_set_timing(cfb, &hw); + cyber2000fb_update_start(cfb, var); + + return 0; +} + + +/* + * Pan or Wrap the Display + */ +static int +cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct cfb_info *cfb = (struct cfb_info *)info; + + if (cyber2000fb_update_start(cfb, var)) + return -EINVAL; + + cfb->fb.var.xoffset = var->xoffset; + cfb->fb.var.yoffset = var->yoffset; + + if (var->vmode & FB_VMODE_YWRAP) { + cfb->fb.var.vmode |= FB_VMODE_YWRAP; + } else { + cfb->fb.var.vmode &= ~FB_VMODE_YWRAP; + } + + return 0; +} + +/* + * (Un)Blank the display. + * + * Blank the screen if blank_mode != 0, else unblank. If + * blank == NULL then the caller blanks by setting the CLUT + * (Color Look Up Table) to all black. Return 0 if blanking + * succeeded, != 0 if un-/blanking failed due to e.g. a + * video mode which doesn't support it. Implements VESA + * suspend and powerdown modes on hardware that supports + * disabling hsync/vsync: + * blank_mode == 2: suspend vsync + * blank_mode == 3: suspend hsync + * blank_mode == 4: powerdown + * + * wms...Enable VESA DMPS compatible powerdown mode + * run "setterm -powersave powerdown" to take advantage + */ +static int cyber2000fb_blank(int blank, struct fb_info *info) +{ + struct cfb_info *cfb = (struct cfb_info *)info; + unsigned int sync = 0; + int i; + + switch (blank) { + case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */ + sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0; + break; + case FB_BLANK_HSYNC_SUSPEND: /* hsync off */ + sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0; + break; + case FB_BLANK_VSYNC_SUSPEND: /* vsync off */ + sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL; + break; + case FB_BLANK_NORMAL: /* soft blank */ + default: /* unblank */ + break; + } + + cyber2000_grphw(EXT_SYNC_CTL, sync, cfb); + + if (blank <= 1) { + /* turn on ramdacs */ + cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN); + cyber2000fb_write_ramdac_ctrl(cfb); + } + + /* + * Soft blank/unblank the display. + */ + if (blank) { /* soft blank */ + for (i = 0; i < NR_PALETTE; i++) { + cyber2000fb_writeb(i, 0x3c8, cfb); + cyber2000fb_writeb(0, 0x3c9, cfb); + cyber2000fb_writeb(0, 0x3c9, cfb); + cyber2000fb_writeb(0, 0x3c9, cfb); + } + } else { /* unblank */ + for (i = 0; i < NR_PALETTE; i++) { + cyber2000fb_writeb(i, 0x3c8, cfb); + cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb); + cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb); + cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb); + } + } + + if (blank >= 2) { + /* turn off ramdacs */ + cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN; + cyber2000fb_write_ramdac_ctrl(cfb); + } + + return 0; +} + +static struct fb_ops cyber2000fb_ops = { + .owner = THIS_MODULE, + .fb_check_var = cyber2000fb_check_var, + .fb_set_par = cyber2000fb_set_par, + .fb_setcolreg = cyber2000fb_setcolreg, + .fb_blank = cyber2000fb_blank, + .fb_pan_display = cyber2000fb_pan_display, + .fb_fillrect = cyber2000fb_fillrect, + .fb_copyarea = cyber2000fb_copyarea, + .fb_imageblit = cyber2000fb_imageblit, + .fb_cursor = soft_cursor, + .fb_sync = cyber2000fb_sync, +}; + +/* + * This is the only "static" reference to the internal data structures + * of this driver. It is here solely at the moment to support the other + * CyberPro modules external to this driver. + */ +static struct cfb_info *int_cfb_info; + +/* + * Enable access to the extended registers + */ +void cyber2000fb_enable_extregs(struct cfb_info *cfb) +{ + cfb->func_use_count += 1; + + if (cfb->func_use_count == 1) { + int old; + + old = cyber2000_grphr(EXT_FUNC_CTL, cfb); + old |= EXT_FUNC_CTL_EXTREGENBL; + cyber2000_grphw(EXT_FUNC_CTL, old, cfb); + } +} + +/* + * Disable access to the extended registers + */ +void cyber2000fb_disable_extregs(struct cfb_info *cfb) +{ + if (cfb->func_use_count == 1) { + int old; + + old = cyber2000_grphr(EXT_FUNC_CTL, cfb); + old &= ~EXT_FUNC_CTL_EXTREGENBL; + cyber2000_grphw(EXT_FUNC_CTL, old, cfb); + } + + if (cfb->func_use_count == 0) + printk(KERN_ERR "disable_extregs: count = 0\n"); + else + cfb->func_use_count -= 1; +} + +void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var) +{ + memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo)); +} + +/* + * Attach a capture/tv driver to the core CyberX0X0 driver. + */ +int cyber2000fb_attach(struct cyberpro_info *info, int idx) +{ + if (int_cfb_info != NULL) { + info->dev = int_cfb_info->dev; + info->regs = int_cfb_info->regs; + info->fb = int_cfb_info->fb.screen_base; + info->fb_size = int_cfb_info->fb.fix.smem_len; + info->enable_extregs = cyber2000fb_enable_extregs; + info->disable_extregs = cyber2000fb_disable_extregs; + info->info = int_cfb_info; + + strlcpy(info->dev_name, int_cfb_info->fb.fix.id, sizeof(info->dev_name)); + } + + return int_cfb_info != NULL; +} + +/* + * Detach a capture/tv driver from the core CyberX0X0 driver. + */ +void cyber2000fb_detach(int idx) +{ +} + +EXPORT_SYMBOL(cyber2000fb_attach); +EXPORT_SYMBOL(cyber2000fb_detach); +EXPORT_SYMBOL(cyber2000fb_enable_extregs); +EXPORT_SYMBOL(cyber2000fb_disable_extregs); +EXPORT_SYMBOL(cyber2000fb_get_fb_var); + +/* + * These parameters give + * 640x480, hsync 31.5kHz, vsync 60Hz + */ +static struct fb_videomode __devinitdata cyber2000fb_default_mode = { + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39722, + .left_margin = 56, + .right_margin = 16, + .upper_margin = 34, + .lower_margin = 9, + .hsync_len = 88, + .vsync_len = 2, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED +}; + +static char igs_regs[] = { + EXT_CRT_IRQ, 0, + EXT_CRT_TEST, 0, + EXT_SYNC_CTL, 0, + EXT_SEG_WRITE_PTR, 0, + EXT_SEG_READ_PTR, 0, + EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE | + EXT_BIU_MISC_COP_ENABLE | + EXT_BIU_MISC_COP_BFC, + EXT_FUNC_CTL, 0, + CURS_H_START, 0, + CURS_H_START + 1, 0, + CURS_H_PRESET, 0, + CURS_V_START, 0, + CURS_V_START + 1, 0, + CURS_V_PRESET, 0, + CURS_CTL, 0, + EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT, + EXT_OVERSCAN_RED, 0, + EXT_OVERSCAN_GREEN, 0, + EXT_OVERSCAN_BLUE, 0, + + /* some of these are questionable when we have a BIOS */ + EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK | + EXT_MEM_CTL0_RAS_1 | + EXT_MEM_CTL0_MULTCAS, + EXT_HIDDEN_CTL1, 0x30, + EXT_FIFO_CTL, 0x0b, + EXT_FIFO_CTL + 1, 0x17, + 0x76, 0x00, + EXT_HIDDEN_CTL4, 0xc8 +}; + +/* + * Initialise the CyberPro hardware. On the CyberPro5XXXX, + * ensure that we're using the correct PLL (5XXX's may be + * programmed to use an additional set of PLLs.) + */ +static void cyberpro_init_hw(struct cfb_info *cfb) +{ + int i; + + for (i = 0; i < sizeof(igs_regs); i += 2) + cyber2000_grphw(igs_regs[i], igs_regs[i+1], cfb); + + if (cfb->id == ID_CYBERPRO_5000) { + unsigned char val; + cyber2000fb_writeb(0xba, 0x3ce, cfb); + val = cyber2000fb_readb(0x3cf, cfb) & 0x80; + cyber2000fb_writeb(val, 0x3cf, cfb); + } +} + +static struct cfb_info * __devinit +cyberpro_alloc_fb_info(unsigned int id, char *name) +{ + struct cfb_info *cfb; + + cfb = kmalloc(sizeof(struct cfb_info) + + sizeof(u32) * 16, GFP_KERNEL); + + if (!cfb) + return NULL; + + memset(cfb, 0, sizeof(struct cfb_info)); + + cfb->id = id; + + if (id == ID_CYBERPRO_5000) + cfb->ref_ps = 40690; // 24.576 MHz + else + cfb->ref_ps = 69842; // 14.31818 MHz (69841?) + + cfb->divisors[0] = 1; + cfb->divisors[1] = 2; + cfb->divisors[2] = 4; + + if (id == ID_CYBERPRO_2000) + cfb->divisors[3] = 8; + else + cfb->divisors[3] = 6; + + strcpy(cfb->fb.fix.id, name); + + cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; + cfb->fb.fix.type_aux = 0; + cfb->fb.fix.xpanstep = 0; + cfb->fb.fix.ypanstep = 1; + cfb->fb.fix.ywrapstep = 0; + + switch (id) { + case ID_IGA_1682: + cfb->fb.fix.accel = 0; + break; + + case ID_CYBERPRO_2000: + cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000; + break; + + case ID_CYBERPRO_2010: + cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010; + break; + + case ID_CYBERPRO_5000: + cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000; + break; + } + + cfb->fb.var.nonstd = 0; + cfb->fb.var.activate = FB_ACTIVATE_NOW; + cfb->fb.var.height = -1; + cfb->fb.var.width = -1; + cfb->fb.var.accel_flags = FB_ACCELF_TEXT; + + cfb->fb.fbops = &cyber2000fb_ops; + cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; + cfb->fb.pseudo_palette = (void *)(cfb + 1); + + fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0); + + return cfb; +} + +static void +cyberpro_free_fb_info(struct cfb_info *cfb) +{ + if (cfb) { + /* + * Free the colourmap + */ + fb_alloc_cmap(&cfb->fb.cmap, 0, 0); + + kfree(cfb); + } +} + +/* + * Parse Cyber2000fb options. Usage: + * video=cyber2000:font:fontname + */ +#ifndef MODULE +static int +cyber2000fb_setup(char *options) +{ + char *opt; + + if (!options || !*options) + return 0; + + while ((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + + if (strncmp(opt, "font:", 5) == 0) { + static char default_font_storage[40]; + + strlcpy(default_font_storage, opt + 5, sizeof(default_font_storage)); + default_font = default_font_storage; + continue; + } + + printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt); + } + return 0; +} +#endif /* MODULE */ + +/* + * The CyberPro chips can be placed on many different bus types. + * This probe function is common to all bus types. The bus-specific + * probe function is expected to have: + * - enabled access to the linear memory region + * - memory mapped access to the registers + * - initialised mem_ctl1 and mem_ctl2 appropriately. + */ +static int __devinit cyberpro_common_probe(struct cfb_info *cfb) +{ + u_long smem_size; + u_int h_sync, v_sync; + int err; + + cyberpro_init_hw(cfb); + + /* + * Get the video RAM size and width from the VGA register. + * This should have been already initialised by the BIOS, + * but if it's garbage, claim default 1MB VRAM (woody) + */ + cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb); + cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb); + + /* + * Determine the size of the memory. + */ + switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) { + case MEM_CTL2_SIZE_4MB: smem_size = 0x00400000; break; + case MEM_CTL2_SIZE_2MB: smem_size = 0x00200000; break; + case MEM_CTL2_SIZE_1MB: smem_size = 0x00100000; break; + default: smem_size = 0x00100000; break; + } + + cfb->fb.fix.smem_len = smem_size; + cfb->fb.fix.mmio_len = MMIO_SIZE; + cfb->fb.screen_base = cfb->region; + + err = -EINVAL; + if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0, + &cyber2000fb_default_mode, 8)) { + printk("%s: no valid mode found\n", cfb->fb.fix.id); + goto failed; + } + + cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 / + (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual); + + if (cfb->fb.var.yres_virtual < cfb->fb.var.yres) + cfb->fb.var.yres_virtual = cfb->fb.var.yres; + +// fb_set_var(&cfb->fb.var, -1, &cfb->fb); + + /* + * Calculate the hsync and vsync frequencies. Note that + * we split the 1e12 constant up so that we can preserve + * the precision and fit the results into 32-bit registers. + * (1953125000 * 512 = 1e12) + */ + h_sync = 1953125000 / cfb->fb.var.pixclock; + h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin + + cfb->fb.var.right_margin + cfb->fb.var.hsync_len); + v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin + + cfb->fb.var.lower_margin + cfb->fb.var.vsync_len); + + printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n", + cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10, + cfb->fb.var.xres, cfb->fb.var.yres, + h_sync / 1000, h_sync % 1000, v_sync); + + if (cfb->dev) + cfb->fb.device = &cfb->dev->dev; + err = register_framebuffer(&cfb->fb); + +failed: + return err; +} + +static void cyberpro_common_resume(struct cfb_info *cfb) +{ + cyberpro_init_hw(cfb); + + /* + * Reprogram the MEM_CTL1 and MEM_CTL2 registers + */ + cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb); + cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb); + + /* + * Restore the old video mode and the palette. + * We also need to tell fbcon to redraw the console. + */ + cyber2000fb_set_par(&cfb->fb); +} + +#ifdef CONFIG_ARCH_SHARK + +#include <asm/arch/hardware.h> + +static int __devinit +cyberpro_vl_probe(void) +{ + struct cfb_info *cfb; + int err = -ENOMEM; + + if (!request_mem_region(FB_START,FB_SIZE,"CyberPro2010")) return err; + + cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010"); + if (!cfb) + goto failed_release; + + cfb->dev = NULL; + cfb->region = ioremap(FB_START,FB_SIZE); + if (!cfb->region) + goto failed_ioremap; + + cfb->regs = cfb->region + MMIO_OFFSET; + cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET; + cfb->fb.fix.smem_start = FB_START; + + /* + * Bring up the hardware. This is expected to enable access + * to the linear memory region, and allow access to the memory + * mapped registers. Also, mem_ctl1 and mem_ctl2 must be + * initialised. + */ + cyber2000fb_writeb(0x18, 0x46e8, cfb); + cyber2000fb_writeb(0x01, 0x102, cfb); + cyber2000fb_writeb(0x08, 0x46e8, cfb); + cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb); + cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb); + + cfb->mclk_mult = 0xdb; + cfb->mclk_div = 0x54; + + err = cyberpro_common_probe(cfb); + if (err) + goto failed; + + if (int_cfb_info == NULL) + int_cfb_info = cfb; + + return 0; + +failed: + iounmap(cfb->region); +failed_ioremap: + cyberpro_free_fb_info(cfb); +failed_release: + release_mem_region(FB_START,FB_SIZE); + + return err; +} +#endif /* CONFIG_ARCH_SHARK */ + +/* + * PCI specific support. + */ +#ifdef CONFIG_PCI +/* + * We need to wake up the CyberPro, and make sure its in linear memory + * mode. Unfortunately, this is specific to the platform and card that + * we are running on. + * + * On x86 and ARM, should we be initialising the CyberPro first via the + * IO registers, and then the MMIO registers to catch all cases? Can we + * end up in the situation where the chip is in MMIO mode, but not awake + * on an x86 system? + */ +static int cyberpro_pci_enable_mmio(struct cfb_info *cfb) +{ + unsigned char val; + +#if defined(__sparc_v9__) +#error "You lose, consult DaveM." +#elif defined(__sparc__) + /* + * SPARC does not have an "outb" instruction, so we generate + * I/O cycles storing into a reserved memory space at + * physical address 0x3000000 + */ + unsigned char *iop; + + iop = ioremap(0x3000000, 0x5000); + if (iop == NULL) { + prom_printf("iga5000: cannot map I/O\n"); + return -ENOMEM; + } + + writeb(0x18, iop + 0x46e8); + writeb(0x01, iop + 0x102); + writeb(0x08, iop + 0x46e8); + writeb(EXT_BIU_MISC, iop + 0x3ce); + writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf); + + iounmap((void *)iop); +#else + /* + * Most other machine types are "normal", so + * we use the standard IO-based wakeup. + */ + outb(0x18, 0x46e8); + outb(0x01, 0x102); + outb(0x08, 0x46e8); + outb(EXT_BIU_MISC, 0x3ce); + outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf); +#endif + + /* + * Allow the CyberPro to accept PCI burst accesses + */ + val = cyber2000_grphr(EXT_BUS_CTL, cfb); + if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) { + printk(KERN_INFO "%s: enabling PCI bursts\n", cfb->fb.fix.id); + + val |= EXT_BUS_CTL_PCIBURST_WRITE; + + if (cfb->id == ID_CYBERPRO_5000) + val |= EXT_BUS_CTL_PCIBURST_READ; + + cyber2000_grphw(EXT_BUS_CTL, val, cfb); + } + + return 0; +} + +static int __devinit +cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct cfb_info *cfb; + char name[16]; + int err; + + sprintf(name, "CyberPro%4X", id->device); + + err = pci_enable_device(dev); + if (err) + return err; + + err = pci_request_regions(dev, name); + if (err) + return err; + + err = -ENOMEM; + cfb = cyberpro_alloc_fb_info(id->driver_data, name); + if (!cfb) + goto failed_release; + + cfb->dev = dev; + cfb->region = ioremap(pci_resource_start(dev, 0), + pci_resource_len(dev, 0)); + if (!cfb->region) + goto failed_ioremap; + + cfb->regs = cfb->region + MMIO_OFFSET; + cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET; + cfb->fb.fix.smem_start = pci_resource_start(dev, 0); + + /* + * Bring up the hardware. This is expected to enable access + * to the linear memory region, and allow access to the memory + * mapped registers. Also, mem_ctl1 and mem_ctl2 must be + * initialised. + */ + err = cyberpro_pci_enable_mmio(cfb); + if (err) + goto failed; + + /* + * Use MCLK from BIOS. FIXME: what about hotplug? + */ + cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb); + cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb); + +#ifdef __arm__ + /* + * MCLK on the NetWinder and the Shark is fixed at 75MHz + */ + if (machine_is_netwinder()) { + cfb->mclk_mult = 0xdb; + cfb->mclk_div = 0x54; + } +#endif + + err = cyberpro_common_probe(cfb); + if (err) + goto failed; + + /* + * Our driver data + */ + pci_set_drvdata(dev, cfb); + if (int_cfb_info == NULL) + int_cfb_info = cfb; + + return 0; + +failed: + iounmap(cfb->region); +failed_ioremap: + cyberpro_free_fb_info(cfb); +failed_release: + pci_release_regions(dev); + + return err; +} + +static void __devexit cyberpro_pci_remove(struct pci_dev *dev) +{ + struct cfb_info *cfb = pci_get_drvdata(dev); + + if (cfb) { + /* + * If unregister_framebuffer fails, then + * we will be leaving hooks that could cause + * oopsen laying around. + */ + if (unregister_framebuffer(&cfb->fb)) + printk(KERN_WARNING "%s: danger Will Robinson, " + "danger danger! Oopsen imminent!\n", + cfb->fb.fix.id); + iounmap(cfb->region); + cyberpro_free_fb_info(cfb); + + /* + * Ensure that the driver data is no longer + * valid. + */ + pci_set_drvdata(dev, NULL); + if (cfb == int_cfb_info) + int_cfb_info = NULL; + + pci_release_regions(dev); + } +} + +static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state) +{ + return 0; +} + +/* + * Re-initialise the CyberPro hardware + */ +static int cyberpro_pci_resume(struct pci_dev *dev) +{ + struct cfb_info *cfb = pci_get_drvdata(dev); + + if (cfb) { + cyberpro_pci_enable_mmio(cfb); + cyberpro_common_resume(cfb); + } + + return 0; +} + +static struct pci_device_id cyberpro_pci_table[] = { +// Not yet +// { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682, +// PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 }, + { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 }, + { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 }, + { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci,cyberpro_pci_table); + +static struct pci_driver cyberpro_driver = { + .name = "CyberPro", + .probe = cyberpro_pci_probe, + .remove = __devexit_p(cyberpro_pci_remove), + .suspend = cyberpro_pci_suspend, + .resume = cyberpro_pci_resume, + .id_table = cyberpro_pci_table +}; +#endif + +/* + * I don't think we can use the "module_init" stuff here because + * the fbcon stuff may not be initialised yet. Hence the #ifdef + * around module_init. + * + * Tony: "module_init" is now required + */ +static int __init cyber2000fb_init(void) +{ + int ret = -1, err; + +#ifndef MODULE + char *option = NULL; + + if (fb_get_options("cyber2000fb", &option)) + return -ENODEV; + cyber2000fb_setup(option); +#endif + +#ifdef CONFIG_ARCH_SHARK + err = cyberpro_vl_probe(); + if (!err) { + ret = 0; + __module_get(THIS_MODULE); + } +#endif +#ifdef CONFIG_PCI + err = pci_register_driver(&cyberpro_driver); + if (!err) + ret = 0; +#endif + + return ret ? err : 0; +} + +static void __exit cyberpro_exit(void) +{ + pci_unregister_driver(&cyberpro_driver); +} + +module_init(cyber2000fb_init); +module_exit(cyberpro_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver"); +MODULE_LICENSE("GPL"); |